diff options
Diffstat (limited to 'drivers/tty/serial/serial_core.c')
-rw-r--r-- | drivers/tty/serial/serial_core.c | 90 |
1 files changed, 66 insertions, 24 deletions
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f1348a509552..d6a58a9e072a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state) * enabled, serial_port_runtime_resume() calls start_tx() again * after enabling the device. */ - if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev)) + if (pm_runtime_active(&port_dev->dev)) port->ops->start_tx(port); pm_runtime_mark_last_busy(&port_dev->dev); pm_runtime_put_autosuspend(&port_dev->dev); @@ -410,11 +410,10 @@ void uart_update_timeout(struct uart_port *port, unsigned int cflag, unsigned int baud) { - unsigned int size = tty_get_frame_size(cflag); - u64 frame_time; + u64 temp = tty_get_frame_size(cflag); - frame_time = (u64)size * NSEC_PER_SEC; - port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud); + temp *= NSEC_PER_SEC; + port->frame_time = (unsigned int)DIV64_U64_ROUND_UP(temp, baud); } EXPORT_SYMBOL(uart_update_timeout); @@ -687,7 +686,7 @@ EXPORT_SYMBOL_GPL(uart_xchar_out); * This function is used to send a high-priority XON/XOFF character to * the device */ -static void uart_send_xchar(struct tty_struct *tty, char ch) +static void uart_send_xchar(struct tty_struct *tty, u8 ch) { struct uart_state *state = tty->driver_data; struct uart_port *port; @@ -1085,8 +1084,8 @@ static int uart_tiocmget(struct tty_struct *tty) goto out; if (!tty_io_error(tty)) { - result = uport->mctrl; uart_port_lock_irq(uport); + result = uport->mctrl; result |= uport->ops->get_mctrl(uport); uart_port_unlock_irq(uport); } @@ -1371,20 +1370,34 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4 return; } - /* Pick sane settings if the user hasn't */ - if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) && - !(rs485->flags & SER_RS485_RTS_ON_SEND) == - !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { - dev_warn_ratelimited(port->dev, - "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", - port->name, port->line); - rs485->flags |= SER_RS485_RTS_ON_SEND; - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - supported_flags |= SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND; + /* Clear other RS485 flags but SER_RS485_TERMINATE_BUS and return if enabling RS422 */ + if (rs485->flags & SER_RS485_MODE_RS422) { + rs485->flags &= (SER_RS485_ENABLED | SER_RS485_MODE_RS422 | SER_RS485_TERMINATE_BUS); + return; } rs485->flags &= supported_flags; + /* Pick sane settings if the user hasn't */ + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { + if (supported_flags & SER_RS485_RTS_ON_SEND) { + rs485->flags |= SER_RS485_RTS_ON_SEND; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", + port->name, port->line); + } else { + rs485->flags |= SER_RS485_RTS_AFTER_SEND; + rs485->flags &= ~SER_RS485_RTS_ON_SEND; + + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n", + port->name, port->line); + } + } + uart_sanitize_serial_rs485_delays(port, rs485); /* Return clean padding area to userspace */ @@ -1402,6 +1415,16 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); } +static void uart_set_rs485_rx_during_tx(struct uart_port *port, + const struct serial_rs485 *rs485) +{ + if (!(rs485->flags & SER_RS485_ENABLED)) + return; + + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(rs485->flags & SER_RS485_RX_DURING_TX)); +} + static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; @@ -1413,12 +1436,17 @@ static int uart_rs485_config(struct uart_port *port) uart_sanitize_serial_rs485(port, rs485); uart_set_rs485_termination(port, rs485); + uart_set_rs485_rx_during_tx(port, rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, NULL, rs485); uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { memset(rs485, 0, sizeof(*rs485)); + /* unset GPIOs */ + gpiod_set_value_cansleep(port->rs485_term_gpio, 0); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0); + } return ret; } @@ -1446,7 +1474,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, int ret; unsigned long flags; - if (!port->rs485_config) + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) return -ENOTTY; if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) @@ -1457,6 +1485,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, return ret; uart_sanitize_serial_rs485(port, &rs485); uart_set_rs485_termination(port, &rs485); + uart_set_rs485_rx_during_tx(port, &rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, &tty->termios, &rs485); @@ -1468,8 +1497,14 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, port->ops->set_mctrl(port, port->mctrl); } uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { + /* restore old GPIO settings */ + gpiod_set_value_cansleep(port->rs485_term_gpio, + !!(port->rs485.flags & SER_RS485_TERMINATE_BUS)); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(port->rs485.flags & SER_RS485_RX_DURING_TX)); return ret; + } if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485))) return -EFAULT; @@ -2342,7 +2377,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - tty_dev = device_find_child(uport->dev, &match, serial_match_port); + tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port); if (tty_dev && device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); put_device(tty_dev); @@ -2423,7 +2458,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - tty_dev = device_find_child(uport->dev, &match, serial_match_port); + tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq)))) disable_irq_wake(uport->irq); @@ -2633,7 +2668,8 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options) mutex_lock(&tport->mutex); port = uart_port_check(state); - if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) { + if (!port || port->type == PORT_UNKNOWN || + !(port->ops->poll_get_char && port->ops->poll_put_char)) { ret = -1; goto out; } @@ -3153,7 +3189,8 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u * setserial to be used to alter this port's parameters. */ tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver, - uport->line, uport->dev, port, uport->tty_groups); + uport->line, uport->dev, &uport->port_dev->dev, port, + uport->tty_groups); if (!IS_ERR(tty_dev)) { device_set_wakeup_capable(tty_dev, 1); } else { @@ -3570,6 +3607,9 @@ int uart_get_rs485_mode(struct uart_port *port) u32 rs485_delay[2]; int ret; + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) + return 0; + ret = device_property_read_u32_array(dev, "rs485-rts-delay", rs485_delay, 2); if (!ret) { @@ -3620,6 +3660,8 @@ int uart_get_rs485_mode(struct uart_port *port) if (IS_ERR(desc)) return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n"); port->rs485_rx_during_tx_gpio = desc; + if (port->rs485_rx_during_tx_gpio) + port->rs485_supported.flags |= SER_RS485_RX_DURING_TX; return 0; } |