diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_em.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_fsl.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 4 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 2 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 23 | ||||
-rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 11 |
6 files changed, 26 insertions, 22 deletions
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index f8e99995eee9..d94c3811a8f7 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -106,8 +106,8 @@ static int serial8250_em_probe(struct platform_device *pdev) memset(&up, 0, sizeof(up)); up.port.mapbase = regs->start; up.port.irq = irq; - up.port.type = PORT_UNKNOWN; - up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP; + up.port.type = PORT_16750; + up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE; up.port.dev = &pdev->dev; up.port.private_data = priv; diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index 8aad15622a2e..8adfaa183f77 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -34,7 +34,7 @@ int fsl8250_handle_irq(struct uart_port *port) iir = port->serial_in(port, UART_IIR); if (iir & UART_IIR_NO_INT) { - spin_unlock(&up->port.lock); + spin_unlock_irqrestore(&up->port.lock, flags); return 0; } @@ -42,7 +42,7 @@ int fsl8250_handle_irq(struct uart_port *port) if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { up->lsr_saved_flags &= ~UART_LSR_BI; port->serial_in(port, UART_RX); - spin_unlock(&up->port.lock); + spin_unlock_irqrestore(&up->port.lock, flags); return 1; } diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 978dc196c29b..5313aa31930f 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -257,8 +257,9 @@ config SERIAL_8250_ASPEED_VUART tristate "Aspeed Virtual UART" depends on SERIAL_8250 depends on OF - depends on REGMAP && MFD_SYSCON + depends on MFD_SYSCON depends on ARCH_ASPEED || COMPILE_TEST + select REGMAP help If you want to use the virtual UART (VUART) device on Aspeed BMC platforms, enable this option. This enables the 16550A- @@ -299,7 +300,6 @@ config SERIAL_8250_PCI1XXXX tristate "Microchip 8250 based serial port" depends on SERIAL_8250 && PCI select SERIAL_8250_PCILIB - default SERIAL_8250 help Select this option if you have a setup with Microchip PCIe Switch with serial port enabled and wish to enable 8250 diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 625358f44419..0072892ca7fc 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1313,7 +1313,7 @@ config SERIAL_FSL_LPUART config SERIAL_FSL_LPUART_CONSOLE bool "Console on Freescale lpuart serial port" - depends on SERIAL_FSL_LPUART + depends on SERIAL_FSL_LPUART=y select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index e945f41b93d4..56e6ba3250cd 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1354,6 +1354,7 @@ static void lpuart_dma_rx_free(struct uart_port *port) struct dma_chan *chan = sport->dma_rx_chan; dmaengine_terminate_sync(chan); + del_timer_sync(&sport->lpuart_timer); dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE); kfree(sport->rx_ring.buf); sport->rx_ring.tail = 0; @@ -1813,7 +1814,6 @@ static int lpuart32_startup(struct uart_port *port) static void lpuart_dma_shutdown(struct lpuart_port *sport) { if (sport->lpuart_dma_rx_use) { - del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); sport->lpuart_dma_rx_use = false; } @@ -1973,10 +1973,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios, * Since timer function acqures sport->port.lock, need to stop before * acquring same lock because otherwise del_timer_sync() can deadlock. */ - if (old && sport->lpuart_dma_rx_use) { - del_timer_sync(&sport->lpuart_timer); + if (old && sport->lpuart_dma_rx_use) lpuart_dma_rx_free(&sport->port); - } spin_lock_irqsave(&sport->port.lock, flags); @@ -2210,10 +2208,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, * Since timer function acqures sport->port.lock, need to stop before * acquring same lock because otherwise del_timer_sync() can deadlock. */ - if (old && sport->lpuart_dma_rx_use) { - del_timer_sync(&sport->lpuart_timer); + if (old && sport->lpuart_dma_rx_use) lpuart_dma_rx_free(&sport->port); - } spin_lock_irqsave(&sport->port.lock, flags); @@ -2240,9 +2236,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, /* update the per-port timeout */ uart_update_timeout(port, termios->c_cflag, baud); - /* wait transmit engin complete */ - lpuart32_write(&sport->port, 0, UARTMODIR); - lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + /* + * LPUART Transmission Complete Flag may never be set while queuing a break + * character, so skip waiting for transmission complete when UARTCTRL_SBK is + * asserted. + */ + if (!(old_ctrl & UARTCTRL_SBK)) { + lpuart32_write(&sport->port, 0, UARTMODIR); + lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); + } /* disable transmit and receive */ lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), @@ -3014,7 +3016,6 @@ static int lpuart_suspend(struct device *dev) * cannot resume as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ - del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); /* Disable Rx DMA to use UART port as wakeup source */ diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index d69592e5e2ec..28fbc927a546 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -596,7 +596,7 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport) if (!qcom_geni_serial_main_active(uport)) return; - if (port->rx_dma_addr) { + if (port->tx_dma_addr) { geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining); port->tx_dma_addr = 0; @@ -631,9 +631,8 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport) if (port->tx_dma_addr) return; - xmit_size = uart_circ_chars_pending(xmit); - if (xmit_size < WAKEUP_CHARS) - uart_write_wakeup(uport); + if (uart_circ_empty(xmit)) + return; xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); @@ -1070,6 +1069,10 @@ static int setup_fifos(struct qcom_geni_serial_port *port) static void qcom_geni_serial_shutdown(struct uart_port *uport) { disable_irq(uport->irq); + + if (uart_console(uport)) + return; + qcom_geni_serial_stop_tx(uport); qcom_geni_serial_stop_rx(uport); } |