diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 92 |
1 files changed, 40 insertions, 52 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3e55838c0001..100041320e8d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -104,6 +104,27 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) return 0; } +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + if (enable && !dwc->dis_u3_susphy_quirk) + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + else + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (enable && !dwc->dis_u2_susphy_quirk) + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + else + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -585,11 +606,8 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) */ static int dwc3_phy_setup(struct dwc3 *dwc) { - unsigned int hw_mode; u32 reg; - hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); /* @@ -599,21 +617,16 @@ static int dwc3_phy_setup(struct dwc3 *dwc) reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; /* - * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY - * to '0' during coreConsultant configuration. So default value - * will be '0' when the core is reset. Application needs to set it - * to '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - - /* - * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be + * cleared after power-on reset, and it can be set after core + * initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; @@ -639,9 +652,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); - if (dwc->dis_u3_susphy_quirk) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; - if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; @@ -689,24 +699,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* - * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to - * '0' during coreConsultant configuration. So default value will - * be '0' when the core is reset. Application needs to set it to - * '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - - /* - * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared + * after power-on reset, and it can be set after core initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; @@ -1227,21 +1228,6 @@ static int dwc3_core_init(struct dwc3 *dwc) if (ret) goto err_exit_phy; - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && - !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { - if (!dwc->dis_u3_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - } - - if (!dwc->dis_u2_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - } - dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -1519,6 +1505,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) else dwc->sysdev = dwc->dev; + dwc->sys_wakeup = device_may_wakeup(dwc->sysdev); + ret = device_property_read_string(dev, "usb-psy-name", &usb_psy_name); if (ret >= 0) { dwc->usb_psy = power_supply_get_by_name(usb_psy_name); |