1 files changed, 190 insertions, 37 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9c6bf054f15d..0328c86ef806 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -279,9 +279,46 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 	 * XHCI driver will reset the host block. If dwc3 was configured for
 	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
+	/*
+	 * If the dr_mode is host and the dwc->current_dr_role is not the
+	 * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode
+	 * isn't executed yet. Ensure the phy is ready before the controller
+	 * updates the GCTL.PRTCAPDIR or other settings by soft-resetting
+	 * the phy.
+	 *
+	 * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n
+	 * is port index. If this is a multiport host, then we need to reset
+	 * all active ports.
+	 */
+	if (dwc->dr_mode == USB_DR_MODE_HOST) {
+		u32 usb3_port;
+		u32 usb2_port;
+
+		usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+		usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
+		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
+
+		usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
+
+		/* Small delay for phy reset assertion */
+		usleep_range(1000, 2000);
+
+		usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
+		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
+
+		usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
+		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
+
+		/* Wait for clock synchronization */
+		msleep(50);
+		return 0;
+	}
+
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
 	reg &= ~DWC3_DCTL_RUN_STOP;
@@ -817,8 +854,20 @@ static int dwc3_clk_enable(struct dwc3 *dwc)
 	if (ret)
 		goto disable_ref_clk;
 
+	ret = clk_prepare_enable(dwc->utmi_clk);
+	if (ret)
+		goto disable_susp_clk;
+
+	ret = clk_prepare_enable(dwc->pipe_clk);
+	if (ret)
+		goto disable_utmi_clk;
+
 	return 0;
 
+disable_utmi_clk:
+	clk_disable_unprepare(dwc->utmi_clk);
+disable_susp_clk:
+	clk_disable_unprepare(dwc->susp_clk);
 disable_ref_clk:
 	clk_disable_unprepare(dwc->ref_clk);
 disable_bus_clk:
@@ -828,6 +877,8 @@ disable_bus_clk:
 
 static void dwc3_clk_disable(struct dwc3 *dwc)
 {
+	clk_disable_unprepare(dwc->pipe_clk);
+	clk_disable_unprepare(dwc->utmi_clk);
 	clk_disable_unprepare(dwc->susp_clk);
 	clk_disable_unprepare(dwc->ref_clk);
 	clk_disable_unprepare(dwc->bus_clk);
@@ -1057,6 +1108,111 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
 	}
 }
 
+static void dwc3_config_threshold(struct dwc3 *dwc)
+{
+	u32 reg;
+	u8 rx_thr_num;
+	u8 rx_maxburst;
+	u8 tx_thr_num;
+	u8 tx_maxburst;
+
+	/*
+	 * Must config both number of packets and max burst settings to enable
+	 * RX and/or TX threshold.
+	 */
+	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
+		rx_thr_num = dwc->rx_thr_num_pkt_prd;
+		rx_maxburst = dwc->rx_max_burst_prd;
+		tx_thr_num = dwc->tx_thr_num_pkt_prd;
+		tx_maxburst = dwc->tx_max_burst_prd;
+
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
+
+			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
+
+			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
+			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
+
+			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
+			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+
+	rx_thr_num = dwc->rx_thr_num_pkt;
+	rx_maxburst = dwc->rx_max_burst;
+	tx_thr_num = dwc->tx_thr_num_pkt;
+	tx_maxburst = dwc->tx_max_burst;
+
+	if (DWC3_IP_IS(DWC3)) {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	} else {
+		if (rx_thr_num && rx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
+			reg |= DWC31_GRXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0);
+			reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num);
+
+			reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0);
+			reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
+		}
+
+		if (tx_thr_num && tx_maxburst) {
+			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
+			reg |= DWC31_GTXTHRCFG_PKTCNTSEL;
+
+			reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0);
+			reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num);
+
+			reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0);
+			reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
+
+			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
+		}
+	}
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -1209,42 +1365,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	/*
-	 * Must config both number of packets and max burst settings to enable
-	 * RX and/or TX threshold.
-	 */
-	if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) {
-		u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
-		u8 rx_maxburst = dwc->rx_max_burst_prd;
-		u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
-		u8 tx_maxburst = dwc->tx_max_burst_prd;
-
-		if (rx_thr_num && rx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
-			reg |= DWC31_RXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_RXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num);
-
-			reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
-		}
-
-		if (tx_thr_num && tx_maxburst) {
-			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
-			reg |= DWC31_TXTHRNUMPKTSEL_PRD;
-
-			reg &= ~DWC31_TXTHRNUMPKT_PRD(~0);
-			reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num);
-
-			reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0);
-			reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst);
-
-			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
-		}
-	}
+	dwc3_config_threshold(dwc);
 
 	return 0;
 
@@ -1380,6 +1501,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
+	u8			rx_thr_num_pkt = 0;
+	u8			rx_max_burst = 0;
+	u8			tx_thr_num_pkt = 0;
+	u8			tx_max_burst = 0;
 	u8			rx_thr_num_pkt_prd = 0;
 	u8			rx_max_burst_prd = 0;
 	u8			tx_thr_num_pkt_prd = 0;
@@ -1442,6 +1567,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,usb2-lpm-disable");
 	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
 				"snps,usb2-gadget-lpm-disable");
+	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
+				&rx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,rx-max-burst",
+				&rx_max_burst);
+	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
+				&tx_thr_num_pkt);
+	device_property_read_u8(dev, "snps,tx-max-burst",
+				&tx_max_burst);
 	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
 				&rx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,rx-max-burst-prd",
@@ -1523,6 +1656,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 
 	dwc->hird_threshold = hird_threshold;
 
+	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
+	dwc->rx_max_burst = rx_max_burst;
+
+	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
+	dwc->tx_max_burst = tx_max_burst;
+
 	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
 	dwc->rx_max_burst_prd = rx_max_burst_prd;
 
@@ -1748,6 +1887,20 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
 		}
 	}
 
+	/* specific to Rockchip RK3588 */
+	dwc->utmi_clk = devm_clk_get_optional(dev, "utmi");
+	if (IS_ERR(dwc->utmi_clk)) {
+		return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk),
+				"could not get utmi clock\n");
+	}
+
+	/* specific to Rockchip RK3588 */
+	dwc->pipe_clk = devm_clk_get_optional(dev, "pipe");
+	if (IS_ERR(dwc->pipe_clk)) {
+		return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk),
+				"could not get pipe clock\n");
+	}
+
 	return 0;
 }