diff options
Diffstat (limited to 'drivers/usb/dwc3/dwc3-qcom.c')
-rw-r--r-- | drivers/usb/dwc3/dwc3-qcom.c | 144 |
1 files changed, 102 insertions, 42 deletions
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 6cba990da32e..c5e482f53e9d 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -17,10 +17,12 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> +#include <linux/pm_domain.h> #include <linux/usb/of.h> #include <linux/reset.h> #include <linux/iopoll.h> - +#include <linux/usb/hcd.h> +#include <linux/usb.h> #include "core.h" /* USB QSCRATCH Hardware registers */ @@ -76,6 +78,7 @@ struct dwc3_qcom { int dp_hs_phy_irq; int dm_hs_phy_irq; int ss_phy_irq; + enum usb_device_speed usb2_speed; struct extcon_dev *edev; struct extcon_dev *host_edev; @@ -296,50 +299,92 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom) icc_put(qcom->icc_path_apps); } -static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - disable_irq_wake(qcom->hs_phy_irq); - disable_irq_nosync(qcom->hs_phy_irq); - } + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct usb_hcd *hcd = platform_get_drvdata(dwc->xhci); + struct usb_device *udev; - if (qcom->dp_hs_phy_irq) { - disable_irq_wake(qcom->dp_hs_phy_irq); - disable_irq_nosync(qcom->dp_hs_phy_irq); - } + /* + * It is possible to query the speed of all children of + * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code + * currently supports only 1 port per controller. So + * this is sufficient. + */ + udev = usb_hub_find_child(hcd->self.root_hub, 1); - if (qcom->dm_hs_phy_irq) { - disable_irq_wake(qcom->dm_hs_phy_irq); - disable_irq_nosync(qcom->dm_hs_phy_irq); - } + if (!udev) + return USB_SPEED_UNKNOWN; + + return udev->speed; +} + +static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity) +{ + if (!irq) + return; + + if (polarity) + irq_set_irq_type(irq, polarity); + + enable_irq(irq); + enable_irq_wake(irq); +} + +static void dwc3_qcom_disable_wakeup_irq(int irq) +{ + if (!irq) + return; + + disable_irq_wake(irq); + disable_irq_nosync(irq); +} + +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +{ + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->ss_phy_irq) { - disable_irq_wake(qcom->ss_phy_irq); - disable_irq_nosync(qcom->ss_phy_irq); + if (qcom->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || + (qcom->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + } else { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); } + + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { - if (qcom->hs_phy_irq) { - enable_irq(qcom->hs_phy_irq); - enable_irq_wake(qcom->hs_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0); - if (qcom->dp_hs_phy_irq) { - enable_irq(qcom->dp_hs_phy_irq); - enable_irq_wake(qcom->dp_hs_phy_irq); - } + /* + * Configure DP/DM line interrupts based on the USB2 device attached to + * the root hub port. When HS/FS device is connected, configure the DP line + * as falling edge to detect both disconnect and remote wakeup scenarios. When + * LS device is connected, configure DM line as falling edge to detect both + * disconnect and remote wakeup. When no device is connected, configure both + * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario. + */ - if (qcom->dm_hs_phy_irq) { - enable_irq(qcom->dm_hs_phy_irq); - enable_irq_wake(qcom->dm_hs_phy_irq); + if (qcom->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + IRQ_TYPE_EDGE_FALLING); + } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || + (qcom->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + IRQ_TYPE_EDGE_FALLING); + } else { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + IRQ_TYPE_EDGE_RISING); + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + IRQ_TYPE_EDGE_RISING); } - if (qcom->ss_phy_irq) { - enable_irq(qcom->ss_phy_irq); - enable_irq_wake(qcom->ss_phy_irq); - } + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0); } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) @@ -361,8 +406,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) if (ret) dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret); - if (device_may_wakeup(qcom->dev)) + if (device_may_wakeup(qcom->dev)) { + qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom); dwc3_qcom_enable_interrupts(qcom); + } qcom->is_suspended = true; @@ -443,9 +490,9 @@ static int dwc3_qcom_get_irq(struct platform_device *pdev, int ret; if (np) - ret = platform_get_irq_byname(pdev_irq, name); + ret = platform_get_irq_byname_optional(pdev_irq, name); else - ret = platform_get_irq(pdev_irq, num); + ret = platform_get_irq_optional(pdev_irq, num); return ret; } @@ -710,12 +757,13 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev) static int dwc3_qcom_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct dwc3_qcom *qcom; - struct resource *res, *parent_res = NULL; - int ret, i; - bool ignore_pipe_clk; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct dwc3_qcom *qcom; + struct resource *res, *parent_res = NULL; + int ret, i; + bool ignore_pipe_clk; + struct generic_pm_domain *genpd; qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL); if (!qcom) @@ -724,6 +772,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qcom); qcom->dev = &pdev->dev; + genpd = pd_to_genpd(qcom->dev->pm_domain); + if (has_acpi_companion(dev)) { qcom->acpi_pdata = acpi_device_get_match_data(dev); if (!qcom->acpi_pdata) { @@ -831,7 +881,17 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) goto interconnect_exit; - device_init_wakeup(&pdev->dev, 1); + if (device_can_wakeup(&qcom->dwc3->dev)) { + /* + * Setting GENPD_FLAG_ALWAYS_ON flag takes care of keeping + * genpd on in both runtime suspend and system suspend cases. + */ + genpd->flags |= GENPD_FLAG_ALWAYS_ON; + device_init_wakeup(&pdev->dev, true); + } else { + genpd->flags |= GENPD_FLAG_RPM_ALWAYS_ON; + } + qcom->is_suspended = false; pm_runtime_set_active(dev); pm_runtime_enable(dev); |