diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 92 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 3 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 2 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 3 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 12 | ||||
-rw-r--r-- | drivers/usb/dwc3/host.c | 38 |
6 files changed, 95 insertions, 55 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3e55838c0001..100041320e8d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -104,6 +104,27 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) return 0; } +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + if (enable && !dwc->dis_u3_susphy_quirk) + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + else + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (enable && !dwc->dis_u2_susphy_quirk) + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + else + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -585,11 +606,8 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) */ static int dwc3_phy_setup(struct dwc3 *dwc) { - unsigned int hw_mode; u32 reg; - hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); /* @@ -599,21 +617,16 @@ static int dwc3_phy_setup(struct dwc3 *dwc) reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; /* - * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY - * to '0' during coreConsultant configuration. So default value - * will be '0' when the core is reset. Application needs to set it - * to '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - - /* - * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be + * cleared after power-on reset, and it can be set after core + * initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; @@ -639,9 +652,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); - if (dwc->dis_u3_susphy_quirk) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; - if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; @@ -689,24 +699,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* - * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to - * '0' during coreConsultant configuration. So default value will - * be '0' when the core is reset. Application needs to set it to - * '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - - /* - * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared + * after power-on reset, and it can be set after core initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; @@ -1227,21 +1228,6 @@ static int dwc3_core_init(struct dwc3 *dwc) if (ret) goto err_exit_phy; - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && - !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { - if (!dwc->dis_u3_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - } - - if (!dwc->dis_u2_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - } - dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); @@ -1519,6 +1505,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) else dwc->sysdev = dwc->dev; + dwc->sys_wakeup = device_may_wakeup(dwc->sysdev); + ret = device_property_read_string(dev, "usb-psy-name", &usb_psy_name); if (ret >= 0) { dwc->usb_psy = power_supply_get_by_name(usb_psy_name); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index c07edfc954f7..180dd8d29287 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1133,6 +1133,7 @@ struct dwc3_scratchpad_array { * 3 - Reserved * @dis_metastability_quirk: set to disable metastability quirk. * @dis_split_quirk: set to disable split boundary. + * @sys_wakeup: set if the device may do system wakeup. * @wakeup_configured: set if the device is configured for remote wakeup. * @suspended: set to track suspend event due to U3/L2. * @imod_interval: set the interrupt moderation interval in 250ns @@ -1357,6 +1358,7 @@ struct dwc3 { unsigned dis_split_quirk:1; unsigned async_callbacks:1; + unsigned sys_wakeup:1; unsigned wakeup_configured:1; unsigned suspended:1; @@ -1578,6 +1580,7 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc); void dwc3_event_buffers_cleanup(struct dwc3 *dwc); int dwc3_core_soft_reset(struct dwc3 *dwc); +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable); #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 39564e17f3b0..497deed38c0c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -51,7 +51,6 @@ #define PCI_DEVICE_ID_INTEL_MTLP 0x7ec1 #define PCI_DEVICE_ID_INTEL_MTLS 0x7f6f #define PCI_DEVICE_ID_INTEL_MTL 0x7e7e -#define PCI_DEVICE_ID_INTEL_ARLH 0x7ec1 #define PCI_DEVICE_ID_INTEL_ARLH_PCH 0x777e #define PCI_DEVICE_ID_INTEL_TGL 0x9a15 #define PCI_DEVICE_ID_AMD_MR 0x163a @@ -423,7 +422,6 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE_DATA(INTEL, MTLP, &dwc3_pci_intel_swnode) }, { PCI_DEVICE_DATA(INTEL, MTL, &dwc3_pci_intel_swnode) }, { PCI_DEVICE_DATA(INTEL, MTLS, &dwc3_pci_intel_swnode) }, - { PCI_DEVICE_DATA(INTEL, ARLH, &dwc3_pci_intel_swnode) }, { PCI_DEVICE_DATA(INTEL, ARLH_PCH, &dwc3_pci_intel_swnode) }, { PCI_DEVICE_DATA(INTEL, TGL, &dwc3_pci_intel_swnode) }, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 72bb722da2f2..d96ffbe52039 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -226,7 +226,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) /* reinitialize physical ep1 */ dep = dwc->eps[1]; - dep->flags = DWC3_EP_ENABLED; + dep->flags &= DWC3_EP_RESOURCE_ALLOCATED; + dep->flags |= DWC3_EP_ENABLED; /* stall is always issued on EP0 */ dep = dwc->eps[0]; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 40c52dbc28d3..f94f68f1e7d2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2924,6 +2924,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_ep0_out_start(dwc); dwc3_gadget_enable_irq(dwc); + dwc3_enable_susphy(dwc, true); return 0; @@ -2955,6 +2956,9 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc->gadget_driver = driver; spin_unlock_irqrestore(&dwc->lock, flags); + if (dwc->sys_wakeup) + device_wakeup_enable(dwc->sysdev); + return 0; } @@ -2970,6 +2974,9 @@ static int dwc3_gadget_stop(struct usb_gadget *g) struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; + if (dwc->sys_wakeup) + device_wakeup_disable(dwc->sysdev); + spin_lock_irqsave(&dwc->lock, flags); dwc->gadget_driver = NULL; dwc->max_cfg_eps = 0; @@ -4651,6 +4658,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) else dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed); + /* No system wakeup if no gadget driver bound */ + if (dwc->sys_wakeup) + device_wakeup_disable(dwc->sysdev); + return 0; err5: @@ -4680,6 +4691,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc) if (!dwc->gadget) return; + dwc3_enable_susphy(dwc, false); usb_del_gadget(dwc->gadget); dwc3_gadget_free_endpoints(dwc); usb_put_gadget(dwc->gadget); diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 5a5cb6ce9946..a171b27a7845 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -10,10 +10,13 @@ #include <linux/irq.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> #include "../host/xhci-port.h" #include "../host/xhci-ext-caps.h" #include "../host/xhci-caps.h" +#include "../host/xhci-plat.h" #include "core.h" #define XHCI_HCSPARAMS1 0x4 @@ -57,6 +60,24 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) } } +static void dwc3_xhci_plat_start(struct usb_hcd *hcd) +{ + struct platform_device *pdev; + struct dwc3 *dwc; + + if (!usb_hcd_is_primary_hcd(hcd)) + return; + + pdev = to_platform_device(hcd->self.controller); + dwc = dev_get_drvdata(pdev->dev.parent); + + dwc3_enable_susphy(dwc, true); +} + +static const struct xhci_plat_priv dwc3_xhci_plat_quirk = { + .plat_start = dwc3_xhci_plat_start, +}; + static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc, int irq, char *name) { @@ -167,12 +188,25 @@ int dwc3_host_init(struct dwc3 *dwc) } } + ret = platform_device_add_data(xhci, &dwc3_xhci_plat_quirk, + sizeof(struct xhci_plat_priv)); + if (ret) + goto err; + ret = platform_device_add(xhci); if (ret) { dev_err(dwc->dev, "failed to register xHCI device\n"); goto err; } + if (dwc->sys_wakeup) { + /* Restore wakeup setting if switched from device */ + device_wakeup_enable(dwc->sysdev); + + /* Pass on wakeup setting to the new xhci platform device */ + device_init_wakeup(&xhci->dev, true); + } + return 0; err: platform_device_put(xhci); @@ -181,6 +215,10 @@ err: void dwc3_host_exit(struct dwc3 *dwc) { + if (dwc->sys_wakeup) + device_init_wakeup(&dwc->xhci->dev, false); + + dwc3_enable_susphy(dwc, false); platform_device_unregister(dwc->xhci); dwc->xhci = NULL; } |