summaryrefslogtreecommitdiff
path: root/drivers/usb/host/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/Kconfig')
-rw-r--r--drivers/usb/host/Kconfig63
1 files changed, 30 insertions, 33 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4263d011392c..5be0326aae38 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -29,15 +29,6 @@ if USB_XHCI_HCD
config USB_XHCI_PLATFORM
tristate
-config USB_XHCI_HCD_DEBUGGING
- bool "Debugging for the xHCI host controller"
- ---help---
- Say 'Y' to turn on debugging for the xHCI host controller driver.
- This will spew debugging output, even in interrupt context.
- This should only be used for debugging xHCI driver bugs.
-
- If unsure, say N.
-
endif # USB_XHCI_HCD
config USB_EHCI_HCD
@@ -113,12 +104,6 @@ config USB_EHCI_HCD_PMC_MSP
Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
If unsure, say N.
-config USB_EHCI_BIG_ENDIAN_MMIO
- bool
-
-config USB_EHCI_BIG_ENDIAN_DESC
- bool
-
config XPS_USB_HCD_XILINX
bool "Use Xilinx usb host EHCI controller core"
depends on (PPC32 || MICROBLAZE)
@@ -148,13 +133,11 @@ config USB_EHCI_MXC
config USB_EHCI_HCD_OMAP
tristate "EHCI support for OMAP3 and later chips"
depends on ARCH_OMAP
+ select NOP_USB_XCEIV
default y
---help---
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
- If your system uses a PHY on the USB port, you will need to
- enable USB_PHY and the appropriate PHY driver as well. Most
- boards need the NOP_USB_XCEIV PHY driver.
config USB_EHCI_HCD_ORION
tristate "Support for Marvell EBU on-chip EHCI USB controller"
@@ -186,7 +169,6 @@ config USB_EHCI_HCD_AT91
config USB_EHCI_MSM
tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
depends on ARCH_MSM
- depends on USB_PHY
select USB_EHCI_ROOT_HUB_TT
select USB_MSM_OTG
---help---
@@ -354,6 +336,18 @@ config USB_FUSBH200_HCD
To compile this driver as a module, choose M here: the
module will be called fusbh200-hcd.
+config USB_FOTG210_HCD
+ tristate "FOTG210 HCD support"
+ depends on USB
+ default N
+ ---help---
+ Faraday FOTG210 is an OTG controller which can be configured as
+ an USB2.0 host. It is designed to meet USB2.0 EHCI specification
+ with minor modification.
+
+ To compile this driver as a module, choose M here: the
+ module will be called fotg210-hcd.
+
config USB_OHCI_HCD
tristate "OHCI HCD (USB 1.1) support"
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
@@ -497,20 +491,6 @@ config USB_OCTEON_OHCI
controller. It is needed for low-speed USB 1.0 device
support. All CN6XXX based chips with USB are supported.
-
-config USB_OHCI_BIG_ENDIAN_DESC
- bool
- default n
-
-config USB_OHCI_BIG_ENDIAN_MMIO
- bool
- default n
-
-config USB_OHCI_LITTLE_ENDIAN
- bool
- default n if STB03xxx || PPC_MPC52xx
- default y
-
endif # USB_OHCI_HCD
config USB_UHCI_HCD
@@ -710,3 +690,20 @@ config USB_HCD_SSB
for ehci and ohci.
If unsure, say N.
+
+config USB_HCD_TEST_MODE
+ bool "HCD test mode support"
+ ---help---
+ Say 'Y' to enable additional software test modes that may be
+ supported by the host controller drivers.
+
+ One such test mode is the Embedded High-speed Host Electrical Test
+ (EHSET) for EHCI host controller hardware, specifically the "Single
+ Step Set Feature" test. Typically this will be enabled for On-the-Go
+ or embedded hosts that need to undergo USB-IF compliance testing with
+ the aid of special testing hardware. In the future, this may expand
+ to include other tests that require support from a HCD driver.
+
+ This option is of interest only to developers who need to validate
+ their USB hardware designs. It is not needed for normal use. If
+ unsure, say N.