summaryrefslogtreecommitdiff
path: root/drivers/usb/host/fotg210.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/fotg210.h')
-rw-r--r--drivers/usb/host/fotg210.h750
1 files changed, 750 insertions, 0 deletions
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
new file mode 100644
index 000000000000..8920f9d32564
--- /dev/null
+++ b/drivers/usb/host/fotg210.h
@@ -0,0 +1,750 @@
+#ifndef __LINUX_FOTG210_H
+#define __LINUX_FOTG210_H
+
+/* definitions used for the EHCI driver */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
+ * the host controller implementation.
+ *
+ * To facilitate the strongest possible byte-order checking from "sparse"
+ * and so on, we use __leXX unless that's not practical.
+ */
+#define __hc32 __le32
+#define __hc16 __le16
+
+/* statistics can be kept for tuning/monitoring */
+struct fotg210_stats {
+ /* irq usage */
+ unsigned long normal;
+ unsigned long error;
+ unsigned long iaa;
+ unsigned long lost_iaa;
+
+ /* termination of urbs from core */
+ unsigned long complete;
+ unsigned long unlink;
+};
+
+/* fotg210_hcd->lock guards shared data against other CPUs:
+ * fotg210_hcd: async, unlink, periodic (and shadow), ...
+ * usb_host_endpoint: hcpriv
+ * fotg210_qh: qh_next, qtd_list
+ * fotg210_qtd: qtd_list
+ *
+ * Also, hold this lock when talking to HC registers or
+ * when updating hw_* fields in shared qh/qtd/... structures.
+ */
+
+#define FOTG210_MAX_ROOT_PORTS 1 /* see HCS_N_PORTS */
+
+/*
+ * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
+ * controller may be doing DMA. Lower values mean there's no DMA.
+ */
+enum fotg210_rh_state {
+ FOTG210_RH_HALTED,
+ FOTG210_RH_SUSPENDED,
+ FOTG210_RH_RUNNING,
+ FOTG210_RH_STOPPING
+};
+
+/*
+ * Timer events, ordered by increasing delay length.
+ * Always update event_delays_ns[] and event_handlers[] (defined in
+ * ehci-timer.c) in parallel with this list.
+ */
+enum fotg210_hrtimer_event {
+ FOTG210_HRTIMER_POLL_ASS, /* Poll for async schedule off */
+ FOTG210_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
+ FOTG210_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
+ FOTG210_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
+ FOTG210_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
+ FOTG210_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
+ FOTG210_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
+ FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
+ FOTG210_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
+ FOTG210_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
+ FOTG210_HRTIMER_NUM_EVENTS /* Must come last */
+};
+#define FOTG210_HRTIMER_NO_EVENT 99
+
+struct fotg210_hcd { /* one per controller */
+ /* timing support */
+ enum fotg210_hrtimer_event next_hrtimer_event;
+ unsigned enabled_hrtimer_events;
+ ktime_t hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
+ struct hrtimer hrtimer;
+
+ int PSS_poll_count;
+ int ASS_poll_count;
+ int died_poll_count;
+
+ /* glue to PCI and HCD framework */
+ struct fotg210_caps __iomem *caps;
+ struct fotg210_regs __iomem *regs;
+ struct fotg210_dbg_port __iomem *debug;
+
+ __u32 hcs_params; /* cached register copy */
+ spinlock_t lock;
+ enum fotg210_rh_state rh_state;
+
+ /* general schedule support */
+ bool scanning:1;
+ bool need_rescan:1;
+ bool intr_unlinking:1;
+ bool async_unlinking:1;
+ bool shutdown:1;
+ struct fotg210_qh *qh_scan_next;
+
+ /* async schedule support */
+ struct fotg210_qh *async;
+ struct fotg210_qh *dummy; /* For AMD quirk use */
+ struct fotg210_qh *async_unlink;
+ struct fotg210_qh *async_unlink_last;
+ struct fotg210_qh *async_iaa;
+ unsigned async_unlink_cycle;
+ unsigned async_count; /* async activity count */
+
+ /* periodic schedule support */
+#define DEFAULT_I_TDPS 1024 /* some HCs can do less */
+ unsigned periodic_size;
+ __hc32 *periodic; /* hw periodic table */
+ dma_addr_t periodic_dma;
+ struct list_head intr_qh_list;
+ unsigned i_thresh; /* uframes HC might cache */
+
+ union fotg210_shadow *pshadow; /* mirror hw periodic table */
+ struct fotg210_qh *intr_unlink;
+ struct fotg210_qh *intr_unlink_last;
+ unsigned intr_unlink_cycle;
+ unsigned now_frame; /* frame from HC hardware */
+ unsigned next_frame; /* scan periodic, start here */
+ unsigned intr_count; /* intr activity count */
+ unsigned isoc_count; /* isoc activity count */
+ unsigned periodic_count; /* periodic activity count */
+ /* max periodic time per uframe */
+ unsigned uframe_periodic_max;
+
+
+ /* list of itds completed while now_frame was still active */
+ struct list_head cached_itd_list;
+ struct fotg210_itd *last_itd_to_free;
+
+ /* per root hub port */
+ unsigned long reset_done[FOTG210_MAX_ROOT_PORTS];
+
+ /* bit vectors (one bit per port) */
+ unsigned long bus_suspended; /* which ports were
+ already suspended at the start of a bus suspend */
+ unsigned long companion_ports; /* which ports are
+ dedicated to the companion controller */
+ unsigned long owned_ports; /* which ports are
+ owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
+ unsigned long suspended_ports; /* which ports are
+ suspended */
+ unsigned long resuming_ports; /* which ports have
+ started to resume */
+
+ /* per-HC memory pools (could be per-bus, but ...) */
+ struct dma_pool *qh_pool; /* qh per active urb */
+ struct dma_pool *qtd_pool; /* one or more per qh */
+ struct dma_pool *itd_pool; /* itd per iso urb */
+
+ unsigned random_frame;
+ unsigned long next_statechange;
+ ktime_t last_periodic_enable;
+ u32 command;
+
+ /* SILICON QUIRKS */
+ unsigned need_io_watchdog:1;
+ unsigned fs_i_thresh:1; /* Intel iso scheduling */
+
+ u8 sbrn; /* packed release number */
+
+ /* irq statistics */
+#ifdef FOTG210_STATS
+ struct fotg210_stats stats;
+# define COUNT(x) ((x)++)
+#else
+# define COUNT(x)
+#endif
+
+ /* debug files */
+#ifdef DEBUG
+ struct dentry *debug_dir;
+#endif
+};
+
+/* convert between an HCD pointer and the corresponding FOTG210_HCD */
+static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
+{
+ return (struct fotg210_hcd *)(hcd->hcd_priv);
+}
+static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
+{
+ return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct fotg210_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ * some hosts treat caplength and hciversion as parts of a 32-bit
+ * register, others treat them as two separate registers, this
+ * affects the memory map for big endian controllers.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(fotg210, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
+ (fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
+#define HC_VERSION(fotg210, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
+ (fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+ u8 portroute[8]; /* nibbles for routing - offset 0xC */
+};
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct fotg210_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+
+/* EHCI 1.1 addendum */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved1;
+ /* PORTSC: offset 0x20 */
+ u32 port_status;
+/* 31:23 reserved */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC)
+ u32 reserved2[19];
+
+ /* OTGCSR: offet 0x70 */
+ u32 otgcsr;
+#define OTGCSR_HOST_SPD_TYP (3 << 22)
+#define OTGCSR_A_BUS_DROP (1 << 5)
+#define OTGCSR_A_BUS_REQ (1 << 4)
+
+ /* OTGISR: offset 0x74 */
+ u32 otgisr;
+#define OTGISR_OVC (1 << 10)
+
+ u32 reserved3[15];
+
+ /* GMIR: offset 0xB4 */
+ u32 gmir;
+#define GMIR_INT_POLARITY (1 << 3) /*Active High*/
+#define GMIR_MHC_INT (1 << 2)
+#define GMIR_MOTG_INT (1 << 1)
+#define GMIR_MDEV_INT (1 << 0)
+};
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct fotg210_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+struct usb_hcd;
+
+static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return 1; /* Shouldn't this be 0? */
+}
+
+static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return -1;
+}
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from fotg210 host driver to fotg210 debug driver */
+extern int dbgp_external_startup(struct usb_hcd *);
+extern int dbgp_reset_prep(struct usb_hcd *hcd);
+#else
+static inline int dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return xen_dbgp_reset_prep(hcd);
+}
+static inline int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd);
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define QTD_NEXT(fotg210, dma) cpu_to_hc32(fotg210, (u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct fotg210_qtd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.5.1 */
+ __hc32 hw_alt_next; /* see EHCI 3.5.2 */
+ __hc32 hw_token; /* see EHCI 3.5.3 */
+#define QTD_TOGGLE (1 << 31) /* data toggle */
+#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
+#define QTD_IOC (1 << 15) /* interrupt on complete */
+#define QTD_CERR(tok) (((tok)>>10) & 0x3)
+#define QTD_PID(tok) (((tok)>>8) & 0x3)
+#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
+#define QTD_STS_HALT (1 << 6) /* halted on error */
+#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
+#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
+#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
+#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
+#define QTD_STS_STS (1 << 1) /* split transaction state */
+#define QTD_STS_PING (1 << 0) /* issue PING? */
+
+#define ACTIVE_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
+#define HALT_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_HALT)
+#define STATUS_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_STS)
+
+ __hc32 hw_buf[5]; /* see EHCI 3.5.4 */
+ __hc32 hw_buf_hi[5]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t qtd_dma; /* qtd address */
+ struct list_head qtd_list; /* sw qtd list */
+ struct urb *urb; /* qtd's urb */
+ size_t length; /* length of buffer */
+} __aligned(32);
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK(fotg210) cpu_to_hc32(fotg210, ~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
+
+/*-------------------------------------------------------------------------*/
+
+/* type tag from {qh,itd,fstn}->hw_next */
+#define Q_NEXT_TYPE(fotg210, dma) ((dma) & cpu_to_hc32(fotg210, 3 << 1))
+
+/*
+ * Now the following defines are not converted using the
+ * cpu_to_le32() macro anymore, since we have to support
+ * "dynamic" switching between be and le support, so that the driver
+ * can be used on one system with SoC EHCI controller using big-endian
+ * descriptors as well as a normal little-endian PCI EHCI controller.
+ */
+/* values for that type tag */
+#define Q_TYPE_ITD (0 << 1)
+#define Q_TYPE_QH (1 << 1)
+#define Q_TYPE_SITD (2 << 1)
+#define Q_TYPE_FSTN (3 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(fotg210, dma) \
+ (cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define FOTG210_LIST_END(fotg210) \
+ cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure. That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule. Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union fotg210_shadow {
+ struct fotg210_qh *qh; /* Q_TYPE_QH */
+ struct fotg210_itd *itd; /* Q_TYPE_ITD */
+ struct fotg210_fstn *fstn; /* Q_TYPE_FSTN */
+ __hc32 *hw_next; /* (all types) */
+ void *ptr;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+/* first part defined by EHCI spec */
+struct fotg210_qh_hw {
+ __hc32 hw_next; /* see EHCI 3.6.1 */
+ __hc32 hw_info1; /* see EHCI 3.6.2 */
+#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
+#define QH_HEAD (1 << 15) /* Head of async reclamation list */
+#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
+#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
+#define QH_LOW_SPEED (1 << 12)
+#define QH_FULL_SPEED (0 << 12)
+#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
+ __hc32 hw_info2; /* see EHCI 3.6.2 */
+#define QH_SMASK 0x000000ff
+#define QH_CMASK 0x0000ff00
+#define QH_HUBADDR 0x007f0000
+#define QH_HUBPORT 0x3f800000
+#define QH_MULT 0xc0000000
+ __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
+
+ /* qtd overlay (hardware parts of a struct fotg210_qtd) */
+ __hc32 hw_qtd_next;
+ __hc32 hw_alt_next;
+ __hc32 hw_token;
+ __hc32 hw_buf[5];
+ __hc32 hw_buf_hi[5];
+} __aligned(32);
+
+struct fotg210_qh {
+ struct fotg210_qh_hw *hw; /* Must come first */
+ /* the rest is HCD-private */
+ dma_addr_t qh_dma; /* address of qh */
+ union fotg210_shadow qh_next; /* ptr to qh; or periodic */
+ struct list_head qtd_list; /* sw qtd list */
+ struct list_head intr_node; /* list of intr QHs */
+ struct fotg210_qtd *dummy;
+ struct fotg210_qh *unlink_next; /* next on unlink list */
+
+ unsigned unlink_cycle;
+
+ u8 needs_rescan; /* Dequeue during giveback */
+ u8 qh_state;
+#define QH_STATE_LINKED 1 /* HC sees this */
+#define QH_STATE_UNLINK 2 /* HC may still see this */
+#define QH_STATE_IDLE 3 /* HC doesn't see this */
+#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
+#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
+
+ u8 xacterrs; /* XactErr retry counter */
+#define QH_XACTERR_MAX 32 /* XactErr retry limit */
+
+ /* periodic schedule info */
+ u8 usecs; /* intr bandwidth */
+ u8 gap_uf; /* uframes split/csplit gap */
+ u8 c_usecs; /* ... split completion bw */
+ u16 tt_usecs; /* tt downstream bandwidth */
+ unsigned short period; /* polling interval */
+ unsigned short start; /* where polling starts */
+#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
+ struct usb_device *dev; /* access to TT */
+ unsigned is_out:1; /* bulk or intr OUT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* description of one iso transaction (up to 3 KB data if highspeed) */
+struct fotg210_iso_packet {
+ /* These will be copied to iTD when scheduling */
+ u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
+ __hc32 transaction; /* itd->hw_transaction[i] |= */
+ u8 cross; /* buf crosses pages */
+ /* for full speed OUT splits */
+ u32 buf1;
+};
+
+/* temporary schedule data for packets from iso urbs (both speeds)
+ * each packet is one logical usb transaction to the device (not TT),
+ * beginning at stream->next_uframe
+ */
+struct fotg210_iso_sched {
+ struct list_head td_list;
+ unsigned span;
+ struct fotg210_iso_packet packet[0];
+};
+
+/*
+ * fotg210_iso_stream - groups all (s)itds for this endpoint.
+ * acts like a qh would, if EHCI had them for ISO.
+ */
+struct fotg210_iso_stream {
+ /* first field matches fotg210_hq, but is NULL */
+ struct fotg210_qh_hw *hw;
+
+ u8 bEndpointAddress;
+ u8 highspeed;
+ struct list_head td_list; /* queued itds */
+ struct list_head free_list; /* list of unused itds */
+ struct usb_device *udev;
+ struct usb_host_endpoint *ep;
+
+ /* output of (re)scheduling */
+ int next_uframe;
+ __hc32 splits;
+
+ /* the rest is derived from the endpoint descriptor,
+ * trusting urb->interval == f(epdesc->bInterval) and
+ * including the extra info for hw_bufp[0..2]
+ */
+ u8 usecs, c_usecs;
+ u16 interval;
+ u16 tt_usecs;
+ u16 maxp;
+ u16 raw_mask;
+ unsigned bandwidth;
+
+ /* This is used to initialize iTD's hw_bufp fields */
+ __hc32 buf0;
+ __hc32 buf1;
+ __hc32 buf2;
+
+ /* this is used to initialize sITD's tt info */
+ __hc32 address;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.95 Section 3.3
+ * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
+ *
+ * Schedule records for high speed iso xfers
+ */
+struct fotg210_itd {
+ /* first part defined by EHCI spec */
+ __hc32 hw_next; /* see EHCI 3.3.1 */
+ __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */
+#define FOTG210_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
+#define FOTG210_ISOC_BUF_ERR (1<<30) /* Data buffer error */
+#define FOTG210_ISOC_BABBLE (1<<29) /* babble detected */
+#define FOTG210_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
+#define FOTG210_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
+#define FOTG210_ITD_IOC (1 << 15) /* interrupt on complete */
+
+#define ITD_ACTIVE(fotg210) cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
+
+ __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */
+ __hc32 hw_bufp_hi[7]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t itd_dma; /* for this itd */
+ union fotg210_shadow itd_next; /* ptr to periodic q entry */
+
+ struct urb *urb;
+ struct fotg210_iso_stream *stream; /* endpoint's queue */
+ struct list_head itd_list; /* list of stream's itds */
+
+ /* any/all hw_transactions here may be used by that urb */
+ unsigned frame; /* where scheduled */
+ unsigned pg;
+ unsigned index[8]; /* in urb->iso_frame_desc */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI Specification 0.96 Section 3.7
+ * Periodic Frame Span Traversal Node (FSTN)
+ *
+ * Manages split interrupt transactions (using TT) that span frame boundaries
+ * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
+ * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
+ * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
+ */
+struct fotg210_fstn {
+ __hc32 hw_next; /* any periodic q entry */
+ __hc32 hw_prev; /* qh or FOTG210_LIST_END */
+
+ /* the rest is HCD-private */
+ dma_addr_t fstn_dma;
+ union fotg210_shadow fstn_next; /* ptr to periodic q entry */
+} __aligned(32);
+
+/*-------------------------------------------------------------------------*/
+
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
+ fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup);
+
+#define fotg210_prepare_ports_for_controller_resume(fotg210) \
+ fotg210_adjust_port_wakeup_flags(fotg210, false, false);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Some EHCI controllers have a Transaction Translator built into the
+ * root hub. This is a non-standard feature. Each controller will need
+ * to add code to the following inline functions, and call them as
+ * needed (mostly in root hub code).
+ */
+
+static inline unsigned int
+fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
+{
+ return (readl(&fotg210->regs->otgcsr)
+ & OTGCSR_HOST_SPD_TYP) >> 22;
+}
+
+/* Returns the speed of a device attached to a port on the root hub. */
+static inline unsigned int
+fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
+{
+ switch (fotg210_get_speed(fotg210, portsc)) {
+ case 0:
+ return 0;
+ case 1:
+ return USB_PORT_STAT_LOW_SPEED;
+ case 2:
+ default:
+ return USB_PORT_STAT_HIGH_SPEED;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define fotg210_has_fsl_portno_bug(e) (0)
+
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ */
+
+#define fotg210_big_endian_mmio(e) 0
+#define fotg210_big_endian_capbase(e) 0
+
+static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
+ __u32 __iomem *regs)
+{
+ return readl(regs);
+}
+
+static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
+ const unsigned int val, __u32 __iomem *regs)
+{
+ writel(val, regs);
+}
+
+/* cpu to fotg210 */
+static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
+{
+ return cpu_to_le32(x);
+}
+
+/* fotg210 to cpu */
+static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
+{
+ return le32_to_cpu(x);
+}
+
+static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
+ const __hc32 *x)
+{
+ return le32_to_cpup(x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
+{
+ return fotg210_readl(fotg210, &fotg210->regs->frame_index);
+}
+
+#define fotg210_itdlen(urb, desc, t) ({ \
+ usb_pipein((urb)->pipe) ? \
+ (desc)->length - FOTG210_ITD_LENGTH(t) : \
+ FOTG210_ITD_LENGTH(t); \
+})
+/*-------------------------------------------------------------------------*/
+
+#ifndef DEBUG
+#define STUB_DEBUG_FILES
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*/
+
+#endif /* __LINUX_FOTG210_H */