diff options
Diffstat (limited to 'drivers/watchdog/Kconfig')
| -rw-r--r-- | drivers/watchdog/Kconfig | 69 |
1 files changed, 41 insertions, 28 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6bee137cfbe0..85eea38dbdf4 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -254,6 +254,17 @@ config GPIO_WATCHDOG_ARCH_INITCALL arch_initcall. If in doubt, say N. +config LENOVO_SE10_WDT + tristate "Lenovo SE10 Watchdog" + depends on (X86 && DMI) || COMPILE_TEST + select WATCHDOG_CORE + help + If you say yes here you get support for the watchdog + functionality for the Lenovo SE10 platform. + + This driver can also be built as a module. If so, the module + will be called lenovo-se10-wdt. + config MENF21BMC_WATCHDOG tristate "MEN 14F021P00 BMC Watchdog" depends on MFD_MENF21BMC || COMPILE_TEST @@ -482,6 +493,7 @@ config 21285_WATCHDOG config 977_WATCHDOG tristate "NetWinder WB83C977 watchdog" depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST) + depends on HAS_IOPORT help Say Y here to include support for the WB977 watchdog included in NetWinder machines. Alternatively say M to compile the driver as @@ -1075,7 +1087,7 @@ config ACQUIRE_WDT config ADVANTECH_WDT tristate "Advantech SBC Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help If you are configuring a Linux kernel for the Advantech single-board computer, say `Y' here to support its built-in watchdog timer @@ -1084,7 +1096,7 @@ config ADVANTECH_WDT config ADVANTECH_EC_WDT tristate "Advantech Embedded Controller Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select ISA_BUS_API select WATCHDOG_CORE help @@ -1117,7 +1129,7 @@ config ALIM7101_WDT config EBC_C384_WDT tristate "WinSystems EBC-C384 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select ISA_BUS_API select WATCHDOG_CORE help @@ -1127,7 +1139,7 @@ config EBC_C384_WDT config EXAR_WDT tristate "Exar Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help Enables watchdog timer support for the watchdog timer present @@ -1138,7 +1150,7 @@ config EXAR_WDT config F71808E_WDT tristate "Fintek F718xx, F818xx Super I/O Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the Fintek F71808E, @@ -1150,7 +1162,7 @@ config F71808E_WDT config SP5100_TCO tristate "AMD/ATI SP5100 TCO Timer/Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT select WATCHDOG_CORE help Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO @@ -1189,7 +1201,7 @@ config SC520_WDT config SBC_FITPC2_WATCHDOG tristate "Compulab SBC-FITPC2 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the fit-PC2, fit-PC2i, CM-iAM single-board computers made by Compulab. @@ -1214,7 +1226,7 @@ config SBC_FITPC2_WATCHDOG config EUROTECH_WDT tristate "Eurotech CPU-1220/1410 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help Enable support for the watchdog timer on the Eurotech CPU-1220 and CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product @@ -1222,7 +1234,7 @@ config EUROTECH_WDT config IB700_WDT tristate "IB700 SBC Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the IB700 Single Board Computer produced by TMC Technology (www.tmc-uk.com). This @@ -1239,7 +1251,7 @@ config IB700_WDT config IBMASR tristate "IBM Automatic Server Restart" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the IBM Automatic Server Restart watchdog timer built-in into some eServer xSeries machines. @@ -1249,7 +1261,7 @@ config IBMASR config WAFER_WDT tristate "ICP Single Board Computer Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is a driver for the hardware watchdog on the ICP Single Board Computer. This driver is working on (at least) the following @@ -1271,7 +1283,7 @@ config I6300ESB_WDT config IE6XX_WDT tristate "Intel Atom E6xx Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT select WATCHDOG_CORE select MFD_CORE select LPC_SCH @@ -1301,6 +1313,7 @@ config ITCO_WDT select WATCHDOG_CORE depends on I2C || I2C=n depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT + depends on HAS_IOPORT # for I2C_I801 select LPC_ICH if !EXPERT select I2C_I801 if !EXPERT && I2C help @@ -1331,7 +1344,7 @@ config ITCO_VENDOR_SUPPORT config IT8712F_WDT tristate "IT8712F (Smart Guardian) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the IT8712F Super I/0 chipset used on many motherboards. @@ -1344,7 +1357,7 @@ config IT8712F_WDT config IT87_WDT tristate "IT87 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the ITE IT8607, @@ -1392,7 +1405,7 @@ config KEMPLD_WDT config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is a driver for National Semiconductor PC87307/PC97307 hardware watchdog cards as found on the SC1200. This watchdog is mainly used @@ -1415,7 +1428,7 @@ config SCx200_WDT config PC87413_WDT tristate "NS PC87413 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the PC87413 chipset This watchdog simply watches your kernel to make sure it doesn't @@ -1429,7 +1442,7 @@ config PC87413_WDT config NV_TCO tristate "nVidia TCO Timer/Watchdog" - depends on (X86 || COMPILE_TEST) && PCI + depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT help Hardware driver for the TCO timer built into the nVidia Hub family (such as the MCP51). The TCO (Total Cost of Ownership) timer is a @@ -1458,7 +1471,7 @@ config RDC321X_WDT config 60XX_WDT tristate "SBC-60XX Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This driver can be used with the watchdog timer found on some single board computers, namely the 6010 PII based computer. @@ -1498,7 +1511,7 @@ config SBC7240_WDT config CPU5_WDT tristate "SMA CPU5 Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help TBD. To compile this driver as a module, choose M here: the @@ -1506,7 +1519,7 @@ config CPU5_WDT config SMSC_SCH311X_WDT tristate "SMSC SCH311X Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset @@ -1518,7 +1531,7 @@ config SMSC_SCH311X_WDT config SMSC37B787_WDT tristate "Winbond SMsC37B787 Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog component on the Winbond SMsC37B787 chipset as used on the NetRunner Mainboard @@ -1564,7 +1577,7 @@ config VIA_WDT config W83627HF_WDT tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT select WATCHDOG_CORE help This is the driver for the hardware watchdog on the following @@ -1594,7 +1607,7 @@ config W83627HF_WDT config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the W83877F chipset as used in EMACS PC-104 motherboards (and likely others). This @@ -1609,7 +1622,7 @@ config W83877F_WDT config W83977F_WDT tristate "W83977F (PCM-5335) Watchdog Timer" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the hardware watchdog on the W83977F I/O chip as used in AAEON's PCM-5335 SBC (and likely others). This @@ -1622,7 +1635,7 @@ config W83977F_WDT config MACHZ_WDT tristate "ZF MachZ Watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help If you are using a ZF Micro MachZ processor, say Y here, otherwise N. This is the driver for the watchdog timer built-in on that @@ -1635,7 +1648,7 @@ config MACHZ_WDT config SBC_EPX_C3_WATCHDOG tristate "Winsystems SBC EPX-C3 watchdog" - depends on X86 || COMPILE_TEST + depends on (X86 || COMPILE_TEST) && HAS_IOPORT help This is the driver for the built-in watchdog timer on the EPX-C3 Single-board computer made by Winsystems, Inc. @@ -2197,7 +2210,7 @@ comment "PCI-based Watchdog Cards" config PCIPCWATCHDOG tristate "Berkshire Products PCI-PC Watchdog" - depends on PCI + depends on PCI && HAS_IOPORT help This is the driver for the Berkshire Products PCI-PC Watchdog card. This card simply watches your kernel to make sure it doesn't freeze, @@ -2212,7 +2225,7 @@ config PCIPCWATCHDOG config WDTPCI tristate "PCI-WDT500/501 Watchdog timer" - depends on PCI + depends on PCI && HAS_IOPORT help If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. |