diff options
Diffstat (limited to 'drivers')
37 files changed, 638 insertions, 413 deletions
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 151d95f96b11..69d2138d7efb 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -16,6 +16,9 @@ menuconfig AUXDISPLAY if AUXDISPLAY +# +# Character LCD section +# config CHARLCD tristate "Character LCD core support" if COMPILE_TEST help @@ -25,12 +28,6 @@ config CHARLCD This is some character LCD core interface that multiple drivers can use. -config LINEDISP - tristate "Character line display core support" if COMPILE_TEST - help - This is the core support for single-line character displays, to be - selected by drivers that use it. - config HD44780_COMMON tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST select CHARLCD @@ -52,145 +49,6 @@ config HD44780 kernel and started at boot. If you don't understand what all this is about, say N. -config KS0108 - tristate "KS0108 LCD Controller" - depends on PARPORT_PC - default n - help - If you have a LCD controlled by one or more KS0108 - controllers, say Y. You will need also another more specific - driver for your LCD. - - Depends on Parallel Port support. If you say Y at - parport, you will be able to compile this as a module (M) - and built-in as well (Y). - - To compile this as a module, choose M here: - the module will be called ks0108. - - If unsure, say N. - -config KS0108_PORT - hex "Parallel port where the LCD is connected" - depends on KS0108 - default 0x378 - help - The address of the parallel port where the LCD is connected. - - The first standard parallel port address is 0x378. - The second standard parallel port address is 0x278. - The third standard parallel port address is 0x3BC. - - You can specify a different address if you need. - - If you don't know what I'm talking about, load the parport module, - and execute "dmesg" or "cat /proc/ioports". You can see there how - many parallel ports are present and which address each one has. - - Usually you only need to use 0x378. - - If you compile this as a module, you can still override this - using the module parameters. - -config KS0108_DELAY - int "Delay between each control writing (microseconds)" - depends on KS0108 - default "2" - help - Amount of time the ks0108 should wait between each control write - to the parallel port. - - If your LCD seems to miss random writings, increment this. - - If you don't know what I'm talking about, ignore it. - - If you compile this as a module, you can still override this - value using the module parameters. - -config CFAG12864B - tristate "CFAG12864B LCD" - depends on X86 - depends on FB - depends on KS0108 - select FB_SYSMEM_HELPERS - default n - help - If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, - say Y. You also need the ks0108 LCD Controller driver. - - For help about how to wire your LCD to the parallel port, - check Documentation/admin-guide/auxdisplay/cfag12864b.rst - - Depends on the x86 arch and the framebuffer support. - - The LCD framebuffer driver can be attached to a console. - It will work fine. However, you can't attach it to the fbdev driver - of the xorg server. - - To compile this as a module, choose M here: - the modules will be called cfag12864b and cfag12864bfb. - - If unsure, say N. - -config CFAG12864B_RATE - int "Refresh rate (hertz)" - depends on CFAG12864B - default "20" - help - Refresh rate of the LCD. - - As the LCD is not memory mapped, the driver has to make the work by - software. This means you should be careful setting this value higher. - If your CPUs are really slow or you feel the system is slowed down, - decrease the value. - - Be careful modifying this value to a very high value: - You can freeze the computer, or the LCD maybe can't draw as fast as you - are requesting. - - If you don't know what I'm talking about, ignore it. - - If you compile this as a module, you can still override this - value using the module parameters. - -config IMG_ASCII_LCD - tristate "Imagination Technologies ASCII LCD Display" - depends on HAS_IOMEM - default y if MIPS_MALTA - select MFD_SYSCON - select LINEDISP - help - Enable this to support the simple ASCII LCD displays found on - development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 - from Imagination Technologies. - -config HT16K33 - tristate "Holtek Ht16K33 LED controller with keyscan" - depends on FB && I2C && INPUT - select FB_SYSMEM_HELPERS - select INPUT_MATRIXKMAP - select FB_BACKLIGHT - select NEW_LEDS - select LEDS_CLASS - select LINEDISP - help - Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 - LED controller driver with keyscan. - -config MAX6959 - tristate "Maxim MAX6958/6959 7-segment LED controller" - depends on I2C - select REGMAP_I2C - select LINEDISP - help - If you say yes here you get support for the following Maxim chips - (I2C 7-segment LED display controller): - - MAX6958 - - MAX6959 (input support) - - This driver can also be built as a module. If so, the module - will be called max6959. - config LCD2S tristate "lcd2s 20x4 character display over I2C console" depends on I2C @@ -201,27 +59,6 @@ config LCD2S is a simple single color character display. You have to connect it to an I2C bus. -config ARM_CHARLCD - bool "ARM Ltd. Character LCD Driver" - depends on PLAT_VERSATILE - help - This is a driver for the character LCD found on the ARM Ltd. - Versatile and RealView Platform Baseboards. It doesn't do - very much more than display the text "ARM Linux" on the first - line and the Linux version on the second line, but that's - still useful. - -config SEG_LED_GPIO - tristate "Generic 7-segment LED display" - depends on GPIOLIB || COMPILE_TEST - select LINEDISP - help - This driver supports a generic 7-segment LED display made up - of GPIO pins connected to the individual segments. - - This driver can also be built as a module. If so, the module - will be called seg-led-gpio. - menuconfig PARPORT_PANEL tristate "Parallel port LCD/Keypad Panel support" depends on PARPORT @@ -480,7 +317,6 @@ endif # PARPORT_PANEL config PANEL_CHANGE_MESSAGE bool "Change LCD initialization message ?" depends on CHARLCD - default "n" help This allows you to replace the boot message indicating the kernel version and the driver version with a custom message. This is useful on appliances @@ -529,8 +365,184 @@ choice endchoice +# +# Samsung KS0108 LCD controller section +# +config KS0108 + tristate "KS0108 LCD Controller" + depends on PARPORT_PC + help + If you have a LCD controlled by one or more KS0108 + controllers, say Y. You will need also another more specific + driver for your LCD. + + Depends on Parallel Port support. If you say Y at + parport, you will be able to compile this as a module (M) + and built-in as well (Y). + + To compile this as a module, choose M here: + the module will be called ks0108. + + If unsure, say N. + +config KS0108_PORT + hex "Parallel port where the LCD is connected" + depends on KS0108 + default 0x378 + help + The address of the parallel port where the LCD is connected. + + The first standard parallel port address is 0x378. + The second standard parallel port address is 0x278. + The third standard parallel port address is 0x3BC. + + You can specify a different address if you need. + + If you don't know what I'm talking about, load the parport module, + and execute "dmesg" or "cat /proc/ioports". You can see there how + many parallel ports are present and which address each one has. + + Usually you only need to use 0x378. + + If you compile this as a module, you can still override this + using the module parameters. + +config KS0108_DELAY + int "Delay between each control writing (microseconds)" + depends on KS0108 + default "2" + help + Amount of time the ks0108 should wait between each control write + to the parallel port. + + If your LCD seems to miss random writings, increment this. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +config CFAG12864B + tristate "CFAG12864B LCD" + depends on X86 + depends on FB + depends on KS0108 + select FB_SYSMEM_HELPERS + help + If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, + say Y. You also need the ks0108 LCD Controller driver. + + For help about how to wire your LCD to the parallel port, + check Documentation/admin-guide/auxdisplay/cfag12864b.rst + + Depends on the x86 arch and the framebuffer support. + + The LCD framebuffer driver can be attached to a console. + It will work fine. However, you can't attach it to the fbdev driver + of the xorg server. + + To compile this as a module, choose M here: + the modules will be called cfag12864b and cfag12864bfb. + + If unsure, say N. + +config CFAG12864B_RATE + int "Refresh rate (hertz)" + depends on CFAG12864B + default "20" + help + Refresh rate of the LCD. + + As the LCD is not memory mapped, the driver has to make the work by + software. This means you should be careful setting this value higher. + If your CPUs are really slow or you feel the system is slowed down, + decrease the value. + + Be careful modifying this value to a very high value: + You can freeze the computer, or the LCD maybe can't draw as fast as you + are requesting. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +# +# Single character line display section +# +config LINEDISP + tristate "Character line display core support" if COMPILE_TEST + help + This is the core support for single-line character displays, to be + selected by drivers that use it. + +config IMG_ASCII_LCD + tristate "Imagination Technologies ASCII LCD Display" + depends on HAS_IOMEM + default y if MIPS_MALTA + select MFD_SYSCON + select LINEDISP + help + Enable this to support the simple ASCII LCD displays found on + development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 + from Imagination Technologies. + +config HT16K33 + tristate "Holtek Ht16K33 LED controller with keyscan" + depends on FB && I2C && INPUT + select FB_SYSMEM_HELPERS + select INPUT_MATRIXKMAP + select FB_BACKLIGHT + select NEW_LEDS + select LEDS_CLASS + select LINEDISP + help + Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 + LED controller driver with keyscan. + +config MAX6959 + tristate "Maxim MAX6958/6959 7-segment LED controller" + depends on I2C + select REGMAP_I2C + select LINEDISP + help + If you say yes here you get support for the following Maxim chips + (I2C 7-segment LED display controller): + - MAX6958 + - MAX6959 (input support) + + This driver can also be built as a module. If so, the module + will be called max6959. + +config SEG_LED_GPIO + tristate "Generic 7-segment LED display" + depends on GPIOLIB || COMPILE_TEST + select LINEDISP + help + This driver supports a generic 7-segment LED display made up + of GPIO pins connected to the individual segments. + + This driver can also be built as a module. If so, the module + will be called seg-led-gpio. + +# +# Character LCD with non-conforming interface section +# +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + endif # AUXDISPLAY +# +# Deprecated options +# config PANEL tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)" depends on PARPORT diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile index 4a8ea41b0550..f5c13ed1cd4f 100644 --- a/drivers/auxdisplay/Makefile +++ b/drivers/auxdisplay/Makefile @@ -3,16 +3,16 @@ # Makefile for the kernel auxiliary displays device drivers. # -obj-$(CONFIG_CHARLCD) += charlcd.o -obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o -obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o -obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_CHARLCD) += charlcd.o +obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o obj-$(CONFIG_HD44780) += hd44780.o obj-$(CONFIG_HT16K33) += ht16k33.o -obj-$(CONFIG_PARPORT_PANEL) += panel.o +obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_LCD2S) += lcd2s.o obj-$(CONFIG_LINEDISP) += line-display.o obj-$(CONFIG_MAX6959) += max6959.o +obj-$(CONFIG_PARPORT_PANEL) += panel.o obj-$(CONFIG_SEG_LED_GPIO) += seg-led-gpio.o diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c index 6d309e4971b6..bb9463814454 100644 --- a/drivers/auxdisplay/charlcd.c +++ b/drivers/auxdisplay/charlcd.c @@ -17,7 +17,9 @@ #include <linux/uaccess.h> #include <linux/workqueue.h> +#ifndef CONFIG_PANEL_BOOT_MESSAGE #include <generated/utsrelease.h> +#endif #include "charlcd.h" @@ -678,4 +680,5 @@ int charlcd_unregister(struct charlcd *lcd) } EXPORT_SYMBOL_GPL(charlcd_unregister); +MODULE_DESCRIPTION("Character LCD core support"); MODULE_LICENSE("GPL"); diff --git a/drivers/auxdisplay/seg-led-gpio.c b/drivers/auxdisplay/seg-led-gpio.c index 35a8dbb1e9d2..183ab3011cbb 100644 --- a/drivers/auxdisplay/seg-led-gpio.c +++ b/drivers/auxdisplay/seg-led-gpio.c @@ -81,14 +81,12 @@ static int seg_led_probe(struct platform_device *pdev) return linedisp_register(&priv->linedisp, dev, 1, &seg_led_linedisp_ops); } -static int seg_led_remove(struct platform_device *pdev) +static void seg_led_remove(struct platform_device *pdev) { struct seg_led_priv *priv = platform_get_drvdata(pdev); cancel_delayed_work_sync(&priv->work); linedisp_unregister(&priv->linedisp); - - return 0; } static const struct of_device_id seg_led_of_match[] = { @@ -99,7 +97,7 @@ MODULE_DEVICE_TABLE(of, seg_led_of_match); static struct platform_driver seg_led_driver = { .probe = seg_led_probe, - .remove = seg_led_remove, + .remove_new = seg_led_remove, .driver = { .name = "seg-led-gpio", .of_match_table = seg_led_of_match, diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 216826c31ee3..638074992c82 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -15,8 +15,6 @@ #define VERSION "0.1" -#define QCA_BDADDR_DEFAULT (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x00, 0x00 }}) - int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver, enum qca_btsoc_type soc_type) { @@ -101,7 +99,8 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) { struct sk_buff *skb; struct edl_event_hdr *edl; - char cmd, build_label[QCA_FW_BUILD_VER_LEN]; + char *build_label; + char cmd; int build_lbl_len, err = 0; bt_dev_dbg(hdev, "QCA read fw build info"); @@ -116,6 +115,11 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) return err; } + if (skb->len < sizeof(*edl)) { + err = -EILSEQ; + goto out; + } + edl = (struct edl_event_hdr *)(skb->data); if (!edl) { bt_dev_err(hdev, "QCA read fw build info with no header"); @@ -131,14 +135,25 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) goto out; } + if (skb->len < sizeof(*edl) + 1) { + err = -EILSEQ; + goto out; + } + build_lbl_len = edl->data[0]; - if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) { - memcpy(build_label, edl->data + 1, build_lbl_len); - *(build_label + build_lbl_len) = '\0'; + + if (skb->len < sizeof(*edl) + 1 + build_lbl_len) { + err = -EILSEQ; + goto out; } + build_label = kstrndup(&edl->data[1], build_lbl_len, GFP_KERNEL); + if (!build_label) + goto out; + hci_set_fw_info(hdev, "%s", build_label); + kfree(build_label); out: kfree_skb(skb); return err; @@ -237,6 +252,11 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid) goto out; } + if (skb->len < 3) { + err = -EILSEQ; + goto out; + } + *bid = (edl->data[1] << 8) + edl->data[2]; bt_dev_dbg(hdev, "%s: bid = %x", __func__, *bid); @@ -267,9 +287,10 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev) } EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd); -static void qca_tlv_check_data(struct hci_dev *hdev, +static int qca_tlv_check_data(struct hci_dev *hdev, struct qca_fw_config *config, - u8 *fw_data, enum qca_btsoc_type soc_type) + u8 *fw_data, size_t fw_size, + enum qca_btsoc_type soc_type) { const u8 *data; u32 type_len; @@ -279,12 +300,16 @@ static void qca_tlv_check_data(struct hci_dev *hdev, struct tlv_type_patch *tlv_patch; struct tlv_type_nvm *tlv_nvm; uint8_t nvm_baud_rate = config->user_baud_rate; + u8 type; config->dnld_mode = QCA_SKIP_EVT_NONE; config->dnld_type = QCA_SKIP_EVT_NONE; switch (config->type) { case ELF_TYPE_PATCH: + if (fw_size < 7) + return -EINVAL; + config->dnld_mode = QCA_SKIP_EVT_VSE_CC; config->dnld_type = QCA_SKIP_EVT_VSE_CC; @@ -293,6 +318,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, bt_dev_dbg(hdev, "File version : 0x%x", fw_data[6]); break; case TLV_TYPE_PATCH: + if (fw_size < sizeof(struct tlv_type_hdr) + sizeof(struct tlv_type_patch)) + return -EINVAL; + tlv = (struct tlv_type_hdr *)fw_data; type_len = le32_to_cpu(tlv->type_len); tlv_patch = (struct tlv_type_patch *)tlv->data; @@ -332,25 +360,64 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; case TLV_TYPE_NVM: + if (fw_size < sizeof(struct tlv_type_hdr)) + return -EINVAL; + tlv = (struct tlv_type_hdr *)fw_data; type_len = le32_to_cpu(tlv->type_len); - length = (type_len >> 8) & 0x00ffffff; + length = type_len >> 8; + type = type_len & 0xff; - BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff); + /* Some NVM files have more than one set of tags, only parse + * the first set when it has type 2 for now. When there is + * more than one set there is an enclosing header of type 4. + */ + if (type == 4) { + if (fw_size < 2 * sizeof(struct tlv_type_hdr)) + return -EINVAL; + + tlv++; + + type_len = le32_to_cpu(tlv->type_len); + length = type_len >> 8; + type = type_len & 0xff; + } + + BT_DBG("TLV Type\t\t : 0x%x", type); BT_DBG("Length\t\t : %d bytes", length); + if (type != 2) + break; + + if (fw_size < length + (tlv->data - fw_data)) + return -EINVAL; + idx = 0; data = tlv->data; - while (idx < length) { + while (idx < length - sizeof(struct tlv_type_nvm)) { tlv_nvm = (struct tlv_type_nvm *)(data + idx); tag_id = le16_to_cpu(tlv_nvm->tag_id); tag_len = le16_to_cpu(tlv_nvm->tag_len); + if (length < idx + sizeof(struct tlv_type_nvm) + tag_len) + return -EINVAL; + /* Update NVM tags as needed */ switch (tag_id) { + case EDL_TAG_ID_BD_ADDR: + if (tag_len != sizeof(bdaddr_t)) + return -EINVAL; + + memcpy(&config->bdaddr, tlv_nvm->data, sizeof(bdaddr_t)); + + break; + case EDL_TAG_ID_HCI: + if (tag_len < 3) + return -EINVAL; + /* HCI transport layer parameters * enabling software inband sleep * onto controller side. @@ -366,6 +433,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; case EDL_TAG_ID_DEEP_SLEEP: + if (tag_len < 1) + return -EINVAL; + /* Sleep enable mask * enabling deep sleep feature on controller. */ @@ -374,14 +444,16 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; } - idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len); + idx += sizeof(struct tlv_type_nvm) + tag_len; } break; default: BT_ERR("Unknown TLV type %d", config->type); - break; + return -EINVAL; } + + return 0; } static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size, @@ -531,7 +603,9 @@ static int qca_download_firmware(struct hci_dev *hdev, memcpy(data, fw->data, size); release_firmware(fw); - qca_tlv_check_data(hdev, config, data, soc_type); + ret = qca_tlv_check_data(hdev, config, data, size, soc_type); + if (ret) + goto out; segment = data; remain = size; @@ -614,7 +688,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome); -static int qca_check_bdaddr(struct hci_dev *hdev) +static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *config) { struct hci_rp_read_bd_addr *bda; struct sk_buff *skb; @@ -638,7 +712,7 @@ static int qca_check_bdaddr(struct hci_dev *hdev) } bda = (struct hci_rp_read_bd_addr *)skb->data; - if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT)) + if (!bacmp(&bda->bdaddr, &config->bdaddr)) set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); kfree_skb(skb); @@ -667,7 +741,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, struct qca_btsoc_version ver, const char *firmware_name) { - struct qca_fw_config config; + struct qca_fw_config config = {}; int err; u8 rom_ver = 0; u32 soc_ver; @@ -852,7 +926,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, break; } - err = qca_check_bdaddr(hdev); + err = qca_check_bdaddr(hdev, &config); if (err) return err; diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h index dc31984f71dc..215433fd76a1 100644 --- a/drivers/bluetooth/btqca.h +++ b/drivers/bluetooth/btqca.h @@ -29,6 +29,7 @@ #define EDL_PATCH_CONFIG_RES_EVT (0x00) #define QCA_DISABLE_LOGGING_SUB_OP (0x14) +#define EDL_TAG_ID_BD_ADDR 2 #define EDL_TAG_ID_HCI (17) #define EDL_TAG_ID_DEEP_SLEEP (27) @@ -47,7 +48,6 @@ #define get_soc_ver(soc_id, rom_ver) \ ((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver))) -#define QCA_FW_BUILD_VER_LEN 255 #define QCA_HSP_GF_SOC_ID 0x1200 #define QCA_HSP_GF_SOC_MASK 0x0000ff00 @@ -94,6 +94,7 @@ struct qca_fw_config { uint8_t user_baud_rate; enum qca_tlv_dnld_mode dnld_mode; enum qca_tlv_dnld_mode dnld_type; + bdaddr_t bdaddr; }; struct edl_event_hdr { diff --git a/drivers/cache/sifive_ccache.c b/drivers/cache/sifive_ccache.c index e9cc8b4786fb..6874b72ec59d 100644 --- a/drivers/cache/sifive_ccache.c +++ b/drivers/cache/sifive_ccache.c @@ -290,7 +290,7 @@ static int __init sifive_ccache_init(void) struct device_node *np; struct resource res; const struct of_device_id *match; - unsigned long quirks; + unsigned long quirks __maybe_unused; int rc; np = of_find_matching_node_and_match(NULL, sifive_ccache_ids, &match); diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c index fbeeaee4ac85..835a19a7a3a0 100644 --- a/drivers/firmware/microchip/mpfs-auto-update.c +++ b/drivers/firmware/microchip/mpfs-auto-update.c @@ -206,10 +206,12 @@ static int mpfs_auto_update_verify_image(struct fw_upload *fw_uploader) if (ret | response->resp_status) { dev_warn(priv->dev, "Verification of Upgrade Image failed!\n"); ret = ret ? ret : -EBADMSG; + goto free_message; } dev_info(priv->dev, "Verification of Upgrade Image passed!\n"); +free_message: devm_kfree(priv->dev, message); free_response: devm_kfree(priv->dev, response); @@ -265,7 +267,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv AUTO_UPDATE_DIRECTORY_WIDTH); memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH); - dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n", + dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n", image_address, directory_address); ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer); @@ -313,7 +315,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const erase.len = round_up(size, (size_t)priv->flash->erasesize); erase.addr = image_address; - dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address); + dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address); ret = mtd_erase(priv->flash, &erase); if (ret) goto out; @@ -323,7 +325,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const * will do all of that itself - including verifying that the bitstream * is valid. */ - dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address); + dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address); ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data); if (ret) goto out; diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index d09c7d728365..9dad67ea2597 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -1193,6 +1193,8 @@ static int edge_detector_update(struct line *line, struct gpio_v2_line_config *lc, unsigned int line_idx, u64 edflags) { + u64 eflags; + int ret; u64 active_edflags = READ_ONCE(line->edflags); unsigned int debounce_period_us = gpio_v2_line_config_debounce_period(lc, line_idx); @@ -1204,6 +1206,18 @@ static int edge_detector_update(struct line *line, /* sw debounced and still will be...*/ if (debounce_period_us && READ_ONCE(line->sw_debounced)) { line_set_debounce_period(line, debounce_period_us); + /* + * ensure event fifo is initialised if edge detection + * is now enabled. + */ + eflags = edflags & GPIO_V2_LINE_EDGE_FLAGS; + if (eflags && !kfifo_initialized(&line->req->events)) { + ret = kfifo_alloc(&line->req->events, + line->req->event_buffer_size, + GFP_KERNEL); + if (ret) + return ret; + } return 0; } @@ -2351,7 +2365,7 @@ static void gpio_desc_to_lineinfo(struct gpio_desc *desc, dflags = READ_ONCE(desc->flags); - scoped_guard(srcu, &desc->srcu) { + scoped_guard(srcu, &desc->gdev->desc_srcu) { label = gpiod_get_label(desc); if (label && test_bit(FLAG_REQUESTED, &dflags)) strscpy(info->consumer, label, @@ -2799,11 +2813,11 @@ static int gpio_chrdev_release(struct inode *inode, struct file *file) struct gpio_chardev_data *cdev = file->private_data; struct gpio_device *gdev = cdev->gdev; - bitmap_free(cdev->watched_lines); blocking_notifier_chain_unregister(&gdev->device_notifier, &cdev->device_unregistered_nb); blocking_notifier_chain_unregister(&gdev->line_state_notifier, &cdev->lineinfo_changed_nb); + bitmap_free(cdev->watched_lines); gpio_device_put(gdev); kfree(cdev); diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 94903fc1c145..fa50db0c3605 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -101,6 +101,7 @@ static bool gpiolib_initialized; const char *gpiod_get_label(struct gpio_desc *desc) { + struct gpio_desc_label *label; unsigned long flags; flags = READ_ONCE(desc->flags); @@ -108,23 +109,36 @@ const char *gpiod_get_label(struct gpio_desc *desc) !test_bit(FLAG_REQUESTED, &flags)) return "interrupt"; - return test_bit(FLAG_REQUESTED, &flags) ? - srcu_dereference(desc->label, &desc->srcu) : NULL; + if (!test_bit(FLAG_REQUESTED, &flags)) + return NULL; + + label = srcu_dereference_check(desc->label, &desc->gdev->desc_srcu, + srcu_read_lock_held(&desc->gdev->desc_srcu)); + + return label->str; +} + +static void desc_free_label(struct rcu_head *rh) +{ + kfree(container_of(rh, struct gpio_desc_label, rh)); } static int desc_set_label(struct gpio_desc *desc, const char *label) { - const char *new = NULL, *old; + struct gpio_desc_label *new = NULL, *old; if (label) { - new = kstrdup_const(label, GFP_KERNEL); + new = kzalloc(struct_size(new, str, strlen(label) + 1), + GFP_KERNEL); if (!new) return -ENOMEM; + + strcpy(new->str, label); } old = rcu_replace_pointer(desc->label, new, 1); - synchronize_srcu(&desc->srcu); - kfree_const(old); + if (old) + call_srcu(&desc->gdev->desc_srcu, &old->rh, desc_free_label); return 0; } @@ -695,10 +709,10 @@ EXPORT_SYMBOL_GPL(gpiochip_line_is_valid); static void gpiodev_release(struct device *dev) { struct gpio_device *gdev = to_gpio_device(dev); - unsigned int i; - for (i = 0; i < gdev->ngpio; i++) - cleanup_srcu_struct(&gdev->descs[i].srcu); + /* Call pending kfree()s for descriptor labels. */ + synchronize_srcu(&gdev->desc_srcu); + cleanup_srcu_struct(&gdev->desc_srcu); ida_free(&gpio_ida, gdev->id); kfree_const(gdev->label); @@ -975,6 +989,10 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, if (ret) goto err_remove_from_list; + ret = init_srcu_struct(&gdev->desc_srcu); + if (ret) + goto err_cleanup_gdev_srcu; + #ifdef CONFIG_PINCTRL INIT_LIST_HEAD(&gdev->pin_ranges); #endif @@ -982,23 +1000,19 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, if (gc->names) { ret = gpiochip_set_desc_names(gc); if (ret) - goto err_cleanup_gdev_srcu; + goto err_cleanup_desc_srcu; } ret = gpiochip_set_names(gc); if (ret) - goto err_cleanup_gdev_srcu; + goto err_cleanup_desc_srcu; ret = gpiochip_init_valid_mask(gc); if (ret) - goto err_cleanup_gdev_srcu; + goto err_cleanup_desc_srcu; for (desc_index = 0; desc_index < gc->ngpio; desc_index++) { struct gpio_desc *desc = &gdev->descs[desc_index]; - ret = init_srcu_struct(&desc->srcu); - if (ret) - goto err_cleanup_desc_srcu; - if (gc->get_direction && gpiochip_line_is_valid(gc, desc_index)) { assign_bit(FLAG_IS_OUT, &desc->flags, !gc->get_direction(gc, desc_index)); @@ -1010,7 +1024,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, ret = of_gpiochip_add(gc); if (ret) - goto err_cleanup_desc_srcu; + goto err_free_valid_mask; ret = gpiochip_add_pin_ranges(gc); if (ret) @@ -1057,10 +1071,10 @@ err_free_hogs: gpiochip_remove_pin_ranges(gc); err_remove_of_chip: of_gpiochip_remove(gc); -err_cleanup_desc_srcu: - while (desc_index--) - cleanup_srcu_struct(&gdev->descs[desc_index].srcu); +err_free_valid_mask: gpiochip_free_valid_mask(gc); +err_cleanup_desc_srcu: + cleanup_srcu_struct(&gdev->desc_srcu); err_cleanup_gdev_srcu: cleanup_srcu_struct(&gdev->srcu); err_remove_from_list: @@ -2390,7 +2404,7 @@ char *gpiochip_dup_line_label(struct gpio_chip *gc, unsigned int offset) if (!test_bit(FLAG_REQUESTED, &desc->flags)) return NULL; - guard(srcu)(&desc->srcu); + guard(srcu)(&desc->gdev->desc_srcu); label = kstrdup(gpiod_get_label(desc), GFP_KERNEL); if (!label) @@ -4781,7 +4795,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev) } for_each_gpio_desc(gc, desc) { - guard(srcu)(&desc->srcu); + guard(srcu)(&desc->gdev->desc_srcu); if (test_bit(FLAG_REQUESTED, &desc->flags)) { gpiod_get_direction(desc); is_out = test_bit(FLAG_IS_OUT, &desc->flags); diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h index f67d5991ab1c..8e0e211ebf08 100644 --- a/drivers/gpio/gpiolib.h +++ b/drivers/gpio/gpiolib.h @@ -31,6 +31,7 @@ * @chip: pointer to the corresponding gpiochip, holding static * data for this device * @descs: array of ngpio descriptors. + * @desc_srcu: ensures consistent state of GPIO descriptors exposed to users * @ngpio: the number of GPIO lines on this GPIO device, equal to the size * of the @descs array. * @can_sleep: indicate whether the GPIO chip driver's callbacks can sleep @@ -61,6 +62,7 @@ struct gpio_device { struct module *owner; struct gpio_chip __rcu *chip; struct gpio_desc *descs; + struct srcu_struct desc_srcu; int base; u16 ngpio; bool can_sleep; @@ -137,6 +139,11 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory); void gpiod_line_state_notify(struct gpio_desc *desc, unsigned long action); +struct gpio_desc_label { + struct rcu_head rh; + char str[]; +}; + /** * struct gpio_desc - Opaque descriptor for a GPIO * @@ -145,7 +152,6 @@ void gpiod_line_state_notify(struct gpio_desc *desc, unsigned long action); * @label: Name of the consumer * @name: Line name * @hog: Pointer to the device node that hogs this line (if any) - * @srcu: SRCU struct protecting the label pointer. * * These are obtained using gpiod_get() and are preferable to the old * integer-based handles. @@ -177,13 +183,12 @@ struct gpio_desc { #define FLAG_EVENT_CLOCK_HTE 19 /* GPIO CDEV reports hardware timestamps in events */ /* Connection label */ - const char __rcu *label; + struct gpio_desc_label __rcu *label; /* Name of the GPIO */ const char *name; #ifdef CONFIG_OF_DYNAMIC struct device_node *hog; #endif - struct srcu_struct srcu; }; #define gpiod_not_found(desc) (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) @@ -251,7 +256,7 @@ static inline int gpio_chip_hwgpio(const struct gpio_desc *desc) #define gpiod_err(desc, fmt, ...) \ do { \ - scoped_guard(srcu, &desc->srcu) { \ + scoped_guard(srcu, &desc->gdev->desc_srcu) { \ pr_err("gpio-%d (%s): " fmt, desc_to_gpio(desc), \ gpiod_get_label(desc) ? : "?", ##__VA_ARGS__); \ } \ @@ -259,7 +264,7 @@ do { \ #define gpiod_warn(desc, fmt, ...) \ do { \ - scoped_guard(srcu, &desc->srcu) { \ + scoped_guard(srcu, &desc->gdev->desc_srcu) { \ pr_warn("gpio-%d (%s): " fmt, desc_to_gpio(desc), \ gpiod_get_label(desc) ? : "?", ##__VA_ARGS__); \ } \ @@ -267,7 +272,7 @@ do { \ #define gpiod_dbg(desc, fmt, ...) \ do { \ - scoped_guard(srcu, &desc->srcu) { \ + scoped_guard(srcu, &desc->gdev->desc_srcu) { \ pr_debug("gpio-%d (%s): " fmt, desc_to_gpio(desc), \ gpiod_get_label(desc) ? : "?", ##__VA_ARGS__); \ } \ diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c index 9febc8b73f09..368d26da0d6a 100644 --- a/drivers/gpu/drm/qxl/qxl_release.c +++ b/drivers/gpu/drm/qxl/qxl_release.c @@ -58,56 +58,16 @@ static long qxl_fence_wait(struct dma_fence *fence, bool intr, signed long timeout) { struct qxl_device *qdev; - struct qxl_release *release; - int count = 0, sc = 0; - bool have_drawable_releases; unsigned long cur, end = jiffies + timeout; qdev = container_of(fence->lock, struct qxl_device, release_lock); - release = container_of(fence, struct qxl_release, base); - have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE; - -retry: - sc++; - - if (dma_fence_is_signaled(fence)) - goto signaled; - - qxl_io_notify_oom(qdev); - - for (count = 0; count < 11; count++) { - if (!qxl_queue_garbage_collect(qdev, true)) - break; - - if (dma_fence_is_signaled(fence)) - goto signaled; - } - - if (dma_fence_is_signaled(fence)) - goto signaled; - if (have_drawable_releases || sc < 4) { - if (sc > 2) - /* back off */ - usleep_range(500, 1000); - - if (time_after(jiffies, end)) - return 0; - - if (have_drawable_releases && sc > 300) { - DMA_FENCE_WARN(fence, - "failed to wait on release %llu after spincount %d\n", - fence->context & ~0xf0000000, sc); - goto signaled; - } - goto retry; - } - /* - * yeah, original sync_obj_wait gave up after 3 spins when - * have_drawable_releases is not set. - */ + if (!wait_event_timeout(qdev->release_event, + (dma_fence_is_signaled(fence) || + (qxl_io_notify_oom(qdev), 0)), + timeout)) + return 0; -signaled: cur = jiffies; if (time_after(cur, end)) return 0; diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c index a284a02839fb..3e63666a61bd 100644 --- a/drivers/hwmon/corsair-cpro.c +++ b/drivers/hwmon/corsair-cpro.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/slab.h> +#include <linux/spinlock.h> #include <linux/types.h> #define USB_VENDOR_ID_CORSAIR 0x1b1c @@ -77,8 +78,11 @@ struct ccp_device { struct hid_device *hdev; struct device *hwmon_dev; + /* For reinitializing the completion below */ + spinlock_t wait_input_report_lock; struct completion wait_input_report; struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *cmd_buffer; u8 *buffer; int target[6]; DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); @@ -111,15 +115,23 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, unsigned long t; int ret; - memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); - ccp->buffer[0] = command; - ccp->buffer[1] = byte1; - ccp->buffer[2] = byte2; - ccp->buffer[3] = byte3; - + memset(ccp->cmd_buffer, 0x00, OUT_BUFFER_SIZE); + ccp->cmd_buffer[0] = command; + ccp->cmd_buffer[1] = byte1; + ccp->cmd_buffer[2] = byte2; + ccp->cmd_buffer[3] = byte3; + + /* + * Disable raw event parsing for a moment to safely reinitialize the + * completion. Reinit is done because hidraw could have triggered + * the raw event parsing and marked the ccp->wait_input_report + * completion as done. + */ + spin_lock_bh(&ccp->wait_input_report_lock); reinit_completion(&ccp->wait_input_report); + spin_unlock_bh(&ccp->wait_input_report_lock); - ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE); + ret = hid_hw_output_report(ccp->hdev, ccp->cmd_buffer, OUT_BUFFER_SIZE); if (ret < 0) return ret; @@ -135,11 +147,12 @@ static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 struct ccp_device *ccp = hid_get_drvdata(hdev); /* only copy buffer when requested */ - if (completion_done(&ccp->wait_input_report)) - return 0; - - memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); - complete(&ccp->wait_input_report); + spin_lock(&ccp->wait_input_report_lock); + if (!completion_done(&ccp->wait_input_report)) { + memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size)); + complete_all(&ccp->wait_input_report); + } + spin_unlock(&ccp->wait_input_report_lock); return 0; } @@ -492,7 +505,11 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (!ccp) return -ENOMEM; - ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + ccp->cmd_buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->cmd_buffer) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&hdev->dev, IN_BUFFER_SIZE, GFP_KERNEL); if (!ccp->buffer) return -ENOMEM; @@ -510,7 +527,9 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id) ccp->hdev = hdev; hid_set_drvdata(hdev, ccp); + mutex_init(&ccp->mutex); + spin_lock_init(&ccp->wait_input_report_lock); init_completion(&ccp->wait_input_report); hid_device_io_start(hdev); diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index 8d9d422450e5..d817c719b90b 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -80,11 +80,11 @@ struct ucd9000_debugfs_entry { * It has been observed that the UCD90320 randomly fails register access when * doing another access right on the back of a register write. To mitigate this * make sure that there is a minimum delay between a write access and the - * following access. The 250us is based on experimental data. At a delay of - * 200us the issue seems to go away. Add a bit of extra margin to allow for + * following access. The 500 is based on experimental data. At a delay of + * 350us the issue seems to go away. Add a bit of extra margin to allow for * system to system differences. */ -#define UCD90320_WAIT_DELAY_US 250 +#define UCD90320_WAIT_DELAY_US 500 static inline void ucd90320_wait(const struct ucd9000_data *data) { diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c index 455e966eeff3..b27791029fa9 100644 --- a/drivers/infiniband/hw/qib/qib_fs.c +++ b/drivers/infiniband/hw/qib/qib_fs.c @@ -439,6 +439,7 @@ static int remove_device_files(struct super_block *sb, return PTR_ERR(dir); } simple_recursive_removal(dir, NULL); + dput(dir); return 0; } diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index e692217fcb28..fb727f5b0b82 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -2754,6 +2754,10 @@ static int amd_iommu_def_domain_type(struct device *dev) if (!dev_data) return 0; + /* Always use DMA domain for untrusted device */ + if (dev_is_pci(dev) && to_pci_dev(dev)->untrusted) + return IOMMU_DOMAIN_DMA; + /* * Do not identity map IOMMUv2 capable devices when: * - memory encryption is active, because some of those devices diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c index 87bf522b9d2e..957d988b6d83 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c @@ -221,11 +221,9 @@ static irqreturn_t nvidia_smmu_context_fault(int irq, void *dev) unsigned int inst; irqreturn_t ret = IRQ_NONE; struct arm_smmu_device *smmu; - struct iommu_domain *domain = dev; - struct arm_smmu_domain *smmu_domain; + struct arm_smmu_domain *smmu_domain = dev; struct nvidia_smmu *nvidia; - smmu_domain = container_of(domain, struct arm_smmu_domain, domain); smmu = smmu_domain->smmu; nvidia = to_nvidia_smmu(smmu); diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 14daf432f30b..0918bd6fa81d 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -637,12 +637,12 @@ static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, MAC_1000FD; } -static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) +static int mv88e63xx_get_port_serdes_cmode(struct mv88e6xxx_chip *chip, int port) { u16 reg, val; int err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, ®); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); if (err) return err; @@ -651,16 +651,16 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) return 0xf; val = reg & ~MV88E6XXX_PORT_STS_PHY_DETECT; - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, val); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, val); if (err) return err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &val); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val); if (err) return err; /* Restore PHY_DETECT value */ - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, reg); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg); if (err) return err; @@ -688,7 +688,30 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, if (err <= 0) return; - cmode = mv88e6352_get_port4_serdes_cmode(chip); + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); + if (cmode < 0) + dev_err(chip->dev, "p%d: failed to read serdes cmode\n", + port); + else + mv88e6xxx_translate_cmode(cmode, supported); + } +} + +static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + int cmode; + + /* Translate the default cmode */ + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; + + /* Port 0/1 are serdes only ports */ + if (port == 0 || port == 1) { + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); if (cmode < 0) dev_err(chip->dev, "p%d: failed to read serdes cmode\n", port); @@ -5093,7 +5116,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6321_ops = { @@ -5139,7 +5162,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6341_ops = { diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index f19f1e1d1f9f..133c94646c21 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -897,7 +897,7 @@ struct hnae3_handle { struct hnae3_roce_private_info rinfo; }; - u32 numa_node_mask; /* for multi-chip support */ + nodemask_t numa_node_mask; /* for multi-chip support */ enum hnae3_port_base_vlan_state port_base_vlan_state; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index ff6a2ed23ddb..ce60332d83c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -1537,6 +1537,9 @@ static int hclge_configure(struct hclge_dev *hdev) cfg.default_speed, ret); return ret; } + hdev->hw.mac.req_speed = hdev->hw.mac.speed; + hdev->hw.mac.req_autoneg = AUTONEG_ENABLE; + hdev->hw.mac.req_duplex = DUPLEX_FULL; hclge_parse_link_mode(hdev, cfg.speed_ability); @@ -1766,7 +1769,8 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps) nic->pdev = hdev->pdev; nic->ae_algo = &ae_algo; - nic->numa_node_mask = hdev->numa_node_mask; + bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits, + MAX_NUMNODES); nic->kinfo.io_base = hdev->hw.hw.io_base; ret = hclge_knic_setup(vport, num_tqps, @@ -2458,7 +2462,8 @@ static int hclge_init_roce_base_info(struct hclge_vport *vport) roce->pdev = nic->pdev; roce->ae_algo = nic->ae_algo; - roce->numa_node_mask = nic->numa_node_mask; + bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits, + MAX_NUMNODES); return 0; } @@ -3342,9 +3347,9 @@ hclge_set_phy_link_ksettings(struct hnae3_handle *handle, return ret; } - hdev->hw.mac.autoneg = cmd->base.autoneg; - hdev->hw.mac.speed = cmd->base.speed; - hdev->hw.mac.duplex = cmd->base.duplex; + hdev->hw.mac.req_autoneg = cmd->base.autoneg; + hdev->hw.mac.req_speed = cmd->base.speed; + hdev->hw.mac.req_duplex = cmd->base.duplex; linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising); return 0; @@ -3377,9 +3382,9 @@ static int hclge_tp_port_init(struct hclge_dev *hdev) if (!hnae3_dev_phy_imp_supported(hdev)) return 0; - cmd.base.autoneg = hdev->hw.mac.autoneg; - cmd.base.speed = hdev->hw.mac.speed; - cmd.base.duplex = hdev->hw.mac.duplex; + cmd.base.autoneg = hdev->hw.mac.req_autoneg; + cmd.base.speed = hdev->hw.mac.req_speed; + cmd.base.duplex = hdev->hw.mac.req_duplex; linkmode_copy(cmd.link_modes.advertising, hdev->hw.mac.advertising); return hclge_set_phy_link_ksettings(&hdev->vport->nic, &cmd); @@ -7952,8 +7957,7 @@ static void hclge_set_timer_task(struct hnae3_handle *handle, bool enable) /* Set the DOWN flag here to disable link updating */ set_bit(HCLGE_STATE_DOWN, &hdev->state); - /* flush memory to make sure DOWN is seen by service task */ - smp_mb__before_atomic(); + smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */ hclge_flush_link_update(hdev); } } @@ -9906,6 +9910,7 @@ static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev) static int hclge_init_vlan_filter(struct hclge_dev *hdev) { struct hclge_vport *vport; + bool enable = true; int ret; int i; @@ -9925,8 +9930,12 @@ static int hclge_init_vlan_filter(struct hclge_dev *hdev) vport->cur_vlan_fltr_en = true; } + if (test_bit(HNAE3_DEV_SUPPORT_VLAN_FLTR_MDF_B, hdev->ae_dev->caps) && + !test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, hdev->ae_dev->caps)) + enable = false; + return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, - HCLGE_FILTER_FE_INGRESS, true, 0); + HCLGE_FILTER_FE_INGRESS, enable, 0); } static int hclge_init_vlan_type(struct hclge_dev *hdev) @@ -11622,16 +11631,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) if (ret) goto out; - ret = hclge_devlink_init(hdev); - if (ret) - goto err_pci_uninit; - - devl_lock(hdev->devlink); - /* Firmware command queue initialize */ ret = hclge_comm_cmd_queue_init(hdev->pdev, &hdev->hw.hw); if (ret) - goto err_devlink_uninit; + goto err_pci_uninit; /* Firmware command initialize */ ret = hclge_comm_cmd_init(hdev->ae_dev, &hdev->hw.hw, &hdev->fw_version, @@ -11759,7 +11762,7 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) ret = hclge_update_port_info(hdev); if (ret) - goto err_mdiobus_unreg; + goto err_ptp_uninit; INIT_KFIFO(hdev->mac_tnl_log); @@ -11799,6 +11802,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) dev_warn(&pdev->dev, "failed to wake on lan init, ret = %d\n", ret); + ret = hclge_devlink_init(hdev); + if (ret) + goto err_ptp_uninit; + hclge_state_init(hdev); hdev->last_reset_time = jiffies; @@ -11806,10 +11813,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) HCLGE_DRIVER_NAME); hclge_task_schedule(hdev, round_jiffies_relative(HZ)); - - devl_unlock(hdev->devlink); return 0; +err_ptp_uninit: + hclge_ptp_uninit(hdev); err_mdiobus_unreg: if (hdev->hw.mac.phydev) mdiobus_unregister(hdev->hw.mac.mdio_bus); @@ -11819,9 +11826,6 @@ err_msi_uninit: pci_free_irq_vectors(pdev); err_cmd_uninit: hclge_comm_cmd_uninit(hdev->ae_dev, &hdev->hw.hw); -err_devlink_uninit: - devl_unlock(hdev->devlink); - hclge_devlink_uninit(hdev); err_pci_uninit: pcim_iounmap(pdev, hdev->hw.hw.io_base); pci_release_regions(pdev); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index e821dd2f1528..3a9186457ad8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -279,11 +279,14 @@ struct hclge_mac { u8 media_type; /* port media type, e.g. fibre/copper/backplane */ u8 mac_addr[ETH_ALEN]; u8 autoneg; + u8 req_autoneg; u8 duplex; + u8 req_duplex; u8 support_autoneg; u8 speed_type; /* 0: sfp speed, 1: active speed */ u8 lane_num; u32 speed; + u32 req_speed; u32 max_speed; u32 speed_ability; /* speed ability supported by current media */ u32 module_type; /* sub media type, e.g. kr/cr/sr/lr */ @@ -891,7 +894,7 @@ struct hclge_dev { u16 fdir_pf_filter_count; /* Num of guaranteed filters for this PF */ u16 num_alloc_vport; /* Num vports this driver supports */ - u32 numa_node_mask; + nodemask_t numa_node_mask; u16 rx_buf_len; u16 num_tx_desc; /* desc num of per tx queue */ u16 num_rx_desc; /* desc num of per rx queue */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index d4a0e0be7a72..59c863306657 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -1077,12 +1077,13 @@ static void hclge_mbx_request_handling(struct hclge_mbx_ops_param *param) hdev = param->vport->back; cmd_func = hclge_mbx_ops_list[param->req->msg.code]; - if (cmd_func) - ret = cmd_func(param); - else + if (!cmd_func) { dev_err(&hdev->pdev->dev, "un-supported mailbox message, code = %u\n", param->req->msg.code); + return; + } + ret = cmd_func(param); /* PF driver should not reply IMP */ if (hnae3_get_bit(param->req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) && diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 0aa9beefd1c7..43ee20eb03d1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -412,7 +412,8 @@ static int hclgevf_set_handle_info(struct hclgevf_dev *hdev) nic->ae_algo = &ae_algovf; nic->pdev = hdev->pdev; - nic->numa_node_mask = hdev->numa_node_mask; + bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits, + MAX_NUMNODES); nic->flags |= HNAE3_SUPPORT_VF; nic->kinfo.io_base = hdev->hw.hw.io_base; @@ -2082,8 +2083,8 @@ static int hclgevf_init_roce_base_info(struct hclgevf_dev *hdev) roce->pdev = nic->pdev; roce->ae_algo = nic->ae_algo; - roce->numa_node_mask = nic->numa_node_mask; - + bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits, + MAX_NUMNODES); return 0; } @@ -2180,8 +2181,7 @@ static void hclgevf_set_timer_task(struct hnae3_handle *handle, bool enable) } else { set_bit(HCLGEVF_STATE_DOWN, &hdev->state); - /* flush memory to make sure DOWN is seen by service task */ - smp_mb__before_atomic(); + smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */ hclgevf_flush_link_update(hdev); } } @@ -2845,10 +2845,6 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) if (ret) return ret; - ret = hclgevf_devlink_init(hdev); - if (ret) - goto err_devlink_init; - ret = hclge_comm_cmd_queue_init(hdev->pdev, &hdev->hw.hw); if (ret) goto err_cmd_queue_init; @@ -2941,6 +2937,10 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) hclgevf_init_rxd_adv_layout(hdev); + ret = hclgevf_devlink_init(hdev); + if (ret) + goto err_config; + set_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state); hdev->last_reset_time = jiffies; @@ -2960,8 +2960,6 @@ err_misc_irq_init: err_cmd_init: hclge_comm_cmd_uninit(hdev->ae_dev, &hdev->hw.hw); err_cmd_queue_init: - hclgevf_devlink_uninit(hdev); -err_devlink_init: hclgevf_pci_uninit(hdev); clear_bit(HCLGEVF_STATE_IRQ_INITED, &hdev->state); return ret; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index a73f2bf3a56a..cccef3228461 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -236,7 +236,7 @@ struct hclgevf_dev { u16 rss_size_max; /* HW defined max RSS task queue */ u16 num_alloc_vport; /* num vports this driver supports */ - u32 numa_node_mask; + nodemask_t numa_node_mask; u16 rx_buf_len; u16 num_tx_desc; /* desc num of per tx queue */ u16 num_rx_desc; /* desc num of per rx queue */ diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index d4cdf3d4f552..502518cdb461 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -234,12 +234,13 @@ static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt) /** * ks8851_rx_pkts - receive packets from the host * @ks: The device information. + * @rxq: Queue of packets received in this function. * * This is called from the IRQ work queue when the system detects that there * are packets in the receive queue. Find out how many packets there are and * read them from the FIFO. */ -static void ks8851_rx_pkts(struct ks8851_net *ks) +static void ks8851_rx_pkts(struct ks8851_net *ks, struct sk_buff_head *rxq) { struct sk_buff *skb; unsigned rxfc; @@ -299,7 +300,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) ks8851_dbg_dumpkkt(ks, rxpkt); skb->protocol = eth_type_trans(skb, ks->netdev); - __netif_rx(skb); + __skb_queue_tail(rxq, skb); ks->netdev->stats.rx_packets++; ks->netdev->stats.rx_bytes += rxlen; @@ -326,11 +327,11 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) static irqreturn_t ks8851_irq(int irq, void *_ks) { struct ks8851_net *ks = _ks; + struct sk_buff_head rxq; unsigned handled = 0; unsigned long flags; unsigned int status; - - local_bh_disable(); + struct sk_buff *skb; ks8851_lock(ks, &flags); @@ -384,7 +385,8 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) * from the device so do not bother masking just the RX * from the device. */ - ks8851_rx_pkts(ks); + __skb_queue_head_init(&rxq); + ks8851_rx_pkts(ks, &rxq); } /* if something stopped the rx process, probably due to wanting @@ -408,7 +410,9 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) if (status & IRQ_LCI) mii_check_link(&ks->mii); - local_bh_enable(); + if (status & IRQ_RXI) + while ((skb = __skb_dequeue(&rxq))) + netif_rx(skb); return IRQ_HANDLED; } diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c index 6b4bd9883304..c812f16eaa3a 100644 --- a/drivers/net/phy/marvell-88q2xxx.c +++ b/drivers/net/phy/marvell-88q2xxx.c @@ -12,6 +12,8 @@ #include <linux/hwmon.h> #define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1) +#define PHY_ID_88Q2220_REVB1 (MARVELL_PHY_ID_88Q2220 | 0x2) +#define PHY_ID_88Q2220_REVB2 (MARVELL_PHY_ID_88Q2220 | 0x3) #define MDIO_MMD_AN_MV_STAT 32769 #define MDIO_MMD_AN_MV_STAT_ANEG 0x0100 @@ -129,6 +131,49 @@ static const struct mmd_val mv88q222x_revb0_init_seq1[] = { { MDIO_MMD_PCS, 0xfe05, 0x755c }, }; +static const struct mmd_val mv88q222x_revb1_init_seq0[] = { + { MDIO_MMD_PCS, 0xffe4, 0x0007 }, + { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 }, + { MDIO_MMD_PCS, 0xffe3, 0x7000 }, + { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 }, +}; + +static const struct mmd_val mv88q222x_revb2_init_seq0[] = { + { MDIO_MMD_PCS, 0xffe4, 0x0007 }, + { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 }, + { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 }, +}; + +static const struct mmd_val mv88q222x_revb1_revb2_init_seq1[] = { + { MDIO_MMD_PCS, 0xfe07, 0x125a }, + { MDIO_MMD_PCS, 0xfe09, 0x1288 }, + { MDIO_MMD_PCS, 0xfe08, 0x2588 }, + { MDIO_MMD_PCS, 0xfe72, 0x042c }, + { MDIO_MMD_PCS, 0xffe4, 0x0071 }, + { MDIO_MMD_PCS, 0xffe4, 0x0001 }, + { MDIO_MMD_PCS, 0xfe1b, 0x0048 }, + { MDIO_MMD_PMAPMD, 0x0000, 0x0000 }, + { MDIO_MMD_PCS, 0x0000, 0x0000 }, + { MDIO_MMD_PCS, 0xffdb, 0xfc10 }, + { MDIO_MMD_PCS, 0xfe1b, 0x58 }, + { MDIO_MMD_PCS, 0xfcad, 0x030c }, + { MDIO_MMD_PCS, 0x8032, 0x6001 }, + { MDIO_MMD_PCS, 0xfdff, 0x05a5 }, + { MDIO_MMD_PCS, 0xfdec, 0xdbaf }, + { MDIO_MMD_PCS, 0xfcab, 0x1054 }, + { MDIO_MMD_PCS, 0xfcac, 0x1483 }, + { MDIO_MMD_PCS, 0x8033, 0xc801 }, + { MDIO_MMD_AN, 0x8032, 0x2020 }, + { MDIO_MMD_AN, 0x8031, 0xa28 }, + { MDIO_MMD_AN, 0x8031, 0xc28 }, + { MDIO_MMD_PCS, 0xfbba, 0x0cb2 }, + { MDIO_MMD_PCS, 0xfbbb, 0x0c4a }, + { MDIO_MMD_PCS, 0xfe5f, 0xe8 }, + { MDIO_MMD_PCS, 0xfe05, 0x755c }, + { MDIO_MMD_PCS, 0xfa20, 0x002a }, + { MDIO_MMD_PCS, 0xfe11, 0x1105 }, +}; + static int mv88q2xxx_soft_reset(struct phy_device *phydev) { int ret; @@ -687,31 +732,72 @@ static int mv88q222x_soft_reset(struct phy_device *phydev) return 0; } -static int mv88q222x_revb0_config_init(struct phy_device *phydev) +static int mv88q222x_write_mmd_vals(struct phy_device *phydev, + const struct mmd_val *vals, size_t len) { - int ret, i; + int ret; - for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq0); i++) { - ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq0[i].devad, - mv88q222x_revb0_init_seq0[i].regnum, - mv88q222x_revb0_init_seq0[i].val); + for (; len; vals++, len--) { + ret = phy_write_mmd(phydev, vals->devad, vals->regnum, + vals->val); if (ret < 0) return ret; } + return 0; +} + +static int mv88q222x_revb0_config_init(struct phy_device *phydev) +{ + int ret; + + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0, + ARRAY_SIZE(mv88q222x_revb0_init_seq0)); + if (ret < 0) + return ret; + usleep_range(5000, 10000); - for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq1); i++) { - ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq1[i].devad, - mv88q222x_revb0_init_seq1[i].regnum, - mv88q222x_revb0_init_seq1[i].val); - if (ret < 0) - return ret; - } + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1, + ARRAY_SIZE(mv88q222x_revb0_init_seq1)); + if (ret < 0) + return ret; + + return mv88q2xxx_config_init(phydev); +} + +static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev) +{ + bool is_rev_b1 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB1; + int ret; + + if (is_rev_b1) + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0, + ARRAY_SIZE(mv88q222x_revb1_init_seq0)); + else + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0, + ARRAY_SIZE(mv88q222x_revb2_init_seq0)); + if (ret < 0) + return ret; + + usleep_range(3000, 5000); + + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1, + ARRAY_SIZE(mv88q222x_revb1_revb2_init_seq1)); + if (ret < 0) + return ret; return mv88q2xxx_config_init(phydev); } +static int mv88q222x_config_init(struct phy_device *phydev) +{ + if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0) + return mv88q222x_revb0_config_init(phydev); + else + return mv88q222x_revb1_revb2_config_init(phydev); +} + static int mv88q222x_cable_test_start(struct phy_device *phydev) { int ret; @@ -810,14 +896,15 @@ static struct phy_driver mv88q2xxx_driver[] = { .get_sqi_max = mv88q2xxx_get_sqi_max, }, { - PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), + .phy_id = MARVELL_PHY_ID_88Q2220, + .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88q2220", .flags = PHY_POLL_CABLE_TEST, .probe = mv88q2xxx_probe, .get_features = mv88q2xxx_get_features, .config_aneg = mv88q2xxx_config_aneg, .aneg_done = genphy_c45_aneg_done, - .config_init = mv88q222x_revb0_config_init, + .config_init = mv88q222x_config_init, .read_status = mv88q2xxx_read_status, .soft_reset = mv88q222x_soft_reset, .config_intr = mv88q2xxx_config_intr, @@ -836,7 +923,7 @@ module_phy_driver(mv88q2xxx_driver); static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = { { MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK }, - { PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), }, + { MARVELL_PHY_ID_88Q2220, MARVELL_PHY_ID_MASK }, { /*sentinel*/ } }; MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index b564c5f1450c..05532c281177 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -162,6 +162,11 @@ enum nvme_quirks { * Disables simple suspend/resume path. */ NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND = (1 << 20), + + /* + * MSI (but not MSI-X) interrupts are broken and never fire. + */ + NVME_QUIRK_BROKEN_MSI = (1 << 21), }; /* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index e393f6947ce4..710043086dff 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2224,6 +2224,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) .priv = dev, }; unsigned int irq_queues, poll_queues; + unsigned int flags = PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY; /* * Poll queues don't need interrupts, but we need at least one I/O queue @@ -2247,8 +2248,10 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) irq_queues = 1; if (!(dev->ctrl.quirks & NVME_QUIRK_SINGLE_VECTOR)) irq_queues += (nr_io_queues - poll_queues); - return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues, - PCI_IRQ_ALL_TYPES | PCI_IRQ_AFFINITY, &affd); + if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI) + flags &= ~PCI_IRQ_MSI; + return pci_alloc_irq_vectors_affinity(pdev, 1, irq_queues, flags, + &affd); } static unsigned int nvme_max_io_queues(struct nvme_dev *dev) @@ -2477,6 +2480,7 @@ static int nvme_pci_enable(struct nvme_dev *dev) { int result = -ENOMEM; struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned int flags = PCI_IRQ_ALL_TYPES; if (pci_enable_device_mem(pdev)) return result; @@ -2493,7 +2497,9 @@ static int nvme_pci_enable(struct nvme_dev *dev) * interrupts. Pre-enable a single MSIX or MSI vec for setup. We'll * adjust this later. */ - result = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (dev->ctrl.quirks & NVME_QUIRK_BROKEN_MSI) + flags &= ~PCI_IRQ_MSI; + result = pci_alloc_irq_vectors(pdev, 1, 1, flags); if (result < 0) goto disable; @@ -3390,6 +3396,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY | NVME_QUIRK_DISABLE_WRITE_ZEROES| NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x15b7, 0x5008), /* Sandisk SN530 */ + .driver_data = NVME_QUIRK_BROKEN_MSI }, { PCI_DEVICE(0x1987, 0x5012), /* Phison E12 */ .driver_data = NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x1987, 0x5016), /* Phison E16 */ diff --git a/drivers/nvme/target/auth.c b/drivers/nvme/target/auth.c index fb518b00f71f..4f08362aee8b 100644 --- a/drivers/nvme/target/auth.c +++ b/drivers/nvme/target/auth.c @@ -480,7 +480,7 @@ out_free_response: nvme_auth_free_key(transformed_key); out_free_tfm: crypto_free_shash(shash_tfm); - return 0; + return ret; } int nvmet_auth_ctrl_exponential(struct nvmet_req *req, diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c index 89a001101a7f..7fda69395c1e 100644 --- a/drivers/nvme/target/configfs.c +++ b/drivers/nvme/target/configfs.c @@ -757,10 +757,9 @@ static struct configfs_attribute *nvmet_ns_attrs[] = { bool nvmet_subsys_nsid_exists(struct nvmet_subsys *subsys, u32 nsid) { struct config_item *ns_item; - char name[4] = {}; + char name[12]; - if (sprintf(name, "%u", nsid) <= 0) - return false; + snprintf(name, sizeof(name), "%u", nsid); mutex_lock(&subsys->namespaces_group.cg_subsys->su_mutex); ns_item = config_group_find_item(&subsys->namespaces_group, name); mutex_unlock(&subsys->namespaces_group.cg_subsys->su_mutex); diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index e06013c5dace..2fde22323622 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -1686,7 +1686,8 @@ static int __init nvmet_init(void) if (!buffered_io_wq) goto out_free_zbd_work_queue; - nvmet_wq = alloc_workqueue("nvmet-wq", WQ_MEM_RECLAIM, 0); + nvmet_wq = alloc_workqueue("nvmet-wq", + WQ_MEM_RECLAIM | WQ_UNBOUND, 0); if (!nvmet_wq) goto out_free_buffered_work_queue; diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 5b8c63e74639..6e1b4140cde0 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -474,12 +474,8 @@ nvmet_rdma_alloc_rsps(struct nvmet_rdma_queue *queue) return 0; out_free: - while (--i >= 0) { - struct nvmet_rdma_rsp *rsp = &queue->rsps[i]; - - list_del(&rsp->free_list); - nvmet_rdma_free_rsp(ndev, rsp); - } + while (--i >= 0) + nvmet_rdma_free_rsp(ndev, &queue->rsps[i]); kfree(queue->rsps); out: return ret; @@ -490,12 +486,8 @@ static void nvmet_rdma_free_rsps(struct nvmet_rdma_queue *queue) struct nvmet_rdma_device *ndev = queue->dev; int i, nr_rsps = queue->recv_queue_size * 2; - for (i = 0; i < nr_rsps; i++) { - struct nvmet_rdma_rsp *rsp = &queue->rsps[i]; - - list_del(&rsp->free_list); - nvmet_rdma_free_rsp(ndev, rsp); - } + for (i = 0; i < nr_rsps; i++) + nvmet_rdma_free_rsp(ndev, &queue->rsps[i]); kfree(queue->rsps); } diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 2428d278e015..47761c7ef267 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -177,8 +177,8 @@ void pci_restore_aspm_l1ss_state(struct pci_dev *pdev) /* Restore L0s/L1 if they were enabled */ if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, clnkctl) || FIELD_GET(PCI_EXP_LNKCTL_ASPMC, plnkctl)) { - pcie_capability_write_word(parent, PCI_EXP_LNKCTL, clnkctl); - pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, plnkctl); + pcie_capability_write_word(parent, PCI_EXP_LNKCTL, plnkctl); + pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, clnkctl); } } diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index dabac9772741..2c33653ffdea 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1911,19 +1911,24 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, } } - if (err != -EEXIST) + if (err != -EEXIST) { regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs); - if (IS_ERR(regulator->debugfs)) - rdev_dbg(rdev, "Failed to create debugfs directory\n"); + if (IS_ERR(regulator->debugfs)) { + rdev_dbg(rdev, "Failed to create debugfs directory\n"); + regulator->debugfs = NULL; + } + } - debugfs_create_u32("uA_load", 0444, regulator->debugfs, - ®ulator->uA_load); - debugfs_create_u32("min_uV", 0444, regulator->debugfs, - ®ulator->voltage[PM_SUSPEND_ON].min_uV); - debugfs_create_u32("max_uV", 0444, regulator->debugfs, - ®ulator->voltage[PM_SUSPEND_ON].max_uV); - debugfs_create_file("constraint_flags", 0444, regulator->debugfs, - regulator, &constraint_flags_fops); + if (regulator->debugfs) { + debugfs_create_u32("uA_load", 0444, regulator->debugfs, + ®ulator->uA_load); + debugfs_create_u32("min_uV", 0444, regulator->debugfs, + ®ulator->voltage[PM_SUSPEND_ON].min_uV); + debugfs_create_u32("max_uV", 0444, regulator->debugfs, + ®ulator->voltage[PM_SUSPEND_ON].max_uV); + debugfs_create_file("constraint_flags", 0444, regulator->debugfs, + regulator, &constraint_flags_fops); + } /* * Check now if the regulator is an always on regulator - if diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c index 2d54844c4226..3079de41ef3f 100644 --- a/drivers/regulator/rtq2208-regulator.c +++ b/drivers/regulator/rtq2208-regulator.c @@ -48,7 +48,7 @@ /* Value */ #define RTQ2208_RAMP_VALUE_MIN_uV 500 -#define RTQ2208_RAMP_VALUE_MAX_uV 64000 +#define RTQ2208_RAMP_VALUE_MAX_uV 16000 #define RTQ2208_BUCK_MASK(uv_irq, ov_irq) (1 << ((uv_irq) % 8) | 1 << ((ov_irq) % 8)) @@ -142,12 +142,11 @@ static int rtq2208_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) * Because the relation of seleltion and value is like that * * seletion: value - * 000: 64mv - * 001: 32mv + * 010: 16mv * ... * 111: 0.5mv * - * For example, if I would like to select 64mv, the fls(ramp_delay) - 1 will be 0b111, + * For example, if I would like to select 16mv, the fls(ramp_delay) - 1 will be 0b010, * and I need to use 0b111 - sel to do the shifting */ diff --git a/drivers/spi/spi-microchip-core-qspi.c b/drivers/spi/spi-microchip-core-qspi.c index 03d125a71fd9..09f16471c537 100644 --- a/drivers/spi/spi-microchip-core-qspi.c +++ b/drivers/spi/spi-microchip-core-qspi.c @@ -283,6 +283,7 @@ static int mchp_coreqspi_setup_clock(struct mchp_coreqspi *qspi, struct spi_devi } control = readl_relaxed(qspi->regs + REG_CONTROL); + control &= ~CONTROL_CLKRATE_MASK; control |= baud_rate_val << CONTROL_CLKRATE_SHIFT; writel_relaxed(control, qspi->regs + REG_CONTROL); control = readl_relaxed(qspi->regs + REG_CONTROL); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index e4e7ddb7524a..4a68abcdcc35 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1016,10 +1016,8 @@ end_irq: static irqreturn_t stm32fx_spi_irq_thread(int irq, void *dev_id) { struct spi_controller *ctrl = dev_id; - struct stm32_spi *spi = spi_controller_get_devdata(ctrl); spi_finalize_current_transfer(ctrl); - stm32fx_spi_disable(spi); return IRQ_HANDLED; } @@ -1187,6 +1185,8 @@ static int stm32_spi_prepare_msg(struct spi_controller *ctrl, ~clrb) | setb, spi->base + spi->cfg->regs->cpol.reg); + stm32_spi_enable(spi); + spin_unlock_irqrestore(&spi->lock, flags); return 0; @@ -1204,7 +1204,6 @@ static void stm32fx_spi_dma_tx_cb(void *data) if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) { spi_finalize_current_transfer(spi->ctrl); - stm32fx_spi_disable(spi); } } @@ -1219,7 +1218,6 @@ static void stm32_spi_dma_rx_cb(void *data) struct stm32_spi *spi = data; spi_finalize_current_transfer(spi->ctrl); - spi->cfg->disable(spi); } /** @@ -1307,8 +1305,6 @@ static int stm32fx_spi_transfer_one_irq(struct stm32_spi *spi) stm32_spi_set_bits(spi, STM32FX_SPI_CR2, cr2); - stm32_spi_enable(spi); - /* starting data transfer when buffer is loaded */ if (spi->tx_buf) spi->cfg->write_tx(spi); @@ -1345,8 +1341,6 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi) spin_lock_irqsave(&spi->lock, flags); - stm32_spi_enable(spi); - /* Be sure to have data in fifo before starting data transfer */ if (spi->tx_buf) stm32h7_spi_write_txfifo(spi); @@ -1378,8 +1372,6 @@ static void stm32fx_spi_transfer_one_dma_start(struct stm32_spi *spi) */ stm32_spi_set_bits(spi, STM32FX_SPI_CR2, STM32FX_SPI_CR2_ERRIE); } - - stm32_spi_enable(spi); } /** @@ -1413,8 +1405,6 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier); - stm32_spi_enable(spi); - if (STM32_SPI_HOST_MODE(spi)) stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); } |