diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/bluetooth/hci_ldisc.c | 2 | ||||
-rw-r--r-- | drivers/input/serio/serport.c | 3 | ||||
-rw-r--r-- | drivers/net/can/slcan.c | 5 | ||||
-rw-r--r-- | drivers/net/hamradio/6pack.c | 2 | ||||
-rw-r--r-- | drivers/net/ppp/ppp_async.c | 7 | ||||
-rw-r--r-- | drivers/net/ppp/ppp_synctty.c | 7 | ||||
-rw-r--r-- | drivers/net/slip/slip.c | 5 | ||||
-rw-r--r-- | drivers/tty/moxa.c | 302 | ||||
-rw-r--r-- | drivers/tty/moxa.h | 307 | ||||
-rw-r--r-- | drivers/tty/n_gsm.c | 111 | ||||
-rw-r--r-- | drivers/tty/n_hdlc.c | 2 | ||||
-rw-r--r-- | drivers/tty/n_tty.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_fsl.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pnp.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/8250/Kconfig | 2 | ||||
-rw-r--r-- | drivers/tty/serial/uartlite.c | 91 | ||||
-rw-r--r-- | drivers/tty/tty_ioctl.c | 12 |
18 files changed, 493 insertions, 384 deletions
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 5ed2cfa7da1d..824d1c7e3e53 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -790,7 +790,7 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; } diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 7fbbe00e3553..17eb8f2aa48d 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -244,7 +244,7 @@ static int serport_ldisc_compat_ioctl(struct tty_struct *tty, } #endif -static int serport_ldisc_hangup(struct tty_struct *tty) +static void serport_ldisc_hangup(struct tty_struct *tty) { struct serport *serport = (struct serport *) tty->disc_data; unsigned long flags; @@ -254,7 +254,6 @@ static int serport_ldisc_hangup(struct tty_struct *tty) spin_unlock_irqrestore(&serport->lock, flags); wake_up_interruptible(&serport->wait); - return 0; } static void serport_ldisc_write_wakeup(struct tty_struct * tty) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index d42ec7d1bc14..9a4ebda30510 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -664,10 +664,9 @@ static void slcan_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slcan_hangup(struct tty_struct *tty) +static void slcan_hangup(struct tty_struct *tty) { slcan_close(tty); - return 0; } /* Perform I/O control on an active SLCAN channel. */ @@ -692,7 +691,7 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file, return -EINVAL; default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 6192244b304a..92d4e020456d 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -732,7 +732,7 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, break; } default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } sp_put(sp); diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 29a93d6bfe37..f4429b93a9c8 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -247,10 +247,9 @@ ppp_asynctty_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_asynctty_hangup(struct tty_struct *tty) +static void ppp_asynctty_hangup(struct tty_struct *tty) { ppp_asynctty_close(tty); - return 0; } /* @@ -311,7 +310,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_async_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -323,7 +322,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, default: /* Try the various mode ioctls */ - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } ap_put(ap); diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index af3e048695b6..b3a71b409a80 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -245,10 +245,9 @@ ppp_sync_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_sync_hangup(struct tty_struct *tty) +static void ppp_sync_hangup(struct tty_struct *tty) { ppp_sync_close(tty); - return 0; } /* @@ -304,7 +303,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_sync_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -315,7 +314,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); break; } diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 5435b5689ce6..9f3b4c1aa5ce 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -907,10 +907,9 @@ static void slip_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slip_hangup(struct tty_struct *tty) +static void slip_hangup(struct tty_struct *tty) { slip_close(tty); - return 0; } /************************************************************************ * STANDARD SLIP ENCAPSULATION * @@ -1174,7 +1173,7 @@ static int slip_ioctl(struct tty_struct *tty, struct file *file, /* VSV changes end */ #endif default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index bf17e90858b8..e37683e25055 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -45,7 +45,307 @@ #include <asm/io.h> #include <linux/uaccess.h> -#include "moxa.h" +#define MOXA 0x400 +#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ +#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ +#define MOXA_GETDATACOUNT (MOXA + 23) +#define MOXA_GET_IOQUEUE (MOXA + 27) +#define MOXA_FLUSH_QUEUE (MOXA + 28) +#define MOXA_GETMSTATUS (MOXA + 65) + +/* + * System Configuration + */ + +#define Magic_code 0x404 + +/* + * for C218 BIOS initialization + */ +#define C218_ConfBase 0x800 +#define C218_status (C218_ConfBase + 0) /* BIOS running status */ +#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ +#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ +#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ +#define C218check_sum (C218_ConfBase + 8) /* BYTE */ +#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ +#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ +#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ +#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ +#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ + +#define C218_LoadBuf 0x0F00 +#define C218_KeyCode 0x218 +#define CP204J_KeyCode 0x204 + +/* + * for C320 BIOS initialization + */ +#define C320_ConfBase 0x800 +#define C320_LoadBuf 0x0f00 +#define STS_init 0x05 /* for C320_status */ + +#define C320_status C320_ConfBase + 0 /* BIOS running status */ +#define C320_diag C320_ConfBase + 2 /* diagnostic status */ +#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ +#define C320DLoad_len C320_ConfBase + 6 /* WORD */ +#define C320check_sum C320_ConfBase + 8 /* WORD */ +#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ +#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ +#define C320UART_no C320_ConfBase + 0x0e /* WORD */ + +#define C320_KeyCode 0x320 + +#define FixPage_addr 0x0000 /* starting addr of static page */ +#define DynPage_addr 0x2000 /* starting addr of dynamic page */ +#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ +#define Control_reg 0x1ff0 /* select page and reset control */ +#define HW_reset 0x80 + +/* + * Function Codes + */ +#define FC_CardReset 0x80 +#define FC_ChannelReset 1 /* C320 firmware not supported */ +#define FC_EnableCH 2 +#define FC_DisableCH 3 +#define FC_SetParam 4 +#define FC_SetMode 5 +#define FC_SetRate 6 +#define FC_LineControl 7 +#define FC_LineStatus 8 +#define FC_XmitControl 9 +#define FC_FlushQueue 10 +#define FC_SendBreak 11 +#define FC_StopBreak 12 +#define FC_LoopbackON 13 +#define FC_LoopbackOFF 14 +#define FC_ClrIrqTable 15 +#define FC_SendXon 16 +#define FC_SetTermIrq 17 /* C320 firmware not supported */ +#define FC_SetCntIrq 18 /* C320 firmware not supported */ +#define FC_SetBreakIrq 19 +#define FC_SetLineIrq 20 +#define FC_SetFlowCtl 21 +#define FC_GenIrq 22 +#define FC_InCD180 23 +#define FC_OutCD180 24 +#define FC_InUARTreg 23 +#define FC_OutUARTreg 24 +#define FC_SetXonXoff 25 +#define FC_OutCD180CCR 26 +#define FC_ExtIQueue 27 +#define FC_ExtOQueue 28 +#define FC_ClrLineIrq 29 +#define FC_HWFlowCtl 30 +#define FC_GetClockRate 35 +#define FC_SetBaud 36 +#define FC_SetDataMode 41 +#define FC_GetCCSR 43 +#define FC_GetDataError 45 +#define FC_RxControl 50 +#define FC_ImmSend 51 +#define FC_SetXonState 52 +#define FC_SetXoffState 53 +#define FC_SetRxFIFOTrig 54 +#define FC_SetTxFIFOCnt 55 +#define FC_UnixRate 56 +#define FC_UnixResetTimer 57 + +#define RxFIFOTrig1 0 +#define RxFIFOTrig4 1 +#define RxFIFOTrig8 2 +#define RxFIFOTrig14 3 + +/* + * Dual-Ported RAM + */ +#define DRAM_global 0 +#define INT_data (DRAM_global + 0) +#define Config_base (DRAM_global + 0x108) + +#define IRQindex (INT_data + 0) +#define IRQpending (INT_data + 4) +#define IRQtable (INT_data + 8) + +/* + * Interrupt Status + */ +#define IntrRx 0x01 /* receiver data O.K. */ +#define IntrTx 0x02 /* transmit buffer empty */ +#define IntrFunc 0x04 /* function complete */ +#define IntrBreak 0x08 /* received break */ +#define IntrLine 0x10 /* line status change + for transmitter */ +#define IntrIntr 0x20 /* received INTR code */ +#define IntrQuit 0x40 /* received QUIT code */ +#define IntrEOF 0x80 /* received EOF code */ + +#define IntrRxTrigger 0x100 /* rx data count reach trigger value */ +#define IntrTxTrigger 0x200 /* tx data count below trigger value */ + +#define Magic_no (Config_base + 0) +#define Card_model_no (Config_base + 2) +#define Total_ports (Config_base + 4) +#define Module_cnt (Config_base + 8) +#define Module_no (Config_base + 10) +#define Timer_10ms (Config_base + 14) +#define Disable_IRQ (Config_base + 20) +#define TMS320_PORT1 (Config_base + 22) +#define TMS320_PORT2 (Config_base + 24) +#define TMS320_CLOCK (Config_base + 26) + +/* + * DATA BUFFER in DRAM + */ +#define Extern_table 0x400 /* Base address of the external table + (24 words * 64) total 3K bytes + (24 words * 128) total 6K bytes */ +#define Extern_size 0x60 /* 96 bytes */ +#define RXrptr 0x00 /* read pointer for RX buffer */ +#define RXwptr 0x02 /* write pointer for RX buffer */ +#define TXrptr 0x04 /* read pointer for TX buffer */ +#define TXwptr 0x06 /* write pointer for TX buffer */ +#define HostStat 0x08 /* IRQ flag and general flag */ +#define FlagStat 0x0A +#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ + /* x x x x | | | | */ + /* | | | + CTS flow */ + /* | | +--- RTS flow */ + /* | +------ TX Xon/Xoff */ + /* +--------- RX Xon/Xoff */ +#define Break_cnt 0x0E /* received break count */ +#define CD180TXirq 0x10 /* if non-0: enable TX irq */ +#define RX_mask 0x12 +#define TX_mask 0x14 +#define Ofs_rxb 0x16 +#define Ofs_txb 0x18 +#define Page_rxb 0x1A +#define Page_txb 0x1C +#define EndPage_rxb 0x1E +#define EndPage_txb 0x20 +#define Data_error 0x22 +#define RxTrigger 0x28 +#define TxTrigger 0x2a + +#define rRXwptr 0x34 +#define Low_water 0x36 + +#define FuncCode 0x40 +#define FuncArg 0x42 +#define FuncArg1 0x44 + +#define C218rx_size 0x2000 /* 8K bytes */ +#define C218tx_size 0x8000 /* 32K bytes */ + +#define C218rx_mask (C218rx_size - 1) +#define C218tx_mask (C218tx_size - 1) + +#define C320p8rx_size 0x2000 +#define C320p8tx_size 0x8000 +#define C320p8rx_mask (C320p8rx_size - 1) +#define C320p8tx_mask (C320p8tx_size - 1) + +#define C320p16rx_size 0x2000 +#define C320p16tx_size 0x4000 +#define C320p16rx_mask (C320p16rx_size - 1) +#define C320p16tx_mask (C320p16tx_size - 1) + +#define C320p24rx_size 0x2000 +#define C320p24tx_size 0x2000 +#define C320p24rx_mask (C320p24rx_size - 1) +#define C320p24tx_mask (C320p24tx_size - 1) + +#define C320p32rx_size 0x1000 +#define C320p32tx_size 0x1000 +#define C320p32rx_mask (C320p32rx_size - 1) +#define C320p32tx_mask (C320p32tx_size - 1) + +#define Page_size 0x2000U +#define Page_mask (Page_size - 1) +#define C218rx_spage 3 +#define C218tx_spage 4 +#define C218rx_pageno 1 +#define C218tx_pageno 4 +#define C218buf_pageno 5 + +#define C320p8rx_spage 3 +#define C320p8tx_spage 4 +#define C320p8rx_pgno 1 +#define C320p8tx_pgno 4 +#define C320p8buf_pgno 5 + +#define C320p16rx_spage 3 +#define C320p16tx_spage 4 +#define C320p16rx_pgno 1 +#define C320p16tx_pgno 2 +#define C320p16buf_pgno 3 + +#define C320p24rx_spage 3 +#define C320p24tx_spage 4 +#define C320p24rx_pgno 1 +#define C320p24tx_pgno 1 +#define C320p24buf_pgno 2 + +#define C320p32rx_spage 3 +#define C320p32tx_ofs C320p32rx_size +#define C320p32tx_spage 3 +#define C320p32buf_pgno 1 + +/* + * Host Status + */ +#define WakeupRx 0x01 +#define WakeupTx 0x02 +#define WakeupBreak 0x08 +#define WakeupLine 0x10 +#define WakeupIntr 0x20 +#define WakeupQuit 0x40 +#define WakeupEOF 0x80 /* used in VTIME control */ +#define WakeupRxTrigger 0x100 +#define WakeupTxTrigger 0x200 +/* + * Flag status + */ +#define Rx_over 0x01 +#define Xoff_state 0x02 +#define Tx_flowOff 0x04 +#define Tx_enable 0x08 +#define CTS_state 0x10 +#define DSR_state 0x20 +#define DCD_state 0x80 +/* + * FlowControl + */ +#define CTS_FlowCtl 1 +#define RTS_FlowCtl 2 +#define Tx_FlowCtl 4 +#define Rx_FlowCtl 8 +#define IXM_IXANY 0x10 + +#define LowWater 128 + +#define DTR_ON 1 +#define RTS_ON 2 +#define CTS_ON 1 +#define DSR_ON 2 +#define DCD_ON 8 + +/* mode definition */ +#define MX_CS8 0x03 +#define MX_CS7 0x02 +#define MX_CS6 0x01 +#define MX_CS5 0x00 + +#define MX_STOP1 0x00 +#define MX_STOP15 0x04 +#define MX_STOP2 0x08 + +#define MX_PARNONE 0x00 +#define MX_PAREVEN 0x40 +#define MX_PARODD 0xC0 +#define MX_PARMARK 0xA0 +#define MX_PARSPACE 0x20 #define MOXA_VERSION "6.0k" diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h deleted file mode 100644 index f0a4381b6861..000000000000 --- a/drivers/tty/moxa.h +++ /dev/null @@ -1,307 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef MOXA_H_FILE -#define MOXA_H_FILE - -#define MOXA 0x400 -#define MOXA_GET_IQUEUE (MOXA + 1) /* get input buffered count */ -#define MOXA_GET_OQUEUE (MOXA + 2) /* get output buffered count */ -#define MOXA_GETDATACOUNT (MOXA + 23) -#define MOXA_GET_IOQUEUE (MOXA + 27) -#define MOXA_FLUSH_QUEUE (MOXA + 28) -#define MOXA_GETMSTATUS (MOXA + 65) - -/* - * System Configuration - */ - -#define Magic_code 0x404 - -/* - * for C218 BIOS initialization - */ -#define C218_ConfBase 0x800 -#define C218_status (C218_ConfBase + 0) /* BIOS running status */ -#define C218_diag (C218_ConfBase + 2) /* diagnostic status */ -#define C218_key (C218_ConfBase + 4) /* WORD (0x218 for C218) */ -#define C218DLoad_len (C218_ConfBase + 6) /* WORD */ -#define C218check_sum (C218_ConfBase + 8) /* BYTE */ -#define C218chksum_ok (C218_ConfBase + 0x0a) /* BYTE (1:ok) */ -#define C218_TestRx (C218_ConfBase + 0x10) /* 8 bytes for 8 ports */ -#define C218_TestTx (C218_ConfBase + 0x18) /* 8 bytes for 8 ports */ -#define C218_RXerr (C218_ConfBase + 0x20) /* 8 bytes for 8 ports */ -#define C218_ErrFlag (C218_ConfBase + 0x28) /* 8 bytes for 8 ports */ - -#define C218_LoadBuf 0x0F00 -#define C218_KeyCode 0x218 -#define CP204J_KeyCode 0x204 - -/* - * for C320 BIOS initialization - */ -#define C320_ConfBase 0x800 -#define C320_LoadBuf 0x0f00 -#define STS_init 0x05 /* for C320_status */ - -#define C320_status C320_ConfBase + 0 /* BIOS running status */ -#define C320_diag C320_ConfBase + 2 /* diagnostic status */ -#define C320_key C320_ConfBase + 4 /* WORD (0320H for C320) */ -#define C320DLoad_len C320_ConfBase + 6 /* WORD */ -#define C320check_sum C320_ConfBase + 8 /* WORD */ -#define C320chksum_ok C320_ConfBase + 0x0a /* WORD (1:ok) */ -#define C320bapi_len C320_ConfBase + 0x0c /* WORD */ -#define C320UART_no C320_ConfBase + 0x0e /* WORD */ - -#define C320_KeyCode 0x320 - -#define FixPage_addr 0x0000 /* starting addr of static page */ -#define DynPage_addr 0x2000 /* starting addr of dynamic page */ -#define C218_start 0x3000 /* starting addr of C218 BIOS prg */ -#define Control_reg 0x1ff0 /* select page and reset control */ -#define HW_reset 0x80 - -/* - * Function Codes - */ -#define FC_CardReset 0x80 -#define FC_ChannelReset 1 /* C320 firmware not supported */ -#define FC_EnableCH 2 -#define FC_DisableCH 3 -#define FC_SetParam 4 -#define FC_SetMode 5 -#define FC_SetRate 6 -#define FC_LineControl 7 -#define FC_LineStatus 8 -#define FC_XmitControl 9 -#define FC_FlushQueue 10 -#define FC_SendBreak 11 -#define FC_StopBreak 12 -#define FC_LoopbackON 13 -#define FC_LoopbackOFF 14 -#define FC_ClrIrqTable 15 -#define FC_SendXon 16 -#define FC_SetTermIrq 17 /* C320 firmware not supported */ -#define FC_SetCntIrq 18 /* C320 firmware not supported */ -#define FC_SetBreakIrq 19 -#define FC_SetLineIrq 20 -#define FC_SetFlowCtl 21 -#define FC_GenIrq 22 -#define FC_InCD180 23 -#define FC_OutCD180 24 -#define FC_InUARTreg 23 -#define FC_OutUARTreg 24 -#define FC_SetXonXoff 25 -#define FC_OutCD180CCR 26 -#define FC_ExtIQueue 27 -#define FC_ExtOQueue 28 -#define FC_ClrLineIrq 29 -#define FC_HWFlowCtl 30 -#define FC_GetClockRate 35 -#define FC_SetBaud 36 -#define FC_SetDataMode 41 -#define FC_GetCCSR 43 -#define FC_GetDataError 45 -#define FC_RxControl 50 -#define FC_ImmSend 51 -#define FC_SetXonState 52 -#define FC_SetXoffState 53 -#define FC_SetRxFIFOTrig 54 -#define FC_SetTxFIFOCnt 55 -#define FC_UnixRate 56 -#define FC_UnixResetTimer 57 - -#define RxFIFOTrig1 0 -#define RxFIFOTrig4 1 -#define RxFIFOTrig8 2 -#define RxFIFOTrig14 3 - -/* - * Dual-Ported RAM - */ -#define DRAM_global 0 -#define INT_data (DRAM_global + 0) -#define Config_base (DRAM_global + 0x108) - -#define IRQindex (INT_data + 0) -#define IRQpending (INT_data + 4) -#define IRQtable (INT_data + 8) - -/* - * Interrupt Status - */ -#define IntrRx 0x01 /* receiver data O.K. */ -#define IntrTx 0x02 /* transmit buffer empty */ -#define IntrFunc 0x04 /* function complete */ -#define IntrBreak 0x08 /* received break */ -#define IntrLine 0x10 /* line status change - for transmitter */ -#define IntrIntr 0x20 /* received INTR code */ -#define IntrQuit 0x40 /* received QUIT code */ -#define IntrEOF 0x80 /* received EOF code */ - -#define IntrRxTrigger 0x100 /* rx data count reach trigger value */ -#define IntrTxTrigger 0x200 /* tx data count below trigger value */ - -#define Magic_no (Config_base + 0) -#define Card_model_no (Config_base + 2) -#define Total_ports (Config_base + 4) -#define Module_cnt (Config_base + 8) -#define Module_no (Config_base + 10) -#define Timer_10ms (Config_base + 14) -#define Disable_IRQ (Config_base + 20) -#define TMS320_PORT1 (Config_base + 22) -#define TMS320_PORT2 (Config_base + 24) -#define TMS320_CLOCK (Config_base + 26) - -/* - * DATA BUFFER in DRAM - */ -#define Extern_table 0x400 /* Base address of the external table - (24 words * 64) total 3K bytes - (24 words * 128) total 6K bytes */ -#define Extern_size 0x60 /* 96 bytes */ -#define RXrptr 0x00 /* read pointer for RX buffer */ -#define RXwptr 0x02 /* write pointer for RX buffer */ -#define TXrptr 0x04 /* read pointer for TX buffer */ -#define TXwptr 0x06 /* write pointer for TX buffer */ -#define HostStat 0x08 /* IRQ flag and general flag */ -#define FlagStat 0x0A -#define FlowControl 0x0C /* B7 B6 B5 B4 B3 B2 B1 B0 */ - /* x x x x | | | | */ - /* | | | + CTS flow */ - /* | | +--- RTS flow */ - /* | +------ TX Xon/Xoff */ - /* +--------- RX Xon/Xoff */ -#define Break_cnt 0x0E /* received break count */ -#define CD180TXirq 0x10 /* if non-0: enable TX irq */ -#define RX_mask 0x12 -#define TX_mask 0x14 -#define Ofs_rxb 0x16 -#define Ofs_txb 0x18 -#define Page_rxb 0x1A -#define Page_txb 0x1C -#define EndPage_rxb 0x1E -#define EndPage_txb 0x20 -#define Data_error 0x22 -#define RxTrigger 0x28 -#define TxTrigger 0x2a - -#define rRXwptr 0x34 -#define Low_water 0x36 - -#define FuncCode 0x40 -#define FuncArg 0x42 -#define FuncArg1 0x44 - -#define C218rx_size 0x2000 /* 8K bytes */ -#define C218tx_size 0x8000 /* 32K bytes */ - -#define C218rx_mask (C218rx_size - 1) -#define C218tx_mask (C218tx_size - 1) - -#define C320p8rx_size 0x2000 -#define C320p8tx_size 0x8000 -#define C320p8rx_mask (C320p8rx_size - 1) -#define C320p8tx_mask (C320p8tx_size - 1) - -#define C320p16rx_size 0x2000 -#define C320p16tx_size 0x4000 -#define C320p16rx_mask (C320p16rx_size - 1) -#define C320p16tx_mask (C320p16tx_size - 1) - -#define C320p24rx_size 0x2000 -#define C320p24tx_size 0x2000 -#define C320p24rx_mask (C320p24rx_size - 1) -#define C320p24tx_mask (C320p24tx_size - 1) - -#define C320p32rx_size 0x1000 -#define C320p32tx_size 0x1000 -#define C320p32rx_mask (C320p32rx_size - 1) -#define C320p32tx_mask (C320p32tx_size - 1) - -#define Page_size 0x2000U -#define Page_mask (Page_size - 1) -#define C218rx_spage 3 -#define C218tx_spage 4 -#define C218rx_pageno 1 -#define C218tx_pageno 4 -#define C218buf_pageno 5 - -#define C320p8rx_spage 3 -#define C320p8tx_spage 4 -#define C320p8rx_pgno 1 -#define C320p8tx_pgno 4 -#define C320p8buf_pgno 5 - -#define C320p16rx_spage 3 -#define C320p16tx_spage 4 -#define C320p16rx_pgno 1 -#define C320p16tx_pgno 2 -#define C320p16buf_pgno 3 - -#define C320p24rx_spage 3 -#define C320p24tx_spage 4 -#define C320p24rx_pgno 1 -#define C320p24tx_pgno 1 -#define C320p24buf_pgno 2 - -#define C320p32rx_spage 3 -#define C320p32tx_ofs C320p32rx_size -#define C320p32tx_spage 3 -#define C320p32buf_pgno 1 - -/* - * Host Status - */ -#define WakeupRx 0x01 -#define WakeupTx 0x02 -#define WakeupBreak 0x08 -#define WakeupLine 0x10 -#define WakeupIntr 0x20 -#define WakeupQuit 0x40 -#define WakeupEOF 0x80 /* used in VTIME control */ -#define WakeupRxTrigger 0x100 -#define WakeupTxTrigger 0x200 -/* - * Flag status - */ -#define Rx_over 0x01 -#define Xoff_state 0x02 -#define Tx_flowOff 0x04 -#define Tx_enable 0x08 -#define CTS_state 0x10 -#define DSR_state 0x20 -#define DCD_state 0x80 -/* - * FlowControl - */ -#define CTS_FlowCtl 1 -#define RTS_FlowCtl 2 -#define Tx_FlowCtl 4 -#define Rx_FlowCtl 8 -#define IXM_IXANY 0x10 - -#define LowWater 128 - -#define DTR_ON 1 -#define RTS_ON 2 -#define CTS_ON 1 -#define DSR_ON 2 -#define DCD_ON 8 - -/* mode definition */ -#define MX_CS8 0x03 -#define MX_CS7 0x02 -#define MX_CS6 0x01 -#define MX_CS5 0x00 - -#define MX_STOP1 0x00 -#define MX_STOP15 0x04 -#define MX_STOP2 0x08 - -#define MX_PARNONE 0x00 -#define MX_PAREVEN 0x40 -#define MX_PARODD 0xC0 -#define MX_PARMARK 0xA0 -#define MX_PARSPACE 0x20 - -#endif diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 1d92d2a84889..c98a04595084 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -271,6 +271,10 @@ static DEFINE_SPINLOCK(gsm_mux_lock); static struct tty_driver *gsm_tty_driver; +/* Save dlci open address */ +static int addr_open[256] = { 0 }; +/* Save dlci open count */ +static int addr_cnt; /* * This section of the driver logic implements the GSM encodings * both the basic and the 'advanced'. Reliable transport is not @@ -587,6 +591,10 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) return; } gsmld_output(gsm, cbuf, len); + if (!gsm->initiator) { + cr = cr & gsm->initiator; + control = control & ~PF; + } gsm_print_packet("-->", addr, cr, control, NULL, 0); } @@ -601,7 +609,7 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control) static inline void gsm_response(struct gsm_mux *gsm, int addr, int control) { - gsm_send(gsm, addr, 0, control); + gsm_send(gsm, addr, 1, control); } /** @@ -1177,6 +1185,7 @@ static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen) } static void gsm_dlci_begin_close(struct gsm_dlci *dlci); +static void gsm_dlci_close(struct gsm_dlci *dlci); /** * gsm_control_message - DLCI 0 control processing @@ -1195,15 +1204,28 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, { u8 buf[1]; unsigned long flags; + struct gsm_dlci *dlci; + int i; + int address; switch (command) { case CMD_CLD: { - struct gsm_dlci *dlci = gsm->dlci[0]; + if (addr_cnt > 0) { + for (i = 0; i < addr_cnt; i++) { + address = addr_open[i]; + dlci = gsm->dlci[address]; + gsm_dlci_close(dlci); + addr_open[i] = 0; + } + } /* Modem wishes to close down */ + dlci = gsm->dlci[0]; if (dlci) { dlci->dead = true; gsm->dead = true; - gsm_dlci_begin_close(dlci); + gsm_dlci_close(dlci); + addr_cnt = 0; + gsm_response(gsm, 0, UA|PF); } } break; @@ -1429,6 +1451,8 @@ static void gsm_dlci_close(struct gsm_dlci *dlci) kfifo_reset(&dlci->fifo); } else dlci->gsm->dead = true; + /* Unregister gsmtty driver,report gsmtty dev remove uevent for user */ + tty_unregister_device(gsm_tty_driver, dlci->addr); wake_up(&dlci->gsm->event); /* A DLCI 0 close is a MUX termination so we need to kick that back to userspace somehow */ @@ -1450,6 +1474,8 @@ static void gsm_dlci_open(struct gsm_dlci *dlci) dlci->state = DLCI_OPEN; if (debug & 8) pr_debug("DLCI %d goes open.\n", dlci->addr); + /* Register gsmtty driver,report gsmtty dev add uevent for user */ + tty_register_device(gsm_tty_driver, dlci->addr, NULL); wake_up(&dlci->gsm->event); } @@ -1748,6 +1774,7 @@ static void gsm_queue(struct gsm_mux *gsm) struct gsm_dlci *dlci; u8 cr; int address; + int i, j, k, address_tmp; /* We have to sneak a look at the packet body to do the FCS. A somewhat layering violation in the spec */ @@ -1779,29 +1806,59 @@ static void gsm_queue(struct gsm_mux *gsm) switch (gsm->control) { case SABM|PF: - if (cr == 0) + if (cr == 1) goto invalid; if (dlci == NULL) dlci = gsm_dlci_alloc(gsm, address); if (dlci == NULL) return; if (dlci->dead) - gsm_response(gsm, address, DM); + gsm_response(gsm, address, DM|PF); else { - gsm_response(gsm, address, UA); + gsm_response(gsm, address, UA|PF); gsm_dlci_open(dlci); + /* Save dlci open address */ + if (address) { + addr_open[addr_cnt] = address; + addr_cnt++; + } } break; case DISC|PF: - if (cr == 0) + if (cr == 1) goto invalid; if (dlci == NULL || dlci->state == DLCI_CLOSED) { - gsm_response(gsm, address, DM); + gsm_response(gsm, address, DM|PF); return; } /* Real close complete */ - gsm_response(gsm, address, UA); - gsm_dlci_close(dlci); + if (!address) { + if (addr_cnt > 0) { + for (i = 0; i < addr_cnt; i++) { + address = addr_open[i]; + dlci = gsm->dlci[address]; + gsm_dlci_close(dlci); + addr_open[i] = 0; + } + } + dlci = gsm->dlci[0]; + gsm_dlci_close(dlci); + addr_cnt = 0; + gsm_response(gsm, 0, UA|PF); + } else { + gsm_response(gsm, address, UA|PF); + gsm_dlci_close(dlci); + /* clear dlci address */ + for (j = 0; j < addr_cnt; j++) { + address_tmp = addr_open[j]; + if (address_tmp == address) { + for (k = j; k < addr_cnt; k++) + addr_open[k] = addr_open[k+1]; + addr_cnt--; + break; + } + } + } break; case UA: case UA|PF: @@ -2300,7 +2357,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) * configuration */ - if (need_close || need_restart) { + if (gsm->initiator && (need_close || need_restart)) { int ret; ret = gsm_disconnect(gsm); @@ -2384,17 +2441,19 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) else { /* Don't register device 0 - this is the control channel and not a usable tty interface */ - base = mux_num_to_base(gsm); /* Base for this MUX */ - for (i = 1; i < NUM_DLCI; i++) { - struct device *dev; + if (gsm->initiator) { + base = mux_num_to_base(gsm); /* Base for this MUX */ + for (i = 1; i < NUM_DLCI; i++) { + struct device *dev; - dev = tty_register_device(gsm_tty_driver, + dev = tty_register_device(gsm_tty_driver, base + i, NULL); - if (IS_ERR(dev)) { - for (i--; i >= 1; i--) - tty_unregister_device(gsm_tty_driver, - base + i); - return PTR_ERR(dev); + if (IS_ERR(dev)) { + for (i--; i >= 1; i--) + tty_unregister_device(gsm_tty_driver, + base + i); + return PTR_ERR(dev); + } } } } @@ -2416,8 +2475,10 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) int i; WARN_ON(tty != gsm->tty); - for (i = 1; i < NUM_DLCI; i++) - tty_unregister_device(gsm_tty_driver, base + i); + if (gsm->initiator) { + for (i = 1; i < NUM_DLCI; i++) + tty_unregister_device(gsm_tty_driver, base + i); + } gsm_cleanup_mux(gsm); tty_kref_put(gsm->tty); gsm->tty = NULL; @@ -2651,7 +2712,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file, base = mux_num_to_base(gsm); return put_user(base + 1, (__u32 __user *)arg); default: - return n_tty_ioctl_helper(tty, file, cmd, arg); + return n_tty_ioctl_helper(tty, cmd, arg); } } @@ -3000,6 +3061,7 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) { struct gsm_dlci *dlci = tty->driver_data; struct tty_port *port = &dlci->port; + struct gsm_mux *gsm = dlci->gsm; port->count++; tty_port_tty_set(port, tty); @@ -3009,7 +3071,8 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp) a DM straight back. This is ok as that will have caused a hangup */ tty_port_set_initialized(port, 1); /* Start sending off SABM messages */ - gsm_dlci_begin_open(dlci); + if (gsm->initiator) + gsm_dlci_begin_open(dlci); /* And wait for virtual carrier */ return tty_port_block_til_ready(port, tty, filp); } diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 580a37b3fe1b..7e0884ecc74f 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -630,7 +630,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, fallthrough; /* to default */ default: - error = n_tty_ioctl_helper(tty, file, cmd, arg); + error = n_tty_ioctl_helper(tty, cmd, arg); break; } return error; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0ec93f1a61f5..5be6d02dc690 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2418,7 +2418,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file, up_write(&tty->termios_rwsem); return put_user(retval, (unsigned int __user *) arg); default: - return n_tty_ioctl_helper(tty, file, cmd, arg); + return n_tty_ioctl_helper(tty, cmd, arg); } } @@ -2450,7 +2450,6 @@ void n_tty_inherit_ops(struct tty_ldisc_ops *ops) { *ops = n_tty_ops; ops->owner = NULL; - ops->flags = 0; } EXPORT_SYMBOL_GPL(n_tty_inherit_ops); diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index fc65a2293ce9..9c01c531349d 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -23,10 +23,6 @@ #include "8250.h" -struct fsl8250_data { - int line; -}; - int fsl8250_handle_irq(struct uart_port *port) { unsigned char lsr, orig_lsr; @@ -90,6 +86,10 @@ int fsl8250_handle_irq(struct uart_port *port) EXPORT_SYMBOL_GPL(fsl8250_handle_irq); #ifdef CONFIG_ACPI +struct fsl8250_data { + int line; +}; + static int fsl8250_acpi_probe(struct platform_device *pdev) { struct fsl8250_data *data; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 726912b16a55..93159557a2fb 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3981,9 +3981,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) nr_ports = rc; } - priv = kzalloc(sizeof(struct serial_private) + - sizeof(unsigned int) * nr_ports, - GFP_KERNEL); + priv = kzalloc(struct_size(priv, line, nr_ports), GFP_KERNEL); if (!priv) { priv = ERR_PTR(-ENOMEM); goto err_deinit; diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 98e5ee4d0d08..1974bbadc975 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -56,10 +56,6 @@ static const struct pnp_device_id pnp_dev_table[] = { { "BRI1400", 0 }, /* Boca 33.6 Kbps Internal FD34FSVD */ { "BRI3400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI0A49", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, /* Computer Peripherals Inc */ /* EuroViVa CommCenter-33.6 SP PnP */ { "CPI4050", 0 }, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 71ae16de0f90..808268edd2e8 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -376,7 +376,7 @@ config SERIAL_8250_DW config SERIAL_8250_EM tristate "Support for Emma Mobile integrated serial port" depends on SERIAL_8250 && HAVE_CLK - depends on ARM || COMPILE_TEST + depends on (ARM && ARCH_RENESAS) || COMPILE_TEST help Selecting this option will add support for the integrated serial port hardware found on the Emma Mobile line of processors. diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index dfc1ba4e1572..d3d9566e5dbd 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -8,6 +8,7 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/bitfield.h> #include <linux/console.h> #include <linux/serial.h> #include <linux/serial_core.h> @@ -63,9 +64,18 @@ static struct uart_port *console_port; #endif +/** + * struct uartlite_data: Driver private data + * reg_ops: Functions to read/write registers + * clk: Our parent clock, if present + * baud: The baud rate configured when this device was synthesized + * cflags: The cflags for parity and data bits + */ struct uartlite_data { const struct uartlite_reg_ops *reg_ops; struct clk *clk; + unsigned int baud; + tcflag_t cflags; }; struct uartlite_reg_ops { @@ -119,6 +129,8 @@ static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) static struct uart_port ulite_ports[ULITE_NR_UARTS]; +static struct uart_driver ulite_uart_driver; + /* --------------------------------------------------------------------- * Core UART driver operations */ @@ -306,7 +318,12 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { unsigned long flags; - unsigned int baud; + struct uartlite_data *pdata = port->private_data; + + /* Set termios to what the hardware supports */ + termios->c_cflag &= ~(BRKINT | CSTOPB | PARENB | PARODD | CSIZE); + termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE); + tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud); spin_lock_irqsave(&port->lock, flags); @@ -329,8 +346,7 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; /* update timeout */ - baud = uart_get_baud_rate(port, termios, old, 0, 460800); - uart_update_timeout(port, termios->c_cflag, baud); + uart_update_timeout(port, termios->c_cflag, pdata->baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -532,8 +548,6 @@ static int ulite_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -static struct uart_driver ulite_uart_driver; - static struct console ulite_console = { .name = ULITE_NAME, .write = ulite_console_write, @@ -765,18 +779,73 @@ static int ulite_probe(struct platform_device *pdev) struct uartlite_data *pdata; int irq, ret; int id = pdev->id; -#ifdef CONFIG_OF - const __be32 *prop; - prop = of_get_property(pdev->dev.of_node, "port-number", NULL); - if (prop) - id = be32_to_cpup(prop); -#endif pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data), GFP_KERNEL); if (!pdata) return -ENOMEM; + if (IS_ENABLED(CONFIG_OF)) { + const char *prop; + struct device_node *np = pdev->dev.of_node; + u32 val = 0; + + prop = "port-number"; + ret = of_property_read_u32(np, prop, &id); + if (ret && ret != -EINVAL) +of_err: + return dev_err_probe(&pdev->dev, ret, + "could not read %s\n", prop); + + prop = "current-speed"; + ret = of_property_read_u32(np, prop, &pdata->baud); + if (ret) + goto of_err; + + prop = "xlnx,use-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + if (val) { + prop = "xlnx,odd-parity"; + ret = of_property_read_u32(np, prop, &val); + if (ret) + goto of_err; + + if (val) + pdata->cflags |= PARODD; + pdata->cflags |= PARENB; + } + + val = 8; + prop = "xlnx,data-bits"; + ret = of_property_read_u32(np, prop, &val); + if (ret && ret != -EINVAL) + goto of_err; + + switch (val) { + case 5: + pdata->cflags |= CS5; + break; + case 6: + pdata->cflags |= CS6; + break; + case 7: + pdata->cflags |= CS7; + break; + case 8: + pdata->cflags |= CS8; + break; + default: + return dev_err_probe(&pdev->dev, -EINVAL, + "bad data bits %d\n", val); + } + } else { + pdata->baud = 9600; + pdata->cflags = CS8; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 507a25d692bb..63181925ec1a 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -675,7 +675,6 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) /** * tty_mode_ioctl - mode related ioctls * @tty: tty for the ioctl - * @file: file pointer for the tty * @cmd: command * @arg: ioctl argument * @@ -684,16 +683,13 @@ static int tty_change_softcar(struct tty_struct *tty, int arg) * consistent mode setting. */ -int tty_mode_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct tty_struct *real_tty; void __user *p = (void __user *)arg; int ret = 0; struct ktermios kterm; - BUG_ON(file == NULL); - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) real_tty = tty->link; @@ -858,8 +854,8 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg) } EXPORT_SYMBOL_GPL(tty_perform_flush); -int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) +int n_tty_ioctl_helper(struct tty_struct *tty, unsigned int cmd, + unsigned long arg) { int retval; @@ -904,7 +900,7 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, return __tty_perform_flush(tty, arg); default: /* Try the mode commands */ - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } EXPORT_SYMBOL(n_tty_ioctl_helper); |