summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/char/hw_random/Kconfig2
-rw-r--r--drivers/clk/bcm/Kconfig4
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/mfd/bcm2835-pm.c74
-rw-r--r--drivers/phy/broadcom/Kconfig2
-rw-r--r--drivers/soc/bcm/bcm2835-power.c72
-rw-r--r--drivers/soc/bcm/brcmstb/biuctrl.c9
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-arm.c2
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/tty/serial/Kconfig4
11 files changed, 118 insertions, 57 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index bb45a9c00514..1c9f4fb2595d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -148,7 +148,7 @@ config SATA_AHCI_PLATFORM
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index b3f2d55dc551..3da8e85f8aae 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -87,7 +87,7 @@ config HW_RANDOM_BA431
config HW_RANDOM_BCM2835
tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
- ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index ec738f74a026..77266afb1c79 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -22,9 +22,9 @@ config CLK_BCM2835
config CLK_BCM_63XX
bool "Broadcom BCM63xx clock support"
- depends on ARCH_BCM_63XX || COMPILE_TEST
+ depends on ARCH_BCMBCA || COMPILE_TEST
select COMMON_CLK_IPROC
- default ARCH_BCM_63XX
+ default ARCH_BCMBCA
help
Enable common clock framework support for Broadcom BCM63xx DSL SoCs
based on the ARM architecture
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a1bae59208e3..708a67c7faaa 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -486,7 +486,7 @@ config I2C_BCM_KONA
config I2C_BRCMSTB
tristate "BRCM Settop/DSL I2C controller"
- depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+ depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
default y
help
diff --git a/drivers/mfd/bcm2835-pm.c b/drivers/mfd/bcm2835-pm.c
index 42fe67f1538e..49cd1f03884a 100644
--- a/drivers/mfd/bcm2835-pm.c
+++ b/drivers/mfd/bcm2835-pm.c
@@ -25,9 +25,52 @@ static const struct mfd_cell bcm2835_power_devs[] = {
{ .name = "bcm2835-power" },
};
+static int bcm2835_pm_get_pdata(struct platform_device *pdev,
+ struct bcm2835_pm *pm)
+{
+ if (of_find_property(pm->dev->of_node, "reg-names", NULL)) {
+ struct resource *res;
+
+ pm->base = devm_platform_ioremap_resource_byname(pdev, "pm");
+ if (IS_ERR(pm->base))
+ return PTR_ERR(pm->base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "asb");
+ if (res) {
+ pm->asb = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pm->asb))
+ pm->asb = NULL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "rpivid_asb");
+ if (res) {
+ pm->rpivid_asb = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pm->rpivid_asb))
+ pm->rpivid_asb = NULL;
+ }
+
+ return 0;
+ }
+
+ /* If no 'reg-names' property is found we can assume we're using old DTB. */
+ pm->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pm->base))
+ return PTR_ERR(pm->base);
+
+ pm->asb = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(pm->asb))
+ pm->asb = NULL;
+
+ pm->rpivid_asb = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(pm->rpivid_asb))
+ pm->rpivid_asb = NULL;
+
+ return 0;
+}
+
static int bcm2835_pm_probe(struct platform_device *pdev)
{
- struct resource *res;
struct device *dev = &pdev->dev;
struct bcm2835_pm *pm;
int ret;
@@ -39,10 +82,9 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
pm->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pm->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(pm->base))
- return PTR_ERR(pm->base);
+ ret = bcm2835_pm_get_pdata(pdev, pm);
+ if (ret)
+ return ret;
ret = devm_mfd_add_devices(dev, -1,
bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
@@ -50,30 +92,22 @@ static int bcm2835_pm_probe(struct platform_device *pdev)
if (ret)
return ret;
- /* We'll use the presence of the AXI ASB regs in the
+ /*
+ * We'll use the presence of the AXI ASB regs in the
* bcm2835-pm binding as the key for whether we can reference
* the full PM register range and support power domains.
*/
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (res) {
- pm->asb = devm_ioremap_resource(dev, res);
- if (IS_ERR(pm->asb))
- return PTR_ERR(pm->asb);
-
- ret = devm_mfd_add_devices(dev, -1,
- bcm2835_power_devs,
- ARRAY_SIZE(bcm2835_power_devs),
- NULL, 0, NULL);
- if (ret)
- return ret;
- }
-
+ if (pm->asb)
+ return devm_mfd_add_devices(dev, -1, bcm2835_power_devs,
+ ARRAY_SIZE(bcm2835_power_devs),
+ NULL, 0, NULL);
return 0;
}
static const struct of_device_id bcm2835_pm_of_match[] = {
{ .compatible = "brcm,bcm2835-pm-wdt", },
{ .compatible = "brcm,bcm2835-pm", },
+ { .compatible = "brcm,bcm2711-pm", },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 849c4204f550..93a6a8ee4716 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -83,7 +83,7 @@ config PHY_NS2_USB_DRD
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
depends on OF
select GENERIC_PHY
default ARCH_BCM_IPROC
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 1e0041ec8132..5bcd047768b6 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,8 +126,7 @@
#define ASB_AXI_BRDG_ID 0x20
-#define ASB_READ(reg) readl(power->asb + (reg))
-#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
+#define BCM2835_BRDG_ID 0x62726467
struct bcm2835_power_domain {
struct generic_pm_domain base;
@@ -142,24 +141,41 @@ struct bcm2835_power {
void __iomem *base;
/* AXI Async bridge registers. */
void __iomem *asb;
+ /* RPiVid bridge registers. */
+ void __iomem *rpivid_asb;
struct genpd_onecell_data pd_xlate;
struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
struct reset_controller_dev reset;
};
-static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
{
+ void __iomem *base = power->asb;
u64 start;
+ u32 val;
- if (!reg)
+ switch (reg) {
+ case 0:
return 0;
+ case ASB_V3D_S_CTRL:
+ case ASB_V3D_M_CTRL:
+ if (power->rpivid_asb)
+ base = power->rpivid_asb;
+ break;
+ }
start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
- ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
- while (ASB_READ(reg) & ASB_ACK) {
+ if (enable) {
+ val = readl(base + reg) & ~ASB_REQ_STOP;
+ } else {
+ val = readl(base + reg) | ASB_REQ_STOP;
+ }
+ writel(PM_PASSWORD | val, base + reg);
+
+ while (readl(base + reg) & ASB_ACK) {
cpu_relax();
if (ktime_get_ns() - start >= 1000)
return -ETIMEDOUT;
@@ -168,30 +184,24 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
return 0;
}
-static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
{
- u64 start;
-
- if (!reg)
- return 0;
-
- start = ktime_get_ns();
-
- /* Enable the module's async AXI bridges. */
- ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
- while (!(ASB_READ(reg) & ASB_ACK)) {
- cpu_relax();
- if (ktime_get_ns() - start >= 1000)
- return -ETIMEDOUT;
- }
+ return bcm2835_asb_control(power, reg, true);
+}
- return 0;
+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+{
+ return bcm2835_asb_control(power, reg, false);
}
static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
{
struct bcm2835_power *power = pd->power;
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
/* Enable functional isolation */
PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
@@ -213,6 +223,10 @@ static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
int inrush;
bool powok;
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
/* If it was already powered on by the fw, leave it that way. */
if (PM_READ(pm_reg) & PM_POWUP)
return 0;
@@ -626,13 +640,23 @@ static int bcm2835_power_probe(struct platform_device *pdev)
power->dev = dev;
power->base = pm->base;
power->asb = pm->asb;
+ power->rpivid_asb = pm->rpivid_asb;
- id = ASB_READ(ASB_AXI_BRDG_ID);
- if (id != 0x62726467 /* "BRDG" */) {
+ id = readl(power->asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
dev_err(dev, "ASB register ID returned 0x%08x\n", id);
return -ENODEV;
}
+ if (power->rpivid_asb) {
+ id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+ dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+ id);
+ return -ENODEV;
+ }
+ }
+
power->pd_xlate.domains = devm_kcalloc(dev,
ARRAY_SIZE(power_domain_names),
sizeof(*power->pd_xlate.domains),
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 2c975d79fe8e..1467bbd59690 100644
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -340,12 +340,12 @@ static int __init brcmstb_biuctrl_init(void)
ret = setup_hifcpubiuctrl_regs(np);
if (ret)
- return ret;
+ goto out_put;
ret = mcp_write_pairing_set();
if (ret) {
pr_err("MCP: Unable to disable write pairing!\n");
- return ret;
+ goto out_put;
}
a72_b53_rac_enable_all(np);
@@ -353,6 +353,9 @@ static int __init brcmstb_biuctrl_init(void)
#ifdef CONFIG_PM_SLEEP
register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
#endif
- return 0;
+ ret = 0;
+out_put:
+ of_node_put(np);
+ return ret;
}
early_initcall(brcmstb_biuctrl_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
index 70ad0f3dce28..d6b30d521307 100644
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -721,7 +721,7 @@ static int brcmstb_pm_probe(struct platform_device *pdev)
ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs;
ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs;
/*
- * Slightly grosss to use the phy ver to get a memc,
+ * Slightly gross to use the phy ver to get a memc,
* offset but that is the only versioned things so far
* we can test for.
*/
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3b1044ebc400..35ce57878b27 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -183,7 +183,7 @@ config SPI_BCM63XX
config SPI_BCM63XX_HSSPI
tristate "Broadcom BCM63XX HS SPI controller driver"
- depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
+ depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST
help
This enables support for the High Speed SPI controller present on
newer Broadcom BCM63XX SoCs.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a452748c69b2..7172cd1792df 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1099,8 +1099,8 @@ config SERIAL_TIMBERDALE
config SERIAL_BCM63XX
tristate "Broadcom BCM63xx/BCM33xx UART support"
select SERIAL_CORE
- depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
- default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
+ depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
help
This enables the driver for the onchip UART core found on
the following chipsets: