diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/rtc/Kconfig | 11 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-ti-k3.c | 680 |
3 files changed, 692 insertions, 0 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 68859970b4d5..443b6d925335 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1929,6 +1929,17 @@ config RTC_DRV_ASPEED This driver can also be built as a module, if so, the module will be called "rtc-aspeed". +config RTC_DRV_TI_K3 + tristate "TI K3 RTC" + depends on ARCH_K3 || COMPILE_TEST + select REGMAP_MMIO + help + If you say yes here you get support for the Texas Instruments's + Real Time Clock for K3 architecture. + + This driver can also be built as a module, if so, the module + will be called "rtc-ti-k3". + comment "HID Sensor RTC drivers" config RTC_DRV_HID_SENSOR_TIME diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 35386b1c1e56..f83cd5ea9b11 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -173,6 +173,7 @@ obj-$(CONFIG_RTC_DRV_SUNPLUS) += rtc-sunplus.o obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o +obj-$(CONFIG_RTC_DRV_TI_K3) += rtc-ti-k3.o obj-$(CONFIG_RTC_DRV_TPS6586X) += rtc-tps6586x.o obj-$(CONFIG_RTC_DRV_TPS65910) += rtc-tps65910.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o diff --git a/drivers/rtc/rtc-ti-k3.c b/drivers/rtc/rtc-ti-k3.c new file mode 100644 index 000000000000..7a0f181d3fef --- /dev/null +++ b/drivers/rtc/rtc-ti-k3.c @@ -0,0 +1,680 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Texas Instruments K3 RTC driver + * + * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/rtc.h> + +/* Registers */ +#define REG_K3RTC_S_CNT_LSW 0x08 +#define REG_K3RTC_S_CNT_MSW 0x0c +#define REG_K3RTC_COMP 0x10 +#define REG_K3RTC_ON_OFF_S_CNT_LSW 0x20 +#define REG_K3RTC_ON_OFF_S_CNT_MSW 0x24 +#define REG_K3RTC_SCRATCH0 0x30 +#define REG_K3RTC_SCRATCH7 0x4c +#define REG_K3RTC_GENERAL_CTL 0x50 +#define REG_K3RTC_IRQSTATUS_RAW_SYS 0x54 +#define REG_K3RTC_IRQSTATUS_SYS 0x58 +#define REG_K3RTC_IRQENABLE_SET_SYS 0x5c +#define REG_K3RTC_IRQENABLE_CLR_SYS 0x60 +#define REG_K3RTC_SYNCPEND 0x68 +#define REG_K3RTC_KICK0 0x70 +#define REG_K3RTC_KICK1 0x74 + +/* Freeze when lsw is read and unfreeze when msw is read */ +#define K3RTC_CNT_FMODE_S_CNT_VALUE (0x2 << 24) + +/* Magic values for lock/unlock */ +#define K3RTC_KICK0_UNLOCK_VALUE 0x83e70b13 +#define K3RTC_KICK1_UNLOCK_VALUE 0x95a4f1e0 + +/* Multiplier for ppb conversions */ +#define K3RTC_PPB_MULT (1000000000LL) +/* Min and max values supported with 'offset' interface (swapped sign) */ +#define K3RTC_MIN_OFFSET (-277761) +#define K3RTC_MAX_OFFSET (277778) + +/** + * struct ti_k3_rtc_soc_data - Private of compatible data for ti-k3-rtc + * @unlock_irq_erratum: Has erratum for unlock infinite IRQs (erratum i2327) + */ +struct ti_k3_rtc_soc_data { + const bool unlock_irq_erratum; +}; + +static const struct regmap_config ti_k3_rtc_regmap_config = { + .name = "peripheral-registers", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = REG_K3RTC_KICK1, +}; + +enum ti_k3_rtc_fields { + K3RTC_KICK0, + K3RTC_KICK1, + K3RTC_S_CNT_LSW, + K3RTC_S_CNT_MSW, + K3RTC_O32K_OSC_DEP_EN, + K3RTC_UNLOCK, + K3RTC_CNT_FMODE, + K3RTC_PEND, + K3RTC_RELOAD_FROM_BBD, + K3RTC_COMP, + + K3RTC_ALM_S_CNT_LSW, + K3RTC_ALM_S_CNT_MSW, + K3RTC_IRQ_STATUS_RAW, + K3RTC_IRQ_STATUS, + K3RTC_IRQ_ENABLE_SET, + K3RTC_IRQ_ENABLE_CLR, + + K3RTC_IRQ_STATUS_ALT, + K3RTC_IRQ_ENABLE_CLR_ALT, + + K3_RTC_MAX_FIELDS +}; + +static const struct reg_field ti_rtc_reg_fields[] = { + [K3RTC_KICK0] = REG_FIELD(REG_K3RTC_KICK0, 0, 31), + [K3RTC_KICK1] = REG_FIELD(REG_K3RTC_KICK1, 0, 31), + [K3RTC_S_CNT_LSW] = REG_FIELD(REG_K3RTC_S_CNT_LSW, 0, 31), + [K3RTC_S_CNT_MSW] = REG_FIELD(REG_K3RTC_S_CNT_MSW, 0, 15), + [K3RTC_O32K_OSC_DEP_EN] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 21, 21), + [K3RTC_UNLOCK] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 23, 23), + [K3RTC_CNT_FMODE] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 24, 25), + [K3RTC_PEND] = REG_FIELD(REG_K3RTC_SYNCPEND, 0, 1), + [K3RTC_RELOAD_FROM_BBD] = REG_FIELD(REG_K3RTC_SYNCPEND, 31, 31), + [K3RTC_COMP] = REG_FIELD(REG_K3RTC_COMP, 0, 31), + + /* We use on to off as alarm trigger */ + [K3RTC_ALM_S_CNT_LSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_LSW, 0, 31), + [K3RTC_ALM_S_CNT_MSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_MSW, 0, 15), + [K3RTC_IRQ_STATUS_RAW] = REG_FIELD(REG_K3RTC_IRQSTATUS_RAW_SYS, 0, 0), + [K3RTC_IRQ_STATUS] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 0, 0), + [K3RTC_IRQ_ENABLE_SET] = REG_FIELD(REG_K3RTC_IRQENABLE_SET_SYS, 0, 0), + [K3RTC_IRQ_ENABLE_CLR] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 0, 0), + /* Off to on is alternate */ + [K3RTC_IRQ_STATUS_ALT] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 1, 1), + [K3RTC_IRQ_ENABLE_CLR_ALT] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 1, 1), +}; + +/** + * struct ti_k3_rtc - Private data for ti-k3-rtc + * @irq: IRQ + * @sync_timeout_us: data sync timeout period in uSec + * @rate_32k: 32k clock rate in Hz + * @rtc_dev: rtc device + * @regmap: rtc mmio regmap + * @r_fields: rtc register fields + * @soc: SoC compatible match data + */ +struct ti_k3_rtc { + unsigned int irq; + u32 sync_timeout_us; + unsigned long rate_32k; + struct rtc_device *rtc_dev; + struct regmap *regmap; + struct regmap_field *r_fields[K3_RTC_MAX_FIELDS]; + const struct ti_k3_rtc_soc_data *soc; +}; + +static int k3rtc_field_read(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f) +{ + int ret; + int val; + + ret = regmap_field_read(priv->r_fields[f], &val); + /* + * We shouldn't be seeing regmap fail on us for mmio reads + * This is possible if clock context fails, but that isn't the case for us + */ + if (WARN_ON_ONCE(ret)) + return ret; + return val; +} + +static void k3rtc_field_write(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f, u32 val) +{ + regmap_field_write(priv->r_fields[f], val); +} + +/** + * k3rtc_fence - Ensure a register sync took place between the two domains + * @priv: pointer to priv data + * + * Return: 0 if the sync took place, else returns -ETIMEDOUT + */ +static int k3rtc_fence(struct ti_k3_rtc *priv) +{ + int ret; + + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_PEND], ret, + !ret, 2, priv->sync_timeout_us); + + return ret; +} + +static inline int k3rtc_check_unlocked(struct ti_k3_rtc *priv) +{ + int ret; + + ret = k3rtc_field_read(priv, K3RTC_UNLOCK); + if (ret < 0) + return ret; + + return (ret) ? 0 : 1; +} + +static int k3rtc_unlock_rtc(struct ti_k3_rtc *priv) +{ + int ret; + + ret = k3rtc_check_unlocked(priv); + if (!ret) + return ret; + + k3rtc_field_write(priv, K3RTC_KICK0, K3RTC_KICK0_UNLOCK_VALUE); + k3rtc_field_write(priv, K3RTC_KICK1, K3RTC_KICK1_UNLOCK_VALUE); + + /* Skip fence since we are going to check the unlock bit as fence */ + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_UNLOCK], ret, + !ret, 2, priv->sync_timeout_us); + + return ret; +} + +static int k3rtc_configure(struct device *dev) +{ + int ret; + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + /* + * HWBUG: The compare state machine is broken if the RTC module + * is NOT unlocked in under one second of boot - which is pretty long + * time from the perspective of Linux driver (module load, u-boot + * shell all can take much longer than this. + * + * In such occurrence, it is assumed that the RTC module is unusable + */ + if (priv->soc->unlock_irq_erratum) { + ret = k3rtc_check_unlocked(priv); + /* If there is an error OR if we are locked, return error */ + if (ret) { + dev_err(dev, + HW_ERR "Erratum i2327 unlock QUIRK! Cannot operate!!\n"); + return -EFAULT; + } + } else { + /* May need to explicitly unlock first time */ + ret = k3rtc_unlock_rtc(priv); + if (ret) { + dev_err(dev, "Failed to unlock(%d)!\n", ret); + return ret; + } + } + + /* Enable Shadow register sync on 32k clock boundary */ + k3rtc_field_write(priv, K3RTC_O32K_OSC_DEP_EN, 0x1); + + /* + * Wait at least clock sync time before proceeding further programming. + * This ensures that the 32k based sync is active. + */ + usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 5); + + /* We need to ensure fence here to make sure sync here */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, + "Failed fence osc_dep enable(%d) - is 32k clk working?!\n", ret); + return ret; + } + + /* + * FMODE setting: Reading lower seconds will freeze value on higher + * seconds. This also implies that we must *ALWAYS* read lower seconds + * prior to reading higher seconds + */ + k3rtc_field_write(priv, K3RTC_CNT_FMODE, K3RTC_CNT_FMODE_S_CNT_VALUE); + + /* Clear any spurious IRQ sources if any */ + k3rtc_field_write(priv, K3RTC_IRQ_STATUS_ALT, 0x1); + k3rtc_field_write(priv, K3RTC_IRQ_STATUS, 0x1); + /* Disable all IRQs */ + k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR_ALT, 0x1); + k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR, 0x1); + + /* And.. Let us Sync the writes in */ + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 seconds_lo, seconds_hi; + + seconds_lo = k3rtc_field_read(priv, K3RTC_S_CNT_LSW); + seconds_hi = k3rtc_field_read(priv, K3RTC_S_CNT_MSW); + + rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, tm); + + return 0; +} + +static int ti_k3_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + time64_t seconds; + + seconds = rtc_tm_to_time64(tm); + + /* + * Read operation on LSW will freeze the RTC, so to update + * the time, we cannot use field operations. Just write since the + * reserved bits are ignored. + */ + regmap_write(priv->regmap, REG_K3RTC_S_CNT_LSW, seconds); + regmap_write(priv->regmap, REG_K3RTC_S_CNT_MSW, seconds >> 32); + + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 reg; + u32 offset = enabled ? K3RTC_IRQ_ENABLE_SET : K3RTC_IRQ_ENABLE_CLR; + + reg = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); + if ((enabled && reg) || (!enabled && !reg)) + return 0; + + k3rtc_field_write(priv, offset, 0x1); + + /* + * Ensure the write sync is through - NOTE: it should be OK to have + * ISR to fire as we are checking sync (which should be done in a 32k + * cycle or so). + */ + return k3rtc_fence(priv); +} + +static int ti_k3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 seconds_lo, seconds_hi; + + seconds_lo = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_LSW); + seconds_hi = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_MSW); + + rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, &alarm->time); + + alarm->enabled = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET); + + return 0; +} + +static int ti_k3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + time64_t seconds; + int ret; + + seconds = rtc_tm_to_time64(&alarm->time); + + k3rtc_field_write(priv, K3RTC_ALM_S_CNT_LSW, seconds); + k3rtc_field_write(priv, K3RTC_ALM_S_CNT_MSW, (seconds >> 32)); + + /* Make sure the alarm time is synced in */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence(%d)! Potential config issue?\n", ret); + return ret; + } + + /* Alarm IRQ enable will do a sync */ + return ti_k3_rtc_alarm_irq_enable(dev, alarm->enabled); +} + +static int ti_k3_rtc_read_offset(struct device *dev, long *offset) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 ticks_per_hr = priv->rate_32k * 3600; + int comp; + s64 tmp; + + comp = k3rtc_field_read(priv, K3RTC_COMP); + + /* Convert from RTC calibration register format to ppb format */ + tmp = comp * (s64)K3RTC_PPB_MULT; + if (tmp < 0) + tmp -= ticks_per_hr / 2LL; + else + tmp += ticks_per_hr / 2LL; + tmp = div_s64(tmp, ticks_per_hr); + + /* Offset value operates in negative way, so swap sign */ + *offset = (long)-tmp; + + return 0; +} + +static int ti_k3_rtc_set_offset(struct device *dev, long offset) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 ticks_per_hr = priv->rate_32k * 3600; + int comp; + s64 tmp; + + /* Make sure offset value is within supported range */ + if (offset < K3RTC_MIN_OFFSET || offset > K3RTC_MAX_OFFSET) + return -ERANGE; + + /* Convert from ppb format to RTC calibration register format */ + tmp = offset * (s64)ticks_per_hr; + if (tmp < 0) + tmp -= K3RTC_PPB_MULT / 2LL; + else + tmp += K3RTC_PPB_MULT / 2LL; + tmp = div_s64(tmp, K3RTC_PPB_MULT); + + /* Offset value operates in negative way, so swap sign */ + comp = (int)-tmp; + + k3rtc_field_write(priv, K3RTC_COMP, comp); + + return k3rtc_fence(priv); +} + +static irqreturn_t ti_k3_rtc_interrupt(s32 irq, void *dev_id) +{ + struct device *dev = dev_id; + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + u32 reg; + int ret; + + /* + * IRQ assertion can be very fast, however, the IRQ Status clear + * de-assert depends on 32k clock edge in the 32k domain + * If we clear the status prior to the first 32k clock edge, + * the status bit is cleared, but the IRQ stays re-asserted. + * + * To prevent this condition, we need to wait for clock sync time. + * We can either do that by polling the 32k observability signal for + * a toggle OR we could just sleep and let the processor do other + * stuff. + */ + usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 2); + + /* Lets make sure that this is a valid interrupt */ + reg = k3rtc_field_read(priv, K3RTC_IRQ_STATUS); + + if (!reg) { + u32 raw = k3rtc_field_read(priv, K3RTC_IRQ_STATUS_RAW); + + dev_err(dev, + HW_ERR + "Erratum i2327/IRQ trig: status: 0x%08x / 0x%08x\n", reg, raw); + return IRQ_NONE; + } + + /* + * Write 1 to clear status reg + * We cannot use a field operation here due to a potential race between + * 32k domain and vbus domain. + */ + regmap_write(priv->regmap, REG_K3RTC_IRQSTATUS_SYS, 0x1); + + /* Sync the write in */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence irq status clr(%d)!\n", ret); + return IRQ_NONE; + } + + /* + * Force the 32k status to be reloaded back in to ensure status is + * reflected back correctly. + */ + k3rtc_field_write(priv, K3RTC_RELOAD_FROM_BBD, 0x1); + + /* Ensure the write sync is through */ + ret = k3rtc_fence(priv); + if (ret) { + dev_err(dev, "Failed to fence reload from bbd(%d)!\n", ret); + return IRQ_NONE; + } + + /* Now we ensure that the status bit is cleared */ + ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_IRQ_STATUS], + ret, !ret, 2, priv->sync_timeout_us); + if (ret) { + dev_err(dev, "Time out waiting for status clear\n"); + return IRQ_NONE; + } + + /* Notify RTC core on event */ + rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF); + + return IRQ_HANDLED; +} + +static const struct rtc_class_ops ti_k3_rtc_ops = { + .read_time = ti_k3_rtc_read_time, + .set_time = ti_k3_rtc_set_time, + .read_alarm = ti_k3_rtc_read_alarm, + .set_alarm = ti_k3_rtc_set_alarm, + .read_offset = ti_k3_rtc_read_offset, + .set_offset = ti_k3_rtc_set_offset, + .alarm_irq_enable = ti_k3_rtc_alarm_irq_enable, +}; + +static int ti_k3_rtc_scratch_read(void *priv_data, unsigned int offset, + void *val, size_t bytes) +{ + struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; + + return regmap_bulk_read(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); +} + +static int ti_k3_rtc_scratch_write(void *priv_data, unsigned int offset, + void *val, size_t bytes) +{ + struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data; + int ret; + + ret = regmap_bulk_write(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4); + if (ret) + return ret; + + return k3rtc_fence(priv); +} + +static struct nvmem_config ti_k3_rtc_nvmem_config = { + .name = "ti_k3_rtc_scratch", + .word_size = 4, + .stride = 4, + .size = REG_K3RTC_SCRATCH7 - REG_K3RTC_SCRATCH0 + 4, + .reg_read = ti_k3_rtc_scratch_read, + .reg_write = ti_k3_rtc_scratch_write, +}; + +static int k3rtc_get_32kclk(struct device *dev, struct ti_k3_rtc *priv) +{ + int ret; + struct clk *clk; + + clk = devm_clk_get(dev, "osc32k"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk); + if (ret) + return ret; + + priv->rate_32k = clk_get_rate(clk); + + /* Make sure we are exact 32k clock. Else, try to compensate delay */ + if (priv->rate_32k != 32768) + dev_warn(dev, "Clock rate %ld is not 32768! Could misbehave!\n", + priv->rate_32k); + + /* + * Sync timeout should be two 32k clk sync cycles = ~61uS. We double + * it to comprehend intermediate bus segment and cpu frequency + * deltas + */ + priv->sync_timeout_us = (u32)(DIV_ROUND_UP_ULL(1000000, priv->rate_32k) * 4); + + return ret; +} + +static int k3rtc_get_vbusclk(struct device *dev, struct ti_k3_rtc *priv) +{ + int ret; + struct clk *clk; + + /* Note: VBUS isn't a context clock, it is needed for hardware operation */ + clk = devm_clk_get(dev, "vbus"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + return devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk); +} + +static int ti_k3_rtc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ti_k3_rtc *priv; + void __iomem *rtc_base; + int ret; + + priv = devm_kzalloc(dev, sizeof(struct ti_k3_rtc), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + rtc_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(rtc_base)) + return PTR_ERR(rtc_base); + + priv->regmap = devm_regmap_init_mmio(dev, rtc_base, &ti_k3_rtc_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->r_fields, + ti_rtc_reg_fields, K3_RTC_MAX_FIELDS); + if (ret) + return ret; + + ret = k3rtc_get_32kclk(dev, priv); + if (ret) + return ret; + ret = k3rtc_get_vbusclk(dev, priv); + if (ret) + return ret; + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + priv->irq = (unsigned int)ret; + + priv->rtc_dev = devm_rtc_allocate_device(dev); + if (IS_ERR(priv->rtc_dev)) + return PTR_ERR(priv->rtc_dev); + + priv->soc = of_device_get_match_data(dev); + + priv->rtc_dev->ops = &ti_k3_rtc_ops; + priv->rtc_dev->range_max = (1ULL << 48) - 1; /* 48Bit seconds */ + ti_k3_rtc_nvmem_config.priv = priv; + + ret = devm_request_threaded_irq(dev, priv->irq, NULL, + ti_k3_rtc_interrupt, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + dev_name(dev), dev); + if (ret) { + dev_err(dev, "Could not request IRQ: %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, priv); + + ret = k3rtc_configure(dev); + if (ret) + return ret; + + if (device_property_present(dev, "wakeup-source")) + device_init_wakeup(dev, true); + else + device_set_wakeup_capable(dev, true); + + ret = devm_rtc_register_device(priv->rtc_dev); + if (ret) + return ret; + + return devm_rtc_nvmem_register(priv->rtc_dev, &ti_k3_rtc_nvmem_config); +} + +static const struct ti_k3_rtc_soc_data ti_k3_am62_data = { + .unlock_irq_erratum = true, +}; + +static const struct of_device_id ti_k3_rtc_of_match_table[] = { + {.compatible = "ti,am62-rtc", .data = &ti_k3_am62_data}, + {} +}; +MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table); + +static int __maybe_unused ti_k3_rtc_suspend(struct device *dev) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(priv->irq); + return 0; +} + +static int __maybe_unused ti_k3_rtc_resume(struct device *dev) +{ + struct ti_k3_rtc *priv = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(priv->irq); + return 0; +} + +static SIMPLE_DEV_PM_OPS(ti_k3_rtc_pm_ops, ti_k3_rtc_suspend, ti_k3_rtc_resume); + +static struct platform_driver ti_k3_rtc_driver = { + .probe = ti_k3_rtc_probe, + .driver = { + .name = "rtc-ti-k3", + .of_match_table = ti_k3_rtc_of_match_table, + .pm = &ti_k3_rtc_pm_ops, + }, +}; +module_platform_driver(ti_k3_rtc_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TI K3 RTC driver"); +MODULE_AUTHOR("Nishanth Menon"); |