diff options
Diffstat (limited to 'drivers')
130 files changed, 3148 insertions, 916 deletions
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index ddeb819c8f87..fc466531260e 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -357,7 +357,7 @@ static void fw_dev_release(struct device *dev) kfree(fw_priv->pages); kfree(fw_priv->fw_id); kfree(fw_priv); - put_device(dev); + kfree(dev); module_put(THIS_MODULE); } @@ -408,13 +408,11 @@ static int fw_register_device(struct device **dev_p, const char *fw_name, if (retval) { dev_err(device, "%s: device_register failed\n", __func__); put_device(f_dev); - goto error_kfree_fw_id; + return retval; } *dev_p = f_dev; return 0; -error_kfree_fw_id: - kfree(fw_priv->fw_id); error_kfree: kfree(f_dev); kfree(fw_priv); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index fae725458981..58a3e572f2c9 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -762,6 +762,7 @@ static int dpm_prepare(pm_message_t state) dev->power.status = DPM_ON; if (error == -EAGAIN) { put_device(dev); + error = 0; continue; } printk(KERN_ERR "PM: Failed to prepare device %s " diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index bb72ada9f074..1d886e079c58 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -298,6 +298,22 @@ config BLK_DEV_NBD If unsure, say N. +config BLK_DEV_OSD + tristate "OSD object-as-blkdev support" + depends on SCSI_OSD_ULD + ---help--- + Saying Y or M here will allow the exporting of a single SCSI + OSD (object-based storage) object as a Linux block device. + + For example, if you create a 2G object on an OSD device, + you can then use this module to present that 2G object as + a Linux block device. + + To compile this driver as a module, choose M here: the + module will be called osdblk. + + If unsure, say N. + config BLK_DEV_SX8 tristate "Promise SATA SX8 support" depends on PCI diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 7755a5e2a85e..cdaa3f8fddf0 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o obj-$(CONFIG_MG_DISK) += mg_disk.o obj-$(CONFIG_SUNVDC) += sunvdc.o +obj-$(CONFIG_BLK_DEV_OSD) += osdblk.o obj-$(CONFIG_BLK_DEV_UMEM) += umem.o obj-$(CONFIG_BLK_DEV_NBD) += nbd.o diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 9c6e5b0fe894..2f07b7c99a95 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1645,7 +1645,7 @@ static int __init fd_probe_drives(void) { int drive,drives,nomem; - printk(KERN_INFO "FD: probing units\n" KERN_INFO "found "); + printk(KERN_INFO "FD: probing units\nfound "); drives=0; nomem=0; for(drive=0;drive<FD_MAX_UNITS;drive++) { diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c new file mode 100644 index 000000000000..13c1aee6aa3f --- /dev/null +++ b/drivers/block/osdblk.c @@ -0,0 +1,701 @@ + +/* + osdblk.c -- Export a single SCSI OSD object as a Linux block device + + + Copyright 2009 Red Hat, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + + Instructions for use + -------------------- + + 1) Map a Linux block device to an existing OSD object. + + In this example, we will use partition id 1234, object id 5678, + OSD device /dev/osd1. + + $ echo "1234 5678 /dev/osd1" > /sys/class/osdblk/add + + + 2) List all active blkdev<->object mappings. + + In this example, we have performed step #1 twice, creating two blkdevs, + mapped to two separate OSD objects. + + $ cat /sys/class/osdblk/list + 0 174 1234 5678 /dev/osd1 + 1 179 1994 897123 /dev/osd0 + + The columns, in order, are: + - blkdev unique id + - blkdev assigned major + - OSD object partition id + - OSD object id + - OSD device + + + 3) Remove an active blkdev<->object mapping. + + In this example, we remove the mapping with blkdev unique id 1. + + $ echo 1 > /sys/class/osdblk/remove + + + NOTE: The actual creation and deletion of OSD objects is outside the scope + of this driver. + + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <scsi/osd_initiator.h> +#include <scsi/osd_attributes.h> +#include <scsi/osd_sec.h> +#include <scsi/scsi_device.h> + +#define DRV_NAME "osdblk" +#define PFX DRV_NAME ": " + +/* #define _OSDBLK_DEBUG */ +#ifdef _OSDBLK_DEBUG +#define OSDBLK_DEBUG(fmt, a...) \ + printk(KERN_NOTICE "osdblk @%s:%d: " fmt, __func__, __LINE__, ##a) +#else +#define OSDBLK_DEBUG(fmt, a...) \ + do { if (0) printk(fmt, ##a); } while (0) +#endif + +MODULE_AUTHOR("Jeff Garzik <jeff@garzik.org>"); +MODULE_DESCRIPTION("block device inside an OSD object osdblk.ko"); +MODULE_LICENSE("GPL"); + +struct osdblk_device; + +enum { + OSDBLK_MINORS_PER_MAJOR = 256, /* max minors per blkdev */ + OSDBLK_MAX_REQ = 32, /* max parallel requests */ + OSDBLK_OP_TIMEOUT = 4 * 60, /* sync OSD req timeout */ +}; + +struct osdblk_request { + struct request *rq; /* blk layer request */ + struct bio *bio; /* cloned bio */ + struct osdblk_device *osdev; /* associated blkdev */ +}; + +struct osdblk_device { + int id; /* blkdev unique id */ + + int major; /* blkdev assigned major */ + struct gendisk *disk; /* blkdev's gendisk and rq */ + struct request_queue *q; + + struct osd_dev *osd; /* associated OSD */ + + char name[32]; /* blkdev name, e.g. osdblk34 */ + + spinlock_t lock; /* queue lock */ + + struct osd_obj_id obj; /* OSD partition, obj id */ + uint8_t obj_cred[OSD_CAP_LEN]; /* OSD cred */ + + struct osdblk_request req[OSDBLK_MAX_REQ]; /* request table */ + + struct list_head node; + + char osd_path[0]; /* OSD device path */ +}; + +static struct class *class_osdblk; /* /sys/class/osdblk */ +static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */ +static LIST_HEAD(osdblkdev_list); + +static struct block_device_operations osdblk_bd_ops = { + .owner = THIS_MODULE, +}; + +static const struct osd_attr g_attr_logical_length = ATTR_DEF( + OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8); + +static void osdblk_make_credential(u8 cred_a[OSD_CAP_LEN], + const struct osd_obj_id *obj) +{ + osd_sec_init_nosec_doall_caps(cred_a, obj, false, true); +} + +/* copied from exofs; move to libosd? */ +/* + * Perform a synchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_sync_op(struct osd_request *or, int timeout, uint8_t *credential) +{ + int ret; + + or->timeout = timeout; + ret = osd_finalize_request(or, 0, credential, NULL); + if (ret) + return ret; + + ret = osd_execute_request(or); + + /* osd_req_decode_sense(or, ret); */ + return ret; +} + +/* + * Perform an asynchronous OSD operation. copied from exofs; move to libosd? + */ +static int osd_async_op(struct osd_request *or, osd_req_done_fn *async_done, + void *caller_context, u8 *cred) +{ + int ret; + + ret = osd_finalize_request(or, 0, cred, NULL); + if (ret) + return ret; + + ret = osd_execute_request_async(or, async_done, caller_context); + + return ret; +} + +/* copied from exofs; move to libosd? */ +static int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr) +{ + struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */ + void *iter = NULL; + int nelem; + + do { + nelem = 1; + osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter); + if ((cur_attr.attr_page == attr->attr_page) && + (cur_attr.attr_id == attr->attr_id)) { + attr->len = cur_attr.len; + attr->val_ptr = cur_attr.val_ptr; + return 0; + } + } while (iter); + + return -EIO; +} + +static int osdblk_get_obj_size(struct osdblk_device *osdev, u64 *size_out) +{ + struct osd_request *or; + struct osd_attr attr; + int ret; + + /* start request */ + or = osd_start_request(osdev->osd, GFP_KERNEL); + if (!or) + return -ENOMEM; + + /* create a get-attributes(length) request */ + osd_req_get_attributes(or, &osdev->obj); + + osd_req_add_get_attr_list(or, &g_attr_logical_length, 1); + + /* execute op synchronously */ + ret = osd_sync_op(or, OSDBLK_OP_TIMEOUT, osdev->obj_cred); + if (ret) + goto out; + + /* extract length from returned attribute info */ + attr = g_attr_logical_length; + ret = extract_attr_from_req(or, &attr); + if (ret) + goto out; + + *size_out = get_unaligned_be64(attr.val_ptr); + +out: + osd_end_request(or); + return ret; + +} + +static void osdblk_osd_complete(struct osd_request *or, void *private) +{ + struct osdblk_request *orq = private; + struct osd_sense_info osi; + int ret = osd_req_decode_sense(or, &osi); + + if (ret) { + ret = -EIO; + OSDBLK_DEBUG("osdblk_osd_complete with err=%d\n", ret); + } + + /* complete OSD request */ + osd_end_request(or); + + /* complete request passed to osdblk by block layer */ + __blk_end_request_all(orq->rq, ret); +} + +static void bio_chain_put(struct bio *chain) +{ + struct bio *tmp; + + while (chain) { + tmp = chain; + chain = chain->bi_next; + + bio_put(tmp); + } +} + +static struct bio *bio_chain_clone(struct bio *old_chain, gfp_t gfpmask) +{ + struct bio *tmp, *new_chain = NULL, *tail = NULL; + + while (old_chain) { + tmp = bio_kmalloc(gfpmask, old_chain->bi_max_vecs); + if (!tmp) + goto err_out; + + __bio_clone(tmp, old_chain); + tmp->bi_bdev = NULL; + gfpmask &= ~__GFP_WAIT; + tmp->bi_next = NULL; + + if (!new_chain) + new_chain = tail = tmp; + else { + tail->bi_next = tmp; + tail = tmp; + } + + old_chain = old_chain->bi_next; + } + + return new_chain; + +err_out: + OSDBLK_DEBUG("bio_chain_clone with err\n"); + bio_chain_put(new_chain); + return NULL; +} + +static void osdblk_rq_fn(struct request_queue *q) +{ + struct osdblk_device *osdev = q->queuedata; + + while (1) { + struct request *rq; + struct osdblk_request *orq; + struct osd_request *or; + struct bio *bio; + bool do_write, do_flush; + + /* peek at request from block layer */ + rq = blk_fetch_request(q); + if (!rq) + break; + + /* filter out block requests we don't understand */ + if (!blk_fs_request(rq) && !blk_barrier_rq(rq)) { + blk_end_request_all(rq, 0); + continue; + } + + /* deduce our operation (read, write, flush) */ + /* I wish the block layer simplified cmd_type/cmd_flags/cmd[] + * into a clearly defined set of RPC commands: + * read, write, flush, scsi command, power mgmt req, + * driver-specific, etc. + */ + + do_flush = (rq->special == (void *) 0xdeadbeefUL); + do_write = (rq_data_dir(rq) == WRITE); + + if (!do_flush) { /* osd_flush does not use a bio */ + /* a bio clone to be passed down to OSD request */ + bio = bio_chain_clone(rq->bio, GFP_ATOMIC); + if (!bio) + break; + } else + bio = NULL; + + /* alloc internal OSD request, for OSD command execution */ + or = osd_start_request(osdev->osd, GFP_ATOMIC); + if (!or) { + bio_chain_put(bio); + OSDBLK_DEBUG("osd_start_request with err\n"); + break; + } + + orq = &osdev->req[rq->tag]; + orq->rq = rq; + orq->bio = bio; + orq->osdev = osdev; + + /* init OSD command: flush, write or read */ + if (do_flush) + osd_req_flush_object(or, &osdev->obj, + OSD_CDB_FLUSH_ALL, 0, 0); + else if (do_write) + osd_req_write(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + else + osd_req_read(or, &osdev->obj, blk_rq_pos(rq) * 512ULL, + bio, blk_rq_bytes(rq)); + + OSDBLK_DEBUG("%s 0x%x bytes at 0x%llx\n", + do_flush ? "flush" : do_write ? + "write" : "read", blk_rq_bytes(rq), + blk_rq_pos(rq) * 512ULL); + + /* begin OSD command execution */ + if (osd_async_op(or, osdblk_osd_complete, orq, + osdev->obj_cred)) { + osd_end_request(or); + blk_requeue_request(q, rq); + bio_chain_put(bio); + OSDBLK_DEBUG("osd_execute_request_async with err\n"); + break; + } + + /* remove the special 'flush' marker, now that the command + * is executing + */ + rq->special = NULL; + } +} + +static void osdblk_prepare_flush(struct request_queue *q, struct request *rq) +{ + /* add driver-specific marker, to indicate that this request + * is a flush command + */ + rq->special = (void *) 0xdeadbeefUL; +} + +static void osdblk_free_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk = osdev->disk; + + if (!disk) + return; + + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (disk->queue) + blk_cleanup_queue(disk->queue); + put_disk(disk); +} + +static int osdblk_init_disk(struct osdblk_device *osdev) +{ + struct gendisk *disk; + struct request_queue *q; + int rc; + u64 obj_size = 0; + + /* contact OSD, request size info about the object being mapped */ + rc = osdblk_get_obj_size(osdev, &obj_size); + if (rc) + return rc; + + /* create gendisk info */ + disk = alloc_disk(OSDBLK_MINORS_PER_MAJOR); + if (!disk) + return -ENOMEM; + + sprintf(disk->disk_name, DRV_NAME "%d", osdev->id); + disk->major = osdev->major; + disk->first_minor = 0; + disk->fops = &osdblk_bd_ops; + disk->private_data = osdev; + + /* init rq */ + q = blk_init_queue(osdblk_rq_fn, &osdev->lock); + if (!q) { + put_disk(disk); + return -ENOMEM; + } + + /* switch queue to TCQ mode; allocate tag map */ + rc = blk_queue_init_tags(q, OSDBLK_MAX_REQ, NULL); + if (rc) { + blk_cleanup_queue(q); + put_disk(disk); + return rc; + } + + /* Set our limits to the lower device limits, because osdblk cannot + * sleep when allocating a lower-request and therefore cannot be + * bouncing. + */ + blk_queue_stack_limits(q, osd_request_queue(osdev->osd)); + + blk_queue_prep_rq(q, blk_queue_start_tag); + blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush); + + disk->queue = q; + + q->queuedata = osdev; + + osdev->disk = disk; + osdev->q = q; + + /* finally, announce the disk to the world */ + set_capacity(disk, obj_size / 512ULL); + add_disk(disk); + + printk(KERN_INFO "%s: Added of size 0x%llx\n", + disk->disk_name, (unsigned long long)obj_size); + + return 0; +} + +/******************************************************************** + * /sys/class/osdblk/ + * add map OSD object to blkdev + * remove unmap OSD object + * list show mappings + *******************************************************************/ + +static void class_osdblk_release(struct class *cls) +{ + kfree(cls); +} + +static ssize_t class_osdblk_list(struct class *c, char *data) +{ + int n = 0; + struct list_head *tmp; + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + + n += sprintf(data+n, "%d %d %llu %llu %s\n", + osdev->id, + osdev->major, + osdev->obj.partition, + osdev->obj.id, + osdev->osd_path); + } + + mutex_unlock(&ctl_mutex); + return n; +} + +static ssize_t class_osdblk_add(struct class *c, const char *buf, size_t count) +{ + struct osdblk_device *osdev; + ssize_t rc; + int irc, new_id = 0; + struct list_head *tmp; + + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + /* new osdblk_device object */ + osdev = kzalloc(sizeof(*osdev) + strlen(buf) + 1, GFP_KERNEL); + if (!osdev) { + rc = -ENOMEM; + goto err_out_mod; + } + + /* static osdblk_device initialization */ + spin_lock_init(&osdev->lock); + INIT_LIST_HEAD(&osdev->node); + + /* generate unique id: find highest unique id, add one */ + + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + struct osdblk_device *osdev; + + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id > new_id) + new_id = osdev->id + 1; + } + + osdev->id = new_id; + + /* add to global list */ + list_add_tail(&osdev->node, &osdblkdev_list); + + mutex_unlock(&ctl_mutex); + + /* parse add command */ + if (sscanf(buf, "%llu %llu %s", &osdev->obj.partition, &osdev->obj.id, + osdev->osd_path) != 3) { + rc = -EINVAL; + goto err_out_slot; + } + + /* initialize rest of new object */ + sprintf(osdev->name, DRV_NAME "%d", osdev->id); + + /* contact requested OSD */ + osdev->osd = osduld_path_lookup(osdev->osd_path); + if (IS_ERR(osdev->osd)) { + rc = PTR_ERR(osdev->osd); + goto err_out_slot; + } + + /* build OSD credential */ + osdblk_make_credential(osdev->obj_cred, &osdev->obj); + + /* register our block device */ + irc = register_blkdev(0, osdev->name); + if (irc < 0) { + rc = irc; + goto err_out_osd; + } + + osdev->major = irc; + + /* set up and announce blkdev mapping */ + rc = osdblk_init_disk(osdev); + if (rc) + goto err_out_blkdev; + + return count; + +err_out_blkdev: + unregister_blkdev(osdev->major, osdev->name); +err_out_osd: + osduld_put_device(osdev->osd); +err_out_slot: + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + list_del_init(&osdev->node); + mutex_unlock(&ctl_mutex); + + kfree(osdev); +err_out_mod: + OSDBLK_DEBUG("Error adding device %s\n", buf); + module_put(THIS_MODULE); + return rc; +} + +static ssize_t class_osdblk_remove(struct class *c, const char *buf, + size_t count) +{ + struct osdblk_device *osdev = NULL; + int target_id, rc; + unsigned long ul; + struct list_head *tmp; + + rc = strict_strtoul(buf, 10, &ul); + if (rc) + return rc; + + /* convert to int; abort if we lost anything in the conversion */ + target_id = (int) ul; + if (target_id != ul) + return -EINVAL; + + /* remove object from list immediately */ + mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); + + list_for_each(tmp, &osdblkdev_list) { + osdev = list_entry(tmp, struct osdblk_device, node); + if (osdev->id == target_id) { + list_del_init(&osdev->node); + break; + } + osdev = NULL; + } + + mutex_unlock(&ctl_mutex); + + if (!osdev) + return -ENOENT; + + /* clean up and free blkdev and associated OSD connection */ + osdblk_free_disk(osdev); + unregister_blkdev(osdev->major, osdev->name); + osduld_put_device(osdev->osd); + kfree(osdev); + + /* release module ref */ + module_put(THIS_MODULE); + + return count; +} + +static struct class_attribute class_osdblk_attrs[] = { + __ATTR(add, 0200, NULL, class_osdblk_add), + __ATTR(remove, 0200, NULL, class_osdblk_remove), + __ATTR(list, 0444, class_osdblk_list, NULL), + __ATTR_NULL +}; + +static int osdblk_sysfs_init(void) +{ + int ret = 0; + + /* + * create control files in sysfs + * /sys/class/osdblk/... + */ + class_osdblk = kzalloc(sizeof(*class_osdblk), GFP_KERNEL); + if (!class_osdblk) + return -ENOMEM; + + class_osdblk->name = DRV_NAME; + class_osdblk->owner = THIS_MODULE; + class_osdblk->class_release = class_osdblk_release; + class_osdblk->class_attrs = class_osdblk_attrs; + + ret = class_register(class_osdblk); + if (ret) { + kfree(class_osdblk); + class_osdblk = NULL; + printk(PFX "failed to create class osdblk\n"); + return ret; + } + + return 0; +} + +static void osdblk_sysfs_cleanup(void) +{ + if (class_osdblk) + class_destroy(class_osdblk); + class_osdblk = NULL; +} + +static int __init osdblk_init(void) +{ + int rc; + + rc = osdblk_sysfs_init(); + if (rc) + return rc; + + return 0; +} + +static void __exit osdblk_exit(void) +{ + osdblk_sysfs_cleanup(); +} + +module_init(osdblk_init); +module_exit(osdblk_exit); + diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 83650e00632d..99a506f619b7 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -1372,8 +1372,10 @@ try_next_bio: wakeup = (pd->write_congestion_on > 0 && pd->bio_queue_size <= pd->write_congestion_off); spin_unlock(&pd->lock); - if (wakeup) - clear_bdi_congested(&pd->disk->queue->backing_dev_info, WRITE); + if (wakeup) { + clear_bdi_congested(&pd->disk->queue->backing_dev_info, + BLK_RW_ASYNC); + } pkt->sleep_time = max(PACKET_WAIT_TIME, 1); pkt_set_state(pkt, PACKET_WAITING_STATE); @@ -2592,10 +2594,10 @@ static int pkt_make_request(struct request_queue *q, struct bio *bio) spin_lock(&pd->lock); if (pd->write_congestion_on > 0 && pd->bio_queue_size >= pd->write_congestion_on) { - set_bdi_congested(&q->backing_dev_info, WRITE); + set_bdi_congested(&q->backing_dev_info, BLK_RW_ASYNC); do { spin_unlock(&pd->lock); - congestion_wait(WRITE, HZ); + congestion_wait(BLK_RW_ASYNC, HZ); spin_lock(&pd->lock); } while(pd->bio_queue_size > pd->write_congestion_off); } diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f08491a3a813..b20abe102a2b 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -390,9 +390,10 @@ static inline void ace_dump_mem(void *base, int len) static void ace_dump_regs(struct ace_device *ace) { - dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" - KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n" - KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", + dev_info(ace->dev, + " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" + " status:%.8x mpu_lba:%.8x busmode:%4x\n" + " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", ace_in32(ace, ACE_CTRL), ace_in(ace, ACE_SECCNTCMD), ace_in(ace, ACE_VERSION), diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5dcbe603eca2..91b53eb1c053 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -305,10 +305,11 @@ static int __init intel_init_hw_struct(struct intel_rng_hw *intel_rng_hw, (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)) == BIOS_CNTL_LOCK_ENABLE_MASK) { static __initdata /*const*/ char warning[] = - KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n" - KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n" - KERN_WARNING PFX "you are certain that your system has a functional\n" - KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n"; + KERN_WARNING +PFX "Firmware space is locked read-only. If you can't or\n" +PFX "don't want to disable this in firmware setup, and if\n" +PFX "you are certain that your system has a functional\n" +PFX "RNG, try using the 'no_fwh_detect' option.\n"; if (no_fwh_detect) return -ENODEV; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 4159292e35cf..621d1184673c 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1478,10 +1478,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected load header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status:0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status:0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } outsw(base, frame->data, word_count); @@ -1526,10 +1526,10 @@ static int __devinit load_firmware(struct pci_dev *pdev, status = inw(base + 0x4); if (status != 0) { dev_warn(&pdev->dev, "Card%d rejected verify header:\n" - KERN_WARNING "Address:0x%x\n" - KERN_WARNING "Count:0x%x\n" - KERN_WARNING "Status: 0x%x\n", - index + 1, frame->addr, frame->count, status); + "Address:0x%x\n" + "Count:0x%x\n" + "Status: 0x%x\n", + index + 1, frame->addr, frame->count, status); goto errrelfw; } diff --git a/drivers/char/pty.c b/drivers/char/pty.c index daebe1ba43d4..9d1b4f548f67 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -75,114 +75,88 @@ static void pty_close(struct tty_struct *tty, struct file *filp) */ static void pty_unthrottle(struct tty_struct *tty) { - struct tty_struct *o_tty = tty->link; - - if (!o_tty) - return; - - tty_wakeup(o_tty); + tty_wakeup(tty->link); set_bit(TTY_THROTTLED, &tty->flags); } -/* - * WSH 05/24/97: modified to - * (1) use space in tty->flip instead of a shared temp buffer - * The flip buffers aren't being used for a pty, so there's lots - * of space available. The buffer is protected by a per-pty - * semaphore that should almost never come under contention. - * (2) avoid redundant copying for cases where count >> receive_room - * N.B. Calls from user space may now return an error code instead of - * a count. +/** + * pty_space - report space left for writing + * @to: tty we are writing into * - * FIXME: Our pty_write method is called with our ldisc lock held but - * not our partners. We can't just wait on the other one blindly without - * risking deadlocks. At some point when everything has settled down we need - * to look into making pty_write at least able to sleep over an ldisc change. + * The tty buffers allow 64K but we sneak a peak and clip at 8K this + * allows a lot of overspill room for echo and other fun messes to + * be handled properly + */ + +static int pty_space(struct tty_struct *to) +{ + int n = 8192 - to->buf.memory_used; + if (n < 0) + return 0; + return n; +} + +/** + * pty_write - write to a pty + * @tty: the tty we write from + * @buf: kernel buffer of data + * @count: bytes to write * - * The return on no ldisc is a bit counter intuitive but the logic works - * like this. During an ldisc change the other end will flush its buffers. We - * thus return the full length which is identical to the case where we had - * proper locking and happened to queue the bytes just before the flush during - * the ldisc change. + * Our "hardware" write method. Data is coming from the ldisc which + * may be in a non sleeping state. We simply throw this at the other + * end of the link as if we were an IRQ handler receiving stuff for + * the other side of the pty/tty pair. */ + static int pty_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int c = count; + int c; - if (!to || tty->stopped) + if (tty->stopped) return 0; - ld = tty_ldisc_ref(to); - - if (ld) { - c = to->receive_room; - if (c > count) - c = count; - ld->ops->receive_buf(to, buf, NULL, c); - tty_ldisc_deref(ld); + + /* This isn't locked but our 8K is quite sloppy so no + big deal */ + + c = pty_space(to); + if (c > count) + c = count; + if (c > 0) { + /* Stuff the data into the input queue of the other end */ + c = tty_insert_flip_string(to, buf, c); + /* And shovel */ + tty_flip_buffer_push(to); + tty_wakeup(tty); } return c; } +/** + * pty_write_room - write space + * @tty: tty we are writing from + * + * Report how many bytes the ldisc can send into the queue for + * the other device. + */ + static int pty_write_room(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - - if (!to || tty->stopped) - return 0; - - return to->receive_room; + return pty_space(tty->link); } -/* - * WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior - * The chars_in_buffer() value is used by the ldisc select() function - * to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256). - * The pty driver chars_in_buffer() Master/Slave must behave differently: - * - * The Master side needs to allow typed-ahead commands to accumulate - * while being canonicalized, so we report "our buffer" as empty until - * some threshold is reached, and then report the count. (Any count > - * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock - * the count returned must be 0 if no canonical data is available to be - * read. (The N_TTY ldisc.chars_in_buffer now knows this.) +/** + * pty_chars_in_buffer - characters currently in our tx queue + * @tty: our tty * - * The Slave side passes all characters in raw mode to the Master side's - * buffer where they can be read immediately, so in this case we can - * return the true count in the buffer. + * Report how much we have in the transmit queue. As everything is + * instantly at the other end this is easy to implement. */ + static int pty_chars_in_buffer(struct tty_struct *tty) { - struct tty_struct *to = tty->link; - struct tty_ldisc *ld; - int count = 0; - - /* We should get the line discipline lock for "tty->link" */ - if (!to) - return 0; - /* We cannot take a sleeping reference here without deadlocking with - an ldisc change - but it doesn't really matter */ - ld = tty_ldisc_ref(to); - if (ld == NULL) - return 0; - - /* The ldisc must report 0 if no characters available to be read */ - if (ld->ops->chars_in_buffer) - count = ld->ops->chars_in_buffer(to); - - tty_ldisc_deref(ld); - - if (tty->driver->subtype == PTY_TYPE_SLAVE) - return count; - - /* Master side driver ... if the other side's read buffer is less than - * half full, return 0 to allow writers to proceed; otherwise return - * the count. This leaves a comfortable margin to avoid overflow, - * and still allows half a buffer's worth of typed-ahead commands. - */ - return (count < N_TTY_BUF_SIZE/2) ? 0 : count; + return 0; } /* Set the lock flag on a pty */ @@ -202,20 +176,10 @@ static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; unsigned long flags; - struct tty_ldisc *ld; if (!to) return; - ld = tty_ldisc_ref(to); - - /* The other end is changing discipline */ - if (!ld) - return; - - if (ld->ops->flush_buffer) - to->ldisc->ops->flush_buffer(to); - tty_ldisc_deref(ld); - + /* tty_buffer_flush(to); FIXME */ if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 6e2ec0b18948..b90eda8b3440 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -761,6 +761,10 @@ static struct kobj_type ktype_cpufreq = { * cpufreq_add_dev - add a CPU device * * Adds the cpufreq interface for a CPU device. + * + * The Oracle says: try running cpufreq registration/unregistration concurrently + * with with cpu hotplugging and all hell will break loose. Tried to clean this + * mess up, but more thorough testing is needed. - Mathieu */ static int cpufreq_add_dev(struct sys_device *sys_dev) { @@ -772,9 +776,6 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) struct sys_device *cpu_sys_dev; unsigned long flags; unsigned int j; -#ifdef CONFIG_SMP - struct cpufreq_policy *managed_policy; -#endif if (cpu_is_offline(cpu)) return 0; @@ -804,15 +805,12 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) goto nomem_out; } if (!alloc_cpumask_var(&policy->cpus, GFP_KERNEL)) { - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_policy; } if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { - free_cpumask_var(policy->cpus); - kfree(policy); ret = -ENOMEM; - goto nomem_out; + goto err_free_cpumask; } policy->cpu = cpu; @@ -820,7 +818,8 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* Initially set CPU itself as the policy_cpu */ per_cpu(policy_cpu, cpu) = cpu; - lock_policy_rwsem_write(cpu); + ret = (lock_policy_rwsem_write(cpu) < 0); + WARN_ON(ret); init_completion(&policy->kobj_unregister); INIT_WORK(&policy->update, handle_update); @@ -833,7 +832,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = cpufreq_driver->init(policy); if (ret) { dprintk("initialization failed\n"); - goto err_out; + goto err_unlock_policy; } policy->user_policy.min = policy->min; policy->user_policy.max = policy->max; @@ -852,21 +851,29 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) #endif for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (cpu == j) continue; /* Check for existing affected CPUs. * They may not be aware of it due to CPU Hotplug. */ - managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */ + managed_policy = cpufreq_cpu_get(j); if (unlikely(managed_policy)) { /* Set proper policy_cpu */ unlock_policy_rwsem_write(cpu); per_cpu(policy_cpu, cpu) = managed_policy->cpu; - if (lock_policy_rwsem_write(cpu) < 0) - goto err_out_driver_exit; + if (lock_policy_rwsem_write(cpu) < 0) { + /* Should not go through policy unlock path */ + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); + ret = -EBUSY; + cpufreq_cpu_put(managed_policy); + goto err_free_cpumask; + } spin_lock_irqsave(&cpufreq_driver_lock, flags); cpumask_copy(managed_policy->cpus, policy->cpus); @@ -877,12 +884,14 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = sysfs_create_link(&sys_dev->kobj, &managed_policy->kobj, "cpufreq"); - if (ret) - goto err_out_driver_exit; - - cpufreq_debug_enable_ratelimit(); - ret = 0; - goto err_out_driver_exit; /* call driver->exit() */ + if (!ret) + cpufreq_cpu_put(managed_policy); + /* + * Success. We only needed to be added to the mask. + * Call driver->exit() because only the cpu parent of + * the kobj needed to call init(). + */ + goto out_driver_exit; /* call driver->exit() */ } } #endif @@ -892,25 +901,25 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, "cpufreq"); if (ret) - goto err_out_driver_exit; + goto out_driver_exit; /* set up files for this cpu device */ drv_attr = cpufreq_driver->attr; while ((drv_attr) && (*drv_attr)) { ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; drv_attr++; } if (cpufreq_driver->get) { ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } if (cpufreq_driver->target) { ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) - goto err_out_driver_exit; + goto err_out_kobj_put; } spin_lock_irqsave(&cpufreq_driver_lock, flags); @@ -922,18 +931,22 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) /* symlink affected CPUs */ for_each_cpu(j, policy->cpus) { + struct cpufreq_policy *managed_policy; + if (j == cpu) continue; if (!cpu_online(j)) continue; dprintk("CPU %u already managed, adding link\n", j); - cpufreq_cpu_get(cpu); + managed_policy = cpufreq_cpu_get(cpu); cpu_sys_dev = get_cpu_sysdev(j); ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj, "cpufreq"); - if (ret) + if (ret) { + cpufreq_cpu_put(managed_policy); goto err_out_unregister; + } } policy->governor = NULL; /* to assure that the starting sequence is @@ -965,17 +978,20 @@ err_out_unregister: per_cpu(cpufreq_cpu_data, j) = NULL; spin_unlock_irqrestore(&cpufreq_driver_lock, flags); +err_out_kobj_put: kobject_put(&policy->kobj); wait_for_completion(&policy->kobj_unregister); -err_out_driver_exit: +out_driver_exit: if (cpufreq_driver->exit) cpufreq_driver->exit(policy); -err_out: +err_unlock_policy: unlock_policy_rwsem_write(cpu); +err_free_cpumask: + free_cpumask_var(policy->cpus); +err_free_policy: kfree(policy); - nomem_out: module_put(cpufreq_driver->owner); module_out: @@ -1070,8 +1086,6 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif - unlock_policy_rwsem_write(cpu); - if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); @@ -1088,6 +1102,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) if (cpufreq_driver->exit) cpufreq_driver->exit(data); + unlock_policy_rwsem_write(cpu); + free_cpumask_var(data->related_cpus); free_cpumask_var(data->cpus); kfree(data); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 7fc58af748b4..57490502b21c 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -63,22 +63,20 @@ struct cpu_dbs_info_s { unsigned int down_skip; unsigned int requested_freq; int cpu; - unsigned int enable:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -143,9 +141,6 @@ dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val, struct cpufreq_policy *policy; - if (!this_dbs_info->enable) - return 0; - policy = this_dbs_info->cur_policy; /* @@ -488,18 +483,12 @@ static void do_dbs_timer(struct work_struct *work) delay -= jiffies % delay; - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); dbs_check_cpu(dbs_info); queue_delayed_work_on(cpu, kconservative_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -508,7 +497,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kconservative_wq, &dbs_info->work, delay); @@ -516,7 +504,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -535,9 +522,6 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); @@ -561,6 +545,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, this_dbs_info->down_skip = 0; this_dbs_info->requested_freq = policy->cur; + mutex_init(&this_dbs_info->timer_mutex); dbs_enable++; /* * Start the timerschedule work, when this governor @@ -590,17 +575,19 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, &dbs_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + dbs_timer_init(this_dbs_info); + break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); dbs_enable--; + mutex_destroy(&this_dbs_info->timer_mutex); /* * Stop the timerschedule work, when this governor @@ -616,7 +603,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target( this_dbs_info->cur_policy, @@ -625,7 +612,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, __cpufreq_driver_target( this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 1911d1729353..d6ba14276bb1 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -70,23 +70,21 @@ struct cpu_dbs_info_s { unsigned int freq_lo_jiffies; unsigned int freq_hi_jiffies; int cpu; - unsigned int enable:1, - sample_type:1; + unsigned int sample_type:1; + /* + * percpu mutex that serializes governor limit change with + * do_dbs_timer invocation. We do not want do_dbs_timer to run + * when user is changing the governor or limits. + */ + struct mutex timer_mutex; }; static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); static unsigned int dbs_enable; /* number of CPUs using this policy */ /* - * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug - * lock and dbs_mutex. cpu_hotplug lock should always be held before - * dbs_mutex. If any function that can potentially take cpu_hotplug lock - * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then - * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock - * is recursive for the same process. -Venki - * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it - * would deadlock with cancel_delayed_work_sync(), which is needed for proper - * raceless workqueue teardown. + * dbs_mutex protects data in dbs_tuners_ins from concurrent changes on + * different CPUs. It protects dbs_enable in governor start/stop. */ static DEFINE_MUTEX(dbs_mutex); @@ -192,13 +190,18 @@ static unsigned int powersave_bias_target(struct cpufreq_policy *policy, return freq_hi; } +static void ondemand_powersave_bias_init_cpu(int cpu) +{ + struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); + dbs_info->freq_table = cpufreq_frequency_get_table(cpu); + dbs_info->freq_lo = 0; +} + static void ondemand_powersave_bias_init(void) { int i; for_each_online_cpu(i) { - struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i); - dbs_info->freq_table = cpufreq_frequency_get_table(i); - dbs_info->freq_lo = 0; + ondemand_powersave_bias_init_cpu(i); } } @@ -240,12 +243,10 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused, unsigned int input; int ret; ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; mutex_lock(&dbs_mutex); - if (ret != 1) { - mutex_unlock(&dbs_mutex); - return -EINVAL; - } dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate); mutex_unlock(&dbs_mutex); @@ -259,13 +260,12 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, int ret; ret = sscanf(buf, "%u", &input); - mutex_lock(&dbs_mutex); if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || input < MIN_FREQUENCY_UP_THRESHOLD) { - mutex_unlock(&dbs_mutex); return -EINVAL; } + mutex_lock(&dbs_mutex); dbs_tuners_ins.up_threshold = input; mutex_unlock(&dbs_mutex); @@ -363,9 +363,6 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) struct cpufreq_policy *policy; unsigned int j; - if (!this_dbs_info->enable) - return; - this_dbs_info->freq_lo = 0; policy = this_dbs_info->cur_policy; @@ -493,14 +490,7 @@ static void do_dbs_timer(struct work_struct *work) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - - if (lock_policy_rwsem_write(cpu) < 0) - return; - - if (!dbs_info->enable) { - unlock_policy_rwsem_write(cpu); - return; - } + mutex_lock(&dbs_info->timer_mutex); /* Common NORMAL_SAMPLE setup */ dbs_info->sample_type = DBS_NORMAL_SAMPLE; @@ -517,7 +507,7 @@ static void do_dbs_timer(struct work_struct *work) dbs_info->freq_lo, CPUFREQ_RELATION_H); } queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); - unlock_policy_rwsem_write(cpu); + mutex_unlock(&dbs_info->timer_mutex); } static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) @@ -526,8 +516,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); delay -= jiffies % delay; - dbs_info->enable = 1; - ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, @@ -536,7 +524,6 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { - dbs_info->enable = 0; cancel_delayed_work_sync(&dbs_info->work); } @@ -555,19 +542,15 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, if ((!cpu_online(cpu)) || (!policy->cur)) return -EINVAL; - if (this_dbs_info->enable) /* Already enabled */ - break; - mutex_lock(&dbs_mutex); - dbs_enable++; rc = sysfs_create_group(&policy->kobj, &dbs_attr_group); if (rc) { - dbs_enable--; mutex_unlock(&dbs_mutex); return rc; } + dbs_enable++; for_each_cpu(j, policy->cpus) { struct cpu_dbs_info_s *j_dbs_info; j_dbs_info = &per_cpu(cpu_dbs_info, j); @@ -581,6 +564,8 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, } } this_dbs_info->cpu = cpu; + ondemand_powersave_bias_init_cpu(cpu); + mutex_init(&this_dbs_info->timer_mutex); /* * Start the timerschedule work, when this governor * is used for first time @@ -598,29 +583,31 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, max(min_sampling_rate, latency * LATENCY_MULTIPLIER); } - dbs_timer_init(this_dbs_info); - mutex_unlock(&dbs_mutex); + + dbs_timer_init(this_dbs_info); break; case CPUFREQ_GOV_STOP: - mutex_lock(&dbs_mutex); dbs_timer_exit(this_dbs_info); + + mutex_lock(&dbs_mutex); sysfs_remove_group(&policy->kobj, &dbs_attr_group); + mutex_destroy(&this_dbs_info->timer_mutex); dbs_enable--; mutex_unlock(&dbs_mutex); break; case CPUFREQ_GOV_LIMITS: - mutex_lock(&dbs_mutex); + mutex_lock(&this_dbs_info->timer_mutex); if (policy->max < this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->max, CPUFREQ_RELATION_H); else if (policy->min > this_dbs_info->cur_policy->cur) __cpufreq_driver_target(this_dbs_info->cur_policy, policy->min, CPUFREQ_RELATION_L); - mutex_unlock(&dbs_mutex); + mutex_unlock(&this_dbs_info->timer_mutex); break; } return 0; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a6f73f1e99d9..3da9cfa31848 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -1090,6 +1090,8 @@ int drm_helper_resume_force_mode(struct drm_device *dev) if (ret == false) DRM_ERROR("failed to set mode on crtc %p\n", crtc); } + /* disable the unused connectors while restoring the modesetting */ + drm_helper_disable_unused_functions(dev); return 0; } EXPORT_SYMBOL(drm_helper_resume_force_mode); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index f112c769d533..8c4783180bf6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -846,7 +846,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data, return 0; } - printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr); + DRM_DEBUG("set status page addr 0x%08x\n", (u32)hws->addr); dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12); @@ -885,8 +885,8 @@ static int i915_set_status_page(struct drm_device *dev, void *data, * some RAM for the framebuffer at early boot. This code figures out * how much was set aside so we can use it for our own purposes. */ -static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size, - unsigned long *preallocated_size) +static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size, + uint32_t *preallocated_size) { struct pci_dev *bridge_dev; u16 tmp = 0; @@ -984,10 +984,11 @@ static int i915_probe_agp(struct drm_device *dev, unsigned long *aperture_size, return 0; } -static int i915_load_modeset_init(struct drm_device *dev) +static int i915_load_modeset_init(struct drm_device *dev, + unsigned long prealloc_size, + unsigned long agp_size) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long agp_size, prealloc_size; int fb_bar = IS_I9XX(dev) ? 2 : 0; int ret = 0; @@ -1002,10 +1003,6 @@ static int i915_load_modeset_init(struct drm_device *dev) if (IS_I965G(dev) || IS_G33(dev)) dev_priv->cursor_needs_physical = false; - ret = i915_probe_agp(dev, &agp_size, &prealloc_size); - if (ret) - goto out; - /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); @@ -1082,6 +1079,44 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master) master->driver_priv = NULL; } +static void i915_get_mem_freq(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + u32 tmp; + + if (!IS_IGD(dev)) + return; + + tmp = I915_READ(CLKCFG); + + switch (tmp & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_533: + dev_priv->fsb_freq = 533; /* 133*4 */ + break; + case CLKCFG_FSB_800: + dev_priv->fsb_freq = 800; /* 200*4 */ + break; + case CLKCFG_FSB_667: + dev_priv->fsb_freq = 667; /* 167*4 */ + break; + case CLKCFG_FSB_400: + dev_priv->fsb_freq = 400; /* 100*4 */ + break; + } + + switch (tmp & CLKCFG_MEM_MASK) { + case CLKCFG_MEM_533: + dev_priv->mem_freq = 533; + break; + case CLKCFG_MEM_667: + dev_priv->mem_freq = 667; + break; + case CLKCFG_MEM_800: + dev_priv->mem_freq = 800; + break; + } +} + /** * i915_driver_load - setup chip and create an initial config * @dev: DRM device @@ -1098,6 +1133,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) struct drm_i915_private *dev_priv = dev->dev_private; resource_size_t base, size; int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1; + uint32_t agp_size, prealloc_size; /* i915 has 4 more counters */ dev->counters += 4; @@ -1146,9 +1182,22 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) "performance may suffer.\n"); } + ret = i915_probe_agp(dev, &agp_size, &prealloc_size); + if (ret) + goto out_iomapfree; + /* enable GEM by default */ dev_priv->has_gem = 1; + if (prealloc_size > agp_size * 3 / 4) { + DRM_ERROR("Detected broken video BIOS with %d/%dkB of video " + "memory stolen.\n", + prealloc_size / 1024, agp_size / 1024); + DRM_ERROR("Disabling GEM. (try reducing stolen memory or " + "updating the BIOS to fix).\n"); + dev_priv->has_gem = 0; + } + dev->driver->get_vblank_counter = i915_get_vblank_counter; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ if (IS_G4X(dev) || IS_IGDNG(dev)) { @@ -1165,6 +1214,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) goto out_iomapfree; } + i915_get_mem_freq(dev); + /* On the 945G/GM, the chipset reports the MSI capability on the * integrated graphics even though the support isn't actually there * according to the published specs. It doesn't appear to function @@ -1180,6 +1231,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) pci_enable_msi(dev->pdev); spin_lock_init(&dev_priv->user_irq_lock); + spin_lock_init(&dev_priv->error_lock); dev_priv->user_irq_refcount = 0; ret = drm_vblank_init(dev, I915_NUM_PIPE); @@ -1190,7 +1242,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - ret = i915_load_modeset_init(dev); + ret = i915_load_modeset_init(dev, prealloc_size, agp_size); if (ret < 0) { DRM_ERROR("failed to init modeset\n"); goto out_rmmap; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index e3cb4025e323..fc4b68aa2d05 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -35,6 +35,7 @@ #include "drm_pciids.h" #include <linux/console.h> +#include "drm_crtc_helper.h" static unsigned int i915_modeset = -1; module_param_named(modeset, i915_modeset, int, 0400); @@ -57,8 +58,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) struct drm_i915_private *dev_priv = dev->dev_private; if (!dev || !dev_priv) { - printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv); - printk(KERN_ERR "DRM not initialized, aborting suspend.\n"); + DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv); + DRM_ERROR("DRM not initialized, aborting suspend.\n"); return -ENODEV; } @@ -115,6 +116,10 @@ static int i915_resume(struct drm_device *dev) drm_irq_install(dev); } + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Resume the modeset for every activated CRTC */ + drm_helper_resume_force_mode(dev); + } return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index bb4c2d387b6c..d08752875885 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -133,6 +133,22 @@ struct sdvo_device_mapping { u8 initialized; }; +struct drm_i915_error_state { + u32 eir; + u32 pgtbl_er; + u32 pipeastat; + u32 pipebstat; + u32 ipeir; + u32 ipehr; + u32 instdone; + u32 acthd; + u32 instpm; + u32 instps; + u32 instdone1; + u32 seqno; + struct timeval time; +}; + typedef struct drm_i915_private { struct drm_device *dev; @@ -209,6 +225,11 @@ typedef struct drm_i915_private { int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ int num_fence_regs; /* 8 on pre-965, 16 otherwise */ + unsigned int fsb_freq, mem_freq; + + spinlock_t error_lock; + struct drm_i915_error_state *first_error; + /* Register state */ u8 saveLBB; u32 saveDSPACNTR; @@ -468,9 +489,6 @@ struct drm_i915_gem_object { */ int fence_reg; - /** Boolean whether this object has a valid gtt offset. */ - int gtt_bound; - /** How many users have pinned this object in GTT space */ int pin_count; @@ -655,6 +673,7 @@ void i915_gem_free_object(struct drm_gem_object *obj); int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment); void i915_gem_object_unpin(struct drm_gem_object *obj); int i915_gem_object_unbind(struct drm_gem_object *obj); +void i915_gem_release_mmap(struct drm_gem_object *obj); void i915_gem_lastclose(struct drm_device *dev); uint32_t i915_get_gem_seqno(struct drm_device *dev); int i915_gem_object_get_fence_reg(struct drm_gem_object *obj); @@ -870,6 +889,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev)) +/* dsparb controlled by hw only */ +#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 876b65cb7629..5bf420378b6d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1252,6 +1252,31 @@ out_free_list: return ret; } +/** + * i915_gem_release_mmap - remove physical page mappings + * @obj: obj in question + * + * Preserve the reservation of the mmaping with the DRM core code, but + * relinquish ownership of the pages back to the system. + * + * It is vital that we remove the page mapping if we have mapped a tiled + * object through the GTT and then lose the fence register due to + * resource pressure. Similarly if the object has been moved out of the + * aperture, than pages mapped into userspace must be revoked. Removing the + * mapping will then trigger a page fault on the next user access, allowing + * fixup by i915_gem_fault(). + */ +void +i915_gem_release_mmap(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + if (dev->dev_mapping) + unmap_mapping_range(dev->dev_mapping, + obj_priv->mmap_offset, obj->size, 1); +} + static void i915_gem_free_mmap_offset(struct drm_gem_object *obj) { @@ -1861,7 +1886,6 @@ i915_gem_object_unbind(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - loff_t offset; int ret = 0; #if WATCH_BUF @@ -1898,9 +1922,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj) BUG_ON(obj_priv->active); /* blow away mappings if mapped through GTT */ - offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT; - if (dev->dev_mapping) - unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1); + i915_gem_release_mmap(obj); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) i915_gem_clear_fence_reg(obj); @@ -2222,7 +2244,6 @@ try_again: /* None available, try to steal one or wait for a user to finish */ if (i == dev_priv->num_fence_regs) { uint32_t seqno = dev_priv->mm.next_gem_seqno; - loff_t offset; if (avail == 0) return -ENOSPC; @@ -2274,10 +2295,7 @@ try_again: * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. */ - offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT; - if (dev->dev_mapping) - unmap_mapping_range(dev->dev_mapping, offset, - reg->obj->size, 1); + i915_gem_release_mmap(reg->obj); old_obj_priv->fence_reg = I915_FENCE_REG_NONE; } diff --git a/drivers/gpu/drm/i915/i915_gem_debugfs.c b/drivers/gpu/drm/i915/i915_gem_debugfs.c index 28146e405e87..9a44bfcb8139 100644 --- a/drivers/gpu/drm/i915/i915_gem_debugfs.c +++ b/drivers/gpu/drm/i915/i915_gem_debugfs.c @@ -75,11 +75,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) case ACTIVE_LIST: seq_printf(m, "Active:\n"); lock = &dev_priv->mm.active_list_lock; - spin_lock(lock); head = &dev_priv->mm.active_list; break; case INACTIVE_LIST: - seq_printf(m, "Inctive:\n"); + seq_printf(m, "Inactive:\n"); head = &dev_priv->mm.inactive_list; break; case FLUSHING_LIST: @@ -91,6 +90,8 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) return 0; } + if (lock) + spin_lock(lock); list_for_each_entry(obj_priv, head, list) { struct drm_gem_object *obj = obj_priv->obj; @@ -104,7 +105,10 @@ static int i915_gem_object_list_info(struct seq_file *m, void *data) if (obj->name) seq_printf(m, " (name: %d)", obj->name); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) - seq_printf(m, " (fence: %d)\n", obj_priv->fence_reg); + seq_printf(m, " (fence: %d)", obj_priv->fence_reg); + if (obj_priv->gtt_space != NULL) + seq_printf(m, " (gtt_offset: %08x)", obj_priv->gtt_offset); + seq_printf(m, "\n"); } @@ -323,6 +327,39 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) return 0; } +static int i915_error_state(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (!dev_priv->first_error) { + seq_printf(m, "no error state collected\n"); + goto out; + } + + error = dev_priv->first_error; + + seq_printf(m, "EIR: 0x%08x\n", error->eir); + seq_printf(m, " PGTBL_ER: 0x%08x\n", error->pgtbl_er); + seq_printf(m, " INSTPM: 0x%08x\n", error->instpm); + seq_printf(m, " IPEIR: 0x%08x\n", error->ipeir); + seq_printf(m, " IPEHR: 0x%08x\n", error->ipehr); + seq_printf(m, " INSTDONE: 0x%08x\n", error->instdone); + seq_printf(m, " ACTHD: 0x%08x\n", error->acthd); + if (IS_I965G(dev)) { + seq_printf(m, " INSTPS: 0x%08x\n", error->instps); + seq_printf(m, " INSTDONE1: 0x%08x\n", error->instdone1); + } + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); + + return 0; +} static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST}, @@ -336,6 +373,7 @@ static struct drm_info_list i915_gem_debugfs_list[] = { {"i915_ringbuffer_data", i915_ringbuffer_data, 0}, {"i915_ringbuffer_info", i915_ringbuffer_info, 0}, {"i915_batchbuffers", i915_batchbuffer_info, 0}, + {"i915_error_state", i915_error_state, 0}, }; #define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index daeae62e1c28..a2d527b22ec4 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -521,6 +521,12 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, goto err; } + /* If we've changed tiling, GTT-mappings of the object + * need to re-fault to ensure that the correct fence register + * setup is in place. + */ + i915_gem_release_mmap(obj); + obj_priv->tiling_mode = args->tiling_mode; obj_priv->stride = args->stride; } diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 228546f6eaa4..7ba23a69a0c0 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -26,6 +26,7 @@ * */ +#include <linux/sysrq.h> #include "drmP.h" #include "drm.h" #include "i915_drm.h" @@ -41,9 +42,10 @@ * we leave them always unmasked in IMR and then control enabling them through * PIPESTAT alone. */ -#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | \ + I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) /** Interrupts that we mask and unmask at runtime. */ #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) @@ -288,6 +290,47 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) return ret; } +static void i915_capture_error_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_i915_error_state *error; + unsigned long flags; + + spin_lock_irqsave(&dev_priv->error_lock, flags); + if (dev_priv->first_error) + goto out; + + error = kmalloc(sizeof(*error), GFP_ATOMIC); + if (!error) { + DRM_DEBUG("out ot memory, not capturing error state\n"); + goto out; + } + + error->eir = I915_READ(EIR); + error->pgtbl_er = I915_READ(PGTBL_ER); + error->pipeastat = I915_READ(PIPEASTAT); + error->pipebstat = I915_READ(PIPEBSTAT); + error->instpm = I915_READ(INSTPM); + if (!IS_I965G(dev)) { + error->ipeir = I915_READ(IPEIR); + error->ipehr = I915_READ(IPEHR); + error->instdone = I915_READ(INSTDONE); + error->acthd = I915_READ(ACTHD); + } else { + error->ipeir = I915_READ(IPEIR_I965); + error->ipehr = I915_READ(IPEHR_I965); + error->instdone = I915_READ(INSTDONE_I965); + error->instps = I915_READ(INSTPS); + error->instdone1 = I915_READ(INSTDONE1); + error->acthd = I915_READ(ACTHD_I965); + } + + dev_priv->first_error = error; + +out: + spin_unlock_irqrestore(&dev_priv->error_lock, flags); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -333,11 +376,15 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) * Clear the PIPE(A|B)STAT regs before the IIR */ if (pipea_stats & 0x8000ffff) { + if (pipea_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe a underrun\n"); I915_WRITE(PIPEASTAT, pipea_stats); irq_received = 1; } if (pipeb_stats & 0x8000ffff) { + if (pipeb_stats & PIPE_FIFO_UNDERRUN_STATUS) + DRM_DEBUG("pipe b underrun\n"); I915_WRITE(PIPEBSTAT, pipeb_stats); irq_received = 1; } @@ -362,6 +409,80 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) I915_READ(PORT_HOTPLUG_STAT); } + if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT) { + u32 eir = I915_READ(EIR); + + i915_capture_error_state(dev); + + printk(KERN_ERR "render error detected, EIR: 0x%08x\n", + eir); + if (eir & I915_ERROR_PAGE_TABLE) { + u32 pgtbl_err = I915_READ(PGTBL_ER); + printk(KERN_ERR "page table error\n"); + printk(KERN_ERR " PGTBL_ER: 0x%08x\n", + pgtbl_err); + I915_WRITE(PGTBL_ER, pgtbl_err); + (void)I915_READ(PGTBL_ER); + } + if (eir & I915_ERROR_MEMORY_REFRESH) { + printk(KERN_ERR "memory refresh error\n"); + printk(KERN_ERR "PIPEASTAT: 0x%08x\n", + pipea_stats); + printk(KERN_ERR "PIPEBSTAT: 0x%08x\n", + pipeb_stats); + /* pipestat has already been acked */ + } + if (eir & I915_ERROR_INSTRUCTION) { + printk(KERN_ERR "instruction error\n"); + printk(KERN_ERR " INSTPM: 0x%08x\n", + I915_READ(INSTPM)); + if (!IS_I965G(dev)) { + u32 ipeir = I915_READ(IPEIR); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD)); + I915_WRITE(IPEIR, ipeir); + (void)I915_READ(IPEIR); + } else { + u32 ipeir = I915_READ(IPEIR_I965); + + printk(KERN_ERR " IPEIR: 0x%08x\n", + I915_READ(IPEIR_I965)); + printk(KERN_ERR " IPEHR: 0x%08x\n", + I915_READ(IPEHR_I965)); + printk(KERN_ERR " INSTDONE: 0x%08x\n", + I915_READ(INSTDONE_I965)); + printk(KERN_ERR " INSTPS: 0x%08x\n", + I915_READ(INSTPS)); + printk(KERN_ERR " INSTDONE1: 0x%08x\n", + I915_READ(INSTDONE1)); + printk(KERN_ERR " ACTHD: 0x%08x\n", + I915_READ(ACTHD_I965)); + I915_WRITE(IPEIR_I965, ipeir); + (void)I915_READ(IPEIR_I965); + } + } + + I915_WRITE(EIR, eir); + (void)I915_READ(EIR); + eir = I915_READ(EIR); + if (eir) { + /* + * some errors might have become stuck, + * mask them. + */ + DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir); + I915_WRITE(EMR, I915_READ(EMR) | eir); + I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT); + } + } + I915_WRITE(IIR, iir); new_iir = I915_READ(IIR); /* Flush posted writes */ @@ -732,6 +853,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; + u32 error_mask; DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); @@ -768,6 +890,21 @@ int i915_driver_irq_postinstall(struct drm_device *dev) i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT); } + /* + * Enable some error detection, note the instruction error mask + * bit is reserved, so we leave it masked. + */ + if (IS_G4X(dev)) { + error_mask = ~(GM45_ERROR_PAGE_TABLE | + GM45_ERROR_MEM_PRIV | + GM45_ERROR_CP_PRIV | + I915_ERROR_MEMORY_REFRESH); + } else { + error_mask = ~(I915_ERROR_PAGE_TABLE | + I915_ERROR_MEMORY_REFRESH); + } + I915_WRITE(EMR, error_mask); + /* Disable pipe interrupt enables, clear pending pipe status */ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 88bf7521405f..6c0858484094 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -206,6 +206,7 @@ /* * Instruction and interrupt control regs */ +#define PGTBL_ER 0x02024 #define PRB0_TAIL 0x02030 #define PRB0_HEAD 0x02034 #define PRB0_START 0x02038 @@ -226,11 +227,18 @@ #define PRB1_HEAD 0x02044 /* 915+ only */ #define PRB1_START 0x02048 /* 915+ only */ #define PRB1_CTL 0x0204c /* 915+ only */ +#define IPEIR_I965 0x02064 +#define IPEHR_I965 0x02068 +#define INSTDONE_I965 0x0206c +#define INSTPS 0x02070 /* 965+ only */ +#define INSTDONE1 0x0207c /* 965+ only */ #define ACTHD_I965 0x02074 #define HWS_PGA 0x02080 #define HWS_ADDRESS_MASK 0xfffff000 #define HWS_START_ADDRESS_SHIFT 4 #define IPEIR 0x02088 +#define IPEHR 0x0208c +#define INSTDONE 0x02090 #define NOPID 0x02094 #define HWSTAM 0x02098 #define SCPD0 0x0209c /* 915+ only */ @@ -258,10 +266,22 @@ #define EIR 0x020b0 #define EMR 0x020b4 #define ESR 0x020b8 +#define GM45_ERROR_PAGE_TABLE (1<<5) +#define GM45_ERROR_MEM_PRIV (1<<4) +#define I915_ERROR_PAGE_TABLE (1<<4) +#define GM45_ERROR_CP_PRIV (1<<3) +#define I915_ERROR_MEMORY_REFRESH (1<<1) +#define I915_ERROR_INSTRUCTION (1<<0) #define INSTPM 0x020c0 #define ACTHD 0x020c8 #define FW_BLC 0x020d8 +#define FW_BLC2 0x020dc #define FW_BLC_SELF 0x020e0 /* 915+ only */ +#define FW_BLC_SELF_EN (1<<15) +#define MM_BURST_LENGTH 0x00700000 +#define MM_FIFO_WATERMARK 0x0001F000 +#define LM_BURST_LENGTH 0x00000700 +#define LM_FIFO_WATERMARK 0x0000001F #define MI_ARB_STATE 0x020e4 /* 915+ only */ #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_MASK_SHIFT 16 @@ -571,17 +591,21 @@ /* Clocking configuration register */ #define CLKCFG 0x10c00 -#define CLKCFG_FSB_400 (0 << 0) /* hrawclk 100 */ +#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ #define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* this is a guess, could be 5 as well */ +/* Note, below two are guess */ #define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (5 << 0) /* hrawclk 400 */ +#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ #define CLKCFG_FSB_MASK (7 << 0) - +#define CLKCFG_MEM_533 (1 << 4) +#define CLKCFG_MEM_667 (2 << 4) +#define CLKCFG_MEM_800 (3 << 4) +#define CLKCFG_MEM_MASK (7 << 4) + /** GM965 GM45 render standby register */ #define MCHBAR_RENDER_STANDBY 0x111B8 @@ -1581,6 +1605,34 @@ #define DSPARB_CSTART_SHIFT 7 #define DSPARB_BSTART_MASK (0x7f) #define DSPARB_BSTART_SHIFT 0 +#define DSPARB_BEND_SHIFT 9 /* on 855 */ +#define DSPARB_AEND_SHIFT 0 + +#define DSPFW1 0x70034 +#define DSPFW2 0x70038 +#define DSPFW3 0x7003c +#define IGD_SELF_REFRESH_EN (1<<30) + +/* FIFO watermark sizes etc */ +#define I915_FIFO_LINE_SIZE 64 +#define I830_FIFO_LINE_SIZE 32 +#define I945_FIFO_SIZE 127 /* 945 & 965 */ +#define I915_FIFO_SIZE 95 +#define I855GM_FIFO_SIZE 255 +#define I830_FIFO_SIZE 95 +#define I915_MAX_WM 0x3f + +#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ +#define IGD_FIFO_LINE_SIZE 64 +#define IGD_MAX_WM 0x1ff +#define IGD_DFT_WM 0x3f +#define IGD_DFT_HPLLOFF_WM 0 +#define IGD_GUARD_WM 10 +#define IGD_CURSOR_FIFO 64 +#define IGD_CURSOR_MAX_WM 0x3f +#define IGD_CURSOR_DFT_WM 0 +#define IGD_CURSOR_GUARD_WM 5 + /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 8d8e083d14ab..9e1d16e5c3ea 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -222,23 +222,12 @@ static void i915_restore_vga(struct drm_device *dev) I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK); } -int i915_save_state(struct drm_device *dev) +static void i915_save_modeset_reg(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - int i; - - pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); - - /* Render Standby */ - if (IS_I965G(dev) && IS_MOBILE(dev)) - dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); - - /* Hardware status page */ - dev_priv->saveHWS = I915_READ(HWS_PGA); - - /* Display arbitration control */ - dev_priv->saveDSPARB = I915_READ(DSPARB); + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); @@ -294,7 +283,122 @@ int i915_save_state(struct drm_device *dev) } i915_save_palette(dev, PIPE_B); dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT); + return; +} +static void i915_restore_modeset_reg(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (drm_core_check_feature(dev, DRIVER_MODESET)) + return; + + /* Pipe & plane A info */ + /* Prime the clock */ + if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPA0, dev_priv->saveFPA0); + I915_WRITE(FPA1, dev_priv->saveFPA1); + /* Actually enable it */ + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); + I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); + I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); + I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); + I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); + I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + /* Restore plane info */ + I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); + I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); + I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); + I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); + I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); + I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); + } + + I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); + + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); + I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); + + /* Pipe & plane B info */ + if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPB0, dev_priv->saveFPB0); + I915_WRITE(FPB1, dev_priv->saveFPB1); + /* Actually enable it */ + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); + I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); + I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); + I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); + I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); + I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + /* Restore plane info */ + I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); + I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); + I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); + I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); + I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); + I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); + } + + I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); + + i915_restore_palette(dev, PIPE_B); + /* Enable the plane */ + I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); + I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + return; +} +int i915_save_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + + /* Hardware status page */ + dev_priv->saveHWS = I915_READ(HWS_PGA); + + /* Display arbitration control */ + dev_priv->saveDSPARB = I915_READ(DSPARB); + + /* This is only meaningful in non-KMS mode */ + /* Don't save them in KMS mode */ + i915_save_modeset_reg(dev); /* Cursor state */ dev_priv->saveCURACNTR = I915_READ(CURACNTR); dev_priv->saveCURAPOS = I915_READ(CURAPOS); @@ -430,92 +534,9 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); } - - /* Pipe & plane A info */ - /* Prime the clock */ - if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & - ~DPLL_VCO_ENABLE); - DRM_UDELAY(150); - } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); - /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); - DRM_UDELAY(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); - DRM_UDELAY(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); - I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); - I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); - I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); - I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); - I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); - - /* Restore plane info */ - I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); - I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); - I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); - I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); - I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); - I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); - } - - I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); - - i915_restore_palette(dev, PIPE_A); - /* Enable the plane */ - I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); - I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); - - /* Pipe & plane B info */ - if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & - ~DPLL_VCO_ENABLE); - DRM_UDELAY(150); - } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); - /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); - DRM_UDELAY(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); - DRM_UDELAY(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); - I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); - I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); - I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); - I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); - I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); - - /* Restore plane info */ - I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); - I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); - I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); - I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); - I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); - I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); - } - - I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); - - i915_restore_palette(dev, PIPE_B); - /* Enable the plane */ - I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); - I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); - + /* This is only meaningful in non-KMS mode */ + /* Don't restore them in KMS mode */ + i915_restore_modeset_reg(dev); /* Cursor state */ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS); I915_WRITE(CURACNTR, dev_priv->saveCURACNTR); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 716409a57244..7cc447191028 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -97,6 +97,7 @@ static void parse_lfp_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) { + struct drm_device *dev = dev_priv->dev; struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; @@ -132,7 +133,14 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, entry = (struct bdb_lvds_lfp_data_entry *) ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * lvds_options->panel_type)); - dvo_timing = &entry->dvo_timing; + + /* On IGDNG mobile, LVDS data block removes panel fitting registers. + So dec 2 dword from dvo_timing offset */ + if (IS_IGDNG(dev)) + dvo_timing = (struct lvds_dvo_timing *) + ((u8 *)&entry->dvo_timing - 8); + else + dvo_timing = &entry->dvo_timing; panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); @@ -195,10 +203,12 @@ parse_general_features(struct drm_i915_private *dev_priv, dev_priv->lvds_use_ssc = general->enable_ssc; if (dev_priv->lvds_use_ssc) { - if (IS_I855(dev_priv->dev)) - dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; - else - dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + if (IS_I85X(dev_priv->dev)) + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = + general->ssc_freq ? 100 : 96; } } } diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 6de97fc66029..d6a1a6e5539a 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -46,7 +46,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode) temp = I915_READ(reg); temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); - temp |= ADPA_DAC_ENABLE; + temp &= ~ADPA_DAC_ENABLE; switch(mode) { case DRM_MODE_DPMS_ON: @@ -428,8 +428,34 @@ static void intel_crt_destroy(struct drm_connector *connector) static int intel_crt_get_modes(struct drm_connector *connector) { + int ret; struct intel_output *intel_output = to_intel_output(connector); - return intel_ddc_get_modes(intel_output); + struct i2c_adapter *ddcbus; + struct drm_device *dev = connector->dev; + + + ret = intel_ddc_get_modes(intel_output); + if (ret || !IS_G4X(dev)) + goto end; + + ddcbus = intel_output->ddc_bus; + /* Try to probe digital port for output in DVI-I -> VGA mode. */ + intel_output->ddc_bus = + intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D"); + + if (!intel_output->ddc_bus) { + intel_output->ddc_bus = ddcbus; + dev_printk(KERN_ERR, &connector->dev->pdev->dev, + "DDC bus registration failed for CRTDDC_D.\n"); + goto end; + } + /* Try to get modes by GPIOD port */ + ret = intel_ddc_get_modes(intel_output); + intel_i2c_destroy(ddcbus); + +end: + return ret; + } static int intel_crt_set_property(struct drm_connector *connector, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 73e7b9cecac8..508838ee31e0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -25,6 +25,7 @@ */ #include <linux/i2c.h> +#include <linux/kernel.h> #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" @@ -34,6 +35,7 @@ #include "drm_crtc_helper.h" bool intel_pipe_has_type (struct drm_crtc *crtc, int type); +static void intel_update_watermarks(struct drm_device *dev); typedef struct { /* given values */ @@ -814,24 +816,21 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, { intel_clock_t clock; if (target < 200000) { - clock.dot = 161670; - clock.p = 20; clock.p1 = 2; clock.p2 = 10; - clock.n = 0x01; - clock.m = 97; - clock.m1 = 0x10; - clock.m2 = 0x05; + clock.n = 2; + clock.m1 = 23; + clock.m2 = 8; } else { - clock.dot = 270000; - clock.p = 10; clock.p1 = 1; clock.p2 = 10; - clock.n = 0x02; - clock.m = 108; - clock.m1 = 0x12; - clock.m2 = 0x06; + clock.n = 1; + clock.m1 = 14; + clock.m2 = 2; } + clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); + clock.p = (clock.p1 * clock.p2); + clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } @@ -1005,7 +1004,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->pipe; + int plane = intel_crtc->plane; int pch_dpll_reg = (pipe == 0) ? PCH_DPLL_A : PCH_DPLL_B; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; @@ -1335,8 +1334,10 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO + intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: + intel_update_watermarks(dev); /* Give the overlay scaler a chance to disable if it's on this pipe */ //intel_crtc_dpms_video(crtc, FALSE); TODO @@ -1515,7 +1516,6 @@ static int intel_get_core_clock_speed(struct drm_device *dev) return 0; /* Silence gcc warning */ } - /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use @@ -1574,7 +1574,7 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = (temp * bytes_per_pixel) / nlanes; + m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -1585,6 +1585,420 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, } +struct intel_watermark_params { + unsigned long fifo_size; + unsigned long max_wm; + unsigned long default_wm; + unsigned long guard_size; + unsigned long cacheline_size; +}; + +/* IGD has different values for various configs */ +static struct intel_watermark_params igd_display_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_display_hplloff_wm = { + IGD_DISPLAY_FIFO, + IGD_MAX_WM, + IGD_DFT_HPLLOFF_WM, + IGD_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params igd_cursor_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE, +}; +static struct intel_watermark_params igd_cursor_hplloff_wm = { + IGD_CURSOR_FIFO, + IGD_CURSOR_MAX_WM, + IGD_CURSOR_DFT_WM, + IGD_CURSOR_GUARD_WM, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i945_wm_info = { + I915_FIFO_LINE_SIZE, + I915_MAX_WM, + 1, + 0, + IGD_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i915_wm_info = { + I945_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I915_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i855_wm_info = { + I855GM_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; +static struct intel_watermark_params i830_wm_info = { + I830_FIFO_SIZE, + I915_MAX_WM, + 1, + 0, + I830_FIFO_LINE_SIZE +}; + +static unsigned long intel_calculate_wm(unsigned long clock_in_khz, + struct intel_watermark_params *wm, + int pixel_size, + unsigned long latency_ns) +{ + unsigned long bytes_required, wm_size; + + bytes_required = (clock_in_khz * pixel_size * latency_ns) / 1000000; + bytes_required /= wm->cacheline_size; + wm_size = wm->fifo_size - bytes_required - wm->guard_size; + + if (wm_size > wm->max_wm) + wm_size = wm->max_wm; + if (wm_size == 0) + wm_size = wm->default_wm; + return wm_size; +} + +struct cxsr_latency { + int is_desktop; + unsigned long fsb_freq; + unsigned long mem_freq; + unsigned long display_sr; + unsigned long display_hpll_disable; + unsigned long cursor_sr; + unsigned long cursor_hpll_disable; +}; + +static struct cxsr_latency cxsr_latency_table[] = { + {1, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ + {1, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ + {1, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ + + {1, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ + {1, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ + {1, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ + + {1, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ + {1, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ + {1, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ + + {0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ + {0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ + {0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ + + {0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ + {0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ + {0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ + + {0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ + {0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ + {0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ +}; + +static struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int fsb, + int mem) +{ + int i; + struct cxsr_latency *latency; + + if (fsb == 0 || mem == 0) + return NULL; + + for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { + latency = &cxsr_latency_table[i]; + if (is_desktop == latency->is_desktop && + fsb == latency->fsb_freq && mem == latency->mem_freq) + break; + } + if (i >= ARRAY_SIZE(cxsr_latency_table)) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + return NULL; + } + return latency; +} + +static void igd_disable_cxsr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + + /* deactivate cxsr */ + reg = I915_READ(DSPFW3); + reg &= ~(IGD_SELF_REFRESH_EN); + I915_WRITE(DSPFW3, reg); + DRM_INFO("Big FIFO is disabled\n"); +} + +static void igd_enable_cxsr(struct drm_device *dev, unsigned long clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg; + unsigned long wm; + struct cxsr_latency *latency; + + latency = intel_get_cxsr_latency(IS_IGDG(dev), dev_priv->fsb_freq, + dev_priv->mem_freq); + if (!latency) { + DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n"); + igd_disable_cxsr(dev); + return; + } + + /* Display SR */ + wm = intel_calculate_wm(clock, &igd_display_wm, pixel_size, + latency->display_sr); + reg = I915_READ(DSPFW1); + reg &= 0x7fffff; + reg |= wm << 23; + I915_WRITE(DSPFW1, reg); + DRM_DEBUG("DSPFW1 register is %x\n", reg); + + /* cursor SR */ + wm = intel_calculate_wm(clock, &igd_cursor_wm, pixel_size, + latency->cursor_sr); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 24); + reg |= (wm & 0x3f) << 24; + I915_WRITE(DSPFW3, reg); + + /* Display HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_display_hplloff_wm, + latency->display_hpll_disable, I915_FIFO_LINE_SIZE); + reg = I915_READ(DSPFW3); + reg &= 0xfffffe00; + reg |= wm & 0x1ff; + I915_WRITE(DSPFW3, reg); + + /* cursor HPLL off SR */ + wm = intel_calculate_wm(clock, &igd_cursor_hplloff_wm, pixel_size, + latency->cursor_hpll_disable); + reg = I915_READ(DSPFW3); + reg &= ~(0x3f << 16); + reg |= (wm & 0x3f) << 16; + I915_WRITE(DSPFW3, reg); + DRM_DEBUG("DSPFW3 register is %x\n", reg); + + /* activate cxsr */ + reg = I915_READ(DSPFW3); + reg |= IGD_SELF_REFRESH_EN; + I915_WRITE(DSPFW3, reg); + + DRM_INFO("Big FIFO is enabled\n"); + + return; +} + +const static int latency_ns = 5000; /* default for non-igd platforms */ + + +static void i965_update_wm(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + DRM_DEBUG("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 8\n"); + + /* 965 has limitations... */ + I915_WRITE(DSPFW1, (8 << 16) | (8 << 8) | (8 << 0)); + I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); +} + +static void i9xx_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + uint32_t fwater_hi = I915_READ(FW_BLC2) & LM_FIFO_WATERMARK; + int bsize, asize, cwm, bwm = 1, awm = 1, srwm = 1; + uint32_t dsparb = I915_READ(DSPARB); + int planea_entries, planeb_entries; + struct intel_watermark_params *wm_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0; + + if (IS_I965GM(dev) || IS_I945GM(dev)) + wm_params = &i945_wm_info; + else if (IS_I9XX(dev)) + wm_params = &i915_wm_info; + else + wm_params = &i855_wm_info; + + planea_entries = intel_calculate_wm(planea_clock, wm_params, + pixel_size, latency_ns); + planeb_entries = intel_calculate_wm(planeb_clock, wm_params, + pixel_size, latency_ns); + + DRM_DEBUG("FIFO entries - A: %d, B: %d\n", planea_entries, + planeb_entries); + + if (IS_I9XX(dev)) { + asize = dsparb & 0x7f; + bsize = (dsparb >> DSPARB_CSTART_SHIFT) & 0x7f; + } else { + asize = dsparb & 0x1ff; + bsize = (dsparb >> DSPARB_BEND_SHIFT) & 0x1ff; + } + DRM_DEBUG("FIFO size - A: %d, B: %d\n", asize, bsize); + + /* Two extra entries for padding */ + awm = asize - (planea_entries + 2); + bwm = bsize - (planeb_entries + 2); + + /* Sanity check against potentially bad FIFO allocations */ + if (awm <= 0) { + /* pipe is on but has too few FIFO entries */ + if (planea_entries != 0) + DRM_DEBUG("plane A needs more FIFO entries\n"); + awm = 1; + } + if (bwm <= 0) { + if (planeb_entries != 0) + DRM_DEBUG("plane B needs more FIFO entries\n"); + bwm = 1; + } + + /* + * Overlay gets an aggressive default since video jitter is bad. + */ + cwm = 2; + + /* Calc sr entries for one pipe configs */ + if (!planea_clock || !planeb_clock) { + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = (sr_hdisplay * 1000) / sr_clock; + sr_entries = (((latency_ns / line_time_us) + 1) * pixel_size * + sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / wm_params->cacheline_size, 1); + if (sr_entries < wm_params->fifo_size) + srwm = wm_params->fifo_size - sr_entries; + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", + awm, bwm, cwm, srwm); + + fwater_lo = fwater_lo | ((bwm & 0x3f) << 16) | (awm & 0x3f); + fwater_hi = fwater_hi | (cwm & 0x1f); + + I915_WRITE(FW_BLC, fwater_lo); + I915_WRITE(FW_BLC2, fwater_hi); + if (IS_I9XX(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f)); +} + +static void i830_update_wm(struct drm_device *dev, int planea_clock, + int pixel_size) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dsparb = I915_READ(DSPARB); + uint32_t fwater_lo = I915_READ(FW_BLC) & MM_FIFO_WATERMARK; + unsigned int asize, awm; + int planea_entries; + + planea_entries = intel_calculate_wm(planea_clock, &i830_wm_info, + pixel_size, latency_ns); + + asize = dsparb & 0x7f; + + awm = asize - planea_entries; + + fwater_lo = fwater_lo | awm; + + I915_WRITE(FW_BLC, fwater_lo); +} + +/** + * intel_update_watermarks - update FIFO watermark values based on current modes + * + * Calculate watermark values for the various WM regs based on current mode + * and plane configuration. + * + * There are several cases to deal with here: + * - normal (i.e. non-self-refresh) + * - self-refresh (SR) mode + * - lines are large relative to FIFO size (buffer can hold up to 2) + * - lines are small relative to FIFO size (buffer can hold more than 2 + * lines), so need to account for TLB latency + * + * The normal calculation is: + * watermark = dotclock * bytes per pixel * latency + * where latency is platform & configuration dependent (we assume pessimal + * values here). + * + * The SR calculation is: + * watermark = (trunc(latency/line time)+1) * surface width * + * bytes per pixel + * where + * line time = htotal / dotclock + * and latency is assumed to be high, as above. + * + * The final value programmed to the register should always be rounded up, + * and include an extra 2 entries to account for clock crossings. + * + * We don't use the sprite, so we can ignore that. And on Crestline we have + * to set the non-SR watermarks to 8. + */ +static void intel_update_watermarks(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct intel_crtc *intel_crtc; + int sr_hdisplay = 0; + unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; + int enabled = 0, pixel_size = 0; + + if (DSPARB_HWCONTROL(dev)) + return; + + /* Get the clock config from both planes */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + intel_crtc = to_intel_crtc(crtc); + if (crtc->enabled) { + enabled++; + if (intel_crtc->plane == 0) { + DRM_DEBUG("plane A (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planea_clock = crtc->mode.clock; + } else { + DRM_DEBUG("plane B (pipe %d) clock: %d\n", + intel_crtc->pipe, crtc->mode.clock); + planeb_clock = crtc->mode.clock; + } + sr_hdisplay = crtc->mode.hdisplay; + sr_clock = crtc->mode.clock; + if (crtc->fb) + pixel_size = crtc->fb->bits_per_pixel / 8; + else + pixel_size = 4; /* by default */ + } + } + + if (enabled <= 0) + return; + + /* Single pipe configs can enable self refresh */ + if (enabled == 1 && IS_IGD(dev)) + igd_enable_cxsr(dev, sr_clock, pixel_size); + else if (IS_IGD(dev)) + igd_disable_cxsr(dev); + + if (IS_I965G(dev)) + i965_update_wm(dev); + else if (IS_I9XX(dev) || IS_MOBILE(dev)) + i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay, + pixel_size); + else + i830_update_wm(dev, planea_clock, pixel_size); +} + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -1951,6 +2365,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Flush the plane changes */ ret = intel_pipe_set_base(crtc, x, y, old_fb); + + intel_update_watermarks(dev); + drm_vblank_post_modeset(dev, pipe); return ret; @@ -2439,6 +2856,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); intel_crtc->pipe = pipe; + intel_crtc->plane = pipe; for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 8f8d37d5663a..6770ae88370d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -246,7 +246,7 @@ intel_dp_aux_ch(struct intel_output *intel_output, } if ((status & DP_AUX_CH_CTL_DONE) == 0) { - printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status); + DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); return -EBUSY; } @@ -254,11 +254,14 @@ intel_dp_aux_ch(struct intel_output *intel_output, * Timeouts occur when the sink is not connected */ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { - printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status); + DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); return -EIO; } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { - printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status); + DRM_DEBUG("dp_aux_ch timeout status 0x%08x\n", status); return -ETIMEDOUT; } @@ -411,7 +414,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, dp_priv->link_bw = bws[clock]; dp_priv->lane_count = lane_count; adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); - printk(KERN_ERR "link bw %02x lane count %d clock %d\n", + DRM_DEBUG("Display port link bw %02x lane count %d clock %d\n", dp_priv->link_bw, dp_priv->lane_count, adjusted_mode->clock); return true; diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c index 4e60f14b1a6d..a63b6f57d2d4 100644 --- a/drivers/gpu/drm/i915/intel_dp_i2c.c +++ b/drivers/gpu/drm/i915/intel_dp_i2c.c @@ -29,6 +29,7 @@ #include <linux/sched.h> #include <linux/i2c.h> #include "intel_dp.h" +#include "drmP.h" /* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ @@ -84,7 +85,7 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, msg, msg_bytes, reply, reply_bytes); if (ret < 0) { - printk(KERN_ERR "aux_ch failed %d\n", ret); + DRM_DEBUG("aux_ch failed %d\n", ret); return ret; } switch (reply[0] & AUX_I2C_REPLY_MASK) { @@ -94,14 +95,14 @@ i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, } return reply_bytes - 1; case AUX_I2C_REPLY_NACK: - printk(KERN_ERR "aux_ch nack\n"); + DRM_DEBUG("aux_ch nack\n"); return -EREMOTEIO; case AUX_I2C_REPLY_DEFER: - printk(KERN_ERR "aux_ch defer\n"); + DRM_DEBUG("aux_ch defer\n"); udelay(100); break; default: - printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]); + DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]); return -EREMOTEIO; } } @@ -223,7 +224,7 @@ i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, if (ret >= 0) ret = num; i2c_algo_dp_aux_stop(adapter, reading); - printk(KERN_ERR "dp_aux_xfer return %d\n", ret); + DRM_DEBUG("dp_aux_xfer return %d\n", ret); return ret; } diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 1af7d68e3807..1d30802e773e 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -453,7 +453,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, size = ALIGN(size, PAGE_SIZE); fbo = drm_gem_object_alloc(dev, size); if (!fbo) { - printk(KERN_ERR "failed to allocate framebuffer\n"); + DRM_ERROR("failed to allocate framebuffer\n"); ret = -ENOMEM; goto out; } @@ -610,8 +610,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, par->dev = dev; /* To allow resizeing without swapping buffers */ - printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width, - intel_fb->base.height, obj_priv->gtt_offset, fbo); + DRM_DEBUG("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width, + intel_fb->base.height, obj_priv->gtt_offset, fbo); mutex_unlock(&dev->struct_mutex); return 0; @@ -698,13 +698,13 @@ static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc * } else intelfb_set_par(info); - printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + DRM_INFO("fb%d: %s frame buffer device\n", info->node, info->fix.id); /* Switch back to kernel console on panic */ kernelfb_mode = *modeset; atomic_notifier_chain_register(&panic_notifier_list, &paniced); - printk(KERN_INFO "registered panic notifier\n"); + DRM_DEBUG("registered panic notifier\n"); return 0; } @@ -852,13 +852,13 @@ static int intelfb_single_fb_probe(struct drm_device *dev) } else intelfb_set_par(info); - printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, + DRM_INFO("fb%d: %s frame buffer device\n", info->node, info->fix.id); /* Switch back to kernel console on panic */ kernelfb_mode = *modeset; atomic_notifier_chain_register(&panic_notifier_list, &paniced); - printk(KERN_INFO "registered panic notifier\n"); + DRM_DEBUG("registered panic notifier\n"); return 0; } @@ -872,8 +872,8 @@ void intelfb_restore(void) { int ret; if ((ret = drm_crtc_helper_set_config(&kernelfb_mode)) != 0) { - printk(KERN_ERR "Failed to restore crtc configuration: %d\n", - ret); + DRM_ERROR("Failed to restore crtc configuration: %d\n", + ret); } } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 9564ca44a977..9ab38efffecf 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -36,6 +36,7 @@ #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" +#include <linux/acpi.h> #define I915_LVDS "i915_lvds" @@ -252,14 +253,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, /* Should never happen!! */ if (!IS_I965G(dev) && intel_crtc->pipe == 0) { - printk(KERN_ERR "Can't support LVDS on pipe A\n"); + DRM_ERROR("Can't support LVDS on pipe A\n"); return false; } /* Should never happen!! */ list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { - printk(KERN_ERR "Can't enable LVDS and another " + DRM_ERROR("Can't enable LVDS and another " "encoder on the same pipe\n"); return false; } @@ -788,6 +789,65 @@ static const struct dmi_system_id intel_no_lvds[] = { { } /* terminating entry */ }; +#ifdef CONFIG_ACPI +/* + * check_lid_device -- check whether @handle is an ACPI LID device. + * @handle: ACPI device handle + * @level : depth in the ACPI namespace tree + * @context: the number of LID device when we find the device + * @rv: a return value to fill if desired (Not use) + */ +static acpi_status +check_lid_device(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *acpi_dev; + int *lid_present = context; + + acpi_dev = NULL; + /* Get the acpi device for device handle */ + if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) { + /* If there is no ACPI device for handle, return */ + return AE_OK; + } + + if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7)) + *lid_present = 1; + + return AE_OK; +} + +/** + * check whether there exists the ACPI LID device by enumerating the ACPI + * device tree. + */ +static int intel_lid_present(void) +{ + int lid_present = 0; + + if (acpi_disabled) { + /* If ACPI is disabled, there is no ACPI device tree to + * check, so assume the LID device would have been present. + */ + return 1; + } + + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + check_lid_device, &lid_present, NULL); + + return lid_present; +} +#else +static int intel_lid_present(void) +{ + /* In the absence of ACPI built in, assume that the LID device would + * have been present. + */ + return 1; +} +#endif + /** * intel_lvds_init - setup LVDS connectors on this device * @dev: drm device @@ -811,6 +871,16 @@ void intel_lvds_init(struct drm_device *dev) if (dmi_check_system(intel_no_lvds)) return; + /* Assume that any device without an ACPI LID device also doesn't + * have an integrated LVDS. We would be better off parsing the BIOS + * to get a reliable indicator, but that code isn't written yet. + * + * In the case of all-in-one desktops using LVDS that we've seen, + * they're using SDVO LVDS. + */ + if (!intel_lid_present()) + return; + if (IS_IGDNG(dev)) { if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) return; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f03473779feb..4f0c30948bc4 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -68,12 +68,23 @@ struct intel_sdvo_priv { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; + /** * This is set if we detect output of sdvo device as LVDS. */ bool is_lvds; /** + * This is sdvo flags for input timing. + */ + uint8_t sdvo_flags; + + /** + * This is sdvo fixed pannel mode pointer + */ + struct drm_display_mode *sdvo_lvds_fixed_mode; + + /** * Returned SDTV resolutions allowed for the current format, if the * device reported it. */ @@ -592,6 +603,7 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output, uint16_t height) { struct intel_sdvo_preferred_input_timing_args args; + struct intel_sdvo_priv *sdvo_priv = output->dev_priv; uint8_t status; memset(&args, 0, sizeof(args)); @@ -599,7 +611,12 @@ intel_sdvo_create_preferred_input_timing(struct intel_output *output, args.width = width; args.height = height; args.interlace = 0; - args.scaled = 0; + + if (sdvo_priv->is_lvds && + (sdvo_priv->sdvo_lvds_fixed_mode->hdisplay != width || + sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height)) + args.scaled = 1; + intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, &args, sizeof(args)); status = intel_sdvo_read_response(output, NULL, 0); @@ -944,12 +961,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, struct intel_output *output = enc_to_intel_output(encoder); struct intel_sdvo_priv *dev_priv = output->dev_priv; - if (!dev_priv->is_tv) { - /* Make the CRTC code factor in the SDVO pixel multiplier. The - * SDVO device will be told of the multiplier during mode_set. - */ - adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); - } else { + if (dev_priv->is_tv) { struct intel_sdvo_dtd output_dtd; bool success; @@ -980,6 +992,47 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, intel_sdvo_get_preferred_input_timing(output, &input_dtd); intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags; + + drm_mode_set_crtcinfo(adjusted_mode, 0); + + mode->clock = adjusted_mode->clock; + + adjusted_mode->clock *= + intel_sdvo_get_pixel_multiplier(mode); + } else { + return false; + } + } else if (dev_priv->is_lvds) { + struct intel_sdvo_dtd output_dtd; + bool success; + + drm_mode_set_crtcinfo(dev_priv->sdvo_lvds_fixed_mode, 0); + /* Set output timings */ + intel_sdvo_get_dtd_from_mode(&output_dtd, + dev_priv->sdvo_lvds_fixed_mode); + + intel_sdvo_set_target_output(output, + dev_priv->controlled_output); + intel_sdvo_set_output_timing(output, &output_dtd); + + /* Set the input timing to the screen. Assume always input 0. */ + intel_sdvo_set_target_input(output, true, false); + + + success = intel_sdvo_create_preferred_input_timing( + output, + mode->clock / 10, + mode->hdisplay, + mode->vdisplay); + + if (success) { + struct intel_sdvo_dtd input_dtd; + + intel_sdvo_get_preferred_input_timing(output, + &input_dtd); + intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); + dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -990,6 +1043,12 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder, } else { return false; } + + } else { + /* Make the CRTC code factor in the SDVO pixel multiplier. The + * SDVO device will be told of the multiplier during mode_set. + */ + adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode); } return true; } @@ -1033,15 +1092,16 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* We have tried to get input timing in mode_fixup, and filled into adjusted_mode */ - if (sdvo_priv->is_tv) + if (sdvo_priv->is_tv || sdvo_priv->is_lvds) { intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); - else + input_dtd.part2.sdvo_flags = sdvo_priv->sdvo_flags; + } else intel_sdvo_get_dtd_from_mode(&input_dtd, mode); /* If it's a TV, we already set the output timing in mode_fixup. * Otherwise, the output timing is equal to the input timing. */ - if (!sdvo_priv->is_tv) { + if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) { /* Set the output timing to the screen */ intel_sdvo_set_target_output(output, sdvo_priv->controlled_output); @@ -1116,6 +1176,8 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT; } + if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL) + sdvox |= SDVO_STALL_SELECT; intel_sdvo_write_sdvox(output, sdvox); } @@ -1276,6 +1338,17 @@ static int intel_sdvo_mode_valid(struct drm_connector *connector, if (sdvo_priv->pixel_clock_max < mode->clock) return MODE_CLOCK_HIGH; + if (sdvo_priv->is_lvds == true) { + if (sdvo_priv->sdvo_lvds_fixed_mode == NULL) + return MODE_PANEL; + + if (mode->hdisplay > sdvo_priv->sdvo_lvds_fixed_mode->hdisplay) + return MODE_PANEL; + + if (mode->vdisplay > sdvo_priv->sdvo_lvds_fixed_mode->vdisplay) + return MODE_PANEL; + } + return MODE_OK; } @@ -1549,6 +1622,8 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct drm_display_mode *newmode; /* * Attempt to get the mode list from DDC. @@ -1557,11 +1632,10 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) */ intel_ddc_get_modes(intel_output); if (list_empty(&connector->probed_modes) == false) - return; + goto end; /* Fetch modes from VBT */ if (dev_priv->sdvo_lvds_vbt_mode != NULL) { - struct drm_display_mode *newmode; newmode = drm_mode_duplicate(connector->dev, dev_priv->sdvo_lvds_vbt_mode); if (newmode != NULL) { @@ -1571,6 +1645,16 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) drm_mode_probed_add(connector, newmode); } } + +end: + list_for_each_entry(newmode, &connector->probed_modes, head) { + if (newmode->type & DRM_MODE_TYPE_PREFERRED) { + sdvo_priv->sdvo_lvds_fixed_mode = + drm_mode_duplicate(connector->dev, newmode); + break; + } + } + } static int intel_sdvo_get_modes(struct drm_connector *connector) @@ -1593,14 +1677,20 @@ static int intel_sdvo_get_modes(struct drm_connector *connector) static void intel_sdvo_destroy(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; if (intel_output->i2c_bus) intel_i2c_destroy(intel_output->i2c_bus); if (intel_output->ddc_bus) intel_i2c_destroy(intel_output->ddc_bus); + if (sdvo_priv->sdvo_lvds_fixed_mode != NULL) + drm_mode_destroy(connector->dev, + sdvo_priv->sdvo_lvds_fixed_mode); + drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); + kfree(intel_output); } diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h index 193938b7d7f9..ba5cdf8ae40b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo_regs.h +++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h @@ -715,6 +715,7 @@ struct intel_sdvo_enhancements_arg { #define SDVO_HBUF_TX_ONCE (2 << 6) #define SDVO_HBUF_TX_VSYNC (3 << 6) #define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c +#define SDVO_NEED_TO_STALL (1 << 7) struct intel_sdvo_encode{ u8 dvi_rev; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index e4476743f203..b1bc6e277d2a 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -85,10 +85,11 @@ static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); - printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n" - KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" - KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" - KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", + printk(KERN_DEBUG + " cntl = 0x%02x, mdcntl = 0x%02x\n" + " sts = 0x%02x, extsts = 0x%02x\n" + " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" + " xtcntlss = 0x%02x, directcntl = 0x%02x\n", in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), in_8(&iic->xtcntlss), in_8(&iic->directcntl)); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9d8f796c6745..a6b989a9dc07 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD if INPUT_KEYBOARD +config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" + depends on MACH_AAED2000 + select INPUT_POLLDEV + default y + help + Say Y here to enable the keyboard on the Agilent AAED-2000 + development board. + + To compile this driver as a module, choose M here: the + module will be called aaed2000_kbd. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config ATARI_KBD_CORE + bool + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + config KEYBOARD_ATKBD tristate "AT keyboard" if EMBEDDED || !X86 default y @@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES right-hand column will be interpreted as the key shown in the left-hand column. -config KEYBOARD_SUNKBD - tristate "Sun Type 4 and Type 5 keyboard" - select SERIO - help - Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, - connected either to the Sun keyboard connector or to an serial - (RS-232) port via a simple adapter. - - To compile this driver as a module, choose M here: the - module will be called sunkbd. - -config KEYBOARD_LKKBD - tristate "DECstation/VAXstation LK201/LK401 keyboard" - select SERIO - help - Say Y here if you want to use a LK201 or LK401 style serial - keyboard. This keyboard is also useable on PCs if you attach - it with the inputattach program. The connector pinout is - described within lkkbd.c. - - To compile this driver as a module, choose M here: the - module will be called lkkbd. - -config KEYBOARD_LOCOMO - tristate "LoCoMo Keyboard Support" - depends on SHARP_LOCOMO && INPUT_KEYBOARD - help - Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA - - To compile this driver as a module, choose M here: the - module will be called locomokbd. - -config KEYBOARD_XTKBD - tristate "XT keyboard" - select SERIO - help - Say Y here if you want to use the old IBM PC/XT keyboard (or - compatible) on your system. This is only possible with a - parallel port keyboard adapter, you cannot connect it to the - keyboard port on a PC that runs Linux. - - To compile this driver as a module, choose M here: the - module will be called xtkbd. - -config KEYBOARD_NEWTON - tristate "Newton keyboard" - select SERIO - help - Say Y here if you have a Newton keyboard on a serial port. - - To compile this driver as a module, choose M here: the - module will be called newtonkbd. - -config KEYBOARD_STOWAWAY - tristate "Stowaway keyboard" - select SERIO +config KEYBOARD_BFIN + tristate "Blackfin BF54x keypad support" + depends on (BF54x && !BF544) help - Say Y here if you have a Stowaway keyboard on a serial port. - Stowaway compatible keyboards like Dicota Input-PDA keyboard - are also supported by this driver. + Say Y here if you want to use the BF54x keypad. To compile this driver as a module, choose M here: the - module will be called stowaway. + module will be called bf54x-keys. config KEYBOARD_CORGI tristate "Corgi keyboard" @@ -143,61 +124,50 @@ config KEYBOARD_CORGI To compile this driver as a module, choose M here: the module will be called corgikbd. -config KEYBOARD_SPITZ - tristate "Spitz keyboard" - depends on PXA_SHARPSL - default y +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also useable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. To compile this driver as a module, choose M here: the - module will be called spitzkbd. + module will be called lkkbd. -config KEYBOARD_TOSA - tristate "Tosa keyboard" - depends on MACH_TOSA - default y +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + Say Y here to enable the matrix keypad on the Cirrus EP93XX. To compile this driver as a module, choose M here: the - module will be called tosakbd. + module will be called ep93xx_keypad. -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - default n +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GENERIC_GPIO help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). -config KEYBOARD_AMIGA - tristate "Amiga keyboard" - depends on AMIGA - help - Say Y here if you are running Linux on any AMIGA and have a keyboard - attached. + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. To compile this driver as a module, choose M here: the - module will be called amikbd. + module will be called gpio_keys. -config ATARI_KBD_CORE - bool - -config KEYBOARD_ATARI - tristate "Atari keyboard" - depends on ATARI - select ATARI_KBD_CORE +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GENERIC_GPIO help - Say Y here if you are running Linux on any Atari and have a keyboard - attached. + Enable support for GPIO driven matrix keypad. To compile this driver as a module, choose M here: the - module will be called atakbd. + module will be called matrix_keypad. config KEYBOARD_HIL_OLD tristate "HP HIL keyboard support (simple driver)" @@ -261,20 +231,39 @@ config KEYBOARD_LM8323 To compile this driver as a module, choose M here: the module will be called lm8323. -config KEYBOARD_OMAP - tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO help - Say Y here if you want to use the OMAP keypad. + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA To compile this driver as a module, choose M here: the - module will be called omap-keypad. + module will be called locomokbd. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" depends on PXA27x || PXA3xx help - Enable support for PXA27x/PXA3xx keypad controller + Enable support for PXA27x/PXA3xx keypad controller. To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. @@ -288,51 +277,38 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_AAED2000 - tristate "AAED-2000 keyboard" - depends on MACH_AAED2000 - select INPUT_POLLDEV +config KEYBOARD_SPITZ + tristate "Spitz keyboard" + depends on PXA_SHARPSL default y help - Say Y here to enable the keyboard on the Agilent AAED-2000 - development board. - - To compile this driver as a module, choose M here: the - module will be called aaed2000_kbd. - -config KEYBOARD_GPIO - tristate "GPIO Buttons" - depends on GENERIC_GPIO - help - This driver implements support for buttons connected - to GPIO pins of various CPUs (and some other chips). - - Say Y here if your device has buttons connected - directly to such GPIO pins. Your board-specific - setup logic must also provide a platform device, - with configuration data saying which GPIOs are used. + Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, + SL-C3000 and Sl-C3100 series of PDAs. To compile this driver as a module, choose M here: the - module will be called gpio-keys. + module will be called spitzkbd. -config KEYBOARD_MAPLE - tristate "Maple bus keyboard" - depends on SH_DREAMCAST && MAPLE +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO help - Say Y here if you have a Dreamcast console running Linux and have - a keyboard attached to its Maple bus. + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. To compile this driver as a module, choose M here: the - module will be called maple_keyb. + module will be called stowaway. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO help - Say Y here if you want to use the BF54x keypad. + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. To compile this driver as a module, choose M here: the - module will be called bf54x-keys. + module will be called sunkbd. config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" @@ -344,13 +320,45 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. -config KEYBOARD_EP93XX - tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on (ARCH_OMAP1 || ARCH_OMAP2) help - Say Y here to enable the matrix keypad on the Cirrus EP93XX. + Say Y here if you want to use the OMAP keypad. To compile this driver as a module, choose M here: the - module will be called ep93xx_keypad. + module will be called omap-keypad. + +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 156b647a259b..b5b5eae9724f 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -4,29 +4,30 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o -obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o -obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o +obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o -obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o -obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o +obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o +obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o +obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o +obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o +obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o +obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o -obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o -obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o -obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o -obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o +obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o +obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o +obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 2157cd7de00c..efed0c9e242e 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -29,7 +29,8 @@ struct gpio_button_data { struct gpio_keys_button *button; struct input_dev *input; - struct delayed_work work; + struct timer_list timer; + struct work_struct work; }; struct gpio_keys_drvdata { @@ -40,7 +41,7 @@ struct gpio_keys_drvdata { static void gpio_keys_report_event(struct work_struct *work) { struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work.work); + container_of(work, struct gpio_button_data, work); struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; @@ -50,17 +51,25 @@ static void gpio_keys_report_event(struct work_struct *work) input_sync(input); } +static void gpio_keys_timer(unsigned long _data) +{ + struct gpio_button_data *data = (struct gpio_button_data *)_data; + + schedule_work(&data->work); +} + static irqreturn_t gpio_keys_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct gpio_keys_button *button = bdata->button; - unsigned long delay; BUG_ON(irq != gpio_to_irq(button->gpio)); - delay = button->debounce_interval ? - msecs_to_jiffies(button->debounce_interval) : 0; - schedule_delayed_work(&bdata->work, delay); + if (button->debounce_interval) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(button->debounce_interval)); + else + schedule_work(&bdata->work); return IRQ_HANDLED; } @@ -107,7 +116,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) bdata->input = input; bdata->button = button; - INIT_DELAYED_WORK(&bdata->work, gpio_keys_report_event); + setup_timer(&bdata->timer, + gpio_keys_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, gpio_keys_report_event); error = gpio_request(button->gpio, button->desc ?: "gpio_keys"); if (error < 0) { @@ -166,7 +177,9 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } @@ -190,7 +203,9 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - cancel_delayed_work_sync(&ddata->data[i].work); + if (pdata->buttons[i].debounce_interval) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); } diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c new file mode 100644 index 000000000000..e9b2e7cb05be --- /dev/null +++ b/drivers/input/keyboard/matrix_keypad.c @@ -0,0 +1,453 @@ +/* + * GPIO driven matrix keyboard driver + * + * Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> + * + * Based on corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/input/matrix_keypad.h> + +struct matrix_keypad { + const struct matrix_keypad_platform_data *pdata; + struct input_dev *input_dev; + unsigned short *keycodes; + + uint32_t last_key_state[MATRIX_MAX_COLS]; + struct delayed_work work; + bool scan_pending; + bool stopped; + spinlock_t lock; +}; + +/* + * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause + * minmal side effect when scanning other columns, here it is configured to + * be input, and it should work on most platforms. + */ +static void __activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + bool level_on = !pdata->active_low; + + if (on) { + gpio_direction_output(pdata->col_gpios[col], level_on); + } else { + gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); + gpio_direction_input(pdata->col_gpios[col]); + } +} + +static void activate_col(const struct matrix_keypad_platform_data *pdata, + int col, bool on) +{ + __activate_col(pdata, col, on); + + if (on && pdata->col_scan_delay_us) + udelay(pdata->col_scan_delay_us); +} + +static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, + bool on) +{ + int col; + + for (col = 0; col < pdata->num_col_gpios; col++) + __activate_col(pdata, col, on); +} + +static bool row_asserted(const struct matrix_keypad_platform_data *pdata, + int row) +{ + return gpio_get_value_cansleep(pdata->row_gpios[row]) ? + !pdata->active_low : pdata->active_low; +} + +static void enable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); +} + +static void disable_row_irqs(struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); +} + +/* + * This gets the keys from keyboard and reports it to input subsystem + */ +static void matrix_keypad_scan(struct work_struct *work) +{ + struct matrix_keypad *keypad = + container_of(work, struct matrix_keypad, work.work); + struct input_dev *input_dev = keypad->input_dev; + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + uint32_t new_state[MATRIX_MAX_COLS]; + int row, col, code; + + /* de-activate all columns for scanning */ + activate_all_cols(pdata, false); + + memset(new_state, 0, sizeof(new_state)); + + /* assert each column and read the row status out */ + for (col = 0; col < pdata->num_col_gpios; col++) { + + activate_col(pdata, col, true); + + for (row = 0; row < pdata->num_row_gpios; row++) + new_state[col] |= + row_asserted(pdata, row) ? (1 << row) : 0; + + activate_col(pdata, col, false); + } + + for (col = 0; col < pdata->num_col_gpios; col++) { + uint32_t bits_changed; + + bits_changed = keypad->last_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->num_row_gpios; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + code = (row << 4) + col; + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad->keycodes[code], + new_state[col] & (1 << row)); + } + } + input_sync(input_dev); + + memcpy(keypad->last_key_state, new_state, sizeof(new_state)); + + activate_all_cols(pdata, true); + + /* Enable IRQs again */ + spin_lock_irq(&keypad->lock); + keypad->scan_pending = false; + enable_row_irqs(keypad); + spin_unlock_irq(&keypad->lock); +} + +static irqreturn_t matrix_keypad_interrupt(int irq, void *id) +{ + struct matrix_keypad *keypad = id; + unsigned long flags; + + spin_lock_irqsave(&keypad->lock, flags); + + /* + * See if another IRQ beaten us to it and scheduled the + * scan already. In that case we should not try to + * disable IRQs again. + */ + if (unlikely(keypad->scan_pending || keypad->stopped)) + goto out; + + disable_row_irqs(keypad); + keypad->scan_pending = true; + schedule_delayed_work(&keypad->work, + msecs_to_jiffies(keypad->pdata->debounce_ms)); + +out: + spin_unlock_irqrestore(&keypad->lock, flags); + return IRQ_HANDLED; +} + +static int matrix_keypad_start(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = false; + mb(); + + /* + * Schedule an immediate key scan to capture current key state; + * columns will be activated and IRQs be enabled after the scan. + */ + schedule_delayed_work(&keypad->work, 0); + + return 0; +} + +static void matrix_keypad_stop(struct input_dev *dev) +{ + struct matrix_keypad *keypad = input_get_drvdata(dev); + + keypad->stopped = true; + mb(); + flush_work(&keypad->work.work); + /* + * matrix_keypad_scan() will leave IRQs enabled; + * we should disable them now. + */ + disable_row_irqs(keypad); +} + +#ifdef CONFIG_PM +static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + return 0; +} + +static int matrix_keypad_resume(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + if (device_may_wakeup(&pdev->dev)) + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_wake(gpio_to_irq(pdata->row_gpios[i])); + + matrix_keypad_start(keypad->input_dev); + + return 0; +} +#else +#define matrix_keypad_suspend NULL +#define matrix_keypad_resume NULL +#endif + +static int __devinit init_matrix_gpio(struct platform_device *pdev, + struct matrix_keypad *keypad) +{ + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i, err = -EINVAL; + + /* initialized strobe lines as outputs, activated */ + for (i = 0; i < pdata->num_col_gpios; i++) { + err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for COL%d\n", + pdata->col_gpios[i], i); + goto err_free_cols; + } + + gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); + if (err) { + dev_err(&pdev->dev, + "failed to request GPIO%d for ROW%d\n", + pdata->row_gpios[i], i); + goto err_free_rows; + } + + gpio_direction_input(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } + } + + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); + return 0; + +err_free_irqs: + while (--i >= 0) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + i = pdata->num_row_gpios; +err_free_rows: + while (--i >= 0) + gpio_free(pdata->row_gpios[i]); + i = pdata->num_col_gpios; +err_free_cols: + while (--i >= 0) + gpio_free(pdata->col_gpios[i]); + + return err; +} + +static int __devinit matrix_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keypad_platform_data *pdata; + const struct matrix_keymap_data *keymap_data; + struct matrix_keypad *keypad; + struct input_dev *input_dev; + unsigned short *keycodes; + int i; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!keymap_data->max_keymap_size) { + dev_err(&pdev->dev, "invalid keymap data supplied\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); + keycodes = kzalloc(keymap_data->max_keymap_size * + sizeof(keypad->keycodes), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !keycodes || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + keypad->input_dev = input_dev; + keypad->pdata = pdata; + keypad->keycodes = keycodes; + keypad->stopped = true; + INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); + spin_lock_init(&keypad->lock); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->open = matrix_keypad_start; + input_dev->close = matrix_keypad_stop; + + input_dev->keycode = keycodes; + input_dev->keycodesize = sizeof(*keycodes); + input_dev->keycodemax = keymap_data->max_keymap_size; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keycodes[(row << 4) + col] = code; + __set_bit(code, input_dev->keybit); + } + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + err = init_matrix_gpio(pdev, keypad); + if (err) + goto err_free_mem; + + err = input_register_device(keypad->input_dev); + if (err) + goto err_free_mem; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_mem: + input_free_device(input_dev); + kfree(keycodes); + kfree(keypad); + return err; +} + +static int __devexit matrix_keypad_remove(struct platform_device *pdev) +{ + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + const struct matrix_keypad_platform_data *pdata = keypad->pdata; + int i; + + device_init_wakeup(&pdev->dev, 0); + + for (i = 0; i < pdata->num_row_gpios; i++) { + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); + gpio_free(pdata->row_gpios[i]); + } + + for (i = 0; i < pdata->num_col_gpios; i++) + gpio_free(pdata->col_gpios[i]); + + input_unregister_device(keypad->input_dev); + platform_set_drvdata(pdev, NULL); + kfree(keypad->keycodes); + kfree(keypad); + + return 0; +} + +static struct platform_driver matrix_keypad_driver = { + .probe = matrix_keypad_probe, + .remove = __devexit_p(matrix_keypad_remove), + .suspend = matrix_keypad_suspend, + .resume = matrix_keypad_resume, + .driver = { + .name = "matrix-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init matrix_keypad_init(void) +{ + return platform_driver_register(&matrix_keypad_driver); +} + +static void __exit matrix_keypad_exit(void) +{ + platform_driver_unregister(&matrix_keypad_driver); +} + +module_init(matrix_keypad_init); +module_exit(matrix_keypad_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:matrix-keypad"); diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 5e5eb88d8d1e..7b6ce178f1b6 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -46,7 +46,7 @@ static void gpio_mouse_scan(struct input_polled_dev *dev) input_sync(input); } -static int __init gpio_mouse_probe(struct platform_device *pdev) +static int __devinit gpio_mouse_probe(struct platform_device *pdev) { struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; struct input_polled_dev *input_poll; @@ -170,10 +170,8 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev) return 0; } -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:gpio_mouse"); - static struct platform_driver gpio_mouse_device_driver = { + .probe = gpio_mouse_probe, .remove = __devexit_p(gpio_mouse_remove), .driver = { .name = "gpio_mouse", @@ -183,8 +181,7 @@ static struct platform_driver gpio_mouse_device_driver = { static int __init gpio_mouse_init(void) { - return platform_driver_probe(&gpio_mouse_device_driver, - gpio_mouse_probe); + return platform_driver_register(&gpio_mouse_device_driver); } module_init(gpio_mouse_init); @@ -197,3 +194,5 @@ module_exit(gpio_mouse_exit); MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); MODULE_DESCRIPTION("GPIO mouse driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */ + diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fb8a3cd3ffd0..924e8ed7f2cf 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -392,6 +392,34 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), }, }, + { + .ident = "Acer Aspire One 150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + }, + { + .ident = "Advent 4211", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + }, + { + .ident = "Medion Akoya Mini E1210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + }, + { + .ident = "Mivvy M310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + }, { } }; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index f919bf57293c..582245c497eb 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -934,10 +934,11 @@ static bool i8042_suspended; static int i8042_suspend(struct platform_device *dev, pm_message_t state) { - if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) { + if (!i8042_suspended && state.event == PM_EVENT_SUSPEND) i8042_controller_reset(); - i8042_suspended = true; - } + + i8042_suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index fb17573f8f2d..d66f4944f2a0 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -935,10 +935,11 @@ static int serio_suspend(struct device *dev, pm_message_t state) { struct serio *serio = to_serio_port(dev); - if (!serio->suspended && state.event == PM_EVENT_SUSPEND) { + if (!serio->suspended && state.event == PM_EVENT_SUSPEND) serio_cleanup(serio); - serio->suspended = true; - } + + serio->suspended = state.event == PM_EVENT_SUSPEND || + state.event == PM_EVENT_FREEZE; return 0; } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 38bf86384aeb..c896d6a21b7e 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -384,6 +384,8 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS2, 0); wacom_report_key(wcombo, BTN_TOUCH, 0); wacom_report_abs(wcombo, ABS_WHEEL, 0); + if (wacom->features->type >= INTUOS3S) + wacom_report_abs(wcombo, ABS_Z, 0); } wacom_report_key(wcombo, wacom->tool[idx], 0); wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ @@ -836,6 +838,7 @@ static struct wacom_features wacom_features[] = { { "Wacom DTU710", 8, 34080, 27660, 511, 0, PL }, { "Wacom DTF521", 8, 6282, 4762, 511, 0, PL }, { "Wacom DTF720", 8, 6858, 5506, 511, 0, PL }, + { "Wacom DTF720a", 8, 6858, 5506, 511, 0, PL }, { "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, @@ -897,8 +900,9 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC2) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 9933eb861c71..529e2ba505c3 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -776,7 +776,7 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) * But don't wait if split was due to the io size restriction */ if (unlikely(out_of_pages)) - congestion_wait(WRITE, HZ/100); + congestion_wait(BLK_RW_ASYNC, HZ/100); /* * With async crypto it is unsafe to share the crypto context diff --git a/drivers/md/md.c b/drivers/md/md.c index 0f4a70c43ffc..d4351ff0849f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1756,9 +1756,10 @@ static void print_sb_1(struct mdp_superblock_1 *sb) __u8 *uuid; uuid = sb->set_uuid; - printk(KERN_INFO "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" - ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" - KERN_INFO "md: Name: \"%s\" CT:%llu\n", + printk(KERN_INFO + "md: SB: (V:%u) (F:0x%08x) Array-ID:<%02x%02x%02x%02x" + ":%02x%02x:%02x%02x:%02x%02x:%02x%02x%02x%02x%02x%02x>\n" + "md: Name: \"%s\" CT:%llu\n", le32_to_cpu(sb->major_version), le32_to_cpu(sb->feature_map), uuid[0], uuid[1], uuid[2], uuid[3], @@ -1770,12 +1771,13 @@ static void print_sb_1(struct mdp_superblock_1 *sb) & MD_SUPERBLOCK_1_TIME_SEC_MASK); uuid = sb->device_uuid; - printk(KERN_INFO "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" + printk(KERN_INFO + "md: L%u SZ%llu RD:%u LO:%u CS:%u DO:%llu DS:%llu SO:%llu" " RO:%llu\n" - KERN_INFO "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" - ":%02x%02x%02x%02x%02x%02x\n" - KERN_INFO "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" - KERN_INFO "md: (MaxDev:%u) \n", + "md: Dev:%08x UUID: %02x%02x%02x%02x:%02x%02x:%02x%02x:%02x%02x" + ":%02x%02x%02x%02x%02x%02x\n" + "md: (F:0x%08x) UT:%llu Events:%llu ResyncOffset:%llu CSUM:0x%08x\n" + "md: (MaxDev:%u) \n", le32_to_cpu(sb->level), (unsigned long long)le64_to_cpu(sb->size), le32_to_cpu(sb->raid_disks), diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 7ac12cb0be4a..5b6e58a3ba46 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -32,8 +32,7 @@ * This driver was tested with firmware revision A4. */ -#if defined(CONFIG_KEYBOARD_DM355EVM) \ - || defined(CONFIG_KEYBOARD_DM355EVM_MODULE) +#if defined(CONFIG_INPUT_DM355EVM) || defined(CONFIG_INPUT_DM355EVM_MODULE) #define msp_has_keyboard() true #else #define msp_has_keyboard() false diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 8d1c60a3f0df..5d778ec8cdb2 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -235,7 +235,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) skb->ip_summed = CHECKSUM_UNNECESSARY; dev_dbg(xpnet, "passing skb to network layer\n" - KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); @@ -399,7 +399,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, msg->buf_pa = xp_pa((void *)start_addr); dev_dbg(xpnet, "sending XPC message to %d:%d\n" - KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, msg->leadin_ignore, msg->tailout_ignore); diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c index 85a18175730b..08787f5a22a3 100644 --- a/drivers/net/a2065.c +++ b/drivers/net/a2065.c @@ -569,16 +569,8 @@ static int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) #ifdef DEBUG_DRIVER /* dump the packet */ - { - int i; - - for (i = 0; i < 64; i++) { - if ((i % 16) == 0) - printk("\n" KERN_DEBUG); - printk ("%2.2x ", skb->data [i]); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "skb->data: ", DUMP_PREFIX_NONE, + 16, 1, skb->data, 64, true); #endif entry = lp->tx_new & lp->tx_ring_mod_mask; ib->btx_ring [entry].length = (-skblen) | 0xf000; diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index d6d4ab3b430c..7d227cdab9f8 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -158,15 +158,12 @@ module_exit(arcnet_exit); void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc) { - int i; + char hdr[32]; - printk(KERN_DEBUG "%6s: skb dump (%s) follows:", dev->name, desc); - for (i = 0; i < skb->len; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", ((u_char *) skb->data)[i]); - } - printk("\n"); + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s skb->data:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, skb->data, skb->len, true); } EXPORT_SYMBOL(arcnet_dump_skb); @@ -184,6 +181,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, int i, length; unsigned long flags = 0; static uint8_t buf[512]; + char hdr[32]; /* hw.copy_from_card expects IRQ context so take the IRQ lock to keep it single threaded */ @@ -197,14 +195,10 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum, /* if the offset[0] byte is nonzero, this is a 256-byte packet */ length = (buf[2] ? 256 : 512); - printk(KERN_DEBUG "%6s: packet dump (%s) follows:", dev->name, desc); - for (i = 0; i < length; i++) { - if (i % 16 == 0) - printk("\n" KERN_DEBUG "[%04X] ", i); - printk("%02X ", buf[i]); - } - printk("\n"); - + /* dump the packet */ + snprintf(hdr, sizeof(hdr), "%6s:%s packet dump:", dev->name, desc); + print_hex_dump(KERN_DEBUG, hdr, DUMP_PREFIX_OFFSET, + 16, 1, buf, length, true); } #else diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 9578a3dfac01..206144f2470f 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -428,10 +428,11 @@ bmac_init_phy(struct net_device *dev) printk(KERN_DEBUG "phy registers:"); for (addr = 0; addr < 32; ++addr) { if ((addr & 7) == 0) - printk("\n" KERN_DEBUG); - printk(" %.4x", bmac_mif_read(dev, addr)); + printk(KERN_DEBUG); + printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr)); } - printk("\n"); + printk(KERN_CONT "\n"); + if (bp->is_bmac_plus) { unsigned int capable, ctrl; diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 6c67be679764..c36a5f33739f 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -484,8 +484,9 @@ static void bnx2x_fw_dump(struct bnx2x *bp) mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); mark = ((mark + 0x3) & ~0x3); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + printk(KERN_ERR PFX); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + @@ -500,7 +501,7 @@ static void bnx2x_fw_dump(struct bnx2x *bp) data[8] = 0x0; printk(KERN_CONT "%s", (char *)data); } - printk("\n" KERN_ERR PFX "end of fw dump\n"); + printk(KERN_ERR PFX "end of fw dump\n"); } static void bnx2x_panic_dump(struct bnx2x *bp) @@ -7354,7 +7355,7 @@ static void bnx2x_reset_task(struct work_struct *work) #ifdef BNX2X_STOP_ON_ERROR BNX2X_ERR("reset task called but STOP_ON_ERROR defined" " so reset not done to allow debug dump,\n" - KERN_ERR " you will need to reboot when done\n"); + " you will need to reboot when done\n"); return; #endif diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 538dda4422dc..fb5df5c6203e 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -642,8 +642,7 @@ static int setup_sge_qsets(struct adapter *adap) struct port_info *pi = netdev_priv(dev); pi->qs = &adap->sge.qs[pi->first_qset]; - for (j = pi->first_qset; j < pi->first_qset + pi->nqsets; - ++j, ++qset_idx) { + for (j = 0; j < pi->nqsets; ++j, ++qset_idx) { set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO); err = t3_sge_alloc_qset(adap, qset_idx, 1, (adap->flags & USING_MSIX) ? qset_idx + 1 : diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 2df8fb0af701..12fd446f9895 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -1820,11 +1820,19 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) struct device *emac_dev = &priv->ndev->dev; struct sockaddr *sa = addr; + if (!is_valid_ether_addr(sa->sa_data)) + return -EINVAL; + /* Store mac addr in priv and rx channel and set it in EMAC hw */ memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); - memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); - emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + + /* If the interface is down - rxch is NULL. */ + /* MAC address is configured only after the interface is enabled. */ + if (netif_running(ndev)) { + memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); + emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + } if (netif_msg_drv(priv)) dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 895d72143ee0..4b6a219fecea 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -268,8 +268,9 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO "tx_coalesce:\t%d packets\n", tx_coalesce); if (np->coalesce) - printk(KERN_INFO "rx_coalesce:\t%d packets\n" - KERN_INFO "rx_timeout: \t%d ns\n", + printk(KERN_INFO + "rx_coalesce:\t%d packets\n" + "rx_timeout: \t%d ns\n", np->rx_coalesce, np->rx_timeout*640); if (np->vlan) printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); @@ -1522,9 +1523,9 @@ mii_get_media (struct net_device *dev) printk (KERN_INFO "Operating at 10 Mbps, "); } if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) @@ -1614,9 +1615,9 @@ mii_set_media (struct net_device *dev) } if (np->full_duplex) { bmcr |= MII_BMCR_DUPLEX_MODE; - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } #if 0 /* Set 1000BaseT Master/Slave setting */ @@ -1669,9 +1670,9 @@ mii_get_media_pcs (struct net_device *dev) __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); printk (KERN_INFO "Operating at 1000 Mbps, "); if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk ("Full duplex\n"); + printk (KERN_CONT "Full duplex\n"); } else { - printk ("Half duplex\n"); + printk (KERN_CONT "Half duplex\n"); } } if (np->tx_flow) diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index b60e27dfcfa7..88d7ebf31220 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -338,8 +338,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, #ifndef MODULE static int printed_version; if (!printed_version++) - printk (KERN_INFO "%s" KERN_INFO "%s", - version, version2); + printk(KERN_INFO "%s%s", version, version2); #endif card_idx++; @@ -1600,7 +1599,7 @@ static int __init epic_init (void) { /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE - printk (KERN_INFO "%s" KERN_INFO "%s", + printk (KERN_INFO "%s%s", version, version2); #endif diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index 891be28a7d4f..48385c42ab57 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -1209,17 +1209,20 @@ static void fealnx_tx_timeout(struct net_device *dev) unsigned long flags; int i; - printk(KERN_WARNING "%s: Transmit timed out, status %8.8x," - " resetting...\n", dev->name, ioread32(ioaddr + ISR)); + printk(KERN_WARNING + "%s: Transmit timed out, status %8.8x, resetting...\n", + dev->name, ioread32(ioaddr + ISR)); { printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int) np->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %p: ", np->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int) np->rx_ring[i].status); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", np->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %4.4x", np->tx_ring[i].status); + printk(KERN_CONT "\n"); } spin_lock_irqsave(&np->lock, flags); diff --git a/drivers/net/fec.h b/drivers/net/fec.h index 30b7dd671336..cc47f3f057c7 100644 --- a/drivers/net/fec.h +++ b/drivers/net/fec.h @@ -46,12 +46,12 @@ #else -#define FEC_ECNTRL; 0x000 /* Ethernet control reg */ -#define FEC_IEVENT; 0x004 /* Interrupt even reg */ -#define FEC_IMASK; 0x008 /* Interrupt mask reg */ -#define FEC_IVEC; 0x00c /* Interrupt vec status reg */ -#define FEC_R_DES_ACTIVE; 0x010 /* Receive descriptor reg */ -#define FEC_X_DES_ACTIVE; 0x01c /* Transmit descriptor reg */ +#define FEC_ECNTRL 0x000 /* Ethernet control reg */ +#define FEC_IEVENT 0x004 /* Interrupt even reg */ +#define FEC_IMASK 0x008 /* Interrupt mask reg */ +#define FEC_IVEC 0x00c /* Interrupt vec status reg */ +#define FEC_R_DES_ACTIVE 0x010 /* Receive descriptor reg */ +#define FEC_X_DES_ACTIVE 0x014 /* Transmit descriptor reg */ #define FEC_MII_DATA 0x040 /* MII manage frame reg */ #define FEC_MII_SPEED 0x044 /* MII speed control reg */ #define FEC_R_BOUND 0x08c /* FIFO receive bound reg */ diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 9d5b62cb30f7..d62378cbc149 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -173,8 +173,8 @@ static int tx_params[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n" -KERN_INFO " Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" -KERN_INFO " Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; +" Some modifications by Eric kasten <kasten@nscl.msu.edu>\n" +" Further modifications by Keith Underwood <keithu@parl.clemson.edu>\n"; /* IP_MF appears to be only defined in <netinet/ip.h>, however, @@ -1080,11 +1080,14 @@ static void hamachi_tx_timeout(struct net_device *dev) { printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length)); - printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); + printk(KERN_CONT " %8.8x", + le32_to_cpu(hmp->rx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length)); - printk("\n"); + printk(KERN_CONT " %4.4x", + le32_to_cpu(hmp->tx_ring[i].status_n_length)); + printk(KERN_CONT "\n"); } /* Reinit the hardware and make sure the Rx and Tx processes @@ -1753,13 +1756,13 @@ static int hamachi_close(struct net_device *dev) #ifdef __i386__ if (hamachi_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)hmp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %c #%d desc. %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x.\n", readl(ioaddr + TxCurPtr) == (long)&hmp->tx_ring[i] ? '>' : ' ', i, hmp->tx_ring[i].status_n_length, hmp->tx_ring[i].addr); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)hmp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %4.4x %8.8x\n", @@ -1770,7 +1773,7 @@ static int hamachi_close(struct net_device *dev) u16 *addr = (u16 *) hmp->rx_skbuff[i]->data; int j; - + printk(KERN_DEBUG "Addr: "); for (j = 0; j < 0x50; j++) printk(" %4.4x", addr[j]); printk("\n"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 5e4b7afd0683..352703255bba 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -68,7 +68,7 @@ static const char paranoia_str[] = KERN_ERR static const char bc_drvname[] = "baycom_epp"; static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 2e6fc4dc74b1..5f5af9a606f8 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -102,7 +102,7 @@ static const char bc_drvname[] = "baycom_par"; static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index b6a816e60c0f..aa4488e871b2 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -91,7 +91,7 @@ static const char bc_drvname[] = "baycom_ser_fdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_fdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 3bcc57acbe6d..88c593596020 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -79,7 +79,7 @@ static const char bc_drvname[] = "baycom_ser_hdx"; static const char bc_drvinfo[] = KERN_INFO "baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n" -KERN_INFO "baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; +"baycom_ser_hdx: version 0.10 compiled " __TIME__ " " __DATE__ "\n"; /* --------------------------------------------------------------------- */ diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index efd9be214885..ac28dd5a4fd1 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -190,6 +190,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) phy->ops.write_reg = igb_write_phy_reg_igp; } + /* set lan id */ + hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >> + E1000_STATUS_FUNC_SHIFT; + /* Set phy->phy_addr and phy->id. */ ret_val = igb_get_phy_id_82575(hw); if (ret_val) diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c index d56890f5c9d5..7c5978ad929a 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c @@ -138,6 +138,10 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->hw.fc.requested_mode = ixgbe_fc_none; } adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + } adapter->flags |= IXGBE_FLAG_DCB_ENABLED; ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) @@ -154,6 +158,8 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) adapter->dcb_cfg.pfc_mode_enable = false; adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; adapter->flags |= IXGBE_FLAG_RSS_ENABLED; + if (adapter->hw.mac.type == ixgbe_mac_82599EB) + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; ixgbe_init_interrupt_scheme(adapter); if (netif_running(netdev)) netdev->netdev_ops->ndo_open(netdev); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a3061aacffd8..e3442f47f932 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3130,7 +3130,11 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) #endif if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { DPRINTK(PROBE, INFO, "FCOE enabled with RSS \n"); - ixgbe_set_rss_queues(adapter); + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) || + (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + ixgbe_set_fdir_queues(adapter); + else + ixgbe_set_rss_queues(adapter); } /* adding FCoE rx rings to the end */ f->mask = adapter->num_rx_queues; @@ -3388,7 +3392,12 @@ static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter) } #endif /* CONFIG_IXGBE_DCB */ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { - ixgbe_cache_ring_rss(adapter); + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) || + (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + ixgbe_cache_ring_fdir(adapter); + else + ixgbe_cache_ring_rss(adapter); + fcoe_i = f->mask; } for (i = 0; i < f->indices; i++, fcoe_i++) @@ -5578,12 +5587,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_FCOE_CRC; netdev->features |= NETIF_F_FSO; netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; - DPRINTK(DRV, INFO, "FCoE enabled, " - "disabling Flow Director\n"); - adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; - adapter->flags &= - ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; - adapter->atr_sample_rate = 0; } else { adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; } diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index c9bfe4eea189..78c088331f57 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -130,8 +130,8 @@ static int full_duplex[MAX_UNITS]; static const char version[] __devinitconst = KERN_INFO DRV_NAME " dp8381x driver, version " DRV_VERSION ", " DRV_RELDATE "\n" - KERN_INFO " originally by Donald Becker <becker@scyld.com>\n" - KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; + " originally by Donald Becker <becker@scyld.com>\n" + " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver"); diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 5c3e242428f1..992dbfffdb05 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -321,7 +321,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); + printk(KERN_INFO "%s%s", version1, version2); printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 8c1f6988f398..89f7b2ad5231 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -105,7 +105,7 @@ IVc. Errata static char version[] __devinitdata = KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n" -KERN_INFO " Support available from http://foo.com/bar/baz.html\n"; +" Support available from http://foo.com/bar/baz.html\n"; /* define to 1 to enable PIO instead of MMIO */ #undef USE_IO_OPS diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index f51944b28cfa..06618af1a468 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -298,14 +298,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) strcpy(info->node.dev_name, dev->name); - printk(KERN_INFO "%s: port %#3lx, irq %d,", - dev->name, dev->base_addr, dev->irq); - printk (" mmio %#5lx,", (u_long)ti->mmio); - printk (" sram %#5lx,", (u_long)ti->sram_base << 12); - printk ("\n" KERN_INFO " hwaddr="); - for (i = 0; i < TR_ALEN; i++) - printk("%02X", dev->dev_addr[i]); - printk("\n"); + printk(KERN_INFO + "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", + dev->name, dev->base_addr, dev->irq, + (u_long)ti->mmio, (u_long)(ti->sram_base << 12), + dev->dev_addr); return 0; cs_failed: diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 02ef63ed1f99..36de91baf238 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1425,15 +1425,12 @@ static void BuildLAF(int *ladrf, int *adr) ladrf[byte] |= (1 << (hashcode & 7)); #ifdef PCMCIA_DEBUG - if (pc_debug > 2) { - printk(KERN_DEBUG " adr ="); - for (i = 0; i < 6; i++) - printk(" %02X", adr[i]); - printk("\n" KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63]" - " =", hashcode); - for (i = 0; i < 8; i++) - printk(" %02X", ladrf[i]); - printk("\n"); + if (pc_debug > 2) + printk(KERN_DEBUG " adr =%pM\n", adr); + printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); + for (i = 0; i < 8; i++) + printk(KERN_CONT " %02X", ladrf[i]); + printk(KERN_CONT "\n"); } #endif } /* BuildLAF */ diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 1c35e1d637a0..28368157dac4 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -485,7 +485,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -496,7 +496,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_tx_ring; } @@ -505,7 +505,7 @@ static void pcnet32_realloc_tx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -563,7 +563,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, &new_ring_dma_addr); if (new_rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Consistent memory allocation failed.\n", dev->name); return; @@ -574,7 +574,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_dma_addr_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_rx_ring; } @@ -583,7 +583,7 @@ static void pcnet32_realloc_rx_ring(struct net_device *dev, GFP_ATOMIC); if (!new_skb_list) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR + printk(KERN_ERR "%s: Memory allocation failed.\n", dev->name); goto free_new_lists; } @@ -1766,38 +1766,38 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* Version 0x2623 and 0x2624 */ if (((chip_version + 1) & 0xfffe) == 0x2624) { i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */ - printk("\n" KERN_INFO " tx_start_pt(0x%04x):", i); + printk(KERN_INFO " tx_start_pt(0x%04x):", i); switch (i >> 10) { case 0: - printk(" 20 bytes,"); + printk(KERN_CONT " 20 bytes,"); break; case 1: - printk(" 64 bytes,"); + printk(KERN_CONT " 64 bytes,"); break; case 2: - printk(" 128 bytes,"); + printk(KERN_CONT " 128 bytes,"); break; case 3: - printk("~220 bytes,"); + printk(KERN_CONT "~220 bytes,"); break; } i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */ - printk(" BCR18(%x):", i & 0xffff); + printk(KERN_CONT " BCR18(%x):", i & 0xffff); if (i & (1 << 5)) - printk("BurstWrEn "); + printk(KERN_CONT "BurstWrEn "); if (i & (1 << 6)) - printk("BurstRdEn "); + printk(KERN_CONT "BurstRdEn "); if (i & (1 << 7)) - printk("DWordIO "); + printk(KERN_CONT "DWordIO "); if (i & (1 << 11)) - printk("NoUFlow "); + printk(KERN_CONT "NoUFlow "); i = a->read_bcr(ioaddr, 25); - printk("\n" KERN_INFO " SRAMSIZE=0x%04x,", i << 8); + printk(KERN_INFO " SRAMSIZE=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 26); - printk(" SRAM_BND=0x%04x,", i << 8); + printk(KERN_CONT " SRAM_BND=0x%04x,", i << 8); i = a->read_bcr(ioaddr, 27); if (i & (1 << 14)) - printk("LowLatRx"); + printk(KERN_CONT "LowLatRx"); } } @@ -1996,7 +1996,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->tx_ring_dma_addr); if (lp->tx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2008,7 +2008,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) &lp->rx_ring_dma_addr); if (lp->rx_ring == NULL) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; @@ -2018,7 +2018,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2027,7 +2027,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_dma_addr) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2036,7 +2036,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->tx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } @@ -2045,7 +2045,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, const char *name) GFP_ATOMIC); if (!lp->rx_skbuff) { if (netif_msg_drv(lp)) - printk("\n" KERN_ERR PFX + printk(KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index ed63d23a6452..961b5397a531 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -49,8 +49,8 @@ #include <asm/processor.h> #define DRV_NAME "r6040" -#define DRV_VERSION "0.23" -#define DRV_RELDATE "05May2009" +#define DRV_VERSION "0.24" +#define DRV_RELDATE "08Jul2009" /* PHY CHIP Address */ #define PHY1_ADDR 1 /* For MAC1 */ @@ -704,8 +704,11 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id) /* Read MISR status and clear */ status = ioread16(ioaddr + MISR); - if (status == 0x0000 || status == 0xffff) + if (status == 0x0000 || status == 0xffff) { + /* Restore RDC MAC interrupt */ + iowrite16(misr, ioaddr + MIER); return IRQ_NONE; + } /* RX interrupt request */ if (status & RX_INTS) { diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 838cce8b8fff..669253c7bd41 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -180,7 +180,7 @@ static int full_duplex[MAX_UNITS] = {0, }; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n" -KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; +" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 545f81b34ad7..d1521c3875b2 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -1698,13 +1698,13 @@ static int netdev_close(struct net_device *dev) #ifdef __i386__ if (netif_msg_hw(np)) { - printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n", + printk(KERN_DEBUG " Tx ring at %8.8x:\n", (int)(np->tx_ring_dma)); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d desc. %4.4x %8.8x %8.8x.\n", + printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, np->tx_ring[i].frag[0].length); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)(np->rx_ring_dma)); for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 0f78f99f9b20..7030bd5e9848 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1132,7 +1132,9 @@ static int tsi108_get_mac(struct net_device *dev) } if (!is_valid_ether_addr(dev->dev_addr)) { - printk("KERN_ERR: word1: %08x, word2: %08x\n", word1, word2); + printk(KERN_ERR + "%s: Invalid MAC address. word1: %08x, word2: %08x\n", + dev->name, word1, word2); return -EINVAL; } @@ -1201,8 +1203,8 @@ static void tsi108_set_rx_mode(struct net_device *dev) __set_bit(hash, &data->mc_hash[0]); } else { printk(KERN_ERR - "%s: got multicast address of length %d " - "instead of 6.\n", dev->name, + "%s: got multicast address of length %d instead of 6.\n", + dev->name, mc->dmi_addrlen); } diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 81f054dbb88d..ef49744a5085 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -944,9 +944,10 @@ static void de_set_media (struct de_private *de) macmode &= ~FullDuplex; if (netif_msg_link(de)) { - printk(KERN_INFO "%s: set link %s\n" - KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" - KERN_INFO "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", + printk(KERN_INFO + "%s: set link %s\n" + "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" + "%s: set mode 0x%x, set sia 0x%x,0x%x,0x%x\n", de->dev->name, media_name[media], de->dev->name, dr32(MacMode), dr32(SIAStatus), dr32(CSR13), dr32(CSR14), dr32(CSR15), diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 2abb5d3becc6..99a63649f4fc 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -570,16 +570,18 @@ static void tulip_tx_timeout(struct net_device *dev) (unsigned int)tp->rx_ring[i].buffer2, buf[0], buf[1], buf[2]); for (j = 0; buf[j] != 0xee && j < 1600; j++) - if (j < 100) printk(" %2.2x", buf[j]); - printk(" j=%d.\n", j); + if (j < 100) + printk(KERN_CONT " %2.2x", buf[j]); + printk(KERN_CONT " j=%d.\n", j); } printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->rx_ring[i].status); - printk("\n" KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); + printk(KERN_CONT " %8.8x", + (unsigned int)tp->rx_ring[i].status); + printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)tp->tx_ring[i].status); - printk("\n"); + printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status); + printk(KERN_CONT "\n"); } #endif diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 842b1a2c40d4..0f15773dae52 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -142,7 +142,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; static const char version[] __initconst = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n" - KERN_INFO " http://www.scyld.com/network/drivers.html\n"; + " http://www.scyld.com/network/drivers.html\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); @@ -939,7 +939,7 @@ static void tx_timeout(struct net_device *dev) printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) printk(" %8.8x", (unsigned int)np->rx_ring[i].status); - printk("\n"KERN_DEBUG" Tx ring %p: ", np->tx_ring); + printk(KERN_DEBUG" Tx ring %p: ", np->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) printk(" %8.8x", np->tx_ring[i].status); printk("\n"); @@ -1520,7 +1520,7 @@ static int netdev_close(struct net_device *dev) printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x.\n", i, np->tx_ring[i].length, np->tx_ring[i].status, np->tx_ring[i].buffer1); - printk("\n"KERN_DEBUG " Rx ring %8.8x:\n", + printk(KERN_DEBUG " Rx ring %8.8x:\n", (int)np->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c index 223238de475c..1ea1ef6c3b96 100644 --- a/drivers/net/wan/hd64570.c +++ b/drivers/net/wan/hd64570.c @@ -584,8 +584,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(phy_node(port)), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port_to_card(port)->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inw(get_dmac_tx(port) + CDAL, card), sca_inw(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c index 497b003d7239..f099c34a3ae2 100644 --- a/drivers/net/wan/hd64572.c +++ b/drivers/net/wan/hd64572.c @@ -529,8 +529,9 @@ static void sca_dump_rings(struct net_device *dev) sca_in(DSR_RX(port->chan), card) & DSR_DE ? "" : "in"); for (cnt = 0; cnt < port->card->rx_ring_buffers; cnt++) printk(" %02X", readb(&(desc_address(port, cnt, 0)->stat))); + printk(KERN_CONT "\n"); - printk("\n" KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " + printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u " "last=%u %sactive", sca_inl(get_dmac_tx(port) + CDAL, card), sca_inl(get_dmac_tx(port) + EDAL, card), diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 3fb9dbc88a1a..d14e95a08d66 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -326,11 +326,9 @@ sbni_pci_probe( struct net_device *dev ) } if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs) - printk( KERN_WARNING " WARNING: The PCI BIOS assigned " - "this PCI card to IRQ %d, which is unlikely " - "to work!.\n" - KERN_WARNING " You should use the PCI BIOS " - "setup to assign a valid IRQ line.\n", + printk( KERN_WARNING + " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n" + " You should use the PCI BIOS setup to assign a valid IRQ line.\n", pci_irq_line ); /* avoiding re-enable dual adapters */ diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index d26e7b485315..eb0337c49546 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -1,5 +1,6 @@ config ATH_COMMON tristate "Atheros Wireless Cards" + depends on WLAN_80211 depends on ATH5K || ATH9K || AR9170_USB source "drivers/net/wireless/ath/ath5k/Kconfig" diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index b61a071788a5..4ccf48e396df 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -355,7 +355,14 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } if (bf_next == NULL) { - INIT_LIST_HEAD(&bf_head); + /* + * Make sure the last desc is reclaimed if it + * not a holding desc. + */ + if (!bf_last->bf_stale) + list_move_tail(&bf->list, &bf_head); + else + INIT_LIST_HEAD(&bf_head); } else { ASSERT(!list_empty(bf_q)); list_move_tail(&bf->list, &bf_head); diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index f580c2812d91..40448067e4cc 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -648,6 +648,7 @@ struct b43_wl { u8 nr_devs; bool radiotap_enabled; + bool radio_enabled; /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6456afebdba1..e71c8d9cd706 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3497,8 +3497,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (phy->ops->set_rx_antenna) phy->ops->set_rx_antenna(dev, antenna); - if (!!conf->radio_enabled != phy->radio_on) { - if (conf->radio_enabled) { + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { b43_software_rfkill(dev, false); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { @@ -4339,6 +4339,7 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; + wl->radio_enabled = 1; mutex_lock(&wl->mutex); @@ -4378,6 +4379,7 @@ static void b43_op_stop(struct ieee80211_hw *hw) if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); + wl->radio_enabled = 0; mutex_unlock(&wl->mutex); cancel_work_sync(&(wl->txpower_adjust_work)); @@ -4560,6 +4562,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) B43_WARN_ON(1); dev->phy.gmode = have_2ghz_phy; + dev->phy.radio_on = 1; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 3cfc30307a27..6c3a74964ab8 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -35,6 +35,7 @@ static /*const */ struct pcmcia_device_id b43_pcmcia_tbl[] = { PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448), + PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476), PCMCIA_DEVICE_NULL, }; diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h index 77fda148ac46..038baa8869e2 100644 --- a/drivers/net/wireless/b43legacy/b43legacy.h +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -607,6 +607,7 @@ struct b43legacy_wl { u8 nr_devs; bool radiotap_enabled; + bool radio_enabled; /* The beacon we are currently using (AP or IBSS mode). * This beacon stuff is protected by the irq_lock. */ diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index e5136fb65ddd..c4973c1942bf 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2689,8 +2689,8 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, /* Antennas for RX and management frame TX. */ b43legacy_mgmtframe_txantenna(dev, antenna_tx); - if (!!conf->radio_enabled != phy->radio_on) { - if (conf->radio_enabled) { + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { b43legacy_radio_turn_on(dev); b43legacyinfo(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) @@ -3441,6 +3441,7 @@ static int b43legacy_op_start(struct ieee80211_hw *hw) wl->beacon0_uploaded = 0; wl->beacon1_uploaded = 0; wl->beacon_templates_virgin = 1; + wl->radio_enabled = 1; mutex_lock(&wl->mutex); @@ -3479,6 +3480,7 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw) if (b43legacy_status(dev) >= B43legacy_STAT_STARTED) b43legacy_wireless_core_stop(dev); b43legacy_wireless_core_exit(dev); + wl->radio_enabled = 0; mutex_unlock(&wl->mutex); } @@ -3620,6 +3622,7 @@ static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev) have_bphy = 1; dev->phy.gmode = (have_gphy || have_bphy); + dev->phy.radio_on = 1; tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0; b43legacy_wireless_core_reset(dev, tmp); diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig index 1eccb6df46dd..030401d367d3 100644 --- a/drivers/net/wireless/iwmc3200wifi/Kconfig +++ b/drivers/net/wireless/iwmc3200wifi/Kconfig @@ -4,6 +4,15 @@ config IWM depends on CFG80211 select WIRELESS_EXT select FW_LOADER + help + The Intel Wireless Multicomm 3200 hardware is a combo + card with GPS, Bluetooth, WiMax and 802.11 radios. It + runs over SDIO and is typically found on Moorestown + based platform. This driver takes care of the 802.11 + part, which is a fullmac one. + + If you choose to build it as a module, it'll be called + iwmc3200wifi.ko. config IWM_DEBUG bool "Enable full debugging output in iwmc3200wifi" diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index e789c6e9938c..a111bda392e2 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -418,6 +418,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, continue; if (!data2->started || !hwsim_ps_rx_ok(data2, skb) || + !data->channel || !data2->channel || data->channel->center_freq != data2->channel->center_freq || !(data->group & data2->group)) continue; diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 48d81d98e12d..22ca122bd798 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -912,13 +912,14 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) } __skb_unlink(entry, &priv->tx_queue); - spin_unlock_irqrestore(&priv->tx_queue.lock, flags); frame_len = entry->len; entry_hdr = (struct p54_hdr *) entry->data; entry_data = (struct p54_tx_data *) entry_hdr->data; - priv->tx_stats[entry_data->hw_queue].len--; + if (priv->tx_stats[entry_data->hw_queue].len) + priv->tx_stats[entry_data->hw_queue].len--; priv->stats.dot11ACKFailureCount += payload->tries - 1; + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); /* * Frames in P54_QUEUE_FWSCAN and P54_QUEUE_BEACON are diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b10b0383dfa5..698b11b1cadb 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2427,11 +2427,10 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len) #ifdef PCMCIA_DEBUG if (pc_debug > 3) { - int i; - printk(KERN_DEBUG "skb->data before untranslate"); - for (i = 0; i < 64; i++) - printk("%02x ", skb->data[i]); - printk("\n" KERN_DEBUG + print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ", + DUMP_PREFIX_NONE, 16, 1, + skb->data, 64, true); + printk(KERN_DEBUG "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n", ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl, psnap->org[0], psnap->org[1], psnap->org[2]); diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 6af706408ac0..c6d300666ad8 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3556,17 +3556,8 @@ wv_82593_config(struct net_device * dev) cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ #ifdef DEBUG_I82593_SHOW - { - u_char *c = (u_char *) &cfblk; - int i; - printk(KERN_DEBUG "wavelan_cs: config block:"); - for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++) - { - if((i % 16) == 0) printk("\n" KERN_DEBUG); - printk("%02x ", *c); - } - printk("\n"); - } + print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE, + 16, 1, &cfblk, sizeof(struct i82593_conf_block), false); #endif /* Copy the config block to the i82593 */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 14a19baff214..0e6e44689cc6 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -38,7 +38,6 @@ static struct usb_device_id usb_ids[] = { /* ZD1211 */ { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0ace, 0xa211), .driver_info = DEVICE_ZD1211 }, - { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 }, @@ -61,6 +60,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ + { USB_DEVICE(0x054c, 0x0257), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0ace, 0xb215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, @@ -87,6 +87,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index 3c7a5053f1da..a07580138e81 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -109,7 +109,7 @@ static int gx_fix; /* These identify the driver base version and may not be removed. */ static const char version[] __devinitconst = KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n" - KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; + " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver"); @@ -700,12 +700,15 @@ static void yellowfin_tx_timeout(struct net_device *dev) int i; printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", yp->rx_ring[i].result_status); - printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring); + printk(KERN_CONT " %8.8x", + yp->rx_ring[i].result_status); + printk(KERN_CONT "\n"); + printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs, - yp->tx_ring[i].result_status); - printk("\n"); + printk(KERN_CONT " %4.4x /%8.8x", + yp->tx_status[i].tx_errs, + yp->tx_ring[i].result_status); + printk(KERN_CONT "\n"); } /* If the hardware is found to hang regularly, we will update the code @@ -1216,20 +1219,20 @@ static int yellowfin_close(struct net_device *dev) #if defined(__i386__) if (yellowfin_debug > 2) { - printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n", + printk(KERN_DEBUG" Tx ring at %8.8llx:\n", (unsigned long long)yp->tx_ring_dma); for (i = 0; i < TX_RING_SIZE*2; i++) - printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", + printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ', i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr, yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status); printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); for (i = 0; i < TX_RING_SIZE; i++) - printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n", + printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n", i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs, yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused); - printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n", + printk(KERN_DEBUG " Rx ring %8.8llx:\n", (unsigned long long)yp->rx_ring_dma); for (i = 0; i < RX_RING_SIZE; i++) { printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n", diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c index e1f6ce03705e..3c2270a8300c 100644 --- a/drivers/oprofile/oprofile_stats.c +++ b/drivers/oprofile/oprofile_stats.c @@ -33,6 +33,7 @@ void oprofile_reset_stats(void) atomic_set(&oprofile_stats.sample_lost_no_mm, 0); atomic_set(&oprofile_stats.sample_lost_no_mapping, 0); atomic_set(&oprofile_stats.event_lost_overflow, 0); + atomic_set(&oprofile_stats.bt_lost_no_mapping, 0); } diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c index c709ecc2b7f7..0be1d50645ab 100644 --- a/drivers/parisc/eisa_enumerator.c +++ b/drivers/parisc/eisa_enumerator.c @@ -101,7 +101,7 @@ static int configure_memory(const unsigned char *buf, printk("memory %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(mem_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -191,7 +191,7 @@ static int configure_port(const unsigned char *buf, struct resource *io_parent, printk("ioports %lx-%lx ", (unsigned long)res->start, (unsigned long)res->end); result = request_resource(io_parent, res); if (result < 0) { - printk("\n" KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); + printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n"); return result; } } @@ -224,7 +224,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_BYTE: s=1; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outb((inb(get_16(buf+len+1) & get_8(buf+len+3)) | get_8(buf+len+4)), get_16(buf+len+1)); @@ -249,7 +249,7 @@ static int configure_port_init(const unsigned char *buf) case HPEE_PORT_INIT_WIDTH_DWORD: s=4; if (c & HPEE_PORT_INIT_MASK) { - printk("\n" KERN_WARNING "port_init: unverified mask attribute\n"); + printk(KERN_WARNING "port_init: unverified mask attribute\n"); outl((inl(get_16(buf+len+1) & get_32(buf+len+3)) | get_32(buf+len+7)), get_16(buf+len+1)); @@ -259,7 +259,7 @@ static int configure_port_init(const unsigned char *buf) break; default: - printk("\n" KERN_ERR "Invalid port init word %02x\n", c); + printk(KERN_ERR "Invalid port init word %02x\n", c); return 0; } @@ -297,7 +297,7 @@ static int configure_type_string(const unsigned char *buf) /* just skip past the type field */ len = get_8(buf); if (len > 80) { - printk("\n" KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); + printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len); } return 1+len; @@ -398,7 +398,7 @@ static int parse_slot_config(int slot, } if (p0 + function_len < pos) { - printk("\n" KERN_ERR "eisa_enumerator: function %d length mis-match " + printk(KERN_ERR "eisa_enumerator: function %d length mis-match " "got %d, expected %d\n", num_func, pos-p0, function_len); res=-1; diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 360fb67a30d7..ebc9b8dca881 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3600,6 +3600,9 @@ static void intel_iommu_unmap_range(struct iommu_domain *domain, { struct dmar_domain *dmar_domain = domain->priv; + if (!size) + return; + dma_pte_clear_range(dmar_domain, iova >> VTD_PAGE_SHIFT, (iova + size - 1) >> VTD_PAGE_SHIFT); diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 9ad97ea836e8..8eb04230fec7 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -472,7 +472,8 @@ static int __init init_tcic(void) init_timer(&poll_timer); /* Build interrupt mask */ - printk(", %d sockets\n" KERN_INFO " irq list (", sockets); + printk(KERN_CONT ", %d sockets\n", sockets); + printk(KERN_INFO " irq list ("); if (irq_list_count == 0) mask = irq_mask; else diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 4ac2311c00af..ca508564a181 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -171,7 +171,7 @@ static int hp_wmi_tablet_state(void) static int hp_wmi_set_block(void *data, bool blocked) { unsigned long b = (unsigned long) data; - int query = BIT(b + 8) | ((!!blocked) << b); + int query = BIT(b + 8) | ((!blocked) << b); return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query); } diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 0471f8800483..4240b05aef6d 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -2826,8 +2826,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); /* Maybe it is sufficient just to release the ST-DMA lock... (if * possible at all) At least, we should check if the lock could be diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index b12ad7c7c673..18735b39b3d3 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -75,8 +75,9 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd * int i; printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd); for (i = 0; i < cmd->cmd_len; ++i) - printk(" %.2x", cmd->cmnd[i]); - printk("\n" KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", + printk(KERN_CONT " %.2x", cmd->cmnd[i]); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n", scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd)); } #endif diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ef142fd47a83..9230402c45af 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -619,7 +619,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) if (strcmp(current->comm, cmd) && printk_ratelimit()) { printk(KERN_WARNING "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--" - "guessing data in;\n" KERN_WARNING " " + "guessing data in;\n " "program %s not setting count and/or reply_len properly\n", old_hdr.reply_len - (int)SZ_SG_HEADER, input_size, (unsigned int) cmnd[0], @@ -1656,6 +1656,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd) md->nr_entries = req_schp->k_use_sg; md->offset = 0; md->null_mapped = hp->dxferp ? 0 : 1; + if (dxfer_dir == SG_DXFER_TO_FROM_DEV) + md->from_user = 1; + else + md->from_user = 0; } if (iov_count) { diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index bcaba86060ab..75da6e58ce55 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -2860,8 +2860,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd) */ local_irq_restore(flags); - printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully\n" - KERN_INFO " before abortion\n", HOSTNO); + printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO); return SCSI_ABORT_NOT_RUNNING; } diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 6160e03f410c..e7108e75653d 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -60,11 +60,12 @@ struct serial_private { static void moan_device(const char *str, struct pci_dev *dev) { - printk(KERN_WARNING "%s: %s\n" - KERN_WARNING "Please send the output of lspci -vv, this\n" - KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" - KERN_WARNING "manufacturer and name of serial board or\n" - KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", pci_name(dev), str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 66f52674ca0c..8e2feb563347 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -707,24 +707,25 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; + unsigned short ssr_status, scr_status, err_enabled; struct uart_port *port = ptr; irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port, SCxSR); scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE)) ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE)) ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); return ret; diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index fbfadbac67e8..100e7a5c5ea1 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) ssb_printk("."); err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Failed to write to SPROM.\n"); failed = 1; break; @@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) } err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); if (err) { - ssb_printk("\n" KERN_NOTICE PFX + ssb_printk(KERN_NOTICE PFX "Could not disable SPROM write access.\n"); failed = 1; } @@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus, sprom->board_rev = tuple.TupleData[1]; break; case SSB_PCMCIA_CIS_PA: - GOTO_ERROR_ON(tuple.TupleDataLen != 9, + GOTO_ERROR_ON((tuple.TupleDataLen != 9) && + (tuple.TupleDataLen != 10), "pa tpl size"); sprom->pa0b0 = tuple.TupleData[1] | ((u16)tuple.TupleData[2] << 8); @@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus, sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; break; case SSB_PCMCIA_CIS_BFLAGS: - GOTO_ERROR_ON(tuple.TupleDataLen != 3, + GOTO_ERROR_ON((tuple.TupleDataLen != 3) && + (tuple.TupleDataLen != 5), "bfl tpl size"); sprom->boardflags_lo = tuple.TupleData[1] | ((u16)tuple.TupleData[2] << 8); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index ce3f453f02ef..95ccfa0b9fc5 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -648,7 +648,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) struct urb *urb; int length; unsigned long flags; - char buffer[4]; /* Any root hubs with > 31 ports? */ + char buffer[6]; /* Any root hubs with > 31 ports? */ if (unlikely(!hcd->rh_registered)) return; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1576a0520adf..0c03471f0d41 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -337,10 +337,10 @@ config USB_R8A66597_HCD config SUPERH_ON_CHIP_R8A66597 boolean "Enable SuperH on-chip R8A66597 USB" - depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724) help This driver enables support for the on-chip R8A66597 in the - SH7366 and SH7723 processors. + SH7366, SH7723 and SH7724 processors. config USB_WHCI_HCD tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index fb8163d181ab..a21efcd10b78 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -226,9 +226,10 @@ static int clcdfb_set_par(struct fb_info *info) clcdfb_enable(fb, regs.cntl); #ifdef DEBUG - printk(KERN_INFO "CLCD: Registers set to\n" - KERN_INFO " %08x %08x %08x %08x\n" - KERN_INFO " %08x %08x %08x %08x\n", + printk(KERN_INFO + "CLCD: Registers set to\n" + " %08x %08x %08x %08x\n" + " %08x %08x %08x %08x\n", readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1), readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3), readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS), diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 497ff8af03ed..8cd279be74e5 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2405,6 +2405,9 @@ static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive) return 0; } +/* fbhw->encode_fix() must be called with fb_info->mm_lock held + * if it is called after the register_framebuffer() - not a case here + */ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) { struct atafb_par par; @@ -2414,9 +2417,7 @@ static int atafb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) if (err) return err; memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - mutex_lock(&info->mm_lock); err = fbhw->encode_fix(fix, &par); - mutex_unlock(&info->mm_lock); return err; } diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index cb88394ba995..da05f0801bb7 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -261,6 +261,9 @@ static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo) /** * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory * @sinfo: the frame buffer to allocate memory for + * + * This function is called only from the atmel_lcdfb_probe() + * so no locking by fb_info->mm_lock around smem_len setting is needed. */ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) { @@ -270,9 +273,7 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo) smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); - mutex_lock(&info->mm_lock); info->fix.smem_len = max(smem_len, sinfo->smem_len); - mutex_unlock(&info->mm_lock); info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len, (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 53eb39652791..53ea05645ff8 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1513,6 +1513,8 @@ register_framebuffer(struct fb_info *fb_info) if (!registered_fb[i]) break; fb_info->node = i; + mutex_init(&fb_info->lock); + mutex_init(&fb_info->mm_lock); fb_info->dev = device_create(fb_class, fb_info->device, MKDEV(FB_MAJOR, i), NULL, "fb%d", i); diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index afc04df39a03..d4a2c11d9809 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -62,9 +62,6 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev) mutex_init(&info->bl_curve_mutex); #endif - mutex_init(&info->lock); - mutex_init(&info->mm_lock); - return info; #undef PADDING #undef BYTES_PER_LONG diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 0bf2190928d0..72d68b3dc478 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1223,12 +1223,6 @@ static int __devinit install_fb(struct fb_info *info) return -EINVAL; } - if (fsl_diu_set_par(info)) { - printk(KERN_ERR "fb_set_par failed"); - fb_dealloc_cmap(&info->cmap); - return -EINVAL; - } - if (register_framebuffer(info) < 0) { printk(KERN_ERR "register_framebuffer failed"); unmap_video_memory(info); diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 020db7fc9153..e7116a6d82d3 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; -static u32 pseudo_palette[16]; -static struct fb_info fb_info; - static inline void hitfb_accel_wait(void) { while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ; @@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = { static int __init hitfb_probe(struct platform_device *dev) { unsigned short lcdclor, ldr3, ldvndr; + struct fb_info *info; + int ret; if (fb_get_options("hitfb", NULL)) return -ENODEV; @@ -384,32 +383,53 @@ static int __init hitfb_probe(struct platform_device *dev) break; } - fb_info.fbops = &hitfb_ops; - fb_info.var = hitfb_var; - fb_info.fix = hitfb_fix; - fb_info.pseudo_palette = pseudo_palette; - fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | + info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev); + if (unlikely(!info)) + return -ENOMEM; + + info->fbops = &hitfb_ops; + info->var = hitfb_var; + info->fix = hitfb_fix; + info->pseudo_palette = info->par; + info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA; - fb_info.screen_base = (void *)hitfb_fix.smem_start; + info->screen_base = (void *)hitfb_fix.smem_start; - fb_alloc_cmap(&fb_info.cmap, 256, 0); + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (unlikely(ret < 0)) + goto err_fb; - if (register_framebuffer(&fb_info) < 0) - return -EINVAL; + ret = register_framebuffer(info); + if (unlikely(ret < 0)) + goto err; + + platform_set_drvdata(dev, info); printk(KERN_INFO "fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); + info->node, info->fix.id); + return 0; + +err: + fb_dealloc_cmap(&info->cmap); +err_fb: + framebuffer_release(info); + return ret; } static int __exit hitfb_remove(struct platform_device *dev) { - return unregister_framebuffer(&fb_info); + struct fb_info *info = platform_get_drvdata(dev); + + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); + + return 0; } -#ifdef CONFIG_PM -static int hitfb_suspend(struct platform_device *dev, pm_message_t state) +static int hitfb_suspend(struct device *dev) { u16 v; @@ -421,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state) return 0; } -static int hitfb_resume(struct platform_device *dev) +static int hitfb_resume(struct device *dev) { u16 v; @@ -435,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev) return 0; } -#endif + +static struct dev_pm_ops hitfb_dev_pm_ops = { + .suspend = hitfb_suspend, + .resume = hitfb_resume, +}; static struct platform_driver hitfb_driver = { .probe = hitfb_probe, .remove = __exit_p(hitfb_remove), -#ifdef CONFIG_PM - .suspend = hitfb_suspend, - .resume = hitfb_resume, -#endif .driver = { .name = "hitfb", + .owner = THIS_MODULE, + .pm = &hitfb_dev_pm_ops, }, }; diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 71960672d721..5743ea25e818 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -2060,8 +2060,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev, fb_var_to_videomode(&mode, &info->var); fb_add_videomode(&mode, &info->modelist); - encode_fix(&info->fix, info); - + i810fb_init_ringbuffer(info); err = register_framebuffer(info); diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/matrox/matroxfb_DAC1064.c index 0ce3b0a89798..a74e5da17aa0 100644 --- a/drivers/video/matrox/matroxfb_DAC1064.c +++ b/drivers/video/matrox/matroxfb_DAC1064.c @@ -454,9 +454,9 @@ static void DAC1064_restore_2(WPMINFO2) { dprintk(KERN_DEBUG "DAC1064regs "); for (i = 0; i < sizeof(MGA1064_DAC_regs); i++) { dprintk("R%02X=%02X ", MGA1064_DAC_regs[i], ACCESS_FBINFO(hw).DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DAC1064clk "); + dprintk(KERN_DEBUG "DAC1064clk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, ACCESS_FBINFO(hw).DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c index 13524821e242..4e825112a601 100644 --- a/drivers/video/matrox/matroxfb_Ti3026.c +++ b/drivers/video/matrox/matroxfb_Ti3026.c @@ -651,9 +651,9 @@ static void Ti3026_restore(WPMINFO2) { dprintk(KERN_DEBUG "3026DACregs "); for (i = 0; i < 21; i++) { dprintk("R%02X=%02X ", DACseq[i], hw->DACreg[i]); - if ((i & 0x7) == 0x7) dprintk("\n" KERN_DEBUG "continuing... "); + if ((i & 0x7) == 0x7) dprintk(KERN_DEBUG "continuing... "); } - dprintk("\n" KERN_DEBUG "DACclk "); + dprintk(KERN_DEBUG "DACclk "); for (i = 0; i < 6; i++) dprintk("C%02X=%02X ", i, hw->DACclk[i]); dprintk("\n"); diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 76bc51b616d1..0c1049b308bf 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -1876,7 +1876,6 @@ static int initMatrox2(WPMINFO struct board* b){ } matroxfb_init_fix(PMINFO2); ACCESS_FBINFO(fbcon.screen_base) = vaddr_va(ACCESS_FBINFO(video.vbase)); - matroxfb_update_fix(PMINFO2); /* Normalize values (namely yres_virtual) */ matroxfb_check_var(&vesafb_defined, &ACCESS_FBINFO(fbcon)); /* And put it into "current" var. Do NOT program hardware yet, or we'll not take over @@ -2083,7 +2082,6 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm spin_lock_init(&ACCESS_FBINFO(lock.accel)); init_rwsem(&ACCESS_FBINFO(crtc2.lock)); init_rwsem(&ACCESS_FBINFO(altout.lock)); - mutex_init(&ACCESS_FBINFO(fbcon).lock); mutex_init(&ACCESS_FBINFO(fbcon).mm_lock); ACCESS_FBINFO(irq_flags) = 0; init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait)); diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c index 909e10a11898..ebcb5c6b4962 100644 --- a/drivers/video/matrox/matroxfb_crtc2.c +++ b/drivers/video/matrox/matroxfb_crtc2.c @@ -289,16 +289,18 @@ static int matroxfb_dh_release(struct fb_info* info, int user) { #undef m2info } +/* + * This function is called before the register_framebuffer so + * no locking is needed. + */ static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) { struct fb_fix_screeninfo *fix = &m2info->fbcon.fix; strcpy(fix->id, "MATROX DH"); - mutex_lock(&m2info->fbcon.mm_lock); fix->smem_start = m2info->video.base; fix->smem_len = m2info->video.len_usable; - mutex_unlock(&m2info->fbcon.mm_lock); fix->ypanstep = 1; fix->ywrapstep = 0; fix->xpanstep = 8; /* TBD */ diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 567fb944bd2a..f8778cde2183 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -1365,11 +1365,6 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) init_completion(&mx3fbi->flip_cmpl); disable_irq(ichan->eof_irq); dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); - ret = mx3fb_set_par(fbi); - if (ret < 0) - goto esetpar; - - mx3fb_blank(FB_BLANK_UNBLANK, fbi); dev_info(dev, "registered, using mode %s\n", fb_mode); diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index da983b720f08..8f24564f77b0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -31,7 +31,7 @@ struct sh_mobile_lcdc_chan { unsigned long enabled; /* ME and SE in LDCNT2R */ struct sh_mobile_lcdc_chan_cfg cfg; u32 pseudo_palette[PALETTE_NR]; - struct fb_info info; + struct fb_info *info; dma_addr_t dma_handle; struct fb_deferred_io defio; struct scatterlist *sglist; @@ -442,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* set bpp format in PKF[4:0] */ tmp = lcdc_read_chan(ch, LDDFR); tmp &= ~(0x0001001f); - tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0; + tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0; lcdc_write_chan(ch, LDDFR, tmp); /* point out our frame buffer */ - lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start); + lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start); /* set line size */ - lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length); + lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length); /* setup deferred io if SYS bus */ tmp = ch->cfg.sys_bus_cfg.deferred_io_msec; if (ch->ldmt1r_value & (1 << 12) && tmp) { ch->defio.deferred_io = sh_mobile_lcdc_deferred_io; ch->defio.delay = msecs_to_jiffies(tmp); - ch->info.fbdefio = &ch->defio; - fb_deferred_io_init(&ch->info); + ch->info->fbdefio = &ch->defio; + fb_deferred_io_init(ch->info); /* one-shot mode */ lcdc_write_chan(ch, LDSM1R, 1); @@ -503,12 +503,12 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) * flush frame, and wait for frame end interrupt * clean up deferred io and enable clock */ - if (ch->info.fbdefio) { + if (ch->info->fbdefio) { ch->frame_end = 0; - schedule_delayed_work(&ch->info.deferred_work, 0); + schedule_delayed_work(&ch->info->deferred_work, 0); wait_event(ch->frame_end_wait, ch->frame_end); - fb_deferred_io_cleanup(&ch->info); - ch->info.fbdefio = NULL; + fb_deferred_io_cleanup(ch->info); + ch->info->fbdefio = NULL; sh_mobile_lcdc_clk_on(priv); } @@ -817,9 +817,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1); for (i = 0; i < j; i++) { - info = &priv->ch[i].info; cfg = &priv->ch[i].cfg; + priv->ch[i].info = framebuffer_alloc(0, &pdev->dev); + if (!priv->ch[i].info) { + dev_err(&pdev->dev, "unable to allocate fb_info\n"); + error = -ENOMEM; + break; + } + + info = priv->ch[i].info; info->fbops = &sh_mobile_lcdc_ops; info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres; info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres; @@ -872,7 +879,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) for (i = 0; i < j; i++) { struct sh_mobile_lcdc_chan *ch = priv->ch + i; - info = &ch->info; + info = ch->info; if (info->fbdefio) { priv->ch->sglist = vmalloc(sizeof(struct scatterlist) * @@ -915,15 +922,15 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) int i; for (i = 0; i < ARRAY_SIZE(priv->ch); i++) - if (priv->ch[i].info.dev) - unregister_framebuffer(&priv->ch[i].info); + if (priv->ch[i].info->dev) + unregister_framebuffer(priv->ch[i].info); sh_mobile_lcdc_stop(priv); for (i = 0; i < ARRAY_SIZE(priv->ch); i++) { - info = &priv->ch[i].info; + info = priv->ch[i].info; - if (!info->device) + if (!info || !info->device) continue; if (priv->ch[i].sglist) @@ -932,6 +939,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, info->fix.smem_len, info->screen_base, priv->ch[i].dma_handle); fb_dealloc_cmap(&info->cmap); + framebuffer_release(info); } #ifdef CONFIG_HAVE_CLK diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 98f24f0ec00d..924d79462780 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -1540,9 +1540,6 @@ static int sm501fb_init_fb(struct fb_info *fb, if (ret) dev_err(info->dev, "check_var() failed on initial setup?\n"); - /* ensure we've activated our new configuration */ - (fb->fbops->fb_set_par)(fb); - return 0; } @@ -1624,6 +1621,8 @@ static int __devinit sm501fb_start_one(struct sm501fb_info *info, if (!fbi) return 0; + mutex_init(&info->fb[head]->mm_lock); + ret = sm501fb_init_fb(info->fb[head], head, drvname); if (ret) { dev_err(info->dev, "cannot initialise fb %s\n", drvname); diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index eec9dcb7f599..6120f0c526fe 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -1115,10 +1115,9 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref) if the device name contains the string "DX" and tell the user how to reconfigure the card. */ if (strstr(sti->outptr.dev_name, "DX")) { - printk(KERN_WARNING "WARNING: stifb framebuffer driver does not " - "support '%s' in double-buffer mode.\n" - KERN_WARNING "WARNING: Please disable the double-buffer mode " - "in IPL menu (the PARISC-BIOS).\n", + printk(KERN_WARNING +"WARNING: stifb framebuffer driver does not support '%s' in double-buffer mode.\n" +"WARNING: Please disable the double-buffer mode in IPL menu (the PARISC-BIOS).\n", sti->outptr.dev_name); goto out_err0; } diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 8a141c2c637b..2376f688ec8b 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -748,8 +748,6 @@ int __init w100fb_probe(struct platform_device *pdev) goto out; } - w100fb_set_par(info); - if (register_framebuffer(info) < 0) { err = -EINVAL; goto out; diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c index 5c7011cda6a6..751c003864ad 100644 --- a/drivers/watchdog/bcm47xx_wdt.c +++ b/drivers/watchdog/bcm47xx_wdt.c @@ -161,7 +161,7 @@ static long bcm47xx_wdt_ioctl(struct file *file, { void __user *argp = (void __user *)arg; int __user *p = argp; - int new_value, retval = -EINVAL;; + int new_value, retval = -EINVAL; switch (cmd) { case WDIOC_GETSUPPORT: diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index ee1caae4d33b..016245419fad 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -38,7 +38,7 @@ static unsigned long oscr_freq; static unsigned long sa1100wdt_users; -static int pre_margin; +static unsigned int pre_margin; static int boot_status; /* @@ -84,6 +84,7 @@ static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "SA1100/PXA255 Watchdog", + .firmware_version = 1, }; static long sa1100dog_ioctl(struct file *file, unsigned int cmd, @@ -118,7 +119,7 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, if (ret) break; - if (time <= 0 || time > 255) { + if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) { ret = -EINVAL; break; } diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 916890abffdd..f201accc4e3d 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -89,6 +89,11 @@ static void w83627hf_select_wd_register(void) c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */ outb_p(0x2b, WDT_EFER); outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */ + } else if (c == 0x88) { /* W83627EHF */ + outb_p(0x2d, WDT_EFER); /* select GPIO5 */ + c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */ + outb_p(0x2d, WDT_EFER); + outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */ } outb_p(0x07, WDT_EFER); /* point to logical device number reg */ diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c index 883b5f79673a..a6c12dec91a1 100644 --- a/drivers/watchdog/w83697ug_wdt.c +++ b/drivers/watchdog/w83697ug_wdt.c @@ -149,8 +149,10 @@ static void wdt_ctrl(int timeout) { spin_lock(&io_lock); - if (w83697ug_select_wd_register() < 0) + if (w83697ug_select_wd_register() < 0) { + spin_unlock(&io_lock); return; + } outb_p(0xF4, WDT_EFER); /* Select CRF4 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */ |