summaryrefslogtreecommitdiff
path: root/include/linux/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mtd')
-rw-r--r--include/linux/mtd/blktrans.h3
-rw-r--r--include/linux/mtd/cfi.h3
-rw-r--r--include/linux/mtd/latch-addr-flash.h29
-rw-r--r--include/linux/mtd/nand.h9
-rw-r--r--include/linux/mtd/nand_bch.h72
-rw-r--r--include/linux/mtd/onenand.h1
-rw-r--r--include/linux/mtd/xip.h2
7 files changed, 114 insertions, 5 deletions
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index 26529ebd59cc..1bbd9f289245 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -36,6 +36,7 @@ struct mtd_blktrans_dev {
struct mtd_info *mtd;
struct mutex lock;
int devnum;
+ bool bg_stop;
unsigned long size;
int readonly;
int open;
@@ -62,6 +63,7 @@ struct mtd_blktrans_ops {
unsigned long block, char *buffer);
int (*discard)(struct mtd_blktrans_dev *dev,
unsigned long block, unsigned nr_blocks);
+ void (*background)(struct mtd_blktrans_dev *dev);
/* Block layer ioctls */
int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
@@ -85,6 +87,7 @@ extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
#endif /* __MTD_TRANS_H__ */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index a9baee6864af..d24925492972 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -308,7 +308,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
addr = (cmd_ofs * type) * interleave;
- /* Modify the unlock address if we are in compatiblity mode.
+ /* Modify the unlock address if we are in compatibility mode.
* For 16bit devices on 8 bit busses
* and 32bit devices on 16 bit busses
* set the low bit of the alternating bit sequence of the address.
@@ -535,6 +535,7 @@ struct cfi_fixup {
#define CFI_MFR_CONTINUATION 0x007F
#define CFI_MFR_AMD 0x0001
+#define CFI_MFR_AMIC 0x0037
#define CFI_MFR_ATMEL 0x001F
#define CFI_MFR_EON 0x001C
#define CFI_MFR_FUJITSU 0x0004
diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h
new file mode 100644
index 000000000000..e94b8e128074
--- /dev/null
+++ b/include/linux/mtd/latch-addr-flash.h
@@ -0,0 +1,29 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __LATCH_ADDR_FLASH__
+#define __LATCH_ADDR_FLASH__
+
+struct map_info;
+struct mtd_partition;
+
+struct latch_addr_flash_data {
+ unsigned int width;
+ unsigned int size;
+
+ int (*init)(void *data, int cs);
+ void (*done)(void *data);
+ void (*set_window)(unsigned long offset, void *data);
+ void *data;
+
+ unsigned int nr_parts;
+ struct mtd_partition *parts;
+};
+
+#endif
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 1f489b247a29..d44192740f6f 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -140,6 +140,7 @@ typedef enum {
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_SOFT_BCH,
} nand_ecc_modes_t;
/*
@@ -339,6 +340,7 @@ struct nand_hw_control {
* @prepad: padding information for syndrome based ecc generators
* @postpad: padding information for syndrome based ecc generators
* @layout: ECC layout control struct pointer
+ * @priv: pointer to private ecc control data
* @hwctl: function to control hardware ecc generator. Must only
* be provided if an hardware ECC is available
* @calculate: function for ecc calculation or readback from ecc hardware
@@ -362,6 +364,7 @@ struct nand_ecc_ctrl {
int prepad;
int postpad;
struct nand_ecclayout *layout;
+ void *priv;
void (*hwctl)(struct mtd_info *mtd, int mode);
int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code);
@@ -413,9 +416,9 @@ struct nand_buffers {
* @select_chip: [REPLACEABLE] select chip nr
* @block_bad: [REPLACEABLE] check, if the block is bad
* @block_markbad: [REPLACEABLE] mark the block bad
- * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
* ALE/CLE/nCE. Also used to write command and address
- * @init_size: [BOARDSPECIFIC] hardwarespecific funtion for setting
+ * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting
* mtd->oobsize, mtd->writesize and so on.
* @id_data contains the 8 bytes values of NAND_CMD_READID.
* Return with the bus width.
@@ -434,7 +437,7 @@ struct nand_buffers {
* @erase_cmd: [INTERN] erase command write function, selectable due
* to AND support.
* @scan_bbt: [REPLACEABLE] function to scan bad block table
- * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
* @state: [INTERN] the current state of the NAND device
* @oob_poi: poison value buffer
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
new file mode 100644
index 000000000000..74acf5367556
--- /dev/null
+++ b/include/linux/mtd/nand_bch.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the NAND BCH ECC implementation.
+ */
+
+#ifndef __MTD_NAND_BCH_H__
+#define __MTD_NAND_BCH_H__
+
+struct mtd_info;
+struct nand_bch_control;
+
+#if defined(CONFIG_MTD_NAND_ECC_BCH)
+
+static inline int mtd_nand_has_bch(void) { return 1; }
+
+/*
+ * Calculate BCH ecc code
+ */
+int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code);
+
+/*
+ * Detect and correct bit errors
+ */
+int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
+ u_char *calc_ecc);
+/*
+ * Initialize BCH encoder/decoder
+ */
+struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+ unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+/*
+ * Release BCH encoder/decoder resources
+ */
+void nand_bch_free(struct nand_bch_control *nbc);
+
+#else /* !CONFIG_MTD_NAND_ECC_BCH */
+
+static inline int mtd_nand_has_bch(void) { return 0; }
+
+static inline int
+nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return -1;
+}
+
+static inline int
+nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ return -1;
+}
+
+static inline struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+ unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+{
+ return NULL;
+}
+
+static inline void nand_bch_free(struct nand_bch_control *nbc) {}
+
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
+
+#endif /* __MTD_NAND_BCH_H__ */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index ae418e41d8f5..52b6f187bf49 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -198,6 +198,7 @@ struct onenand_chip {
#define ONENAND_SKIP_UNLOCK_CHECK (0x0100)
#define ONENAND_PAGEBUF_ALLOC (0x1000)
#define ONENAND_OOBBUF_ALLOC (0x2000)
+#define ONENAND_SKIP_INITIAL_UNLOCKING (0x4000)
#define ONENAND_IS_4KB_PAGE(this) \
(this->options & ONENAND_HAS_4KB_PAGE)
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index 36efcba15ecd..abed4dec5c2f 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -51,7 +51,7 @@
* return in usecs the elapsed timebetween now and the reference x as
* returned by xip_currtime().
*
- * note 1: convertion to usec can be approximated, as long as the
+ * note 1: conversion to usec can be approximated, as long as the
* returned value is <= the real elapsed time.
* note 2: this should be able to cope with a few seconds without
* overflowing.