diff options
Diffstat (limited to 'include/linux/phylink.h')
-rw-r--r-- | include/linux/phylink.h | 122 |
1 files changed, 110 insertions, 12 deletions
diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 71755c66c162..1817940a3418 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -21,6 +21,24 @@ enum { MLO_AN_FIXED, /* Fixed-link mode */ MLO_AN_INBAND, /* In-band protocol */ + /* PCS "negotiation" mode. + * PHYLINK_PCS_NEG_NONE - protocol has no inband capability + * PHYLINK_PCS_NEG_OUTBAND - some out of band or fixed link setting + * PHYLINK_PCS_NEG_INBAND_DISABLED - inband mode disabled, e.g. + * 1000base-X with autoneg off + * PHYLINK_PCS_NEG_INBAND_ENABLED - inband mode enabled + * Additionally, this can be tested using bitmasks: + * PHYLINK_PCS_NEG_INBAND - inband mode selected + * PHYLINK_PCS_NEG_ENABLED - negotiation mode enabled + */ + PHYLINK_PCS_NEG_NONE = 0, + PHYLINK_PCS_NEG_ENABLED = BIT(4), + PHYLINK_PCS_NEG_OUTBAND = BIT(5), + PHYLINK_PCS_NEG_INBAND = BIT(6), + PHYLINK_PCS_NEG_INBAND_DISABLED = PHYLINK_PCS_NEG_INBAND, + PHYLINK_PCS_NEG_INBAND_ENABLED = PHYLINK_PCS_NEG_INBAND | + PHYLINK_PCS_NEG_ENABLED, + /* MAC_SYM_PAUSE and MAC_ASYM_PAUSE are used when configuring our * autonegotiation advertisement. They correspond to the PAUSE and * ASM_DIR bits defined by 802.3, respectively. @@ -80,6 +98,72 @@ static inline bool phylink_autoneg_inband(unsigned int mode) } /** + * phylink_pcs_neg_mode() - helper to determine PCS inband mode + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @interface: interface mode to be used + * @advertising: adertisement ethtool link mode mask + * + * Determines the negotiation mode to be used by the PCS, and returns + * one of: + * + * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband + * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY) + * will be used. + * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg + * disabled + * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled + * + * Note: this is for cases where the PCS itself is involved in negotiation + * (e.g. Clause 37, SGMII and similar) not Clause 73. + */ +static inline unsigned int phylink_pcs_neg_mode(unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising) +{ + unsigned int neg_mode; + + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_USXGMII: + /* These protocols are designed for use with a PHY which + * communicates its negotiation result back to the MAC via + * inband communication. Note: there exist PHYs that run + * with SGMII but do not send the inband data. + */ + if (!phylink_autoneg_inband(mode)) + neg_mode = PHYLINK_PCS_NEG_OUTBAND; + else + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; + break; + + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + /* 1000base-X is designed for use media-side for Fibre + * connections, and thus the Autoneg bit needs to be + * taken into account. We also do this for 2500base-X + * as well, but drivers may not support this, so may + * need to override this. + */ + if (!phylink_autoneg_inband(mode)) + neg_mode = PHYLINK_PCS_NEG_OUTBAND; + else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + advertising)) + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED; + else + neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED; + break; + + default: + neg_mode = PHYLINK_PCS_NEG_NONE; + break; + } + + return neg_mode; +} + +/** * struct phylink_link_state - link state structure * @advertising: ethtool bitmask containing advertised link modes * @lp_advertising: ethtool bitmask containing link partner advertised link @@ -436,6 +520,7 @@ struct phylink_pcs_ops; /** * struct phylink_pcs - PHYLINK PCS instance * @ops: a pointer to the &struct phylink_pcs_ops structure + * @neg_mode: provide PCS neg mode via "mode" argument * @poll: poll the PCS for link changes * * This structure is designed to be embedded within the PCS private data, @@ -443,6 +528,7 @@ struct phylink_pcs_ops; */ struct phylink_pcs { const struct phylink_pcs_ops *ops; + bool neg_mode; bool poll; }; @@ -460,12 +546,12 @@ struct phylink_pcs_ops { const struct phylink_link_state *state); void (*pcs_get_state)(struct phylink_pcs *pcs, struct phylink_link_state *state); - int (*pcs_config)(struct phylink_pcs *pcs, unsigned int mode, + int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac); void (*pcs_an_restart)(struct phylink_pcs *pcs); - void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int mode, + void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, int speed, int duplex); }; @@ -508,7 +594,7 @@ void pcs_get_state(struct phylink_pcs *pcs, /** * pcs_config() - Configure the PCS mode and advertisement * @pcs: a pointer to a &struct phylink_pcs. - * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @neg_mode: link negotiation mode (see below) * @interface: interface mode to be used * @advertising: adertisement ethtool link mode mask * @permit_pause_to_mac: permit forwarding pause resolution to MAC @@ -526,8 +612,12 @@ void pcs_get_state(struct phylink_pcs *pcs, * For 1000BASE-X, the advertisement should be programmed into the PCS. * * For most 10GBASE-R, there is no advertisement. + * + * The %neg_mode argument should be tested via the phylink_mode_*() family of + * functions, or for PCS that set pcs->neg_mode true, should be tested + * against the %PHYLINK_PCS_NEG_* definitions. */ -int pcs_config(struct phylink_pcs *pcs, unsigned int mode, +int pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac); @@ -543,7 +633,7 @@ void pcs_an_restart(struct phylink_pcs *pcs); /** * pcs_link_up() - program the PCS for the resolved link configuration * @pcs: a pointer to a &struct phylink_pcs. - * @mode: link autonegotiation mode + * @neg_mode: link negotiation mode (see below) * @interface: link &typedef phy_interface_t mode * @speed: link speed * @duplex: link duplex @@ -552,8 +642,12 @@ void pcs_an_restart(struct phylink_pcs *pcs); * the resolved link parameters. For example, a PCS operating in SGMII * mode without in-band AN needs to be manually configured for the link * and duplex setting. Otherwise, this should be a no-op. + * + * The %mode argument should be tested via the phylink_mode_*() family of + * functions, or for PCS that set pcs->neg_mode true, should be tested + * against the %PHYLINK_PCS_NEG_* definitions. */ -void pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, +void pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, int speed, int duplex); #endif @@ -568,16 +662,17 @@ void phylink_generic_validate(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state); -struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *, - phy_interface_t iface, - const struct phylink_mac_ops *mac_ops); +struct phylink *phylink_create(struct phylink_config *, + const struct fwnode_handle *, + phy_interface_t, + const struct phylink_mac_ops *); void phylink_destroy(struct phylink *); bool phylink_expects_phy(struct phylink *pl); int phylink_connect_phy(struct phylink *, struct phy_device *); int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags); int phylink_fwnode_phy_connect(struct phylink *pl, - struct fwnode_handle *fwnode, + const struct fwnode_handle *fwnode, u32 flags); void phylink_disconnect_phy(struct phylink *); @@ -650,11 +745,14 @@ void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs, struct phylink_link_state *state); int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface, const unsigned long *advertising); -int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode, +int phylink_mii_c22_pcs_config(struct mdio_device *pcs, phy_interface_t interface, - const unsigned long *advertising); + const unsigned long *advertising, + unsigned int neg_mode); void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs); +void phylink_resolve_c73(struct phylink_link_state *state); + void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, struct phylink_link_state *state); |