diff options
Diffstat (limited to 'include/linux/platform_data')
-rw-r--r-- | include/linux/platform_data/bfin_rotary.h | 117 | ||||
-rw-r--r-- | include/linux/platform_data/dma-dw.h | 6 | ||||
-rw-r--r-- | include/linux/platform_data/dma-mmp_tdma.h | 7 |
3 files changed, 128 insertions, 2 deletions
diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h new file mode 100644 index 000000000000..98829370fee2 --- /dev/null +++ b/include/linux/platform_data/bfin_rotary.h @@ -0,0 +1,117 @@ +/* + * board initialization should put one of these structures into platform_data + * and place the bfin-rotary onto platform_bus named "bfin-rotary". + * + * Copyright 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_ROTARY_H +#define _BFIN_ROTARY_H + +/* mode bitmasks */ +#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ +#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ +#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ +#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ + +#define ROT_DEBE DEBE /* Debounce Enable */ + +#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ +#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ +#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ + +struct bfin_rotary_platform_data { + /* set rotary UP KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_up_key; + /* set rotary DOWN KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_down_key; + /* set rotary BUTTON KEY_### or BTN_### */ + unsigned int rotary_button_key; + /* set rotary Relative Axis REL_### in case you prefer + * bfin-rotary to send EV_REL otherwise set 0 + */ + unsigned int rotary_rel_code; + unsigned short debounce; /* 0..17 */ + unsigned short mode; + unsigned short pm_wakeup; + unsigned short *pin_list; +}; + +/* CNT_CONFIG bitmasks */ +#define CNTE (1 << 0) /* Counter Enable */ +#define DEBE (1 << 1) /* Debounce Enable */ +#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ +#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ +#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ +#define CNTMODE_SHIFT 8 +#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ +#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ +#define BNDMODE_SHIFT 12 +#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ +#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ + +#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ +#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ +#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ +#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ +#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ + +#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ +#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ +#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ +#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ + +/* CNT_IMASK bitmasks */ +#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE (1 << 1) /* Up count Interrupt Enable */ +#define DCIE (1 << 2) /* Down count Interrupt Enable */ +#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ +#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ +#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ +#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ +#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ +#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ + +/* CNT_STATUS bitmasks */ +#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII (1 << 1) /* Up count Interrupt Identifier */ +#define DCII (1 << 2) /* Down count Interrupt Identifier */ +#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ +#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ +#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ +#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ +#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ +#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ + +/* CNT_COMMAND bitmasks */ +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ + +#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_DEBOUNCE bitmasks */ +#define DPRESCALE 0xf /* Load Counter Register */ + +#endif diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index d8155c005242..87ac14c584f2 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -13,10 +13,12 @@ #include <linux/device.h> +#define DW_DMA_MAX_NR_MASTERS 4 + /** * struct dw_dma_slave - Controller-specific information about a slave * - * @dma_dev: required DMA master device. Depricated. + * @dma_dev: required DMA master device * @src_id: src request line * @dst_id: dst request line * @src_master: src master for transfers on allocated channel. @@ -53,7 +55,7 @@ struct dw_dma_platform_data { unsigned char chan_priority; unsigned short block_size; unsigned char nr_masters; - unsigned char data_width[4]; + unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; }; #endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h index 66574ea39f97..0c72886030ef 100644 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ b/include/linux/platform_data/dma-mmp_tdma.h @@ -28,6 +28,13 @@ struct sram_platdata { int granularity; }; +#ifdef CONFIG_ARM extern struct gen_pool *sram_get_gpool(char *pool_name); +#else +static inline struct gen_pool *sram_get_gpool(char *pool_name) +{ + return NULL; +} +#endif #endif /* __DMA_MMP_TDMA_H */ |