diff options
Diffstat (limited to 'include/linux/spi/spi.h')
| -rw-r--r-- | include/linux/spi/spi.h | 68 |
1 files changed, 33 insertions, 35 deletions
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 471fe2ff9066..c459809efee4 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -21,7 +21,7 @@ #include <uapi/linux/spi/spi.h> /* Max no. of CS supported per spi device */ -#define SPI_CS_CNT_MAX 4 +#define SPI_CS_CNT_MAX 16 struct dma_chan; struct software_node; @@ -36,7 +36,7 @@ struct spi_message; * INTERFACES between SPI master-side drivers and SPI slave protocol handlers, * and SPI infrastructure. */ -extern struct bus_type spi_bus_type; +extern const struct bus_type spi_bus_type; /** * struct spi_statistics - statistics for spi transfers @@ -131,7 +131,6 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * struct spi_device - Controller side proxy for an SPI slave device * @dev: Driver model representation of the device. * @controller: SPI controller used with the device. - * @master: Copy of controller, for backwards compatibility. * @max_speed_hz: Maximum clock rate to be used with this chip * (on this board); may be changed by the device's driver. * The spi_transfer.speed_hz can override this for each transfer. @@ -185,7 +184,6 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, struct spi_device { struct device dev; struct spi_controller *controller; - struct spi_controller *master; /* Compatibility layer */ u32 max_speed_hz; u8 chip_select[SPI_CS_CNT_MAX]; u8 bits_per_word; @@ -422,8 +420,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for exclusion of multiple callers * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use - * @multi_cs_cap: indicates that the SPI Controller can assert/de-assert - * more than one chip select at once. * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -452,9 +448,11 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * the @cur_msg_completion. This flag is used to signal the context that * is running spi_finalize_current_message() that it needs to complete() * @cur_msg_mapped: message has been mapped for DMA + * @fallback: fallback to PIO if DMA transfer return failure with + * SPI_TRANS_FAIL_NO_START. + * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs. * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip * selected - * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs. * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running @@ -477,6 +475,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * * @set_cs: set the logic level of the chip select line. May be called * from interrupt context. + * @optimize_message: optimize the message for reuse + * @unoptimize_message: release resources allocated by optimize_message * @prepare_message: set up the controller to transfer a single message, * for example doing DMA mapping. Called from threaded * context. @@ -529,8 +529,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * If the driver does not set this, the SPI core takes the snapshot as * close to the driver hand-over as possible. * @irq_flags: Interrupt enable state during PTP system timestamping - * @fallback: fallback to PIO if DMA transfer return failure with - * SPI_TRANS_FAIL_NO_START. * @queue_empty: signal green light for opportunistically skipping the queue * for spi_sync transfers. * @must_async: disable all fast paths in the core @@ -710,13 +708,15 @@ struct spi_controller { bool rt; bool auto_runtime_pm; bool cur_msg_mapped; - char last_cs[SPI_CS_CNT_MAX]; - char last_cs_index_mask; - bool last_cs_mode_high; bool fallback; + bool last_cs_mode_high; + s8 last_cs[SPI_CS_CNT_MAX]; + u32 last_cs_index_mask : SPI_CS_CNT_MAX; struct completion xfer_completion; size_t max_dma_len; + int (*optimize_message)(struct spi_message *msg); + int (*unoptimize_message)(struct spi_message *msg); int (*prepare_transfer_hardware)(struct spi_controller *ctlr); int (*transfer_one_message)(struct spi_controller *ctlr, struct spi_message *mesg); @@ -1113,16 +1113,19 @@ struct spi_transfer { * @spi: SPI device to which the transaction is queued * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual * addresses for each transfer buffer + * @pre_optimized: peripheral driver pre-optimized the message + * @optimized: the message is in the optimized state + * @prepared: spi_prepare_message was called for the this message + * @status: zero for success, else negative errno * @complete: called to report transaction completions * @context: the argument to complete() when it's called * @frame_length: the total number of bytes in the message * @actual_length: the total number of bytes that were transferred in all * successful segments - * @status: zero for success, else negative errno * @queue: for use by whichever driver currently owns the message * @state: for use by whichever driver currently owns the message + * @opt_state: for use by whichever driver currently owns the message * @resources: for resource management when the SPI message is processed - * @prepared: spi_prepare_message was called for the this message * * A @spi_message is used to execute an atomic sequence of data transfers, * each represented by a struct spi_transfer. The sequence is "atomic" @@ -1145,6 +1148,11 @@ struct spi_message { unsigned is_dma_mapped:1; + /* spi_optimize_message() was called for this message */ + bool pre_optimized; + /* __spi_optimize_message() was called for this message */ + bool optimized; + /* spi_prepare_message() was called for this message */ bool prepared; @@ -1174,6 +1182,11 @@ struct spi_message { */ struct list_head queue; void *state; + /* + * Optional state for use by controller driver between calls to + * __spi_optimize_message() and __spi_unoptimize_message(). + */ + void *opt_state; /* List of spi_res resources when the SPI message is processed */ struct list_head resources; @@ -1257,6 +1270,9 @@ static inline void spi_message_free(struct spi_message *m) kfree(m); } +extern int spi_optimize_message(struct spi_device *spi, struct spi_message *msg); +extern void spi_unoptimize_message(struct spi_message *msg); + extern int spi_setup(struct spi_device *spi); extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_slave_abort(struct spi_device *spi); @@ -1298,7 +1314,7 @@ spi_max_transfer_size(struct spi_device *spi) */ static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw) { - u32 bpw_mask = spi->master->bits_per_word_mask; + u32 bpw_mask = spi->controller->bits_per_word_mask; if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw))) return true; @@ -1365,12 +1381,10 @@ struct spi_replaced_transfers { extern int spi_split_transfers_maxsize(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxsize, - gfp_t gfp); + size_t maxsize); extern int spi_split_transfers_maxwords(struct spi_controller *ctlr, struct spi_message *msg, - size_t maxwords, - gfp_t gfp); + size_t maxwords); /*---------------------------------------------------------------------------*/ @@ -1670,20 +1684,4 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer) return list_is_last(&xfer->transfer_list, &ctlr->cur_msg->transfers); } -/* Compatibility layer */ -#define spi_master spi_controller - -#define spi_master_get_devdata(_ctlr) spi_controller_get_devdata(_ctlr) -#define spi_master_set_devdata(_ctlr, _data) \ - spi_controller_set_devdata(_ctlr, _data) -#define spi_master_get(_ctlr) spi_controller_get(_ctlr) -#define spi_master_put(_ctlr) spi_controller_put(_ctlr) -#define spi_master_suspend(_ctlr) spi_controller_suspend(_ctlr) -#define spi_master_resume(_ctlr) spi_controller_resume(_ctlr) - -#define spi_register_master(_ctlr) spi_register_controller(_ctlr) -#define devm_spi_register_master(_dev, _ctlr) \ - devm_spi_register_controller(_dev, _ctlr) -#define spi_unregister_master(_ctlr) spi_unregister_controller(_ctlr) - #endif /* __LINUX_SPI_H */ |