summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r--include/net/cfg80211.h270
1 files changed, 224 insertions, 46 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6d02e12e4702..3bcdd20ace66 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -374,6 +374,7 @@ struct ieee80211_sta_he_cap {
* and NSS Set field"
*
* @only_20mhz: MCS/NSS support for 20 MHz-only STA.
+ * @bw: MCS/NSS support for 80, 160 and 320 MHz
* @bw._80: MCS/NSS support for BW <= 80 MHz
* @bw._160: MCS/NSS support for BW = 160 MHz
* @bw._320: MCS/NSS support for BW = 320 MHz
@@ -420,6 +421,7 @@ struct ieee80211_sta_eht_cap {
* @he_cap: holds the HE capabilities
* @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a
* 6 GHz band channel (and 0 may be valid value).
+ * @eht_cap: STA's EHT capabilities
* @vendor_elems: vendor element(s) to advertise
* @vendor_elems.data: vendor element(s) data
* @vendor_elems.len: vendor element(s) length
@@ -495,7 +497,7 @@ struct ieee80211_edmg {
* This structure describes most essential parameters needed
* to describe 802.11ah S1G capabilities for a STA.
*
- * @s1g_supported: is STA an S1G STA
+ * @s1g: is STA an S1G STA
* @cap: S1G capabilities information
* @nss_mcs: Supported NSS MCS set
*/
@@ -1061,6 +1063,7 @@ struct survey_info {
};
#define CFG80211_MAX_WEP_KEYS 4
+#define CFG80211_MAX_NUM_AKM_SUITES 10
/**
* struct cfg80211_crypto_settings - Crypto settings
@@ -1112,7 +1115,7 @@ struct cfg80211_crypto_settings {
int n_ciphers_pairwise;
u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
int n_akm_suites;
- u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+ u32 akm_suites[CFG80211_MAX_NUM_AKM_SUITES];
bool control_port;
__be16 control_port_ethertype;
bool control_port_no_encrypt;
@@ -1158,6 +1161,7 @@ struct cfg80211_mbssid_elems {
/**
* struct cfg80211_beacon_data - beacon data
+ * @link_id: the link ID for the AP MLD link sending this beacon
* @head: head portion of beacon (before TIM IE)
* or %NULL if not changed
* @tail: tail portion of beacon (after TIM IE)
@@ -1188,6 +1192,8 @@ struct cfg80211_mbssid_elems {
* attribute is present in beacon data or not.
*/
struct cfg80211_beacon_data {
+ unsigned int link_id;
+
const u8 *head, *tail;
const u8 *beacon_ies;
const u8 *proberesp_ies;
@@ -1290,6 +1296,8 @@ struct cfg80211_unsol_bcast_probe_resp {
* @ht_cap: HT capabilities (or %NULL if HT isn't enabled)
* @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled)
* @he_cap: HE capabilities (or %NULL if HE isn't enabled)
+ * @eht_cap: EHT capabilities (or %NULL if EHT isn't enabled)
+ * @eht_oper: EHT operation IE (or %NULL if EHT isn't enabled)
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
* @twt_responder: Enable Target Wait Time
@@ -1326,6 +1334,8 @@ struct cfg80211_ap_settings {
const struct ieee80211_vht_cap *vht_cap;
const struct ieee80211_he_cap_elem *he_cap;
const struct ieee80211_he_operation *he_oper;
+ const struct ieee80211_eht_cap_elem *eht_cap;
+ const struct ieee80211_eht_operation *eht_oper;
bool ht_required, vht_required, he_required, sae_h2e_required;
bool twt_responder;
u32 flags;
@@ -1370,8 +1380,8 @@ struct cfg80211_csa_settings {
* Used for bss color change
*
* @beacon_color_change: beacon data while performing the color countdown
- * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
- * @counter_offsets_presp: offsets of the counters within the probe response
+ * @counter_offset_beacon: offsets of the counters within the beacon (tail)
+ * @counter_offset_presp: offsets of the counters within the probe response
* @beacon_next: beacon data to be used after the color change
* @count: number of beacons until the color change
* @color: the color used after the change
@@ -1414,6 +1424,7 @@ struct iface_combination_params {
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
* @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
+ * @STATION_PARAM_APPLY_STA_TXPOWER: apply tx power for STA
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
@@ -2146,6 +2157,9 @@ struct bss_parameters {
* @plink_timeout: If no tx activity is seen from a STA we've established
* peering with for longer than this time (in seconds), then remove it
* from the STA's list of peers. Default is 30 minutes.
+ * @dot11MeshConnectedToAuthServer: if set to true then this mesh STA
+ * will advertise that it is connected to a authentication server
+ * in the mesh formation field.
* @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is
* connected to a mesh gate in mesh formation info. If false, the
* value in mesh formation is determined by the presence of root paths
@@ -2318,12 +2332,12 @@ struct cfg80211_scan_info {
/**
* struct cfg80211_scan_6ghz_params - relevant for 6 GHz only
*
- * @short_bssid: short ssid to scan for
+ * @short_ssid: short ssid to scan for
* @bssid: bssid to scan for
* @channel_idx: idx of the channel in the channel array in the scan request
* which the above info relvant to
* @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU
- * @short_ssid_valid: short_ssid is valid and can be used
+ * @short_ssid_valid: @short_ssid is valid and can be used
* @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
* 20 TUs before starting to send probe requests.
*/
@@ -2715,6 +2729,12 @@ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id)
* Authentication algorithm number, i.e., starting at the Authentication
* transaction sequence number field.
* @auth_data_len: Length of auth_data buffer in octets
+ * @link_id: if >= 0, indicates authentication should be done as an MLD,
+ * the interface address is included as the MLD address and the
+ * necessary link (with the given link_id) will be created (and
+ * given an MLD address) by the driver
+ * @ap_mld_addr: AP MLD address in case of authentication request with
+ * an AP MLD, valid iff @link_id >= 0
*/
struct cfg80211_auth_request {
struct cfg80211_bss *bss;
@@ -2725,6 +2745,21 @@ struct cfg80211_auth_request {
u8 key_len, key_idx;
const u8 *auth_data;
size_t auth_data_len;
+ s8 link_id;
+ const u8 *ap_mld_addr;
+};
+
+/**
+ * struct cfg80211_assoc_link - per-link information for MLO association
+ * @bss: the BSS pointer, see also &struct cfg80211_assoc_request::bss;
+ * if this is %NULL for a link, that link is not requested
+ * @elems: extra elements for the per-STA profile for this link
+ * @elems_len: length of the elements
+ */
+struct cfg80211_assoc_link {
+ struct cfg80211_bss *bss;
+ const u8 *elems;
+ size_t elems_len;
};
/**
@@ -2739,6 +2774,9 @@ struct cfg80211_auth_request {
* request (connect callback).
* @ASSOC_REQ_DISABLE_HE: Disable HE
* @ASSOC_REQ_DISABLE_EHT: Disable EHT
+ * @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links.
+ * Drivers shall disable MLO features for the current association if this
+ * flag is not set.
*/
enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HT = BIT(0),
@@ -2747,6 +2785,7 @@ enum cfg80211_assoc_req_flags {
CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3),
ASSOC_REQ_DISABLE_HE = BIT(4),
ASSOC_REQ_DISABLE_EHT = BIT(5),
+ CONNECT_REQ_MLO_SUPPORT = BIT(6),
};
/**
@@ -2758,6 +2797,8 @@ enum cfg80211_assoc_req_flags {
* given a reference that it must give back to cfg80211_send_rx_assoc()
* or to cfg80211_assoc_timeout(). To ensure proper refcounting, new
* association requests while already associating must be rejected.
+ * This also applies to the @links.bss parameter, which is used instead
+ * of this one (it is %NULL) for MLO associations.
* @ie: Extra IEs to add to (Re)Association Request frame or %NULL
* @ie_len: Length of ie buffer in octets
* @use_mfp: Use management frame protection (IEEE 802.11w) in this association
@@ -2782,6 +2823,11 @@ enum cfg80211_assoc_req_flags {
* with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
* @s1g_capa: S1G capability override
* @s1g_capa_mask: S1G capability override mask
+ * @links: per-link information for MLO connections
+ * @link_id: >= 0 for MLO connections, where links are given, and indicates
+ * the link on which the association request should be sent
+ * @ap_mld_addr: AP MLD address in case of MLO association request,
+ * valid iff @link_id >= 0
*/
struct cfg80211_assoc_request {
struct cfg80211_bss *bss;
@@ -2797,6 +2843,9 @@ struct cfg80211_assoc_request {
size_t fils_kek_len;
const u8 *fils_nonces;
struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
+ struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS];
+ const u8 *ap_mld_addr;
+ s8 link_id;
};
/**
@@ -3279,7 +3328,7 @@ struct cfg80211_wowlan_wakeup {
* @kck: key confirmation key (@kck_len bytes)
* @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes)
* @kek_len: length of kek
- * @kck_len length of kck
+ * @kck_len: length of kck
* @akm: akm (oui, id)
*/
struct cfg80211_gtk_rekey_data {
@@ -3641,6 +3690,7 @@ struct cfg80211_pmsr_ftm_result {
* @type: type of the measurement reported, note that we only support reporting
* one type at a time, but you can report multiple results separately and
* they're all aggregated for userspace.
+ * @ftm: FTM result
*/
struct cfg80211_pmsr_result {
u64 host_time, ap_tsf;
@@ -3779,7 +3829,7 @@ struct cfg80211_update_owe_info {
* for the entire device
* @interface_stypes: bitmap of management frame subtypes registered
* for the given interface
- * @global_mcast_rx: mcast RX is needed globally for these subtypes
+ * @global_mcast_stypes: mcast RX is needed globally for these subtypes
* @interface_mcast_stypes: mcast RX is needed on this interface
* for these subtypes
*/
@@ -3824,6 +3874,11 @@ struct mgmt_frame_regs {
* keep the struct wireless_dev's iftype updated.
* This additionally holds the RTNL to be able to do netdev changes.
*
+ * @add_intf_link: Add a new MLO link to the given interface. Note that
+ * the wdev->link[] data structure has been updated, so the new link
+ * address is available.
+ * @del_intf_link: Remove an MLO link from the given interface.
+ *
* @add_key: add a key with the given parameters. @mac_addr will be %NULL
* when adding a group key.
*
@@ -4178,6 +4233,13 @@ struct cfg80211_ops {
enum nl80211_iftype type,
struct vif_params *params);
+ int (*add_intf_link)(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ unsigned int link_id);
+ void (*del_intf_link)(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ unsigned int link_id);
+
int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index, bool pairwise, const u8 *mac_addr,
struct key_params *params);
@@ -4201,7 +4263,8 @@ struct cfg80211_ops {
struct cfg80211_ap_settings *settings);
int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_beacon_data *info);
- int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev);
+ int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev,
+ unsigned int link_id);
int (*add_station)(struct wiphy *wiphy, struct net_device *dev,
@@ -4309,6 +4372,7 @@ struct cfg80211_ops {
int (*set_bitrate_mask)(struct wiphy *wiphy,
struct net_device *dev,
+ unsigned int link_id,
const u8 *peer,
const struct cfg80211_bitrate_mask *mask);
@@ -4384,6 +4448,7 @@ struct cfg80211_ops {
int (*get_channel)(struct wiphy *wiphy,
struct wireless_dev *wdev,
+ unsigned int link_id,
struct cfg80211_chan_def *chandef);
int (*start_p2p_device)(struct wiphy *wiphy,
@@ -4420,6 +4485,7 @@ struct cfg80211_ops {
struct cfg80211_qos_map *qos_map);
int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev,
+ unsigned int link_id,
struct cfg80211_chan_def *chandef);
int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev,
@@ -4545,10 +4611,14 @@ struct cfg80211_ops {
* @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
* before connection.
* @WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK: The device supports bigger kek and kck keys
+ * @WIPHY_FLAG_SUPPORTS_MLO: This is a temporary flag gating the MLO APIs,
+ * in order to not have them reachable in normal drivers, until we have
+ * complete feature/interface combinations/etc. advertisement. No driver
+ * should set this flag for now.
*/
enum wiphy_flags {
WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK = BIT(0),
- /* use hole at 1 */
+ WIPHY_FLAG_SUPPORTS_MLO = BIT(1),
WIPHY_FLAG_SPLIT_SCAN_6GHZ = BIT(2),
WIPHY_FLAG_NETNS_OK = BIT(3),
WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
@@ -4882,6 +4952,7 @@ struct wiphy_iftype_ext_capab {
* @max_peers: maximum number of peers in a single measurement
* @report_ap_tsf: can report assoc AP's TSF for radio resource measurement
* @randomize_mac_addr: can randomize MAC address for measurement
+ * @ftm: FTM measurement data
* @ftm.supported: FTM measurement is supported
* @ftm.asap: ASAP-mode is supported
* @ftm.non_asap: non-ASAP-mode is supported
@@ -5134,6 +5205,13 @@ struct wiphy_iftype_akm_suites {
* @ema_max_profile_periodicity: maximum profile periodicity supported by
* the driver. Setting this field to a non-zero value indicates that the
* driver supports enhanced multi-BSSID advertisements (EMA AP).
+ * @max_num_akm_suites: maximum number of AKM suites allowed for
+ * configuration through %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and
+ * %NL80211_CMD_START_AP. Set to NL80211_MAX_NR_AKM_SUITES if not set by
+ * driver. If set by driver minimum allowed value is
+ * NL80211_MAX_NR_AKM_SUITES in order to avoid compatibility issues with
+ * legacy userspace and maximum allowed value is
+ * CFG80211_MAX_NUM_AKM_SUITES.
*/
struct wiphy {
struct mutex mtx;
@@ -5280,6 +5358,7 @@ struct wiphy {
u8 mbssid_max_interfaces;
u8 ema_max_profile_periodicity;
+ u16 max_num_akm_suites;
char priv[] __aligned(NETDEV_ALIGN);
};
@@ -5505,16 +5584,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
* @netdev: (private) Used to reference back to the netdev, may be %NULL
* @identifier: (private) Identifier used in nl80211 to identify this
* wireless device if it has no netdev
- * @current_bss: (private) Used by the internal configuration code
- * @chandef: (private) Used by the internal configuration code to track
- * the user-set channel definition.
- * @preset_chandef: (private) Used by the internal configuration code to
- * track the channel to be used for AP later
+ * @u: union containing data specific to @iftype
+ * @connected: indicates if connected or not (STA mode)
* @bssid: (private) Used by the internal configuration code
- * @ssid: (private) Used by the internal configuration code
- * @ssid_len: (private) Used by the internal configuration code
- * @mesh_id_len: (private) Used by the internal configuration code
- * @mesh_id_up_len: (private) Used by the internal configuration code
* @wext: (private) Used by the internal wireless extensions compat code
* @wext.ibss: (private) IBSS data part of wext handling
* @wext.connect: (private) connection handling data
@@ -5564,6 +5636,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
* @pmsr_free_wk: (private) peer measurements cleanup work
* @unprot_beacon_reported: (private) timestamp of last
* unprotected beacon report
+ * @links: array of %IEEE80211_MLD_MAX_NUM_LINKS elements containing @addr
+ * @ap and @client for each link
+ * @valid_links: bitmap describing what elements of @links are valid
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -5585,8 +5660,6 @@ struct wireless_dev {
u8 address[ETH_ALEN] __aligned(sizeof(u16));
/* currently used for IBSS and SME - might be rearranged later */
- u8 ssid[IEEE80211_MAX_SSID_LEN];
- u8 ssid_len, mesh_id_len, mesh_id_up_len;
struct cfg80211_conn *conn;
struct cfg80211_cached_keys *connect_keys;
enum ieee80211_bss_type conn_bss_type;
@@ -5598,20 +5671,17 @@ struct wireless_dev {
struct list_head event_list;
spinlock_t event_lock;
- struct cfg80211_internal_bss *current_bss; /* associated / joined */
- struct cfg80211_chan_def preset_chandef;
- struct cfg80211_chan_def chandef;
+ u8 connected:1;
bool ps;
int ps_timeout;
- int beacon_interval;
-
u32 ap_unexpected_nlportid;
u32 owner_nlportid;
bool nl_owner_dead;
+ /* FIXME: need to rework radar detection for MLO */
bool cac_started;
unsigned long cac_start_time;
unsigned int cac_time_ms;
@@ -5639,6 +5709,50 @@ struct wireless_dev {
struct work_struct pmsr_free_wk;
unsigned long unprot_beacon_reported;
+
+ union {
+ struct {
+ u8 connected_addr[ETH_ALEN] __aligned(2);
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ } client;
+ struct {
+ int beacon_interval;
+ struct cfg80211_chan_def preset_chandef;
+ struct cfg80211_chan_def chandef;
+ u8 id[IEEE80211_MAX_SSID_LEN];
+ u8 id_len, id_up_len;
+ } mesh;
+ struct {
+ struct cfg80211_chan_def preset_chandef;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ } ap;
+ struct {
+ struct cfg80211_internal_bss *current_bss;
+ struct cfg80211_chan_def chandef;
+ int beacon_interval;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u8 ssid_len;
+ } ibss;
+ struct {
+ struct cfg80211_chan_def chandef;
+ } ocb;
+ } u;
+
+ struct {
+ u8 addr[ETH_ALEN] __aligned(2);
+ union {
+ struct {
+ unsigned int beacon_interval;
+ struct cfg80211_chan_def chandef;
+ } ap;
+ struct {
+ struct cfg80211_internal_bss *current_bss;
+ } client;
+ };
+ } links[IEEE80211_MLD_MAX_NUM_LINKS];
+ u16 valid_links;
};
static inline const u8 *wdev_address(struct wireless_dev *wdev)
@@ -5668,6 +5782,32 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
}
/**
+ * wdev_chandef - return chandef pointer from wireless_dev
+ * @wdev: the wdev
+ * @link_id: the link ID for MLO
+ *
+ * Return: The chandef depending on the mode, or %NULL.
+ */
+struct cfg80211_chan_def *wdev_chandef(struct wireless_dev *wdev,
+ unsigned int link_id);
+
+static inline void WARN_INVALID_LINK_ID(struct wireless_dev *wdev,
+ unsigned int link_id)
+{
+ WARN_ON(link_id && !wdev->valid_links);
+ WARN_ON(wdev->valid_links &&
+ !(wdev->valid_links & BIT(link_id)));
+}
+
+#define for_each_valid_link(link_info, link_id) \
+ for (link_id = 0; \
+ link_id < ((link_info)->valid_links ? \
+ ARRAY_SIZE((link_info)->links) : 1); \
+ link_id++) \
+ if (!(link_info)->valid_links || \
+ ((link_info)->valid_links & BIT(link_id)))
+
+/**
* DOC: Utility functions
*
* cfg80211 offers a number of utility functions that can be useful.
@@ -5943,6 +6083,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
* @addr: the device MAC address
* @iftype: the virtual interface type
* @data_offset: offset of payload after the 802.11 header
+ * @is_amsdu: true if the 802.11 header is A-MSDU
* Return: 0 on success. Non-zero on error.
*/
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
@@ -6812,6 +6953,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
* @macaddr: the MAC address of the new candidate
* @ie: information elements advertised by the peer candidate
* @ie_len: length of the information elements buffer
+ * @sig_dbm: signal level in dBm
* @gfp: allocation flags
*
* This function notifies cfg80211 that the mesh peer candidate has been
@@ -7176,13 +7318,6 @@ struct cfg80211_fils_resp_params {
* indicate that this is a failure, but without a status code.
* @timeout_reason is used to report the reason for the timeout in that
* case.
- * @bssid: The BSSID of the AP (may be %NULL)
- * @bss: Entry of bss to which STA got connected to, can be obtained through
- * cfg80211_get_bss() (may be %NULL). But it is recommended to store the
- * bss from the connect_request and hold a reference to it and return
- * through this param to avoid a warning if the bss is expired during the
- * connection, esp. for those drivers implementing connect op.
- * Only one parameter among @bssid and @bss needs to be specified.
* @req_ie: Association request IEs (may be %NULL)
* @req_ie_len: Association request IEs length
* @resp_ie: Association response IEs (may be %NULL)
@@ -7194,17 +7329,41 @@ struct cfg80211_fils_resp_params {
* not known. This value is used only if @status < 0 to indicate that the
* failure is due to a timeout and not due to explicit rejection by the AP.
* This value is ignored in other cases (@status >= 0).
+ * @valid_links: For MLO connection, BIT mask of the valid link ids. Otherwise
+ * zero.
+ * @ap_mld_addr: For MLO connection, MLD address of the AP. Otherwise %NULL.
+ * @links : For MLO connection, contains link info for the valid links indicated
+ * using @valid_links. For non-MLO connection, links[0] contains the
+ * connected AP info.
+ * @links.addr: For MLO connection, MAC address of the STA link. Otherwise
+ * %NULL.
+ * @links.bssid: For MLO connection, MAC address of the AP link. For non-MLO
+ * connection, links[0].bssid points to the BSSID of the AP (may be %NULL).
+ * @links.bss: For MLO connection, entry of bss to which STA link is connected.
+ * For non-MLO connection, links[0].bss points to entry of bss to which STA
+ * is connected. It can be obtained through cfg80211_get_bss() (may be
+ * %NULL). It is recommended to store the bss from the connect_request and
+ * hold a reference to it and return through this param to avoid a warning
+ * if the bss is expired during the connection, esp. for those drivers
+ * implementing connect op. Only one parameter among @bssid and @bss needs
+ * to be specified.
*/
struct cfg80211_connect_resp_params {
int status;
- const u8 *bssid;
- struct cfg80211_bss *bss;
const u8 *req_ie;
size_t req_ie_len;
const u8 *resp_ie;
size_t resp_ie_len;
struct cfg80211_fils_resp_params fils;
enum nl80211_timeout_reason timeout_reason;
+
+ const u8 *ap_mld_addr;
+ u16 valid_links;
+ struct {
+ const u8 *addr;
+ const u8 *bssid;
+ struct cfg80211_bss *bss;
+ } links[IEEE80211_MLD_MAX_NUM_LINKS];
};
/**
@@ -7274,8 +7433,8 @@ cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
memset(&params, 0, sizeof(params));
params.status = status;
- params.bssid = bssid;
- params.bss = bss;
+ params.links[0].bssid = bssid;
+ params.links[0].bss = bss;
params.req_ie = req_ie;
params.req_ie_len = req_ie_len;
params.resp_ie = resp_ie;
@@ -7346,24 +7505,40 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
/**
* struct cfg80211_roam_info - driver initiated roaming information
*
- * @channel: the channel of the new AP
- * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set)
- * @bssid: the BSSID of the new AP (may be %NULL if %bss is set)
* @req_ie: association request IEs (maybe be %NULL)
* @req_ie_len: association request IEs length
* @resp_ie: association response IEs (may be %NULL)
* @resp_ie_len: assoc response IEs length
* @fils: FILS related roaming information.
+ * @valid_links: For MLO roaming, BIT mask of the new valid links is set.
+ * Otherwise zero.
+ * @ap_mld_addr: For MLO roaming, MLD address of the new AP. Otherwise %NULL.
+ * @links : For MLO roaming, contains new link info for the valid links set in
+ * @valid_links. For non-MLO roaming, links[0] contains the new AP info.
+ * @links.addr: For MLO roaming, MAC address of the STA link. Otherwise %NULL.
+ * @links.bssid: For MLO roaming, MAC address of the new AP link. For non-MLO
+ * roaming, links[0].bssid points to the BSSID of the new AP. May be
+ * %NULL if %links.bss is set.
+ * @links.channel: the channel of the new AP.
+ * @links.bss: For MLO roaming, entry of new bss to which STA link got
+ * roamed. For non-MLO roaming, links[0].bss points to entry of bss to
+ * which STA got roamed (may be %NULL if %links.bssid is set)
*/
struct cfg80211_roam_info {
- struct ieee80211_channel *channel;
- struct cfg80211_bss *bss;
- const u8 *bssid;
const u8 *req_ie;
size_t req_ie_len;
const u8 *resp_ie;
size_t resp_ie_len;
struct cfg80211_fils_resp_params fils;
+
+ const u8 *ap_mld_addr;
+ u16 valid_links;
+ struct {
+ const u8 *addr;
+ const u8 *bssid;
+ struct ieee80211_channel *channel;
+ struct cfg80211_bss *bss;
+ } links[IEEE80211_MLD_MAX_NUM_LINKS];
};
/**
@@ -7882,12 +8057,14 @@ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
* cfg80211_ch_switch_notify - update wdev channel and notify userspace
* @dev: the device which switched channels
* @chandef: the new channel definition
+ * @link_id: the link ID for MLO, must be 0 for non-MLO
*
* Caller must acquire wdev_lock, therefore must only be called from sleepable
* driver context!
*/
void cfg80211_ch_switch_notify(struct net_device *dev,
- struct cfg80211_chan_def *chandef);
+ struct cfg80211_chan_def *chandef,
+ unsigned int link_id);
/*
* cfg80211_ch_switch_started_notify - notify channel switch start
@@ -8462,11 +8639,12 @@ int cfg80211_bss_color_notify(struct net_device *dev, gfp_t gfp,
* cfg80211_obss_color_collision_notify - notify about bss color collision
* @dev: network device
* @color_bitmap: representations of the colors that the local BSS is aware of
+ * @gfp: allocation flags
*/
static inline int cfg80211_obss_color_collision_notify(struct net_device *dev,
- u64 color_bitmap)
+ u64 color_bitmap, gfp_t gfp)
{
- return cfg80211_bss_color_notify(dev, GFP_KERNEL,
+ return cfg80211_bss_color_notify(dev, gfp,
NL80211_CMD_OBSS_COLOR_COLLISION,
0, color_bitmap);
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-10 07:16:18 +0300