summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h313
1 files changed, 225 insertions, 88 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ee50c5eba50c..f7eba1300d82 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -147,10 +147,12 @@ struct ieee80211_low_level_stats {
* enum ieee80211_chanctx_change - change flag for channel context
* @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
+ * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
+ IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
};
/**
@@ -165,6 +167,7 @@ enum ieee80211_chanctx_change {
* @rx_chains_dynamic: The number of RX chains that must be enabled
* after RTS/CTS handshake to receive SMPS MIMO transmissions;
* this will always be >= @rx_chains_static.
+ * @radar_enabled: whether radar detection is enabled on this channel.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
*/
@@ -173,7 +176,9 @@ struct ieee80211_chanctx_conf {
u8 rx_chains_static, rx_chains_dynamic;
- u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+ bool radar_enabled;
+
+ u8 drv_priv[0] __aligned(sizeof(void *));
};
/**
@@ -208,6 +213,11 @@ struct ieee80211_chanctx_conf {
* @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
* @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
* changed (currently only in P2P client mode, GO mode will be later)
+ * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when
+ * it becomes valid, managed mode only)
+ * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
+ * note that this is only called when it changes after the channel
+ * context had been assigned.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -230,6 +240,8 @@ enum ieee80211_bss_change {
BSS_CHANGED_PS = 1<<17,
BSS_CHANGED_TXPOWER = 1<<18,
BSS_CHANGED_P2P_PS = 1<<19,
+ BSS_CHANGED_DTIM_PERIOD = 1<<20,
+ BSS_CHANGED_BANDWIDTH = 1<<21,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -271,13 +283,19 @@ enum ieee80211_rssi_event {
* if the hardware cannot handle this it must set the
* IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
* @dtim_period: num of beacons before the next DTIM, for beaconing,
- * valid in station mode only while @assoc is true and if also
- * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
- * @ps_dtim_period)
+ * valid in station mode only if after the driver was notified
+ * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then.
* @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
- * as it may have been received during scanning long ago)
+ * as it may have been received during scanning long ago). If the
+ * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
+ * only come from a beacon, but might not become valid until after
+ * association when a beacon is received (which is notified with the
+ * %BSS_CHANGED_DTIM flag.)
* @sync_device_ts: the device timestamp corresponding to the sync_tsf,
* the driver/device can use this to calculate synchronisation
+ * (see @sync_tsf)
+ * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY
+ * is requested, see @sync_tsf/@sync_device_ts.
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
* @basic_rates: bitmap of basic rates, each bit stands for an
@@ -297,11 +315,9 @@ enum ieee80211_rssi_event {
* may filter ARP queries targeted for other addresses than listed here.
* The driver must allow ARP queries targeted for all address listed here
* to pass through. An empty list implies no ARP queries need to pass.
- * @arp_addr_cnt: Number of addresses currently on the list.
- * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
- * filter ARP queries based on the @arp_addr_list, if disabled, the
- * hardware must not perform any ARP filtering. Note, that the filter will
- * be enabled also in promiscuous mode.
+ * @arp_addr_cnt: Number of addresses currently on the list. Note that this
+ * may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
+ * array size), it's up to the driver what to do in that case.
* @qos: This is a QoS-enabled BSS.
* @idle: This interface is idle. There's also a global idle flag in the
* hardware config which may be more appropriate depending on what
@@ -331,6 +347,7 @@ struct ieee80211_bss_conf {
u16 assoc_capability;
u64 sync_tsf;
u32 sync_device_ts;
+ u8 sync_dtim_count;
u32 basic_rates;
int mcast_rate[IEEE80211_NUM_BANDS];
u16 ht_operation_mode;
@@ -338,8 +355,7 @@ struct ieee80211_bss_conf {
u32 cqm_rssi_hyst;
struct cfg80211_chan_def chandef;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
- u8 arp_addr_cnt;
- bool arp_filter_enabled;
+ int arp_addr_cnt;
bool qos;
bool idle;
bool ps;
@@ -392,6 +408,9 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
* set by rate control algorithms to indicate probe rate, will
* be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate
+ * that a frame can be transmitted while the queues are stopped for
+ * off-channel operation.
* @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
* used to indicate that a pending frame requires TX processing before
* it can be sent out.
@@ -409,6 +428,9 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
* after TX status because the destination was asleep, it must not
* be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_MLME_CONN_TX: This frame was transmitted by the MLME
+ * code for connection establishment, this indicates that its status
+ * should kick the MLME state machine.
* @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
* MLME command (internal to mac80211 to figure out whether to send TX
* status to user space)
@@ -454,13 +476,14 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STAT_AMPDU = BIT(10),
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13),
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17),
IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
- /* hole at 20, use later */
+ IEEE80211_TX_INTFL_MLME_CONN_TX = BIT(20),
IEEE80211_TX_INTFL_NL80211_FRAME_TX = BIT(21),
IEEE80211_TX_CTL_LDPC = BIT(22),
IEEE80211_TX_CTL_STBC = BIT(23) | BIT(24),
@@ -953,6 +976,7 @@ enum ieee80211_smps_mode {
*
* @channel: the channel to tune to
* @channel_type: the channel (HT) type
+ * @radar_enabled: whether radar detection is enabled
*
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
@@ -979,6 +1003,7 @@ struct ieee80211_conf {
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
+ bool radar_enabled;
enum ieee80211_smps_mode smps_mode;
};
@@ -1059,7 +1084,7 @@ struct ieee80211_vif {
u32 driver_flags;
/* must be last */
- u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+ u8 drv_priv[0] __aligned(sizeof(void *));
};
static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
@@ -1176,6 +1201,24 @@ enum ieee80211_sta_state {
};
/**
+ * enum ieee80211_sta_rx_bandwidth - station RX bandwidth
+ * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz
+ * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz
+ * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz
+ * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
+ * (including 80+80 MHz)
+ *
+ * Implementation note: 20 must be zero to be initialized
+ * correctly, the values must be sorted.
+ */
+enum ieee80211_sta_rx_bandwidth {
+ IEEE80211_STA_RX_BW_20 = 0,
+ IEEE80211_STA_RX_BW_40,
+ IEEE80211_STA_RX_BW_80,
+ IEEE80211_STA_RX_BW_160,
+};
+
+/**
* struct ieee80211_sta - station table entry
*
* A station table entry represents a station we are possibly
@@ -1197,6 +1240,12 @@ enum ieee80211_sta_state {
* @uapsd_queues: bitmap of queues configured for uapsd. Only valid
* if wme is supported.
* @max_sp: max Service Period. Only valid if wme is supported.
+ * @bandwidth: current bandwidth the station can receive with
+ * @rx_nss: in HT/VHT, the maximum number of spatial streams the
+ * station can receive at the moment, changed by operating mode
+ * notifications and capabilities. The value is only valid after
+ * the station moves to associated state.
+ * @smps_mode: current SMPS mode (off, static or dynamic)
*/
struct ieee80211_sta {
u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1207,9 +1256,12 @@ struct ieee80211_sta {
bool wme;
u8 uapsd_queues;
u8 max_sp;
+ u8 rx_nss;
+ enum ieee80211_sta_rx_bandwidth bandwidth;
+ enum ieee80211_smps_mode smps_mode;
/* must be last */
- u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+ u8 drv_priv[0] __aligned(sizeof(void *));
};
/**
@@ -1331,9 +1383,9 @@ struct ieee80211_tx_control {
* When this flag is set, signaling beacon-loss will cause an immediate
* change to disassociated state.
*
- * @IEEE80211_HW_NEED_DTIM_PERIOD:
- * This device needs to know the DTIM period for the BSS before
- * associating.
+ * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
+ * This device needs to get data from beacon before association (i.e.
+ * dtim_period).
*
* @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
* per-station GTKs as used by IBSS RSN or during fast transition. If
@@ -1353,10 +1405,6 @@ struct ieee80211_tx_control {
* setup strictly in HW. mac80211 should not attempt to do this in
* software.
*
- * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while
- * being idle (i.e. mac80211 doesn't have to go idle-off during the
- * the scan).
- *
* @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of
* a virtual monitor interface when monitor interfaces are the only
* active interfaces.
@@ -1370,9 +1418,8 @@ struct ieee80211_tx_control {
* P2P Interface. This will be honoured even if more than one interface
* is supported.
*
- * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
- * should be tear down once BAR frame will not be acked.
- *
+ * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames
+ * only, to allow getting TBTT of a DTIM beacon.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -1382,7 +1429,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
IEEE80211_HW_SIGNAL_DBM = 1<<6,
- IEEE80211_HW_NEED_DTIM_PERIOD = 1<<7,
+ IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC = 1<<7,
IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
IEEE80211_HW_SUPPORTS_PS = 1<<10,
@@ -1399,9 +1446,8 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
- IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24,
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
- IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26,
+ IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
};
/**
@@ -1522,6 +1568,8 @@ struct ieee80211_hw {
* structure can then access it via hw->priv. Note that mac802111 drivers should
* not use wiphy_priv() to try to get their private driver structure as this
* is already used internally by mac80211.
+ *
+ * Return: The mac80211 driver hw struct of @wiphy.
*/
struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
@@ -1628,6 +1676,10 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
* provided by update_tkip_key only. The trigger that makes mac80211 call this
* handler is software decryption with wrap around of iv16.
+ *
+ * The set_default_unicast_key() call updates the default WEP key index
+ * configured to the hardware for WEP encryption type. This is required
+ * for devices that support offload of data packets (e.g. ARP responses).
*/
/**
@@ -1680,15 +1732,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
* enabled whenever user has enabled powersave.
*
- * Some hardware need to toggle a single shared antenna between WLAN and
- * Bluetooth to facilitate co-existence. These types of hardware set
- * limitations on the use of host controlled dynamic powersave whenever there
- * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the
- * driver may request temporarily going into full power save, in order to
- * enable toggling the antenna between BT and WLAN. If the driver requests
- * disabling dynamic powersave, the @dynamic_ps_timeout value will be
- * temporarily set to zero until the driver re-enables dynamic powersave.
- *
* Driver informs U-APSD client support by enabling
* %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
* uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
@@ -2033,17 +2076,29 @@ enum ieee80211_filter_flags {
* calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
* might receive the addBA frame and send a delBA right away!
*
- * @IEEE80211_AMPDU_RX_START: start Rx aggregation
- * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
- * @IEEE80211_AMPDU_TX_START: start Tx aggregation
- * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_RX_START: start RX aggregation
+ * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation
+ * @IEEE80211_AMPDU_TX_START: start TX aggregation
* @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
+ * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting
+ * queued packets, now unaggregated. After all packets are transmitted the
+ * driver has to call ieee80211_stop_tx_ba_cb_irqsafe().
+ * @IEEE80211_AMPDU_TX_STOP_FLUSH: stop TX aggregation and flush all packets,
+ * called when the station is removed. There's no need or reason to call
+ * ieee80211_stop_tx_ba_cb_irqsafe() in this case as mac80211 assumes the
+ * session is gone and removes the station.
+ * @IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: called when TX aggregation is stopped
+ * but the driver hasn't called ieee80211_stop_tx_ba_cb_irqsafe() yet and
+ * now the connection is dropped and the station will be removed. Drivers
+ * should clean up and drop remaining packets when this is called.
*/
enum ieee80211_ampdu_mlme_action {
IEEE80211_AMPDU_RX_START,
IEEE80211_AMPDU_RX_STOP,
IEEE80211_AMPDU_TX_START,
- IEEE80211_AMPDU_TX_STOP,
+ IEEE80211_AMPDU_TX_STOP_CONT,
+ IEEE80211_AMPDU_TX_STOP_FLUSH,
+ IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
IEEE80211_AMPDU_TX_OPERATIONAL,
};
@@ -2062,16 +2117,21 @@ enum ieee80211_frame_release_type {
* enum ieee80211_rate_control_changed - flags to indicate what changed
*
* @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit
- * to this station changed.
+ * to this station changed. The actual bandwidth is in the station
+ * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40
+ * flag changes, for HT and VHT the bandwidth field changes.
* @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed.
* @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer
* changed (in IBSS mode) due to discovering more information about
* the peer.
+ * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed
+ * by the peer
*/
enum ieee80211_rate_control_changed {
IEEE80211_RC_BW_CHANGED = BIT(0),
IEEE80211_RC_SMPS_CHANGED = BIT(1),
IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2),
+ IEEE80211_RC_NSS_CHANGED = BIT(3),
};
/**
@@ -2152,6 +2212,18 @@ enum ieee80211_rate_control_changed {
* MAC address of the device going away.
* Hence, this callback must be implemented. It can sleep.
*
+ * @add_interface_debugfs: Drivers can use this callback to add debugfs files
+ * when a vif is added to mac80211. This callback and
+ * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ * conditional. @remove_interface_debugfs must be provided for cleanup.
+ * This callback can sleep.
+ *
+ * @remove_interface_debugfs: Remove the debugfs files which were added using
+ * @add_interface_debugfs. This callback must remove all debugfs entries
+ * that were added because mac80211 only removes interface debugfs when the
+ * interface is destroyed, not when it is removed from the driver.
+ * This callback can sleep.
+ *
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
@@ -2194,6 +2266,10 @@ enum ieee80211_rate_control_changed {
* After rekeying was done it should (for example during resume) notify
* userspace of the new replay counter using ieee80211_gtk_rekey_notify().
*
+ * @set_default_unicast_key: Set the default (unicast) key index, useful for
+ * WEP when the device sends data packets autonomously, e.g. for ARP
+ * offloading. The index can be 0-3, or -1 for unsetting it.
+ *
* @hw_scan: Ask the hardware to service the scan request, no need to start
* the scan state machine in stack. The scan must honour the channel
* configuration done by the regulatory agent in the wiphy's
@@ -2474,7 +2550,13 @@ enum ieee80211_rate_control_changed {
*
* @restart_complete: Called after a call to ieee80211_restart_hw(), when the
* reconfiguration has completed. This can help the driver implement the
- * reconfiguration step. This callback may sleep.
+ * reconfiguration step. Also called when reconfiguring because the
+ * driver's resume function returned 1, as this is just like an "inline"
+ * hardware restart. This callback may sleep.
+ *
+ * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
+ * Currently, this is only called for managed or P2P client interfaces.
+ * This callback is optional; it must not sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -2522,6 +2604,8 @@ struct ieee80211_ops {
void (*set_rekey_data)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_gtk_rekey_data *data);
+ void (*set_default_unicast_key)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, int idx);
int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
void (*cancel_hw_scan)(struct ieee80211_hw *hw,
@@ -2553,6 +2637,12 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir);
+ void (*add_interface_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct dentry *dir);
+ void (*remove_interface_debugfs)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct dentry *dir);
#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -2606,6 +2696,7 @@ struct ieee80211_ops {
int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const struct cfg80211_bitrate_mask *mask);
void (*rssi_callback)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
enum ieee80211_rssi_event rssi_event);
void (*allow_buffered_frames)(struct ieee80211_hw *hw,
@@ -2648,6 +2739,12 @@ struct ieee80211_ops {
struct ieee80211_chanctx_conf *ctx);
void (*restart_complete)(struct ieee80211_hw *hw);
+
+#if IS_ENABLED(CONFIG_IPV6)
+ void (*ipv6_addr_change)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct inet6_dev *idev);
+#endif
};
/**
@@ -2661,6 +2758,8 @@ struct ieee80211_ops {
*
* @priv_data_len: length of private data
* @ops: callbacks for this device
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
*/
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops);
@@ -2673,6 +2772,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
* need to fill the contained wiphy's information.
*
* @hw: the device to register as returned by ieee80211_alloc_hw()
+ *
+ * Return: 0 on success. An error code otherwise.
*/
int ieee80211_register_hw(struct ieee80211_hw *hw);
@@ -2719,6 +2820,8 @@ extern char *__ieee80211_create_tpt_led_trigger(
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
{
@@ -2738,6 +2841,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
{
@@ -2757,6 +2862,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
{
@@ -2776,6 +2883,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
* of the trigger so you can automatically link the LED device.
*
* @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
{
@@ -2793,9 +2902,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
* @blink_table: the blink table -- needs to be ordered by throughput
* @blink_table_len: size of the blink table
*
- * This function returns %NULL (in case of error, or if no LED
- * triggers are configured) or the name of the new trigger.
- * This function must be called before ieee80211_register_hw().
+ * Return: %NULL (in case of error, or if no LED triggers are
+ * configured) or the name of the new trigger.
+ *
+ * Note: This function must be called before ieee80211_register_hw().
*/
static inline char *
ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
@@ -2928,10 +3038,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
* Calls to this function for a single hardware must be synchronized against
* each other.
*
- * The function returns -EINVAL when the requested PS mode is already set.
- *
* @sta: currently connected sta
* @start: start or stop PS
+ *
+ * Return: 0 on success. -EINVAL when the requested PS mode is already set.
*/
int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
@@ -2945,6 +3055,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
*
* @sta: currently connected sta
* @start: start or stop PS
+ *
+ * Return: Like ieee80211_sta_ps_transition().
*/
static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
bool start)
@@ -3082,6 +3194,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
* according to the current DTIM parameters/TIM bitmap.
*
* The driver is responsible for freeing the returned skb.
+ *
+ * Return: The beacon template. %NULL on error.
*/
struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -3093,6 +3207,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
* See ieee80211_beacon_get_tim().
+ *
+ * Return: See ieee80211_beacon_get_tim().
*/
static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
@@ -3109,6 +3225,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
* hardware. The destination address should be set by the caller.
*
* Can only be called in AP mode.
+ *
+ * Return: The Probe Response template. %NULL on error.
*/
struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
@@ -3124,6 +3242,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
*
* Note: Caller (or hardware) is responsible for setting the
* &IEEE80211_FCTL_PM bit.
+ *
+ * Return: The PS Poll template. %NULL on error.
*/
struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
@@ -3139,6 +3259,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
*
* Note: Caller (or hardware) is responsible for setting the
* &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ *
+ * Return: The nullfunc template. %NULL on error.
*/
struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
@@ -3153,6 +3275,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
*
* Creates a Probe Request template which can, for example, be uploaded to
* hardware.
+ *
+ * Return: The Probe Request template. %NULL on error.
*/
struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -3188,6 +3312,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
* If the RTS is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
*/
__le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, size_t frame_len,
@@ -3223,6 +3349,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
* If the CTS-to-self is generated in firmware, but the host system must provide
* the duration field, the low-level driver uses this function to receive
* the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
*/
__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -3239,6 +3367,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
*
* Calculate the duration field of some generic frame, given its
* length and transmission rate (in 100kbps).
+ *
+ * Return: The duration.
*/
__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -3255,9 +3385,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
* hardware/firmware does not implement buffering of broadcast/multicast
* frames when power saving is used, 802.11 code buffers them in the host
* memory. The low-level driver uses this function to fetch next buffered
- * frame. In most cases, this is used when generating beacon frame. This
- * function returns a pointer to the next buffered skb or NULL if no more
- * buffered frames are available.
+ * frame. In most cases, this is used when generating beacon frame.
+ *
+ * Return: A pointer to the next buffered skb or NULL if no more buffered
+ * frames are available.
*
* Note: buffered frames are returned only after DTIM beacon frame was
* generated with ieee80211_beacon_get() and the low-level driver must thus
@@ -3437,6 +3568,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
* @queue: queue number (counted from zero).
*
* Drivers should use this function instead of netif_stop_queue.
+ *
+ * Return: %true if the queue is stopped. %false otherwise.
*/
int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
@@ -3634,7 +3767,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
* @vif: virtual interface to look for station on
* @addr: station's address
*
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
* resulting pointer is only valid under RCU lock as well.
*/
struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
@@ -3647,7 +3782,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
* @addr: remote station's address
* @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
*
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
* resulting pointer is only valid under RCU lock as well.
*
* NOTE: You may pass NULL for localaddr, but then you will just get
@@ -3754,6 +3891,11 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw,
* The iterator will not find a context that's being added (during
* the driver callback to add it) but will find it while it's being
* removed.
+ *
+ * Note that during hardware restart, all contexts that existed
+ * before the restart are considered already present so will be
+ * found while iterating, whether they've been re-added already
+ * or not.
*/
void ieee80211_iter_chan_contexts_atomic(
struct ieee80211_hw *hw,
@@ -3772,7 +3914,9 @@ void ieee80211_iter_chan_contexts_atomic(
* information. This function must only be called from within the
* .bss_info_changed callback function and only in managed mode. The function
* is only useful when the interface is associated, otherwise it will return
- * NULL.
+ * %NULL.
+ *
+ * Return: The Probe Request template. %NULL on error.
*/
struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
@@ -3796,6 +3940,8 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif);
* When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and
* %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
* needs to inform if the connection to the AP has been lost.
+ * The function may also be called if the connection needs to be terminated
+ * for some other reason, even if %IEEE80211_HW_CONNECTION_MONITOR isn't set.
*
* This function will cause immediate change to disassociated state,
* without connection recovery attempts.
@@ -3826,36 +3972,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif);
void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
/**
- * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * Some hardware require full power save to manage simultaneous BT traffic
- * on the WLAN frequency. Full PSM is required periodically, whenever there are
- * burst of BT traffic. The hardware gets information of BT traffic via
- * hardware co-existence lines, and consequentially requests mac80211 to
- * (temporarily) enter full psm.
- * This function will only temporarily disable dynamic PS, not enable PSM if
- * it was not already enabled.
- * The driver must make sure to re-enable dynamic PS using
- * ieee80211_enable_dyn_ps() if the driver has disabled it.
- *
- */
-void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
- * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * This function restores dynamic PS after being temporarily disabled via
- * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
- * be coupled with an eventual call to this function.
- *
- */
-void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
* ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
* rssi threshold triggered
*
@@ -3872,6 +3988,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
gfp_t gfp);
/**
+ * ieee80211_radar_detected - inform that a radar was detected
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_radar_detected(struct ieee80211_hw *hw);
+
+/**
* ieee80211_chswitch_done - Complete channel switch process
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @success: make the channel switch successful or not
@@ -4119,13 +4242,27 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
/**
- * ieee80211_ave_rssi - report the average rssi for the specified interface
+ * ieee80211_ave_rssi - report the average RSSI for the specified interface
*
* @vif: the specified virtual interface
*
- * This function return the average rssi value for the requested interface.
- * It assumes that the given vif is valid.
+ * Note: This function assumes that the given vif is valid.
+ *
+ * Return: The average RSSI value for the requested interface, or 0 if not
+ * applicable.
*/
int ieee80211_ave_rssi(struct ieee80211_vif *vif);
+/**
+ * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup
+ * @vif: virtual interface
+ * @wakeup: wakeup reason(s)
+ * @gfp: allocation flags
+ *
+ * See cfg80211_report_wowlan_wakeup().
+ */
+void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
+ struct cfg80211_wowlan_wakeup *wakeup,
+ gfp_t gfp);
+
#endif /* MAC80211_H */