diff options
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r-- | include/net/mac80211.h | 154 |
1 files changed, 84 insertions, 70 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8294f44c425a..774cd3e0dcb6 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -230,7 +230,8 @@ enum ieee80211_rssi_event { * valid in station mode only while @assoc is true and if also * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf * @ps_dtim_period) - * @timestamp: beacon timestamp + * @last_tsf: last beacon's/probe response's TSF timestamp (could be old + * as it may have been received during scanning long ago) * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -277,7 +278,7 @@ struct ieee80211_bss_conf { u8 dtim_period; u16 beacon_int; u16 assoc_capability; - u64 timestamp; + u64 last_tsf; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -342,9 +343,9 @@ struct ieee80211_bss_conf { * used to indicate that a frame was already retried due to PS * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, * used to indicate frame should not be encrypted - * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll - * frame (PS-Poll or uAPSD) and should be sent although the station - * is in powersave mode. + * @IEEE80211_TX_CTL_NO_PS_BUFFER: This frame is a response to a poll + * frame (PS-Poll or uAPSD) or a non-bufferable MMPDU and must + * be sent although the station is in powersave mode. * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the * transmit function after the current frame, this can be used * by drivers to kick the DMA queue only if unset or when the @@ -400,7 +401,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), - IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17), + IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), /* hole at 20, use later */ @@ -426,7 +427,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \ IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \ IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \ - IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \ + IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_NO_PS_BUFFER | \ IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \ IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP) @@ -660,6 +661,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used * @RX_FLAG_SHORT_GI: Short guard interval was used + * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present. + * Valid only for data frames (mainly A-MPDU) */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, @@ -673,6 +676,7 @@ enum mac80211_rx_flags { RX_FLAG_HT = 1<<9, RX_FLAG_40MHZ = 1<<10, RX_FLAG_SHORT_GI = 1<<11, + RX_FLAG_NO_SIGNAL_VAL = 1<<12, }; /** @@ -853,6 +857,21 @@ struct ieee80211_channel_switch { }; /** + * enum ieee80211_vif_flags - virtual interface flags + * + * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering + * on this virtual interface to avoid unnecessary CPU wakeups + * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality + * monitoring on this virtual interface -- i.e. it can monitor + * connection quality related parameters, such as the RSSI level and + * provide notifications if configured trigger levels are reached. + */ +enum ieee80211_vif_flags { + IEEE80211_VIF_BEACON_FILTER = BIT(0), + IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1), +}; + +/** * struct ieee80211_vif - per-interface data * * Data in this structure is continually present for driver @@ -864,6 +883,10 @@ struct ieee80211_channel_switch { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively + * @driver_flags: flags/capabilities the driver has for this interface, + * these need to be set (or cleared) when the interface is added + * or, if supported by the driver, the interface type is changed + * at runtime, mac80211 will never touch this field * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -872,6 +895,7 @@ struct ieee80211_vif { struct ieee80211_bss_conf bss_conf; u8 addr[ETH_ALEN]; bool p2p; + u32 driver_flags; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -963,6 +987,25 @@ enum set_key_cmd { }; /** + * enum ieee80211_sta_state - station state + * + * @IEEE80211_STA_NOTEXIST: station doesn't exist at all, + * this is a special state for add/remove transitions + * @IEEE80211_STA_NONE: station exists without special state + * @IEEE80211_STA_AUTH: station is authenticated + * @IEEE80211_STA_ASSOC: station is associated + * @IEEE80211_STA_AUTHORIZED: station is authorized (802.1X) + */ +enum ieee80211_sta_state { + /* NOTE: These need to be ordered correctly! */ + IEEE80211_STA_NOTEXIST, + IEEE80211_STA_NONE, + IEEE80211_STA_AUTH, + IEEE80211_STA_ASSOC, + IEEE80211_STA_AUTHORIZED, +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1080,10 +1123,6 @@ enum sta_notify_cmd { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_BEACON_FILTER: - * Hardware supports dropping of irrelevant beacon frames to - * avoid waking up cpu. - * * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: * Hardware supports static spatial multiplexing powersave, * ie. can turn off all but one chain even on HT connections @@ -1109,11 +1148,6 @@ enum sta_notify_cmd { * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. * - * @IEEE80211_HW_SUPPORTS_CQM_RSSI: - * Hardware can do connection quality monitoring - i.e. it can monitor - * connection quality related parameters, such as the RSSI level and - * provide notifications if configured trigger levels are reached. - * * @IEEE80211_HW_NEED_DTIM_PERIOD: * This device needs to know the DTIM period for the BSS before * associating. @@ -1135,6 +1169,10 @@ enum sta_notify_cmd { * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session * setup strictly in HW. mac80211 should not attempt to do this in * software. + * + * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while + * being idle (i.e. mac80211 doesn't have to go idle-off during the + * the scan). */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1151,16 +1189,17 @@ enum ieee80211_hw_flags { IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, - IEEE80211_HW_BEACON_FILTER = 1<<14, + /* reuse bit 14 */ IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, - IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, + /* reuse bit 20 */ IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, + IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, }; /** @@ -1447,8 +1486,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER - * hardware capability. The driver needs to enable beacon filter support + * Beacon filter support is advertised with the %IEEE80211_VIF_BEACON_FILTER + * interface capability. The driver needs to enable beacon filter support * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When * power save is enabled, the stack will not check for beacon loss and the * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). @@ -1600,7 +1639,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * the station sends a PS-Poll or a uAPSD trigger frame, mac80211 * will inform the driver of this with the @allow_buffered_frames * callback; this callback is optional. mac80211 will then transmit - * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE + * the frames as usual and set the %IEEE80211_TX_CTL_NO_PS_BUFFER * on each frame. The last frame in the service period (or the only * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to * indicate that it ends the service period; as this frame must have @@ -1608,6 +1647,9 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * When TX status is reported for this frame, the service period is * marked has having ended and a new one can be started by the peer. * + * Additionally, non-bufferable MMPDUs can also be transmitted by + * mac80211 with the %IEEE80211_TX_CTL_NO_PS_BUFFER set in them. + * * Another race condition can happen on some devices like iwlwifi * when there are frames queued for the station and it wakes up * or polls; the frames that are already queued could end up being @@ -1726,20 +1768,6 @@ enum ieee80211_ampdu_mlme_action { }; /** - * enum ieee80211_tx_sync_type - TX sync type - * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication - * (and possibly also before direct probe) - * @IEEE80211_TX_SYNC_ASSOC: sync TX for association - * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame - * (not implemented yet) - */ -enum ieee80211_tx_sync_type { - IEEE80211_TX_SYNC_AUTH, - IEEE80211_TX_SYNC_ASSOC, - IEEE80211_TX_SYNC_ACTION, -}; - -/** * enum ieee80211_frame_release_type - frame release reason * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to @@ -1849,26 +1877,6 @@ enum ieee80211_frame_release_type { * of the bss parameters has changed when a call is made. The callback * can sleep. * - * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the - * driver should sync with the GO's powersaving so the device doesn't - * transmit the frame while the GO is asleep. In the regular AP case - * it may be used by drivers for devices implementing other restrictions - * on talking to APs, e.g. due to regulatory enforcement or just HW - * restrictions. - * This function is called for every authentication, association and - * action frame separately since applications might attempt to auth - * with multiple APs before chosing one to associate to. If it returns - * an error, the corresponding authentication, association or frame - * transmission is aborted and reported as having failed. It is always - * called after tuning to the correct channel. - * The callback might be called multiple times before @finish_tx_sync - * (but @finish_tx_sync will be called once for each) but in practice - * this is unlikely to happen. It can also refuse in that case if the - * driver cannot handle that situation. - * This callback can sleep. - * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned - * an error. This callback can sleep. - * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed * to configure_filter(). This callback must be atomic. @@ -1964,6 +1972,13 @@ enum ieee80211_frame_release_type { * in AP mode, this callback will not be called when the flag * %IEEE80211_HW_AP_LINK_PS is set. Must be atomic. * + * @sta_state: Notifies low level driver about state transition of a + * station (which can be the AP, a client, IBSS/WDS/mesh peer etc.) + * This callback is mutually exclusive with @sta_add/@sta_remove. + * It must not fail for down transitions but may fail for transitions + * up the list of states. + * The callback can sleep. + * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. * Returns a negative error code on failure. @@ -2099,7 +2114,7 @@ enum ieee80211_frame_release_type { * @allow_buffered_frames: Prepare device to allow the given number of frames * to go out to the given station. The frames will be sent by mac80211 * via the usual TX path after this call. The TX information for frames - * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set + * released will also have the %IEEE80211_TX_CTL_NO_PS_BUFFER flag set * and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case * frames from multiple TIDs are released and the driver might reorder * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag @@ -2133,13 +2148,6 @@ struct ieee80211_ops { struct ieee80211_bss_conf *info, u32 changed); - int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - const u8 *bssid, enum ieee80211_tx_sync_type type); - void (*finish_tx_sync)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *bssid, - enum ieee80211_tx_sync_type type); - u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, @@ -2183,6 +2191,10 @@ struct ieee80211_ops { struct ieee80211_sta *sta); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); + int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + enum ieee80211_sta_state old_state, + enum ieee80211_sta_state new_state); int (*conf_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params); @@ -3317,7 +3329,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER and * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the * hardware is not receiving beacons with this function. */ @@ -3328,7 +3340,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. * @@ -3398,7 +3410,7 @@ void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); * @rssi_event: the RSSI trigger event type * @gfp: context flags * - * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality + * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality * monitoring is configured with an rssi threshold, the driver will inform * whenever the rssi level reaches the threshold. */ @@ -3517,6 +3529,8 @@ enum rate_control_changed { * @hw: The hardware the algorithm is invoked for. * @sband: The band this frame is being transmitted on. * @bss_conf: the current BSS configuration + * @skb: the skb that will be transmitted, the control information in it needs + * to be filled in * @reported_rate: The rate control algorithm can fill this in to indicate * which rate should be reported to userspace as the current rate and * used for rate calculations in the mesh network. @@ -3524,12 +3538,11 @@ enum rate_control_changed { * RTS threshold * @short_preamble: whether mac80211 will request short-preamble transmission * if the selected rate supports it - * @max_rate_idx: user-requested maximum rate (not MCS for now) + * @max_rate_idx: user-requested maximum (legacy) rate * (deprecated; this will be removed once drivers get updated to use * rate_idx_mask) - * @rate_idx_mask: user-requested rate mask (not MCS for now) - * @skb: the skb that will be transmitted, the control information in it needs - * to be filled in + * @rate_idx_mask: user-requested (legacy) rate mask + * @rate_idx_mcs_mask: user-requested MCS rate mask * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { @@ -3541,6 +3554,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; + u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; bool bss; }; |