diff options
Diffstat (limited to 'include/uapi')
27 files changed, 598 insertions, 233 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 3c42b9f1bada..90706a47f6ff 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1115,6 +1115,7 @@ enum bpf_attach_type { BPF_CGROUP_UNIX_GETSOCKNAME, BPF_NETKIT_PRIMARY, BPF_NETKIT_PEER, + BPF_TRACE_KPROBE_SESSION, __MAX_BPF_ATTACH_TYPE }; @@ -1135,6 +1136,7 @@ enum bpf_link_type { BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, BPF_LINK_TYPE_NETKIT = 13, + BPF_LINK_TYPE_SOCKMAP = 14, __MAX_BPF_LINK_TYPE, }; @@ -1662,8 +1664,10 @@ union bpf_attr { } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ - __u64 name; - __u32 prog_fd; + __u64 name; + __u32 prog_fd; + __u32 :32; + __aligned_u64 cookie; } raw_tracepoint; struct { /* anonymous struct for BPF_BTF_LOAD */ @@ -3392,6 +3396,10 @@ union bpf_attr { * for the nexthop. If the src addr cannot be derived, * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this * case, *params*->dmac and *params*->smac are not set either. + * **BPF_FIB_LOOKUP_MARK** + * Use the mark present in *params*->mark for the fib lookup. + * This option should not be used with BPF_FIB_LOOKUP_DIRECT, + * as it only has meaning for full lookups. * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -5020,7 +5028,7 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if + * **-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if * invalid arguments are passed. * * struct socket *bpf_sock_from_file(struct file *file) @@ -5506,7 +5514,7 @@ union bpf_attr { * bytes will be copied to *dst* * Return * The **hash_algo** is returned on success, - * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * **-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if * invalid arguments are passed. * * void *bpf_kptr_xchg(void *map_value, void *ptr) @@ -6718,6 +6726,10 @@ struct bpf_link_info { __u32 ifindex; __u32 attach_type; } netkit; + struct { + __u32 map_id; + __u32 attach_type; + } sockmap; }; } __attribute__((aligned(8))); @@ -6936,6 +6948,8 @@ enum { * socket transition to LISTEN state. */ BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + * Arg1: measured RTT input (mrtt) + * Arg2: updated srtt */ BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. * It will be called to handle @@ -7118,6 +7132,7 @@ enum { BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), BPF_FIB_LOOKUP_TBID = (1U << 3), BPF_FIB_LOOKUP_SRC = (1U << 4), + BPF_FIB_LOOKUP_MARK = (1U << 5), }; enum { @@ -7150,7 +7165,7 @@ struct bpf_fib_lookup { /* output: MTU value */ __u16 mtu_result; - }; + } __attribute__((packed, aligned(2))); /* input: L3 device index for lookup * output: device index from FIB lookup */ @@ -7195,8 +7210,19 @@ struct bpf_fib_lookup { __u32 tbid; }; - __u8 smac[6]; /* ETH_ALEN */ - __u8 dmac[6]; /* ETH_ALEN */ + union { + /* input */ + struct { + __u32 mark; /* policy routing */ + /* 2 4-byte holes for input */ + }; + + /* output: source and dest mac */ + struct { + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ + }; + }; }; struct bpf_redir_neigh { @@ -7283,6 +7309,10 @@ struct bpf_timer { __u64 __opaque[2]; } __attribute__((aligned(8))); +struct bpf_wq { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + struct bpf_dynptr { __u64 __opaque[2]; } __attribute__((aligned(8))); diff --git a/include/uapi/linux/cryptouser.h b/include/uapi/linux/cryptouser.h index 5730c67f0617..20a6c0fc149e 100644 --- a/include/uapi/linux/cryptouser.h +++ b/include/uapi/linux/cryptouser.h @@ -32,7 +32,7 @@ enum { CRYPTO_MSG_UPDATEALG, CRYPTO_MSG_GETALG, CRYPTO_MSG_DELRNG, - CRYPTO_MSG_GETSTAT, + CRYPTO_MSG_GETSTAT, /* No longer supported, do not use. */ __CRYPTO_MSG_MAX }; #define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1) @@ -54,16 +54,16 @@ enum crypto_attr_type_t { CRYPTOCFGA_REPORT_AKCIPHER, /* struct crypto_report_akcipher */ CRYPTOCFGA_REPORT_KPP, /* struct crypto_report_kpp */ CRYPTOCFGA_REPORT_ACOMP, /* struct crypto_report_acomp */ - CRYPTOCFGA_STAT_LARVAL, /* struct crypto_stat */ - CRYPTOCFGA_STAT_HASH, /* struct crypto_stat */ - CRYPTOCFGA_STAT_BLKCIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_AEAD, /* struct crypto_stat */ - CRYPTOCFGA_STAT_COMPRESS, /* struct crypto_stat */ - CRYPTOCFGA_STAT_RNG, /* struct crypto_stat */ - CRYPTOCFGA_STAT_CIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_AKCIPHER, /* struct crypto_stat */ - CRYPTOCFGA_STAT_KPP, /* struct crypto_stat */ - CRYPTOCFGA_STAT_ACOMP, /* struct crypto_stat */ + CRYPTOCFGA_STAT_LARVAL, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_HASH, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_BLKCIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_AEAD, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_COMPRESS, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_RNG, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_CIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_AKCIPHER, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_KPP, /* No longer supported, do not use. */ + CRYPTOCFGA_STAT_ACOMP, /* No longer supported, do not use. */ __CRYPTOCFGA_MAX #define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1) @@ -79,6 +79,7 @@ struct crypto_user_alg { __u32 cru_flags; }; +/* No longer supported, do not use. */ struct crypto_stat_aead { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -88,6 +89,7 @@ struct crypto_stat_aead { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_akcipher { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -99,6 +101,7 @@ struct crypto_stat_akcipher { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_cipher { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; @@ -108,6 +111,7 @@ struct crypto_stat_cipher { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_compress { char type[CRYPTO_MAX_NAME]; __u64 stat_compress_cnt; @@ -117,6 +121,7 @@ struct crypto_stat_compress { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_hash { char type[CRYPTO_MAX_NAME]; __u64 stat_hash_cnt; @@ -124,6 +129,7 @@ struct crypto_stat_hash { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_kpp { char type[CRYPTO_MAX_NAME]; __u64 stat_setsecret_cnt; @@ -132,6 +138,7 @@ struct crypto_stat_kpp { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_rng { char type[CRYPTO_MAX_NAME]; __u64 stat_generate_cnt; @@ -140,6 +147,7 @@ struct crypto_stat_rng { __u64 stat_err_cnt; }; +/* No longer supported, do not use. */ struct crypto_stat_larval { char type[CRYPTO_MAX_NAME]; }; diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 2da0c7eb6710..9401aa343673 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -686,6 +686,7 @@ enum devlink_port_function_attr { DEVLINK_PORT_FN_ATTR_OPSTATE, /* u8 */ DEVLINK_PORT_FN_ATTR_CAPS, /* bitfield32 */ DEVLINK_PORT_FN_ATTR_DEVLINK, /* nested */ + DEVLINK_PORT_FN_ATTR_MAX_IO_EQS, /* u32 */ __DEVLINK_PORT_FUNCTION_ATTR_MAX, DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1 diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 11fc18988bc2..8733a3117902 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -753,6 +753,61 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_pse_types - Types of PSE controller. + * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown + * @ETHTOOL_PSE_PODL: PSE controller which support PoDL + * @ETHTOOL_PSE_C33: PSE controller which support Clause 33 (PoE) + */ +enum ethtool_pse_types { + ETHTOOL_PSE_UNKNOWN = 1 << 0, + ETHTOOL_PSE_PODL = 1 << 1, + ETHTOOL_PSE_C33 = 1 << 2, +}; + +/** + * enum ethtool_c33_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState + * @ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN: state of PSE functions is unknown + * @ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED: PSE functions are disabled + * @ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED: PSE functions are enabled + */ +enum ethtool_c33_pse_admin_state { + ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_c33_pse_pw_d_status - power detection status of the PSE. + * IEEE 802.3-2022 30.9.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN: PSE status is unknown + * @ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED: The enumeration "disabled" + * indicates that the PSE State diagram is in the state DISABLED. + * @ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING: The enumeration "searching" + * indicates the PSE State diagram is in a state other than those + * listed. + * @ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING: The enumeration + * "deliveringPower" indicates that the PSE State diagram is in the + * state POWER_ON. + * @ETHTOOL_C33_PSE_PW_D_STATUS_TEST: The enumeration "test" indicates that + * the PSE State diagram is in the state TEST_MODE. + * @ETHTOOL_C33_PSE_PW_D_STATUS_FAULT: The enumeration "fault" indicates that + * the PSE State diagram is in the state TEST_ERROR. + * @ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT: The enumeration "otherFault" + * indicates that the PSE State diagram is in the state IDLE due to + * the variable error_condition = true. + */ +enum ethtool_c33_pse_pw_d_status { + ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_C33_PSE_PW_D_STATUS_TEST, + ETHTOOL_C33_PSE_PW_D_STATUS_FAULT, + ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT, +}; + +/** * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 3f89074aa06c..b49b804b9495 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -117,12 +117,11 @@ enum { /* request header */ -/* use compact bitsets in reply */ -#define ETHTOOL_FLAG_COMPACT_BITSETS (1 << 0) -/* provide optional reply for SET or ACT requests */ -#define ETHTOOL_FLAG_OMIT_REPLY (1 << 1) -/* request statistics, if supported by the driver */ -#define ETHTOOL_FLAG_STATS (1 << 2) +enum ethtool_header_flags { + ETHTOOL_FLAG_COMPACT_BITSETS = 1 << 0, /* use compact bitsets in reply */ + ETHTOOL_FLAG_OMIT_REPLY = 1 << 1, /* provide optional reply for SET or ACT requests */ + ETHTOOL_FLAG_STATS = 1 << 2, /* request statistics, if supported by the driver */ +}; #define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \ ETHTOOL_FLAG_OMIT_REPLY | \ @@ -478,12 +477,26 @@ enum { ETHTOOL_A_TSINFO_TX_TYPES, /* bitset */ ETHTOOL_A_TSINFO_RX_FILTERS, /* bitset */ ETHTOOL_A_TSINFO_PHC_INDEX, /* u32 */ + ETHTOOL_A_TSINFO_STATS, /* nest - _A_TSINFO_STAT */ /* add new constants above here */ __ETHTOOL_A_TSINFO_CNT, ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1) }; +enum { + ETHTOOL_A_TS_STAT_UNSPEC, + + ETHTOOL_A_TS_STAT_TX_PKTS, /* uint */ + ETHTOOL_A_TS_STAT_TX_LOST, /* uint */ + ETHTOOL_A_TS_STAT_TX_ERR, /* uint */ + + /* add new constants above here */ + __ETHTOOL_A_TS_STAT_CNT, + ETHTOOL_A_TS_STAT_MAX = (__ETHTOOL_A_TS_STAT_CNT - 1) + +}; + /* PHC VCLOCKS */ enum { @@ -515,6 +528,10 @@ enum { ETHTOOL_A_CABLE_RESULT_CODE_OPEN, ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT, ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT, + /* detected reflection caused by the impedance discontinuity between + * a regular 100 Ohm cable and a part with the abnormal impedance value + */ + ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH, }; enum { @@ -895,6 +912,9 @@ enum { ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ ETHTOOL_A_PODL_PSE_ADMIN_CONTROL, /* u32 */ ETHTOOL_A_PODL_PSE_PW_D_STATUS, /* u32 */ + ETHTOOL_A_C33_PSE_ADMIN_STATE, /* u32 */ + ETHTOOL_A_C33_PSE_ADMIN_CONTROL, /* u32 */ + ETHTOOL_A_C33_PSE_PW_D_STATUS, /* u32 */ /* add new constants above here */ __ETHTOOL_A_PSE_CNT, diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 282e90aeb163..c0bcc185fa48 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -9,6 +9,14 @@ #define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) /* + * Request nofications on a directory. + * See below for events that may be notified. + */ +#define F_NOTIFY (F_LINUX_SPECIFIC_BASE + 2) + +#define F_DUPFD_QUERY (F_LINUX_SPECIFIC_BASE + 3) + +/* * Cancel a blocking posix lock; internal use only until we expose an * asynchronous lock api to userspace: */ @@ -18,12 +26,6 @@ #define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) /* - * Request nofications on a directory. - * See below for events that may be notified. - */ -#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) - -/* * Set and get of pipe page size array */ #define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h index 3dcdb9e33cba..40f5388d6de0 100644 --- a/include/uapi/linux/gtp.h +++ b/include/uapi/linux/gtp.h @@ -31,6 +31,9 @@ enum gtp_attrs { GTPA_I_TEI, /* for GTPv1 only */ GTPA_O_TEI, /* for GTPv1 only */ GTPA_PAD, + GTPA_PEER_ADDR6, + GTPA_MS_ADDR6, + GTPA_FAMILY, __GTPA_MAX, }; #define GTPA_MAX (__GTPA_MAX - 1) diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index ecaece3af38d..4eaab89e2856 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -112,6 +112,7 @@ struct icmp6hdr { #define ICMPV6_MOBILE_PREFIX_ADV 147 #define ICMPV6_MRDISC_ADV 151 +#define ICMPV6_MRDISC_SOL 152 #define ICMPV6_MSG_MAX 255 diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index ffa637b38c93..6dc258993b17 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -1466,6 +1466,8 @@ enum { IFLA_GTP_ROLE, IFLA_GTP_CREATE_SOCKETS, IFLA_GTP_RESTART_COUNT, + IFLA_GTP_LOCAL, + IFLA_GTP_LOCAL6, __IFLA_GTP_MAX, }; #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) @@ -1771,6 +1773,7 @@ enum { IFLA_HSR_PROTOCOL, /* Indicate different protocol than * HSR. For example PRP. */ + IFLA_HSR_INTERLINK, /* HSR interlink network device */ __IFLA_HSR_MAX, }; diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h index 13c61fecb78b..a5c06243a435 100644 --- a/include/uapi/linux/if_team.h +++ b/include/uapi/linux/if_team.h @@ -1,108 +1,78 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * include/linux/if_team.h - Network team device driver header - * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/team.yaml */ +/* YNL-GEN uapi header */ -#ifndef _UAPI_LINUX_IF_TEAM_H_ -#define _UAPI_LINUX_IF_TEAM_H_ +#ifndef _UAPI_LINUX_IF_TEAM_H +#define _UAPI_LINUX_IF_TEAM_H +#define TEAM_GENL_NAME "team" +#define TEAM_GENL_VERSION 1 -#define TEAM_STRING_MAX_LEN 32 - -/********************************** - * NETLINK_GENERIC netlink family. - **********************************/ - -enum { - TEAM_CMD_NOOP, - TEAM_CMD_OPTIONS_SET, - TEAM_CMD_OPTIONS_GET, - TEAM_CMD_PORT_LIST_GET, - - __TEAM_CMD_MAX, - TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), -}; +#define TEAM_STRING_MAX_LEN 32 +#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" enum { TEAM_ATTR_UNSPEC, - TEAM_ATTR_TEAM_IFINDEX, /* u32 */ - TEAM_ATTR_LIST_OPTION, /* nest */ - TEAM_ATTR_LIST_PORT, /* nest */ + TEAM_ATTR_TEAM_IFINDEX, + TEAM_ATTR_LIST_OPTION, + TEAM_ATTR_LIST_PORT, __TEAM_ATTR_MAX, - TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, + TEAM_ATTR_MAX = (__TEAM_ATTR_MAX - 1) }; -/* Nested layout of get/set msg: - * - * [TEAM_ATTR_LIST_OPTION] - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * ... - * [TEAM_ATTR_LIST_PORT] - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * ... - */ - enum { TEAM_ATTR_ITEM_OPTION_UNSPEC, - TEAM_ATTR_ITEM_OPTION, /* nest */ + TEAM_ATTR_ITEM_OPTION, __TEAM_ATTR_ITEM_OPTION_MAX, - TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, + TEAM_ATTR_ITEM_OPTION_MAX = (__TEAM_ATTR_ITEM_OPTION_MAX - 1) }; enum { TEAM_ATTR_OPTION_UNSPEC, - TEAM_ATTR_OPTION_NAME, /* string */ - TEAM_ATTR_OPTION_CHANGED, /* flag */ - TEAM_ATTR_OPTION_TYPE, /* u8 */ - TEAM_ATTR_OPTION_DATA, /* dynamic */ - TEAM_ATTR_OPTION_REMOVED, /* flag */ - TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ - TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ + TEAM_ATTR_OPTION_NAME, + TEAM_ATTR_OPTION_CHANGED, + TEAM_ATTR_OPTION_TYPE, + TEAM_ATTR_OPTION_DATA, + TEAM_ATTR_OPTION_REMOVED, + TEAM_ATTR_OPTION_PORT_IFINDEX, + TEAM_ATTR_OPTION_ARRAY_INDEX, __TEAM_ATTR_OPTION_MAX, - TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, + TEAM_ATTR_OPTION_MAX = (__TEAM_ATTR_OPTION_MAX - 1) }; enum { TEAM_ATTR_ITEM_PORT_UNSPEC, - TEAM_ATTR_ITEM_PORT, /* nest */ + TEAM_ATTR_ITEM_PORT, __TEAM_ATTR_ITEM_PORT_MAX, - TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, + TEAM_ATTR_ITEM_PORT_MAX = (__TEAM_ATTR_ITEM_PORT_MAX - 1) }; enum { TEAM_ATTR_PORT_UNSPEC, - TEAM_ATTR_PORT_IFINDEX, /* u32 */ - TEAM_ATTR_PORT_CHANGED, /* flag */ - TEAM_ATTR_PORT_LINKUP, /* flag */ - TEAM_ATTR_PORT_SPEED, /* u32 */ - TEAM_ATTR_PORT_DUPLEX, /* u8 */ - TEAM_ATTR_PORT_REMOVED, /* flag */ + TEAM_ATTR_PORT_IFINDEX, + TEAM_ATTR_PORT_CHANGED, + TEAM_ATTR_PORT_LINKUP, + TEAM_ATTR_PORT_SPEED, + TEAM_ATTR_PORT_DUPLEX, + TEAM_ATTR_PORT_REMOVED, __TEAM_ATTR_PORT_MAX, - TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, + TEAM_ATTR_PORT_MAX = (__TEAM_ATTR_PORT_MAX - 1) }; -/* - * NETLINK_GENERIC related info - */ -#define TEAM_GENL_NAME "team" -#define TEAM_GENL_VERSION 0x1 -#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" +enum { + TEAM_CMD_NOOP, + TEAM_CMD_OPTIONS_SET, + TEAM_CMD_OPTIONS_GET, + TEAM_CMD_PORT_LIST_GET, + + __TEAM_CMD_MAX, + TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1) +}; -#endif /* _UAPI_LINUX_IF_TEAM_H_ */ +#endif /* _UAPI_LINUX_IF_TEAM_H */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 102119628ff5..e1a246dd8c62 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -161,6 +161,14 @@ enum { #define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) +#ifndef __KERNEL__ +/* Historically, tunnel flags have been defined as __be16 and now there are + * no free bits left. It is strongly advised to switch the already existing + * userspace code to the new *_BIT definitions from down below, as __be16 + * can't be simply cast to a wider type on LE systems. All new flags and + * code must use *_BIT only. + */ + #define TUNNEL_CSUM __cpu_to_be16(0x01) #define TUNNEL_ROUTING __cpu_to_be16(0x02) #define TUNNEL_KEY __cpu_to_be16(0x04) @@ -181,5 +189,33 @@ enum { #define TUNNEL_OPTIONS_PRESENT \ (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \ TUNNEL_GTP_OPT) +#endif + +enum { + IP_TUNNEL_CSUM_BIT = 0U, + IP_TUNNEL_ROUTING_BIT, + IP_TUNNEL_KEY_BIT, + IP_TUNNEL_SEQ_BIT, + IP_TUNNEL_STRICT_BIT, + IP_TUNNEL_REC_BIT, + IP_TUNNEL_VERSION_BIT, + IP_TUNNEL_NO_KEY_BIT, + IP_TUNNEL_DONT_FRAGMENT_BIT, + IP_TUNNEL_OAM_BIT, + IP_TUNNEL_CRIT_OPT_BIT, + IP_TUNNEL_GENEVE_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_VXLAN_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_NOCACHE_BIT, + IP_TUNNEL_ERSPAN_OPT_BIT, /* OPTIONS_PRESENT */ + IP_TUNNEL_GTP_OPT_BIT, /* OPTIONS_PRESENT */ + + IP_TUNNEL_VTI_BIT, + IP_TUNNEL_SIT_ISATAP_BIT = IP_TUNNEL_VTI_BIT, + + /* Flags starting from here are not available via the old UAPI */ + IP_TUNNEL_PFCP_OPT_BIT, /* OPTIONS_PRESENT */ + + __IP_TUNNEL_FLAG_NUM, +}; #endif /* _UAPI_IF_TUNNEL_H_ */ diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 7bd10201a02b..994bf7af0efe 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -72,6 +72,7 @@ struct io_uring_sqe { __u32 waitid_flags; __u32 futex_flags; __u32 install_fd_flags; + __u32 nop_flags; }; __u64 user_data; /* data to be passed back at completion time */ /* pack this to avoid bogus arm OABI complaints */ @@ -115,7 +116,7 @@ struct io_uring_sqe { */ #define IORING_FILE_INDEX_ALLOC (~0U) -enum { +enum io_uring_sqe_flags_bit { IOSQE_FIXED_FILE_BIT, IOSQE_IO_DRAIN_BIT, IOSQE_IO_LINK_BIT, @@ -351,11 +352,20 @@ enum io_uring_op { * 0 is reported if zerocopy was actually possible. * IORING_NOTIF_USAGE_ZC_COPIED if data was copied * (at least partially). + * + * IORING_RECVSEND_BUNDLE Used with IOSQE_BUFFER_SELECT. If set, send or + * recv will grab as many buffers from the buffer + * group ID given and send them all. The completion + * result will be the number of buffers send, with + * the starting buffer ID in cqe->flags as per + * usual for provided buffer usage. The buffers + * will be contigious from the starting buffer ID. */ #define IORING_RECVSEND_POLL_FIRST (1U << 0) #define IORING_RECV_MULTISHOT (1U << 1) #define IORING_RECVSEND_FIXED_BUF (1U << 2) #define IORING_SEND_ZC_REPORT_USAGE (1U << 3) +#define IORING_RECVSEND_BUNDLE (1U << 4) /* * cqe.res for IORING_CQE_F_NOTIF if @@ -370,11 +380,13 @@ enum io_uring_op { * accept flags stored in sqe->ioprio */ #define IORING_ACCEPT_MULTISHOT (1U << 0) +#define IORING_ACCEPT_DONTWAIT (1U << 1) +#define IORING_ACCEPT_POLL_FIRST (1U << 2) /* * IORING_OP_MSG_RING command types, stored in sqe->addr */ -enum { +enum io_uring_msg_ring_flags { IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ IORING_MSG_SEND_FD, /* send a registered fd to another ring */ }; @@ -397,6 +409,13 @@ enum { #define IORING_FIXED_FD_NO_CLOEXEC (1U << 0) /* + * IORING_OP_NOP flags (sqe->nop_flags) + * + * IORING_NOP_INJECT_RESULT Inject result from sqe->result + */ +#define IORING_NOP_INJECT_RESULT (1U << 0) + +/* * IO completion data structure (Completion Queue Entry) */ struct io_uring_cqe { @@ -425,9 +444,7 @@ struct io_uring_cqe { #define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) #define IORING_CQE_F_NOTIF (1U << 3) -enum { - IORING_CQE_BUFFER_SHIFT = 16, -}; +#define IORING_CQE_BUFFER_SHIFT 16 /* * Magic offsets for the application to mmap the data it needs @@ -522,11 +539,12 @@ struct io_uring_params { #define IORING_FEAT_CQE_SKIP (1U << 11) #define IORING_FEAT_LINKED_FILE (1U << 12) #define IORING_FEAT_REG_REG_RING (1U << 13) +#define IORING_FEAT_RECVSEND_BUNDLE (1U << 14) /* * io_uring_register(2) opcodes and arguments */ -enum { +enum io_uring_register_op { IORING_REGISTER_BUFFERS = 0, IORING_UNREGISTER_BUFFERS = 1, IORING_REGISTER_FILES = 2, @@ -583,7 +601,7 @@ enum { }; /* io-wq worker categories */ -enum { +enum io_wq_type { IO_WQ_BOUND, IO_WQ_UNBOUND, }; @@ -688,7 +706,7 @@ struct io_uring_buf_ring { * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) * to get a virtual mapping for the ring. */ -enum { +enum io_uring_register_pbuf_ring_flags { IOU_PBUF_RING_MMAP = 1, }; @@ -719,7 +737,7 @@ struct io_uring_napi { /* * io_uring_restriction->opcode values */ -enum { +enum io_uring_register_restriction_op { /* Allow an io_uring_register(2) opcode */ IORING_RESTRICTION_REGISTER_OP = 0, @@ -775,7 +793,7 @@ struct io_uring_recvmsg_out { /* * Argument for IORING_OP_URING_CMD when file is a socket */ -enum { +enum io_uring_socket_op { SOCKET_URING_OP_SIOCINQ = 0, SOCKET_URING_OP_SIOCOUTQ, SOCKET_URING_OP_GETSOCKOPT, diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index 74cfe496891e..67d015df8893 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -58,6 +58,10 @@ struct mptcp_info { __u64 mptcpi_bytes_received; __u64 mptcpi_bytes_acked; __u8 mptcpi_subflows_total; + __u8 reserved[3]; + __u32 mptcpi_last_data_sent; + __u32 mptcpi_last_data_recv; + __u32 mptcpi_last_ack_recv; }; /* MPTCP Reset reason codes, rfc8684 */ diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h index bb65ee840cda..a8188202413e 100644 --- a/include/uapi/linux/netdev.h +++ b/include/uapi/linux/netdev.h @@ -146,6 +146,27 @@ enum { NETDEV_A_QSTATS_TX_PACKETS, NETDEV_A_QSTATS_TX_BYTES, NETDEV_A_QSTATS_RX_ALLOC_FAIL, + NETDEV_A_QSTATS_RX_HW_DROPS, + NETDEV_A_QSTATS_RX_HW_DROP_OVERRUNS, + NETDEV_A_QSTATS_RX_CSUM_UNNECESSARY, + NETDEV_A_QSTATS_RX_CSUM_NONE, + NETDEV_A_QSTATS_RX_CSUM_BAD, + NETDEV_A_QSTATS_RX_HW_GRO_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_BYTES, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_BYTES, + NETDEV_A_QSTATS_RX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_HW_DROPS, + NETDEV_A_QSTATS_TX_HW_DROP_ERRORS, + NETDEV_A_QSTATS_TX_CSUM_NONE, + NETDEV_A_QSTATS_TX_NEEDS_CSUM, + NETDEV_A_QSTATS_TX_HW_GSO_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_BYTES, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_BYTES, + NETDEV_A_QSTATS_TX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_STOP, + NETDEV_A_QSTATS_TX_WAKE, __NETDEV_A_QSTATS_MAX, NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f23ecbdd84a2..f917bc6c9b6f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -413,8 +413,8 @@ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. @@ -442,20 +442,15 @@ * stations connected and using at least that link as one of its links. * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by * %NL80211_ATTR_MAC. - * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all mesh paths, on the interface identified - * by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by * %NL80211_ATTR_IFINDEX. * @@ -476,15 +471,15 @@ * after being queried by the kernel. CRDA replies by sending a regulatory * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our * current alpha2 if it found a match. It also provides - * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each - * regulatory rule is a nested set of attributes given by - * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and - * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by - * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and - * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - * to the specified ISO/IEC 3166-1 alpha2 country code. The core will - * store this as a valid request and then query userspace for it. + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. * * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX @@ -574,31 +569,31 @@ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain - * has been changed and provides details of the request information - * that caused the change such as who initiated the regulatory request - * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx - * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if - * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or - * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain - * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is - * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on - * to (%NL80211_ATTR_REG_ALPHA2). + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon - * has been found while world roaming thus enabling active scan or - * any mode of operation that initiates TX (beacons) on a channel - * where we would not have been able to do either before. As an example - * if you are world roaming (regulatory domain set to world or if your - * driver is using a custom world roaming regulatory domain) and while - * doing a passive scan on the 5 GHz band you find an AP there (if not - * on a DFS channel) you will now be able to actively scan for that AP - * or use AP mode on your card on that same channel. Note that this will - * never be used for channels 1-11 on the 2 GHz band as they are always - * enabled world wide. This beacon hint is only sent if your device had - * either disabled active scanning or beaconing on a channel. We send to - * userspace the wiphy on which we removed a restriction from - * (%NL80211_ATTR_WIPHY) and the channel on which this occurred - * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) - * the beacon hint was processed. + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. * * @NL80211_CMD_AUTHENTICATE: authentication request and notification. * This command is used both as a command (request to authenticate) and @@ -1120,7 +1115,7 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). - * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. * @@ -1715,21 +1710,21 @@ enum nl80211_commands { * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path - * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at * &enum nl80211_mpath_info. * * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the - * current regulatory domain should be set to or is already set to. - * For example, 'CR', for Costa Rica. This attribute is used by the kernel - * to query the CRDA to retrieve one regulatory domain. This attribute can - * also be used by userspace to query the kernel for the currently set - * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11 country information element to identify a country. - * Users can also simply ask the wireless core to set regulatory domain - * to a specific alpha2. + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11 country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory * rules. * @@ -1772,9 +1767,9 @@ enum nl80211_commands { * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain - * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently - * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) * * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies * an array of command numbers (i.e. a mapping index to command number) @@ -1793,15 +1788,15 @@ enum nl80211_commands { * a u32 * * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _before_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _after_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* * * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported * cipher suites @@ -1862,12 +1857,6 @@ enum nl80211_commands { * that protected APs should be used. This is also used with NEW_BEACON to * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON - * to indicate which unicast key ciphers will be used with the connection - * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which group key cipher will be used with the connection (a - * u32). * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). @@ -1898,6 +1887,7 @@ enum nl80211_commands { * with %NL80211_KEY_* sub-attributes * * @NL80211_ATTR_PID: Process ID of a network namespace. + * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace. * * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for * dumps. This number increases whenever the object list being @@ -1952,6 +1942,7 @@ enum nl80211_commands { * * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. + * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32) * * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. * @@ -2149,6 +2140,9 @@ enum nl80211_commands { * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable * this feature during association. This is a flag attribute. * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the * ATTR_HT_CAPABILITY to which attention should be paid. * Currently, only mac80211 NICs support this feature. @@ -2158,6 +2152,12 @@ enum nl80211_commands { * All values are treated as suggestions and may be ignored * by the driver as required. The actual values may be seen in * the station debugfs ht_caps file. + * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the + * ATTR_VHT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs vht_caps file. * * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country * abides to when initiating radiation on DFS channels. A country maps @@ -2416,7 +2416,7 @@ enum nl80211_commands { * scheduled scan is started. Or the delay before a WoWLAN * net-detect scan is started, counting from the moment the * system is suspended. This value is a u32, in seconds. - + * * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * is operating in an indoor environment. * @@ -3565,7 +3565,7 @@ enum nl80211_sta_flags { * enum nl80211_sta_p2p_ps_status - station support of P2P PS * * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism - * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism * @NUM_NL80211_P2P_PS_STATUS: number of values */ enum nl80211_sta_p2p_ps_status { @@ -3603,9 +3603,9 @@ enum nl80211_he_gi { /** * enum nl80211_he_ltf - HE long training field - * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec - * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec - * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec */ enum nl80211_he_ltf { NL80211_RATE_INFO_HE_1XLTF, @@ -3720,7 +3720,7 @@ enum nl80211_eht_ru_alloc { * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier * (u8, see &enum nl80211_he_gi) * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) - * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) @@ -3823,7 +3823,7 @@ enum nl80211_sta_bss_param { * (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info + * containing info as possible, see &enum nl80211_rate_info * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) * (u32, from this station) * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) @@ -3852,8 +3852,8 @@ enum nl80211_sta_bss_param { * Contains a nested array of signal strength attributes (u8, dBm) * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. - * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the - * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also + * the 802.11 header (u32, kbps) * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons * (u64) * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) @@ -4039,7 +4039,7 @@ enum nl80211_mpath_flags { * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in - * &enum nl80211_mpath_flags; + * &enum nl80211_mpath_flags; * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination @@ -4179,7 +4179,7 @@ enum nl80211_band_attr { * @NL80211_WMMR_CW_MAX: Maximum contention window slot. * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. - * @nl80211_WMMR_MAX: highest possible wmm rule. + * @NL80211_WMMR_MAX: highest possible wmm rule. * @__NL80211_WMMR_LAST: Internal use. */ enum nl80211_wmm_rule { @@ -4201,8 +4201,9 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current * regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation - * are permitted on this channel, this includes sending probe - * requests, or modes of operation that require beaconing. + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. + * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm @@ -4357,16 +4358,16 @@ enum nl80211_bitrate_attr { }; /** - * enum nl80211_initiator - Indicates the initiator of a reg domain request + * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the - * regulatory domain. + * regulatory domain. * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the - * wireless core it thinks its knows the regulatory domain we should be in. + * wireless core it thinks its knows the regulatory domain we should be in. * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an - * 802.11 country information element with regulatory information it - * thinks we should consider. cfg80211 only processes the country + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country * code from the IE, and relies on the regulatory domain information * structure passed by userspace (CRDA) from our wireless-regdb. * If a channel is enabled but the country code indicates it should @@ -4385,11 +4386,11 @@ enum nl80211_reg_initiator { * to a specific country. When this is set you can count on the * ISO / IEC 3166 alpha2 country code being valid. * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory - * domain. + * domain. * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom - * driver specific world regulatory domain. These do not apply system-wide - * and are only applicable to the individual devices which have requested - * them to be applied. + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product * of an intersection between two regulatory domains -- the previously * set regulatory domain on the system and the last accepted regulatory @@ -4406,21 +4407,21 @@ enum nl80211_reg_type { * enum nl80211_reg_rule_attr - regulatory rule attributes * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional - * considerations for a given frequency range. These are the - * &enum nl80211_reg_rule_flags. + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory - * rule in KHz. This is not a center of frequency but an actual regulatory - * band edge. + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this * frequency range, in KHz. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). + * a given frequency range. The value is in mBm (100 * dBm). * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. * If not present or 0 default CAC time will be used. * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm). @@ -4507,8 +4508,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, - * this includes probe requests or modes of operation that require - * beaconing. + * this includes probe requests or modes of operation that require + * beaconing. + * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. @@ -4522,9 +4524,9 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_EHT: EHT operation not allowed * @NL80211_RRF_PSD: Ruleset has power spectral density value * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for - peer-to-peer or adhoc communication under the control of a DFS master - which operates on the same channel (FCC-594280 D01 Section B.3). - Should be used together with %NL80211_RRF_DFS only. + * peer-to-peer or adhoc communication under the control of a DFS master + * which operates on the same channel (FCC-594280 D01 Section B.3). + * Should be used together with %NL80211_RRF_DFS only. * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed */ @@ -4707,8 +4709,8 @@ enum nl80211_mntr_flags { * alternate between Active and Doze states, but may not wake up * for neighbor's beacons. * - * @__NL80211_MESH_POWER_AFTER_LAST - internal use - * @NL80211_MESH_POWER_MAX - highest possible power save level + * @__NL80211_MESH_POWER_AFTER_LAST: internal use + * @NL80211_MESH_POWER_MAX: highest possible power save level */ enum nl80211_mesh_power_mode { @@ -5728,7 +5730,7 @@ struct nl80211_pattern_support { * "TCP connection wakeup" for more details. This is a nested attribute * containing the exact information for establishing and keeping alive * the TCP connection. - * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the * wakeup packet was received on the TCP connection * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the * TCP connection was lost or failed to be established @@ -6077,7 +6079,7 @@ enum nl80211_plink_state { * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer * @NUM_NL80211_PLINK_ACTIONS: number of possible actions */ -enum plink_actions { +enum nl80211_plink_action { NL80211_PLINK_ACTION_NO_ACTION, NL80211_PLINK_ACTION_OPEN, NL80211_PLINK_ACTION_BLOCK, @@ -6404,6 +6406,7 @@ enum nl80211_feature_flags { * receiving control port frames over nl80211 instead of the netdevice. * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate * TXQs. * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the @@ -6787,6 +6790,8 @@ enum nl80211_acl_policy { * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and * turn on other antennas after CTS/RTS). + * @__NL80211_SMPS_AFTER_LAST: internal + * @NL80211_SMPS_MAX: highest used enumeration */ enum nl80211_smps_mode { NL80211_SMPS_OFF, @@ -7008,6 +7013,8 @@ enum nl80211_bss_select_attr { * @NL80211_NAN_FUNC_PUBLISH: function is publish * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use + * @NL80211_NAN_FUNC_MAX_TYPE: internal use */ enum nl80211_nan_function_type { NL80211_NAN_FUNC_PUBLISH, @@ -7168,7 +7175,7 @@ enum nl80211_nan_match_attributes { }; /** - * nl80211_external_auth_action - Action to perform with external + * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. @@ -7186,7 +7193,7 @@ enum nl80211_external_auth_action { * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), * i.e. starting with the measurement token - * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), * i.e. starting with the measurement token * @__NL80211_FTM_RESP_ATTR_LAST: Internal @@ -7829,6 +7836,7 @@ enum nl80211_sae_pwe_mechanism { * * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit * + * @NUM_NL80211_SAR_TYPE: internal */ enum nl80211_sar_type { NL80211_SAR_TYPE_POWER, @@ -7842,6 +7850,8 @@ enum nl80211_sar_type { /** * enum nl80211_sar_attrs - Attributes for SAR spec * + * @__NL80211_SAR_ATTR_INVALID: Invalid + * * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. * * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power @@ -7873,6 +7883,8 @@ enum nl80211_sar_attrs { /** * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs * + * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid + * * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual * power limit value in units of 0.25 dBm if type is * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index ea277039f89d..229fc925ec3a 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -587,6 +587,10 @@ enum { * TCA_FLOWER_KEY_ENC_OPT_GTP_ * attributes */ + TCA_FLOWER_KEY_ENC_OPTS_PFCP, /* Nested + * TCA_FLOWER_KEY_ENC_IPT_PFCP + * attributes + */ __TCA_FLOWER_KEY_ENC_OPTS_MAX, }; @@ -637,6 +641,16 @@ enum { (__TCA_FLOWER_KEY_ENC_OPT_GTP_MAX - 1) enum { + TCA_FLOWER_KEY_ENC_OPT_PFCP_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_PFCP_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_PFCP_SEID, /* be64 */ + __TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_PFCP_MAX - 1) + +enum { TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC, TCA_FLOWER_KEY_MPLS_OPTS_LSE, __TCA_FLOWER_KEY_MPLS_OPTS_MAX, diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index a0819c6a5988..adf5fd78dd50 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -337,6 +337,8 @@ enum LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ LINUX_MIB_XFRMOUTSTATEINVALID, /* XfrmOutStateInvalid */ LINUX_MIB_XFRMACQUIREERROR, /* XfrmAcquireError */ + LINUX_MIB_XFRMOUTSTATEDIRERROR, /* XfrmOutStateDirError */ + LINUX_MIB_XFRMINSTATEDIRERROR, /* XfrmInStateDirError */ __LINUX_MIB_XFRMMAX }; diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h index 2f2ee82d5517..67626d535316 100644 --- a/include/uapi/linux/stat.h +++ b/include/uapi/linux/stat.h @@ -126,8 +126,9 @@ struct statx { __u64 stx_mnt_id; __u32 stx_dio_mem_align; /* Memory buffer alignment for direct I/O */ __u32 stx_dio_offset_align; /* File offset alignment for direct I/O */ + __u64 stx_subvol; /* Subvolume identifier */ /* 0xa0 */ - __u64 __spare3[12]; /* Spare space for future expansion */ + __u64 __spare3[11]; /* Spare space for future expansion */ /* 0x100 */ }; @@ -155,6 +156,7 @@ struct statx { #define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ #define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */ #define STATX_MNT_ID_UNIQUE 0x00004000U /* Want/got extended stx_mount_id */ +#define STATX_SUBVOL 0x00008000U /* Want/got stx_subvol */ #define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h index 2ec6f35cda32..58154117d9b0 100644 --- a/include/uapi/linux/stddef.h +++ b/include/uapi/linux/stddef.h @@ -55,4 +55,12 @@ #define __counted_by(m) #endif +#ifndef __counted_by_le +#define __counted_by_le(m) +#endif + +#ifndef __counted_by_be +#define __counted_by_be(m) +#endif + #endif /* _UAPI_LINUX_STDDEF_H */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index c07e9f90c084..dbf896f3146c 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -135,6 +135,8 @@ enum { #define TCP_AO_GET_KEYS 41 /* List MKT(s) */ #define TCP_AO_REPAIR 42 /* Get/Set SNEs and ISNs */ +#define TCP_IS_MPTCP 43 /* Is MPTCP being used? */ + #define TCP_REPAIR_ON 1 #define TCP_REPAIR_OFF 0 #define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 23e57164693c..d0430bee8292 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -56,6 +56,7 @@ */ #define TEE_IMPL_ID_OPTEE 1 #define TEE_IMPL_ID_AMDTEE 2 +#define TEE_IMPL_ID_TSTEE 3 /* * OP-TEE specific capabilities diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h index 4828794efcf8..1a0fe8b151fb 100644 --- a/include/uapi/linux/udp.h +++ b/include/uapi/linux/udp.h @@ -36,7 +36,7 @@ struct udphdr { #define UDP_GRO 104 /* This socket can receive UDP GRO packets */ /* UDP encapsulation types */ -#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ +#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* unused draft-ietf-ipsec-nat-t-ike-00/01 */ #define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ #define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ #define UDP_ENCAP_GTP0 4 /* GSM TS 09.60 */ diff --git a/include/uapi/linux/virtio_bt.h b/include/uapi/linux/virtio_bt.h index af798f4c9680..3cc7d633456b 100644 --- a/include/uapi/linux/virtio_bt.h +++ b/include/uapi/linux/virtio_bt.h @@ -13,7 +13,6 @@ enum virtio_bt_config_type { VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, - VIRTIO_BT_CONFIG_TYPE_AMP = 1, }; enum virtio_bt_config_vendor { diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index cc65ef0f3c3e..ac9174717ef1 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -56,6 +56,7 @@ #define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ +#define VIRTIO_NET_F_DEVICE_STATS 50 /* Device can provide device-level statistics. */ #define VIRTIO_NET_F_VQ_NOTF_COAL 52 /* Device supports virtqueue notification coalescing */ #define VIRTIO_NET_F_NOTF_COAL 53 /* Device supports notifications coalescing */ #define VIRTIO_NET_F_GUEST_USO4 54 /* Guest can handle USOv4 in. */ @@ -406,4 +407,146 @@ struct virtio_net_ctrl_coal_vq { struct virtio_net_ctrl_coal coal; }; +/* + * Device Statistics + */ +#define VIRTIO_NET_CTRL_STATS 8 +#define VIRTIO_NET_CTRL_STATS_QUERY 0 +#define VIRTIO_NET_CTRL_STATS_GET 1 + +struct virtio_net_stats_capabilities { + +#define VIRTIO_NET_STATS_TYPE_CVQ (1ULL << 32) + +#define VIRTIO_NET_STATS_TYPE_RX_BASIC (1ULL << 0) +#define VIRTIO_NET_STATS_TYPE_RX_CSUM (1ULL << 1) +#define VIRTIO_NET_STATS_TYPE_RX_GSO (1ULL << 2) +#define VIRTIO_NET_STATS_TYPE_RX_SPEED (1ULL << 3) + +#define VIRTIO_NET_STATS_TYPE_TX_BASIC (1ULL << 16) +#define VIRTIO_NET_STATS_TYPE_TX_CSUM (1ULL << 17) +#define VIRTIO_NET_STATS_TYPE_TX_GSO (1ULL << 18) +#define VIRTIO_NET_STATS_TYPE_TX_SPEED (1ULL << 19) + + __le64 supported_stats_types[1]; +}; + +struct virtio_net_ctrl_queue_stats { + struct { + __le16 vq_index; + __le16 reserved[3]; + __le64 types_bitmap[1]; + } stats[1]; +}; + +struct virtio_net_stats_reply_hdr { +#define VIRTIO_NET_STATS_TYPE_REPLY_CVQ 32 + +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_BASIC 0 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_CSUM 1 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_GSO 2 +#define VIRTIO_NET_STATS_TYPE_REPLY_RX_SPEED 3 + +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_BASIC 16 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_CSUM 17 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_GSO 18 +#define VIRTIO_NET_STATS_TYPE_REPLY_TX_SPEED 19 + __u8 type; + __u8 reserved; + __le16 vq_index; + __le16 reserved1; + __le16 size; +}; + +struct virtio_net_stats_cvq { + struct virtio_net_stats_reply_hdr hdr; + + __le64 command_num; + __le64 ok_num; +}; + +struct virtio_net_stats_rx_basic { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_notifications; + + __le64 rx_packets; + __le64 rx_bytes; + + __le64 rx_interrupts; + + __le64 rx_drops; + __le64 rx_drop_overruns; +}; + +struct virtio_net_stats_tx_basic { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_notifications; + + __le64 tx_packets; + __le64 tx_bytes; + + __le64 tx_interrupts; + + __le64 tx_drops; + __le64 tx_drop_malformed; +}; + +struct virtio_net_stats_rx_csum { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_csum_valid; + __le64 rx_needs_csum; + __le64 rx_csum_none; + __le64 rx_csum_bad; +}; + +struct virtio_net_stats_tx_csum { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_csum_none; + __le64 tx_needs_csum; +}; + +struct virtio_net_stats_rx_gso { + struct virtio_net_stats_reply_hdr hdr; + + __le64 rx_gso_packets; + __le64 rx_gso_bytes; + __le64 rx_gso_packets_coalesced; + __le64 rx_gso_bytes_coalesced; +}; + +struct virtio_net_stats_tx_gso { + struct virtio_net_stats_reply_hdr hdr; + + __le64 tx_gso_packets; + __le64 tx_gso_bytes; + __le64 tx_gso_segments; + __le64 tx_gso_segments_bytes; + __le64 tx_gso_packets_noseg; + __le64 tx_gso_bytes_noseg; +}; + +struct virtio_net_stats_rx_speed { + struct virtio_net_stats_reply_hdr hdr; + + /* rx_{packets,bytes}_allowance_exceeded are too long. So rename to + * short name. + */ + __le64 rx_ratelimit_packets; + __le64 rx_ratelimit_bytes; +}; + +struct virtio_net_stats_tx_speed { + struct virtio_net_stats_reply_hdr hdr; + + /* tx_{packets,bytes}_allowance_exceeded are too long. So rename to + * short name. + */ + __le64 tx_ratelimit_packets; + __le64 tx_ratelimit_bytes; +}; + #endif /* _UAPI_LINUX_VIRTIO_NET_H */ diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 6a77328be114..d950d02ab791 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -141,6 +141,11 @@ enum { XFRM_POLICY_MAX = 3 }; +enum xfrm_sa_dir { + XFRM_SA_DIR_IN = 1, + XFRM_SA_DIR_OUT = 2 +}; + enum { XFRM_SHARE_ANY, /* No limitations */ XFRM_SHARE_SESSION, /* For this session only */ @@ -228,7 +233,7 @@ enum { #define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE) /* - * Generic LSM security context for comunicating to user space + * Generic LSM security context for communicating to user space * NOTE: Same format as sadb_x_sec_ctx */ struct xfrm_user_sec_ctx { @@ -315,6 +320,7 @@ enum xfrm_attr_type_t { XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */ + XFRMA_SA_DIR, /* __u8 */ __XFRMA_MAX #define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */ diff --git a/include/uapi/scsi/scsi_bsg_mpi3mr.h b/include/uapi/scsi/scsi_bsg_mpi3mr.h index 30a5c1a59376..a3ba779a3f78 100644 --- a/include/uapi/scsi/scsi_bsg_mpi3mr.h +++ b/include/uapi/scsi/scsi_bsg_mpi3mr.h @@ -401,7 +401,7 @@ struct mpi3mr_buf_entry { __u32 buf_len; }; /** - * struct mpi3mr_bsg_buf_entry_list - list of user buffer + * struct mpi3mr_buf_entry_list - list of user buffer * descriptor for MPI Passthrough requests. * * @num_of_entries: Number of buffer descriptors @@ -424,6 +424,7 @@ struct mpi3mr_buf_entry_list { * @mrioc_id: Controller ID * @rsvd1: Reserved * @timeout: MPI request timeout + * @rsvd2: Reserved * @buf_entry_list: Buffer descriptor list */ struct mpi3mr_bsg_mptcmd { @@ -441,8 +442,9 @@ struct mpi3mr_bsg_mptcmd { * @cmd_type: represents drvrcmd or mptcmd * @rsvd1: Reserved * @rsvd2: Reserved - * @drvrcmd: driver request structure - * @mptcmd: mpt request structure + * @rsvd3: Reserved + * @cmd.drvrcmd: driver request structure + * @cmd.mptcmd: mpt request structure */ struct mpi3mr_bsg_packet { __u8 cmd_type; diff --git a/include/uapi/scsi/scsi_bsg_ufs.h b/include/uapi/scsi/scsi_bsg_ufs.h index 03f2beadf201..8c29e498ef98 100644 --- a/include/uapi/scsi/scsi_bsg_ufs.h +++ b/include/uapi/scsi/scsi_bsg_ufs.h @@ -123,6 +123,7 @@ struct utp_upiu_query { * @idn: a value that indicates the particular type of data B-1 * @index: Index to further identify data B-2 * @selector: Index to further identify data B-3 + * @osf3: spec field B-4 * @osf4: spec field B-5 * @osf5: spec field B 6,7 * @osf6: spec field DW 8,9 @@ -138,12 +139,13 @@ struct utp_upiu_query_v4_0 { __be16 osf5; __be32 osf6; __be32 osf7; + /* private: */ __be32 reserved; }; /** * struct utp_upiu_cmd - Command UPIU structure - * @data_transfer_len: Data Transfer Length DW-3 + * @exp_data_transfer_len: Data Transfer Length DW-3 * @cdb: Command Descriptor Block CDB DW-4 to DW-7 */ struct utp_upiu_cmd { |