diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/drm/drm_connector.h | 644 | ||||
-rw-r--r-- | include/drm/drm_crtc.h | 601 | ||||
-rw-r--r-- | include/drm/drm_modes.h | 16 | ||||
-rw-r--r-- | include/drm/drm_modeset.h | 36 |
4 files changed, 674 insertions, 623 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h new file mode 100644 index 000000000000..ec2bea0b1b38 --- /dev/null +++ b/include/drm/drm_connector.h @@ -0,0 +1,644 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_CONNECTOR_H__ +#define __DRM_CONNECTOR_H__ + +#include <linux/list.h> +#include <linux/ctype.h> +#include <drm/drm_modeset.h> + +struct drm_connector_helper_funcs; +struct drm_device; +struct drm_crtc; +struct drm_encoder; +struct drm_property; +struct drm_property_blob; +struct edid; + +enum drm_connector_force { + DRM_FORCE_UNSPECIFIED, + DRM_FORCE_OFF, + DRM_FORCE_ON, /* force on analog part normally */ + DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ +}; + +enum drm_connector_status { + connector_status_connected = 1, + connector_status_disconnected = 2, + connector_status_unknown = 3, +}; + +enum subpixel_order { + SubPixelUnknown = 0, + SubPixelHorizontalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalRGB, + SubPixelVerticalBGR, + SubPixelNone, +}; + +/* + * Describes a given display (e.g. CRT or flat panel) and its limitations. + */ +struct drm_display_info { + char name[DRM_DISPLAY_INFO_LEN]; + + /* Physical size */ + unsigned int width_mm; + unsigned int height_mm; + + /* Clock limits FIXME: storage format */ + unsigned int min_vfreq, max_vfreq; + unsigned int min_hfreq, max_hfreq; + unsigned int pixel_clock; + unsigned int bpc; + + enum subpixel_order subpixel_order; + +#define DRM_COLOR_FORMAT_RGB444 (1<<0) +#define DRM_COLOR_FORMAT_YCRCB444 (1<<1) +#define DRM_COLOR_FORMAT_YCRCB422 (1<<2) + + u32 color_formats; + + const u32 *bus_formats; + unsigned int num_bus_formats; + +#define DRM_BUS_FLAG_DE_LOW (1<<0) +#define DRM_BUS_FLAG_DE_HIGH (1<<1) +/* drive data on pos. edge */ +#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2) +/* drive data on neg. edge */ +#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3) + + u32 bus_flags; + + /* Mask of supported hdmi deep color modes */ + u8 edid_hdmi_dc_modes; + + u8 cea_rev; +}; + +/** + * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector + * @crtc: CRTC to connect connector to, NULL if disabled + * @best_encoder: can be used by helpers and drivers to select the encoder + * @state: backpointer to global drm_atomic_state + */ +struct drm_connector_state { + struct drm_connector *connector; + + struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ + + struct drm_encoder *best_encoder; + + struct drm_atomic_state *state; +}; + +/** + * struct drm_connector_funcs - control connectors on a given device + * + * Each CRTC may have one or more connectors attached to it. The functions + * below allow the core DRM code to control connectors, enumerate available modes, + * etc. + */ +struct drm_connector_funcs { + /** + * @dpms: + * + * Legacy entry point to set the per-connector DPMS state. Legacy DPMS + * is exposed as a standard property on the connector, but diverted to + * this callback in the drm core. Note that atomic drivers don't + * implement the 4 level DPMS support on the connector any more, but + * instead only have an on/off "ACTIVE" property on the CRTC object. + * + * Drivers implementing atomic modeset should use + * drm_atomic_helper_connector_dpms() to implement this hook. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*dpms)(struct drm_connector *connector, int mode); + + /** + * @reset: + * + * Reset connector hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + * + * Atomic drivers can use drm_atomic_helper_connector_reset() to reset + * atomic state using this hook. + */ + void (*reset)(struct drm_connector *connector); + + /** + * @detect: + * + * Check to see if anything is attached to the connector. The parameter + * force is set to false whilst polling, true when checking the + * connector due to a user request. force can be used by the driver to + * avoid expensive, destructive operations during automated probing. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + * + * RETURNS: + * + * drm_connector_status indicating the connector's status. + */ + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + /** + * @force: + * + * This function is called to update internal encoder state when the + * connector is forced to a certain state by userspace, either through + * the sysfs interfaces or on the kernel cmdline. In that case the + * @detect callback isn't called. + * + * FIXME: + * + * Note that this hook is only called by the probe helper. It's not in + * the helper library vtable purely for historical reasons. The only DRM + * core entry point to probe connector state is @fill_modes. + */ + void (*force)(struct drm_connector *connector); + + /** + * @fill_modes: + * + * Entry point for output detection and basic mode validation. The + * driver should reprobe the output if needed (e.g. when hotplug + * handling is unreliable), add all detected modes to connector->modes + * and filter out any the device can't support in any configuration. It + * also needs to filter out any modes wider or higher than the + * parameters max_width and max_height indicate. + * + * The drivers must also prune any modes no longer valid from + * connector->modes. Furthermore it must update connector->status and + * connector->edid. If no EDID has been received for this output + * connector->edid must be NULL. + * + * Drivers using the probe helpers should use + * drm_helper_probe_single_connector_modes() or + * drm_helper_probe_single_connector_modes_nomerge() to implement this + * function. + * + * RETURNS: + * + * The number of modes detected and filled into connector->modes. + */ + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); + + /** + * @set_property: + * + * This is the legacy entry point to update a property attached to the + * connector. + * + * Drivers implementing atomic modeset should use + * drm_atomic_helper_connector_set_property() to implement this hook. + * + * This callback is optional if the driver does not support any legacy + * driver-private properties. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_property)(struct drm_connector *connector, struct drm_property *property, + uint64_t val); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the connector, light backlight control, i2c, + * DP aux or similar interfaces. It is called late in the driver load + * sequence from drm_connector_register() when registering all the + * core drm connector interfaces. Everything added from this callback + * should be unregistered in the early_unregister callback. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_connector *connector); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the connector from + * late_unregister(). It is called from drm_connector_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + */ + void (*early_unregister)(struct drm_connector *connector); + + /** + * @destroy: + * + * Clean up connector resources. This is called at driver unload time + * through drm_mode_config_cleanup(). It can also be called at runtime + * when a connector is being hot-unplugged for drivers that support + * connector hotplugging (e.g. DisplayPort MST). + */ + void (*destroy)(struct drm_connector *connector); + + /** + * @atomic_duplicate_state: + * + * Duplicate the current atomic state for this connector and return it. + * The core and helpers gurantee that any atomic state duplicated with + * this hook and still owned by the caller (i.e. not transferred to the + * driver by calling ->atomic_commit() from struct + * &drm_mode_config_funcs) will be cleaned up by calling the + * @atomic_destroy_state hook in this structure. + * + * Atomic drivers which don't subclass struct &drm_connector_state should use + * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the + * state structure to extend it with driver-private state should use + * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is + * duplicated in a consistent fashion across drivers. + * + * It is an error to call this hook before connector->state has been + * initialized correctly. + * + * NOTE: + * + * If the duplicate state references refcounted resources this hook must + * acquire a reference for each of them. The driver must release these + * references again in @atomic_destroy_state. + * + * RETURNS: + * + * Duplicated atomic state or NULL when the allocation failed. + */ + struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); + + /** + * @atomic_destroy_state: + * + * Destroy a state duplicated with @atomic_duplicate_state and release + * or unreference all resources it references + */ + void (*atomic_destroy_state)(struct drm_connector *connector, + struct drm_connector_state *state); + + /** + * @atomic_set_property: + * + * Decode a driver-private property value and store the decoded value + * into the passed-in state structure. Since the atomic core decodes all + * standardized properties (even for extensions beyond the core set of + * properties which might not be implemented by all drivers) this + * requires drivers to subclass the state structure. + * + * Such driver-private properties should really only be implemented for + * truly hardware/vendor specific state. Instead it is preferred to + * standardize atomic extension and decode the properties used to expose + * such an extension in the core. + * + * Do not call this function directly, use + * drm_atomic_connector_set_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * NOTE: + * + * This function is called in the state assembly phase of atomic + * modesets, which can be aborted for any reason (including on + * userspace's request to just check whether a configuration would be + * possible). Drivers MUST NOT touch any persistent state (hardware or + * software) or data structures except the passed in @state parameter. + * + * Also since userspace controls in which order properties are set this + * function must not do any input validation (since the state update is + * incomplete and hence likely inconsistent). Instead any such input + * validation must be done in the various atomic_check callbacks. + * + * RETURNS: + * + * 0 if the property has been found, -EINVAL if the property isn't + * implemented by the driver (which shouldn't ever happen, the core only + * asks for properties attached to this connector). No other validation + * is allowed by the driver. The core already checks that the property + * value is within the range (integer, valid enum value, ...) the driver + * set when registering the property. + */ + int (*atomic_set_property)(struct drm_connector *connector, + struct drm_connector_state *state, + struct drm_property *property, + uint64_t val); + + /** + * @atomic_get_property: + * + * Reads out the decoded driver-private property. This is used to + * implement the GETCONNECTOR IOCTL. + * + * Do not call this function directly, use + * drm_atomic_connector_get_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * RETURNS: + * + * 0 on success, -EINVAL if the property isn't implemented by the + * driver (which shouldn't ever happen, the core only asks for + * properties attached to this connector). + */ + int (*atomic_get_property)(struct drm_connector *connector, + const struct drm_connector_state *state, + struct drm_property *property, + uint64_t *val); +}; + +/* mode specified on the command line */ +struct drm_cmdline_mode { + bool specified; + bool refresh_specified; + bool bpp_specified; + int xres, yres; + int bpp; + int refresh; + bool rb; + bool interlace; + bool cvt; + bool margins; + enum drm_connector_force force; +}; + +/** + * struct drm_connector - central DRM connector control structure + * @dev: parent DRM device + * @kdev: kernel device for sysfs attributes + * @attr: sysfs attributes + * @head: list management + * @base: base KMS object + * @name: human readable name, can be overwritten by the driver + * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + * @connector_type_id: index into connector type enum + * @interlace_allowed: can this connector handle interlaced modes? + * @doublescan_allowed: can this connector handle doublescan? + * @stereo_allowed: can this connector handle stereo modes? + * @registered: is this connector exposed (registered) with userspace? + * @modes: modes available on this connector (from fill_modes() + user) + * @status: one of the drm_connector_status enums (connected, not, or unknown) + * @probed_modes: list of modes derived directly from the display + * @display_info: information about attached display (e.g. from EDID) + * @funcs: connector control functions + * @edid_blob_ptr: DRM property containing EDID if present + * @properties: property tracking for this connector + * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling + * @dpms: current dpms state + * @helper_private: mid-layer private data + * @cmdline_mode: mode line parsed from the kernel cmdline for this connector + * @force: a DRM_FORCE_<foo> state for forced mode sets + * @override_edid: has the EDID been overwritten through debugfs for testing? + * @encoder_ids: valid encoders for this connector + * @encoder: encoder driving this connector, if any + * @eld: EDID-like data, if present + * @dvi_dual: dual link DVI, if found + * @max_tmds_clock: max clock rate, if found + * @latency_present: AV delay info from ELD, if found + * @video_latency: video latency info from ELD, if found + * @audio_latency: audio latency info from ELD, if found + * @null_edid_counter: track sinks that give us all zeros for the EDID + * @bad_edid_counter: track sinks that give us an EDID with invalid checksum + * @edid_corrupt: indicates whether the last read EDID was corrupt + * @debugfs_entry: debugfs directory for this connector + * @state: current atomic state for this connector + * @has_tile: is this connector connected to a tiled monitor + * @tile_group: tile group for the connected monitor + * @tile_is_single_monitor: whether the tile is one monitor housing + * @num_h_tile: number of horizontal tiles in the tile group + * @num_v_tile: number of vertical tiles in the tile group + * @tile_h_loc: horizontal location of this tile + * @tile_v_loc: vertical location of this tile + * @tile_h_size: horizontal size of this tile. + * @tile_v_size: vertical size of this tile. + * + * Each connector may be connected to one or more CRTCs, or may be clonable by + * another connector if they can share a CRTC. Each connector also has a specific + * position in the broader display (referred to as a 'screen' though it could + * span multiple monitors). + */ +struct drm_connector { + struct drm_device *dev; + struct device *kdev; + struct device_attribute *attr; + struct list_head head; + + struct drm_mode_object base; + + char *name; + + /** + * @index: Compacted connector index, which matches the position inside + * the mode_config.list for drivers not supporting hot-add/removing. Can + * be used as an array index. It is invariant over the lifetime of the + * connector. + */ + unsigned index; + + int connector_type; + int connector_type_id; + bool interlace_allowed; + bool doublescan_allowed; + bool stereo_allowed; + bool registered; + struct list_head modes; /* list of modes on this connector */ + + enum drm_connector_status status; + + /* these are modes added by probing with DDC or the BIOS */ + struct list_head probed_modes; + + struct drm_display_info display_info; + const struct drm_connector_funcs *funcs; + + struct drm_property_blob *edid_blob_ptr; + struct drm_object_properties properties; + + /** + * @path_blob_ptr: + * + * DRM blob property data for the DP MST path property. + */ + struct drm_property_blob *path_blob_ptr; + + /** + * @tile_blob_ptr: + * + * DRM blob property data for the tile property (used mostly by DP MST). + * This is meant for screens which are driven through separate display + * pipelines represented by &drm_crtc, which might not be running with + * genlocked clocks. For tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose + * the tiling and virtualize both &drm_crtc and &drm_plane if needed. + */ + struct drm_property_blob *tile_blob_ptr; + +/* should we poll this connector for connects and disconnects */ +/* hot plug detectable */ +#define DRM_CONNECTOR_POLL_HPD (1 << 0) +/* poll for connections */ +#define DRM_CONNECTOR_POLL_CONNECT (1 << 1) +/* can cleanly poll for disconnections without flickering the screen */ +/* DACs should rarely do this without a lot of testing */ +#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) + + uint8_t polled; /* DRM_CONNECTOR_POLL_* */ + + /* requested DPMS state */ + int dpms; + + const struct drm_connector_helper_funcs *helper_private; + + /* forced on connector */ + struct drm_cmdline_mode cmdline_mode; + enum drm_connector_force force; + bool override_edid; + +#define DRM_CONNECTOR_MAX_ENCODER 3 + uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; + struct drm_encoder *encoder; /* currently active encoder */ + +#define MAX_ELD_BYTES 128 + /* EDID bits */ + uint8_t eld[MAX_ELD_BYTES]; + bool dvi_dual; + int max_tmds_clock; /* in MHz */ + bool latency_present[2]; + int video_latency[2]; /* [0]: progressive, [1]: interlaced */ + int audio_latency[2]; + int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ + unsigned bad_edid_counter; + + /* Flag for raw EDID header corruption - used in Displayport + * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 + */ + bool edid_corrupt; + + struct dentry *debugfs_entry; + + struct drm_connector_state *state; + + /* DisplayID bits */ + bool has_tile; + struct drm_tile_group *tile_group; + bool tile_is_single_monitor; + + uint8_t num_h_tile, num_v_tile; + uint8_t tile_h_loc, tile_v_loc; + uint16_t tile_h_size, tile_v_size; +}; + +#define obj_to_connector(x) container_of(x, struct drm_connector, base) + +int drm_connector_init(struct drm_device *dev, + struct drm_connector *connector, + const struct drm_connector_funcs *funcs, + int connector_type); +int drm_connector_register(struct drm_connector *connector); +void drm_connector_unregister(struct drm_connector *connector); +int drm_mode_connector_attach_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); + +void drm_connector_cleanup(struct drm_connector *connector); +static inline unsigned drm_connector_index(struct drm_connector *connector) +{ + return connector->index; +} + +/** + * drm_connector_lookup - lookup connector object + * @dev: DRM device + * @id: connector object id + * + * This function looks up the connector object specified by id + * add takes a reference to it. + */ +static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, + uint32_t id) +{ + struct drm_mode_object *mo; + mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR); + return mo ? obj_to_connector(mo) : NULL; +} + +/** + * drm_connector_reference - incr the connector refcnt + * @connector: connector + * + * This function increments the connector's refcount. + */ +static inline void drm_connector_reference(struct drm_connector *connector) +{ + drm_mode_object_reference(&connector->base); +} + +/** + * drm_connector_unreference - unref a connector + * @connector: connector to unref + * + * This function decrements the connector's refcount and frees it if it drops to zero. + */ +static inline void drm_connector_unreference(struct drm_connector *connector) +{ + drm_mode_object_unreference(&connector->base); +} + +const char *drm_get_connector_status_name(enum drm_connector_status status); +const char *drm_get_subpixel_order_name(enum subpixel_order order); +const char *drm_get_dpms_name(int val); +const char *drm_get_dvi_i_subconnector_name(int val); +const char *drm_get_dvi_i_select_name(int val); +const char *drm_get_tv_subconnector_name(int val); +const char *drm_get_tv_select_name(int val); + +int drm_mode_create_dvi_i_properties(struct drm_device *dev); +int drm_mode_create_tv_properties(struct drm_device *dev, + unsigned int num_modes, + const char * const modes[]); +int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_suggested_offset_properties(struct drm_device *dev); + +int drm_mode_connector_set_path_property(struct drm_connector *connector, + const char *path); +int drm_mode_connector_set_tile_property(struct drm_connector *connector); +int drm_mode_connector_update_edid_property(struct drm_connector *connector, + const struct edid *edid); +#endif diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index f4d041800551..e30ea0be6417 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -39,31 +39,16 @@ #include <drm/drm_modeset.h> #include <drm/drm_framebuffer.h> #include <drm/drm_modes.h> +#include <drm/drm_connector.h> struct drm_device; struct drm_mode_set; -struct drm_object_properties; struct drm_file; struct drm_clip_rect; struct device_node; struct fence; struct edid; -#define DRM_OBJECT_MAX_PROPERTY 24 -struct drm_object_properties { - int count, atomic_count; - /* NOTE: if we ever start dynamically destroying properties (ie. - * not at drm_mode_config_cleanup() time), then we'd have to do - * a better job of detaching property from mode objects to avoid - * dangling property pointers: - */ - struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; - /* do not read/write values directly, but use drm_object_property_get_value() - * and drm_object_property_set_value(): - */ - uint64_t values[DRM_OBJECT_MAX_PROPERTY]; -}; - static inline int64_t U642I64(uint64_t val) { return (int64_t)*((int64_t *)&val); @@ -88,61 +73,6 @@ static inline uint64_t I642U64(int64_t val) #define DRM_REFLECT_Y BIT(5) #define DRM_REFLECT_MASK (DRM_REFLECT_X | DRM_REFLECT_Y) -enum drm_connector_status { - connector_status_connected = 1, - connector_status_disconnected = 2, - connector_status_unknown = 3, -}; - -enum subpixel_order { - SubPixelUnknown = 0, - SubPixelHorizontalRGB, - SubPixelHorizontalBGR, - SubPixelVerticalRGB, - SubPixelVerticalBGR, - SubPixelNone, -}; - -#define DRM_COLOR_FORMAT_RGB444 (1<<0) -#define DRM_COLOR_FORMAT_YCRCB444 (1<<1) -#define DRM_COLOR_FORMAT_YCRCB422 (1<<2) - -#define DRM_BUS_FLAG_DE_LOW (1<<0) -#define DRM_BUS_FLAG_DE_HIGH (1<<1) -/* drive data on pos. edge */ -#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2) -/* drive data on neg. edge */ -#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3) - -/* - * Describes a given display (e.g. CRT or flat panel) and its limitations. - */ -struct drm_display_info { - char name[DRM_DISPLAY_INFO_LEN]; - - /* Physical size */ - unsigned int width_mm; - unsigned int height_mm; - - /* Clock limits FIXME: storage format */ - unsigned int min_vfreq, max_vfreq; - unsigned int min_hfreq, max_hfreq; - unsigned int pixel_clock; - unsigned int bpc; - - enum subpixel_order subpixel_order; - u32 color_formats; - - const u32 *bus_formats; - unsigned int num_bus_formats; - u32 bus_flags; - - /* Mask of supported hdmi deep color modes */ - u8 edid_hdmi_dc_modes; - - u8 cea_rev; -}; - /* data corresponds to displayid vend/prod/serial */ struct drm_tile_group { struct kref refcount; @@ -179,7 +109,6 @@ struct drm_property { }; struct drm_crtc; -struct drm_connector; struct drm_encoder; struct drm_pending_vblank_event; struct drm_plane; @@ -188,7 +117,6 @@ struct drm_atomic_state; struct drm_crtc_helper_funcs; struct drm_encoder_helper_funcs; -struct drm_connector_helper_funcs; struct drm_plane_helper_funcs; /** @@ -734,291 +662,6 @@ struct drm_crtc { }; /** - * struct drm_connector_state - mutable connector state - * @connector: backpointer to the connector - * @crtc: CRTC to connect connector to, NULL if disabled - * @best_encoder: can be used by helpers and drivers to select the encoder - * @state: backpointer to global drm_atomic_state - */ -struct drm_connector_state { - struct drm_connector *connector; - - struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ - - struct drm_encoder *best_encoder; - - struct drm_atomic_state *state; -}; - -/** - * struct drm_connector_funcs - control connectors on a given device - * - * Each CRTC may have one or more connectors attached to it. The functions - * below allow the core DRM code to control connectors, enumerate available modes, - * etc. - */ -struct drm_connector_funcs { - /** - * @dpms: - * - * Legacy entry point to set the per-connector DPMS state. Legacy DPMS - * is exposed as a standard property on the connector, but diverted to - * this callback in the drm core. Note that atomic drivers don't - * implement the 4 level DPMS support on the connector any more, but - * instead only have an on/off "ACTIVE" property on the CRTC object. - * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_connector_dpms() to implement this hook. - * - * RETURNS: - * - * 0 on success or a negative error code on failure. - */ - int (*dpms)(struct drm_connector *connector, int mode); - - /** - * @reset: - * - * Reset connector hardware and software state to off. This function isn't - * called by the core directly, only through drm_mode_config_reset(). - * It's not a helper hook only for historical reasons. - * - * Atomic drivers can use drm_atomic_helper_connector_reset() to reset - * atomic state using this hook. - */ - void (*reset)(struct drm_connector *connector); - - /** - * @detect: - * - * Check to see if anything is attached to the connector. The parameter - * force is set to false whilst polling, true when checking the - * connector due to a user request. force can be used by the driver to - * avoid expensive, destructive operations during automated probing. - * - * FIXME: - * - * Note that this hook is only called by the probe helper. It's not in - * the helper library vtable purely for historical reasons. The only DRM - * core entry point to probe connector state is @fill_modes. - * - * RETURNS: - * - * drm_connector_status indicating the connector's status. - */ - enum drm_connector_status (*detect)(struct drm_connector *connector, - bool force); - - /** - * @force: - * - * This function is called to update internal encoder state when the - * connector is forced to a certain state by userspace, either through - * the sysfs interfaces or on the kernel cmdline. In that case the - * @detect callback isn't called. - * - * FIXME: - * - * Note that this hook is only called by the probe helper. It's not in - * the helper library vtable purely for historical reasons. The only DRM - * core entry point to probe connector state is @fill_modes. - */ - void (*force)(struct drm_connector *connector); - - /** - * @fill_modes: - * - * Entry point for output detection and basic mode validation. The - * driver should reprobe the output if needed (e.g. when hotplug - * handling is unreliable), add all detected modes to connector->modes - * and filter out any the device can't support in any configuration. It - * also needs to filter out any modes wider or higher than the - * parameters max_width and max_height indicate. - * - * The drivers must also prune any modes no longer valid from - * connector->modes. Furthermore it must update connector->status and - * connector->edid. If no EDID has been received for this output - * connector->edid must be NULL. - * - * Drivers using the probe helpers should use - * drm_helper_probe_single_connector_modes() or - * drm_helper_probe_single_connector_modes_nomerge() to implement this - * function. - * - * RETURNS: - * - * The number of modes detected and filled into connector->modes. - */ - int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); - - /** - * @set_property: - * - * This is the legacy entry point to update a property attached to the - * connector. - * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_connector_set_property() to implement this hook. - * - * This callback is optional if the driver does not support any legacy - * driver-private properties. - * - * RETURNS: - * - * 0 on success or a negative error code on failure. - */ - int (*set_property)(struct drm_connector *connector, struct drm_property *property, - uint64_t val); - - /** - * @late_register: - * - * This optional hook can be used to register additional userspace - * interfaces attached to the connector, light backlight control, i2c, - * DP aux or similar interfaces. It is called late in the driver load - * sequence from drm_connector_register() when registering all the - * core drm connector interfaces. Everything added from this callback - * should be unregistered in the early_unregister callback. - * - * Returns: - * - * 0 on success, or a negative error code on failure. - */ - int (*late_register)(struct drm_connector *connector); - - /** - * @early_unregister: - * - * This optional hook should be used to unregister the additional - * userspace interfaces attached to the connector from - * late_unregister(). It is called from drm_connector_unregister(), - * early in the driver unload sequence to disable userspace access - * before data structures are torndown. - */ - void (*early_unregister)(struct drm_connector *connector); - - /** - * @destroy: - * - * Clean up connector resources. This is called at driver unload time - * through drm_mode_config_cleanup(). It can also be called at runtime - * when a connector is being hot-unplugged for drivers that support - * connector hotplugging (e.g. DisplayPort MST). - */ - void (*destroy)(struct drm_connector *connector); - - /** - * @atomic_duplicate_state: - * - * Duplicate the current atomic state for this connector and return it. - * The core and helpers gurantee that any atomic state duplicated with - * this hook and still owned by the caller (i.e. not transferred to the - * driver by calling ->atomic_commit() from struct - * &drm_mode_config_funcs) will be cleaned up by calling the - * @atomic_destroy_state hook in this structure. - * - * Atomic drivers which don't subclass struct &drm_connector_state should use - * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the - * state structure to extend it with driver-private state should use - * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is - * duplicated in a consistent fashion across drivers. - * - * It is an error to call this hook before connector->state has been - * initialized correctly. - * - * NOTE: - * - * If the duplicate state references refcounted resources this hook must - * acquire a reference for each of them. The driver must release these - * references again in @atomic_destroy_state. - * - * RETURNS: - * - * Duplicated atomic state or NULL when the allocation failed. - */ - struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); - - /** - * @atomic_destroy_state: - * - * Destroy a state duplicated with @atomic_duplicate_state and release - * or unreference all resources it references - */ - void (*atomic_destroy_state)(struct drm_connector *connector, - struct drm_connector_state *state); - - /** - * @atomic_set_property: - * - * Decode a driver-private property value and store the decoded value - * into the passed-in state structure. Since the atomic core decodes all - * standardized properties (even for extensions beyond the core set of - * properties which might not be implemented by all drivers) this - * requires drivers to subclass the state structure. - * - * Such driver-private properties should really only be implemented for - * truly hardware/vendor specific state. Instead it is preferred to - * standardize atomic extension and decode the properties used to expose - * such an extension in the core. - * - * Do not call this function directly, use - * drm_atomic_connector_set_property() instead. - * - * This callback is optional if the driver does not support any - * driver-private atomic properties. - * - * NOTE: - * - * This function is called in the state assembly phase of atomic - * modesets, which can be aborted for any reason (including on - * userspace's request to just check whether a configuration would be - * possible). Drivers MUST NOT touch any persistent state (hardware or - * software) or data structures except the passed in @state parameter. - * - * Also since userspace controls in which order properties are set this - * function must not do any input validation (since the state update is - * incomplete and hence likely inconsistent). Instead any such input - * validation must be done in the various atomic_check callbacks. - * - * RETURNS: - * - * 0 if the property has been found, -EINVAL if the property isn't - * implemented by the driver (which shouldn't ever happen, the core only - * asks for properties attached to this connector). No other validation - * is allowed by the driver. The core already checks that the property - * value is within the range (integer, valid enum value, ...) the driver - * set when registering the property. - */ - int (*atomic_set_property)(struct drm_connector *connector, - struct drm_connector_state *state, - struct drm_property *property, - uint64_t val); - - /** - * @atomic_get_property: - * - * Reads out the decoded driver-private property. This is used to - * implement the GETCONNECTOR IOCTL. - * - * Do not call this function directly, use - * drm_atomic_connector_get_property() instead. - * - * This callback is optional if the driver does not support any - * driver-private atomic properties. - * - * RETURNS: - * - * 0 on success, -EINVAL if the property isn't implemented by the - * driver (which shouldn't ever happen, the core only asks for - * properties attached to this connector). - */ - int (*atomic_get_property)(struct drm_connector *connector, - const struct drm_connector_state *state, - struct drm_property *property, - uint64_t *val); -}; - -/** * struct drm_encoder_funcs - encoder controls * * Encoders sit between CRTCs and connectors. @@ -1069,8 +712,6 @@ struct drm_encoder_funcs { void (*early_unregister)(struct drm_encoder *encoder); }; -#define DRM_CONNECTOR_MAX_ENCODER 3 - /** * struct drm_encoder - central DRM encoder structure * @dev: parent DRM device @@ -1111,171 +752,6 @@ struct drm_encoder { const struct drm_encoder_helper_funcs *helper_private; }; -/* should we poll this connector for connects and disconnects */ -/* hot plug detectable */ -#define DRM_CONNECTOR_POLL_HPD (1 << 0) -/* poll for connections */ -#define DRM_CONNECTOR_POLL_CONNECT (1 << 1) -/* can cleanly poll for disconnections without flickering the screen */ -/* DACs should rarely do this without a lot of testing */ -#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) - -#define MAX_ELD_BYTES 128 - -/** - * struct drm_connector - central DRM connector control structure - * @dev: parent DRM device - * @kdev: kernel device for sysfs attributes - * @attr: sysfs attributes - * @head: list management - * @base: base KMS object - * @name: human readable name, can be overwritten by the driver - * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h - * @connector_type_id: index into connector type enum - * @interlace_allowed: can this connector handle interlaced modes? - * @doublescan_allowed: can this connector handle doublescan? - * @stereo_allowed: can this connector handle stereo modes? - * @registered: is this connector exposed (registered) with userspace? - * @modes: modes available on this connector (from fill_modes() + user) - * @status: one of the drm_connector_status enums (connected, not, or unknown) - * @probed_modes: list of modes derived directly from the display - * @display_info: information about attached display (e.g. from EDID) - * @funcs: connector control functions - * @edid_blob_ptr: DRM property containing EDID if present - * @properties: property tracking for this connector - * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling - * @dpms: current dpms state - * @helper_private: mid-layer private data - * @cmdline_mode: mode line parsed from the kernel cmdline for this connector - * @force: a DRM_FORCE_<foo> state for forced mode sets - * @override_edid: has the EDID been overwritten through debugfs for testing? - * @encoder_ids: valid encoders for this connector - * @encoder: encoder driving this connector, if any - * @eld: EDID-like data, if present - * @dvi_dual: dual link DVI, if found - * @max_tmds_clock: max clock rate, if found - * @latency_present: AV delay info from ELD, if found - * @video_latency: video latency info from ELD, if found - * @audio_latency: audio latency info from ELD, if found - * @null_edid_counter: track sinks that give us all zeros for the EDID - * @bad_edid_counter: track sinks that give us an EDID with invalid checksum - * @edid_corrupt: indicates whether the last read EDID was corrupt - * @debugfs_entry: debugfs directory for this connector - * @state: current atomic state for this connector - * @has_tile: is this connector connected to a tiled monitor - * @tile_group: tile group for the connected monitor - * @tile_is_single_monitor: whether the tile is one monitor housing - * @num_h_tile: number of horizontal tiles in the tile group - * @num_v_tile: number of vertical tiles in the tile group - * @tile_h_loc: horizontal location of this tile - * @tile_v_loc: vertical location of this tile - * @tile_h_size: horizontal size of this tile. - * @tile_v_size: vertical size of this tile. - * - * Each connector may be connected to one or more CRTCs, or may be clonable by - * another connector if they can share a CRTC. Each connector also has a specific - * position in the broader display (referred to as a 'screen' though it could - * span multiple monitors). - */ -struct drm_connector { - struct drm_device *dev; - struct device *kdev; - struct device_attribute *attr; - struct list_head head; - - struct drm_mode_object base; - - char *name; - - /** - * @index: Compacted connector index, which matches the position inside - * the mode_config.list for drivers not supporting hot-add/removing. Can - * be used as an array index. It is invariant over the lifetime of the - * connector. - */ - unsigned index; - - int connector_type; - int connector_type_id; - bool interlace_allowed; - bool doublescan_allowed; - bool stereo_allowed; - bool registered; - struct list_head modes; /* list of modes on this connector */ - - enum drm_connector_status status; - - /* these are modes added by probing with DDC or the BIOS */ - struct list_head probed_modes; - - struct drm_display_info display_info; - const struct drm_connector_funcs *funcs; - - struct drm_property_blob *edid_blob_ptr; - struct drm_object_properties properties; - - /** - * @path_blob_ptr: - * - * DRM blob property data for the DP MST path property. - */ - struct drm_property_blob *path_blob_ptr; - - /** - * @tile_blob_ptr: - * - * DRM blob property data for the tile property (used mostly by DP MST). - * This is meant for screens which are driven through separate display - * pipelines represented by &drm_crtc, which might not be running with - * genlocked clocks. For tiled panels which are genlocked, like - * dual-link LVDS or dual-link DSI, the driver should try to not expose - * the tiling and virtualize both &drm_crtc and &drm_plane if needed. - */ - struct drm_property_blob *tile_blob_ptr; - - uint8_t polled; /* DRM_CONNECTOR_POLL_* */ - - /* requested DPMS state */ - int dpms; - - const struct drm_connector_helper_funcs *helper_private; - - /* forced on connector */ - struct drm_cmdline_mode cmdline_mode; - enum drm_connector_force force; - bool override_edid; - uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; - struct drm_encoder *encoder; /* currently active encoder */ - - /* EDID bits */ - uint8_t eld[MAX_ELD_BYTES]; - bool dvi_dual; - int max_tmds_clock; /* in MHz */ - bool latency_present[2]; - int video_latency[2]; /* [0]: progressive, [1]: interlaced */ - int audio_latency[2]; - int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ - unsigned bad_edid_counter; - - /* Flag for raw EDID header corruption - used in Displayport - * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 - */ - bool edid_corrupt; - - struct dentry *debugfs_entry; - - struct drm_connector_state *state; - - /* DisplayID bits */ - bool has_tile; - struct drm_tile_group *tile_group; - bool tile_is_single_monitor; - - uint8_t num_h_tile, num_v_tile; - uint8_t tile_h_loc, tile_v_loc; - uint16_t tile_h_size, tile_v_size; -}; - /** * struct drm_plane_state - mutable plane state * @plane: backpointer to the plane @@ -2615,7 +2091,6 @@ struct drm_mode_config { for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder))) #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) -#define obj_to_connector(x) container_of(x, struct drm_connector, base) #define obj_to_encoder(x) container_of(x, struct drm_encoder, base) #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) @@ -2661,19 +2136,6 @@ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc) return 1 << drm_crtc_index(crtc); } -int drm_connector_init(struct drm_device *dev, - struct drm_connector *connector, - const struct drm_connector_funcs *funcs, - int connector_type); -int drm_connector_register(struct drm_connector *connector); -void drm_connector_unregister(struct drm_connector *connector); - -extern void drm_connector_cleanup(struct drm_connector *connector); -static inline unsigned drm_connector_index(struct drm_connector *connector) -{ - return connector->index; -} - extern __printf(5, 6) int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, @@ -2742,23 +2204,10 @@ extern int drm_crtc_force_disable_all(struct drm_device *dev); extern void drm_encoder_cleanup(struct drm_encoder *encoder); -extern const char *drm_get_connector_status_name(enum drm_connector_status status); -extern const char *drm_get_subpixel_order_name(enum subpixel_order order); -extern const char *drm_get_dpms_name(int val); -extern const char *drm_get_dvi_i_subconnector_name(int val); -extern const char *drm_get_dvi_i_select_name(int val); -extern const char *drm_get_tv_subconnector_name(int val); -extern const char *drm_get_tv_select_name(int val); extern void drm_mode_config_init(struct drm_device *dev); extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); -extern int drm_mode_connector_set_path_property(struct drm_connector *connector, - const char *path); -int drm_mode_connector_set_tile_property(struct drm_connector *connector); -extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, - const struct edid *edid); - extern int drm_display_info_set_bus_formats(struct drm_display_info *info, const u32 *formats, unsigned int num_formats); @@ -2819,16 +2268,6 @@ void drm_property_unreference_blob(struct drm_property_blob *blob); extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); extern int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name); -extern int drm_mode_create_dvi_i_properties(struct drm_device *dev); -extern int drm_mode_create_tv_properties(struct drm_device *dev, - unsigned int num_modes, - const char * const modes[]); -extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); -extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev); -extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev); - -extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, - struct drm_encoder *encoder); extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, int gamma_size); @@ -2888,22 +2327,6 @@ static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, return mo ? obj_to_encoder(mo) : NULL; } -/** - * drm_connector_lookup - lookup connector object - * @dev: DRM device - * @id: connector object id - * - * This function looks up the connector object specified by id - * add takes a reference to it. - */ -static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *mo; - mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR); - return mo ? obj_to_connector(mo) : NULL; -} - static inline struct drm_property *drm_property_find(struct drm_device *dev, uint32_t id) { @@ -2931,28 +2354,6 @@ static inline uint32_t drm_color_lut_extract(uint32_t user_input, return clamp_val(val, 0, max); } -/** - * drm_connector_reference - incr the connector refcnt - * @connector: connector - * - * This function increments the connector's refcount. - */ -static inline void drm_connector_reference(struct drm_connector *connector) -{ - drm_mode_object_reference(&connector->base); -} - -/** - * drm_connector_unreference - unref a connector - * @connector: connector to unref - * - * This function decrements the connector's refcount and frees it if it drops to zero. - */ -static inline void drm_connector_unreference(struct drm_connector *connector) -{ - drm_mode_object_unreference(&connector->base); -} - /* Plane list iterator for legacy (overlay only) planes. */ #define drm_for_each_legacy_plane(plane, dev) \ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \ diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index fed9fe81590c..1621e9b32330 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -28,6 +28,7 @@ #define __DRM_MODES_H__ #include <drm/drm_modeset.h> +#include <drm/drm_connector.h> /* * Note on terminology: here, for brevity and convenience, we refer to connector @@ -402,21 +403,6 @@ struct drm_display_mode { enum hdmi_picture_aspect picture_aspect_ratio; }; -/* mode specified on the command line */ -struct drm_cmdline_mode { - bool specified; - bool refresh_specified; - bool bpp_specified; - int xres, yres; - int bpp; - int refresh; - bool rb; - bool interlace; - bool cvt; - bool margins; - enum drm_connector_force force; -}; - /** * drm_mode_is_stereo - check for stereo mode flags * @mode: drm_display_mode to check diff --git a/include/drm/drm_modeset.h b/include/drm/drm_modeset.h index 0c2b0f3c5f34..fe910d5efe12 100644 --- a/include/drm/drm_modeset.h +++ b/include/drm/drm_modeset.h @@ -25,6 +25,7 @@ #include <linux/kref.h> struct drm_object_properties; +struct drm_property; struct drm_mode_object { uint32_t id; @@ -34,17 +35,36 @@ struct drm_mode_object { void (*free_cb)(struct kref *kref); }; +#define DRM_OBJECT_MAX_PROPERTY 24 +struct drm_object_properties { + int count, atomic_count; + /* NOTE: if we ever start dynamically destroying properties (ie. + * not at drm_mode_config_cleanup() time), then we'd have to do + * a better job of detaching property from mode objects to avoid + * dangling property pointers: + */ + struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; + /* do not read/write values directly, but use drm_object_property_get_value() + * and drm_object_property_set_value(): + */ + uint64_t values[DRM_OBJECT_MAX_PROPERTY]; +}; + +/* Avoid boilerplate. I'm tired of typing. */ +#define DRM_ENUM_NAME_FN(fnname, list) \ + const char *fnname(int val) \ + { \ + int i; \ + for (i = 0; i < ARRAY_SIZE(list); i++) { \ + if (list[i].type == val) \ + return list[i].name; \ + } \ + return "(unknown)"; \ + } + struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type); void drm_mode_object_reference(struct drm_mode_object *obj); void drm_mode_object_unreference(struct drm_mode_object *obj); -/* FIXME: This is temporary until we have a drm_connector.h */ -enum drm_connector_force { - DRM_FORCE_UNSPECIFIED, - DRM_FORCE_OFF, - DRM_FORCE_ON, /* force on analog part normally */ - DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ -}; - #endif |