diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mfd/dbx500-prcmu.h | 22 | ||||
| -rw-r--r-- | include/linux/mfd/iqs62x.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/max77686-private.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/max77714.h | 60 | ||||
| -rw-r--r-- | include/linux/mfd/mt6358/registers.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/mt6397/core.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/rk808.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/sy7636a.h | 34 |
8 files changed, 112 insertions, 24 deletions
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index cbf9d7619493..e7a7e70fdb38 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -556,31 +556,11 @@ static inline void prcmu_clear(unsigned int reg, u32 bits) #define PRCMU_QOS_ARM_OPP 3 #define PRCMU_QOS_DEFAULT_VALUE -1 -#ifdef CONFIG_DBX500_PRCMU_QOS_POWER - -unsigned long prcmu_qos_get_cpufreq_opp_delay(void); -void prcmu_qos_set_cpufreq_opp_delay(unsigned long); -void prcmu_qos_force_opp(int, s32); -int prcmu_qos_requirement(int pm_qos_class); -int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value); -int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value); -void prcmu_qos_remove_requirement(int pm_qos_class, char *name); -int prcmu_qos_add_notifier(int prcmu_qos_class, - struct notifier_block *notifier); -int prcmu_qos_remove_notifier(int prcmu_qos_class, - struct notifier_block *notifier); - -#else - static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void) { return 0; } -static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {} - -static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {} - static inline int prcmu_qos_requirement(int prcmu_qos_class) { return 0; @@ -613,6 +593,4 @@ static inline int prcmu_qos_remove_notifier(int prcmu_qos_class, return 0; } -#endif - #endif /* __MACH_PRCMU_H */ diff --git a/include/linux/mfd/iqs62x.h b/include/linux/mfd/iqs62x.h index 5ced55eae11b..ffc86010af74 100644 --- a/include/linux/mfd/iqs62x.h +++ b/include/linux/mfd/iqs62x.h @@ -14,6 +14,11 @@ #define IQS624_PROD_NUM 0x43 #define IQS625_PROD_NUM 0x4E +#define IQS620_HW_NUM_V0 0x82 +#define IQS620_HW_NUM_V1 IQS620_HW_NUM_V0 +#define IQS620_HW_NUM_V2 IQS620_HW_NUM_V0 +#define IQS620_HW_NUM_V3 0x92 + #define IQS621_ALS_FLAGS 0x16 #define IQS622_ALS_FLAGS 0x14 @@ -129,6 +134,8 @@ struct iqs62x_core { struct completion fw_done; enum iqs62x_ui_sel ui_sel; unsigned long event_cache; + u8 sw_num; + u8 hw_num; }; extern const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS]; diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index b1482b3cf353..3acceeedbaba 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -152,7 +152,7 @@ enum max77686_rtc_reg { MAX77686_RTC_WEEKDAY = 0x0A, MAX77686_RTC_MONTH = 0x0B, MAX77686_RTC_YEAR = 0x0C, - MAX77686_RTC_DATE = 0x0D, + MAX77686_RTC_MONTHDAY = 0x0D, MAX77686_ALARM1_SEC = 0x0E, MAX77686_ALARM1_MIN = 0x0F, MAX77686_ALARM1_HOUR = 0x10, @@ -352,7 +352,7 @@ enum max77802_rtc_reg { MAX77802_RTC_WEEKDAY = 0xCA, MAX77802_RTC_MONTH = 0xCB, MAX77802_RTC_YEAR = 0xCC, - MAX77802_RTC_DATE = 0xCD, + MAX77802_RTC_MONTHDAY = 0xCD, MAX77802_RTC_AE1 = 0xCE, MAX77802_ALARM1_SEC = 0xCF, MAX77802_ALARM1_MIN = 0xD0, diff --git a/include/linux/mfd/max77714.h b/include/linux/mfd/max77714.h new file mode 100644 index 000000000000..a970dc455426 --- /dev/null +++ b/include/linux/mfd/max77714.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Maxim MAX77714 Register and data structures definition. + * + * Copyright (C) 2022 Luca Ceresoli + * Author: Luca Ceresoli <luca@lucaceresoli.net> + */ + +#ifndef __LINUX_MFD_MAX77714_H_ +#define __LINUX_MFD_MAX77714_H_ + +#include <linux/bits.h> + +#define MAX77714_INT_TOP 0x00 +#define MAX77714_INT_TOPM 0x07 /* Datasheet says "read only", but it is RW */ + +#define MAX77714_INT_TOP_ONOFF BIT(1) +#define MAX77714_INT_TOP_RTC BIT(3) +#define MAX77714_INT_TOP_GPIO BIT(4) +#define MAX77714_INT_TOP_LDO BIT(5) +#define MAX77714_INT_TOP_SD BIT(6) +#define MAX77714_INT_TOP_GLBL BIT(7) + +#define MAX77714_32K_STATUS 0x30 +#define MAX77714_32K_STATUS_SIOSCOK BIT(5) +#define MAX77714_32K_STATUS_XOSCOK BIT(4) +#define MAX77714_32K_STATUS_32KSOURCE BIT(3) +#define MAX77714_32K_STATUS_32KLOAD_MSK 0x3 +#define MAX77714_32K_STATUS_32KLOAD_SHF 1 +#define MAX77714_32K_STATUS_CRYSTAL_CFG BIT(0) + +#define MAX77714_32K_CONFIG 0x31 +#define MAX77714_32K_CONFIG_XOSC_RETRY BIT(4) + +#define MAX77714_CNFG_GLBL2 0x91 +#define MAX77714_WDTEN BIT(2) +#define MAX77714_WDTSLPC BIT(3) +#define MAX77714_TWD_MASK 0x3 +#define MAX77714_TWD_2s 0x0 +#define MAX77714_TWD_16s 0x1 +#define MAX77714_TWD_64s 0x2 +#define MAX77714_TWD_128s 0x3 + +#define MAX77714_CNFG_GLBL3 0x92 +#define MAX77714_WDTC BIT(0) + +#define MAX77714_CNFG2_ONOFF 0x94 +#define MAX77714_WD_RST_WK BIT(5) + +/* Interrupts */ +enum { + MAX77714_IRQ_TOP_ONOFF, + MAX77714_IRQ_TOP_RTC, /* Real-time clock */ + MAX77714_IRQ_TOP_GPIO, /* GPIOs */ + MAX77714_IRQ_TOP_LDO, /* Low-dropout regulators */ + MAX77714_IRQ_TOP_SD, /* Step-down regulators */ + MAX77714_IRQ_TOP_GLBL, /* "Global resources": Low-Battery, overtemp... */ +}; + +#endif /* __LINUX_MFD_MAX77714_H_ */ diff --git a/include/linux/mfd/mt6358/registers.h b/include/linux/mfd/mt6358/registers.h index 201139b12140..3d33517f178c 100644 --- a/include/linux/mfd/mt6358/registers.h +++ b/include/linux/mfd/mt6358/registers.h @@ -94,6 +94,10 @@ #define MT6358_BUCK_VCORE_CON0 0x1488 #define MT6358_BUCK_VCORE_DBG0 0x149e #define MT6358_BUCK_VCORE_DBG1 0x14a0 +#define MT6358_BUCK_VCORE_SSHUB_CON0 0x14a4 +#define MT6358_BUCK_VCORE_SSHUB_CON1 0x14a6 +#define MT6358_BUCK_VCORE_SSHUB_ELR0 MT6358_BUCK_VCORE_SSHUB_CON1 +#define MT6358_BUCK_VCORE_SSHUB_DBG1 MT6358_BUCK_VCORE_DBG1 #define MT6358_BUCK_VCORE_ELR0 0x14aa #define MT6358_BUCK_VGPU_CON0 0x1508 #define MT6358_BUCK_VGPU_DBG0 0x151e @@ -169,6 +173,9 @@ #define MT6358_LDO_VSRAM_OTHERS_CON0 0x1ba6 #define MT6358_LDO_VSRAM_OTHERS_DBG0 0x1bc0 #define MT6358_LDO_VSRAM_OTHERS_DBG1 0x1bc2 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_CON0 0x1bc4 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1 0x1bc6 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_DBG1 MT6358_LDO_VSRAM_OTHERS_DBG1 #define MT6358_LDO_VSRAM_GPU_CON0 0x1bc8 #define MT6358_LDO_VSRAM_GPU_DBG0 0x1be2 #define MT6358_LDO_VSRAM_GPU_DBG1 0x1be4 diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h index 56f210eebc54..1cf78726503b 100644 --- a/include/linux/mfd/mt6397/core.h +++ b/include/linux/mfd/mt6397/core.h @@ -14,6 +14,7 @@ enum chip_id { MT6323_CHIP_ID = 0x23, MT6358_CHIP_ID = 0x58, MT6359_CHIP_ID = 0x59, + MT6366_CHIP_ID = 0x66, MT6391_CHIP_ID = 0x91, MT6397_CHIP_ID = 0x97, }; diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index a96e6d43ca06..58602032e642 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -373,6 +373,7 @@ enum rk805_reg { #define SWITCH2_EN BIT(6) #define SWITCH1_EN BIT(5) #define DEV_OFF_RST BIT(3) +#define DEV_RST BIT(2) #define DEV_OFF BIT(0) #define RTC_STOP BIT(0) diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h new file mode 100644 index 000000000000..22f03b2f851e --- /dev/null +++ b/include/linux/mfd/sy7636a.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Functions to access SY3686A power management chip. + * + * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/ + */ + +#ifndef __MFD_SY7636A_H +#define __MFD_SY7636A_H + +#define SY7636A_REG_OPERATION_MODE_CRL 0x00 +/* It is set if a gpio is used to control the regulator */ +#define SY7636A_OPERATION_MODE_CRL_VCOMCTL BIT(6) +#define SY7636A_OPERATION_MODE_CRL_ONOFF BIT(7) +#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01 +#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02 +#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff +#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03 +#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06 +#define SY7636A_REG_FAULT_FLAG 0x07 +#define SY7636A_FAULT_FLAG_PG BIT(0) +#define SY7636A_REG_TERMISTOR_READOUT 0x08 + +#define SY7636A_REG_MAX 0x08 + +#define VCOM_ADJUST_CTRL_MASK 0x1ff +// Used to shift the high byte +#define VCOM_ADJUST_CTRL_SHIFT 8 +// Used to scale from VCOM_ADJUST_CTRL to mv +#define VCOM_ADJUST_CTRL_SCAL 10000 + +#define FAULT_FLAG_SHIFT 1 + +#endif /* __LINUX_MFD_SY7636A_H */ |