summaryrefslogtreecommitdiff
path: root/samples
diff options
context:
space:
mode:
Diffstat (limited to 'samples')
-rw-r--r--samples/pktgen/README.rst17
-rw-r--r--samples/pktgen/functions.sh7
-rw-r--r--samples/pktgen/parameters.sh7
-rwxr-xr-xsamples/pktgen/pktgen_sample01_simple.sh22
-rwxr-xr-xsamples/pktgen/pktgen_sample02_multiqueue.sh28
-rwxr-xr-xsamples/pktgen/pktgen_sample03_burst_single_flow.sh12
-rwxr-xr-xsamples/pktgen/pktgen_sample04_many_flows.sh14
-rwxr-xr-xsamples/pktgen/pktgen_sample05_flow_per_thread.sh14
-rwxr-xr-xsamples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh30
9 files changed, 101 insertions, 50 deletions
diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index f4b38180e407..f4adeed5f5f0 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -28,11 +28,28 @@ across the sample scripts. Usage example is printed on errors::
-b : ($BURST) HW level bursting of SKBs
-v : ($VERBOSE) verbose
-x : ($DEBUG) debug
+ -6 : ($IP6) IPv6
-w : ($DELAY) Tx Delay value (ns)
+ -a : ($APPEND) Script will not reset generator's state, but will append its config
The global variable being set is also listed. E.g. the required
interface/device parameter "-i" sets variable $DEV.
+"-a" parameter may be used to create different flows simultaneously.
+In this mode script will keep the existing config, will append its settings.
+In this mode you'll have to manually run traffic with "pg_ctrl start".
+
+For example you may use:
+
+ source ./samples/pktgen/functions.sh
+ pg_ctrl reset
+ # add first device
+ ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f0 -m 34:80:0d:a3:fc:c9 -t 8
+ # add second device
+ ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f1 -m 34:80:0d:a3:fc:c9 -t 8
+ # run joint traffic on two devs
+ pg_ctrl start
+
Common functions
----------------
The functions.sh file provides; Three different shell functions for
diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
index dae06d5b38fa..a335393157eb 100644
--- a/samples/pktgen/functions.sh
+++ b/samples/pktgen/functions.sh
@@ -108,7 +108,12 @@ function pgset() {
fi
}
-[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+if [[ -z "$APPEND" ]]; then
+ if [[ $EUID -eq 0 ]]; then
+ # Cleanup pktgen setup on exit if thats not "append mode"
+ trap 'pg_ctrl "reset"' EXIT
+ fi
+fi
## -- General shell tricks --
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index dd6ef1d2e498..b4c1b371e4b8 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -20,12 +20,13 @@ function usage() {
echo " -x : (\$DEBUG) debug"
echo " -6 : (\$IP6) IPv6"
echo " -w : (\$DELAY) Tx Delay value (ns)"
+ echo " -a : (\$APPEND) Script will not reset generator's state, but will append its config"
echo ""
}
## --- Parse command line arguments / parameters ---
## echo "Commandline options:"
-while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6a" option; do
case $option in
i) # interface
export DEV=$OPTARG
@@ -83,6 +84,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6" option; do
export IP6=6
info "IP6: IP6=$IP6"
;;
+ a)
+ export APPEND=yes
+ info "Append mode: APPEND=$APPEND"
+ ;;
h|?|*)
usage;
err 2 "[ERROR] Unknown parameters!!!"
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index c2ad1fa32d3f..a09f3422fbcc 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -37,11 +37,11 @@ UDP_SRC_MAX=109
# General cleanup everything since last run
# (especially important if other threads were configured by other scripts)
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Add remove all other devices and add_device $DEV to thread 0
thread=0
-pg_thread $thread "rem_device_all"
+[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $DEV
# How many packets to send (zero means indefinitely)
@@ -77,11 +77,15 @@ pg_set $DEV "flag UDPSRC_RND"
pg_set $DEV "udp_src_min $UDP_SRC_MIN"
pg_set $DEV "udp_src_max $UDP_SRC_MAX"
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+ # start_run
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
+ echo "Done" >&2
-# Print results
-echo "Result device: $DEV"
-cat /proc/net/pktgen/$DEV
+ # Print results
+ echo "Result device: $DEV"
+ cat /proc/net/pktgen/$DEV
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi \ No newline at end of file
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index 49e1e81a2945..acae8ede0d6c 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -38,7 +38,7 @@ if [ -n "$DST_PORT" ]; then
fi
# General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
@@ -47,7 +47,7 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
- pg_thread $thread "rem_device_all"
+ [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Notice config queue to map to cpu (mirrors smp_processor_id())
@@ -81,14 +81,18 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
pg_set $dev "udp_src_max $UDP_SRC_MAX"
done
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+ # start_run
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
+ echo "Done" >&2
-# Print results
-for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
- dev=${DEV}@${thread}
- echo "Device: $dev"
- cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+ # Print results
+ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
+ dev=${DEV}@${thread}
+ echo "Device: $dev"
+ cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+ done
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index f9b67affb567..5adcf954de73 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -43,14 +43,14 @@ if [ -n "$DST_PORT" ]; then
fi
# General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
- pg_thread $thread "rem_device_all"
+ [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Base config
@@ -94,5 +94,9 @@ function control_c() {
# trap keyboard interrupt (Ctrl-C)
trap control_c SIGINT
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index ac2d037a6160..ddce876635aa 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -42,14 +42,14 @@ fi
read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
# General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
- pg_thread $thread "rem_device_all"
+ [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Base config
@@ -104,7 +104,11 @@ function print_result() {
# trap keyboard interrupt (Ctrl-C)
trap true SIGINT
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
-print_result
+ print_result
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 85256484c86f..4a65fe2fcee9 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -32,14 +32,14 @@ if [ -n "$DST_PORT" ]; then
fi
# General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
dev=${DEV}@${thread}
# Add remove all other devices and add_device $dev to thread
- pg_thread $thread "rem_device_all"
+ [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# Base config
@@ -88,7 +88,11 @@ function print_result() {
# trap keyboard interrupt (Ctrl-C)
trap true SIGINT
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
-print_result
+ print_result
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 7c73ab8fbe3c..10f1da571f40 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -44,7 +44,7 @@ if [ -n "$DST_PORT" ]; then
fi
# General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
# Threads are specified with parameter -t value in $THREADS
for ((i = 0; i < $THREADS; i++)); do
@@ -58,7 +58,7 @@ for ((i = 0; i < $THREADS; i++)); do
info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`"
# Add remove all other devices and add_device $dev to thread
- pg_thread $thread "rem_device_all"
+ [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
pg_thread $thread "add_device" $dev
# select queue and bind the queue and $dev in 1:1 relationship
@@ -99,14 +99,18 @@ for ((i = 0; i < $THREADS; i++)); do
done
# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
-
-# Print results
-for ((i = 0; i < $THREADS; i++)); do
- thread=${cpu_array[$((i+F_THREAD))]}
- dev=${DEV}@${thread}
- echo "Device: $dev"
- cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+if [ -z "$APPEND" ]; then
+ echo "Running... ctrl^C to stop" >&2
+ pg_ctrl "start"
+ echo "Done" >&2
+
+ # Print results
+ for ((i = 0; i < $THREADS; i++)); do
+ thread=${cpu_array[$((i+F_THREAD))]}
+ dev=${DEV}@${thread}
+ echo "Device: $dev"
+ cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+ done
+else
+ echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi