summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/cs4271.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/cs4271.c')
-rw-r--r--sound/soc/codecs/cs4271.c34
1 files changed, 34 insertions, 0 deletions
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index ac8742a1f25a..2415a4118dbd 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -167,6 +167,8 @@ struct cs4271_private {
int gpio_nreset;
/* GPIO that disable serial bus, if any */
int gpio_disable;
+ /* enable soft reset workaround */
+ bool enable_soft_reset;
};
/*
@@ -325,6 +327,33 @@ static int cs4271_hw_params(struct snd_pcm_substream *substream,
int i, ret;
unsigned int ratio, val;
+ if (cs4271->enable_soft_reset) {
+ /*
+ * Put the codec in soft reset and back again in case it's not
+ * currently streaming data. This way of bringing the codec in
+ * sync to the current clocks is not explicitly documented in
+ * the data sheet, but it seems to work fine, and in contrast
+ * to a read hardware reset, we don't have to sync back all
+ * registers every time.
+ */
+
+ if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
+ !dai->capture_active) ||
+ (substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
+ !dai->playback_active)) {
+ ret = snd_soc_update_bits(codec, CS4271_MODE2,
+ CS4271_MODE2_PDN,
+ CS4271_MODE2_PDN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_update_bits(codec, CS4271_MODE2,
+ CS4271_MODE2_PDN, 0);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
cs4271->rate = params_rate(params);
/* Configure DAC */
@@ -484,6 +513,10 @@ static int cs4271_probe(struct snd_soc_codec *codec)
if (of_get_property(codec->dev->of_node,
"cirrus,amutec-eq-bmutec", NULL))
amutec_eq_bmutec = true;
+
+ if (of_get_property(codec->dev->of_node,
+ "cirrus,enable-soft-reset", NULL))
+ cs4271->enable_soft_reset = true;
}
#endif
@@ -492,6 +525,7 @@ static int cs4271_probe(struct snd_soc_codec *codec)
gpio_nreset = cs4271plat->gpio_nreset;
amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec;
+ cs4271->enable_soft_reset = cs4271plat->enable_soft_reset;
}
if (gpio_nreset >= 0)