diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net')
| -rw-r--r-- | tools/testing/selftests/drivers/net/hw/Makefile | 25 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/devlink_port_split.py | 309 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/ethtool.sh | 302 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh | 118 | ||||
| -rw-r--r-- | tools/testing/selftests/drivers/net/hw/ethtool_lib.sh | 120 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/ethtool_mm.sh | 341 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh | 144 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh | 341 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh | 112 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/hw/loopback.sh | 103 | ||||
| -rw-r--r-- | tools/testing/selftests/drivers/net/hw/settings | 1 |
11 files changed, 1916 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile new file mode 100644 index 000000000000..2259a39a70ed --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = \ + devlink_port_split.py \ + ethtool.sh \ + ethtool_extended_state.sh \ + ethtool_mm.sh \ + ethtool_rmon.sh \ + hw_stats_l3.sh \ + hw_stats_l3_gre.sh \ + loopback.sh \ + # + +TEST_FILES := \ + ethtool_lib.sh \ + # + +TEST_INCLUDES := \ + ../../../net/lib.sh \ + ../../../net/forwarding/lib.sh \ + ../../../net/forwarding/ipip_lib.sh \ + ../../../net/forwarding/tc_common.sh \ + # + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/hw/devlink_port_split.py b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py new file mode 100755 index 000000000000..2d84c7a0be6b --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py @@ -0,0 +1,309 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from subprocess import PIPE, Popen +import json +import time +import argparse +import collections +import sys + +# +# Test port split configuration using devlink-port lanes attribute. +# The test is skipped in case the attribute is not available. +# +# First, check that all the ports with 1 lane fail to split. +# Second, check that all the ports with more than 1 lane can be split +# to all valid configurations (e.g., split to 2, split to 4 etc.) +# + + +# Kselftest framework requirement - SKIP code is 4 +KSFT_SKIP=4 +Port = collections.namedtuple('Port', 'bus_info name') + + +def run_command(cmd, should_fail=False): + """ + Run a command in subprocess. + Return: Tuple of (stdout, stderr). + """ + + p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True) + stdout, stderr = p.communicate() + stdout, stderr = stdout.decode(), stderr.decode() + + if stderr != "" and not should_fail: + print("Error sending command: %s" % cmd) + print(stdout) + print(stderr) + return stdout, stderr + + +class devlink_ports(object): + """ + Class that holds information on the devlink ports, required to the tests; + if_names: A list of interfaces in the devlink ports. + """ + + def get_if_names(dev): + """ + Get a list of physical devlink ports. + Return: Array of tuples (bus_info/port, if_name). + """ + + arr = [] + + cmd = "devlink -j port show" + stdout, stderr = run_command(cmd) + assert stderr == "" + ports = json.loads(stdout)['port'] + + validate_devlink_output(ports, 'flavour') + + for port in ports: + if dev in port: + if ports[port]['flavour'] == 'physical': + arr.append(Port(bus_info=port, name=ports[port]['netdev'])) + + return arr + + def __init__(self, dev): + self.if_names = devlink_ports.get_if_names(dev) + + +def get_max_lanes(port): + """ + Get the $port's maximum number of lanes. + Return: number of lanes, e.g. 1, 2, 4 and 8. + """ + + cmd = "devlink -j port show %s" % port + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + if 'lanes' in values: + lanes = values['lanes'] + else: + lanes = 0 + return lanes + + +def get_split_ability(port): + """ + Get the $port split ability. + Return: split ability, true or false. + """ + + cmd = "devlink -j port show %s" % port.name + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + return values['splittable'] + + +def split(k, port, should_fail=False): + """ + Split $port into $k ports. + If should_fail == True, the split should fail. Otherwise, should pass. + Return: Array of sub ports after splitting. + If the $port wasn't split, the array will be empty. + """ + + cmd = "devlink port split %s count %s" % (port.bus_info, k) + stdout, stderr = run_command(cmd, should_fail=should_fail) + + if should_fail: + if not test(stderr != "", "%s is unsplittable" % port.name): + print("split an unsplittable port %s" % port.name) + return create_split_group(port, k) + else: + if stderr == "": + return create_split_group(port, k) + print("didn't split a splittable port %s" % port.name) + + return [] + + +def unsplit(port): + """ + Unsplit $port. + """ + + cmd = "devlink port unsplit %s" % port + stdout, stderr = run_command(cmd) + test(stderr == "", "Unsplit port %s" % port) + + +def exists(port, dev): + """ + Check if $port exists in the devlink ports. + Return: True is so, False otherwise. + """ + + return any(dev_port.name == port + for dev_port in devlink_ports.get_if_names(dev)) + + +def exists_and_lanes(ports, lanes, dev): + """ + Check if every port in the list $ports exists in the devlink ports and has + $lanes number of lanes after splitting. + Return: True if both are True, False otherwise. + """ + + for port in ports: + max_lanes = get_max_lanes(port) + if not exists(port, dev): + print("port %s doesn't exist in devlink ports" % port) + return False + if max_lanes != lanes: + print("port %s has %d lanes, but %s were expected" + % (port, lanes, max_lanes)) + return False + return True + + +def test(cond, msg): + """ + Check $cond and print a message accordingly. + Return: True is pass, False otherwise. + """ + + if cond: + print("TEST: %-60s [ OK ]" % msg) + else: + print("TEST: %-60s [FAIL]" % msg) + + return cond + + +def create_split_group(port, k): + """ + Create the split group for $port. + Return: Array with $k elements, which are the split port group. + """ + + return list(port.name + "s" + str(i) for i in range(k)) + + +def split_unsplittable_port(port, k): + """ + Test that splitting of unsplittable port fails. + """ + + # split to max + new_split_group = split(k, port, should_fail=True) + + if new_split_group != []: + unsplit(port.bus_info) + + +def split_splittable_port(port, k, lanes, dev): + """ + Test that splitting of splittable port passes correctly. + """ + + new_split_group = split(k, port) + + # Once the split command ends, it takes some time to the sub ifaces' + # to get their names. Use udevadm to continue only when all current udev + # events are handled. + cmd = "udevadm settle" + stdout, stderr = run_command(cmd) + assert stderr == "" + + if new_split_group != []: + test(exists_and_lanes(new_split_group, lanes/k, dev), + "split port %s into %s" % (port.name, k)) + + unsplit(port.bus_info) + + +def validate_devlink_output(devlink_data, target_property=None): + """ + Determine if test should be skipped by checking: + 1. devlink_data contains values + 2. The target_property exist in devlink_data + """ + skip_reason = None + if any(devlink_data.values()): + if target_property: + skip_reason = "{} not found in devlink output, test skipped".format(target_property) + for key in devlink_data: + if target_property in devlink_data[key]: + skip_reason = None + else: + skip_reason = 'devlink output is empty, test skipped' + + if skip_reason: + print(skip_reason) + sys.exit(KSFT_SKIP) + + +def make_parser(): + parser = argparse.ArgumentParser(description='A test for port splitting.') + parser.add_argument('--dev', + help='The devlink handle of the device under test. ' + + 'The default is the first registered devlink ' + + 'handle.') + + return parser + + +def main(cmdline=None): + parser = make_parser() + args = parser.parse_args(cmdline) + + dev = args.dev + if not dev: + cmd = "devlink -j dev show" + stdout, stderr = run_command(cmd) + assert stderr == "" + + validate_devlink_output(json.loads(stdout)) + devs = json.loads(stdout)['dev'] + dev = list(devs.keys())[0] + + cmd = "devlink dev show %s" % dev + stdout, stderr = run_command(cmd) + if stderr != "": + print("devlink device %s can not be found" % dev) + sys.exit(1) + + ports = devlink_ports(dev) + + found_max_lanes = False + for port in ports.if_names: + max_lanes = get_max_lanes(port.name) + + # If max lanes is 0, do not test port splitting at all + if max_lanes == 0: + continue + + # If 1 lane, shouldn't be able to split + elif max_lanes == 1: + test(not get_split_ability(port), + "%s should not be able to split" % port.name) + split_unsplittable_port(port, max_lanes) + + # Else, splitting should pass and all the split ports should exist. + else: + lane = max_lanes + test(get_split_ability(port), + "%s should be able to split" % port.name) + while lane > 1: + split_splittable_port(port, lane, max_lanes, dev) + + lane //= 2 + found_max_lanes = True + + if not found_max_lanes: + print(f"Test not started, no port of device {dev} reports max_lanes") + sys.exit(KSFT_SKIP) + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/ethtool.sh b/tools/testing/selftests/drivers/net/hw/ethtool.sh new file mode 100755 index 000000000000..187429670ee7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool.sh @@ -0,0 +1,302 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + same_speeds_autoneg_off + different_speeds_autoneg_off + combination_of_neg_on_and_off + advertise_subset_of_speeds + check_highest_speed_is_chosen + different_speeds_autoneg_on +" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +same_speeds_autoneg_off() +{ + # Check that when each of the reported speeds is forced, the links come + # up and are operational. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + ethtool_set $h2 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "speed $speed autoneg off" + log_test "force of same speed autoneg off" + log_info "speed = $speed" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_off() +{ + # Test that when we force different speeds, links are not up and ping + # fails. + RET=0 + + local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $h1 speed $speed1 autoneg off + ethtool_set $h2 speed $speed2 autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds" + + log_test "force of different speeds autoneg off" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +combination_of_neg_on_and_off() +{ + # Test that when one device is forced to a speed supported by both + # endpoints and the other device is configured to autoneg on, the links + # are up and ping passes. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "h1-speed=$speed autoneg off, h2 autoneg on" + log_test "one side with autoneg off and another with autoneg on" + log_info "force speed = $speed" + done + + ethtool -s $h1 autoneg on +} + +hex_speed_value_get() +{ + local speed=$1; shift + + local shift_size=${speed_values[$speed]} + speed=$((0x1 << $"shift_size")) + printf "%#x" "$speed" +} + +subset_of_common_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local adver=$1; shift + + local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver)) + local speed_to_advertise=0 + local speed_to_remove=${speeds_arr[0]} + speed_to_remove+='base' + + local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver)) + + for speed in ${speeds_mode_arr[@]}; do + if [[ $speed != $speed_to_remove* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +speed_to_advertise_get() +{ + # The function returns the hex number that is composed by OR-ing all + # the modes corresponding to the provided speed. + local speed_without_mode=$1; shift + local supported_speeds=("$@"); shift + local speed_to_advertise=0 + + speed_without_mode+='base' + + for speed in ${supported_speeds[@]}; do + if [[ $speed == $speed_without_mode* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +advertise_subset_of_speeds() +{ + # Test that when one device advertises a subset of speeds and another + # advertises a specific speed (but all modes of this speed), the links + # are up and ping passes. + RET=0 + + local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + ethtool_set $h1 advertise $speed_1_to_advertise + + if [ $RET != 0 ]; then + log_test "advertise subset of speeds" + return + fi + + local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1)) + # Check only speeds that h1 advertised. Remove the first speed. + unset speeds_arr_without_mode[0] + local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1)) + + for speed_value in ${speeds_arr_without_mode[@]}; do + RET=0 + local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \ + "${speeds_arr_with_mode[@]}") + ethtool_set $h2 advertise $speed_2_to_advertise + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" + + log_test "advertise subset of speeds" + log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +check_highest_speed_is_chosen() +{ + # Test that when one device advertises a subset of speeds, the other + # chooses the highest speed. This test checks configuration without + # traffic. + RET=0 + + local max_speed + local chosen_speed + local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + + ethtool_set $h1 advertise $speed_to_advertise + + if [ $RET != 0 ]; then + log_test "check highest speed" + return + fi + + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + max_speed=${speeds_arr[0]} + for current in ${speeds_arr[@]}; do + if [[ $current -gt $max_speed ]]; then + max_speed=$current + fi + done + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + chosen_speed=$(ethtool $h1 | grep 'Speed:') + chosen_speed=${chosen_speed%"Mb/s"*} + chosen_speed=${chosen_speed#*"Speed: "} + ((chosen_speed == max_speed)) + check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed" + + log_test "check highest speed" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_on() +{ + # Test that when we configure links to advertise different speeds, + # links are not up and ping fails. + RET=0 + + local -a speeds=($(different_speeds_get $h1 $h2 1 1)) + local speed1=${speeds[0]} + local speed2=${speeds[1]} + + speed1=$(hex_speed_value_get $speed1) + speed2=$(hex_speed_value_get $speed2) + + ethtool_set $h1 advertise $speed1 + ethtool_set $h2 advertise $speed2 + + if (($RET)); then + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds autoneg on" + fi + + log_test "advertise different speeds autoneg on" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +skip_on_veth + +trap cleanup EXIT + +setup_prepare +setup_wait + +declare -gA speed_values +eval "speed_values=($(speeds_arr_get))" + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh new file mode 100755 index 000000000000..b0f931260a27 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh @@ -0,0 +1,118 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + autoneg + autoneg_force_mode + no_cable +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + swp3=$NETIF_NO_CABLE +} + +ethtool_ext_state() +{ + local dev=$1; shift + local expected_ext_state=$1; shift + local expected_ext_substate=${1:-""}; shift + + local ext_state=$(ethtool $dev | grep "Link detected" \ + | cut -d "(" -f2 | cut -d ")" -f1) + local ext_substate=$(echo $ext_state | cut -sd "," -f2 \ + | sed -e 's/^[[:space:]]*//') + ext_state=$(echo $ext_state | cut -d "," -f1) + + if [[ $ext_state != $expected_ext_state ]]; then + echo "Expected \"$expected_ext_state\", got \"$ext_state\"" + return 1 + fi + if [[ $ext_substate != $expected_ext_substate ]]; then + echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + return 1 + fi +} + +autoneg() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected") + check_err $? "$msg" + + log_test "Autoneg, No partner detected" + + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + ip link set dev $swp2 up + + local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $swp1 speed $speed1 autoneg off + ethtool_set $swp2 speed $speed2 autoneg off + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + log_test "Autoneg, No partner detected during force mode" + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +no_cable() +{ + local msg + + RET=0 + + ip link set dev $swp3 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") + check_err $? "$msg" + + log_test "No cable" + + ip link set dev $swp3 down +} + +skip_on_veth + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh new file mode 100644 index 000000000000..b9bfb45085af --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh @@ -0,0 +1,120 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +speeds_arr_get() +{ + cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \ + {sub(/,$/, "") \ + sub(/ETHTOOL_LINK_MODE_/,"") \ + sub(/_BIT/,"") \ + sub(/_Full/,"/Full") \ + sub(/_Half/,"/Half");\ + print "["$1"]="$3}' + + awk "${cmd}" /usr/include/linux/ethtool.h +} + +ethtool_set() +{ + local cmd="$@" + local out=$(ethtool -s $cmd 2>&1 | wc -l) + + check_err $out "error in configuration. $cmd" +} + +dev_linkmodes_params_get() +{ + local dev=$1; shift + local adver=$1; shift + local -a linkmodes_params + local param_count + local arr + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver)) + for ((i=0; i<${#dev_linkmodes[@]}; i++)); do + linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \ + # Replaces all non numbers with spaces + sed -e 's/[^0-9]/ /g' | \ + # Squeeze spaces in sequence to 1 space + tr -s ' ') + # Count how many numbers were found in the linkmode + param_count=$(echo "${linkmodes_params[$i]}" | wc -w) + if [[ $param_count -eq 1 ]]; then + linkmodes_params[$i]="${linkmodes_params[$i]} 1" + elif [[ $param_count -ge 3 ]]; then + arr=(${linkmodes_params[$i]}) + # Take only first two params + linkmodes_params[$i]=$(echo "${arr[@]:0:2}") + fi + done + echo ${linkmodes_params[@]} +} + +dev_speeds_get() +{ + local dev=$1; shift + local with_mode=$1; shift + local adver=$1; shift + local speeds_str + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + speeds_str=$(ethtool "$dev" | \ + # Snip everything before the link modes section. + sed -n '/'"$mode"':/,$p' | \ + # Quit processing the rest at the start of the next section. + # When checking, skip the header of this section (hence the 2,). + sed -n '2,${/^[\t][^ \t]/q};p' | \ + # Drop the section header of the current section. + cut -d':' -f2) + + local -a speeds_arr=($speeds_str) + if [[ $with_mode -eq 0 ]]; then + for ((i=0; i<${#speeds_arr[@]}; i++)); do + speeds_arr[$i]=${speeds_arr[$i]%base*} + done + fi + echo ${speeds_arr[@]} +} + +common_speeds_get() +{ + dev1=$1; shift + dev2=$1; shift + with_mode=$1; shift + adver=$1; shift + + local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver)) + local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver)) + + comm -12 \ + <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \ + <(printf '%s\n' "${dev2_speeds[@]}" | sort -u) +} + +different_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local with_mode=$1; shift + local adver=$1; shift + + local -a speeds_arr + + speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver)) + if [[ ${#speeds_arr[@]} < 2 ]]; then + check_err 1 "cannot check different speeds. There are not enough speeds" + fi + + echo ${speeds_arr[0]} ${speeds_arr[1]} +} diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh new file mode 100755 index 000000000000..c301e735c8ab --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh @@ -0,0 +1,341 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + manual_with_verification_h1_to_h2 + manual_with_verification_h2_to_h1 + manual_without_verification_h1_to_h2 + manual_without_verification_h2_to_h1 + manual_failed_verification_h1_to_h2 + manual_failed_verification_h2_to_h1 + lldp +" + +NUM_NETIFS=2 +REQUIRE_MZ=no +PREEMPTIBLE_PRIO=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +traffic_test() +{ + local if=$1; shift + local src=$1; shift + local num_pkts=10000 + local before= + local after= + local delta= + + if [ ${has_pmac_stats[$if]} = false ]; then + src="aggregate" + fi + + before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO + + after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + delta=$((after - before)) + + # Allow an extra 1% tolerance for random packets sent by the stack + [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ] +} + +manual_with_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit + # Processing state diagram whether the "send_r" variable (send response + # to verification frame) should be taken into consideration while the + # MAC Merge TX direction is disabled. That being said, at least the + # NXP ENETC does not, and requires tx-enabled on in order to respond to + # the link partner's verification frames. + ethtool --set-mm $rx tx-enabled on + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to finish + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_err "$?" "Verification did not succeed" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx tx-enabled off + + log_test "Manual configuration with verification: $tx to $rx" +} + +manual_with_verification_h1_to_h2() +{ + manual_with_verification $h1 $h2 +} + +manual_with_verification_h2_to_h1() +{ + manual_with_verification $h2 $h1 +} + +manual_without_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $tx verify-enabled off tx-enabled on + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'DISABLED' + check_err "$?" "Verification is not disabled" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + + log_test "Manual configuration without verification: $tx to $rx" +} + +manual_without_verification_h1_to_h2() +{ + manual_without_verification $h1 $h2 +} + +manual_without_verification_h2_to_h1() +{ + manual_without_verification $h2 $h1 +} + +manual_failed_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $rx pmac-enabled off + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to time out + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_fail "$?" "Verification succeeded when it shouldn't have" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_fail "$?" "pMAC TX is active when it shouldn't have" + + traffic_test $tx "emac" + check_err "$?" "Traffic did not get sent through $tx's eMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx pmac-enabled on + + log_test "Manual configuration with failed verification: $tx to $rx" +} + +manual_failed_verification_h1_to_h2() +{ + manual_failed_verification $h1 $h2 +} + +manual_failed_verification_h2_to_h1() +{ + manual_failed_verification $h2 $h1 +} + +smallest_supported_add_frag_size() +{ + local iface=$1 + local rx_min_frag_size= + + rx_min_frag_size=$(ethtool --json --show-mm $iface | \ + jq '.[]."rx-min-frag-size"') + + if [ $rx_min_frag_size -le 60 ]; then + echo 0 + elif [ $rx_min_frag_size -le 124 ]; then + echo 1 + elif [ $rx_min_frag_size -le 188 ]; then + echo 2 + elif [ $rx_min_frag_size -le 252 ]; then + echo 3 + else + echo "$iface: RX min frag size $rx_min_frag_size cannot be advertised over LLDP" + exit 1 + fi +} + +expected_add_frag_size() +{ + local iface=$1 + local requested=$2 + local min=$(smallest_supported_add_frag_size $iface) + + [ $requested -le $min ] && echo $min || echo $requested +} + +lldp_change_add_frag_size() +{ + local add_frag_size=$1 + local pattern= + + lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null + # Wait for TLVs to be received + sleep 2 + pattern=$(printf "Additional fragment size: %d" \ + $(expected_add_frag_size $h1 $add_frag_size)) + lldptool -i $h2 -t -n -V addEthCaps | grep -q "$pattern" +} + +lldp() +{ + RET=0 + + systemctl start lldpad + + # Configure the interfaces to receive and transmit LLDPDUs + lldptool -L -i $h1 adminStatus=rxtx >/dev/null + lldptool -L -i $h2 adminStatus=rxtx >/dev/null + + # Enable the transmission of Additional Ethernet Capabilities TLV + lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null + lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null + + # Wait for TLVs to be received + sleep 2 + + lldptool -i $h1 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h1 pMAC TX is not active" + + lldptool -i $h2 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h2 pMAC TX is not active" + + lldp_change_add_frag_size 3 + check_err "$?" "addFragSize 3" + + lldp_change_add_frag_size 2 + check_err "$?" "addFragSize 2" + + lldp_change_add_frag_size 1 + check_err "$?" "addFragSize 1" + + lldp_change_add_frag_size 0 + check_err "$?" "addFragSize 0" + + traffic_test $h1 "pmac" + check_err "$?" "Traffic did not get sent through $h1's pMAC" + + traffic_test $h2 "pmac" + check_err "$?" "Traffic did not get sent through $h2's pMAC" + + systemctl stop lldpad + + log_test "LLDP" +} + +h1_create() +{ + ip link set dev $h1 up + + tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 + + ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off +} + +h2_create() +{ + ip link set dev $h2 up + + ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off + + tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 +} + +h1_destroy() +{ + ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off + + tc qdisc del dev $h1 root + + ip link set dev $h1 down +} + +h2_destroy() +{ + tc qdisc del dev $h2 root + + ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off + + ip link set dev $h2 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +check_ethtool_mm_support +check_tc_fp_support +require_command lldptool +bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually" + +for netif in ${NETIFS[@]}; do + ethtool --show-mm $netif 2>&1 &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: $netif does not support MAC Merge" + exit $ksft_skip + fi + + if check_ethtool_pmac_std_stats_support $netif eth-mac; then + has_pmac_stats[$netif]=true + else + has_pmac_stats[$netif]=false + echo "$netif does not report pMAC statistics, falling back to aggregate" + fi +done + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh new file mode 100755 index 000000000000..709433a4c886 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh @@ -0,0 +1,144 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + rmon_rx_histogram + rmon_tx_histogram +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +ETH_FCS_LEN=4 +ETH_HLEN=$((6+6+2)) + +declare -A netif_mtu + +ensure_mtu() +{ + local iface=$1; shift + local len=$1; shift + local current=$(ip -j link show dev $iface | jq -r '.[0].mtu') + local required=$((len - ETH_HLEN - ETH_FCS_LEN)) + + if [ $current -lt $required ]; then + ip link set dev $iface mtu $required || return 1 + fi +} + +bucket_test() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local bucket=$1; shift + local len=$1; shift + local num_rx=10000 + local num_tx=20000 + local expected= + local before= + local after= + local delta= + + # Mausezahn does not include FCS bytes in its length - but the + # histogram counters do + len=$((len - ETH_FCS_LEN)) + + before=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + # Send 10k one way and 20k in the other, to detect counters + # mapped to the wrong direction + $MZ $neigh -q -c $num_rx -p $len -a own -b bcast -d 10us + $MZ $iface -q -c $num_tx -p $len -a own -b bcast -d 10us + + after=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + delta=$((after - before)) + + expected=$([ $set = rx ] && echo $num_rx || echo $num_tx) + + # Allow some extra tolerance for other packets sent by the stack + [ $delta -ge $expected ] && [ $delta -le $((expected + 100)) ] +} + +rmon_histogram() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local nbuckets=0 + local step= + + RET=0 + + while read -r -a bucket; do + step="$set-pkts${bucket[0]}to${bucket[1]} on $iface" + + for if in $iface $neigh; do + if ! ensure_mtu $if ${bucket[0]}; then + log_test_skip "$if does not support the required MTU for $step" + return + fi + done + + if ! bucket_test $iface $neigh $set $nbuckets ${bucket[0]}; then + check_err 1 "$step failed" + return 1 + fi + log_test "$step" + nbuckets=$((nbuckets + 1)) + done < <(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null) + + if [ $nbuckets -eq 0 ]; then + log_test_skip "$iface does not support $set histogram counters" + return + fi +} + +rmon_rx_histogram() +{ + rmon_histogram $h1 $h2 rx + rmon_histogram $h2 $h1 rx +} + +rmon_tx_histogram() +{ + rmon_histogram $h1 $h2 tx + rmon_histogram $h2 $h1 tx +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + for iface in $h1 $h2; do + netif_mtu[$iface]=$(ip -j link show dev $iface | jq -r '.[0].mtu') + ip link set dev $iface up + done +} + +cleanup() +{ + pre_cleanup + + for iface in $h2 $h1; do + ip link set dev $iface \ + mtu ${netif_mtu[$iface]} \ + down + done +} + +check_ethtool_counter_group_support +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh new file mode 100755 index 000000000000..744760117005 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh @@ -0,0 +1,341 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +--------------------+ +----------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.200 + | | + $h2.200 | +# | 192.0.2.1/28 | | | | 192.0.2.18/28 | +# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 | +# | | | | | | +# | $h1 + | | + $h2 | +# | | | | | | +# +------------------|-+ +-|--------------------+ +# | | +# +------------------|-------------------------|--------------------+ +# | SW | | | +# | | | | +# | $rp1 + + $rp2 | +# | | | | +# | $rp1.200 + + $rp2.200 | +# | 192.0.2.2/28 192.0.2.17/28 | +# | 2001:db8:1::2/64 2001:db8:2::2/64 | +# | | +# +-----------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + respin_enablement + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + reapply_config + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + test_stats_report_rx + test_stats_report_tx + test_destroy_enabled + test_double_enable +" +NUM_NETIFS=4 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64 + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + vlan_destroy $h1 200 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64 + ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 + ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + vlan_destroy $h2 200 + simple_if_fini $h2 +} + +router_rp1_200_create() +{ + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 + ip stats set dev $rp1.200 l3_stats on +} + +router_rp1_200_destroy() +{ + ip stats set dev $rp1.200 l3_stats off + ip address del dev $rp1.200 2001:db8:1::2/64 + ip address del dev $rp1.200 192.0.2.2/28 + ip link del dev $rp1.200 +} + +router_create() +{ + ip link set dev $rp1 up + router_rp1_200_create + + ip link set dev $rp2 up + vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64 +} + +router_destroy() +{ + vlan_destroy $rp2 200 + ip link set dev $rp2 down + + router_rp1_200_destroy + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1mac=$(mac_get $rp1) + rp2mac=$(mac_get $rp2) + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.200 192.0.2.18 " IPv4" +} + +ping_ipv6() +{ + ping_test $h1.200 2001:db8:2::1 " IPv6" +} + +send_packets_rx_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_rx_ipv6() +{ + $MZ $h1.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv4() +{ + $MZ $h2.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv6() +{ + $MZ $h2.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \ + -q -t udp sp=54321,dp=12345 +} + +___test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + "$@" + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" +} + +__test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + RET=0 + ___test_stats "$dir" "$prot" + log_test "Test $dir packets: $prot" +} + +test_stats_rx_ipv4() +{ + __test_stats rx ipv4 +} + +test_stats_tx_ipv4() +{ + __test_stats tx ipv4 +} + +test_stats_rx_ipv6() +{ + __test_stats rx ipv6 +} + +test_stats_tx_ipv6() +{ + __test_stats tx ipv6 +} + +# Make sure everything works well even after stats have been disabled and +# reenabled on the same device without touching the L3 configuration. +respin_enablement() +{ + log_info "Turning stats off and on again" + ip stats set dev $rp1.200 l3_stats off + ip stats set dev $rp1.200 l3_stats on +} + +# For the initial run, l3_stats is enabled on a completely set up netdevice. Now +# do it the other way around: enabling the L3 stats on an L2 netdevice, and only +# then apply the L3 configuration. +reapply_config() +{ + log_info "Reapplying configuration" + + router_rp1_200_destroy + + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode none + ip stats set dev $rp1.200 l3_stats on + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 +} + +__test_stats_report() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + ip address flush dev $rp1.200 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + log_test "Test ${dir} packets: stats pushed on loss of L3" + + ip stats set dev $rp1.200 l3_stats off + ip link del dev $rp1.200 + router_rp1_200_create +} + +test_stats_report_rx() +{ + __test_stats_report rx ipv4 +} + +test_stats_report_tx() +{ + __test_stats_report tx ipv4 +} + +test_destroy_enabled() +{ + RET=0 + + ip link del dev $rp1.200 + router_rp1_200_create + + log_test "Destroy l3_stats-enabled netdev" +} + +test_double_enable() +{ + RET=0 + ___test_stats rx ipv4 \ + ip stats set dev $rp1.200 l3_stats on + log_test "Test stat retention across a spurious enablement" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used') +kind=$(ip -j -d link show dev $rp1 | + jq -r '.[].linkinfo.info_kind') +if [[ $used != true ]]; then + if [[ $kind == veth ]]; then + log_test_skip "l3_stats not offloaded on veth interface" + EXIT_STATUS=$ksft_skip + else + RET=1 log_test "l3_stats not offloaded" + fi +else + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh new file mode 100755 index 000000000000..354be353455f --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh @@ -0,0 +1,112 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test L3 stats on IP-in-IP GRE tunnel without key. + +# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more +# details. + +ALL_TESTS=" + ping_ipv4 + test_stats_rx + test_stats_tx +" +NUM_NETIFS=6 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source "$lib_dir"/../../../net/forwarding/ipip_lib.sh + +setup_prepare() +{ + h1=${NETIFS[p1]} + ol1=${NETIFS[p2]} + + ul1=${NETIFS[p3]} + ul2=${NETIFS[p4]} + + ol2=${NETIFS[p5]} + h2=${NETIFS[p6]} + + ol1mac=$(mac_get $ol1) + + forwarding_enable + vrf_prepare + h1_create + h2_create + sw1_flat_create gre $ol1 $ul1 + sw2_flat_create gre $ol2 $ul2 + ip stats set dev g1a l3_stats on + ip stats set dev g2a l3_stats on +} + +cleanup() +{ + pre_cleanup + + ip stats set dev g1a l3_stats off + ip stats set dev g2a l3_stats off + + sw2_flat_destroy $ol2 $ul2 + sw1_flat_destroy $ol1 $ul1 + h2_destroy + h1_destroy + + vrf_cleanup + forwarding_restore +} + +ping_ipv4() +{ + RET=0 + + ping_test $h1 192.0.2.18 " gre flat" +} + +send_packets_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1 -c 21 -d 20msec -p 100 \ + -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +test_stats() +{ + local dev=$1; shift + local dir=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $dev $dir packets) + send_packets_ipv4 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $dev $dir packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + + log_test "Test $dir packets: $prot" +} + +test_stats_tx() +{ + test_stats g1a tx +} + +test_stats_rx() +{ + test_stats g2a rx +} + +skip_on_veth + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/loopback.sh b/tools/testing/selftests/drivers/net/hw/loopback.sh new file mode 100755 index 000000000000..5acc3ff820aa --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/loopback.sh @@ -0,0 +1,103 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +ALL_TESTS="loopback_test" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/tc_common.sh +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +loopback_test() +{ + RET=0 + + tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ + skip_hw arp_op reply arp_tip 192.0.2.1 action drop + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_fail $? "Matched on a filter without loopback setup" + + ethtool -K $h1 loopback on + check_err $? "Failed to enable loopback" + + setup_wait_dev $h1 + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_err $? "Did not match on filter with loopback" + + ethtool -K $h1 loopback off + check_err $? "Failed to disable loopback" + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 2 + check_fail $? "Matched on a filter after loopback was removed" + + tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower + + log_test "loopback" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + h1_create + h2_create + + if ethtool -k $h1 | grep loopback | grep -q fixed; then + log_test "SKIP: dev $h1 does not support loopback feature" + exit $ksft_skip + fi +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/settings b/tools/testing/selftests/drivers/net/hw/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/settings @@ -0,0 +1 @@ +timeout=0 |