diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 900 |
1 files changed, 547 insertions, 353 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index c0801df15f54..18bb0d0cf4bd 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -15,6 +15,7 @@ timeout_test=$((timeout_poll * 2 + 1)) mptcp_connect="" capture=0 checksum=0 +ip_mptcp=0 do_all_tests=1 TEST_COUNT=0 @@ -239,6 +240,16 @@ is_v6() [ -z "${1##*:*}" ] } +is_addr() +{ + [ -z "${1##*[.:]*}" ] +} + +is_number() +{ + [[ $1 == ?(-)+([0-9]) ]] +} + # $1: ns, $2: port wait_local_port_listen() { @@ -278,6 +289,109 @@ wait_rm_addr() done } +pm_nl_set_limits() +{ + local ns=$1 + local addrs=$2 + local subflows=$3 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp limits set add_addr_accepted $addrs subflows $subflows + else + ip netns exec $ns ./pm_nl_ctl limits $addrs $subflows + fi +} + +pm_nl_add_endpoint() +{ + local ns=$1 + local addr=$2 + local flags + local port + local dev + local id + local nr=2 + + for p in $@ + do + if [ $p = "flags" ]; then + eval _flags=\$"$nr" + [ ! -z $_flags ]; flags="flags $_flags" + fi + if [ $p = "dev" ]; then + eval _dev=\$"$nr" + [ ! -z $_dev ]; dev="dev $_dev" + fi + if [ $p = "id" ]; then + eval _id=\$"$nr" + [ ! -z $_id ]; id="id $_id" + fi + if [ $p = "port" ]; then + eval _port=\$"$nr" + [ ! -z $_port ]; port="port $_port" + fi + + let nr+=1 + done + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint add $addr ${_flags//","/" "} $dev $id $port + else + ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port + fi +} + +pm_nl_del_endpoint() +{ + local ns=$1 + local id=$2 + local addr=$3 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint delete id $id $addr + else + ip netns exec $ns ./pm_nl_ctl del $id $addr + fi +} + +pm_nl_flush_endpoint() +{ + local ns=$1 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint flush + else + ip netns exec $ns ./pm_nl_ctl flush + fi +} + +pm_nl_show_endpoints() +{ + local ns=$1 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint show + else + ip netns exec $ns ./pm_nl_ctl dump + fi +} + +pm_nl_change_endpoint() +{ + local ns=$1 + local flags=$2 + local id=$3 + local addr=$4 + local port="" + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint change id $id ${flags//","/" "} + else + if [ $5 -ne 0 ]; then port="port $5"; fi + ip netns exec $ns ./pm_nl_ctl set $addr flags $flags $port + fi +} + do_transfer() { listener_ns="$1" @@ -289,7 +403,7 @@ do_transfer() addr_nr_ns1="$7" addr_nr_ns2="$8" speed="$9" - bkup="${10}" + sflags="${10}" port=$((10000+$TEST_COUNT)) TEST_COUNT=$((TEST_COUNT+1)) @@ -378,31 +492,36 @@ do_transfer() else addr="10.0.$counter.1" fi - ip netns exec $ns1 ./pm_nl_ctl add $addr flags signal + pm_nl_add_endpoint $ns1 $addr flags signal let counter+=1 let add_nr_ns1-=1 done elif [ $addr_nr_ns1 -lt 0 ]; then let rm_nr_ns1=-addr_nr_ns1 if [ $rm_nr_ns1 -lt 8 ]; then - counter=1 - pos=1 - dump=(`ip netns exec ${listener_ns} ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - while [ $counter -le $rm_nr_ns1 ] - do - id=${dump[$pos]} - rm_addr=$(rm_addr_count ${connector_ns}) - ip netns exec ${listener_ns} ./pm_nl_ctl del $id - wait_rm_addr ${connector_ns} ${rm_addr} - let counter+=1 - let pos+=5 + counter=0 + pm_nl_show_endpoints ${listener_ns} | while read line; do + local arr=($line) + local nr=0 + + for i in ${arr[@]}; do + if [ $i = "id" ]; then + if [ $counter -eq $rm_nr_ns1 ]; then + break + fi + id=${arr[$nr+1]} + rm_addr=$(rm_addr_count ${connector_ns}) + pm_nl_del_endpoint ${listener_ns} $id + wait_rm_addr ${connector_ns} ${rm_addr} + let counter+=1 + fi + let nr+=1 done - fi + done elif [ $rm_nr_ns1 -eq 8 ]; then - ip netns exec ${listener_ns} ./pm_nl_ctl flush + pm_nl_flush_endpoint ${listener_ns} elif [ $rm_nr_ns1 -eq 9 ]; then - ip netns exec ${listener_ns} ./pm_nl_ctl del 0 ${connect_addr} + pm_nl_del_endpoint ${listener_ns} 0 ${connect_addr} fi fi @@ -426,30 +545,36 @@ do_transfer() else addr="10.0.$counter.2" fi - ip netns exec $ns2 ./pm_nl_ctl add $addr flags $flags + pm_nl_add_endpoint $ns2 $addr flags $flags let counter+=1 let add_nr_ns2-=1 done elif [ $addr_nr_ns2 -lt 0 ]; then let rm_nr_ns2=-addr_nr_ns2 if [ $rm_nr_ns2 -lt 8 ]; then - counter=1 - pos=1 - dump=(`ip netns exec ${connector_ns} ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - while [ $counter -le $rm_nr_ns2 ] - do - # rm_addr are serialized, allow the previous one to complete - id=${dump[$pos]} - rm_addr=$(rm_addr_count ${listener_ns}) - ip netns exec ${connector_ns} ./pm_nl_ctl del $id - wait_rm_addr ${listener_ns} ${rm_addr} - let counter+=1 - let pos+=5 + counter=0 + pm_nl_show_endpoints ${connector_ns} | while read line; do + local arr=($line) + local nr=0 + + for i in ${arr[@]}; do + if [ $i = "id" ]; then + if [ $counter -eq $rm_nr_ns2 ]; then + break + fi + # rm_addr are serialized, allow the previous one to + # complete + id=${arr[$nr+1]} + rm_addr=$(rm_addr_count ${listener_ns}) + pm_nl_del_endpoint ${connector_ns} $id + wait_rm_addr ${listener_ns} ${rm_addr} + let counter+=1 + fi + let nr+=1 done - fi + done elif [ $rm_nr_ns2 -eq 8 ]; then - ip netns exec ${connector_ns} ./pm_nl_ctl flush + pm_nl_flush_endpoint ${connector_ns} elif [ $rm_nr_ns2 -eq 9 ]; then local addr if is_v6 "${connect_addr}"; then @@ -457,19 +582,34 @@ do_transfer() else addr="10.0.1.2" fi - ip netns exec ${connector_ns} ./pm_nl_ctl del 0 $addr + pm_nl_del_endpoint ${connector_ns} 0 $addr fi fi - if [ ! -z $bkup ]; then + if [ ! -z $sflags ]; then sleep 1 for netns in "$ns1" "$ns2"; do - dump=(`ip netns exec $netns ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - addr=${dump[${#dump[@]} - 1]} - backup="ip netns exec $netns ./pm_nl_ctl set $addr flags $bkup" - $backup - fi + pm_nl_show_endpoints $netns | while read line; do + local arr=($line) + local addr + local port=0 + local id + + for i in ${arr[@]}; do + if is_addr $i; then + addr=$i + elif is_number $i; then + # The minimum expected port number is 10000 + if [ $i -gt 10000 ]; then + port=$i + # The maximum id number is 255 + elif [ $i -lt 255 ]; then + id=$i + fi + fi + done + pm_nl_change_endpoint $netns $sflags $id $addr $port + done done fi @@ -545,7 +685,7 @@ run_tests() addr_nr_ns1="${5:-0}" addr_nr_ns2="${6:-0}" speed="${7:-fast}" - bkup="${8:-""}" + sflags="${8:-""}" lret=0 oldin="" @@ -574,7 +714,7 @@ run_tests() fi do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \ - ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${bkup} + ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${sflags} lret=$? } @@ -978,51 +1118,51 @@ subflows_tests() # subflow limited by client reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 0 + pm_nl_set_limits $ns2 0 0 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow, limited by client" 0 0 0 # subflow limited by server reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 0 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow, limited by server" 1 1 0 # subflow reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow" 1 1 1 # multiple subflows reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple subflows" 2 2 2 # multiple subflows limited by server reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple subflows, limited by server" 2 2 1 # single subflow, dev reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow dev ns2eth3 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow, dev" 1 1 1 } @@ -1032,28 +1172,28 @@ subflows_error_tests() # If a single subflow is configured, and matches the MPC src # address, no additional subflow should be created reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr "no MPC reuse with single endpoint" 0 0 0 # multiple subflows, with subflow creation error reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr "multi subflows, with failing subflow" 1 1 1 # multiple subflows, with subflow timeout on MPJ reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr "multi subflows, with subflow timeout" 1 1 1 @@ -1062,9 +1202,9 @@ subflows_error_tests() # closed subflow (due to reset) is not reused if additional # subflows are added later reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow & @@ -1074,7 +1214,7 @@ subflows_error_tests() # mpj subflow will be in TW after the reset wait_for_tw $ns2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow wait # additional subflow could be created only if the PM select @@ -1086,16 +1226,16 @@ signal_address_tests() { # add_address, unused reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "unused signal address" 0 0 0 chk_add_nr 1 1 # accept and use add_addr reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address" 1 1 1 chk_add_nr 1 1 @@ -1105,59 +1245,59 @@ signal_address_tests() # belong to different subnets or one of the listed local address could be # used for 'add_addr' subflow reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflow and signal" 2 2 2 chk_add_nr 1 1 # accept and use add_addr with additional subflows reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple subflows and signal" 3 3 3 chk_add_nr 1 1 # signal addresses reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal addresses" 3 3 3 chk_add_nr 3 3 # signal invalid addresses reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal invalid addresses" 1 1 1 chk_add_nr 3 3 # signal addresses race test reset - ip netns exec $ns1 ./pm_nl_ctl limits 4 4 - ip netns exec $ns2 ./pm_nl_ctl limits 4 4 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags signal + pm_nl_set_limits $ns1 4 4 + pm_nl_set_limits $ns2 4 4 + pm_nl_add_endpoint $ns1 10.0.1.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns2 10.0.1.2 flags signal + pm_nl_add_endpoint $ns2 10.0.2.2 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags signal + pm_nl_add_endpoint $ns2 10.0.4.2 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal addresses race test" 3 3 3 @@ -1178,11 +1318,11 @@ link_failure_tests() # active backup and link switch-over. # Let's set some arbitrary (low) virtual link limits. init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow run_tests $ns1 $ns2 10.0.1.1 1 chk_join_nr "multiple flows, signal, link failure" 3 3 3 chk_add_nr 1 1 @@ -1192,11 +1332,11 @@ link_failure_tests() # for bidirectional transfer reset init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow run_tests $ns1 $ns2 10.0.1.1 2 chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3 chk_add_nr 1 1 @@ -1206,11 +1346,11 @@ link_failure_tests() # will never be used reset init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 2 export FAILING_LINKS="1" - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup run_tests $ns1 $ns2 10.0.1.1 1 chk_join_nr "backup subflow unused, link failure" 2 2 2 chk_add_nr 1 1 @@ -1220,10 +1360,10 @@ link_failure_tests() # the traffic reset init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup export FAILING_LINKS="1 2" run_tests $ns1 $ns2 10.0.1.1 1 chk_join_nr "backup flow used, multi links fail" 2 2 2 @@ -1235,10 +1375,10 @@ link_failure_tests() # for bidirectional transfer reset init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup run_tests $ns1 $ns2 10.0.1.1 2 chk_join_nr "backup flow used, bidi, link failure" 2 2 2 chk_add_nr 1 1 @@ -1250,38 +1390,38 @@ add_addr_timeout_tests() { # add_addr timeout reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1 chk_add_nr 4 0 # add_addr timeout IPv6 reset_with_add_addr_timeout 6 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1 chk_add_nr 4 0 # signal addresses timeout reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 0 0 0 least chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2 chk_add_nr 8 0 # signal invalid addresses timeout reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 0 0 0 least chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1 chk_add_nr 8 0 @@ -1291,28 +1431,28 @@ remove_tests() { # single subflow, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow chk_join_nr "remove single subflow" 1 1 1 chk_rm_nr 1 1 # multiple subflows, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow chk_join_nr "remove multiple subflows" 2 2 2 chk_rm_nr 2 2 # single address, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow chk_join_nr "remove single address" 1 1 1 chk_add_nr 1 1 @@ -1320,10 +1460,10 @@ remove_tests() # subflow and signal, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow chk_join_nr "remove subflow and signal" 2 2 2 chk_add_nr 1 1 @@ -1331,11 +1471,11 @@ remove_tests() # subflows and signal, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow chk_join_nr "remove subflows and signal" 3 3 3 chk_add_nr 1 1 @@ -1343,11 +1483,11 @@ remove_tests() # addresses remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow chk_join_nr "remove addresses" 3 3 3 chk_add_nr 3 3 @@ -1355,11 +1495,11 @@ remove_tests() # invalid addresses remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow chk_join_nr "remove invalid addresses" 1 1 1 chk_add_nr 3 3 @@ -1367,11 +1507,11 @@ remove_tests() # subflows and signal, flush reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow chk_join_nr "flush subflows and signal" 3 3 3 chk_add_nr 1 1 @@ -1379,22 +1519,22 @@ remove_tests() # subflows flush reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow id 150 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 3 3 + pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow chk_join_nr "flush subflows" 3 3 3 chk_rm_nr 3 3 # addresses flush reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow chk_join_nr "flush addresses" 3 3 3 chk_add_nr 3 3 @@ -1402,11 +1542,11 @@ remove_tests() # invalid addresses flush reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow chk_join_nr "flush invalid addresses" 1 1 1 chk_add_nr 3 3 @@ -1414,18 +1554,18 @@ remove_tests() # remove id 0 subflow reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow chk_join_nr "remove id 0 subflow" 1 1 1 chk_rm_nr 1 1 # remove id 0 address reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow chk_join_nr "remove id 0 address" 1 1 1 chk_add_nr 1 1 @@ -1436,37 +1576,37 @@ add_tests() { # add single subflow reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow chk_join_nr "add single subflow" 1 1 1 # add signal address reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow chk_join_nr "add signal address" 1 1 1 chk_add_nr 1 1 # add multiple subflows reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow chk_join_nr "add multiple subflows" 2 2 2 # add multiple subflows IPv6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow chk_join_nr "add multiple subflows IPv6" 2 2 2 # add multiple addresses IPv6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow chk_join_nr "add multiple addresses IPv6" 2 2 2 chk_add_nr 2 2 @@ -1476,33 +1616,33 @@ ipv6_tests() { # subflow IPv6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 dev ns2eth3 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow chk_join_nr "single subflow IPv6" 1 1 1 # add_address, unused IPv6 reset - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow chk_join_nr "unused signal address IPv6" 0 0 0 chk_add_nr 1 1 # signal address IPv6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow chk_join_nr "single address IPv6" 1 1 1 chk_add_nr 1 1 # single address IPv6, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow chk_join_nr "remove single address IPv6" 1 1 1 chk_add_nr 1 1 @@ -1510,10 +1650,10 @@ ipv6_tests() # subflow and signal IPv6, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 dev ns2eth3 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow chk_join_nr "remove subflow and signal IPv6" 2 2 2 chk_add_nr 1 1 @@ -1524,76 +1664,76 @@ v4mapped_tests() { # subflow IPv4-mapped to IPv4-mapped reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr "single subflow IPv4-mapped" 1 1 1 # signal address IPv4-mapped with IPv4-mapped sk reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr "signal address IPv4-mapped" 1 1 1 chk_add_nr 1 1 # subflow v4-map-v6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr "single subflow v4-map-v6" 1 1 1 # signal address v4-map-v6 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 "::ffff:10.0.1.1" chk_join_nr "signal address v4-map-v6" 1 1 1 chk_add_nr 1 1 # subflow v6-map-v4 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow v6-map-v4" 1 1 1 # signal address v6-map-v4 reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address v6-map-v4" 1 1 1 chk_add_nr 1 1 # no subflow IPv6 to v4 address reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "no JOIN with diff families v4-v6" 0 0 0 # no subflow IPv6 to v4 address even if v6 has a valid v4 at the end reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0 # no subflow IPv4 to v6 address, no need to slow down too then reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 dead:beef:1::1 chk_join_nr "no JOIN with diff families v6-v4" 0 0 0 } @@ -1602,50 +1742,60 @@ backup_tests() { # single subflow, backup reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup chk_join_nr "single subflow, backup" 1 1 1 chk_prio_nr 0 1 # single address, backup reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup chk_join_nr "single address, backup" 1 1 1 chk_add_nr 1 1 chk_prio_nr 1 0 + + # single address with port, backup + reset + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr "single address with port, backup" 1 1 1 + chk_add_nr 1 1 + chk_prio_nr 1 0 } add_addr_ports_tests() { # signal address with port reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address with port" 1 1 1 chk_add_nr 1 1 1 # subflow and signal with port reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflow and signal with port" 2 2 2 chk_add_nr 1 1 1 # single address with port, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 1 run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow chk_join_nr "remove single address with port" 1 1 1 chk_add_nr 1 1 1 @@ -1653,10 +1803,10 @@ add_addr_ports_tests() # subflow and signal with port, remove reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow chk_join_nr "remove subflow and signal with port" 2 2 2 chk_add_nr 1 1 1 @@ -1664,11 +1814,11 @@ add_addr_ports_tests() # subflows and signal with port, flush reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow chk_join_nr "flush subflows and signal with port" 3 3 3 chk_add_nr 1 1 @@ -1676,20 +1826,20 @@ add_addr_ports_tests() # multiple addresses with port reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100 + pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple addresses with port" 2 2 2 chk_add_nr 2 2 2 # multiple addresses with ports reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101 + pm_nl_set_limits $ns2 2 2 run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple addresses with ports" 2 2 2 chk_add_nr 2 2 2 @@ -1699,56 +1849,56 @@ syncookies_tests() { # single subflow, syncookies reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow with syn cookies" 1 1 1 # multiple subflows with syn cookies reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "multiple subflows with syn cookies" 2 2 2 # multiple subflows limited by server reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflows limited by server w cookies" 2 1 1 # test signal address with cookies reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address with syn cookies" 1 1 1 chk_add_nr 1 1 # test cookie with subflow and signal reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflow and signal w cookies" 2 2 2 chk_add_nr 1 1 # accept and use add_addr with additional subflows reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflows and signal w. cookies" 3 3 3 chk_add_nr 1 1 @@ -1758,29 +1908,29 @@ checksum_tests() { # checksum test 0 0 reset_with_checksum 0 0 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_csum_nr "checksum test 0 0" # checksum test 1 1 reset_with_checksum 1 1 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_csum_nr "checksum test 1 1" # checksum test 0 1 reset_with_checksum 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_csum_nr "checksum test 0 1" # checksum test 1 0 reset_with_checksum 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 run_tests $ns1 $ns2 10.0.1.1 chk_csum_nr "checksum test 1 0" } @@ -1789,26 +1939,26 @@ deny_join_id0_tests() { # subflow allow join id0 ns1 reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow allow join id0 ns1" 1 1 1 # subflow allow join id0 ns2 reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "single subflow allow join id0 ns2" 0 0 0 # signal address allow join id0 ns1 # ADD_ADDRs are not affected by allow_join_id0 value. reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address allow join id0 ns1" 1 1 1 chk_add_nr 1 1 @@ -1816,28 +1966,28 @@ deny_join_id0_tests() # signal address allow join id0 ns2 # ADD_ADDRs are not affected by allow_join_id0 value. reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "signal address allow join id0 ns2" 1 1 1 chk_add_nr 1 1 # subflow and address allow join id0 ns1 reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 2 2 + pm_nl_set_limits $ns2 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflow and address allow join id0 1" 2 2 2 # subflow and address allow join id0 ns2 reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow + pm_nl_set_limits $ns1 2 2 + pm_nl_set_limits $ns2 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow run_tests $ns1 $ns2 10.0.1.1 chk_join_nr "subflow and address allow join id0 2" 1 1 1 } @@ -1848,10 +1998,10 @@ fullmesh_tests() # 2 fullmesh addrs in ns2, added before the connection, # 1 non-fullmesh addr in ns1, added during the connection. reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 4 - ip netns exec $ns2 ./pm_nl_ctl limits 1 4 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow,fullmesh - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,fullmesh + pm_nl_set_limits $ns1 0 4 + pm_nl_set_limits $ns2 1 4 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow chk_join_nr "fullmesh test 2x1" 4 4 4 chk_add_nr 1 1 @@ -1860,9 +2010,9 @@ fullmesh_tests() # 1 non-fullmesh addr in ns1, added before the connection, # 1 fullmesh addr in ns2, added during the connection. reset - ip netns exec $ns1 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 1 3 + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow chk_join_nr "fullmesh test 1x1" 3 3 3 chk_add_nr 1 1 @@ -1871,9 +2021,9 @@ fullmesh_tests() # 1 non-fullmesh addr in ns1, added before the connection, # 2 fullmesh addrs in ns2, added during the connection. reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 5 - ip netns exec $ns2 ./pm_nl_ctl limits 1 5 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 2 5 + pm_nl_set_limits $ns2 1 5 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow chk_join_nr "fullmesh test 1x2" 5 5 5 chk_add_nr 1 1 @@ -1883,12 +2033,50 @@ fullmesh_tests() # 2 fullmesh addrs in ns2, added during the connection, # limit max_subflows to 4. reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 4 - ip netns exec $ns2 ./pm_nl_ctl limits 1 4 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal + pm_nl_set_limits $ns1 2 4 + pm_nl_set_limits $ns2 1 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow chk_join_nr "fullmesh test 1x2, limited" 4 4 4 chk_add_nr 1 1 + + # set fullmesh flag + reset + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh + chk_join_nr "set fullmesh flag test" 2 2 2 + chk_rm_nr 0 1 + + # set nofullmesh flag + reset + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh + chk_join_nr "set nofullmesh flag test" 2 2 2 + chk_rm_nr 0 1 + + # set backup,fullmesh flags + reset + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow backup,fullmesh + chk_join_nr "set backup,fullmesh flags test" 2 2 2 + chk_prio_nr 0 1 + chk_rm_nr 0 1 + + # set nobackup,nofullmesh flags + reset + pm_nl_set_limits $ns1 4 4 + pm_nl_set_limits $ns2 4 4 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup,nofullmesh + chk_join_nr "set nobackup,nofullmesh flags test" 2 2 2 + chk_prio_nr 0 1 + chk_rm_nr 0 1 } all_tests() @@ -1930,6 +2118,7 @@ usage() echo " -m fullmesh_tests" echo " -c capture pcap files" echo " -C enable data checksum" + echo " -i use ip mptcp" echo " -h help" } @@ -1951,9 +2140,12 @@ for arg in "$@"; do if [[ "${arg}" =~ ^"-"[0-9a-zA-Z]*"C"[0-9a-zA-Z]*$ ]]; then checksum=1 fi + if [[ "${arg}" =~ ^"-"[0-9a-zA-Z]*"i"[0-9a-zA-Z]*$ ]]; then + ip_mptcp=1 + fi - # exception for the capture/checksum options, the rest means: a part of the tests - if [ "${arg}" != "-c" ] && [ "${arg}" != "-C" ]; then + # exception for the capture/checksum/ip_mptcp options, the rest means: a part of the tests + if [ "${arg}" != "-c" ] && [ "${arg}" != "-C" ] && [ "${arg}" != "-i" ]; then do_all_tests=0 fi done @@ -1963,7 +2155,7 @@ if [ $do_all_tests -eq 1 ]; then exit $ret fi -while getopts 'fesltra64bpkdmchCS' opt; do +while getopts 'fesltra64bpkdmchCSi' opt; do case $opt in f) subflows_tests @@ -2014,6 +2206,8 @@ while getopts 'fesltra64bpkdmchCS' opt; do ;; C) ;; + i) + ;; h | *) usage ;; |