diff options
Diffstat (limited to 'tools/testing')
37 files changed, 1287 insertions, 44 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 220d04f958a6..7570e36d636d 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -30,7 +30,7 @@ my %default = ( "EMAIL_WHEN_STARTED" => 0, "NUM_TESTS" => 1, "TEST_TYPE" => "build", - "BUILD_TYPE" => "randconfig", + "BUILD_TYPE" => "oldconfig", "MAKE_CMD" => "make", "CLOSE_CONSOLE_SIGNAL" => "INT", "TIMEOUT" => 120, @@ -1030,7 +1030,7 @@ sub __read_config { } if (!$skip && $rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after $type\n$_"; + die "$name: $.: Garbage found after $type\n$_"; } if ($skip && $type eq "TEST_START") { @@ -1063,7 +1063,7 @@ sub __read_config { } if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after DEFAULTS\n$_"; + die "$name: $.: Garbage found after DEFAULTS\n$_"; } } elsif (/^\s*INCLUDE\s+(\S+)/) { @@ -1154,7 +1154,7 @@ sub __read_config { # on of these sections that have SKIP defined. # The save variable can be # defined multiple times and the new one simply overrides - # the prevous one. + # the previous one. set_variable($lvalue, $rvalue); } else { @@ -1234,7 +1234,7 @@ sub read_config { foreach my $option (keys %not_used) { print "$option\n"; } - print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n"; + print "Set IGNORE_UNUSED = 1 to have ktest ignore unused variables\n"; if (!read_yn "Do you want to continue?") { exit -1; } @@ -1345,7 +1345,7 @@ sub eval_option { # Check for recursive evaluations. # 100 deep should be more than enough. if ($r++ > 100) { - die "Over 100 evaluations accurred with $option\n" . + die "Over 100 evaluations occurred with $option\n" . "Check for recursive variables\n"; } $prev = $option; @@ -1383,7 +1383,7 @@ sub reboot { } else { # Make sure everything has been written to disk - run_ssh("sync"); + run_ssh("sync", 10); if (defined($time)) { start_monitor; @@ -1461,7 +1461,7 @@ sub get_test_name() { sub dodie { - # avoid recusion + # avoid recursion return if ($in_die); $in_die = 1; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index c3bc933d437b..27666b8007ed 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -10,7 +10,7 @@ # # Options set in the beginning of the file are considered to be -# default options. These options can be overriden by test specific +# default options. These options can be overridden by test specific # options, with the following exceptions: # # LOG_FILE @@ -204,7 +204,7 @@ # # This config file can also contain "config variables". # These are assigned with ":=" instead of the ktest option -# assigment "=". +# assignment "=". # # The difference between ktest options and config variables # is that config variables can be used multiple times, @@ -263,7 +263,7 @@ #### Using options in other options #### # # Options that are defined in the config file may also be used -# by other options. All options are evaulated at time of +# by other options. All options are evaluated at time of # use (except that config variables are evaluated at config # processing time). # @@ -505,7 +505,7 @@ #TEST = ssh user@machine /root/run_test # The build type is any make config type or special command -# (default randconfig) +# (default oldconfig) # nobuild - skip the clean and build step # useconfig:/path/to/config - use the given config and run # oldconfig on it. @@ -707,7 +707,7 @@ # Line to define a successful boot up in console output. # This is what the line contains, not the entire line. If you need -# the entire line to match, then use regural expression syntax like: +# the entire line to match, then use regular expression syntax like: # (do not add any quotes around it) # # SUCCESS_LINE = ^MyBox Login:$ @@ -839,7 +839,7 @@ # (ignored if POWEROFF_ON_SUCCESS is set) #REBOOT_ON_SUCCESS = 1 -# In case there are isses with rebooting, you can specify this +# In case there are issues with rebooting, you can specify this # to always powercycle after this amount of time after calling # reboot. # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just @@ -848,7 +848,7 @@ # (default undefined) #POWERCYCLE_AFTER_REBOOT = 5 -# In case there's isses with halting, you can specify this +# In case there's issues with halting, you can specify this # to always poweroff after this amount of time after calling # halt. # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just @@ -972,7 +972,7 @@ # # PATCHCHECK_START is required and is the first patch to # test (the SHA1 of the commit). You may also specify anything -# that git checkout allows (branch name, tage, HEAD~3). +# that git checkout allows (branch name, tag, HEAD~3). # # PATCHCHECK_END is the last patch to check (default HEAD) # @@ -994,7 +994,7 @@ # IGNORE_WARNINGS is set for the given commit's sha1 # # IGNORE_WARNINGS can be used to disable the failure of patchcheck -# on a particuler commit (SHA1). You can add more than one commit +# on a particular commit (SHA1). You can add more than one commit # by adding a list of SHA1s that are space delimited. # # If BUILD_NOCLEAN is set, then make mrproper will not be run on @@ -1093,7 +1093,7 @@ # whatever reason. (Can't reboot, want to inspect each iteration) # Doing a BISECT_MANUAL will have the test wait for you to # tell it if the test passed or failed after each iteration. -# This is basicall the same as running git bisect yourself +# This is basically the same as running git bisect yourself # but ktest will rebuild and install the kernel for you. # # BISECT_CHECK = 1 (optional, default 0) @@ -1239,7 +1239,7 @@ # # CONFIG_BISECT_EXEC (optional) # The config bisect is a separate program that comes with ktest.pl. -# By befault, it will look for: +# By default, it will look for: # `pwd`/config-bisect.pl # the location ktest.pl was executed from. # If it does not find it there, it will look for: # `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 6ec503912bea..b93fa645ee54 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -33,6 +33,7 @@ TARGETS += memory-hotplug TARGETS += mount TARGETS += mqueue TARGETS += net +TARGETS += net/forwarding TARGETS += net/mptcp TARGETS += netfilter TARGETS += networking/timestamping diff --git a/tools/testing/selftests/bpf/prog_tests/send_signal_sched_switch.c b/tools/testing/selftests/bpf/prog_tests/send_signal_sched_switch.c new file mode 100644 index 000000000000..189a34a7addb --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/send_signal_sched_switch.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <test_progs.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/mman.h> +#include <pthread.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include "test_send_signal_kern.skel.h" + +static void sigusr1_handler(int signum) +{ +} + +#define THREAD_COUNT 100 + +static void *worker(void *p) +{ + int i; + + for ( i = 0; i < 1000; i++) + usleep(1); + + return NULL; +} + +void test_send_signal_sched_switch(void) +{ + struct test_send_signal_kern *skel; + pthread_t threads[THREAD_COUNT]; + u32 duration = 0; + int i, err; + + signal(SIGUSR1, sigusr1_handler); + + skel = test_send_signal_kern__open_and_load(); + if (CHECK(!skel, "skel_open_and_load", "skeleton open_and_load failed\n")) + return; + + skel->bss->pid = getpid(); + skel->bss->sig = SIGUSR1; + + err = test_send_signal_kern__attach(skel); + if (CHECK(err, "skel_attach", "skeleton attach failed\n")) + goto destroy_skel; + + for (i = 0; i < THREAD_COUNT; i++) { + err = pthread_create(threads + i, NULL, worker, NULL); + if (CHECK(err, "pthread_create", "Error creating thread, %s\n", + strerror(errno))) + goto destroy_skel; + } + + for (i = 0; i < THREAD_COUNT; i++) + pthread_join(threads[i], NULL); + +destroy_skel: + test_send_signal_kern__destroy(skel); +} diff --git a/tools/testing/selftests/bpf/progs/test_send_signal_kern.c b/tools/testing/selftests/bpf/progs/test_send_signal_kern.c index 1acc91e87bfc..b4233d3efac2 100644 --- a/tools/testing/selftests/bpf/progs/test_send_signal_kern.c +++ b/tools/testing/selftests/bpf/progs/test_send_signal_kern.c @@ -31,6 +31,12 @@ int send_signal_tp(void *ctx) return bpf_send_signal_test(ctx); } +SEC("tracepoint/sched/sched_switch") +int send_signal_tp_sched(void *ctx) +{ + return bpf_send_signal_test(ctx); +} + SEC("perf_event") int send_signal_perf(void *ctx) { diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 93040ca83e60..8da77cda5f4a 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -1062,6 +1062,48 @@ static struct btf_raw_test raw_tests[] = { .err_str = "Member exceeds struct_size", }, +/* Test member unexceeds the size of struct + * + * enum E { + * E0, + * E1, + * }; + * + * struct A { + * char m; + * enum E __attribute__((packed)) n; + * }; + */ +{ + .descr = "size check test #5", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, sizeof(int)), + /* char */ /* [2] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 8, 1), + /* enum E { */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_ENUM, 0, 2), 1), + BTF_ENUM_ENC(NAME_TBD, 0), + BTF_ENUM_ENC(NAME_TBD, 1), + /* } */ + /* struct A { */ /* [4] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 2), 2), + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* char m; */ + BTF_MEMBER_ENC(NAME_TBD, 3, 8),/* enum E __attribute__((packed)) n; */ + /* } */ + BTF_END_RAW, + }, + .str_sec = "\0E\0E0\0E1\0A\0m\0n", + .str_sec_size = sizeof("\0E\0E0\0E1\0A\0m\0n"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "size_check5_map", + .key_size = sizeof(int), + .value_size = 2, + .key_type_id = 1, + .value_type_id = 4, + .max_entries = 4, +}, + /* typedef const void * const_void_ptr; * struct A { * const_void_ptr m; diff --git a/tools/testing/selftests/bpf/verifier/jmp32.c b/tools/testing/selftests/bpf/verifier/jmp32.c index bf0322eb5346..bd5cae4a7f73 100644 --- a/tools/testing/selftests/bpf/verifier/jmp32.c +++ b/tools/testing/selftests/bpf/verifier/jmp32.c @@ -62,6 +62,21 @@ .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, }, { + "jset32: ignores upper bits", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_LD_IMM64(BPF_REG_7, 0x8000000000000000), + BPF_LD_IMM64(BPF_REG_8, 0x8000000000000000), + BPF_JMP_REG(BPF_JSET, BPF_REG_7, BPF_REG_8, 1), + BPF_EXIT_INSN(), + BPF_JMP32_REG(BPF_JSET, BPF_REG_7, BPF_REG_8, 1), + BPF_MOV64_IMM(BPF_REG_0, 2), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .retval = 2, +}, +{ "jset32: min/max deduction", .insns = { BPF_RAND_UEXT_R7, diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile index 012b2cf69c11..40211cd8f0e6 100644 --- a/tools/testing/selftests/firmware/Makefile +++ b/tools/testing/selftests/firmware/Makefile @@ -1,13 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only # Makefile for firmware loading selftests - -# No binaries, but make sure arg-less "make" doesn't trigger "run_tests" -all: +CFLAGS = -Wall \ + -O2 TEST_PROGS := fw_run_tests.sh TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_lib.sh +TEST_GEN_FILES := fw_namespace include ../lib.mk - -# Nothing to clean up. -clean: diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh index 56894477c8bd..fcc281373b4d 100755 --- a/tools/testing/selftests/firmware/fw_filesystem.sh +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -86,6 +86,29 @@ else fi fi +# Try platform (EFI embedded fw) loading too +if [ ! -e "$DIR"/trigger_request_platform ]; then + echo "$0: firmware loading: platform trigger not present, ignoring test" >&2 +else + if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then + echo "$0: empty filename should not succeed (platform)" >&2 + exit 1 + fi + + # Note we echo a non-existing name, since files on the file-system + # are preferred over firmware embedded inside the platform's firmware + # The test adds a fake entry with the requested name to the platform's + # fw list, so the name does not matter as long as it does not exist + if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then + echo "$0: could not trigger request platform" >&2 + exit 1 + fi + + # The test verifies itself that the loaded firmware contents matches + # the contents for the fake platform fw entry it added. + echo "$0: platform loading works" +fi + ### Batched requests tests test_config_present() { diff --git a/tools/testing/selftests/firmware/fw_namespace.c b/tools/testing/selftests/firmware/fw_namespace.c new file mode 100644 index 000000000000..5ebc1aec7923 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_namespace.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Test triggering of loading of firmware from different mount + * namespaces. Expect firmware to be always loaded from the mount + * namespace of PID 1. */ +#define _GNU_SOURCE +#include <errno.h> +#include <fcntl.h> +#include <sched.h> +#include <stdarg.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mount.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <unistd.h> + +#ifndef CLONE_NEWNS +# define CLONE_NEWNS 0x00020000 +#endif + +static char *fw_path = NULL; + +static void die(char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + vfprintf(stderr, fmt, ap); + va_end(ap); + if (fw_path) + unlink(fw_path); + umount("/lib/firmware"); + exit(EXIT_FAILURE); +} + +static void trigger_fw(const char *fw_name, const char *sys_path) +{ + int fd; + + fd = open(sys_path, O_WRONLY); + if (fd < 0) + die("open failed: %s\n", + strerror(errno)); + if (write(fd, fw_name, strlen(fw_name)) != strlen(fw_name)) + exit(EXIT_FAILURE); + close(fd); +} + +static void setup_fw(const char *fw_path) +{ + int fd; + const char fw[] = "ABCD0123"; + + fd = open(fw_path, O_WRONLY | O_CREAT, 0600); + if (fd < 0) + die("open failed: %s\n", + strerror(errno)); + if (write(fd, fw, sizeof(fw) -1) != sizeof(fw) -1) + die("write failed: %s\n", + strerror(errno)); + close(fd); +} + +static bool test_fw_in_ns(const char *fw_name, const char *sys_path, bool block_fw_in_parent_ns) +{ + pid_t child; + + if (block_fw_in_parent_ns) + if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1) + die("blocking firmware in parent ns failed\n"); + + child = fork(); + if (child == -1) { + die("fork failed: %s\n", + strerror(errno)); + } + if (child != 0) { /* parent */ + pid_t pid; + int status; + + pid = waitpid(child, &status, 0); + if (pid == -1) { + die("waitpid failed: %s\n", + strerror(errno)); + } + if (pid != child) { + die("waited for %d got %d\n", + child, pid); + } + if (!WIFEXITED(status)) { + die("child did not terminate cleanly\n"); + } + if (block_fw_in_parent_ns) + umount("/lib/firmware"); + return WEXITSTATUS(status) == EXIT_SUCCESS ? true : false; + } + + if (unshare(CLONE_NEWNS) != 0) { + die("unshare(CLONE_NEWNS) failed: %s\n", + strerror(errno)); + } + if (mount(NULL, "/", NULL, MS_SLAVE|MS_REC, NULL) == -1) + die("remount root in child ns failed\n"); + + if (!block_fw_in_parent_ns) { + if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1) + die("blocking firmware in child ns failed\n"); + } else + umount("/lib/firmware"); + + trigger_fw(fw_name, sys_path); + + exit(EXIT_SUCCESS); +} + +int main(int argc, char **argv) +{ + const char *fw_name = "test-firmware.bin"; + char *sys_path; + if (argc != 2) + die("usage: %s sys_path\n", argv[0]); + + /* Mount tmpfs to /lib/firmware so we don't have to assume + that it is writable for us.*/ + if (mount("test", "/lib/firmware", "tmpfs", 0, NULL) == -1) + die("mounting tmpfs to /lib/firmware failed\n"); + + sys_path = argv[1]; + asprintf(&fw_path, "/lib/firmware/%s", fw_name); + + setup_fw(fw_path); + + setvbuf(stdout, NULL, _IONBF, 0); + /* Positive case: firmware in PID1 mount namespace */ + printf("Testing with firmware in parent namespace (assumed to be same file system as PID1)\n"); + if (!test_fw_in_ns(fw_name, sys_path, false)) + die("error: failed to access firmware\n"); + + /* Negative case: firmware in child mount namespace, expected to fail */ + printf("Testing with firmware in child namespace\n"); + if (test_fw_in_ns(fw_name, sys_path, true)) + die("error: firmware access did not fail\n"); + + unlink(fw_path); + free(fw_path); + umount("/lib/firmware"); + exit(EXIT_SUCCESS); +} diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh index 8e14d555c197..777377078d5e 100755 --- a/tools/testing/selftests/firmware/fw_run_tests.sh +++ b/tools/testing/selftests/firmware/fw_run_tests.sh @@ -61,6 +61,10 @@ run_test_config_0003() check_mods check_setup +echo "Running namespace test: " +$TEST_DIR/fw_namespace $DIR/trigger_request +echo "OK" + if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then run_test_config_0001 run_test_config_0002 diff --git a/tools/testing/selftests/lkdtm/.gitignore b/tools/testing/selftests/lkdtm/.gitignore new file mode 100644 index 000000000000..f26212605b6b --- /dev/null +++ b/tools/testing/selftests/lkdtm/.gitignore @@ -0,0 +1,2 @@ +*.sh +!run.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 287ae916ec0b..4c1bd03ffa1c 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -11,7 +11,9 @@ TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh -TEST_PROGS += fin_ack_lat.sh +TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh +TEST_PROGS += altnames.sh icmp_redirect.sh ip6_gre_headroom.sh +TEST_PROGS += route_localnet.sh TEST_PROGS_EXTENDED := in_netns.sh TEST_GEN_FILES = socket nettest TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 60273f1bc7d9..b7616704b55e 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -1041,6 +1041,27 @@ ipv6_addr_metric_test() fi log_test $rc 0 "Prefix route with metric on link up" + # verify peer metric added correctly + set -e + run_cmd "$IP -6 addr flush dev dummy2" + run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::1 peer 2001:db8:104::2 metric 260" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on local side" + log_test $? 0 "User specified metric on local address" + check_route6 "2001:db8:104::2 dev dummy2 proto kernel metric 260" + log_test $? 0 "Set metric with peer route on peer side" + + set -e + run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::1 peer 2001:db8:104::3 metric 261" + set +e + + check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on local side" + check_route6 "2001:db8:104::3 dev dummy2 proto kernel metric 261" + log_test $? 0 "Modify metric and peer address on peer side" + $IP li del dummy1 $IP li del dummy2 cleanup @@ -1457,13 +1478,20 @@ ipv4_addr_metric_test() run_cmd "$IP addr flush dev dummy2" run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260" - run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 261" rc=$? if [ $rc -eq 0 ]; then - check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" + check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 260" + rc=$? + fi + log_test $rc 0 "Set metric of address with peer route" + + run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.3 metric 261" + rc=$? + if [ $rc -eq 0 ]; then + check_route "172.16.104.3 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261" rc=$? fi - log_test $rc 0 "Modify metric of address with peer route" + log_test $rc 0 "Modify metric and peer address for peer route" $IP li del dummy1 $IP li del dummy2 diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile new file mode 100644 index 000000000000..250fbb2d1625 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = bridge_igmp.sh \ + bridge_port_isolation.sh \ + bridge_sticky_fdb.sh \ + bridge_vlan_aware.sh \ + bridge_vlan_unaware.sh \ + ethtool.sh \ + gre_inner_v4_multipath.sh \ + gre_inner_v6_multipath.sh \ + gre_multipath.sh \ + ip6gre_inner_v4_multipath.sh \ + ip6gre_inner_v6_multipath.sh \ + ipip_flat_gre_key.sh \ + ipip_flat_gre_keys.sh \ + ipip_flat_gre.sh \ + ipip_hier_gre_key.sh \ + ipip_hier_gre_keys.sh \ + ipip_hier_gre.sh \ + loopback.sh \ + mirror_gre_bound.sh \ + mirror_gre_bridge_1d.sh \ + mirror_gre_bridge_1d_vlan.sh \ + mirror_gre_bridge_1q_lag.sh \ + mirror_gre_bridge_1q.sh \ + mirror_gre_changes.sh \ + mirror_gre_flower.sh \ + mirror_gre_lag_lacp.sh \ + mirror_gre_neigh.sh \ + mirror_gre_nh.sh \ + mirror_gre.sh \ + mirror_gre_vlan_bridge_1q.sh \ + mirror_gre_vlan.sh \ + mirror_vlan.sh \ + router_bridge.sh \ + router_bridge_vlan.sh \ + router_broadcast.sh \ + router_mpath_nh.sh \ + router_multicast.sh \ + router_multipath.sh \ + router.sh \ + router_vid_1.sh \ + sch_ets.sh \ + sch_tbf_ets.sh \ + sch_tbf_prio.sh \ + sch_tbf_root.sh \ + tc_actions.sh \ + tc_chains.sh \ + tc_flower_router.sh \ + tc_flower.sh \ + tc_shblocks.sh \ + tc_vlan_modify.sh \ + vxlan_asymmetric.sh \ + vxlan_bridge_1d_port_8472.sh \ + vxlan_bridge_1d.sh \ + vxlan_bridge_1q_port_8472.sh \ + vxlan_bridge_1q.sh \ + vxlan_symmetric.sh + +TEST_PROGS_EXTENDED := devlink_lib.sh \ + ethtool_lib.sh \ + fib_offload_lib.sh \ + forwarding.config.sample \ + ipip_lib.sh \ + lib.sh \ + mirror_gre_lib.sh \ + mirror_gre_topo_lib.sh \ + mirror_lib.sh \ + mirror_topo_lib.sh \ + sch_ets_core.sh \ + sch_ets_tests.sh \ + sch_tbf_core.sh \ + sch_tbf_etsprio.sh \ + tc_common.sh + +include ../../lib.mk diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/net/forwarding/ethtool_lib.sh index 925d229a59d8..925d229a59d8 100755..100644 --- a/tools/testing/selftests/net/forwarding/ethtool_lib.sh +++ b/tools/testing/selftests/net/forwarding/ethtool_lib.sh diff --git a/tools/testing/selftests/net/reuseport_addr_any.c b/tools/testing/selftests/net/reuseport_addr_any.c index c6233935fed1..b8475cb29be7 100644 --- a/tools/testing/selftests/net/reuseport_addr_any.c +++ b/tools/testing/selftests/net/reuseport_addr_any.c @@ -21,6 +21,10 @@ #include <sys/socket.h> #include <unistd.h> +#ifndef SOL_DCCP +#define SOL_DCCP 269 +#endif + static const char *IP4_ADDR = "127.0.0.1"; static const char *IP6_ADDR = "::1"; static const char *IP4_MAPPED6 = "::ffff:127.0.0.1"; diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index 08194aa44006..9c0f758310fe 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -3,6 +3,10 @@ TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \ conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \ - nft_concat_range.sh + nft_concat_range.sh \ + nft_queue.sh + +LDLIBS = -lmnl +TEST_GEN_FILES = nf-queue include ../lib.mk diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config index 59caa8f71cd8..4faf2ce021d9 100644 --- a/tools/testing/selftests/netfilter/config +++ b/tools/testing/selftests/netfilter/config @@ -1,2 +1,8 @@ CONFIG_NET_NS=y CONFIG_NF_TABLES_INET=y +CONFIG_NFT_QUEUE=m +CONFIG_NFT_NAT=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_FLOW_OFFLOAD=m +CONFIG_NF_CT_NETLINK=m diff --git a/tools/testing/selftests/netfilter/nf-queue.c b/tools/testing/selftests/netfilter/nf-queue.c new file mode 100644 index 000000000000..29c73bce38fa --- /dev/null +++ b/tools/testing/selftests/netfilter/nf-queue.c @@ -0,0 +1,352 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <errno.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> +#include <time.h> +#include <arpa/inet.h> + +#include <libmnl/libmnl.h> +#include <linux/netfilter.h> +#include <linux/netfilter/nfnetlink.h> +#include <linux/netfilter/nfnetlink_queue.h> + +struct options { + bool count_packets; + int verbose; + unsigned int queue_num; + unsigned int timeout; +}; + +static unsigned int queue_stats[5]; +static struct options opts; + +static void help(const char *p) +{ + printf("Usage: %s [-c|-v [-vv] ] [-t timeout] [-q queue_num]\n", p); +} + +static int parse_attr_cb(const struct nlattr *attr, void *data) +{ + const struct nlattr **tb = data; + int type = mnl_attr_get_type(attr); + + /* skip unsupported attribute in user-space */ + if (mnl_attr_type_valid(attr, NFQA_MAX) < 0) + return MNL_CB_OK; + + switch (type) { + case NFQA_MARK: + case NFQA_IFINDEX_INDEV: + case NFQA_IFINDEX_OUTDEV: + case NFQA_IFINDEX_PHYSINDEV: + case NFQA_IFINDEX_PHYSOUTDEV: + if (mnl_attr_validate(attr, MNL_TYPE_U32) < 0) { + perror("mnl_attr_validate"); + return MNL_CB_ERROR; + } + break; + case NFQA_TIMESTAMP: + if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC, + sizeof(struct nfqnl_msg_packet_timestamp)) < 0) { + perror("mnl_attr_validate2"); + return MNL_CB_ERROR; + } + break; + case NFQA_HWADDR: + if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC, + sizeof(struct nfqnl_msg_packet_hw)) < 0) { + perror("mnl_attr_validate2"); + return MNL_CB_ERROR; + } + break; + case NFQA_PAYLOAD: + break; + } + tb[type] = attr; + return MNL_CB_OK; +} + +static int queue_cb(const struct nlmsghdr *nlh, void *data) +{ + struct nlattr *tb[NFQA_MAX+1] = { 0 }; + struct nfqnl_msg_packet_hdr *ph = NULL; + uint32_t id = 0; + + (void)data; + + mnl_attr_parse(nlh, sizeof(struct nfgenmsg), parse_attr_cb, tb); + if (tb[NFQA_PACKET_HDR]) { + ph = mnl_attr_get_payload(tb[NFQA_PACKET_HDR]); + id = ntohl(ph->packet_id); + + if (opts.verbose > 0) + printf("packet hook=%u, hwproto 0x%x", + ntohs(ph->hw_protocol), ph->hook); + + if (ph->hook >= 5) { + fprintf(stderr, "Unknown hook %d\n", ph->hook); + return MNL_CB_ERROR; + } + + if (opts.verbose > 0) { + uint32_t skbinfo = 0; + + if (tb[NFQA_SKB_INFO]) + skbinfo = ntohl(mnl_attr_get_u32(tb[NFQA_SKB_INFO])); + if (skbinfo & NFQA_SKB_CSUMNOTREADY) + printf(" csumnotready"); + if (skbinfo & NFQA_SKB_GSO) + printf(" gso"); + if (skbinfo & NFQA_SKB_CSUM_NOTVERIFIED) + printf(" csumnotverified"); + puts(""); + } + + if (opts.count_packets) + queue_stats[ph->hook]++; + } + + return MNL_CB_OK + id; +} + +static struct nlmsghdr * +nfq_build_cfg_request(char *buf, uint8_t command, int queue_num) +{ + struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf); + struct nfqnl_msg_config_cmd cmd = { + .command = command, + .pf = htons(AF_INET), + }; + struct nfgenmsg *nfg; + + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG; + nlh->nlmsg_flags = NLM_F_REQUEST; + + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_CFG_CMD, sizeof(cmd), &cmd); + + return nlh; +} + +static struct nlmsghdr * +nfq_build_cfg_params(char *buf, uint8_t mode, int range, int queue_num) +{ + struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf); + struct nfqnl_msg_config_params params = { + .copy_range = htonl(range), + .copy_mode = mode, + }; + struct nfgenmsg *nfg; + + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG; + nlh->nlmsg_flags = NLM_F_REQUEST; + + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_CFG_PARAMS, sizeof(params), ¶ms); + + return nlh; +} + +static struct nlmsghdr * +nfq_build_verdict(char *buf, int id, int queue_num, int verd) +{ + struct nfqnl_msg_verdict_hdr vh = { + .verdict = htonl(verd), + .id = htonl(id), + }; + struct nlmsghdr *nlh; + struct nfgenmsg *nfg; + + nlh = mnl_nlmsg_put_header(buf); + nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_VERDICT; + nlh->nlmsg_flags = NLM_F_REQUEST; + nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg)); + nfg->nfgen_family = AF_UNSPEC; + nfg->version = NFNETLINK_V0; + nfg->res_id = htons(queue_num); + + mnl_attr_put(nlh, NFQA_VERDICT_HDR, sizeof(vh), &vh); + + return nlh; +} + +static void print_stats(void) +{ + unsigned int last, total; + int i; + + if (!opts.count_packets) + return; + + total = 0; + last = queue_stats[0]; + + for (i = 0; i < 5; i++) { + printf("hook %d packets %08u\n", i, queue_stats[i]); + last = queue_stats[i]; + total += last; + } + + printf("%u packets total\n", total); +} + +struct mnl_socket *open_queue(void) +{ + char buf[MNL_SOCKET_BUFFER_SIZE]; + unsigned int queue_num; + struct mnl_socket *nl; + struct nlmsghdr *nlh; + struct timeval tv; + uint32_t flags; + + nl = mnl_socket_open(NETLINK_NETFILTER); + if (nl == NULL) { + perror("mnl_socket_open"); + exit(EXIT_FAILURE); + } + + if (mnl_socket_bind(nl, 0, MNL_SOCKET_AUTOPID) < 0) { + perror("mnl_socket_bind"); + exit(EXIT_FAILURE); + } + + queue_num = opts.queue_num; + nlh = nfq_build_cfg_request(buf, NFQNL_CFG_CMD_BIND, queue_num); + + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + + nlh = nfq_build_cfg_params(buf, NFQNL_COPY_PACKET, 0xFFFF, queue_num); + + flags = NFQA_CFG_F_GSO | NFQA_CFG_F_UID_GID; + mnl_attr_put_u32(nlh, NFQA_CFG_FLAGS, htonl(flags)); + mnl_attr_put_u32(nlh, NFQA_CFG_MASK, htonl(flags)); + + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + + memset(&tv, 0, sizeof(tv)); + tv.tv_sec = opts.timeout; + if (opts.timeout && setsockopt(mnl_socket_get_fd(nl), + SOL_SOCKET, SO_RCVTIMEO, + &tv, sizeof(tv))) { + perror("setsockopt(SO_RCVTIMEO)"); + exit(EXIT_FAILURE); + } + + return nl; +} + +static int mainloop(void) +{ + unsigned int buflen = 64 * 1024 + MNL_SOCKET_BUFFER_SIZE; + struct mnl_socket *nl; + struct nlmsghdr *nlh; + unsigned int portid; + char *buf; + int ret; + + buf = malloc(buflen); + if (!buf) { + perror("malloc"); + exit(EXIT_FAILURE); + } + + nl = open_queue(); + portid = mnl_socket_get_portid(nl); + + for (;;) { + uint32_t id; + + ret = mnl_socket_recvfrom(nl, buf, buflen); + if (ret == -1) { + if (errno == ENOBUFS) + continue; + + if (errno == EAGAIN) { + errno = 0; + ret = 0; + break; + } + + perror("mnl_socket_recvfrom"); + exit(EXIT_FAILURE); + } + + ret = mnl_cb_run(buf, ret, 0, portid, queue_cb, NULL); + if (ret < 0) { + perror("mnl_cb_run"); + exit(EXIT_FAILURE); + } + + id = ret - MNL_CB_OK; + nlh = nfq_build_verdict(buf, id, opts.queue_num, NF_ACCEPT); + if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) { + perror("mnl_socket_sendto"); + exit(EXIT_FAILURE); + } + } + + mnl_socket_close(nl); + + return ret; +} + +static void parse_opts(int argc, char **argv) +{ + int c; + + while ((c = getopt(argc, argv, "chvt:q:")) != -1) { + switch (c) { + case 'c': + opts.count_packets = true; + break; + case 'h': + help(argv[0]); + exit(0); + break; + case 'q': + opts.queue_num = atoi(optarg); + if (opts.queue_num > 0xffff) + opts.queue_num = 0; + break; + case 't': + opts.timeout = atoi(optarg); + break; + case 'v': + opts.verbose++; + break; + } + } +} + +int main(int argc, char *argv[]) +{ + int ret; + + parse_opts(argc, argv); + + ret = mainloop(); + if (opts.count_packets) + print_stats(); + + return ret; +} diff --git a/tools/testing/selftests/netfilter/nft_queue.sh b/tools/testing/selftests/netfilter/nft_queue.sh new file mode 100755 index 000000000000..6898448b4266 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_queue.sh @@ -0,0 +1,332 @@ +#!/bin/bash +# +# This tests nf_queue: +# 1. can process packets from all hooks +# 2. support running nfqueue from more than one base chain +# +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +nsrouter="nsrouter-$sfx" + +cleanup() +{ + ip netns del ${ns1} + ip netns del ${ns2} + ip netns del ${nsrouter} + rm -f "$TMPFILE0" + rm -f "$TMPFILE1" +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ${nsrouter} +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace" + exit $ksft_skip +fi + +TMPFILE0=$(mktemp) +TMPFILE1=$(mktemp) +trap cleanup EXIT + +ip netns add ${ns1} +ip netns add ${ns2} + +ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip +fi +ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2} + +ip -net ${nsrouter} link set lo up +ip -net ${nsrouter} link set veth0 up +ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0 +ip -net ${nsrouter} addr add dead:1::1/64 dev veth0 + +ip -net ${nsrouter} link set veth1 up +ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1 +ip -net ${nsrouter} addr add dead:2::1/64 dev veth1 + +ip -net ${ns1} link set lo up +ip -net ${ns1} link set eth0 up + +ip -net ${ns2} link set lo up +ip -net ${ns2} link set eth0 up + +ip -net ${ns1} addr add 10.0.1.99/24 dev eth0 +ip -net ${ns1} addr add dead:1::99/64 dev eth0 +ip -net ${ns1} route add default via 10.0.1.1 +ip -net ${ns1} route add default via dead:1::1 + +ip -net ${ns2} addr add 10.0.2.99/24 dev eth0 +ip -net ${ns2} addr add dead:2::99/64 dev eth0 +ip -net ${ns2} route add default via 10.0.2.1 +ip -net ${ns2} route add default via dead:2::1 + +load_ruleset() { + local name=$1 + local prio=$2 + +ip netns exec ${nsrouter} nft -f - <<EOF +table inet $name { + chain nfq { + ip protocol icmp queue bypass + icmpv6 type { "echo-request", "echo-reply" } queue num 1 bypass + } + chain pre { + type filter hook prerouting priority $prio; policy accept; + jump nfq + } + chain input { + type filter hook input priority $prio; policy accept; + jump nfq + } + chain forward { + type filter hook forward priority $prio; policy accept; + tcp dport 12345 queue num 2 + jump nfq + } + chain output { + type filter hook output priority $prio; policy accept; + tcp dport 12345 queue num 3 + jump nfq + } + chain post { + type filter hook postrouting priority $prio; policy accept; + jump nfq + } +} +EOF +} + +load_counter_ruleset() { + local prio=$1 + +ip netns exec ${nsrouter} nft -f - <<EOF +table inet countrules { + chain pre { + type filter hook prerouting priority $prio; policy accept; + counter + } + chain input { + type filter hook input priority $prio; policy accept; + counter + } + chain forward { + type filter hook forward priority $prio; policy accept; + counter + } + chain output { + type filter hook output priority $prio; policy accept; + counter + } + chain post { + type filter hook postrouting priority $prio; policy accept; + counter + } +} +EOF +} + +test_ping() { + ip netns exec ${ns1} ping -c 1 -q 10.0.2.99 > /dev/null + if [ $? -ne 0 ];then + return 1 + fi + + ip netns exec ${ns1} ping -c 1 -q dead:2::99 > /dev/null + if [ $? -ne 0 ];then + return 1 + fi + + return 0 +} + +test_ping_router() { + ip netns exec ${ns1} ping -c 1 -q 10.0.2.1 > /dev/null + if [ $? -ne 0 ];then + return 1 + fi + + ip netns exec ${ns1} ping -c 1 -q dead:2::1 > /dev/null + if [ $? -ne 0 ];then + return 1 + fi + + return 0 +} + +test_queue_blackhole() { + local proto=$1 + +ip netns exec ${nsrouter} nft -f - <<EOF +table $proto blackh { + chain forward { + type filter hook forward priority 0; policy accept; + queue num 600 + } +} +EOF + if [ $proto = "ip" ] ;then + ip netns exec ${ns1} ping -c 1 -q 10.0.2.99 > /dev/null + lret=$? + elif [ $proto = "ip6" ]; then + ip netns exec ${ns1} ping -c 1 -q dead:2::99 > /dev/null + lret=$? + else + lret=111 + fi + + # queue without bypass keyword should drop traffic if no listener exists. + if [ $lret -eq 0 ];then + echo "FAIL: $proto expected failure, got $lret" 1>&2 + exit 1 + fi + + ip netns exec ${nsrouter} nft delete table $proto blackh + if [ $? -ne 0 ] ;then + echo "FAIL: $proto: Could not delete blackh table" + exit 1 + fi + + echo "PASS: $proto: statement with no listener results in packet drop" +} + +test_queue() +{ + local expected=$1 + local last="" + + # spawn nf-queue listeners + ip netns exec ${nsrouter} ./nf-queue -c -q 0 -t 3 > "$TMPFILE0" & + ip netns exec ${nsrouter} ./nf-queue -c -q 1 -t 3 > "$TMPFILE1" & + sleep 1 + test_ping + ret=$? + if [ $ret -ne 0 ];then + echo "FAIL: netns routing/connectivity with active listener on queue $queue: $ret" 1>&2 + exit $ret + fi + + test_ping_router + ret=$? + if [ $ret -ne 0 ];then + echo "FAIL: netns router unreachable listener on queue $queue: $ret" 1>&2 + exit $ret + fi + + wait + ret=$? + + for file in $TMPFILE0 $TMPFILE1; do + last=$(tail -n1 "$file") + if [ x"$last" != x"$expected packets total" ]; then + echo "FAIL: Expected $expected packets total, but got $last" 1>&2 + cat "$file" 1>&2 + + ip netns exec ${nsrouter} nft list ruleset + exit 1 + fi + done + + echo "PASS: Expected and received $last" +} + +test_tcp_forward() +{ + ip netns exec ${nsrouter} ./nf-queue -q 2 -t 10 & + local nfqpid=$! + + tmpfile=$(mktemp) || exit 1 + dd conv=sparse status=none if=/dev/zero bs=1M count=100 of=$tmpfile + ip netns exec ${ns2} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null & + local rpid=$! + + sleep 1 + ip netns exec ${ns1} nc -w 5 10.0.2.99 12345 <"$tmpfile" >/dev/null & + + rm -f "$tmpfile" + + wait $rpid + wait $lpid + [ $? -eq 0 ] && echo "PASS: tcp and nfqueue in forward chain" +} + +test_tcp_localhost() +{ + tc -net "${nsrouter}" qdisc add dev lo root netem loss random 1% + + tmpfile=$(mktemp) || exit 1 + + dd conv=sparse status=none if=/dev/zero bs=1M count=900 of=$tmpfile + ip netns exec ${nsrouter} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null & + local rpid=$! + + ip netns exec ${nsrouter} ./nf-queue -q 3 -t 30 & + local nfqpid=$! + + sleep 1 + ip netns exec ${nsrouter} nc -w 5 127.0.0.1 12345 <"$tmpfile" > /dev/null + rm -f "$tmpfile" + + wait $rpid + [ $? -eq 0 ] && echo "PASS: tcp via loopback" +} + +ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null +ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + +load_ruleset "filter" 0 + +sleep 3 + +test_ping +ret=$? +if [ $ret -eq 0 ];then + # queue bypass works (rules were skipped, no listener) + echo "PASS: ${ns1} can reach ${ns2}" +else + echo "FAIL: ${ns1} cannot reach ${ns2}: $ret" 1>&2 + exit $ret +fi + +test_queue_blackhole ip +test_queue_blackhole ip6 + +# dummy ruleset to add base chains between the +# queueing rules. We don't want the second reinject +# to re-execute the old hooks. +load_counter_ruleset 10 + +# we are hooking all: prerouting/input/forward/output/postrouting. +# we ping ${ns2} from ${ns1} via ${nsrouter} using ipv4 and ipv6, so: +# 1x icmp prerouting,forward,postrouting -> 3 queue events (6 incl. reply). +# 1x icmp prerouting,input,output postrouting -> 4 queue events incl. reply. +# so we expect that userspace program receives 10 packets. +test_queue 10 + +# same. We queue to a second program as well. +load_ruleset "filter2" 20 +test_queue 20 + +test_tcp_forward +test_tcp_localhost + +exit $ret diff --git a/tools/testing/selftests/pidfd/.gitignore b/tools/testing/selftests/pidfd/.gitignore index 3a779c084d96..39559d723c41 100644 --- a/tools/testing/selftests/pidfd/.gitignore +++ b/tools/testing/selftests/pidfd/.gitignore @@ -2,4 +2,5 @@ pidfd_open_test pidfd_poll_test pidfd_test pidfd_wait +pidfd_fdinfo_test pidfd_getfd_test diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh index c3a49fb4d6f6..12810229fddc 100644 --- a/tools/testing/selftests/rcutorture/bin/functions.sh +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -12,7 +12,7 @@ # Returns 1 if the specified boot-parameter string tells rcutorture to # test CPU-hotplug operations. bootparam_hotplug_cpu () { - echo "$1" | grep -q "rcutorture\.onoff_" + echo "$1" | grep -q "torture\.onoff_" } # checkarg --argname argtype $# arg mustmatch cannotmatch diff --git a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh index 1871d00bccd7..6f50722f251f 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh @@ -20,7 +20,9 @@ rundir="${1}" if test -z "$rundir" -o ! -d "$rundir" then + echo Directory "$rundir" not found. echo Usage: $0 directory + exit 1 fi editor=${EDITOR-vi} diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index e5edd5198725..0326f4a5ff9c 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -13,6 +13,9 @@ # # Authors: Paul E. McKenney <paulmck@linux.ibm.com> +T=/tmp/kvm-recheck.sh.$$ +trap 'rm -f $T' 0 2 + PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH . functions.sh for rd in "$@" @@ -68,4 +71,16 @@ do fi done done -EDITOR=echo kvm-find-errors.sh "${@: -1}" > /dev/null 2>&1 +EDITOR=echo kvm-find-errors.sh "${@: -1}" > $T 2>&1 +ret=$? +builderrors="`tr ' ' '\012' < $T | grep -c '/Make.out.diags'`" +if test "$builderrors" -gt 0 +then + echo $builderrors runs with build errors. +fi +runerrors="`tr ' ' '\012' < $T | grep -c '/console.log.diags'`" +if test "$runerrors" -gt 0 +then + echo $runerrors runs with runtime errors. +fi +exit $ret diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 78d18ab8e954..2315e2ec12d6 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -39,7 +39,7 @@ TORTURE_TRUST_MAKE="" resdir="" configs="" cpus=0 -ds=`date +%Y.%m.%d-%H:%M:%S` +ds=`date +%Y.%m.%d-%H.%M.%S` jitter="-1" usage () { diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon index e19a444a0684..0e92d85313aa 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon @@ -3,3 +3,5 @@ CONFIG_PRINTK_TIME=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y CONFIG_KVM_GUEST=y +CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n +CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE10 b/tools/testing/selftests/rcutorture/configs/rcu/TREE10 new file mode 100644 index 000000000000..2debe7891aeb --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE10 @@ -0,0 +1,18 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=100 +CONFIG_PREEMPT_NONE=y +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=n +#CHECK#CONFIG_TREE_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=n +CONFIG_PROVE_LOCKING=n +#CHECK#CONFIG_PROVE_RCU=n +CONFIG_DEBUG_OBJECTS=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n +CONFIG_RCU_EXPERT=n diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index ee1b727ede04..a9ad3bd8b2ad 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -212,6 +212,10 @@ struct seccomp_notif_sizes { #define SECCOMP_USER_NOTIF_FLAG_CONTINUE 0x00000001 #endif +#ifndef SECCOMP_FILTER_FLAG_TSYNC_ESRCH +#define SECCOMP_FILTER_FLAG_TSYNC_ESRCH (1UL << 4) +#endif + #ifndef seccomp int seccomp(unsigned int op, unsigned int flags, void *args) { @@ -2187,7 +2191,8 @@ TEST(detect_seccomp_filter_flags) unsigned int flags[] = { SECCOMP_FILTER_FLAG_TSYNC, SECCOMP_FILTER_FLAG_LOG, SECCOMP_FILTER_FLAG_SPEC_ALLOW, - SECCOMP_FILTER_FLAG_NEW_LISTENER }; + SECCOMP_FILTER_FLAG_NEW_LISTENER, + SECCOMP_FILTER_FLAG_TSYNC_ESRCH }; unsigned int exclusive[] = { SECCOMP_FILTER_FLAG_TSYNC, SECCOMP_FILTER_FLAG_NEW_LISTENER }; @@ -2645,6 +2650,55 @@ TEST_F(TSYNC, two_siblings_with_one_divergence) EXPECT_EQ(SIBLING_EXIT_UNKILLED, (long)status); } +TEST_F(TSYNC, two_siblings_with_one_divergence_no_tid_in_err) +{ + long ret, flags; + void *status; + + ASSERT_EQ(0, prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0)) { + TH_LOG("Kernel does not support PR_SET_NO_NEW_PRIVS!"); + } + + ret = seccomp(SECCOMP_SET_MODE_FILTER, 0, &self->root_prog); + ASSERT_NE(ENOSYS, errno) { + TH_LOG("Kernel does not support seccomp syscall!"); + } + ASSERT_EQ(0, ret) { + TH_LOG("Kernel does not support SECCOMP_SET_MODE_FILTER!"); + } + self->sibling[0].diverge = 1; + tsync_start_sibling(&self->sibling[0]); + tsync_start_sibling(&self->sibling[1]); + + while (self->sibling_count < TSYNC_SIBLINGS) { + sem_wait(&self->started); + self->sibling_count++; + } + + flags = SECCOMP_FILTER_FLAG_TSYNC | \ + SECCOMP_FILTER_FLAG_TSYNC_ESRCH; + ret = seccomp(SECCOMP_SET_MODE_FILTER, flags, &self->apply_prog); + ASSERT_EQ(ESRCH, errno) { + TH_LOG("Did not return ESRCH for diverged sibling."); + } + ASSERT_EQ(-1, ret) { + TH_LOG("Did not fail on diverged sibling."); + } + + /* Wake the threads */ + pthread_mutex_lock(&self->mutex); + ASSERT_EQ(0, pthread_cond_broadcast(&self->cond)) { + TH_LOG("cond broadcast non-zero"); + } + pthread_mutex_unlock(&self->mutex); + + /* Ensure they are both unkilled. */ + PTHREAD_JOIN(self->sibling[0].tid, &status); + EXPECT_EQ(SIBLING_EXIT_UNKILLED, (long)status); + PTHREAD_JOIN(self->sibling[1].tid, &status); + EXPECT_EQ(SIBLING_EXIT_UNKILLED, (long)status); +} + TEST_F(TSYNC, two_siblings_not_under_filter) { long ret, sib; @@ -3196,6 +3250,24 @@ TEST(user_notification_basic) EXPECT_EQ(0, WEXITSTATUS(status)); } +TEST(user_notification_with_tsync) +{ + int ret; + unsigned int flags; + + /* these were exclusive */ + flags = SECCOMP_FILTER_FLAG_NEW_LISTENER | + SECCOMP_FILTER_FLAG_TSYNC; + ASSERT_EQ(-1, user_trap_syscall(__NR_getppid, flags)); + ASSERT_EQ(EINVAL, errno); + + /* but now they're not */ + flags |= SECCOMP_FILTER_FLAG_TSYNC_ESRCH; + ret = user_trap_syscall(__NR_getppid, flags); + close(ret); + ASSERT_LE(0, ret); +} + TEST(user_notification_kill_in_middle) { pid_t pid; diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config index 477bc61b374a..c03af4600281 100644 --- a/tools/testing/selftests/tc-testing/config +++ b/tools/testing/selftests/tc-testing/config @@ -57,3 +57,4 @@ CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m CONFIG_NET_SCH_FIFO=y +CONFIG_NET_SCH_ETS=m diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh index 138d46b3f330..936e1ca9410e 100755 --- a/tools/testing/selftests/wireguard/netns.sh +++ b/tools/testing/selftests/wireguard/netns.sh @@ -527,11 +527,16 @@ n0 wg set wg0 peer "$pub2" allowed-ips 0.0.0.0/0 n0 wg set wg0 peer "$pub2" allowed-ips ::/0,1700::/111,5000::/4,e000::/37,9000::/75 n0 wg set wg0 peer "$pub2" allowed-ips ::/0 n0 wg set wg0 peer "$pub2" remove -low_order_points=( AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= 4Ot6fDtBuK4WVuP68Z/EatoJjeucMrH9hmIFFl9JuAA= X5yVvKNQjCSx0LFVnIPvWwREXMRYHI6G2CJO3dCfEVc= 7P///////////////////////////////////////38= 7f///////////////////////////////////////38= 7v///////////////////////////////////////38= ) -n0 wg set wg0 private-key /dev/null ${low_order_points[@]/#/peer } -[[ -z $(n0 wg show wg0 peers) ]] -n0 wg set wg0 private-key <(echo "$key1") ${low_order_points[@]/#/peer } -[[ -z $(n0 wg show wg0 peers) ]] +for low_order_point in AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= 4Ot6fDtBuK4WVuP68Z/EatoJjeucMrH9hmIFFl9JuAA= X5yVvKNQjCSx0LFVnIPvWwREXMRYHI6G2CJO3dCfEVc= 7P///////////////////////////////////////38= 7f///////////////////////////////////////38= 7v///////////////////////////////////////38=; do + n0 wg set wg0 peer "$low_order_point" persistent-keepalive 1 endpoint 127.0.0.1:1111 +done +[[ -n $(n0 wg show wg0 peers) ]] +exec 4< <(n0 ncat -l -u -p 1111) +ncat_pid=$! +waitncatudp $netns0 $ncat_pid +ip0 link set wg0 up +! read -r -n 1 -t 2 <&4 || false +kill $ncat_pid ip0 link del wg0 declare -A objects diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile index 28d477683e8a..90598a425c18 100644 --- a/tools/testing/selftests/wireguard/qemu/Makefile +++ b/tools/testing/selftests/wireguard/qemu/Makefile @@ -41,7 +41,7 @@ $(DISTFILES_PATH)/$(1): flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if echo "$(3) $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi' endef -$(eval $(call tar_download,MUSL,musl,1.1.24,.tar.gz,https://www.musl-libc.org/releases/,1370c9a812b2cf2a7d92802510cca0058cc37e66a7bedd70051f0a34015022a3)) +$(eval $(call tar_download,MUSL,musl,1.2.0,.tar.gz,https://musl.libc.org/releases/,c6de7b191139142d3f9a7b5b702c9cae1b5ee6e7f57e582da9328629408fd4e8)) $(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c)) $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d)) $(eval $(call tar_download,IPROUTE2,iproute2,5.4.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,fe97aa60a0d4c5ac830be18937e18dc3400ca713a33a89ad896ff1e3d46086ae)) diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c index 90bc9813cadc..c9698120ac9d 100644 --- a/tools/testing/selftests/wireguard/qemu/init.c +++ b/tools/testing/selftests/wireguard/qemu/init.c @@ -13,7 +13,6 @@ #include <fcntl.h> #include <sys/wait.h> #include <sys/mount.h> -#include <sys/types.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/io.h> diff --git a/tools/testing/selftests/wireguard/qemu/kernel.config b/tools/testing/selftests/wireguard/qemu/kernel.config index af9323a0b6e0..d531de13c95b 100644 --- a/tools/testing/selftests/wireguard/qemu/kernel.config +++ b/tools/testing/selftests/wireguard/qemu/kernel.config @@ -56,7 +56,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n CONFIG_HZ_PERIODIC=n CONFIG_HIGH_RES_TIMERS=y -CONFIG_COMPAT_32BIT_TIME=y CONFIG_ARCH_RANDOM=y CONFIG_FILE_LOCKING=y CONFIG_POSIX_TIMERS=y diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c index 6f22238f3217..12aaa063196e 100644 --- a/tools/testing/selftests/x86/ptrace_syscall.c +++ b/tools/testing/selftests/x86/ptrace_syscall.c @@ -414,8 +414,12 @@ int main() #if defined(__i386__) && (!defined(__GLIBC__) || __GLIBC__ > 2 || __GLIBC_MINOR__ >= 16) vsyscall32 = (void *)getauxval(AT_SYSINFO); - printf("[RUN]\tCheck AT_SYSINFO return regs\n"); - test_sys32_regs(do_full_vsyscall32); + if (vsyscall32) { + printf("[RUN]\tCheck AT_SYSINFO return regs\n"); + test_sys32_regs(do_full_vsyscall32); + } else { + printf("[SKIP]\tAT_SYSINFO is not available\n"); + } #endif test_ptrace_syscall_restart(); diff --git a/tools/testing/selftests/x86/test_vdso.c b/tools/testing/selftests/x86/test_vdso.c index 35edd61d1663..42052db0f870 100644 --- a/tools/testing/selftests/x86/test_vdso.c +++ b/tools/testing/selftests/x86/test_vdso.c @@ -259,6 +259,11 @@ static void test_one_clock_gettime(int clock, const char *name) static void test_clock_gettime(void) { + if (!vdso_clock_gettime) { + printf("[SKIP]\tNo vDSO, so skipping clock_gettime() tests\n"); + return; + } + for (int clock = 0; clock < sizeof(clocknames) / sizeof(clocknames[0]); clock++) { test_one_clock_gettime(clock, clocknames[clock]); diff --git a/tools/testing/selftests/x86/vdso_restorer.c b/tools/testing/selftests/x86/vdso_restorer.c index 29a5c94c4b50..fe99f2434155 100644 --- a/tools/testing/selftests/x86/vdso_restorer.c +++ b/tools/testing/selftests/x86/vdso_restorer.c @@ -15,6 +15,7 @@ #include <err.h> #include <stdio.h> +#include <dlfcn.h> #include <string.h> #include <signal.h> #include <unistd.h> @@ -46,11 +47,23 @@ int main() int nerrs = 0; struct real_sigaction sa; + void *vdso = dlopen("linux-vdso.so.1", + RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD); + if (!vdso) + vdso = dlopen("linux-gate.so.1", + RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD); + if (!vdso) { + printf("[SKIP]\tFailed to find vDSO. Tests are not expected to work.\n"); + return 0; + } + memset(&sa, 0, sizeof(sa)); sa.handler = handler_with_siginfo; sa.flags = SA_SIGINFO; sa.restorer = NULL; /* request kernel-provided restorer */ + printf("[RUN]\tRaise a signal, SA_SIGINFO, sa.restorer == NULL\n"); + if (syscall(SYS_rt_sigaction, SIGUSR1, &sa, NULL, 8) != 0) err(1, "raw rt_sigaction syscall"); @@ -63,6 +76,8 @@ int main() nerrs++; } + printf("[RUN]\tRaise a signal, !SA_SIGINFO, sa.restorer == NULL\n"); + sa.flags = 0; sa.handler = handler_without_siginfo; if (syscall(SYS_sigaction, SIGUSR1, &sa, 0) != 0) |