summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rw-r--r--tools/iio/Makefile16
-rw-r--r--tools/iio/generic_buffer.c359
-rw-r--r--tools/iio/iio_event_monitor.c308
-rw-r--r--tools/iio/iio_utils.c669
-rw-r--r--tools/iio/iio_utils.h71
-rw-r--r--tools/iio/lsiio.c158
-rw-r--r--tools/lib/traceevent/event-parse.c2
-rw-r--r--tools/perf/bench/mem-memcpy-x86-64-asm-def.h6
-rw-r--r--tools/perf/bench/mem-memcpy-x86-64-asm.S2
-rw-r--r--tools/perf/bench/mem-memcpy.c128
-rw-r--r--tools/perf/bench/mem-memset-x86-64-asm-def.h6
-rw-r--r--tools/perf/bench/mem-memset-x86-64-asm.S2
-rw-r--r--tools/perf/util/include/asm/alternative-asm.h1
-rw-r--r--tools/perf/util/probe-finder.c2
-rw-r--r--tools/testing/selftests/Makefile34
-rw-r--r--tools/testing/selftests/breakpoints/Makefile5
-rw-r--r--tools/testing/selftests/cpu-hotplug/Makefile7
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh (renamed from tools/testing/selftests/cpu-hotplug/on-off-test.sh)0
-rw-r--r--tools/testing/selftests/efivarfs/Makefile7
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/efivarfs/efivarfs.sh0
-rw-r--r--tools/testing/selftests/exec/Makefile9
-rw-r--r--tools/testing/selftests/firmware/Makefile20
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/firmware/fw_filesystem.sh0
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/firmware/fw_userhelper.sh0
-rw-r--r--tools/testing/selftests/ftrace/Makefile5
-rw-r--r--tools/testing/selftests/ftrace/test.d/00basic/basic4.tc2
-rw-r--r--tools/testing/selftests/ftrace/test.d/event/event-enable.tc15
-rw-r--r--tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc15
-rw-r--r--tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc15
-rw-r--r--tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc6
-rw-r--r--tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc2
-rw-r--r--tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc2
-rwxr-xr-xtools/testing/selftests/gen_kselftest_tar.sh55
-rw-r--r--tools/testing/selftests/ipc/Makefile11
-rw-r--r--tools/testing/selftests/kcmp/Makefile6
-rwxr-xr-xtools/testing/selftests/kselftest_install.sh37
-rw-r--r--tools/testing/selftests/lib.mk35
-rw-r--r--tools/testing/selftests/memfd/Makefile14
-rw-r--r--tools/testing/selftests/memory-hotplug/Makefile9
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/memory-hotplug/mem-on-off-test.sh (renamed from tools/testing/selftests/memory-hotplug/on-off-test.sh)0
-rw-r--r--tools/testing/selftests/mount/.gitignore1
-rw-r--r--tools/testing/selftests/mount/Makefile15
-rw-r--r--tools/testing/selftests/mqueue/Makefile22
-rw-r--r--tools/testing/selftests/net/Makefile10
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/net/run_afpackettests0
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/net/run_netsocktests0
-rw-r--r--tools/testing/selftests/powerpc/Makefile22
-rw-r--r--tools/testing/selftests/powerpc/copyloops/Makefile15
-rw-r--r--tools/testing/selftests/powerpc/mm/Makefile15
-rw-r--r--tools/testing/selftests/powerpc/pmu/Makefile48
-rw-r--r--tools/testing/selftests/powerpc/pmu/ebb/Makefile13
-rw-r--r--tools/testing/selftests/powerpc/primitives/Makefile15
-rw-r--r--tools/testing/selftests/powerpc/stringloops/Makefile15
-rw-r--r--tools/testing/selftests/powerpc/tm/Makefile15
-rw-r--r--tools/testing/selftests/ptrace/Makefile5
-rw-r--r--tools/testing/selftests/size/Makefile7
-rw-r--r--tools/testing/selftests/sysctl/Makefile12
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/sysctl/run_numerictests0
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/sysctl/run_stringtests0
-rw-r--r--tools/testing/selftests/timers/Makefile38
-rw-r--r--tools/testing/selftests/timers/alarmtimer-suspend.c185
-rw-r--r--tools/testing/selftests/timers/change_skew.c107
-rw-r--r--tools/testing/selftests/timers/clocksource-switch.c179
-rw-r--r--tools/testing/selftests/timers/inconsistency-check.c204
-rw-r--r--tools/testing/selftests/timers/leap-a-day.c319
-rw-r--r--tools/testing/selftests/timers/leapcrash.c120
-rw-r--r--tools/testing/selftests/timers/mqueue-lat.c124
-rw-r--r--tools/testing/selftests/timers/nanosleep.c174
-rw-r--r--tools/testing/selftests/timers/nsleep-lat.c190
-rw-r--r--tools/testing/selftests/timers/posix_timers.c9
-rw-r--r--tools/testing/selftests/timers/raw_skew.c154
-rw-r--r--tools/testing/selftests/timers/rtctest.c271
-rw-r--r--tools/testing/selftests/timers/set-2038.c144
-rw-r--r--tools/testing/selftests/timers/set-tai.c79
-rw-r--r--tools/testing/selftests/timers/set-timer-lat.c216
-rw-r--r--tools/testing/selftests/timers/skew_consistency.c89
-rw-r--r--tools/testing/selftests/timers/threadtest.c204
-rw-r--r--tools/testing/selftests/timers/valid-adjtimex.c202
-rw-r--r--tools/testing/selftests/user/Makefile5
-rw-r--r--tools/testing/selftests/vm/Makefile7
-rwxr-xr-x[-rw-r--r--]tools/testing/selftests/vm/run_vmtests0
-rw-r--r--tools/testing/selftests/x86/.gitignore2
-rw-r--r--tools/testing/selftests/x86/Makefile48
-rw-r--r--tools/testing/selftests/x86/run_x86_tests.sh11
-rw-r--r--tools/testing/selftests/x86/sigreturn.c684
-rw-r--r--tools/testing/selftests/x86/trivial_32bit_program.c14
86 files changed, 5780 insertions, 270 deletions
diff --git a/tools/iio/Makefile b/tools/iio/Makefile
new file mode 100644
index 000000000000..bf7ae6d6612a
--- /dev/null
+++ b/tools/iio/Makefile
@@ -0,0 +1,16 @@
+CC = gcc
+CFLAGS = -Wall -g -D_GNU_SOURCE
+
+all: iio_event_monitor lsiio generic_buffer
+
+iio_event_monitor: iio_event_monitor.o iio_utils.o
+
+lsiio: lsiio.o iio_utils.o
+
+generic_buffer: generic_buffer.o iio_utils.o
+
+%.o: %.c iio_utils.h
+
+.PHONY: clean
+clean:
+ rm -f *.o iio_event_monitor lsiio generic_buffer
diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
new file mode 100644
index 000000000000..f805493be3eb
--- /dev/null
+++ b/tools/iio/generic_buffer.c
@@ -0,0 +1,359 @@
+/* Industrialio buffer test code.
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is primarily intended as an example application.
+ * Reads the current buffer setup from sysfs and starts a short capture
+ * from the specified device, pretty printing the result after appropriate
+ * conversion.
+ *
+ * Command line parameters
+ * generic_buffer -n <device_name> -t <trigger_name>
+ * If trigger name is not specified the program assumes you want a dataready
+ * trigger associated with the device and goes looking for it.
+ *
+ */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <dirent.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/dir.h>
+#include <linux/types.h>
+#include <string.h>
+#include <poll.h>
+#include <endian.h>
+#include <getopt.h>
+#include <inttypes.h>
+#include "iio_utils.h"
+
+/**
+ * size_from_channelarray() - calculate the storage size of a scan
+ * @channels: the channel info array
+ * @num_channels: number of channels
+ *
+ * Has the side effect of filling the channels[i].location values used
+ * in processing the buffer output.
+ **/
+int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
+{
+ int bytes = 0;
+ int i = 0;
+
+ while (i < num_channels) {
+ if (bytes % channels[i].bytes == 0)
+ channels[i].location = bytes;
+ else
+ channels[i].location = bytes - bytes%channels[i].bytes
+ + channels[i].bytes;
+ bytes = channels[i].location + channels[i].bytes;
+ i++;
+ }
+ return bytes;
+}
+
+void print2byte(int input, struct iio_channel_info *info)
+{
+ /* First swap if incorrect endian */
+ if (info->be)
+ input = be16toh((uint16_t)input);
+ else
+ input = le16toh((uint16_t)input);
+
+ /*
+ * Shift before conversion to avoid sign extension
+ * of left aligned data
+ */
+ input >>= info->shift;
+ if (info->is_signed) {
+ int16_t val = input;
+
+ val &= (1 << info->bits_used) - 1;
+ val = (int16_t)(val << (16 - info->bits_used)) >>
+ (16 - info->bits_used);
+ printf("%05f ", ((float)val + info->offset)*info->scale);
+ } else {
+ uint16_t val = input;
+
+ val &= (1 << info->bits_used) - 1;
+ printf("%05f ", ((float)val + info->offset)*info->scale);
+ }
+}
+/**
+ * process_scan() - print out the values in SI units
+ * @data: pointer to the start of the scan
+ * @channels: information about the channels. Note
+ * size_from_channelarray must have been called first to fill the
+ * location offsets.
+ * @num_channels: number of channels
+ **/
+void process_scan(char *data,
+ struct iio_channel_info *channels,
+ int num_channels)
+{
+ int k;
+
+ for (k = 0; k < num_channels; k++)
+ switch (channels[k].bytes) {
+ /* only a few cases implemented so far */
+ case 2:
+ print2byte(*(uint16_t *)(data + channels[k].location),
+ &channels[k]);
+ break;
+ case 4:
+ if (!channels[k].is_signed) {
+ uint32_t val = *(uint32_t *)
+ (data + channels[k].location);
+ printf("%05f ", ((float)val +
+ channels[k].offset)*
+ channels[k].scale);
+
+ }
+ break;
+ case 8:
+ if (channels[k].is_signed) {
+ int64_t val = *(int64_t *)
+ (data +
+ channels[k].location);
+ if ((val >> channels[k].bits_used) & 1)
+ val = (val & channels[k].mask) |
+ ~channels[k].mask;
+ /* special case for timestamp */
+ if (channels[k].scale == 1.0f &&
+ channels[k].offset == 0.0f)
+ printf("%" PRId64 " ", val);
+ else
+ printf("%05f ", ((float)val +
+ channels[k].offset)*
+ channels[k].scale);
+ }
+ break;
+ default:
+ break;
+ }
+ printf("\n");
+}
+
+int main(int argc, char **argv)
+{
+ unsigned long num_loops = 2;
+ unsigned long timedelay = 1000000;
+ unsigned long buf_len = 128;
+
+ int ret, c, i, j, toread;
+ int fp;
+
+ int num_channels;
+ char *trigger_name = NULL, *device_name = NULL;
+ char *dev_dir_name, *buf_dir_name;
+
+ int datardytrigger = 1;
+ char *data;
+ ssize_t read_size;
+ int dev_num, trig_num;
+ char *buffer_access;
+ int scan_size;
+ int noevents = 0;
+ int notrigger = 0;
+ char *dummy;
+
+ struct iio_channel_info *channels;
+
+ while ((c = getopt(argc, argv, "l:w:c:et:n:g")) != -1) {
+ switch (c) {
+ case 'n':
+ device_name = optarg;
+ break;
+ case 't':
+ trigger_name = optarg;
+ datardytrigger = 0;
+ break;
+ case 'e':
+ noevents = 1;
+ break;
+ case 'c':
+ num_loops = strtoul(optarg, &dummy, 10);
+ break;
+ case 'w':
+ timedelay = strtoul(optarg, &dummy, 10);
+ break;
+ case 'l':
+ buf_len = strtoul(optarg, &dummy, 10);
+ break;
+ case 'g':
+ notrigger = 1;
+ break;
+ case '?':
+ return -1;
+ }
+ }
+
+ if (device_name == NULL)
+ return -1;
+
+ /* Find the device requested */
+ dev_num = find_type_by_name(device_name, "iio:device");
+ if (dev_num < 0) {
+ printf("Failed to find the %s\n", device_name);
+ ret = -ENODEV;
+ goto error_ret;
+ }
+ printf("iio device number being used is %d\n", dev_num);
+
+ asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
+
+ if (!notrigger) {
+ if (trigger_name == NULL) {
+ /*
+ * Build the trigger name. If it is device associated
+ * its name is <device_name>_dev[n] where n matches
+ * the device number found above.
+ */
+ ret = asprintf(&trigger_name,
+ "%s-dev%d", device_name, dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ }
+
+ /* Verify the trigger exists */
+ trig_num = find_type_by_name(trigger_name, "trigger");
+ if (trig_num < 0) {
+ printf("Failed to find the trigger %s\n", trigger_name);
+ ret = -ENODEV;
+ goto error_free_triggername;
+ }
+ printf("iio trigger number being used is %d\n", trig_num);
+ } else
+ printf("trigger-less mode selected\n");
+
+ /*
+ * Parse the files in scan_elements to identify what channels are
+ * present
+ */
+ ret = build_channel_array(dev_dir_name, &channels, &num_channels);
+ if (ret) {
+ printf("Problem reading scan element information\n");
+ printf("diag %s\n", dev_dir_name);
+ goto error_free_triggername;
+ }
+
+ /*
+ * Construct the directory name for the associated buffer.
+ * As we know that the lis3l02dq has only one buffer this may
+ * be built rather than found.
+ */
+ ret = asprintf(&buf_dir_name,
+ "%siio:device%d/buffer", iio_dir, dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_triggername;
+ }
+
+ if (!notrigger) {
+ printf("%s %s\n", dev_dir_name, trigger_name);
+ /* Set the device trigger to be the data ready trigger found
+ * above */
+ ret = write_sysfs_string_and_verify("trigger/current_trigger",
+ dev_dir_name,
+ trigger_name);
+ if (ret < 0) {
+ printf("Failed to write current_trigger file\n");
+ goto error_free_buf_dir_name;
+ }
+ }
+
+ /* Setup ring buffer parameters */
+ ret = write_sysfs_int("length", buf_dir_name, buf_len);
+ if (ret < 0)
+ goto error_free_buf_dir_name;
+
+ /* Enable the buffer */
+ ret = write_sysfs_int("enable", buf_dir_name, 1);
+ if (ret < 0)
+ goto error_free_buf_dir_name;
+ scan_size = size_from_channelarray(channels, num_channels);
+ data = malloc(scan_size*buf_len);
+ if (!data) {
+ ret = -ENOMEM;
+ goto error_free_buf_dir_name;
+ }
+
+ ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_data;
+ }
+
+ /* Attempt to open non blocking the access dev */
+ fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
+ if (fp == -1) { /* If it isn't there make the node */
+ printf("Failed to open %s\n", buffer_access);
+ ret = -errno;
+ goto error_free_buffer_access;
+ }
+
+ /* Wait for events 10 times */
+ for (j = 0; j < num_loops; j++) {
+ if (!noevents) {
+ struct pollfd pfd = {
+ .fd = fp,
+ .events = POLLIN,
+ };
+
+ poll(&pfd, 1, -1);
+ toread = buf_len;
+
+ } else {
+ usleep(timedelay);
+ toread = 64;
+ }
+
+ read_size = read(fp,
+ data,
+ toread*scan_size);
+ if (read_size < 0) {
+ if (errno == -EAGAIN) {
+ printf("nothing available\n");
+ continue;
+ } else
+ break;
+ }
+ for (i = 0; i < read_size/scan_size; i++)
+ process_scan(data + scan_size*i,
+ channels,
+ num_channels);
+ }
+
+ /* Stop the buffer */
+ ret = write_sysfs_int("enable", buf_dir_name, 0);
+ if (ret < 0)
+ goto error_close_buffer_access;
+
+ if (!notrigger)
+ /* Disconnect the trigger - just write a dummy name. */
+ write_sysfs_string("trigger/current_trigger",
+ dev_dir_name, "NULL");
+
+error_close_buffer_access:
+ close(fp);
+error_free_data:
+ free(data);
+error_free_buffer_access:
+ free(buffer_access);
+error_free_buf_dir_name:
+ free(buf_dir_name);
+error_free_triggername:
+ if (datardytrigger)
+ free(trigger_name);
+error_ret:
+ return ret;
+}
diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
new file mode 100644
index 000000000000..427c271ac0d6
--- /dev/null
+++ b/tools/iio/iio_event_monitor.c
@@ -0,0 +1,308 @@
+/* Industrialio event test code.
+ *
+ * Copyright (c) 2011-2012 Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is primarily intended as an example application.
+ * Reads the current buffer setup from sysfs and starts a short capture
+ * from the specified device, pretty printing the result after appropriate
+ * conversion.
+ *
+ * Usage:
+ * iio_event_monitor <device_name>
+ *
+ */
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <poll.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include "iio_utils.h"
+#include <linux/iio/events.h>
+#include <linux/iio/types.h>
+
+static const char * const iio_chan_type_name_spec[] = {
+ [IIO_VOLTAGE] = "voltage",
+ [IIO_CURRENT] = "current",
+ [IIO_POWER] = "power",
+ [IIO_ACCEL] = "accel",
+ [IIO_ANGL_VEL] = "anglvel",
+ [IIO_MAGN] = "magn",
+ [IIO_LIGHT] = "illuminance",
+ [IIO_INTENSITY] = "intensity",
+ [IIO_PROXIMITY] = "proximity",
+ [IIO_TEMP] = "temp",
+ [IIO_INCLI] = "incli",
+ [IIO_ROT] = "rot",
+ [IIO_ANGL] = "angl",
+ [IIO_TIMESTAMP] = "timestamp",
+ [IIO_CAPACITANCE] = "capacitance",
+ [IIO_ALTVOLTAGE] = "altvoltage",
+ [IIO_CCT] = "cct",
+ [IIO_PRESSURE] = "pressure",
+ [IIO_HUMIDITYRELATIVE] = "humidityrelative",
+ [IIO_ACTIVITY] = "activity",
+ [IIO_STEPS] = "steps",
+};
+
+static const char * const iio_ev_type_text[] = {
+ [IIO_EV_TYPE_THRESH] = "thresh",
+ [IIO_EV_TYPE_MAG] = "mag",
+ [IIO_EV_TYPE_ROC] = "roc",
+ [IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive",
+ [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
+ [IIO_EV_TYPE_CHANGE] = "change",
+};
+
+static const char * const iio_ev_dir_text[] = {
+ [IIO_EV_DIR_EITHER] = "either",
+ [IIO_EV_DIR_RISING] = "rising",
+ [IIO_EV_DIR_FALLING] = "falling"
+};
+
+static const char * const iio_modifier_names[] = {
+ [IIO_MOD_X] = "x",
+ [IIO_MOD_Y] = "y",
+ [IIO_MOD_Z] = "z",
+ [IIO_MOD_X_AND_Y] = "x&y",
+ [IIO_MOD_X_AND_Z] = "x&z",
+ [IIO_MOD_Y_AND_Z] = "y&z",
+ [IIO_MOD_X_AND_Y_AND_Z] = "x&y&z",
+ [IIO_MOD_X_OR_Y] = "x|y",
+ [IIO_MOD_X_OR_Z] = "x|z",
+ [IIO_MOD_Y_OR_Z] = "y|z",
+ [IIO_MOD_X_OR_Y_OR_Z] = "x|y|z",
+ [IIO_MOD_LIGHT_BOTH] = "both",
+ [IIO_MOD_LIGHT_IR] = "ir",
+ [IIO_MOD_ROOT_SUM_SQUARED_X_Y] = "sqrt(x^2+y^2)",
+ [IIO_MOD_SUM_SQUARED_X_Y_Z] = "x^2+y^2+z^2",
+ [IIO_MOD_LIGHT_CLEAR] = "clear",
+ [IIO_MOD_LIGHT_RED] = "red",
+ [IIO_MOD_LIGHT_GREEN] = "green",
+ [IIO_MOD_LIGHT_BLUE] = "blue",
+ [IIO_MOD_QUATERNION] = "quaternion",
+ [IIO_MOD_TEMP_AMBIENT] = "ambient",
+ [IIO_MOD_TEMP_OBJECT] = "object",
+ [IIO_MOD_NORTH_MAGN] = "from_north_magnetic",
+ [IIO_MOD_NORTH_TRUE] = "from_north_true",
+ [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp",
+ [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp",
+ [IIO_MOD_RUNNING] = "running",
+ [IIO_MOD_JOGGING] = "jogging",
+ [IIO_MOD_WALKING] = "walking",
+ [IIO_MOD_STILL] = "still",
+};
+
+static bool event_is_known(struct iio_event_data *event)
+{
+ enum iio_chan_type type = IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event->id);
+ enum iio_modifier mod = IIO_EVENT_CODE_EXTRACT_MODIFIER(event->id);
+ enum iio_event_type ev_type = IIO_EVENT_CODE_EXTRACT_TYPE(event->id);
+ enum iio_event_direction dir = IIO_EVENT_CODE_EXTRACT_DIR(event->id);
+
+ switch (type) {
+ case IIO_VOLTAGE:
+ case IIO_CURRENT:
+ case IIO_POWER:
+ case IIO_ACCEL:
+ case IIO_ANGL_VEL:
+ case IIO_MAGN:
+ case IIO_LIGHT:
+ case IIO_INTENSITY:
+ case IIO_PROXIMITY:
+ case IIO_TEMP:
+ case IIO_INCLI:
+ case IIO_ROT:
+ case IIO_ANGL:
+ case IIO_TIMESTAMP:
+ case IIO_CAPACITANCE:
+ case IIO_ALTVOLTAGE:
+ case IIO_CCT:
+ case IIO_PRESSURE:
+ case IIO_HUMIDITYRELATIVE:
+ case IIO_ACTIVITY:
+ case IIO_STEPS:
+ break;
+ default:
+ return false;
+ }
+
+ switch (mod) {
+ case IIO_NO_MOD:
+ case IIO_MOD_X:
+ case IIO_MOD_Y:
+ case IIO_MOD_Z:
+ case IIO_MOD_X_AND_Y:
+ case IIO_MOD_X_AND_Z:
+ case IIO_MOD_Y_AND_Z:
+ case IIO_MOD_X_AND_Y_AND_Z:
+ case IIO_MOD_X_OR_Y:
+ case IIO_MOD_X_OR_Z:
+ case IIO_MOD_Y_OR_Z:
+ case IIO_MOD_X_OR_Y_OR_Z:
+ case IIO_MOD_LIGHT_BOTH:
+ case IIO_MOD_LIGHT_IR:
+ case IIO_MOD_ROOT_SUM_SQUARED_X_Y:
+ case IIO_MOD_SUM_SQUARED_X_Y_Z:
+ case IIO_MOD_LIGHT_CLEAR:
+ case IIO_MOD_LIGHT_RED:
+ case IIO_MOD_LIGHT_GREEN:
+ case IIO_MOD_LIGHT_BLUE:
+ case IIO_MOD_QUATERNION:
+ case IIO_MOD_TEMP_AMBIENT:
+ case IIO_MOD_TEMP_OBJECT:
+ case IIO_MOD_NORTH_MAGN:
+ case IIO_MOD_NORTH_TRUE:
+ case IIO_MOD_NORTH_MAGN_TILT_COMP:
+ case IIO_MOD_NORTH_TRUE_TILT_COMP:
+ case IIO_MOD_RUNNING:
+ case IIO_MOD_JOGGING:
+ case IIO_MOD_WALKING:
+ case IIO_MOD_STILL:
+ break;
+ default:
+ return false;
+ }
+
+ switch (ev_type) {
+ case IIO_EV_TYPE_THRESH:
+ case IIO_EV_TYPE_MAG:
+ case IIO_EV_TYPE_ROC:
+ case IIO_EV_TYPE_THRESH_ADAPTIVE:
+ case IIO_EV_TYPE_MAG_ADAPTIVE:
+ case IIO_EV_TYPE_CHANGE:
+ break;
+ default:
+ return false;
+ }
+
+ switch (dir) {
+ case IIO_EV_DIR_EITHER:
+ case IIO_EV_DIR_RISING:
+ case IIO_EV_DIR_FALLING:
+ case IIO_EV_DIR_NONE:
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
+static void print_event(struct iio_event_data *event)
+{
+ enum iio_chan_type type = IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event->id);
+ enum iio_modifier mod = IIO_EVENT_CODE_EXTRACT_MODIFIER(event->id);
+ enum iio_event_type ev_type = IIO_EVENT_CODE_EXTRACT_TYPE(event->id);
+ enum iio_event_direction dir = IIO_EVENT_CODE_EXTRACT_DIR(event->id);
+ int chan = IIO_EVENT_CODE_EXTRACT_CHAN(event->id);
+ int chan2 = IIO_EVENT_CODE_EXTRACT_CHAN2(event->id);
+ bool diff = IIO_EVENT_CODE_EXTRACT_DIFF(event->id);
+
+ if (!event_is_known(event)) {
+ printf("Unknown event: time: %lld, id: %llx\n",
+ event->timestamp, event->id);
+ return;
+ }
+
+ printf("Event: time: %lld, ", event->timestamp);
+
+ if (mod != IIO_NO_MOD) {
+ printf("type: %s(%s), ",
+ iio_chan_type_name_spec[type],
+ iio_modifier_names[mod]);
+ } else {
+ printf("type: %s, ",
+ iio_chan_type_name_spec[type]);
+ }
+
+ if (diff && chan >= 0 && chan2 >= 0)
+ printf("channel: %d-%d, ", chan, chan2);
+ else if (chan >= 0)
+ printf("channel: %d, ", chan);
+
+ printf("evtype: %s", iio_ev_type_text[ev_type]);
+
+ if (dir != IIO_EV_DIR_NONE)
+ printf(", direction: %s", iio_ev_dir_text[dir]);
+ printf("\n");
+}
+
+int main(int argc, char **argv)
+{
+ struct iio_event_data event;
+ const char *device_name;
+ char *chrdev_name;
+ int ret;
+ int dev_num;
+ int fd, event_fd;
+
+ if (argc <= 1) {
+ printf("Usage: %s <device_name>\n", argv[0]);
+ return -1;
+ }
+
+ device_name = argv[1];
+
+ dev_num = find_type_by_name(device_name, "iio:device");
+ if (dev_num >= 0) {
+ printf("Found IIO device with name %s with device number %d\n",
+ device_name, dev_num);
+ ret = asprintf(&chrdev_name, "/dev/iio:device%d", dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ } else {
+ /* If we can't find a IIO device by name assume device_name is a
+ IIO chrdev */
+ chrdev_name = strdup(device_name);
+ }
+
+ fd = open(chrdev_name, 0);
+ if (fd == -1) {
+ fprintf(stdout, "Failed to open %s\n", chrdev_name);
+ ret = -errno;
+ goto error_free_chrdev_name;
+ }
+
+ ret = ioctl(fd, IIO_GET_EVENT_FD_IOCTL, &event_fd);
+
+ close(fd);
+
+ if (ret == -1 || event_fd == -1) {
+ fprintf(stdout, "Failed to retrieve event fd\n");
+ ret = -errno;
+ goto error_free_chrdev_name;
+ }
+
+ while (true) {
+ ret = read(event_fd, &event, sizeof(event));
+ if (ret == -1) {
+ if (errno == EAGAIN) {
+ printf("nothing available\n");
+ continue;
+ } else {
+ perror("Failed to read event from device");
+ ret = -errno;
+ break;
+ }
+ }
+
+ print_event(&event);
+ }
+
+ close(event_fd);
+error_free_chrdev_name:
+ free(chrdev_name);
+error_ret:
+ return ret;
+}
diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c
new file mode 100644
index 000000000000..6f6452167b67
--- /dev/null
+++ b/tools/iio/iio_utils.c
@@ -0,0 +1,669 @@
+/* IIO - useful set of util functionality
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _IIO_UTILS_H
+#define _IIO_UTILS_H
+
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <dirent.h>
+#include <errno.h>
+#include <ctype.h>
+#include "iio_utils.h"
+
+const char *iio_dir = "/sys/bus/iio/devices/";
+
+static char * const iio_direction[] = {
+ "in",
+ "out",
+};
+
+/**
+ * iioutils_break_up_name() - extract generic name from full channel name
+ * @full_name: the full channel name
+ * @generic_name: the output generic channel name
+ **/
+int iioutils_break_up_name(const char *full_name,
+ char **generic_name)
+{
+ char *current;
+ char *w, *r;
+ char *working, *prefix = "";
+ int i;
+
+ for (i = 0; i < sizeof(iio_direction) / sizeof(iio_direction[0]); i++)
+ if (!strncmp(full_name, iio_direction[i],
+ strlen(iio_direction[i]))) {
+ prefix = iio_direction[i];
+ break;
+ }
+
+ current = strdup(full_name + strlen(prefix) + 1);
+ working = strtok(current, "_\0");
+
+ w = working;
+ r = working;
+
+ while (*r != '\0') {
+ if (!isdigit(*r)) {
+ *w = *r;
+ w++;
+ }
+ r++;
+ }
+ *w = '\0';
+ asprintf(generic_name, "%s_%s", prefix, working);
+ free(current);
+
+ return 0;
+}
+
+/**
+ * iioutils_get_type() - find and process _type attribute data
+ * @is_signed: output whether channel is signed
+ * @bytes: output how many bytes the channel storage occupies
+ * @mask: output a bit mask for the raw data
+ * @be: big endian
+ * @device_dir: the iio device directory
+ * @name: the channel name
+ * @generic_name: the channel type name
+ **/
+int iioutils_get_type(unsigned *is_signed,
+ unsigned *bytes,
+ unsigned *bits_used,
+ unsigned *shift,
+ uint64_t *mask,
+ unsigned *be,
+ const char *device_dir,
+ const char *name,
+ const char *generic_name)
+{
+ FILE *sysfsfp;
+ int ret;
+ DIR *dp;
+ char *scan_el_dir, *builtname, *builtname_generic, *filename = 0;
+ char signchar, endianchar;
+ unsigned padint;
+ const struct dirent *ent;
+
+ ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ret = asprintf(&builtname, FORMAT_TYPE_FILE, name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_scan_el_dir;
+ }
+ ret = asprintf(&builtname_generic, FORMAT_TYPE_FILE, generic_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_builtname;
+ }
+
+ dp = opendir(scan_el_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_builtname_generic;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ /*
+ * Do we allow devices to override a generic name with
+ * a specific one?
+ */
+ if ((strcmp(builtname, ent->d_name) == 0) ||
+ (strcmp(builtname_generic, ent->d_name) == 0)) {
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_closedir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ printf("failed to open %s\n", filename);
+ ret = -errno;
+ goto error_free_filename;
+ }
+
+ ret = fscanf(sysfsfp,
+ "%ce:%c%u/%u>>%u",
+ &endianchar,
+ &signchar,
+ bits_used,
+ &padint, shift);
+ if (ret < 0) {
+ printf("failed to pass scan type description\n");
+ ret = -errno;
+ goto error_close_sysfsfp;
+ }
+ *be = (endianchar == 'b');
+ *bytes = padint / 8;
+ if (*bits_used == 64)
+ *mask = ~0;
+ else
+ *mask = (1 << *bits_used) - 1;
+ if (signchar == 's')
+ *is_signed = 1;
+ else
+ *is_signed = 0;
+ fclose(sysfsfp);
+ free(filename);
+
+ filename = 0;
+ sysfsfp = 0;
+ }
+error_close_sysfsfp:
+ if (sysfsfp)
+ fclose(sysfsfp);
+error_free_filename:
+ if (filename)
+ free(filename);
+error_closedir:
+ closedir(dp);
+error_free_builtname_generic:
+ free(builtname_generic);
+error_free_builtname:
+ free(builtname);
+error_free_scan_el_dir:
+ free(scan_el_dir);
+error_ret:
+ return ret;
+}
+
+int iioutils_get_param_float(float *output,
+ const char *param_name,
+ const char *device_dir,
+ const char *name,
+ const char *generic_name)
+{
+ FILE *sysfsfp;
+ int ret;
+ DIR *dp;
+ char *builtname, *builtname_generic;
+ char *filename = NULL;
+ const struct dirent *ent;
+
+ ret = asprintf(&builtname, "%s_%s", name, param_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ret = asprintf(&builtname_generic,
+ "%s_%s", generic_name, param_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_builtname;
+ }
+ dp = opendir(device_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_builtname_generic;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ if ((strcmp(builtname, ent->d_name) == 0) ||
+ (strcmp(builtname_generic, ent->d_name) == 0)) {
+ ret = asprintf(&filename,
+ "%s/%s", device_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_closedir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (!sysfsfp) {
+ ret = -errno;
+ goto error_free_filename;
+ }
+ fscanf(sysfsfp, "%f", output);
+ break;
+ }
+error_free_filename:
+ if (filename)
+ free(filename);
+error_closedir:
+ closedir(dp);
+error_free_builtname_generic:
+ free(builtname_generic);
+error_free_builtname:
+ free(builtname);
+error_ret:
+ return ret;
+}
+
+/**
+ * bsort_channel_array_by_index() - reorder so that the array is in index order
+ *
+ **/
+
+void bsort_channel_array_by_index(struct iio_channel_info **ci_array,
+ int cnt)
+{
+
+ struct iio_channel_info temp;
+ int x, y;
+
+ for (x = 0; x < cnt; x++)
+ for (y = 0; y < (cnt - 1); y++)
+ if ((*ci_array)[y].index > (*ci_array)[y+1].index) {
+ temp = (*ci_array)[y + 1];
+ (*ci_array)[y + 1] = (*ci_array)[y];
+ (*ci_array)[y] = temp;
+ }
+}
+
+/**
+ * build_channel_array() - function to figure out what channels are present
+ * @device_dir: the IIO device directory in sysfs
+ * @
+ **/
+int build_channel_array(const char *device_dir,
+ struct iio_channel_info **ci_array,
+ int *counter)
+{
+ DIR *dp;
+ FILE *sysfsfp;
+ int count, i;
+ struct iio_channel_info *current;
+ int ret;
+ const struct dirent *ent;
+ char *scan_el_dir;
+ char *filename;
+
+ *counter = 0;
+ ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ dp = opendir(scan_el_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_name;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
+ "_en") == 0) {
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_close_dir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ ret = -errno;
+ free(filename);
+ goto error_close_dir;
+ }
+ fscanf(sysfsfp, "%i", &ret);
+ if (ret == 1)
+ (*counter)++;
+ fclose(sysfsfp);
+ free(filename);
+ }
+ *ci_array = malloc(sizeof(**ci_array) * (*counter));
+ if (*ci_array == NULL) {
+ ret = -ENOMEM;
+ goto error_close_dir;
+ }
+ seekdir(dp, 0);
+ count = 0;
+ while (ent = readdir(dp), ent != NULL) {
+ if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
+ "_en") == 0) {
+ int current_enabled = 0;
+
+ current = &(*ci_array)[count++];
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ /* decrement count to avoid freeing name */
+ count--;
+ goto error_cleanup_array;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ free(filename);
+ ret = -errno;
+ goto error_cleanup_array;
+ }
+ fscanf(sysfsfp, "%i", &current_enabled);
+ fclose(sysfsfp);
+
+ if (!current_enabled) {
+ free(filename);
+ count--;
+ continue;
+ }
+
+ current->scale = 1.0;
+ current->offset = 0;
+ current->name = strndup(ent->d_name,
+ strlen(ent->d_name) -
+ strlen("_en"));
+ if (current->name == NULL) {
+ free(filename);
+ ret = -ENOMEM;
+ goto error_cleanup_array;
+ }
+ /* Get the generic and specific name elements */
+ ret = iioutils_break_up_name(current->name,
+ &current->generic_name);
+ if (ret) {
+ free(filename);
+ goto error_cleanup_array;
+ }
+ ret = asprintf(&filename,
+ "%s/%s_index",
+ scan_el_dir,
+ current->name);
+ if (ret < 0) {
+ free(filename);
+ ret = -ENOMEM;
+ goto error_cleanup_array;
+ }
+ sysfsfp = fopen(filename, "r");
+ fscanf(sysfsfp, "%u", &current->index);
+ fclose(sysfsfp);
+ free(filename);
+ /* Find the scale */
+ ret = iioutils_get_param_float(&current->scale,
+ "scale",
+ device_dir,
+ current->name,
+ current->generic_name);
+ if (ret < 0)
+ goto error_cleanup_array;
+ ret = iioutils_get_param_float(&current->offset,
+ "offset",
+ device_dir,
+ current->name,
+ current->generic_name);
+ if (ret < 0)
+ goto error_cleanup_array;
+ ret = iioutils_get_type(&current->is_signed,
+ &current->bytes,
+ &current->bits_used,
+ &current->shift,
+ &current->mask,
+ &current->be,
+ device_dir,
+ current->name,
+ current->generic_name);
+ }
+ }
+
+ closedir(dp);
+ /* reorder so that the array is in index order */
+ bsort_channel_array_by_index(ci_array, *counter);
+
+ return 0;
+
+error_cleanup_array:
+ for (i = count - 1; i >= 0; i--)
+ free((*ci_array)[i].name);
+ free(*ci_array);
+error_close_dir:
+ closedir(dp);
+error_free_name:
+ free(scan_el_dir);
+error_ret:
+ return ret;
+}
+
+/**
+ * find_type_by_name() - function to match top level types by name
+ * @name: top level type instance name
+ * @type: the type of top level instance being sort
+ *
+ * Typical types this is used for are device and trigger.
+ **/
+int find_type_by_name(const char *name, const char *type)
+{
+ const struct dirent *ent;
+ int number, numstrlen;
+
+ FILE *nameFile;
+ DIR *dp;
+ char thisname[IIO_MAX_NAME_LENGTH];
+ char *filename;
+
+ dp = opendir(iio_dir);
+ if (dp == NULL) {
+ printf("No industrialio devices available\n");
+ return -ENODEV;
+ }
+
+ while (ent = readdir(dp), ent != NULL) {
+ if (strcmp(ent->d_name, ".") != 0 &&
+ strcmp(ent->d_name, "..") != 0 &&
+ strlen(ent->d_name) > strlen(type) &&
+ strncmp(ent->d_name, type, strlen(type)) == 0) {
+ numstrlen = sscanf(ent->d_name + strlen(type),
+ "%d",
+ &number);
+ /* verify the next character is not a colon */
+ if (strncmp(ent->d_name + strlen(type) + numstrlen,
+ ":",
+ 1) != 0) {
+ filename = malloc(strlen(iio_dir)
+ + strlen(type)
+ + numstrlen
+ + 6);
+ if (filename == NULL) {
+ closedir(dp);
+ return -ENOMEM;
+ }
+ sprintf(filename, "%s%s%d/name",
+ iio_dir,
+ type,
+ number);
+ nameFile = fopen(filename, "r");
+ if (!nameFile) {
+ free(filename);
+ continue;
+ }
+ free(filename);
+ fscanf(nameFile, "%s", thisname);
+ fclose(nameFile);
+ if (strcmp(name, thisname) == 0) {
+ closedir(dp);
+ return number;
+ }
+ }
+ }
+ }
+ closedir(dp);
+ return -ENODEV;
+}
+
+int _write_sysfs_int(char *filename, char *basedir, int val, int verify)
+{
+ int ret = 0;
+ FILE *sysfsfp;
+ int test;
+ char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
+
+ if (temp == NULL)
+ return -ENOMEM;
+ sprintf(temp, "%s/%s", basedir, filename);
+ sysfsfp = fopen(temp, "w");
+ if (sysfsfp == NULL) {
+ printf("failed to open %s\n", temp);
+ ret = -errno;
+ goto error_free;
+ }
+ fprintf(sysfsfp, "%d", val);
+ fclose(sysfsfp);
+ if (verify) {
+ sysfsfp = fopen(temp, "r");
+ if (sysfsfp == NULL) {
+ printf("failed to open %s\n", temp);
+ ret = -errno;
+ goto error_free;
+ }
+ fscanf(sysfsfp, "%d", &test);
+ fclose(sysfsfp);
+ if (test != val) {
+ printf("Possible failure in int write %d to %s%s\n",
+ val,
+ basedir,
+ filename);
+ ret = -1;
+ }
+ }
+error_free:
+ free(temp);
+ return ret;
+}
+
+int write_sysfs_int(char *filename, char *basedir, int val)
+{
+ return _write_sysfs_int(filename, basedir, val, 0);
+}
+
+int write_sysfs_int_and_verify(char *filename, char *basedir, int val)
+{
+ return _write_sysfs_int(filename, basedir, val, 1);
+}
+
+int _write_sysfs_string(char *filename, char *basedir, char *val, int verify)
+{
+ int ret = 0;
+ FILE *sysfsfp;
+ char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
+
+ if (temp == NULL) {
+ printf("Memory allocation failed\n");
+ return -ENOMEM;
+ }
+ sprintf(temp, "%s/%s", basedir, filename);
+ sysfsfp = fopen(temp, "w");
+ if (sysfsfp == NULL) {
+ printf("Could not open %s\n", temp);
+ ret = -errno;
+ goto error_free;
+ }
+ fprintf(sysfsfp, "%s", val);
+ fclose(sysfsfp);
+ if (verify) {
+ sysfsfp = fopen(temp, "r");
+ if (sysfsfp == NULL) {
+ printf("could not open file to verify\n");
+ ret = -errno;
+ goto error_free;
+ }
+ fscanf(sysfsfp, "%s", temp);
+ fclose(sysfsfp);
+ if (strcmp(temp, val) != 0) {
+ printf("Possible failure in string write of %s "
+ "Should be %s "
+ "written to %s\%s\n",
+ temp,
+ val,
+ basedir,
+ filename);
+ ret = -1;
+ }
+ }
+error_free:
+ free(temp);
+
+ return ret;
+}
+
+/**
+ * write_sysfs_string_and_verify() - string write, readback and verify
+ * @filename: name of file to write to
+ * @basedir: the sysfs directory in which the file is to be found
+ * @val: the string to write
+ **/
+int write_sysfs_string_and_verify(char *filename, char *basedir, char *val)
+{
+ return _write_sysfs_string(filename, basedir, val, 1);
+}
+
+int write_sysfs_string(char *filename, char *basedir, char *val)
+{
+ return _write_sysfs_string(filename, basedir, val, 0);
+}
+
+int read_sysfs_posint(char *filename, char *basedir)
+{
+ int ret;
+ FILE *sysfsfp;
+ char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
+
+ if (temp == NULL) {
+ printf("Memory allocation failed");
+ return -ENOMEM;
+ }
+ sprintf(temp, "%s/%s", basedir, filename);
+ sysfsfp = fopen(temp, "r");
+ if (sysfsfp == NULL) {
+ ret = -errno;
+ goto error_free;
+ }
+ fscanf(sysfsfp, "%d\n", &ret);
+ fclose(sysfsfp);
+error_free:
+ free(temp);
+ return ret;
+}
+
+int read_sysfs_float(char *filename, char *basedir, float *val)
+{
+ int ret = 0;
+ FILE *sysfsfp;
+ char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
+
+ if (temp == NULL) {
+ printf("Memory allocation failed");
+ return -ENOMEM;
+ }
+ sprintf(temp, "%s/%s", basedir, filename);
+ sysfsfp = fopen(temp, "r");
+ if (sysfsfp == NULL) {
+ ret = -errno;
+ goto error_free;
+ }
+ fscanf(sysfsfp, "%f\n", val);
+ fclose(sysfsfp);
+error_free:
+ free(temp);
+ return ret;
+}
+
+int read_sysfs_string(const char *filename, const char *basedir, char *str)
+{
+ int ret = 0;
+ FILE *sysfsfp;
+ char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
+
+ if (temp == NULL) {
+ printf("Memory allocation failed");
+ return -ENOMEM;
+ }
+ sprintf(temp, "%s/%s", basedir, filename);
+ sysfsfp = fopen(temp, "r");
+ if (sysfsfp == NULL) {
+ ret = -errno;
+ goto error_free;
+ }
+ fscanf(sysfsfp, "%s\n", str);
+ fclose(sysfsfp);
+error_free:
+ free(temp);
+ return ret;
+}
+
+#endif /* _IIO_UTILS_H */
diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h
new file mode 100644
index 000000000000..1bc837b2d769
--- /dev/null
+++ b/tools/iio/iio_utils.h
@@ -0,0 +1,71 @@
+#ifndef _IIO_UTILS_H_
+#define _IIO_UTILS_H_
+
+/* IIO - useful set of util functionality
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <stdint.h>
+
+/* Made up value to limit allocation sizes */
+#define IIO_MAX_NAME_LENGTH 30
+
+#define FORMAT_SCAN_ELEMENTS_DIR "%s/scan_elements"
+#define FORMAT_TYPE_FILE "%s_type"
+
+extern const char *iio_dir;
+
+/**
+ * struct iio_channel_info - information about a given channel
+ * @name: channel name
+ * @generic_name: general name for channel type
+ * @scale: scale factor to be applied for conversion to si units
+ * @offset: offset to be applied for conversion to si units
+ * @index: the channel index in the buffer output
+ * @bytes: number of bytes occupied in buffer output
+ * @mask: a bit mask for the raw output
+ * @is_signed: is the raw value stored signed
+ * @enabled: is this channel enabled
+ **/
+struct iio_channel_info {
+ char *name;
+ char *generic_name;
+ float scale;
+ float offset;
+ unsigned index;
+ unsigned bytes;
+ unsigned bits_used;
+ unsigned shift;
+ uint64_t mask;
+ unsigned be;
+ unsigned is_signed;
+ unsigned location;
+};
+
+int iioutils_break_up_name(const char *full_name, char **generic_name);
+int iioutils_get_type(unsigned *is_signed, unsigned *bytes,
+ unsigned *bits_used, unsigned *shift,
+ uint64_t *mask, unsigned *be,
+ const char *device_dir, const char *name,
+ const char *generic_name);
+int iioutils_get_param_float(float *output, const char *param_name,
+ const char *device_dir, const char *name,
+ const char *generic_name);
+void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt);
+int build_channel_array(const char *device_dir,
+ struct iio_channel_info **ci_array, int *counter);
+int find_type_by_name(const char *name, const char *type);
+int write_sysfs_int(char *filename, char *basedir, int val);
+int write_sysfs_int_and_verify(char *filename, char *basedir, int val);
+int write_sysfs_string_and_verify(char *filename, char *basedir, char *val);
+int write_sysfs_string(char *filename, char *basedir, char *val);
+int read_sysfs_posint(char *filename, char *basedir);
+int read_sysfs_float(char *filename, char *basedir, float *val);
+int read_sysfs_string(const char *filename, const char *basedir, char *str);
+
+#endif /* _IIO_UTILS_H_ */
diff --git a/tools/iio/lsiio.c b/tools/iio/lsiio.c
new file mode 100644
index 000000000000..c585440f864e
--- /dev/null
+++ b/tools/iio/lsiio.c
@@ -0,0 +1,158 @@
+/*
+ * Industrial I/O utilities - lsiio.c
+ *
+ * Copyright (c) 2010 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <string.h>
+#include <dirent.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/dir.h>
+#include "iio_utils.h"
+
+
+static enum verbosity {
+ VERBLEVEL_DEFAULT, /* 0 gives lspci behaviour */
+ VERBLEVEL_SENSORS, /* 1 lists sensors */
+} verblevel = VERBLEVEL_DEFAULT;
+
+const char *type_device = "iio:device";
+const char *type_trigger = "trigger";
+
+
+static inline int check_prefix(const char *str, const char *prefix)
+{
+ return strlen(str) > strlen(prefix) &&
+ strncmp(str, prefix, strlen(prefix)) == 0;
+}
+
+static inline int check_postfix(const char *str, const char *postfix)
+{
+ return strlen(str) > strlen(postfix) &&
+ strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
+}
+
+static int dump_channels(const char *dev_dir_name)
+{
+ DIR *dp;
+ const struct dirent *ent;
+
+ dp = opendir(dev_dir_name);
+ if (dp == NULL)
+ return -errno;
+ while (ent = readdir(dp), ent != NULL)
+ if (check_prefix(ent->d_name, "in_") &&
+ check_postfix(ent->d_name, "_raw")) {
+ printf(" %-10s\n", ent->d_name);
+ }
+
+ return 0;
+}
+
+static int dump_one_device(const char *dev_dir_name)
+{
+ char name[IIO_MAX_NAME_LENGTH];
+ int dev_idx;
+ int retval;
+
+ retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_device),
+ "%i", &dev_idx);
+ if (retval != 1)
+ return -EINVAL;
+ read_sysfs_string("name", dev_dir_name, name);
+ printf("Device %03d: %s\n", dev_idx, name);
+
+ if (verblevel >= VERBLEVEL_SENSORS)
+ return dump_channels(dev_dir_name);
+ return 0;
+}
+
+static int dump_one_trigger(const char *dev_dir_name)
+{
+ char name[IIO_MAX_NAME_LENGTH];
+ int dev_idx;
+ int retval;
+
+ retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_trigger),
+ "%i", &dev_idx);
+ if (retval != 1)
+ return -EINVAL;
+ read_sysfs_string("name", dev_dir_name, name);
+ printf("Trigger %03d: %s\n", dev_idx, name);
+ return 0;
+}
+
+static void dump_devices(void)
+{
+ const struct dirent *ent;
+ DIR *dp;
+
+ dp = opendir(iio_dir);
+ if (dp == NULL) {
+ printf("No industrial I/O devices available\n");
+ return;
+ }
+
+ while (ent = readdir(dp), ent != NULL) {
+ if (check_prefix(ent->d_name, type_device)) {
+ char *dev_dir_name;
+
+ asprintf(&dev_dir_name, "%s%s", iio_dir, ent->d_name);
+ dump_one_device(dev_dir_name);
+ free(dev_dir_name);
+ if (verblevel >= VERBLEVEL_SENSORS)
+ printf("\n");
+ }
+ }
+ rewinddir(dp);
+ while (ent = readdir(dp), ent != NULL) {
+ if (check_prefix(ent->d_name, type_trigger)) {
+ char *dev_dir_name;
+
+ asprintf(&dev_dir_name, "%s%s", iio_dir, ent->d_name);
+ dump_one_trigger(dev_dir_name);
+ free(dev_dir_name);
+ }
+ }
+ closedir(dp);
+}
+
+int main(int argc, char **argv)
+{
+ int c, err = 0;
+
+ while ((c = getopt(argc, argv, "d:D:v")) != EOF) {
+ switch (c) {
+ case 'v':
+ verblevel++;
+ break;
+
+ case '?':
+ default:
+ err++;
+ break;
+ }
+ }
+ if (err || argc > optind) {
+ fprintf(stderr, "Usage: lsiio [options]...\n"
+ "List industrial I/O devices\n"
+ " -v, --verbose\n"
+ " Increase verbosity (may be given multiple times)\n"
+ );
+ exit(1);
+ }
+
+ dump_devices();
+
+ return 0;
+}
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index afe20ed9fac8..2c0bd8f2aad0 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -3976,7 +3976,7 @@ static struct print_arg *make_bprint_args(char *fmt, void *data, int size, struc
if (asprintf(&arg->atom.atom, "%lld", ip) < 0)
goto out_free;
- /* skip the first "%pf: " */
+ /* skip the first "%ps: " */
for (ptr = fmt + 5, bptr = data + field->offset;
bptr < data + size && *ptr; ptr++) {
int ls = 0;
diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm-def.h b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h
index d66ab799b35f..8c0c1a2770c8 100644
--- a/tools/perf/bench/mem-memcpy-x86-64-asm-def.h
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h
@@ -1,12 +1,12 @@
-MEMCPY_FN(__memcpy,
+MEMCPY_FN(memcpy_orig,
"x86-64-unrolled",
"unrolled memcpy() in arch/x86/lib/memcpy_64.S")
-MEMCPY_FN(memcpy_c,
+MEMCPY_FN(__memcpy,
"x86-64-movsq",
"movsq-based memcpy() in arch/x86/lib/memcpy_64.S")
-MEMCPY_FN(memcpy_c_e,
+MEMCPY_FN(memcpy_erms,
"x86-64-movsb",
"movsb-based memcpy() in arch/x86/lib/memcpy_64.S")
diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm.S b/tools/perf/bench/mem-memcpy-x86-64-asm.S
index fcd9cf00600a..e4c2c30143b9 100644
--- a/tools/perf/bench/mem-memcpy-x86-64-asm.S
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S
@@ -1,8 +1,6 @@
#define memcpy MEMCPY /* don't hide glibc's memcpy() */
#define altinstr_replacement text
#define globl p2align 4; .globl
-#define Lmemcpy_c globl memcpy_c; memcpy_c
-#define Lmemcpy_c_e globl memcpy_c_e; memcpy_c_e
#include "../../../arch/x86/lib/memcpy_64.S"
/*
* We need to provide note.GNU-stack section, saying that we want
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index db1d3a29d97f..d3dfb7936dcd 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -36,7 +36,7 @@ static const struct option options[] = {
"Specify length of memory to copy. "
"Available units: B, KB, MB, GB and TB (upper and lower)"),
OPT_STRING('r', "routine", &routine, "default",
- "Specify routine to copy"),
+ "Specify routine to copy, \"all\" runs all available routines"),
OPT_INTEGER('i', "iterations", &iterations,
"repeat memcpy() invocation this number of times"),
OPT_BOOLEAN('c', "cycle", &use_cycle,
@@ -135,55 +135,16 @@ struct bench_mem_info {
const char *const *usage;
};
-static int bench_mem_common(int argc, const char **argv,
- const char *prefix __maybe_unused,
- struct bench_mem_info *info)
+static void __bench_mem_routine(struct bench_mem_info *info, int r_idx, size_t len, double totallen)
{
- int i;
- size_t len;
- double totallen;
+ const struct routine *r = &info->routines[r_idx];
double result_bps[2];
u64 result_cycle[2];
- argc = parse_options(argc, argv, options,
- info->usage, 0);
-
- if (no_prefault && only_prefault) {
- fprintf(stderr, "Invalid options: -o and -n are mutually exclusive\n");
- return 1;
- }
-
- if (use_cycle)
- init_cycle();
-
- len = (size_t)perf_atoll((char *)length_str);
- totallen = (double)len * iterations;
-
result_cycle[0] = result_cycle[1] = 0ULL;
result_bps[0] = result_bps[1] = 0.0;
- if ((s64)len <= 0) {
- fprintf(stderr, "Invalid length:%s\n", length_str);
- return 1;
- }
-
- /* same to without specifying either of prefault and no-prefault */
- if (only_prefault && no_prefault)
- only_prefault = no_prefault = false;
-
- for (i = 0; info->routines[i].name; i++) {
- if (!strcmp(info->routines[i].name, routine))
- break;
- }
- if (!info->routines[i].name) {
- printf("Unknown routine:%s\n", routine);
- printf("Available routines...\n");
- for (i = 0; info->routines[i].name; i++) {
- printf("\t%s ... %s\n",
- info->routines[i].name, info->routines[i].desc);
- }
- return 1;
- }
+ printf("Routine %s (%s)\n", r->name, r->desc);
if (bench_format == BENCH_FORMAT_DEFAULT)
printf("# Copying %s Bytes ...\n\n", length_str);
@@ -191,28 +152,17 @@ static int bench_mem_common(int argc, const char **argv,
if (!only_prefault && !no_prefault) {
/* show both of results */
if (use_cycle) {
- result_cycle[0] =
- info->do_cycle(&info->routines[i], len, false);
- result_cycle[1] =
- info->do_cycle(&info->routines[i], len, true);
+ result_cycle[0] = info->do_cycle(r, len, false);
+ result_cycle[1] = info->do_cycle(r, len, true);
} else {
- result_bps[0] =
- info->do_gettimeofday(&info->routines[i],
- len, false);
- result_bps[1] =
- info->do_gettimeofday(&info->routines[i],
- len, true);
+ result_bps[0] = info->do_gettimeofday(r, len, false);
+ result_bps[1] = info->do_gettimeofday(r, len, true);
}
} else {
- if (use_cycle) {
- result_cycle[pf] =
- info->do_cycle(&info->routines[i],
- len, only_prefault);
- } else {
- result_bps[pf] =
- info->do_gettimeofday(&info->routines[i],
- len, only_prefault);
- }
+ if (use_cycle)
+ result_cycle[pf] = info->do_cycle(r, len, only_prefault);
+ else
+ result_bps[pf] = info->do_gettimeofday(r, len, only_prefault);
}
switch (bench_format) {
@@ -265,6 +215,60 @@ static int bench_mem_common(int argc, const char **argv,
die("unknown format: %d\n", bench_format);
break;
}
+}
+
+static int bench_mem_common(int argc, const char **argv,
+ const char *prefix __maybe_unused,
+ struct bench_mem_info *info)
+{
+ int i;
+ size_t len;
+ double totallen;
+
+ argc = parse_options(argc, argv, options,
+ info->usage, 0);
+
+ if (no_prefault && only_prefault) {
+ fprintf(stderr, "Invalid options: -o and -n are mutually exclusive\n");
+ return 1;
+ }
+
+ if (use_cycle)
+ init_cycle();
+
+ len = (size_t)perf_atoll((char *)length_str);
+ totallen = (double)len * iterations;
+
+ if ((s64)len <= 0) {
+ fprintf(stderr, "Invalid length:%s\n", length_str);
+ return 1;
+ }
+
+ /* same to without specifying either of prefault and no-prefault */
+ if (only_prefault && no_prefault)
+ only_prefault = no_prefault = false;
+
+ if (!strncmp(routine, "all", 3)) {
+ for (i = 0; info->routines[i].name; i++)
+ __bench_mem_routine(info, i, len, totallen);
+ return 0;
+ }
+
+ for (i = 0; info->routines[i].name; i++) {
+ if (!strcmp(info->routines[i].name, routine))
+ break;
+ }
+ if (!info->routines[i].name) {
+ printf("Unknown routine:%s\n", routine);
+ printf("Available routines...\n");
+ for (i = 0; info->routines[i].name; i++) {
+ printf("\t%s ... %s\n",
+ info->routines[i].name, info->routines[i].desc);
+ }
+ return 1;
+ }
+
+ __bench_mem_routine(info, i, len, totallen);
return 0;
}
diff --git a/tools/perf/bench/mem-memset-x86-64-asm-def.h b/tools/perf/bench/mem-memset-x86-64-asm-def.h
index a71dff97c1f5..f02d028771d9 100644
--- a/tools/perf/bench/mem-memset-x86-64-asm-def.h
+++ b/tools/perf/bench/mem-memset-x86-64-asm-def.h
@@ -1,12 +1,12 @@
-MEMSET_FN(__memset,
+MEMSET_FN(memset_orig,
"x86-64-unrolled",
"unrolled memset() in arch/x86/lib/memset_64.S")
-MEMSET_FN(memset_c,
+MEMSET_FN(__memset,
"x86-64-stosq",
"movsq-based memset() in arch/x86/lib/memset_64.S")
-MEMSET_FN(memset_c_e,
+MEMSET_FN(memset_erms,
"x86-64-stosb",
"movsb-based memset() in arch/x86/lib/memset_64.S")
diff --git a/tools/perf/bench/mem-memset-x86-64-asm.S b/tools/perf/bench/mem-memset-x86-64-asm.S
index 9e5af89ed13a..de278784c866 100644
--- a/tools/perf/bench/mem-memset-x86-64-asm.S
+++ b/tools/perf/bench/mem-memset-x86-64-asm.S
@@ -1,8 +1,6 @@
#define memset MEMSET /* don't hide glibc's memset() */
#define altinstr_replacement text
#define globl p2align 4; .globl
-#define Lmemset_c globl memset_c; memset_c
-#define Lmemset_c_e globl memset_c_e; memset_c_e
#include "../../../arch/x86/lib/memset_64.S"
/*
diff --git a/tools/perf/util/include/asm/alternative-asm.h b/tools/perf/util/include/asm/alternative-asm.h
index 6789d788d494..3a3a0f16456a 100644
--- a/tools/perf/util/include/asm/alternative-asm.h
+++ b/tools/perf/util/include/asm/alternative-asm.h
@@ -4,5 +4,6 @@
/* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */
#define altinstruction_entry #
+#define ALTERNATIVE_2 #
#endif
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index b5247d777f0e..d32cf93565da 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -456,7 +456,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
return -EINVAL;
}
if (field->name[0] == '[') {
- pr_err("Semantic error: %s is not a pointor"
+ pr_err("Semantic error: %s is not a pointer"
" nor array.\n", varname);
return -EINVAL;
}
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 0db571340edb..95abddcd7839 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -17,6 +17,7 @@ TARGETS += sysctl
TARGETS += timers
TARGETS += user
TARGETS += vm
+TARGETS += x86
#Please keep the TARGETS list alphabetically sorted
TARGETS_HOTPLUG = cpu-hotplug
@@ -55,7 +56,40 @@ clean_hotplug:
make -C $$TARGET clean; \
done;
+INSTALL_PATH ?= install
+INSTALL_PATH := $(abspath $(INSTALL_PATH))
+ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
+
+install:
+ifdef INSTALL_PATH
+ @# Ask all targets to install their files
+ mkdir -p $(INSTALL_PATH)
+ for TARGET in $(TARGETS); do \
+ mkdir -p $(INSTALL_PATH)/$$TARGET ; \
+ make -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
+ done;
+
+ @# Ask all targets to emit their test scripts
+ echo "#!/bin/bash" > $(ALL_SCRIPT)
+ echo "cd \$$(dirname \$$0)" >> $(ALL_SCRIPT)
+ echo "ROOT=\$$PWD" >> $(ALL_SCRIPT)
+
+ for TARGET in $(TARGETS); do \
+ echo "echo ; echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
+ echo "echo ========================================" >> $(ALL_SCRIPT); \
+ echo "cd $$TARGET" >> $(ALL_SCRIPT); \
+ make -s --no-print-directory -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
+ done;
+
+ chmod u+x $(ALL_SCRIPT)
+else
+ $(error Error: set INSTALL_PATH to use install)
+endif
+
clean:
for TARGET in $(TARGETS); do \
make -C $$TARGET clean; \
done;
+
+.PHONY: install
diff --git a/tools/testing/selftests/breakpoints/Makefile b/tools/testing/selftests/breakpoints/Makefile
index e18b42b254af..182235640209 100644
--- a/tools/testing/selftests/breakpoints/Makefile
+++ b/tools/testing/selftests/breakpoints/Makefile
@@ -16,8 +16,9 @@ else
echo "Not an x86 target, can't build breakpoints selftests"
endif
-run_tests:
- @./breakpoint_test || echo "breakpoints selftests: [FAIL]"
+TEST_PROGS := breakpoint_test
+
+include ../lib.mk
clean:
rm -fr breakpoint_test
diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile
index e9c28d8dc84b..fe1f99101c5d 100644
--- a/tools/testing/selftests/cpu-hotplug/Makefile
+++ b/tools/testing/selftests/cpu-hotplug/Makefile
@@ -1,9 +1,10 @@
all:
-run_tests:
- @/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]"
+TEST_PROGS := cpu-on-off-test.sh
+
+include ../lib.mk
run_full_test:
- @/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
+ @/bin/bash ./cpu-on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
clean:
diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
index 98b1d6565f2c..98b1d6565f2c 100644..100755
--- a/tools/testing/selftests/cpu-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
diff --git a/tools/testing/selftests/efivarfs/Makefile b/tools/testing/selftests/efivarfs/Makefile
index 29e8c6bc81b0..736c3ddfc787 100644
--- a/tools/testing/selftests/efivarfs/Makefile
+++ b/tools/testing/selftests/efivarfs/Makefile
@@ -1,12 +1,13 @@
-CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall
test_objs = open-unlink create-read
all: $(test_objs)
-run_tests: all
- @/bin/bash ./efivarfs.sh || echo "efivarfs selftests: [FAIL]"
+TEST_PROGS := efivarfs.sh
+TEST_FILES := $(test_objs)
+
+include ../lib.mk
clean:
rm -f $(test_objs)
diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh
index 77edcdcc016b..77edcdcc016b 100644..100755
--- a/tools/testing/selftests/efivarfs/efivarfs.sh
+++ b/tools/testing/selftests/efivarfs/efivarfs.sh
diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile
index 66dfc2ce1788..4edb7d0da29b 100644
--- a/tools/testing/selftests/exec/Makefile
+++ b/tools/testing/selftests/exec/Makefile
@@ -1,4 +1,3 @@
-CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall
BINARIES = execveat
DEPS = execveat.symlink execveat.denatured script subdir
@@ -18,8 +17,12 @@ execveat.denatured: execveat
%: %.c
$(CC) $(CFLAGS) -o $@ $^
-run_tests: all
- ./execveat
+TEST_PROGS := execveat
+TEST_FILES := $(DEPS)
+
+include ../lib.mk
+
+override EMIT_TESTS := echo "mkdir -p subdir; (./execveat && echo \"selftests: execveat [PASS]\") || echo \"selftests: execveat [FAIL]\""
clean:
rm -rf $(BINARIES) $(DEPS) subdir.moved execveat.moved xxxxx*
diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile
index e23cce0bbc3a..9bf82234855b 100644
--- a/tools/testing/selftests/firmware/Makefile
+++ b/tools/testing/selftests/firmware/Makefile
@@ -3,25 +3,9 @@
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
all:
-fw_filesystem:
- @if /bin/sh ./fw_filesystem.sh ; then \
- echo "fw_filesystem: ok"; \
- else \
- echo "fw_filesystem: [FAIL]"; \
- exit 1; \
- fi
+TEST_PROGS := fw_filesystem.sh fw_userhelper.sh
-fw_userhelper:
- @if /bin/sh ./fw_userhelper.sh ; then \
- echo "fw_userhelper: ok"; \
- else \
- echo "fw_userhelper: [FAIL]"; \
- exit 1; \
- fi
-
-run_tests: all fw_filesystem fw_userhelper
+include ../lib.mk
# Nothing to clean up.
clean:
-
-.PHONY: all clean run_tests fw_filesystem fw_userhelper
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index 3fc6c10c2479..3fc6c10c2479 100644..100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
diff --git a/tools/testing/selftests/firmware/fw_userhelper.sh b/tools/testing/selftests/firmware/fw_userhelper.sh
index 6efbade12139..6efbade12139 100644..100755
--- a/tools/testing/selftests/firmware/fw_userhelper.sh
+++ b/tools/testing/selftests/firmware/fw_userhelper.sh
diff --git a/tools/testing/selftests/ftrace/Makefile b/tools/testing/selftests/ftrace/Makefile
index 76cc9f156267..346720639d1d 100644
--- a/tools/testing/selftests/ftrace/Makefile
+++ b/tools/testing/selftests/ftrace/Makefile
@@ -1,7 +1,8 @@
all:
-run_tests:
- @/bin/sh ./ftracetest || echo "ftrace selftests: [FAIL]"
+TEST_PROGS := ftracetest
+
+include ../lib.mk
clean:
rm -rf logs/*
diff --git a/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc b/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc
index fd9c49a13612..aa51f6c17359 100644
--- a/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc
+++ b/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc
@@ -2,4 +2,4 @@
# description: Basic event tracing check
test -f available_events -a -f set_event -a -d events
# check scheduler events are available
-grep -q sched available_events && exit 0 || exit -1 \ No newline at end of file
+grep -q sched available_events && exit 0 || exit $FAIL
diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
index 668616d9bb03..87eb9d6dd4ca 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
@@ -9,7 +9,11 @@ do_reset() {
fail() { #msg
do_reset
echo $1
- exit -1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f set_event -o ! -d events/sched ]; then
@@ -21,7 +25,8 @@ reset_tracer
do_reset
echo 'sched:sched_switch' > set_event
-usleep 1
+
+yield
count=`cat trace | grep sched_switch | wc -l`
if [ $count -eq 0 ]; then
@@ -31,7 +36,8 @@ fi
do_reset
echo 1 > events/sched/sched_switch/enable
-usleep 1
+
+yield
count=`cat trace | grep sched_switch | wc -l`
if [ $count -eq 0 ]; then
@@ -41,7 +47,8 @@ fi
do_reset
echo 0 > events/sched/sched_switch/enable
-usleep 1
+
+yield
count=`cat trace | grep sched_switch | wc -l`
if [ $count -ne 0 ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
index 655c415b6e7f..ced27ef0638f 100644
--- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
@@ -9,7 +9,11 @@ do_reset() {
fail() { #msg
do_reset
echo $1
- exit -1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f set_event -o ! -d events/sched ]; then
@@ -21,7 +25,8 @@ reset_tracer
do_reset
echo 'sched:*' > set_event
-usleep 1
+
+yield
count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -lt 3 ]; then
@@ -31,7 +36,8 @@ fi
do_reset
echo 1 > events/sched/enable
-usleep 1
+
+yield
count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -lt 3 ]; then
@@ -41,7 +47,8 @@ fi
do_reset
echo 0 > events/sched/enable
-usleep 1
+
+yield
count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -ne 0 ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
index 480845774007..0bb5df3c00d4 100644
--- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
@@ -9,7 +9,11 @@ do_reset() {
fail() { #msg
do_reset
echo $1
- exit -1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
@@ -21,6 +25,9 @@ reset_tracer
do_reset
echo '*:*' > set_event
+
+yield
+
count=`cat trace | grep -v ^# | wc -l`
if [ $count -eq 0 ]; then
fail "none of events are recorded"
@@ -29,6 +36,9 @@ fi
do_reset
echo 1 > events/enable
+
+yield
+
count=`cat trace | grep -v ^# | wc -l`
if [ $count -eq 0 ]; then
fail "none of events are recorded"
@@ -37,6 +47,9 @@ fi
do_reset
echo 0 > events/enable
+
+yield
+
count=`cat trace | grep -v ^# | wc -l`
if [ $count -ne 0 ]; then
fail "any of events should not be recorded"
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
index c15e018e0220..15c2dba06ea2 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
@@ -16,7 +16,9 @@ fi
do_reset() {
reset_tracer
- echo 0 > /proc/sys/kernel/stack_tracer_enabled
+ if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
+ echo 0 > /proc/sys/kernel/stack_tracer_enabled
+ fi
enable_tracing
clear_trace
echo > set_ftrace_filter
@@ -25,7 +27,7 @@ do_reset() {
fail() { # msg
do_reset
echo $1
- exit -1
+ exit $FAIL
}
disable_tracing
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
index 6af5f6360b18..0ab2189613ef 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
@@ -17,7 +17,7 @@ do_reset() {
fail() { # msg
do_reset
echo $1
- exit -1
+ exit $FAIL
}
disable_tracing
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
index 2e719cb1fc4d..7808336d6f50 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
@@ -31,7 +31,7 @@ fail() { # mesg
reset_tracer
echo > set_ftrace_filter
echo $1
- exit -1
+ exit $FAIL
}
echo "Testing function tracer with profiler:"
diff --git a/tools/testing/selftests/gen_kselftest_tar.sh b/tools/testing/selftests/gen_kselftest_tar.sh
new file mode 100755
index 000000000000..17d5bd0c0936
--- /dev/null
+++ b/tools/testing/selftests/gen_kselftest_tar.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# gen_kselftest_tar
+# Generate kselftest tarball
+# Author: Shuah Khan <shuahkh@osg.samsung.com>
+# Copyright (C) 2015 Samsung Electronics Co., Ltd.
+
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPLv2).
+
+# main
+main()
+{
+ if [ "$#" -eq 0 ]; then
+ echo "$0: Generating default compression gzip"
+ copts="cvzf"
+ ext=".tar.gz"
+ else
+ case "$1" in
+ tar)
+ copts="cvf"
+ ext=".tar"
+ ;;
+ targz)
+ copts="cvzf"
+ ext=".tar.gz"
+ ;;
+ tarbz2)
+ copts="cvjf"
+ ext=".tar.bz2"
+ ;;
+ tarxz)
+ copts="cvJf"
+ ext=".tar.xz"
+ ;;
+ *)
+ echo "Unknown tarball format $1"
+ exit 1
+ ;;
+ esac
+ fi
+
+ install_dir=./kselftest
+
+# Run install using INSTALL_KSFT_PATH override to generate install
+# directory
+./kselftest_install.sh
+tar $copts kselftest${ext} $install_dir
+echo "Kselftest archive kselftest${ext} created!"
+
+# clean up install directory
+rm -rf kselftest
+}
+
+main "$@"
diff --git a/tools/testing/selftests/ipc/Makefile b/tools/testing/selftests/ipc/Makefile
index 74bbefdeaf4c..25d2e702c68a 100644
--- a/tools/testing/selftests/ipc/Makefile
+++ b/tools/testing/selftests/ipc/Makefile
@@ -12,14 +12,11 @@ endif
CFLAGS += -I../../../../usr/include/
all:
-ifeq ($(ARCH),x86)
- gcc $(CFLAGS) msgque.c -o msgque_test
-else
- echo "Not an x86 target, can't build msgque selftest"
-endif
+ $(CC) $(CFLAGS) msgque.c -o msgque_test
+
+TEST_PROGS := msgque_test
-run_tests: all
- ./msgque_test
+include ../lib.mk
clean:
rm -fr ./msgque_test
diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile
index ff0eefdc6ceb..2ae7450a9a89 100644
--- a/tools/testing/selftests/kcmp/Makefile
+++ b/tools/testing/selftests/kcmp/Makefile
@@ -1,10 +1,10 @@
-CC := $(CROSS_COMPILE)$(CC)
CFLAGS += -I../../../../usr/include/
all: kcmp_test
-run_tests: all
- @./kcmp_test || echo "kcmp_test: [FAIL]"
+TEST_PROGS := kcmp_test
+
+include ../lib.mk
clean:
$(RM) kcmp_test kcmp-test-file
diff --git a/tools/testing/selftests/kselftest_install.sh b/tools/testing/selftests/kselftest_install.sh
new file mode 100755
index 000000000000..1555fbdb08da
--- /dev/null
+++ b/tools/testing/selftests/kselftest_install.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+#
+# Kselftest Install
+# Install kselftest tests
+# Author: Shuah Khan <shuahkh@osg.samsung.com>
+# Copyright (C) 2015 Samsung Electronics Co., Ltd.
+
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPLv2).
+
+install_loc=`pwd`
+
+main()
+{
+ if [ $(basename $install_loc) != "selftests" ]; then
+ echo "$0: Please run it in selftests directory ..."
+ exit 1;
+ fi
+ if [ "$#" -eq 0 ]; then
+ echo "$0: Installing in default location - $install_loc ..."
+ elif [ ! -d "$1" ]; then
+ echo "$0: $1 doesn't exist!!"
+ exit 1;
+ else
+ install_loc=$1
+ echo "$0: Installing in specified location - $install_loc ..."
+ fi
+
+ install_dir=$install_loc/kselftest
+
+# Create install directory
+ mkdir -p $install_dir
+# Build tests
+ INSTALL_PATH=$install_dir make install
+}
+
+main "$@"
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
new file mode 100644
index 000000000000..2194155ae62a
--- /dev/null
+++ b/tools/testing/selftests/lib.mk
@@ -0,0 +1,35 @@
+# This mimics the top-level Makefile. We do it explicitly here so that this
+# Makefile can operate with or without the kbuild infrastructure.
+CC := $(CROSS_COMPILE)gcc
+
+define RUN_TESTS
+ @for TEST in $(TEST_PROGS); do \
+ (./$$TEST && echo "selftests: $$TEST [PASS]") || echo "selftests: $$TEST [FAIL]"; \
+ done;
+endef
+
+run_tests: all
+ $(RUN_TESTS)
+
+define INSTALL_RULE
+ mkdir -p $(INSTALL_PATH)
+ install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
+endef
+
+install: all
+ifdef INSTALL_PATH
+ $(INSTALL_RULE)
+else
+ $(error Error: set INSTALL_PATH to use install)
+endif
+
+define EMIT_TESTS
+ @for TEST in $(TEST_PROGS); do \
+ echo "(./$$TEST && echo \"selftests: $$TEST [PASS]\") || echo \"selftests: $$TEST [FAIL]\""; \
+ done;
+endef
+
+emit_tests:
+ $(EMIT_TESTS)
+
+.PHONY: run_tests all clean install emit_tests
diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile
index b80cd10d53ba..3e7eb7972511 100644
--- a/tools/testing/selftests/memfd/Makefile
+++ b/tools/testing/selftests/memfd/Makefile
@@ -1,17 +1,19 @@
+CC = $(CROSS_COMPILE)gcc
CFLAGS += -D_FILE_OFFSET_BITS=64
CFLAGS += -I../../../../include/uapi/
CFLAGS += -I../../../../include/
+CFLAGS += -I../../../../usr/include/
all:
- gcc $(CFLAGS) memfd_test.c -o memfd_test
+ $(CC) $(CFLAGS) memfd_test.c -o memfd_test
-run_tests: all
- gcc $(CFLAGS) memfd_test.c -o memfd_test
- @./memfd_test || echo "memfd_test: [FAIL]"
+TEST_PROGS := memfd_test
+
+include ../lib.mk
build_fuse:
- gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
- gcc $(CFLAGS) fuse_test.c -o fuse_test
+ $(CC) $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
+ $(CC) $(CFLAGS) fuse_test.c -o fuse_test
run_fuse: build_fuse
@./run_fuse_test.sh || echo "fuse_test: [FAIL]"
diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile
index d46b8d489cd2..afb2624c7048 100644
--- a/tools/testing/selftests/memory-hotplug/Makefile
+++ b/tools/testing/selftests/memory-hotplug/Makefile
@@ -1,9 +1,12 @@
all:
-run_tests:
- @/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]"
+include ../lib.mk
+
+TEST_PROGS := mem-on-off-test.sh
+override RUN_TESTS := ./mem-on-off-test.sh -r 2 || echo "selftests: memory-hotplug [FAIL]"
+override EMIT_TESTS := echo "$(RUN_TESTS)"
run_full_test:
- @/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
+ @/bin/bash ./mem-on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
clean:
diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh
index 6cddde0b96f8..6cddde0b96f8 100644..100755
--- a/tools/testing/selftests/memory-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh
diff --git a/tools/testing/selftests/mount/.gitignore b/tools/testing/selftests/mount/.gitignore
new file mode 100644
index 000000000000..856ad4107eb3
--- /dev/null
+++ b/tools/testing/selftests/mount/.gitignore
@@ -0,0 +1 @@
+unprivileged-remount-test
diff --git a/tools/testing/selftests/mount/Makefile b/tools/testing/selftests/mount/Makefile
index 337d853c2b72..95580a97326e 100644
--- a/tools/testing/selftests/mount/Makefile
+++ b/tools/testing/selftests/mount/Makefile
@@ -1,17 +1,16 @@
# Makefile for mount selftests.
-
+CFLAGS = -Wall \
+ -O2
all: unprivileged-remount-test
unprivileged-remount-test: unprivileged-remount-test.c
- gcc -Wall -O2 unprivileged-remount-test.c -o unprivileged-remount-test
+ $(CC) $(CFLAGS) unprivileged-remount-test.c -o unprivileged-remount-test
-# Allow specific tests to be selected.
-test_unprivileged_remount: unprivileged-remount-test
- @if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi
+include ../lib.mk
-run_tests: all test_unprivileged_remount
+TEST_PROGS := unprivileged-remount-test
+override RUN_TESTS := if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi
+override EMIT_TESTS := echo "$(RUN_TESTS)"
clean:
rm -f unprivileged-remount-test
-
-.PHONY: all test_unprivileged_remount
diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile
index 8056e2e68fa4..0e3b41eb85cd 100644
--- a/tools/testing/selftests/mqueue/Makefile
+++ b/tools/testing/selftests/mqueue/Makefile
@@ -1,10 +1,22 @@
+CFLAGS = -O2
+
all:
- gcc -O2 mq_open_tests.c -o mq_open_tests -lrt
- gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
+ $(CC) $(CFLAGS) mq_open_tests.c -o mq_open_tests -lrt
+ $(CC) $(CFLAGS) -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
+
+include ../lib.mk
+
+override define RUN_TESTS
+ @./mq_open_tests /test1 || echo "selftests: mq_open_tests [FAIL]"
+ @./mq_perf_tests || echo "selftests: mq_perf_tests [FAIL]"
+endef
+
+TEST_PROGS := mq_open_tests mq_perf_tests
-run_tests:
- @./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]"
- @./mq_perf_tests || echo "mq_perf_tests: [FAIL]"
+override define EMIT_TESTS
+ echo "./mq_open_tests /test1 || echo \"selftests: mq_open_tests [FAIL]\""
+ echo "./mq_perf_tests || echo \"selftests: mq_perf_tests [FAIL]\""
+endef
clean:
rm -f mq_open_tests mq_perf_tests
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 62f22cc9941c..fac4782c51d8 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -1,6 +1,5 @@
# Makefile for net selftests
-CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall -O2 -g
CFLAGS += -I../../../../usr/include/
@@ -11,9 +10,10 @@ all: $(NET_PROGS)
%: %.c
$(CC) $(CFLAGS) -o $@ $^
-run_tests: all
- @/bin/sh ./run_netsocktests || echo "sockettests: [FAIL]"
- @/bin/sh ./run_afpackettests || echo "afpackettests: [FAIL]"
- ./test_bpf.sh
+TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh
+TEST_FILES := $(NET_PROGS)
+
+include ../lib.mk
+
clean:
$(RM) $(NET_PROGS)
diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests
index 5246e782d6e8..5246e782d6e8 100644..100755
--- a/tools/testing/selftests/net/run_afpackettests
+++ b/tools/testing/selftests/net/run_afpackettests
diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests
index c09a682df56a..c09a682df56a 100644..100755
--- a/tools/testing/selftests/net/run_netsocktests
+++ b/tools/testing/selftests/net/run_netsocktests
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 1d5e7ad2c460..2958fe9a74e9 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -8,10 +8,9 @@ ifeq ($(ARCH),powerpc)
GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown")
-CC := $(CROSS_COMPILE)$(CC)
CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS)
-export CC CFLAGS
+export CFLAGS
TARGETS = pmu copyloops mm tm primitives stringloops
@@ -22,10 +21,25 @@ all: $(TARGETS)
$(TARGETS):
$(MAKE) -k -C $@ all
-run_tests: all
+include ../lib.mk
+
+override define RUN_TESTS
@for TARGET in $(TARGETS); do \
$(MAKE) -C $$TARGET run_tests; \
done;
+endef
+
+override define INSTALL_RULE
+ @for TARGET in $(TARGETS); do \
+ $(MAKE) -C $$TARGET install; \
+ done;
+endef
+
+override define EMIT_TESTS
+ @for TARGET in $(TARGETS); do \
+ $(MAKE) -s -C $$TARGET emit_tests; \
+ done;
+endef
clean:
@for TARGET in $(TARGETS); do \
@@ -36,4 +50,4 @@ clean:
tags:
find . -name '*.c' -o -name '*.h' | xargs ctags
-.PHONY: all run_tests clean tags $(TARGETS)
+.PHONY: tags $(TARGETS)
diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile
index 6f2d3be227f9..c05023514ce8 100644
--- a/tools/testing/selftests/powerpc/copyloops/Makefile
+++ b/tools/testing/selftests/powerpc/copyloops/Makefile
@@ -6,24 +6,19 @@ CFLAGS += -D SELFTEST
# Use our CFLAGS for the implicit .S rule
ASFLAGS = $(CFLAGS)
-PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
+TEST_PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
EXTRA_SOURCES := validate.c ../harness.c
-all: $(PROGS)
+all: $(TEST_PROGS)
copyuser_64: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base
copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7
memcpy_64: CPPFLAGS += -D COPY_LOOP=test_memcpy
memcpy_power7: CPPFLAGS += -D COPY_LOOP=test_memcpy_power7
-$(PROGS): $(EXTRA_SOURCES)
+$(TEST_PROGS): $(EXTRA_SOURCES)
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index a14c538dd7f8..41cc3ed66818 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -1,21 +1,16 @@
noarg:
$(MAKE) -C ../
-PROGS := hugetlb_vs_thp_test subpage_prot
+TEST_PROGS := hugetlb_vs_thp_test subpage_prot
-all: $(PROGS) tempfile
+all: $(TEST_PROGS) tempfile
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
tempfile:
dd if=/dev/zero of=tempfile bs=64k count=1
clean:
- rm -f $(PROGS) tempfile
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) tempfile
diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile
index c9f4263906a5..5a161175bbd4 100644
--- a/tools/testing/selftests/powerpc/pmu/Makefile
+++ b/tools/testing/selftests/powerpc/pmu/Makefile
@@ -1,38 +1,42 @@
noarg:
$(MAKE) -C ../
-PROGS := count_instructions l3_bank_test per_event_excludes
+TEST_PROGS := count_instructions l3_bank_test per_event_excludes
EXTRA_SOURCES := ../harness.c event.c lib.c
-SUB_TARGETS = ebb
+all: $(TEST_PROGS) ebb
-all: $(PROGS) $(SUB_TARGETS)
-
-$(PROGS): $(EXTRA_SOURCES)
+$(TEST_PROGS): $(EXTRA_SOURCES)
# loop.S can only be built 64-bit
count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES)
$(CC) $(CFLAGS) -m64 -o $@ $^
-run_tests: all sub_run_tests
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
-clean: sub_clean
- rm -f $(PROGS) loop.o
+DEFAULT_RUN_TESTS := $(RUN_TESTS)
+override define RUN_TESTS
+ $(DEFAULT_RUN_TESTS)
+ $(MAKE) -C ebb run_tests
+endef
-$(SUB_TARGETS):
- $(MAKE) -k -C $@ all
+DEFAULT_EMIT_TESTS := $(EMIT_TESTS)
+override define EMIT_TESTS
+ $(DEFAULT_EMIT_TESTS)
+ $(MAKE) -s -C ebb emit_tests
+endef
-sub_run_tests: all
- @for TARGET in $(SUB_TARGETS); do \
- $(MAKE) -C $$TARGET run_tests; \
- done;
+DEFAULT_INSTALL := $(INSTALL_RULE)
+override define INSTALL_RULE
+ $(DEFAULT_INSTALL_RULE)
+ $(MAKE) -C ebb install
+endef
-sub_clean:
- @for TARGET in $(SUB_TARGETS); do \
- $(MAKE) -C $$TARGET clean; \
- done;
+clean:
+ rm -f $(TEST_PROGS) loop.o
+ $(MAKE) -C ebb clean
+
+ebb:
+ $(MAKE) -k -C $@ all
-.PHONY: all run_tests clean sub_run_tests sub_clean $(SUB_TARGETS)
+.PHONY: all run_tests clean ebb
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
index 3dc4332698cb..5cdc9dbf2b27 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile
+++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile
@@ -4,7 +4,7 @@ noarg:
# The EBB handler is 64-bit code and everything links against it
CFLAGS += -m64
-PROGS := reg_access_test event_attributes_test cycles_test \
+TEST_PROGS := reg_access_test event_attributes_test cycles_test \
cycles_with_freeze_test pmc56_overflow_test \
ebb_vs_cpu_event_test cpu_event_vs_ebb_test \
cpu_event_pinned_vs_ebb_test task_event_vs_ebb_test \
@@ -16,18 +16,15 @@ PROGS := reg_access_test event_attributes_test cycles_test \
lost_exception_test no_handler_test \
cycles_with_mmcr2_test
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
+$(TEST_PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
instruction_count_test: ../loop.S
lost_exception_test: ../lib.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../../lib.mk
clean:
- rm -f $(PROGS)
+ rm -f $(TEST_PROGS)
diff --git a/tools/testing/selftests/powerpc/primitives/Makefile b/tools/testing/selftests/powerpc/primitives/Makefile
index ea737ca01732..b68c6221d3d1 100644
--- a/tools/testing/selftests/powerpc/primitives/Makefile
+++ b/tools/testing/selftests/powerpc/primitives/Makefile
@@ -1,17 +1,12 @@
CFLAGS += -I$(CURDIR)
-PROGS := load_unaligned_zeropad
+TEST_PROGS := load_unaligned_zeropad
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/stringloops/Makefile b/tools/testing/selftests/powerpc/stringloops/Makefile
index 506d77346477..2a728f4d2873 100644
--- a/tools/testing/selftests/powerpc/stringloops/Makefile
+++ b/tools/testing/selftests/powerpc/stringloops/Makefile
@@ -2,19 +2,14 @@
CFLAGS += -m64
CFLAGS += -I$(CURDIR)
-PROGS := memcmp
+TEST_PROGS := memcmp
EXTRA_SOURCES := memcmp_64.S ../harness.c
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): $(EXTRA_SOURCES)
+$(TEST_PROGS): $(EXTRA_SOURCES)
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index 2cede239a074..34f2ec634b40 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,15 +1,10 @@
-PROGS := tm-resched-dscr
+TEST_PROGS := tm-resched-dscr
-all: $(PROGS)
+all: $(TEST_PROGS)
-$(PROGS): ../harness.c
+$(TEST_PROGS): ../harness.c
-run_tests: all
- @-for PROG in $(PROGS); do \
- ./$$PROG; \
- done;
+include ../../lib.mk
clean:
- rm -f $(PROGS) *.o
-
-.PHONY: all run_tests clean
+ rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/ptrace/Makefile b/tools/testing/selftests/ptrace/Makefile
index 47ae2d385ce8..453927fea90c 100644
--- a/tools/testing/selftests/ptrace/Makefile
+++ b/tools/testing/selftests/ptrace/Makefile
@@ -6,5 +6,6 @@ all: peeksiginfo
clean:
rm -f peeksiginfo
-run_tests: all
- @./peeksiginfo || echo "peeksiginfo selftests: [FAIL]"
+TEST_PROGS := peeksiginfo
+
+include ../lib.mk
diff --git a/tools/testing/selftests/size/Makefile b/tools/testing/selftests/size/Makefile
index 04dc25e4fa92..bbd0b5398b61 100644
--- a/tools/testing/selftests/size/Makefile
+++ b/tools/testing/selftests/size/Makefile
@@ -1,12 +1,11 @@
-CC = $(CROSS_COMPILE)gcc
-
all: get_size
get_size: get_size.c
$(CC) -static -ffreestanding -nostartfiles -s $< -o $@
-run_tests: all
- ./get_size
+TEST_PROGS := get_size
+
+include ../lib.mk
clean:
$(RM) get_size
diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile
index 0a92adaf0865..b3c33e071f10 100644
--- a/tools/testing/selftests/sysctl/Makefile
+++ b/tools/testing/selftests/sysctl/Makefile
@@ -4,16 +4,10 @@
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests".
all:
-# Allow specific tests to be selected.
-test_num:
- @/bin/sh ./run_numerictests
+TEST_PROGS := run_numerictests run_stringtests
+TEST_FILES := common_tests
-test_string:
- @/bin/sh ./run_stringtests
-
-run_tests: all test_num test_string
+include ../lib.mk
# Nothing to clean up.
clean:
-
-.PHONY: all run_tests clean test_num test_string
diff --git a/tools/testing/selftests/sysctl/run_numerictests b/tools/testing/selftests/sysctl/run_numerictests
index 8510f93f2d14..8510f93f2d14 100644..100755
--- a/tools/testing/selftests/sysctl/run_numerictests
+++ b/tools/testing/selftests/sysctl/run_numerictests
diff --git a/tools/testing/selftests/sysctl/run_stringtests b/tools/testing/selftests/sysctl/run_stringtests
index 90a9293d520c..90a9293d520c 100644..100755
--- a/tools/testing/selftests/sysctl/run_stringtests
+++ b/tools/testing/selftests/sysctl/run_stringtests
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
index eb2859f4ad21..89a3f44bf355 100644
--- a/tools/testing/selftests/timers/Makefile
+++ b/tools/testing/selftests/timers/Makefile
@@ -1,8 +1,36 @@
-all:
- gcc posix_timers.c -o posix_timers -lrt
+CC = $(CROSS_COMPILE)gcc
+BUILD_FLAGS = -DKTEST
+CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS)
+LDFLAGS += -lrt -lpthread
-run_tests: all
- ./posix_timers
+# these are all "safe" tests that don't modify
+# system time or require escalated privledges
+TEST_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
+ inconsistency-check raw_skew threadtest rtctest
+
+TEST_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex change_skew \
+ skew_consistency clocksource-switch leap-a-day \
+ leapcrash set-tai set-2038
+
+bins = $(TEST_PROGS) $(TEST_PROGS_EXTENDED)
+
+all: ${bins}
+
+include ../lib.mk
+
+# these tests require escalated privledges
+# and may modify the system time or trigger
+# other behavior like suspend
+run_destructive_tests: run_tests
+ ./alarmtimer-suspend
+ ./valid-adjtimex
+ ./change_skew
+ ./skew_consistency
+ ./clocksource-switch
+ ./leap-a-day -s -i 10
+ ./leapcrash
+ ./set-tai
+ ./set-2038
clean:
- rm -f ./posix_timers
+ rm -f ${bins}
diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c
new file mode 100644
index 000000000000..aaffbde1d5ee
--- /dev/null
+++ b/tools/testing/selftests/timers/alarmtimer-suspend.c
@@ -0,0 +1,185 @@
+/* alarmtimer suspend test
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * This test makes sure the alarmtimer & RTC wakeup code is
+ * functioning.
+ *
+ * To build:
+ * $ gcc alarmtimer-suspend.c -o alarmtimer-suspend -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+
+#define NSEC_PER_SEC 1000000000ULL
+#define UNREASONABLE_LAT (NSEC_PER_SEC * 4) /* hopefully we resume in 4secs */
+
+#define SUSPEND_SECS 15
+int alarmcount;
+int alarm_clock_id;
+struct timespec start_time;
+
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int final_ret = 0;
+
+void sigalarm(int signo)
+{
+ long long delta_ns;
+ struct timespec ts;
+
+ clock_gettime(alarm_clock_id, &ts);
+ alarmcount++;
+
+ delta_ns = timespec_sub(start_time, ts);
+ delta_ns -= NSEC_PER_SEC * SUSPEND_SECS * alarmcount;
+
+ printf("ALARM(%i): %ld:%ld latency: %lld ns ", alarmcount, ts.tv_sec,
+ ts.tv_nsec, delta_ns);
+
+ if (delta_ns > UNREASONABLE_LAT) {
+ printf("[FAIL]\n");
+ final_ret = -1;
+ } else
+ printf("[OK]\n");
+
+}
+
+int main(void)
+{
+ timer_t tm1;
+ struct itimerspec its1, its2;
+ struct sigevent se;
+ struct sigaction act;
+ int signum = SIGRTMAX;
+
+ /* Set up signal handler: */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = sigalarm;
+ sigaction(signum, &act, NULL);
+
+ /* Set up timer: */
+ memset(&se, 0, sizeof(se));
+ se.sigev_notify = SIGEV_SIGNAL;
+ se.sigev_signo = signum;
+ se.sigev_value.sival_int = 0;
+
+ for (alarm_clock_id = CLOCK_REALTIME_ALARM;
+ alarm_clock_id <= CLOCK_BOOTTIME_ALARM;
+ alarm_clock_id++) {
+
+ alarmcount = 0;
+ timer_create(alarm_clock_id, &se, &tm1);
+
+ clock_gettime(alarm_clock_id, &start_time);
+ printf("Start time (%s): %ld:%ld\n", clockstring(alarm_clock_id),
+ start_time.tv_sec, start_time.tv_nsec);
+ printf("Setting alarm for every %i seconds\n", SUSPEND_SECS);
+ its1.it_value = start_time;
+ its1.it_value.tv_sec += SUSPEND_SECS;
+ its1.it_interval.tv_sec = SUSPEND_SECS;
+ its1.it_interval.tv_nsec = 0;
+
+ timer_settime(tm1, TIMER_ABSTIME, &its1, &its2);
+
+ while (alarmcount < 5)
+ sleep(1); /* First 5 alarms, do nothing */
+
+ printf("Starting suspend loops\n");
+ while (alarmcount < 10) {
+ int ret;
+
+ sleep(1);
+ ret = system("echo mem > /sys/power/state");
+ if (ret)
+ break;
+ }
+ timer_delete(tm1);
+ }
+ if (final_ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/change_skew.c b/tools/testing/selftests/timers/change_skew.c
new file mode 100644
index 000000000000..cb1968977c04
--- /dev/null
+++ b/tools/testing/selftests/timers/change_skew.c
@@ -0,0 +1,107 @@
+/* ADJ_FREQ Skew change test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which cranks the ADJ_FREQ knob and
+ * then uses other tests to detect problems. Thus this test requires
+ * that the raw_skew, inconsistency-check and nanosleep tests be
+ * present in the same directory it is run from.
+ *
+ * To build:
+ * $ gcc change_skew.c -o change_skew -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+
+int change_skew_test(int ppm)
+{
+ struct timex tx;
+ int ret;
+
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = ppm << 16;
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("Error adjusting freq\n");
+ return ret;
+ }
+
+ ret = system("./raw_skew");
+ ret |= system("./inconsistency-check");
+ ret |= system("./nanosleep");
+
+ return ret;
+}
+
+
+int main(int argv, char **argc)
+{
+ struct timex tx;
+ int i, ret;
+
+ int ppm[5] = {0, 250, 500, -250, -500};
+
+ /* Kill ntpd */
+ ret = system("killall -9 ntpd");
+
+ /* Make sure there's no offset adjustment going on */
+ tx.modes = ADJ_OFFSET;
+ tx.offset = 0;
+ ret = adjtimex(&tx);
+
+ if (ret < 0) {
+ printf("Maybe you're not running as root?\n");
+ return -1;
+ }
+
+ for (i = 0; i < 5; i++) {
+ printf("Using %i ppm adjustment\n", ppm[i]);
+ ret = change_skew_test(ppm[i]);
+ if (ret)
+ break;
+ }
+
+ /* Set things back */
+ tx.modes = ADJ_FREQUENCY;
+ tx.offset = 0;
+ adjtimex(&tx);
+
+ if (ret) {
+ printf("[FAIL]");
+ return ksft_exit_fail();
+ }
+ printf("[OK]");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c
new file mode 100644
index 000000000000..627ec7425f78
--- /dev/null
+++ b/tools/testing/selftests/timers/clocksource-switch.c
@@ -0,0 +1,179 @@
+/* Clocksource change test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which quickly changes the clocksourc and
+ * then uses other tests to detect problems. Thus this test requires
+ * that the inconsistency-check and nanosleep tests be present in the
+ * same directory it is run from.
+ *
+ * To build:
+ * $ gcc clocksource-switch.c -o clocksource-switch -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/wait.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+int get_clocksources(char list[][30])
+{
+ int fd, i;
+ size_t size;
+ char buf[512];
+ char *head, *tmp;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/available_clocksource", O_RDONLY);
+
+ size = read(fd, buf, 512);
+
+ close(fd);
+
+ for (i = 0; i < 30; i++)
+ list[i][0] = '\0';
+
+ head = buf;
+ i = 0;
+ while (head - buf < size) {
+ /* Find the next space */
+ for (tmp = head; *tmp != ' '; tmp++) {
+ if (*tmp == '\n')
+ break;
+ if (*tmp == '\0')
+ break;
+ }
+ *tmp = '\0';
+ strcpy(list[i], head);
+ head = tmp + 1;
+ i++;
+ }
+
+ return i-1;
+}
+
+int get_cur_clocksource(char *buf, size_t size)
+{
+ int fd;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_RDONLY);
+
+ size = read(fd, buf, size);
+
+ return 0;
+}
+
+int change_clocksource(char *clocksource)
+{
+ int fd;
+ size_t size;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_WRONLY);
+
+ if (fd < 0)
+ return -1;
+
+ size = write(fd, clocksource, strlen(clocksource));
+
+ if (size < 0)
+ return -1;
+
+ close(fd);
+ return 0;
+}
+
+
+int run_tests(int secs)
+{
+ int ret;
+ char buf[255];
+
+ sprintf(buf, "./inconsistency-check -t %i", secs);
+ ret = system(buf);
+ if (ret)
+ return ret;
+ ret = system("./nanosleep");
+ return ret;
+}
+
+
+char clocksource_list[10][30];
+
+int main(int argv, char **argc)
+{
+ char orig_clk[512];
+ int count, i, status;
+ pid_t pid;
+
+ get_cur_clocksource(orig_clk, 512);
+
+ count = get_clocksources(clocksource_list);
+
+ if (change_clocksource(clocksource_list[0])) {
+ printf("Error: You probably need to run this as root\n");
+ return -1;
+ }
+
+ /* Check everything is sane before we start switching asyncrhonously */
+ for (i = 0; i < count; i++) {
+ printf("Validating clocksource %s\n", clocksource_list[i]);
+ if (change_clocksource(clocksource_list[i])) {
+ status = -1;
+ goto out;
+ }
+ if (run_tests(5)) {
+ status = -1;
+ goto out;
+ }
+ }
+
+
+ printf("Running Asyncrhonous Switching Tests...\n");
+ pid = fork();
+ if (!pid)
+ return run_tests(60);
+
+ while (pid != waitpid(pid, &status, WNOHANG))
+ for (i = 0; i < count; i++)
+ if (change_clocksource(clocksource_list[i])) {
+ status = -1;
+ goto out;
+ }
+out:
+ change_clocksource(orig_clk);
+
+ if (status)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/inconsistency-check.c b/tools/testing/selftests/timers/inconsistency-check.c
new file mode 100644
index 000000000000..caf1bc9257c4
--- /dev/null
+++ b/tools/testing/selftests/timers/inconsistency-check.c
@@ -0,0 +1,204 @@
+/* Time inconsistency check test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2003, 2004, 2005, 2012
+ * (C) Copyright Linaro Limited 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc inconsistency-check.c -o inconsistency-check -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CALLS_PER_LOOP 64
+#define NSEC_PER_SEC 1000000000ULL
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ /* use unsigned to avoid false positives on 2038 rollover */
+ if ((unsigned long)a.tv_sec < (unsigned long)b.tv_sec)
+ return 1;
+ if ((unsigned long)a.tv_sec > (unsigned long)b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+
+
+int consistency_test(int clock_type, unsigned long seconds)
+{
+ struct timespec list[CALLS_PER_LOOP];
+ int i, inconsistent;
+ long now, then;
+ time_t t;
+ char *start_str;
+
+ clock_gettime(clock_type, &list[0]);
+ now = then = list[0].tv_sec;
+
+ /* timestamp start of test */
+ t = time(0);
+ start_str = ctime(&t);
+
+ while (seconds == -1 || now - then < seconds) {
+ inconsistent = 0;
+
+ /* Fill list */
+ for (i = 0; i < CALLS_PER_LOOP; i++)
+ clock_gettime(clock_type, &list[i]);
+
+ /* Check for inconsistencies */
+ for (i = 0; i < CALLS_PER_LOOP - 1; i++)
+ if (!in_order(list[i], list[i+1]))
+ inconsistent = i;
+
+ /* display inconsistency */
+ if (inconsistent) {
+ unsigned long long delta;
+
+ printf("\%s\n", start_str);
+ for (i = 0; i < CALLS_PER_LOOP; i++) {
+ if (i == inconsistent)
+ printf("--------------------\n");
+ printf("%lu:%lu\n", list[i].tv_sec,
+ list[i].tv_nsec);
+ if (i == inconsistent + 1)
+ printf("--------------------\n");
+ }
+ delta = list[inconsistent].tv_sec * NSEC_PER_SEC;
+ delta += list[inconsistent].tv_nsec;
+ delta -= list[inconsistent+1].tv_sec * NSEC_PER_SEC;
+ delta -= list[inconsistent+1].tv_nsec;
+ printf("Delta: %llu ns\n", delta);
+ fflush(0);
+ /* timestamp inconsistency*/
+ t = time(0);
+ printf("%s\n", ctime(&t));
+ printf("[FAILED]\n");
+ return -1;
+ }
+ now = list[0].tv_sec;
+ }
+ printf("[OK]\n");
+ return 0;
+}
+
+
+int main(int argc, char *argv[])
+{
+ int clockid, opt;
+ int userclock = CLOCK_REALTIME;
+ int maxclocks = NR_CLOCKIDS;
+ int runtime = 10;
+ struct timespec ts;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "t:c:")) != -1) {
+ switch (opt) {
+ case 't':
+ runtime = atoi(optarg);
+ break;
+ case 'c':
+ userclock = atoi(optarg);
+ maxclocks = userclock + 1;
+ break;
+ default:
+ printf("Usage: %s [-t <secs>] [-c <clockid>]\n", argv[0]);
+ printf(" -t: Number of seconds to run\n");
+ printf(" -c: clockid to use (default, all clockids)\n");
+ exit(-1);
+ }
+ }
+
+ setbuf(stdout, NULL);
+
+ for (clockid = userclock; clockid < maxclocks; clockid++) {
+
+ if (clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ if (!clock_gettime(clockid, &ts)) {
+ printf("Consistent %-30s ", clockstring(clockid));
+ if (consistency_test(clockid, runtime))
+ return ksft_exit_fail();
+ }
+ }
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/leap-a-day.c b/tools/testing/selftests/timers/leap-a-day.c
new file mode 100644
index 000000000000..b8272e6c4b3b
--- /dev/null
+++ b/tools/testing/selftests/timers/leap-a-day.c
@@ -0,0 +1,319 @@
+/* Leap second stress test
+ * by: John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright 2013, 2015 Linaro Limited
+ * Licensed under the GPLv2
+ *
+ * This test signals the kernel to insert a leap second
+ * every day at midnight GMT. This allows for stessing the
+ * kernel's leap-second behavior, as well as how well applications
+ * handle the leap-second discontinuity.
+ *
+ * Usage: leap-a-day [-s] [-i <num>]
+ *
+ * Options:
+ * -s: Each iteration, set the date to 10 seconds before midnight GMT.
+ * This speeds up the number of leapsecond transitions tested,
+ * but because it calls settimeofday frequently, advancing the
+ * time by 24 hours every ~16 seconds, it may cause application
+ * disruption.
+ *
+ * -i: Number of iterations to run (default: infinite)
+ *
+ * Other notes: Disabling NTP prior to running this is advised, as the two
+ * may conflict in their commands to the kernel.
+ *
+ * To build:
+ * $ gcc leap-a-day.c -o leap-a-day -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+#define CLOCK_TAI 11
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ if (a.tv_sec < b.tv_sec)
+ return 1;
+ if (a.tv_sec > b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+char *time_state_str(int state)
+{
+ switch (state) {
+ case TIME_OK: return "TIME_OK";
+ case TIME_INS: return "TIME_INS";
+ case TIME_DEL: return "TIME_DEL";
+ case TIME_OOP: return "TIME_OOP";
+ case TIME_WAIT: return "TIME_WAIT";
+ case TIME_BAD: return "TIME_BAD";
+ }
+ return "ERROR";
+}
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ /*
+ * We have to call adjtime twice here, as kernels
+ * prior to 6b1859dba01c7 (included in 3.5 and
+ * -stable), had an issue with the state machine
+ * and wouldn't clear the STA_INS/DEL flag directly.
+ */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_PLL;
+ ret = adjtimex(&tx);
+
+ /* Clear maxerror, as it can cause UNSYNC to be set */
+ tx.modes = ADJ_MAXERROR;
+ tx.maxerror = 0;
+ ret = adjtimex(&tx);
+
+ /* Clear the status */
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+
+ return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+ clear_time_state();
+ exit(0);
+}
+
+/* Test for known hrtimer failure */
+void test_hrtimer_failure(void)
+{
+ struct timespec now, target;
+
+ clock_gettime(CLOCK_REALTIME, &now);
+ target = timespec_add(now, NSEC_PER_SEC/2);
+ clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &target, NULL);
+ clock_gettime(CLOCK_REALTIME, &now);
+
+ if (!in_order(target, now))
+ printf("ERROR: hrtimer early expiration failure observed.\n");
+}
+
+int main(int argc, char **argv)
+{
+ int settime = 0;
+ int tai_time = 0;
+ int insert = 1;
+ int iterations = -1;
+ int opt;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "sti:")) != -1) {
+ switch (opt) {
+ case 's':
+ printf("Setting time to speed up testing\n");
+ settime = 1;
+ break;
+ case 'i':
+ iterations = atoi(optarg);
+ break;
+ case 't':
+ tai_time = 1;
+ break;
+ default:
+ printf("Usage: %s [-s] [-i <iterations>]\n", argv[0]);
+ printf(" -s: Set time to right before leap second each iteration\n");
+ printf(" -i: Number of iterations\n");
+ printf(" -t: Print TAI time\n");
+ exit(-1);
+ }
+ }
+
+ /* Make sure TAI support is present if -t was used */
+ if (tai_time) {
+ struct timespec ts;
+
+ if (clock_gettime(CLOCK_TAI, &ts)) {
+ printf("System doesn't support CLOCK_TAI\n");
+ ksft_exit_fail();
+ }
+ }
+
+ signal(SIGINT, handler);
+ signal(SIGKILL, handler);
+
+ if (iterations < 0)
+ printf("This runs continuously. Press ctrl-c to stop\n");
+ else
+ printf("Running for %i iterations. Press ctrl-c to stop\n", iterations);
+
+ printf("\n");
+ while (1) {
+ int ret;
+ struct timespec ts;
+ struct timex tx;
+ time_t now, next_leap;
+
+ /* Get the current time */
+ clock_gettime(CLOCK_REALTIME, &ts);
+
+ /* Calculate the next possible leap second 23:59:60 GMT */
+ next_leap = ts.tv_sec;
+ next_leap += 86400 - (next_leap % 86400);
+
+ if (settime) {
+ struct timeval tv;
+
+ tv.tv_sec = next_leap - 10;
+ tv.tv_usec = 0;
+ settimeofday(&tv, NULL);
+ printf("Setting time to %s", ctime(&tv.tv_sec));
+ }
+
+ /* Reset NTP time state */
+ clear_time_state();
+
+ /* Set the leap second insert flag */
+ tx.modes = ADJ_STATUS;
+ if (insert)
+ tx.status = STA_INS;
+ else
+ tx.status = STA_DEL;
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("Error: Problem setting STA_INS/STA_DEL!: %s\n",
+ time_state_str(ret));
+ return ksft_exit_fail();
+ }
+
+ /* Validate STA_INS was set */
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.status != STA_INS && tx.status != STA_DEL) {
+ printf("Error: STA_INS/STA_DEL not set!: %s\n",
+ time_state_str(ret));
+ return ksft_exit_fail();
+ }
+
+ if (tai_time) {
+ printf("Using TAI time,"
+ " no inconsistencies should be seen!\n");
+ }
+
+ printf("Scheduling leap second for %s", ctime(&next_leap));
+
+ /* Wake up 3 seconds before leap */
+ ts.tv_sec = next_leap - 3;
+ ts.tv_nsec = 0;
+
+ while (clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &ts, NULL))
+ printf("Something woke us up, returning to sleep\n");
+
+ /* Validate STA_INS is still set */
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.status != STA_INS && tx.status != STA_DEL) {
+ printf("Something cleared STA_INS/STA_DEL, setting it again.\n");
+ tx.modes = ADJ_STATUS;
+ if (insert)
+ tx.status = STA_INS;
+ else
+ tx.status = STA_DEL;
+ ret = adjtimex(&tx);
+ }
+
+ /* Check adjtimex output every half second */
+ now = tx.time.tv_sec;
+ while (now < next_leap + 2) {
+ char buf[26];
+ struct timespec tai;
+
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+
+ if (tai_time) {
+ clock_gettime(CLOCK_TAI, &tai);
+ printf("%ld sec, %9ld ns\t%s\n",
+ tai.tv_sec,
+ tai.tv_nsec,
+ time_state_str(ret));
+ } else {
+ ctime_r(&tx.time.tv_sec, buf);
+ buf[strlen(buf)-1] = 0; /*remove trailing\n */
+
+ printf("%s + %6ld us (%i)\t%s\n",
+ buf,
+ tx.time.tv_usec,
+ tx.tai,
+ time_state_str(ret));
+ }
+ now = tx.time.tv_sec;
+ /* Sleep for another half second */
+ ts.tv_sec = 0;
+ ts.tv_nsec = NSEC_PER_SEC / 2;
+ clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL);
+ }
+ /* Switch to using other mode */
+ insert = !insert;
+
+ /* Note if kernel has known hrtimer failure */
+ test_hrtimer_failure();
+
+ printf("Leap complete\n\n");
+
+ if ((iterations != -1) && !(--iterations))
+ break;
+ }
+
+ clear_time_state();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c
new file mode 100644
index 000000000000..a1071bdbdeb7
--- /dev/null
+++ b/tools/testing/selftests/timers/leapcrash.c
@@ -0,0 +1,120 @@
+/* Demo leapsecond deadlock
+ * by: John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright 2013, 2015 Linaro Limited
+ * Licensed under the GPL
+ *
+ * This test demonstrates leapsecond deadlock that is possibe
+ * on kernels from 2.6.26 to 3.3.
+ *
+ * WARNING: THIS WILL LIKELY HARDHANG SYSTEMS AND MAY LOSE DATA
+ * RUN AT YOUR OWN RISK!
+ * To build:
+ * $ gcc leapcrash.c -o leapcrash -lrt
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ /*
+ * We have to call adjtime twice here, as kernels
+ * prior to 6b1859dba01c7 (included in 3.5 and
+ * -stable), had an issue with the state machine
+ * and wouldn't clear the STA_INS/DEL flag directly.
+ */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_PLL;
+ ret = adjtimex(&tx);
+
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+
+ return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+ clear_time_state();
+ exit(0);
+}
+
+
+int main(void)
+{
+ struct timex tx;
+ struct timespec ts;
+ time_t next_leap;
+ int count = 0;
+
+ setbuf(stdout, NULL);
+
+ signal(SIGINT, handler);
+ signal(SIGKILL, handler);
+ printf("This runs for a few minutes. Press ctrl-c to stop\n");
+
+ clear_time_state();
+
+
+ /* Get the current time */
+ clock_gettime(CLOCK_REALTIME, &ts);
+
+ /* Calculate the next possible leap second 23:59:60 GMT */
+ next_leap = ts.tv_sec;
+ next_leap += 86400 - (next_leap % 86400);
+
+ for (count = 0; count < 20; count++) {
+ struct timeval tv;
+
+
+ /* set the time to 2 seconds before the leap */
+ tv.tv_sec = next_leap - 2;
+ tv.tv_usec = 0;
+ if (settimeofday(&tv, NULL)) {
+ printf("Error: You're likely not running with proper (ie: root) permissions\n");
+ return ksft_exit_fail();
+ }
+ tx.modes = 0;
+ adjtimex(&tx);
+
+ /* hammer on adjtime w/ STA_INS */
+ while (tx.time.tv_sec < next_leap + 1) {
+ /* Set the leap second insert flag */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_INS;
+ adjtimex(&tx);
+ }
+ clear_time_state();
+ printf(".");
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c
new file mode 100644
index 000000000000..a2a3924d0b41
--- /dev/null
+++ b/tools/testing/selftests/timers/mqueue-lat.c
@@ -0,0 +1,124 @@
+/* Measure mqueue timeout latency
+ * by: john stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ *
+ * Inspired with permission from example test by:
+ * Romain Francoise <romain@orebokech.com>
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc mqueue-lat.c -o mqueue-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <errno.h>
+#include <mqueue.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define TARGET_TIMEOUT 100000000 /* 100ms in nanoseconds */
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+int mqueue_lat_test(void)
+{
+
+ mqd_t q;
+ struct mq_attr attr;
+ struct timespec start, end, now, target;
+ int i, count, ret;
+
+ q = mq_open("/foo", O_CREAT | O_RDONLY, 0666, NULL);
+ if (q < 0) {
+ perror("mq_open");
+ return -1;
+ }
+ mq_getattr(q, &attr);
+
+
+ count = 100;
+ clock_gettime(CLOCK_MONOTONIC, &start);
+
+ for (i = 0; i < count; i++) {
+ char buf[attr.mq_msgsize];
+
+ clock_gettime(CLOCK_REALTIME, &now);
+ target = now;
+ target = timespec_add(now, TARGET_TIMEOUT); /* 100ms */
+
+ ret = mq_timedreceive(q, buf, sizeof(buf), NULL, &target);
+ if (ret < 0 && errno != ETIMEDOUT) {
+ perror("mq_timedreceive");
+ return -1;
+ }
+ }
+ clock_gettime(CLOCK_MONOTONIC, &end);
+
+ mq_close(q);
+
+ if ((timespec_sub(start, end)/count) > TARGET_TIMEOUT + UNRESONABLE_LATENCY)
+ return -1;
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+
+ printf("Mqueue latency : ");
+
+ ret = mqueue_lat_test();
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c
new file mode 100644
index 000000000000..8a3c29de7d49
--- /dev/null
+++ b/tools/testing/selftests/timers/nanosleep.c
@@ -0,0 +1,174 @@
+/* Make sure timers don't return early
+ * by: john stultz (johnstul@us.ibm.com)
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright Linaro 2013 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc nanosleep.c -o nanosleep -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+#define UNSUPPORTED 0xf00f
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ if (a.tv_sec < b.tv_sec)
+ return 1;
+ if (a.tv_sec > b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+int nanosleep_test(int clockid, long long ns)
+{
+ struct timespec now, target, rel;
+
+ /* First check abs time */
+ if (clock_gettime(clockid, &now))
+ return UNSUPPORTED;
+ target = timespec_add(now, ns);
+
+ if (clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL))
+ return UNSUPPORTED;
+ clock_gettime(clockid, &now);
+
+ if (!in_order(target, now))
+ return -1;
+
+ /* Second check reltime */
+ clock_gettime(clockid, &now);
+ rel.tv_sec = 0;
+ rel.tv_nsec = 0;
+ rel = timespec_add(rel, ns);
+ target = timespec_add(now, ns);
+ clock_nanosleep(clockid, 0, &rel, NULL);
+ clock_gettime(clockid, &now);
+
+ if (!in_order(target, now))
+ return -1;
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ long long length;
+ int clockid, ret;
+
+ for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) {
+
+ /* Skip cputime clockids since nanosleep won't increment cputime */
+ if (clockid == CLOCK_PROCESS_CPUTIME_ID ||
+ clockid == CLOCK_THREAD_CPUTIME_ID ||
+ clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ printf("Nanosleep %-31s ", clockstring(clockid));
+
+ length = 10;
+ while (length <= (NSEC_PER_SEC * 10)) {
+ ret = nanosleep_test(clockid, length);
+ if (ret == UNSUPPORTED) {
+ printf("[UNSUPPORTED]\n");
+ goto next;
+ }
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ length *= 100;
+ }
+ printf("[OK]\n");
+next:
+ ret = 0;
+ }
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c
new file mode 100644
index 000000000000..2d7898fda0f1
--- /dev/null
+++ b/tools/testing/selftests/timers/nsleep-lat.c
@@ -0,0 +1,190 @@
+/* Measure nanosleep timer latency
+ * by: john stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc nsleep-lat.c -o nsleep-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+#define UNSUPPORTED 0xf00f
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int nanosleep_lat_test(int clockid, long long ns)
+{
+ struct timespec start, end, target;
+ long long latency = 0;
+ int i, count;
+
+ target.tv_sec = ns/NSEC_PER_SEC;
+ target.tv_nsec = ns%NSEC_PER_SEC;
+
+ if (clock_gettime(clockid, &start))
+ return UNSUPPORTED;
+ if (clock_nanosleep(clockid, 0, &target, NULL))
+ return UNSUPPORTED;
+
+ count = 10;
+
+ /* First check relative latency */
+ clock_gettime(clockid, &start);
+ for (i = 0; i < count; i++)
+ clock_nanosleep(clockid, 0, &target, NULL);
+ clock_gettime(clockid, &end);
+
+ if (((timespec_sub(start, end)/count)-ns) > UNRESONABLE_LATENCY) {
+ printf("Large rel latency: %lld ns :", (timespec_sub(start, end)/count)-ns);
+ return -1;
+ }
+
+ /* Next check absolute latency */
+ for (i = 0; i < count; i++) {
+ clock_gettime(clockid, &start);
+ target = timespec_add(start, ns);
+ clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL);
+ clock_gettime(clockid, &end);
+ latency += timespec_sub(target, end);
+ }
+
+ if (latency/count > UNRESONABLE_LATENCY) {
+ printf("Large abs latency: %lld ns :", latency/count);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+
+int main(int argc, char **argv)
+{
+ long long length;
+ int clockid, ret;
+
+ for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) {
+
+ /* Skip cputime clockids since nanosleep won't increment cputime */
+ if (clockid == CLOCK_PROCESS_CPUTIME_ID ||
+ clockid == CLOCK_THREAD_CPUTIME_ID ||
+ clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ printf("nsleep latency %-26s ", clockstring(clockid));
+
+ length = 10;
+ while (length <= (NSEC_PER_SEC * 10)) {
+ ret = nanosleep_lat_test(clockid, length);
+ if (ret)
+ break;
+ length *= 100;
+
+ }
+
+ if (ret == UNSUPPORTED) {
+ printf("[UNSUPPORTED]\n");
+ continue;
+ }
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ }
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
index f87d970a485c..5a246a02dff3 100644
--- a/tools/testing/selftests/timers/posix_timers.c
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -35,10 +35,11 @@ static void user_loop(void)
static void kernel_loop(void)
{
void *addr = sbrk(0);
+ int err = 0;
- while (!done) {
- brk(addr + 4096);
- brk(addr);
+ while (!done && !err) {
+ err = brk(addr + 4096);
+ err |= brk(addr);
}
}
@@ -190,8 +191,6 @@ static int check_timer_create(int which)
int main(int argc, char **argv)
{
- int err;
-
printf("Testing posix timers. False negative may happen on CPU execution \n");
printf("based timers if other threads run on the CPU...\n");
diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c
new file mode 100644
index 000000000000..30906bfd9c1b
--- /dev/null
+++ b/tools/testing/selftests/timers/raw_skew.c
@@ -0,0 +1,154 @@
+/* CLOCK_MONOTONIC vs CLOCK_MONOTONIC_RAW skew test
+ * by: john stultz (johnstul@us.ibm.com)
+ * John Stultz <john.stultz@linaro.org>
+ * (C) Copyright IBM 2012
+ * (C) Copyright Linaro Limited 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc raw_skew.c -o raw_skew -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+#define CLOCK_MONOTONIC_RAW 4
+#define NSEC_PER_SEC 1000000000LL
+
+#define shift_right(x, s) ({ \
+ __typeof__(x) __x = (x); \
+ __typeof__(s) __s = (s); \
+ __x < 0 ? -(-__x >> __s) : __x >> __s; \
+})
+
+long long llabs(long long val)
+{
+ if (val < 0)
+ val = -val;
+ return val;
+}
+
+unsigned long long ts_to_nsec(struct timespec ts)
+{
+ return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
+}
+
+struct timespec nsec_to_ts(long long ns)
+{
+ struct timespec ts;
+
+ ts.tv_sec = ns/NSEC_PER_SEC;
+ ts.tv_nsec = ns%NSEC_PER_SEC;
+ return ts;
+}
+
+long long diff_timespec(struct timespec start, struct timespec end)
+{
+ long long start_ns, end_ns;
+
+ start_ns = ts_to_nsec(start);
+ end_ns = ts_to_nsec(end);
+ return end_ns - start_ns;
+}
+
+void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
+{
+ struct timespec start, mid, end;
+ long long diff = 0, tmp;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ long long newdiff;
+
+ clock_gettime(CLOCK_MONOTONIC, &start);
+ clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
+ clock_gettime(CLOCK_MONOTONIC, &end);
+
+ newdiff = diff_timespec(start, end);
+ if (diff == 0 || newdiff < diff) {
+ diff = newdiff;
+ *raw = mid;
+ tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
+ *mon = nsec_to_ts(tmp);
+ }
+ }
+}
+
+int main(int argv, char **argc)
+{
+ struct timespec mon, raw, start, end;
+ long long delta1, delta2, interval, eppm, ppm;
+ struct timex tx1, tx2;
+
+ setbuf(stdout, NULL);
+
+ if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
+ printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
+ return -1;
+ }
+
+ tx1.modes = 0;
+ adjtimex(&tx1);
+ get_monotonic_and_raw(&mon, &raw);
+ start = mon;
+ delta1 = diff_timespec(mon, raw);
+
+ if (tx1.offset)
+ printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n");
+
+ printf("Estimating clock drift: ");
+ sleep(120);
+
+ get_monotonic_and_raw(&mon, &raw);
+ end = mon;
+ tx2.modes = 0;
+ adjtimex(&tx2);
+ delta2 = diff_timespec(mon, raw);
+
+ interval = diff_timespec(start, end);
+
+ /* calculate measured ppm between MONOTONIC and MONOTONIC_RAW */
+ eppm = ((delta2-delta1)*NSEC_PER_SEC)/interval;
+ eppm = -eppm;
+ printf("%lld.%i(est)", eppm/1000, abs((int)(eppm%1000)));
+
+ /* Avg the two actual freq samples adjtimex gave us */
+ ppm = (tx1.freq + tx2.freq) * 1000 / 2;
+ ppm = (long long)tx1.freq * 1000;
+ ppm = shift_right(ppm, 16);
+ printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000)));
+
+ if (llabs(eppm - ppm) > 1000) {
+ printf(" [FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf(" [OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/rtctest.c b/tools/testing/selftests/timers/rtctest.c
new file mode 100644
index 000000000000..d80ae852334d
--- /dev/null
+++ b/tools/testing/selftests/timers/rtctest.c
@@ -0,0 +1,271 @@
+/*
+ * Real Time Clock Driver Test/Example Program
+ *
+ * Compile with:
+ * gcc -s -Wall -Wstrict-prototypes rtctest.c -o rtctest
+ *
+ * Copyright (C) 1996, Paul Gortmaker.
+ *
+ * Released under the GNU General Public License, version 2,
+ * included herein by reference.
+ *
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+
+
+/*
+ * This expects the new RTC class driver framework, working with
+ * clocks that will often not be clones of what the PC-AT had.
+ * Use the command line to specify another RTC if you need one.
+ */
+static const char default_rtc[] = "/dev/rtc0";
+
+
+int main(int argc, char **argv)
+{
+ int i, fd, retval, irqcount = 0;
+ unsigned long tmp, data;
+ struct rtc_time rtc_tm;
+ const char *rtc = default_rtc;
+ struct timeval start, end, diff;
+
+ switch (argc) {
+ case 2:
+ rtc = argv[1];
+ /* FALLTHROUGH */
+ case 1:
+ break;
+ default:
+ fprintf(stderr, "usage: rtctest [rtcdev]\n");
+ return 1;
+ }
+
+ fd = open(rtc, O_RDONLY);
+
+ if (fd == -1) {
+ perror(rtc);
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\t\t\tRTC Driver Test Example.\n\n");
+
+ /* Turn on update interrupts (one per second) */
+ retval = ioctl(fd, RTC_UIE_ON, 0);
+ if (retval == -1) {
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Update IRQs not supported.\n");
+ goto test_READ;
+ }
+ perror("RTC_UIE_ON ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Counting 5 update (1/sec) interrupts from reading %s:",
+ rtc);
+ fflush(stderr);
+ for (i=1; i<6; i++) {
+ /* This read will block */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ fprintf(stderr, "\nAgain, from using select(2) on /dev/rtc:");
+ fflush(stderr);
+ for (i=1; i<6; i++) {
+ struct timeval tv = {5, 0}; /* 5 second timeout on select */
+ fd_set readfds;
+
+ FD_ZERO(&readfds);
+ FD_SET(fd, &readfds);
+ /* The select will wait until an RTC interrupt happens. */
+ retval = select(fd+1, &readfds, NULL, NULL, &tv);
+ if (retval == -1) {
+ perror("select");
+ exit(errno);
+ }
+ /* This read won't block unlike the select-less case above. */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ /* Turn off update interrupts */
+ retval = ioctl(fd, RTC_UIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_UIE_OFF ioctl");
+ exit(errno);
+ }
+
+test_READ:
+ /* Read the RTC time/date */
+ retval = ioctl(fd, RTC_RD_TIME, &rtc_tm);
+ if (retval == -1) {
+ perror("RTC_RD_TIME ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n",
+ rtc_tm.tm_mday, rtc_tm.tm_mon + 1, rtc_tm.tm_year + 1900,
+ rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec);
+
+ /* Set the alarm to 5 sec in the future, and check for rollover */
+ rtc_tm.tm_sec += 5;
+ if (rtc_tm.tm_sec >= 60) {
+ rtc_tm.tm_sec %= 60;
+ rtc_tm.tm_min++;
+ }
+ if (rtc_tm.tm_min == 60) {
+ rtc_tm.tm_min = 0;
+ rtc_tm.tm_hour++;
+ }
+ if (rtc_tm.tm_hour == 24)
+ rtc_tm.tm_hour = 0;
+
+ retval = ioctl(fd, RTC_ALM_SET, &rtc_tm);
+ if (retval == -1) {
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Alarm IRQs not supported.\n");
+ goto test_PIE;
+ }
+ perror("RTC_ALM_SET ioctl");
+ exit(errno);
+ }
+
+ /* Read the current alarm settings */
+ retval = ioctl(fd, RTC_ALM_READ, &rtc_tm);
+ if (retval == -1) {
+ perror("RTC_ALM_READ ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Alarm time now set to %02d:%02d:%02d.\n",
+ rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec);
+
+ /* Enable alarm interrupts */
+ retval = ioctl(fd, RTC_AIE_ON, 0);
+ if (retval == -1) {
+ perror("RTC_AIE_ON ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Waiting 5 seconds for alarm...");
+ fflush(stderr);
+ /* This blocks until the alarm ring causes an interrupt */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ irqcount++;
+ fprintf(stderr, " okay. Alarm rang.\n");
+
+ /* Disable alarm interrupts */
+ retval = ioctl(fd, RTC_AIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_AIE_OFF ioctl");
+ exit(errno);
+ }
+
+test_PIE:
+ /* Read periodic IRQ rate */
+ retval = ioctl(fd, RTC_IRQP_READ, &tmp);
+ if (retval == -1) {
+ /* not all RTCs support periodic IRQs */
+ if (errno == ENOTTY) {
+ fprintf(stderr, "\nNo periodic IRQ support\n");
+ goto done;
+ }
+ perror("RTC_IRQP_READ ioctl");
+ exit(errno);
+ }
+ fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", tmp);
+
+ fprintf(stderr, "Counting 20 interrupts at:");
+ fflush(stderr);
+
+ /* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */
+ for (tmp=2; tmp<=64; tmp*=2) {
+
+ retval = ioctl(fd, RTC_IRQP_SET, tmp);
+ if (retval == -1) {
+ /* not all RTCs can change their periodic IRQ rate */
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Periodic IRQ rate is fixed\n");
+ goto done;
+ }
+ perror("RTC_IRQP_SET ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n%ldHz:\t", tmp);
+ fflush(stderr);
+
+ /* Enable periodic interrupts */
+ retval = ioctl(fd, RTC_PIE_ON, 0);
+ if (retval == -1) {
+ perror("RTC_PIE_ON ioctl");
+ exit(errno);
+ }
+
+ for (i=1; i<21; i++) {
+ gettimeofday(&start, NULL);
+ /* This blocks */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ gettimeofday(&end, NULL);
+ timersub(&end, &start, &diff);
+ if (diff.tv_sec > 0 ||
+ diff.tv_usec > ((1000000L / tmp) * 1.10)) {
+ fprintf(stderr, "\nPIE delta error: %ld.%06ld should be close to 0.%06ld\n",
+ diff.tv_sec, diff.tv_usec,
+ (1000000L / tmp));
+ fflush(stdout);
+ exit(-1);
+ }
+
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ /* Disable periodic interrupts */
+ retval = ioctl(fd, RTC_PIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_PIE_OFF ioctl");
+ exit(errno);
+ }
+ }
+
+done:
+ fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
+
+ close(fd);
+
+ return 0;
+}
diff --git a/tools/testing/selftests/timers/set-2038.c b/tools/testing/selftests/timers/set-2038.c
new file mode 100644
index 000000000000..c8a7e14446b1
--- /dev/null
+++ b/tools/testing/selftests/timers/set-2038.c
@@ -0,0 +1,144 @@
+/* Time bounds setting test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which sets the time to edge cases then
+ * uses other tests to detect problems. Thus this test requires that
+ * the inconsistency-check and nanosleep tests be present in the same
+ * directory it is run from.
+ *
+ * To build:
+ * $ gcc set-2038.c -o set-2038 -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+#define KTIME_MAX ((long long)~((unsigned long long)1 << 63))
+#define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC)
+
+#define YEAR_1901 (-0x7fffffffL)
+#define YEAR_1970 1
+#define YEAR_2038 0x7fffffffL /*overflows 32bit time_t */
+#define YEAR_2262 KTIME_SEC_MAX /*overflows 64bit ktime_t */
+#define YEAR_MAX ((long long)((1ULL<<63)-1)) /*overflows 64bit time_t */
+
+int is32bits(void)
+{
+ return (sizeof(long) == 4);
+}
+
+int settime(long long time)
+{
+ struct timeval now;
+ int ret;
+
+ now.tv_sec = (time_t)time;
+ now.tv_usec = 0;
+
+ ret = settimeofday(&now, NULL);
+
+ printf("Setting time to 0x%lx: %d\n", (long)time, ret);
+ return ret;
+}
+
+int do_tests(void)
+{
+ int ret;
+
+ ret = system("date");
+ ret = system("./inconsistency-check -c 0 -t 20");
+ ret |= system("./nanosleep");
+ ret |= system("./nsleep-lat");
+ return ret;
+
+}
+
+int main(int argc, char *argv[])
+{
+ int ret = 0;
+ int opt, dangerous = 0;
+ time_t start;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "d")) != -1) {
+ switch (opt) {
+ case 'd':
+ dangerous = 1;
+ }
+ }
+
+ start = time(0);
+
+ /* First test that crazy values don't work */
+ if (!settime(YEAR_1901)) {
+ ret = -1;
+ goto out;
+ }
+ if (!settime(YEAR_MAX)) {
+ ret = -1;
+ goto out;
+ }
+ if (!is32bits() && !settime(YEAR_2262)) {
+ ret = -1;
+ goto out;
+ }
+
+ /* Now test behavior near edges */
+ settime(YEAR_1970);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ settime(YEAR_2038 - 600);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ /* The rest of the tests can blowup on 32bit systems */
+ if (is32bits() && !dangerous)
+ goto out;
+ /* Test rollover behavior 32bit edge */
+ settime(YEAR_2038 - 10);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ settime(YEAR_2262 - 600);
+ ret = do_tests();
+
+out:
+ /* restore clock */
+ settime(start);
+ if (ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c
new file mode 100644
index 000000000000..dc88dbc8831f
--- /dev/null
+++ b/tools/testing/selftests/timers/set-tai.c
@@ -0,0 +1,79 @@
+/* Set tai offset
+ * by: John Stultz <john.stultz@linaro.org>
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+int set_tai(int offset)
+{
+ struct timex tx;
+
+ memset(&tx, 0, sizeof(tx));
+
+ tx.modes = ADJ_TAI;
+ tx.constant = offset;
+
+ return adjtimex(&tx);
+}
+
+int get_tai(void)
+{
+ struct timex tx;
+
+ memset(&tx, 0, sizeof(tx));
+
+ adjtimex(&tx);
+ return tx.tai;
+}
+
+int main(int argc, char **argv)
+{
+ int i, ret;
+
+ ret = get_tai();
+ printf("tai offset started at %i\n", ret);
+
+ printf("Checking tai offsets can be properly set: ");
+ for (i = 1; i <= 60; i++) {
+ ret = set_tai(i);
+ ret = get_tai();
+ if (ret != i) {
+ printf("[FAILED] expected: %i got %i\n", i, ret);
+ return ksft_exit_fail();
+ }
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c
new file mode 100644
index 000000000000..4fc98c5b0899
--- /dev/null
+++ b/tools/testing/selftests/timers/set-timer-lat.c
@@ -0,0 +1,216 @@
+/* set_timer latency test
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2014
+ * Licensed under the GPLv2
+ *
+ * This test makes sure the set_timer api is correct
+ *
+ * To build:
+ * $ gcc set-timer-lat.c -o set-timer-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+
+#define NSEC_PER_SEC 1000000000ULL
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+#define TIMER_SECS 1
+int alarmcount;
+int clock_id;
+struct timespec start_time;
+long long max_latency_ns;
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+
+void sigalarm(int signo)
+{
+ long long delta_ns;
+ struct timespec ts;
+
+ clock_gettime(clock_id, &ts);
+ alarmcount++;
+
+ delta_ns = timespec_sub(start_time, ts);
+ delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount;
+
+ if (delta_ns < 0)
+ printf("%s timer fired early: FAIL\n", clockstring(clock_id));
+
+ if (delta_ns > max_latency_ns)
+ max_latency_ns = delta_ns;
+}
+
+int do_timer(int clock_id, int flags)
+{
+ struct sigevent se;
+ timer_t tm1;
+ struct itimerspec its1, its2;
+ int err;
+
+ /* Set up timer: */
+ memset(&se, 0, sizeof(se));
+ se.sigev_notify = SIGEV_SIGNAL;
+ se.sigev_signo = SIGRTMAX;
+ se.sigev_value.sival_int = 0;
+
+ max_latency_ns = 0;
+ alarmcount = 0;
+
+ err = timer_create(clock_id, &se, &tm1);
+ if (err) {
+ if ((clock_id == CLOCK_REALTIME_ALARM) ||
+ (clock_id == CLOCK_BOOTTIME_ALARM)) {
+ printf("%-22s %s missing CAP_WAKE_ALARM? : [UNSUPPORTED]\n",
+ clockstring(clock_id),
+ flags ? "ABSTIME":"RELTIME");
+ return 0;
+ }
+ printf("%s - timer_create() failed\n", clockstring(clock_id));
+ return -1;
+ }
+
+ clock_gettime(clock_id, &start_time);
+ if (flags) {
+ its1.it_value = start_time;
+ its1.it_value.tv_sec += TIMER_SECS;
+ } else {
+ its1.it_value.tv_sec = TIMER_SECS;
+ its1.it_value.tv_nsec = 0;
+ }
+ its1.it_interval.tv_sec = TIMER_SECS;
+ its1.it_interval.tv_nsec = 0;
+
+ err = timer_settime(tm1, flags, &its1, &its2);
+ if (err) {
+ printf("%s - timer_settime() failed\n", clockstring(clock_id));
+ return -1;
+ }
+
+ while (alarmcount < 5)
+ sleep(1);
+
+ printf("%-22s %s max latency: %10lld ns : ",
+ clockstring(clock_id),
+ flags ? "ABSTIME":"RELTIME",
+ max_latency_ns);
+
+ timer_delete(tm1);
+ if (max_latency_ns < UNRESONABLE_LATENCY) {
+ printf("[OK]\n");
+ return 0;
+ }
+ printf("[FAILED]\n");
+ return -1;
+}
+
+int main(void)
+{
+ struct sigaction act;
+ int signum = SIGRTMAX;
+ int ret = 0;
+
+ /* Set up signal handler: */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = sigalarm;
+ sigaction(signum, &act, NULL);
+
+ printf("Setting timers for every %i seconds\n", TIMER_SECS);
+ for (clock_id = 0; clock_id < NR_CLOCKIDS; clock_id++) {
+
+ if ((clock_id == CLOCK_PROCESS_CPUTIME_ID) ||
+ (clock_id == CLOCK_THREAD_CPUTIME_ID) ||
+ (clock_id == CLOCK_MONOTONIC_RAW) ||
+ (clock_id == CLOCK_REALTIME_COARSE) ||
+ (clock_id == CLOCK_MONOTONIC_COARSE) ||
+ (clock_id == CLOCK_HWSPECIFIC))
+ continue;
+
+ ret |= do_timer(clock_id, TIMER_ABSTIME);
+ ret |= do_timer(clock_id, 0);
+ }
+ if (ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/skew_consistency.c b/tools/testing/selftests/timers/skew_consistency.c
new file mode 100644
index 000000000000..5562f84ee07c
--- /dev/null
+++ b/tools/testing/selftests/timers/skew_consistency.c
@@ -0,0 +1,89 @@
+/* ADJ_FREQ Skew consistency test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which cranks the ADJ_FREQ knob back
+ * and forth and watches for consistency problems. Thus this test requires
+ * that the inconsistency-check tests be present in the same directory it
+ * is run from.
+ *
+ * To build:
+ * $ gcc skew_consistency.c -o skew_consistency -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/wait.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+int main(int argv, char **argc)
+{
+ struct timex tx;
+ int ret, ppm;
+ pid_t pid;
+
+
+ printf("Running Asyncrhonous Frequency Changing Tests...\n");
+
+ pid = fork();
+ if (!pid)
+ return system("./inconsistency-check -c 1 -t 600");
+
+ ppm = 500;
+ ret = 0;
+
+ while (pid != waitpid(pid, &ret, WNOHANG)) {
+ ppm = -ppm;
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = ppm << 16;
+ adjtimex(&tx);
+ usleep(500000);
+ }
+
+ /* Set things back */
+ tx.modes = ADJ_FREQUENCY;
+ tx.offset = 0;
+ adjtimex(&tx);
+
+
+ if (ret) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c
new file mode 100644
index 000000000000..e632e116f05e
--- /dev/null
+++ b/tools/testing/selftests/timers/threadtest.c
@@ -0,0 +1,204 @@
+/* threadtest.c
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2004, 2005, 2006, 2012
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc threadtest.c -o threadtest -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+/* serializes shared list access */
+pthread_mutex_t list_lock = PTHREAD_MUTEX_INITIALIZER;
+/* serializes console output */
+pthread_mutex_t print_lock = PTHREAD_MUTEX_INITIALIZER;
+
+
+#define MAX_THREADS 128
+#define LISTSIZE 128
+
+int done = 0;
+
+struct timespec global_list[LISTSIZE];
+int listcount = 0;
+
+
+void checklist(struct timespec *list, int size)
+{
+ int i, j;
+ struct timespec *a, *b;
+
+ /* scan the list */
+ for (i = 0; i < size-1; i++) {
+ a = &list[i];
+ b = &list[i+1];
+
+ /* look for any time inconsistencies */
+ if ((b->tv_sec <= a->tv_sec) &&
+ (b->tv_nsec < a->tv_nsec)) {
+
+ /* flag other threads */
+ done = 1;
+
+ /*serialize printing to avoid junky output*/
+ pthread_mutex_lock(&print_lock);
+
+ /* dump the list */
+ printf("\n");
+ for (j = 0; j < size; j++) {
+ if (j == i)
+ printf("---------------\n");
+ printf("%lu:%lu\n", list[j].tv_sec, list[j].tv_nsec);
+ if (j == i+1)
+ printf("---------------\n");
+ }
+ printf("[FAILED]\n");
+
+ pthread_mutex_unlock(&print_lock);
+ }
+ }
+}
+
+/* The shared thread shares a global list
+ * that each thread fills while holding the lock.
+ * This stresses clock syncronization across cpus.
+ */
+void *shared_thread(void *arg)
+{
+ while (!done) {
+ /* protect the list */
+ pthread_mutex_lock(&list_lock);
+
+ /* see if we're ready to check the list */
+ if (listcount >= LISTSIZE) {
+ checklist(global_list, LISTSIZE);
+ listcount = 0;
+ }
+ clock_gettime(CLOCK_MONOTONIC, &global_list[listcount++]);
+
+ pthread_mutex_unlock(&list_lock);
+ }
+ return NULL;
+}
+
+
+/* Each independent thread fills in its own
+ * list. This stresses clock_gettime() lock contention.
+ */
+void *independent_thread(void *arg)
+{
+ struct timespec my_list[LISTSIZE];
+ int count;
+
+ while (!done) {
+ /* fill the list */
+ for (count = 0; count < LISTSIZE; count++)
+ clock_gettime(CLOCK_MONOTONIC, &my_list[count]);
+ checklist(my_list, LISTSIZE);
+ }
+ return NULL;
+}
+
+#define DEFAULT_THREAD_COUNT 8
+#define DEFAULT_RUNTIME 30
+
+int main(int argc, char **argv)
+{
+ int thread_count, i;
+ time_t start, now, runtime;
+ char buf[255];
+ pthread_t pth[MAX_THREADS];
+ int opt;
+ void *tret;
+ int ret = 0;
+ void *(*thread)(void *) = shared_thread;
+
+ thread_count = DEFAULT_THREAD_COUNT;
+ runtime = DEFAULT_RUNTIME;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "t:n:i")) != -1) {
+ switch (opt) {
+ case 't':
+ runtime = atoi(optarg);
+ break;
+ case 'n':
+ thread_count = atoi(optarg);
+ break;
+ case 'i':
+ thread = independent_thread;
+ printf("using independent threads\n");
+ break;
+ default:
+ printf("Usage: %s [-t <secs>] [-n <numthreads>] [-i]\n", argv[0]);
+ printf(" -t: time to run\n");
+ printf(" -n: number of threads\n");
+ printf(" -i: use independent threads\n");
+ return -1;
+ }
+ }
+
+ if (thread_count > MAX_THREADS)
+ thread_count = MAX_THREADS;
+
+
+ setbuf(stdout, NULL);
+
+ start = time(0);
+ strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start));
+ printf("%s\n", buf);
+ printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime);
+
+ /* spawn */
+ for (i = 0; i < thread_count; i++)
+ pthread_create(&pth[i], 0, thread, 0);
+
+ while (time(&now) < start + runtime) {
+ sleep(1);
+ if (done) {
+ ret = 1;
+ strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&now));
+ printf("%s\n", buf);
+ goto out;
+ }
+ }
+ printf("[OK]\n");
+ done = 1;
+
+out:
+ /* wait */
+ for (i = 0; i < thread_count; i++)
+ pthread_join(pth[i], &tret);
+
+ /* die */
+ if (ret)
+ ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
new file mode 100644
index 000000000000..e86d937cc22c
--- /dev/null
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -0,0 +1,202 @@
+/* valid adjtimex test
+ * by: John Stultz <john.stultz@linaro.org>
+ * (C) Copyright Linaro 2015
+ * Licensed under the GPLv2
+ *
+ * This test validates adjtimex interface with valid
+ * and invalid test data.
+ *
+ * Usage: valid-adjtimex
+ *
+ * To build:
+ * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000L
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+ return ret;
+}
+
+#define NUM_FREQ_VALID 32
+#define NUM_FREQ_OUTOFRANGE 4
+#define NUM_FREQ_INVALID 2
+
+long valid_freq[NUM_FREQ_VALID] = {
+ -499<<16,
+ -450<<16,
+ -400<<16,
+ -350<<16,
+ -300<<16,
+ -250<<16,
+ -200<<16,
+ -150<<16,
+ -100<<16,
+ -75<<16,
+ -50<<16,
+ -25<<16,
+ -10<<16,
+ -5<<16,
+ -1<<16,
+ -1000,
+ 1<<16,
+ 5<<16,
+ 10<<16,
+ 25<<16,
+ 50<<16,
+ 75<<16,
+ 100<<16,
+ 150<<16,
+ 200<<16,
+ 250<<16,
+ 300<<16,
+ 350<<16,
+ 400<<16,
+ 450<<16,
+ 499<<16,
+};
+
+long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
+ -1000<<16,
+ -550<<16,
+ 550<<16,
+ 1000<<16,
+};
+
+#define LONG_MAX (~0UL>>1)
+#define LONG_MIN (-LONG_MAX - 1)
+
+long invalid_freq[NUM_FREQ_INVALID] = {
+ LONG_MAX,
+ LONG_MIN,
+};
+
+int validate_freq(void)
+{
+ struct timex tx;
+ int ret, pass = 0;
+ int i;
+
+ clear_time_state();
+
+ memset(&tx, 0, sizeof(struct timex));
+ /* Set the leap second insert flag */
+
+ printf("Testing ADJ_FREQ... ");
+ for (i = 0; i < NUM_FREQ_VALID; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = valid_freq[i];
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("[FAIL]\n");
+ printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+ valid_freq[i], valid_freq[i]>>16);
+ pass = -1;
+ goto out;
+ }
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.freq != valid_freq[i]) {
+ printf("Warning: freq value %ld not what we set it (%ld)!\n",
+ tx.freq, valid_freq[i]);
+ }
+ }
+ for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = outofrange_freq[i];
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("[FAIL]\n");
+ printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+ outofrange_freq[i], outofrange_freq[i]>>16);
+ pass = -1;
+ goto out;
+ }
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.freq == outofrange_freq[i]) {
+ printf("[FAIL]\n");
+ printf("ERROR: out of range value %ld actually set!\n",
+ tx.freq);
+ pass = -1;
+ goto out;
+ }
+ }
+
+
+ if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
+ for (i = 0; i < NUM_FREQ_INVALID; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = invalid_freq[i];
+ ret = adjtimex(&tx);
+ if (ret >= 0) {
+ printf("[FAIL]\n");
+ printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
+ invalid_freq[i]);
+ pass = -1;
+ goto out;
+ }
+ }
+ }
+
+ printf("[OK]\n");
+out:
+ /* reset freq to zero */
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = 0;
+ ret = adjtimex(&tx);
+
+ return pass;
+}
+
+
+int main(int argc, char **argv)
+{
+ if (validate_freq())
+ return ksft_exit_fail();
+
+ return ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/user/Makefile b/tools/testing/selftests/user/Makefile
index 12c9d15bab07..d401b63c5b1a 100644
--- a/tools/testing/selftests/user/Makefile
+++ b/tools/testing/selftests/user/Makefile
@@ -3,5 +3,6 @@
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
all:
-run_tests: all
- ./test_user_copy.sh
+TEST_PROGS := test_user_copy.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index 077828c889f1..a5ce9534eb15 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -1,6 +1,5 @@
# Makefile for vm selftests
-CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall
BINARIES = hugepage-mmap hugepage-shm map_hugetlb thuge-gen hugetlbfstest
BINARIES += transhuge-stress
@@ -9,8 +8,10 @@ all: $(BINARIES)
%: %.c
$(CC) $(CFLAGS) -o $@ $^ -lrt
-run_tests: all
- @/bin/sh ./run_vmtests || (echo "vmtests: [FAIL]"; exit 1)
+TEST_PROGS := run_vmtests
+TEST_FILES := $(BINARIES)
+
+include ../lib.mk
clean:
$(RM) $(BINARIES)
diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests
index c87b6812300d..c87b6812300d 100644..100755
--- a/tools/testing/selftests/vm/run_vmtests
+++ b/tools/testing/selftests/vm/run_vmtests
diff --git a/tools/testing/selftests/x86/.gitignore b/tools/testing/selftests/x86/.gitignore
new file mode 100644
index 000000000000..15034fef9698
--- /dev/null
+++ b/tools/testing/selftests/x86/.gitignore
@@ -0,0 +1,2 @@
+*_32
+*_64
diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile
new file mode 100644
index 000000000000..f0a7918178dd
--- /dev/null
+++ b/tools/testing/selftests/x86/Makefile
@@ -0,0 +1,48 @@
+.PHONY: all all_32 all_64 check_build32 clean run_tests
+
+TARGETS_C_BOTHBITS := sigreturn
+
+BINARIES_32 := $(TARGETS_C_BOTHBITS:%=%_32)
+BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64)
+
+CFLAGS := -O2 -g -std=gnu99 -pthread -Wall
+
+UNAME_P := $(shell uname -p)
+
+# Always build 32-bit tests
+all: all_32
+
+# If we're on a 64-bit host, build 64-bit tests as well
+ifeq ($(shell uname -p),x86_64)
+all: all_64
+endif
+
+all_32: check_build32 $(BINARIES_32)
+
+all_64: $(BINARIES_64)
+
+clean:
+ $(RM) $(BINARIES_32) $(BINARIES_64)
+
+run_tests:
+ ./run_x86_tests.sh
+
+$(TARGETS_C_BOTHBITS:%=%_32): %_32: %.c
+ $(CC) -m32 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl
+
+$(TARGETS_C_BOTHBITS:%=%_64): %_64: %.c
+ $(CC) -m64 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl
+
+check_build32:
+ @if ! $(CC) -m32 -o /dev/null trivial_32bit_program.c; then \
+ echo "Warning: you seem to have a broken 32-bit build" 2>&1; \
+ echo "environment. If you are using a Debian-like"; \
+ echo " distribution, try:"; \
+ echo ""; \
+ echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \
+ echo ""; \
+ echo "If you are using a Fedora-like distribution, try:"; \
+ echo ""; \
+ echo " yum install glibc-devel.*i686"; \
+ exit 1; \
+ fi
diff --git a/tools/testing/selftests/x86/run_x86_tests.sh b/tools/testing/selftests/x86/run_x86_tests.sh
new file mode 100644
index 000000000000..3d3ec65f3e7c
--- /dev/null
+++ b/tools/testing/selftests/x86/run_x86_tests.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# This is deliberately minimal. IMO kselftests should provide a standard
+# script here.
+./sigreturn_32 || exit 1
+
+if [[ "$uname -p" -eq "x86_64" ]]; then
+ ./sigreturn_64 || exit 1
+fi
+
+exit 0
diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c
new file mode 100644
index 000000000000..b5aa1bab7416
--- /dev/null
+++ b/tools/testing/selftests/x86/sigreturn.c
@@ -0,0 +1,684 @@
+/*
+ * sigreturn.c - tests for x86 sigreturn(2) and exit-to-userspace
+ * Copyright (c) 2014-2015 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * This is a series of tests that exercises the sigreturn(2) syscall and
+ * the IRET / SYSRET paths in the kernel.
+ *
+ * For now, this focuses on the effects of unusual CS and SS values,
+ * and it has a bunch of tests to make sure that ESP/RSP is restored
+ * properly.
+ *
+ * The basic idea behind these tests is to raise(SIGUSR1) to create a
+ * sigcontext frame, plug in the values to be tested, and then return,
+ * which implicitly invokes sigreturn(2) and programs the user context
+ * as desired.
+ *
+ * For tests for which we expect sigreturn and the subsequent return to
+ * user mode to succeed, we return to a short trampoline that generates
+ * SIGTRAP so that the meat of the tests can be ordinary C code in a
+ * SIGTRAP handler.
+ *
+ * The inner workings of each test is documented below.
+ *
+ * Do not run on outdated, unpatched kernels at risk of nasty crashes.
+ */
+
+#define _GNU_SOURCE
+
+#include <sys/time.h>
+#include <time.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <sys/mman.h>
+#include <sys/signal.h>
+#include <sys/ucontext.h>
+#include <asm/ldt.h>
+#include <err.h>
+#include <setjmp.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <sys/ptrace.h>
+#include <sys/user.h>
+
+/*
+ * In principle, this test can run on Linux emulation layers (e.g.
+ * Illumos "LX branded zones"). Solaris-based kernels reserve LDT
+ * entries 0-5 for their own internal purposes, so start our LDT
+ * allocations above that reservation. (The tests don't pass on LX
+ * branded zones, but at least this lets them run.)
+ */
+#define LDT_OFFSET 6
+
+/* An aligned stack accessible through some of our segments. */
+static unsigned char stack16[65536] __attribute__((aligned(4096)));
+
+/*
+ * An aligned int3 instruction used as a trampoline. Some of the tests
+ * want to fish out their ss values, so this trampoline copies ss to eax
+ * before the int3.
+ */
+asm (".pushsection .text\n\t"
+ ".type int3, @function\n\t"
+ ".align 4096\n\t"
+ "int3:\n\t"
+ "mov %ss,%eax\n\t"
+ "int3\n\t"
+ ".size int3, . - int3\n\t"
+ ".align 4096, 0xcc\n\t"
+ ".popsection");
+extern char int3[4096];
+
+/*
+ * At startup, we prepapre:
+ *
+ * - ldt_nonexistent_sel: An LDT entry that doesn't exist (all-zero
+ * descriptor or out of bounds).
+ * - code16_sel: A 16-bit LDT code segment pointing to int3.
+ * - data16_sel: A 16-bit LDT data segment pointing to stack16.
+ * - npcode32_sel: A 32-bit not-present LDT code segment pointing to int3.
+ * - npdata32_sel: A 32-bit not-present LDT data segment pointing to stack16.
+ * - gdt_data16_idx: A 16-bit GDT data segment pointing to stack16.
+ * - gdt_npdata32_idx: A 32-bit not-present GDT data segment pointing to
+ * stack16.
+ *
+ * For no particularly good reason, xyz_sel is a selector value with the
+ * RPL and LDT bits filled in, whereas xyz_idx is just an index into the
+ * descriptor table. These variables will be zero if their respective
+ * segments could not be allocated.
+ */
+static unsigned short ldt_nonexistent_sel;
+static unsigned short code16_sel, data16_sel, npcode32_sel, npdata32_sel;
+
+static unsigned short gdt_data16_idx, gdt_npdata32_idx;
+
+static unsigned short GDT3(int idx)
+{
+ return (idx << 3) | 3;
+}
+
+static unsigned short LDT3(int idx)
+{
+ return (idx << 3) | 7;
+}
+
+/* Our sigaltstack scratch space. */
+static char altstack_data[SIGSTKSZ];
+
+static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
+ int flags)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_sigaction = handler;
+ sa.sa_flags = SA_SIGINFO | flags;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+static void clearhandler(int sig)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_handler = SIG_DFL;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+static void add_ldt(const struct user_desc *desc, unsigned short *var,
+ const char *name)
+{
+ if (syscall(SYS_modify_ldt, 1, desc, sizeof(*desc)) == 0) {
+ *var = LDT3(desc->entry_number);
+ } else {
+ printf("[NOTE]\tFailed to create %s segment\n", name);
+ *var = 0;
+ }
+}
+
+static void setup_ldt(void)
+{
+ if ((unsigned long)stack16 > (1ULL << 32) - sizeof(stack16))
+ errx(1, "stack16 is too high\n");
+ if ((unsigned long)int3 > (1ULL << 32) - sizeof(int3))
+ errx(1, "int3 is too high\n");
+
+ ldt_nonexistent_sel = LDT3(LDT_OFFSET + 2);
+
+ const struct user_desc code16_desc = {
+ .entry_number = LDT_OFFSET + 0,
+ .base_addr = (unsigned long)int3,
+ .limit = 4095,
+ .seg_32bit = 0,
+ .contents = 2, /* Code, not conforming */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+ add_ldt(&code16_desc, &code16_sel, "code16");
+
+ const struct user_desc data16_desc = {
+ .entry_number = LDT_OFFSET + 1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 0,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+ add_ldt(&data16_desc, &data16_sel, "data16");
+
+ const struct user_desc npcode32_desc = {
+ .entry_number = LDT_OFFSET + 3,
+ .base_addr = (unsigned long)int3,
+ .limit = 4095,
+ .seg_32bit = 1,
+ .contents = 2, /* Code, not conforming */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+ add_ldt(&npcode32_desc, &npcode32_sel, "npcode32");
+
+ const struct user_desc npdata32_desc = {
+ .entry_number = LDT_OFFSET + 4,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 1,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+ add_ldt(&npdata32_desc, &npdata32_sel, "npdata32");
+
+ struct user_desc gdt_data16_desc = {
+ .entry_number = -1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 0,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+
+ if (syscall(SYS_set_thread_area, &gdt_data16_desc) == 0) {
+ /*
+ * This probably indicates vulnerability to CVE-2014-8133.
+ * Merely getting here isn't definitive, though, and we'll
+ * diagnose the problem for real later on.
+ */
+ printf("[WARN]\tset_thread_area allocated data16 at index %d\n",
+ gdt_data16_desc.entry_number);
+ gdt_data16_idx = gdt_data16_desc.entry_number;
+ } else {
+ printf("[OK]\tset_thread_area refused 16-bit data\n");
+ }
+
+ struct user_desc gdt_npdata32_desc = {
+ .entry_number = -1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 1,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+
+ if (syscall(SYS_set_thread_area, &gdt_npdata32_desc) == 0) {
+ /*
+ * As a hardening measure, newer kernels don't allow this.
+ */
+ printf("[WARN]\tset_thread_area allocated npdata32 at index %d\n",
+ gdt_npdata32_desc.entry_number);
+ gdt_npdata32_idx = gdt_npdata32_desc.entry_number;
+ } else {
+ printf("[OK]\tset_thread_area refused 16-bit data\n");
+ }
+}
+
+/* State used by our signal handlers. */
+static gregset_t initial_regs, requested_regs, resulting_regs;
+
+/* Instructions for the SIGUSR1 handler. */
+static volatile unsigned short sig_cs, sig_ss;
+static volatile sig_atomic_t sig_trapped, sig_err, sig_trapno;
+
+/* Abstractions for some 32-bit vs 64-bit differences. */
+#ifdef __x86_64__
+# define REG_IP REG_RIP
+# define REG_SP REG_RSP
+# define REG_AX REG_RAX
+
+struct selectors {
+ unsigned short cs, gs, fs, ss;
+};
+
+static unsigned short *ssptr(ucontext_t *ctx)
+{
+ struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS];
+ return &sels->ss;
+}
+
+static unsigned short *csptr(ucontext_t *ctx)
+{
+ struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS];
+ return &sels->cs;
+}
+#else
+# define REG_IP REG_EIP
+# define REG_SP REG_ESP
+# define REG_AX REG_EAX
+
+static greg_t *ssptr(ucontext_t *ctx)
+{
+ return &ctx->uc_mcontext.gregs[REG_SS];
+}
+
+static greg_t *csptr(ucontext_t *ctx)
+{
+ return &ctx->uc_mcontext.gregs[REG_CS];
+}
+#endif
+
+/* Number of errors in the current test case. */
+static volatile sig_atomic_t nerrs;
+
+/*
+ * SIGUSR1 handler. Sets CS and SS as requested and points IP to the
+ * int3 trampoline. Sets SP to a large known value so that we can see
+ * whether the value round-trips back to user mode correctly.
+ */
+static void sigusr1(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t*)ctx_void;
+
+ memcpy(&initial_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+
+ *csptr(ctx) = sig_cs;
+ *ssptr(ctx) = sig_ss;
+
+ ctx->uc_mcontext.gregs[REG_IP] =
+ sig_cs == code16_sel ? 0 : (unsigned long)&int3;
+ ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL;
+ ctx->uc_mcontext.gregs[REG_AX] = 0;
+
+ memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+ requested_regs[REG_AX] = *ssptr(ctx); /* The asm code does this. */
+
+ return;
+}
+
+/*
+ * Called after a successful sigreturn. Restores our state so that
+ * the original raise(SIGUSR1) returns.
+ */
+static void sigtrap(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t*)ctx_void;
+
+ sig_err = ctx->uc_mcontext.gregs[REG_ERR];
+ sig_trapno = ctx->uc_mcontext.gregs[REG_TRAPNO];
+
+ unsigned short ss;
+ asm ("mov %%ss,%0" : "=r" (ss));
+
+ greg_t asm_ss = ctx->uc_mcontext.gregs[REG_AX];
+ if (asm_ss != sig_ss && sig == SIGTRAP) {
+ /* Sanity check failure. */
+ printf("[FAIL]\tSIGTRAP: ss = %hx, frame ss = %hx, ax = %llx\n",
+ ss, *ssptr(ctx), (unsigned long long)asm_ss);
+ nerrs++;
+ }
+
+ memcpy(&resulting_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+ memcpy(&ctx->uc_mcontext.gregs, &initial_regs, sizeof(gregset_t));
+
+ sig_trapped = sig;
+}
+
+/*
+ * Checks a given selector for its code bitness or returns -1 if it's not
+ * a usable code segment selector.
+ */
+int cs_bitness(unsigned short cs)
+{
+ uint32_t valid = 0, ar;
+ asm ("lar %[cs], %[ar]\n\t"
+ "jnz 1f\n\t"
+ "mov $1, %[valid]\n\t"
+ "1:"
+ : [ar] "=r" (ar), [valid] "+rm" (valid)
+ : [cs] "r" (cs));
+
+ if (!valid)
+ return -1;
+
+ bool db = (ar & (1 << 22));
+ bool l = (ar & (1 << 21));
+
+ if (!(ar & (1<<11)))
+ return -1; /* Not code. */
+
+ if (l && !db)
+ return 64;
+ else if (!l && db)
+ return 32;
+ else if (!l && !db)
+ return 16;
+ else
+ return -1; /* Unknown bitness. */
+}
+
+/* Finds a usable code segment of the requested bitness. */
+int find_cs(int bitness)
+{
+ unsigned short my_cs;
+
+ asm ("mov %%cs,%0" : "=r" (my_cs));
+
+ if (cs_bitness(my_cs) == bitness)
+ return my_cs;
+ if (cs_bitness(my_cs + (2 << 3)) == bitness)
+ return my_cs + (2 << 3);
+ if (my_cs > (2<<3) && cs_bitness(my_cs - (2 << 3)) == bitness)
+ return my_cs - (2 << 3);
+ if (cs_bitness(code16_sel) == bitness)
+ return code16_sel;
+
+ printf("[WARN]\tCould not find %d-bit CS\n", bitness);
+ return -1;
+}
+
+static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss)
+{
+ int cs = find_cs(cs_bits);
+ if (cs == -1) {
+ printf("[SKIP]\tCode segment unavailable for %d-bit CS, %d-bit SS\n",
+ cs_bits, use_16bit_ss ? 16 : 32);
+ return 0;
+ }
+
+ if (force_ss != -1) {
+ sig_ss = force_ss;
+ } else {
+ if (use_16bit_ss) {
+ if (!data16_sel) {
+ printf("[SKIP]\tData segment unavailable for %d-bit CS, 16-bit SS\n",
+ cs_bits);
+ return 0;
+ }
+ sig_ss = data16_sel;
+ } else {
+ asm volatile ("mov %%ss,%0" : "=r" (sig_ss));
+ }
+ }
+
+ sig_cs = cs;
+
+ printf("[RUN]\tValid sigreturn: %d-bit CS (%hx), %d-bit SS (%hx%s)\n",
+ cs_bits, sig_cs, use_16bit_ss ? 16 : 32, sig_ss,
+ (sig_ss & 4) ? "" : ", GDT");
+
+ raise(SIGUSR1);
+
+ nerrs = 0;
+
+ /*
+ * Check that each register had an acceptable value when the
+ * int3 trampoline was invoked.
+ */
+ for (int i = 0; i < NGREG; i++) {
+ greg_t req = requested_regs[i], res = resulting_regs[i];
+ if (i == REG_TRAPNO || i == REG_IP)
+ continue; /* don't care */
+ if (i == REG_SP) {
+ printf("\tSP: %llx -> %llx\n", (unsigned long long)req,
+ (unsigned long long)res);
+
+ /*
+ * In many circumstances, the high 32 bits of rsp
+ * are zeroed. For example, we could be a real
+ * 32-bit program, or we could hit any of a number
+ * of poorly-documented IRET or segmented ESP
+ * oddities. If this happens, it's okay.
+ */
+ if (res == (req & 0xFFFFFFFF))
+ continue; /* OK; not expected to work */
+ }
+
+ bool ignore_reg = false;
+#if __i386__
+ if (i == REG_UESP)
+ ignore_reg = true;
+#else
+ if (i == REG_CSGSFS) {
+ struct selectors *req_sels =
+ (void *)&requested_regs[REG_CSGSFS];
+ struct selectors *res_sels =
+ (void *)&resulting_regs[REG_CSGSFS];
+ if (req_sels->cs != res_sels->cs) {
+ printf("[FAIL]\tCS mismatch: requested 0x%hx; got 0x%hx\n",
+ req_sels->cs, res_sels->cs);
+ nerrs++;
+ }
+
+ if (req_sels->ss != res_sels->ss) {
+ printf("[FAIL]\tSS mismatch: requested 0x%hx; got 0x%hx\n",
+ req_sels->ss, res_sels->ss);
+ nerrs++;
+ }
+
+ continue;
+ }
+#endif
+
+ /* Sanity check on the kernel */
+ if (i == REG_AX && requested_regs[i] != resulting_regs[i]) {
+ printf("[FAIL]\tAX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n",
+ (unsigned long long)requested_regs[i],
+ (unsigned long long)resulting_regs[i]);
+ nerrs++;
+ continue;
+ }
+
+ if (requested_regs[i] != resulting_regs[i] && !ignore_reg) {
+ /*
+ * SP is particularly interesting here. The
+ * usual cause of failures is that we hit the
+ * nasty IRET case of returning to a 16-bit SS,
+ * in which case bits 16:31 of the *kernel*
+ * stack pointer persist in ESP.
+ */
+ printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n",
+ i, (unsigned long long)requested_regs[i],
+ (unsigned long long)resulting_regs[i]);
+ nerrs++;
+ }
+ }
+
+ if (nerrs == 0)
+ printf("[OK]\tall registers okay\n");
+
+ return nerrs;
+}
+
+static int test_bad_iret(int cs_bits, unsigned short ss, int force_cs)
+{
+ int cs = force_cs == -1 ? find_cs(cs_bits) : force_cs;
+ if (cs == -1)
+ return 0;
+
+ sig_cs = cs;
+ sig_ss = ss;
+
+ printf("[RUN]\t%d-bit CS (%hx), bogus SS (%hx)\n",
+ cs_bits, sig_cs, sig_ss);
+
+ sig_trapped = 0;
+ raise(SIGUSR1);
+ if (sig_trapped) {
+ char errdesc[32] = "";
+ if (sig_err) {
+ const char *src = (sig_err & 1) ? " EXT" : "";
+ const char *table;
+ if ((sig_err & 0x6) == 0x0)
+ table = "GDT";
+ else if ((sig_err & 0x6) == 0x4)
+ table = "LDT";
+ else if ((sig_err & 0x6) == 0x2)
+ table = "IDT";
+ else
+ table = "???";
+
+ sprintf(errdesc, "%s%s index %d, ",
+ table, src, sig_err >> 3);
+ }
+
+ char trapname[32];
+ if (sig_trapno == 13)
+ strcpy(trapname, "GP");
+ else if (sig_trapno == 11)
+ strcpy(trapname, "NP");
+ else if (sig_trapno == 12)
+ strcpy(trapname, "SS");
+ else if (sig_trapno == 32)
+ strcpy(trapname, "IRET"); /* X86_TRAP_IRET */
+ else
+ sprintf(trapname, "%d", sig_trapno);
+
+ printf("[OK]\tGot #%s(0x%lx) (i.e. %s%s)\n",
+ trapname, (unsigned long)sig_err,
+ errdesc, strsignal(sig_trapped));
+ return 0;
+ } else {
+ printf("[FAIL]\tDid not get SIGSEGV\n");
+ return 1;
+ }
+}
+
+int main()
+{
+ int total_nerrs = 0;
+ unsigned short my_cs, my_ss;
+
+ asm volatile ("mov %%cs,%0" : "=r" (my_cs));
+ asm volatile ("mov %%ss,%0" : "=r" (my_ss));
+ setup_ldt();
+
+ stack_t stack = {
+ .ss_sp = altstack_data,
+ .ss_size = SIGSTKSZ,
+ };
+ if (sigaltstack(&stack, NULL) != 0)
+ err(1, "sigaltstack");
+
+ sethandler(SIGUSR1, sigusr1, 0);
+ sethandler(SIGTRAP, sigtrap, SA_ONSTACK);
+
+ /* Easy cases: return to a 32-bit SS in each possible CS bitness. */
+ total_nerrs += test_valid_sigreturn(64, false, -1);
+ total_nerrs += test_valid_sigreturn(32, false, -1);
+ total_nerrs += test_valid_sigreturn(16, false, -1);
+
+ /*
+ * Test easy espfix cases: return to a 16-bit LDT SS in each possible
+ * CS bitness. NB: with a long mode CS, the SS bitness is irrelevant.
+ *
+ * This catches the original missing-espfix-on-64-bit-kernels issue
+ * as well as CVE-2014-8134.
+ */
+ total_nerrs += test_valid_sigreturn(64, true, -1);
+ total_nerrs += test_valid_sigreturn(32, true, -1);
+ total_nerrs += test_valid_sigreturn(16, true, -1);
+
+ if (gdt_data16_idx) {
+ /*
+ * For performance reasons, Linux skips espfix if SS points
+ * to the GDT. If we were able to allocate a 16-bit SS in
+ * the GDT, see if it leaks parts of the kernel stack pointer.
+ *
+ * This tests for CVE-2014-8133.
+ */
+ total_nerrs += test_valid_sigreturn(64, true,
+ GDT3(gdt_data16_idx));
+ total_nerrs += test_valid_sigreturn(32, true,
+ GDT3(gdt_data16_idx));
+ total_nerrs += test_valid_sigreturn(16, true,
+ GDT3(gdt_data16_idx));
+ }
+
+ /*
+ * We're done testing valid sigreturn cases. Now we test states
+ * for which sigreturn itself will succeed but the subsequent
+ * entry to user mode will fail.
+ *
+ * Depending on the failure mode and the kernel bitness, these
+ * entry failures can generate SIGSEGV, SIGBUS, or SIGILL.
+ */
+ clearhandler(SIGTRAP);
+ sethandler(SIGSEGV, sigtrap, SA_ONSTACK);
+ sethandler(SIGBUS, sigtrap, SA_ONSTACK);
+ sethandler(SIGILL, sigtrap, SA_ONSTACK); /* 32-bit kernels do this */
+
+ /* Easy failures: invalid SS, resulting in #GP(0) */
+ test_bad_iret(64, ldt_nonexistent_sel, -1);
+ test_bad_iret(32, ldt_nonexistent_sel, -1);
+ test_bad_iret(16, ldt_nonexistent_sel, -1);
+
+ /* These fail because SS isn't a data segment, resulting in #GP(SS) */
+ test_bad_iret(64, my_cs, -1);
+ test_bad_iret(32, my_cs, -1);
+ test_bad_iret(16, my_cs, -1);
+
+ /* Try to return to a not-present code segment, triggering #NP(SS). */
+ test_bad_iret(32, my_ss, npcode32_sel);
+
+ /*
+ * Try to return to a not-present but otherwise valid data segment.
+ * This will cause IRET to fail with #SS on the espfix stack. This
+ * exercises CVE-2014-9322.
+ *
+ * Note that, if espfix is enabled, 64-bit Linux will lose track
+ * of the actual cause of failure and report #GP(0) instead.
+ * This would be very difficult for Linux to avoid, because
+ * espfix64 causes IRET failures to be promoted to #DF, so the
+ * original exception frame is never pushed onto the stack.
+ */
+ test_bad_iret(32, npdata32_sel, -1);
+
+ /*
+ * Try to return to a not-present but otherwise valid data
+ * segment without invoking espfix. Newer kernels don't allow
+ * this to happen in the first place. On older kernels, though,
+ * this can trigger CVE-2014-9322.
+ */
+ if (gdt_npdata32_idx)
+ test_bad_iret(32, GDT3(gdt_npdata32_idx), -1);
+
+ return total_nerrs ? 1 : 0;
+}
diff --git a/tools/testing/selftests/x86/trivial_32bit_program.c b/tools/testing/selftests/x86/trivial_32bit_program.c
new file mode 100644
index 000000000000..2e231beb0a39
--- /dev/null
+++ b/tools/testing/selftests/x86/trivial_32bit_program.c
@@ -0,0 +1,14 @@
+/*
+ * Trivial program to check that we have a valid 32-bit build environment.
+ * Copyright (c) 2015 Andy Lutomirski
+ * GPL v2
+ */
+
+#include <stdio.h>
+
+int main()
+{
+ printf("\n");
+
+ return 0;
+}