summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-09-25nvmet-fc: ensure target queue id within range.James Smart1-0/+3
When searching for queue id's ensure they are within the expected range. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: on port remove call put outside lockJames Smart1-1/+5
Avoid calling the put routine, as it may traverse to free routines while holding the target lock. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-rdma: don't fully stop the controller in error recoverySagi Grimberg1-1/+1
By calling nvme_stop_ctrl on a already failed controller will wait for the scan work to complete (only by identify timeout expiration which is 60 seconds). This is unnecessary when we already know that the controller has failed. Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-rdma: give up reconnect if state change failsSagi Grimberg1-1/+6
If we failed to transition to state LIVE after a successful reconnect, then controller deletion already started. In this case there is no point moving forward with reconnect. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-core: Use nvme_wq to queue async events and fw activationSagi Grimberg1-2/+2
async_event_work might race as it is executed from two different workqueues at the moment. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: fix sqhd reference when admin queue connect failsJames Smart1-1/+2
Fix bug in sqhd patch. It wasn't the sq that was at risk. In the case where the admin queue connect command fails, the sq->size field is not set. Therefore, this becomes a divide by zero error. Add a quick check to bypass under this failure condition. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25block: fix a crash caused by wrong APIShaohua Li1-1/+1
part_stat_show takes a part device not a disk, so we should use part_to_disk. Fixes: d62e26b3ffd2("block: pass in queue to inflight accounting") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25fs: Fix page cache inconsistency when mixing buffered and AIO DIOLukas Czerner3-21/+67
Currently when mixing buffered reads and asynchronous direct writes it is possible to end up with the situation where we have stale data in the page cache while the new data is already written to disk. This is permanent until the affected pages are flushed away. Despite the fact that mixing buffered and direct IO is ill-advised it does pose a thread for a data integrity, is unexpected and should be fixed. Fix this by deferring completion of asynchronous direct writes to a process context in the case that there are mapped pages to be found in the inode. Later before the completion in dio_complete() invalidate the pages in question. This ensures that after the completion the pages in the written area are either unmapped, or populated with up-to-date data. Also do the same for the iomap case which uses iomap_dio_complete() instead. This has a side effect of deferring the completion to a process context for every AIO DIO that happens on inode that has pages mapped. However since the consensus is that this is ill-advised practice the performance implication should not be a problem. This was based on proposal from Jeff Moyer, thanks! Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet: implement valid sqhd values in completionsJames Smart3-6/+12
To support sqhd, for initiators that are following the spec and paying attention to sqhd vs their sqtail values: - add sqhd to struct nvmet_sq - initialize sqhd to 0 in nvmet_sq_setup - rather than propagate the 0's-based qsize value from the connect message which requires a +1 in every sqhd update, and as nothing else references it, convert to 1's-based value in nvmt_sq/cq_setup() calls. - validate connect message sqsize being non-zero per spec. - updated assign sqhd for every completion that goes back. Also remove handling the NULL sq case in __nvmet_req_complete, as it can't happen with the current code. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fabrics: Allow 0 as KATO valueGuilherme G. Piccoli1-9/+9
Currently, driver code allows user to set 0 as KATO (Keep Alive TimeOut), but this is not being respected. This patch enforces the expected behavior. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: allow timed-out ios to retryJames Smart1-2/+0
Currently the nvme_req_needs_retry() applies several checks to see if a retry is allowed. On of those is whether the current time has exceeded the start time of the io plus the timeout length. This check, if an io times out, means there is never a retry allowed for the io. Which means applications see the io failure. Remove this check and allow the io to timeout, like it does on other protocols, and retries to be made. On the FC transport, a frame can be lost for an individual io, and there may be no other errors that escalate for the connection/association. The io will timeout, which causes the transport to escalate into creating a new association, but the io that timed out, due to this retry logic, has already failed back to the application and things are hosed. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: stop aer posting if controller state not liveJames Smart1-2/+3
If an nvme async_event command completes, in most cases, a new async event is posted. However, if the controller enters a resetting or reconnecting state, there is nothing to block the scheduled work element from posting the async event again. Nor are there calls from the transport to stop async events when an association dies. In the case of FC, where the association is torn down, the aer must be aborted on the FC link and completes through the normal job completion path. Thus the terminated async event ends up being rescheduled even though the controller isn't in a valid state for the aer, and the reposting gets the transport into a partially torn down data structure. It's possible to hit the scenario on rdma, although much less likely due to an aer completing right as the association is terminated and as the association teardown reclaims the blk requests via nvme_cancel_request() so its immediate, not a link-related action like on FC. Fix by putting controller state checks in both the async event completion routine where it schedules the async event and in the async event work routine before it calls into the transport. It's effectively a "stop_async_events()" behavior. The transport, when it creates a new association with the subsystem will transition the state back to live and is already restarting the async event posting. Signed-off-by: James Smart <james.smart@broadcom.com> [hch: remove taking a lock over reading the controller state] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-pci: Print invalid SGL only onceKeith Busch1-12/+18
The WARN_ONCE macro returns true if the condition is true, not if the warn was raised, so we're printing the scatter list every time it's invalid. This is excessive and makes debugging harder, so this patch prints it just once. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-pci: initialize queue memory before interruptsKeith Busch1-2/+2
A spurious interrupt before the nvme driver has initialized the completion queue may inadvertently cause the driver to believe it has a completion to process. This may result in a NULL dereference since the nvmeq's tags are not set at this point. The patch initializes the host's CQ memory so that a spurious interrupt isn't mistaken for a real completion. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: fix failing max io queue connectionsJames Smart1-3/+3
fc transport is treating NVMET_NR_QUEUES as maximum queue count, e.g. admin queue plus NVMET_NR_QUEUES-1 io queues. But NVMET_NR_QUEUES is the number of io queues, so maximum queue count is really NVMET_NR_QUEUES+1. Fix the handling in the target fc transport Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fc: use transport-specific sgl formatJames Smart1-6/+7
Sync with NVM Express spec change and FC-NVME 1.18. FC transport sets SGL type to Transport SGL Data Block Descriptor and subtype to transport-specific value 0x0A. Removed the warn-on's on the PRP fields. They are unneeded. They were to check for values from the upper layer that weren't set right, and for the most part were fine. But, with Async events, which reuse the same structure and 2nd time issued the SGL overlay converted them to the Transport SGL values - the warn-on's were errantly firing. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme: add transport SGL definitionsJames Smart1-0/+6
Add transport SGL defintions from NVMe TP 4008, required for the final NVMe-FC standard. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme.h: remove FC transport-specific error valuesJames Smart1-13/+0
The NVM express group recinded the reserved range for the transport. Remove the FC-centric values that had been defined. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25qla2xxx: remove use of FC-specific error codesJames Smart1-1/+1
The qla2xxx driver uses the FC-specific error when it needed to return an error to the FC-NVME transport. Convert to use a generic value instead. Signed-off-by: James Smart <james.smart@broadcom.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25lpfc: remove use of FC-specific error codesJames Smart1-1/+1
The lpfc driver uses the FC-specific error when it needed to return an error to the FC-NVME transport. Convert to use a generic value instead. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fcloop: remove use of FC-specific error codesJames Smart1-1/+1
The FC-NVME transport loopback test module used the FC-specific error codes in cases where it emulated a transport abort case. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvmet-fc: remove use of FC-specific error codesJames Smart1-6/+3
The FC-NVME target transport used the FC-specific error codes in return codes when the transport or lldd failed. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nvme-fc: remove use of FC-specific error codesJames Smart1-4/+4
The FC-NVME transport used the FC-specific error codes in cases where it had to fabricate an error to go back up stack. Instead of using the FC-specific values, now use a generic value (NVME_SC_INTERNAL). Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25loop: remove union of use_aio and ref in struct loop_cmdOmar Sandoval1-4/+2
When the request is completed, lo_complete_rq() checks cmd->use_aio. However, if this is in fact an aio request, cmd->use_aio will have already been reused as cmd->ref by lo_rw_aio*. Fix it by not using a union. On x86_64, there's a hole after the union anyways, so this doesn't make struct loop_cmd any bigger. Fixes: 92d773324b7e ("block/loop: fix use after free") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25blktrace: Fix potential deadlock between delete & sysfs opsWaiman Long3-6/+16
The lockdep code had reported the following unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#228); lock(&bdev->bd_mutex/1); lock(s_active#228); lock(&bdev->bd_mutex); *** DEADLOCK *** The deadlock may happen when one task (CPU1) is trying to delete a partition in a block device and another task (CPU0) is accessing tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that partition. The s_active isn't an actual lock. It is a reference count (kn->count) on the sysfs (kernfs) file. Removal of a sysfs file, however, require a wait until all the references are gone. The reference count is treated like a rwsem using lockdep instrumentation code. The fact that a thread is in the sysfs callback method or in the ioctl call means there is a reference to the opended sysfs or device file. That should prevent the underlying block structure from being removed. Instead of using bd_mutex in the block_device structure, a new blk_trace_mutex is now added to the request_queue structure to protect access to the blk_trace structure. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Fix typo in patch subject line, and prune a comment detailing how the code used to work. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25nbd: ignore non-nbd ioctl'sJosef Bacik1-0/+6
In testing we noticed that nbd would spew if you ran a fio job against the raw device itself. This is because fio calls a block device specific ioctl, however the block layer will first pass this back to the driver ioctl handler in case the driver wants to do something special. Since the device was setup using netlink this caused us to spew every time fio called this ioctl. Since we don't have special handling, just error out for any non-nbd specific ioctl's that come in. This fixes the spew. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25bsg-lib: don't free job in bsg_prepare_jobChristoph Hellwig1-1/+0
The job structure is allocated as part of the request, so we should not free it in the error path of bsg_prepare_job. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25brd: fix overflow in __brd_direct_accessMikulas Patocka1-1/+1
The code in __brd_direct_access multiplies the pgoff variable by page size and divides it by 512. It can cause overflow on 32-bit architectures. The overflow happens if we create ramdisk larger than 4G and use it as a sparse device. This patch replaces multiplication and division with multiplication by the number of sectors per page. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 1647b9b959c7 ("brd: add dax_operations support") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-20Merge tag 'scsi-fixes' of ↵Linus Torvalds4-34/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of five small fixes: one is a null deref fix which is pretty critical for the fc transport class and one fixes a potential security issue of sg leaking kernel information" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fixup infoleak when using SG_GET_REQUEST_TABLE scsi: sg: factor out sg_fill_request_table() scsi: sd: Remove unnecessary condition in sd_read_block_limits() scsi: acornscsi: fix build error scsi: scsi_transport_fc: fix NULL pointer dereference in fc_bsg_job_timeout
2017-09-20Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull si_code fix from Eric Biederman: "When sorting out the si_code ambiguity fcntl I accidentally overshot and included SIGPOLL as well. Ooops! This is my trivial fix for that. Vince Weaver caught this when it landed in your tree with his perf_event_tests many of which started failing because the si_code changed" Quoth Vince Weaver: "I've tested with this patch applied and can confirm all of my tests now pass again" Fixes: d08477aa975e ("fcntl: Don't use ambiguous SIG_POLL si_codes") * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fcntl: Don't set si_code to SI_SIGIO when sig == SIGPOLL
2017-09-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-22/+27
Pull KVM fixes from Radim Krčmář: - fix build without CONFIG_HAVE_KVM_IRQ_ROUTING - fix NULL access in x86 CR access - fix race with VMX posted interrups * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interrupt KVM: VMX: do not change SN bit in vmx_update_pi_irte() KVM: x86: Fix the NULL pointer parameter in check_cr_write() Revert "KVM: Don't accept obviously wrong gsi values via KVM_IRQFD"
2017-09-19Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-3/+10
Pull MD fixes from Shaohua Li: "Two small patches to fix long-lived raid5 stripe batch bugs, one from Dennis and the other from me" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list md/raid5: fix a race condition in stripe batch
2017-09-19Merge tag '4.14-smb3-multidialect-support-and-fixes-for-stable' of ↵Linus Torvalds10-112/+235
git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Convert default dialect to smb2.1 or later to allow connecting to Windows 7 for example, also includes some fixes for stable" * tag '4.14-smb3-multidialect-support-and-fixes-for-stable' of git://git.samba.org/sfrench/cifs-2.6: Update version of cifs module cifs: hide unused functions SMB3: Add support for multidialect negotiate (SMB2.1 and later) CIFS/SMB3: Update documentation to reflect SMB3 and various changes cifs: check rsp for NULL before dereferencing in SMB2_open
2017-09-19KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interruptHaozhong Zhang1-12/+21
WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc)) in kvm_vcpu_trigger_posted_interrupt() intends to detect the violation of invariant that VT-d PI notification event is not suppressed when vcpu is in the guest mode. Because the two checks for the target vcpu mode and the target suppress field cannot be performed atomically, the target vcpu mode may change in between. If that does happen, WARN_ON_ONCE() here may raise false alarms. As the previous patch fixed the real invariant breaker, remove this WARN_ON_ONCE() to avoid false alarms, and document the allowed cases instead. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 28b835d60fcc ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-09-19KVM: VMX: do not change SN bit in vmx_update_pi_irte()Haozhong Zhang1-5/+1
In kvm_vcpu_trigger_posted_interrupt() and pi_pre_block(), KVM assumes that PI notification events should not be suppressed when the target vCPU is not blocked. vmx_update_pi_irte() sets the SN field before changing an interrupt from posting to remapping, but it does not check the vCPU mode. Therefore, the change of SN field may break above the assumption. Besides, I don't see reasons to suppress notification events here, so remove the changes of SN field to avoid race condition. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 28b835d60fcc ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-09-19KVM: x86: Fix the NULL pointer parameter in check_cr_write()Yu Zhang1-3/+5
Routine check_cr_write() will trigger emulator_get_cpuid()-> kvm_cpuid() to get maxphyaddr, and NULL is passed as values for ebx/ecx/edx. This is problematic because kvm_cpuid() will dereference these pointers. Fixes: d1cd3ce90044 ("KVM: MMU: check guest CR3 reserved bits based on its physical address width.") Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-09-19Revert "KVM: Don't accept obviously wrong gsi values via KVM_IRQFD"Jan H. Schönherr1-2/+0
This reverts commit 36ae3c0a36b7456432fedce38ae2f7bd3e01a563. The commit broke compilation on !CONFIG_HAVE_KVM_IRQ_ROUTING. Also, there may be cases with CONFIG_HAVE_KVM_IRQ_ROUTING, where larger gsi values make sense. As the commit was meant as an early indicator to user space that something is wrong, reverting just restores the previous behavior where overly large values are ignored when encountered (without any direct feedback). Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-09-19fcntl: Don't set si_code to SI_SIGIO when sig == SIGPOLLEric W. Biederman1-1/+1
When fixing things to avoid ambiguous cases I had a thinko and included SIGPOLL/SIGIO in with all of the other signals that have signal specific si_codes. Which is completely wrong. Fix that. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-09-18Merge tag 'mmc-v4.14-2' of ↵Linus Torvalds3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix trivial typo in Kconfig - Fixup initialization of mmc block requests MMC host: - cavium: Fix use-after-free bug reported by KASAN" * tag 'mmc-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: cavium: Fix use-after-free in of_platform_device_destroy mmc: host: fix typo after MMC_DEBUG move mmc: block: Fix incorrectly initialized requests
2017-09-18Update version of cifs moduleSteve French1-1/+1
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-09-18cifs: hide unused functionsArnd Bergmann1-0/+2
The newly added SMB2+ attribute support causes unused function warnings when CONFIG_CIFS_XATTR is disabled: fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function] smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function] smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon, This adds another #ifdef around the affected functions. Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+") Fixes: 95907fea4fd8 ("cifs: Add support for reading attributes on SMB2+") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steve French <smfrench@gmail.com>
2017-09-18SMB3: Add support for multidialect negotiate (SMB2.1 and later)Steve French5-18/+139
With the need to discourage use of less secure dialect, SMB1 (CIFS), we temporarily upgraded the dialect to SMB3 in 4.13, but since there are various servers which only support SMB2.1 (2.1 is more secure than CIFS/SMB1) but not optimal for a default dialect - add support for multidialect negotiation. cifs.ko will now request SMB2.1 or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will pick the latest most secure one it can support. In addition since we are sending multidialect negotiate, add support for secure negotiate to validate that a man in the middle didn't downgrade us. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> # 4.13+
2017-09-17CIFS/SMB3: Update documentation to reflect SMB3 and various changesSteve French4-91/+91
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-09-17Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-13/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Thomas Gleixner: - A fix for a user space regression in /proc/$PID/stat - A couple of objtool fixes: ~ Plug a memory leak ~ Avoid accessing empty sections which upsets certain binutil versions ~ Prevent corrupting the obj file when section sizes did not change * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc: Report eip/esp in /prod/PID/stat for coredumping objtool: Fix object file corruption objtool: Do not retrieve data from empty sections objtool: Fix memory leak in elf_create_rela_section()
2017-09-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix for an off by one error in a cpumask result comparison" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix cpumask check in __irq_startup_managed()
2017-09-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix addressing the missing CP8 feature bit in CPUID for a range of AMD ZEN models/mask revisions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/AMD: Fix erratum 1076 (CPB bit)
2017-09-17Linux 4.14-rc1Linus Torvalds1-2/+2
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds14-27/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-234/+467
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 20:37:08 +0300