| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently pstore record buffers are allocated using kmalloc() which has
a maximum size based on page size. If a large "pmsg-size" module
parameter is specified, pmsg will fail to copy the contents since
memdup_user() is limited to kmalloc() allocation sizes.
Since we don't need physically contiguous memory for any of the pstore
record buffers, use kvzalloc() to avoid such limitations in the core of
pstore and in the ram backend, and explicitly read from userspace using
vmemdup_user(). This also means that any other backends that want to
(or do already) support larger record sizes will Just Work now.
Signed-off-by: Yuxiao Zhang <yuxiaozhang@google.com>
Link: https://lore.kernel.org/r/20230627202540.881909-2-yuxiaozhang@google.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:
sysdump_panic_event+0x3b4/0x5b8
atomic_notifier_call_chain+0x54/0x90
panic+0x1c8/0x42c
die+0x29c/0x2a8
die_kernel_fault+0x68/0x78
__do_kernel_fault+0x1c4/0x1e0
do_bad_area+0x40/0x100
do_translation_fault+0x68/0x80
do_mem_abort+0x68/0xf8
el1_da+0x1c/0xc0
__raw_writeb+0x38/0x174
__memcpy_toio+0x40/0xac
persistent_ram_update+0x44/0x12c
persistent_ram_write+0x1a8/0x1b8
ramoops_pstore_write+0x198/0x1e8
pstore_console_write+0x94/0xe0
...
To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.
Fixes: 30696378f68a ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com
[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pstore supports compression using a variety of algorithms exposed by the
crypto API. This uses the deprecated comp (as opposed to scomp/acomp)
API, and so we should stop using that, and either move to the new API,
or switch to a different approach entirely.
Given that we only compress ASCII text in pstore, and considering that
this happens when the system is likely to be in an unstable state, the
flexibility that the complex crypto API provides does not outweigh its
impact on the risk that we might encounter additional problems when
trying to commit the kernel log contents to the pstore backend.
So let's switch [back] to the zlib deflate library API, and remove all
the complexity that really has no place in a low-level diagnostic
facility. Note that, while more modern compression algorithms have been
added to the kernel in recent years, the code size of zlib deflate is
substantially smaller than, e.g., zstd, while its performance in terms
of compression ratio is comparable for ASCII text, and speed is deemed
irrelevant in this context.
Note that this means that compressed pstore records may no longer be
accessible after a kernel upgrade, but this has never been part of the
contract. (The choice of compression algorithm is not stored in the
pstore records either)
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-3-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The worst case compression size used by pstore gives an upper bound for
how much the data might inadvertently *grow* due to encapsulation
overhead if the input is not compressible at all.
Given that pstore records have individual 'compressed' flags, we can
simply store the uncompressed data if compressing it would end up using
more space, making the worst case identical to the uncompressed case.
This means we can just drop all the elaborate logic that reasons about
upper bounds for each individual compression algorithm, and just store
the uncompressed data directly if compression fails for any reason.
Co-developed-by: Kees Cook <keescook@chromium.org>
Tested-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com> # Steam Deck
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230712162332.2670437-2-ardb@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
|
Pull xtensa fixes from Max Filippov:
- fix interaction between unaligned exception handler and load/store
exception handler
- fix parsing ISS network interface specification string
- add comment about etherdev freeing to ISS network driver
* tag 'xtensa-20230716' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix unaligned and load/store configuration interaction
xtensa: ISS: fix call to split_if_spec
xtensa: ISS: add comment about etherdev freeing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a lockdep warning when the event given is the first one, no event
group exists yet but the code still goes and iterates over event
siblings
* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove a cgroup from under a polling process properly
- Fix the idle sibling selection
* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: use kernfs polling functions for PSI trigger polling
sched/fair: Use recent_used_cpu to test p->cpus_ptr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"I'm mostly on vacation but what would vacation be without a few
critical fixes so people can use their gaming laptops when hiding away
from the sun (or rain)?
- Fix a really annoying interrupt storm in the AMD driver affecting
Asus TUF gaming notebooks
- Fix device tree parsing in the Renesas driver"
* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Unify debounce handling into amd_pinconf_set()
pinctrl: amd: Drop pull up select configuration
pinctrl: amd: Use amd_pinconf_set() for all config options
pinctrl: amd: Only use special debounce behavior for GPIO 0
pinctrl: renesas: rzg2l: Handle non-unique subnode names
pinctrl: renesas: rzv2m: Handle non-unique subnode names
|
|
Pull smb client fixes from Steve French:
- Two reconnect fixes: important fix to address inFlight count to leak
(which can leak credits), and fix for better handling a deleted share
- DFS fix
- SMB1 cleanup fix
- deferred close fix
* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix mid leak during reconnection after timeout threshold
cifs: is_network_name_deleted should return a bool
smb: client: fix missed ses refcounting
smb: client: Fix -Wstringop-overflow issues
cifs: if deferred close is disabled then close files immediately
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix Speculation_Store_Bypass reporting in /proc/self/status on
Power10
- Fix HPT with 4K pages since recent changes by implementing pmd_same()
- Fix 64-bit native_hpte_remove() to be irq-safe
Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.
* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
powerpc/64e: Fix obtool warnings in exceptions-64e.S
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
powerpc/64s: Fix native_hpte_remove() to be irq-safe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Remove LTO-only suffixes from promoted global function symbols
(Yonghong Song)
- Remove unused .text..refcount section from vmlinux.lds.h (Petr Pavlu)
- Add missing __always_inline to sparc __arch_xchg() (Arnd Bergmann)
- Claim maintainership of string routines
* tag 'hardening-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
sparc: mark __arch_xchg() as __always_inline
MAINTAINERS: Foolishly claim maintainership of string routines
kallsyms: strip LTO-only suffixes from promoted global functions
vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-arguments:
- Fix double counting of the string length for user-string and
symstr. This will require longer buffer in the array case.
- Fix not to count error code (minus value) for the total used
length in array argument. This makes the total used length
shorter.
- Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
- Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
- Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
Revert "tracing: Add "(fault)" name injection to kernel probes"
tracing/probes: Fix to update dynamic data counter if fetcharg uses it
tracing/probes: Fix not to count error code to total length
tracing/probes: Fix to avoid double count of the string length on the array
fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fairly minor driver specific fixes here, plus a bunch of
maintainership and admin updates. Nothing too remarkable"
* tag 'spi-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
mailmap: add entry for Jonas Gorski
MAINTAINERS: add myself for spi-bcm63xx
spi: s3c64xx: clear loopback bit after loopback test
spi: bcm63xx: fix max prepend length
MAINTAINERS: Add myself as a maintainer for Microchip SPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One fix for an out of bounds access in the interupt code here"
* tag 'regmap-fix-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix out-of-bounds access when allocating config buffers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a regression causing a crash on sysfs access of iommu-group
specific files
- Fix signedness bug in SVA code
* tag 'iommu-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid()
iommu: Fix crash during syfs iommu_groups/N/type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CFI fixes from Peter Zijlstra:
"Fix kCFI/FineIBT weaknesses
The primary bug Alyssa noticed was that with FineIBT enabled function
prologues have a spurious ENDBR instruction:
__cfi_foo:
endbr64
subl $hash, %r10d
jz 1f
ud2
nop
1:
foo:
endbr64 <--- *sadface*
This means that any indirect call that fails to target the __cfi
symbol and instead targets (the regular old) foo+0, will succeed due
to that second ENDBR.
Fixing this led to the discovery of a single indirect call that was
still doing this: ret_from_fork(). Since that's an assembly stub the
compiler would not generate the proper kCFI indirect call magic and it
would not get patched.
Brian came up with the most comprehensive fix -- convert the thing to
C with only a very thin asm wrapper. This ensures the kernel thread
boostrap is a proper kCFI call.
While discussing all this, Kees noted that kCFI hashes could/should be
poisoned to seal all functions whose address is never taken, further
limiting the valid kCFI targets -- much like we already do for IBT.
So what was a 'simple' observation and fix cascaded into a bunch of
inter-related CFI infrastructure fixes"
* tag 'x86_urgent_for_6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
x86/fineibt: Poison ENDBR at +0
x86: Rewrite ret_from_fork() in C
x86/32: Remove schedule_tail_wrapper()
x86/cfi: Extend ENDBR sealing to kCFI
x86/alternative: Rename apply_ibt_endbr()
x86/cfi: Extend {JMP,CAKK}_NOSPEC comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a bunch of small driver fixes and a larger rework of zone disk
handling (which reaches into blk and nvme).
The aacraid array-bounds fix is now critical since the security people
turned on -Werror for some build tests, which now fail without it"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Handle SRB status value 0x30
scsi: block: Improve checks in blk_revalidate_disk_zones()
scsi: block: virtio_blk: Set zone limits before revalidating zones
scsi: block: nullblk: Set zone limits before revalidating zones
scsi: nvme: zns: Set zone limits before revalidating zones
scsi: sd_zbc: Set zone limits before revalidating zones
scsi: ufs: core: Add support for qTimestamp attribute
scsi: aacraid: Avoid -Warray-bounds warning
scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
scsi: ufs: core: Update contact email for monitor sysfs nodes
scsi: scsi_debug: Remove dead code
scsi: qla2xxx: Use vmalloc_array() and vcalloc()
scsi: fnic: Use vmalloc_array() and vcalloc()
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
scsi: qla2xxx: Silence a static checker warning
scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)
- Fix for a flush handling regression in this release (Christoph)
- Fix for batched request time stamping (Chengming)
- Fix for a regression in the mq-deadline position calculation (Bart)
- Lockdep fix for blk-crypto (Eric)
- Fix for a regression in the Amiga partition handling changes
(Michael)
* tag 'block-6.5-2023-07-14' of git://git.kernel.dk/linux:
block: queue data commands from the flush state machine at the head
blk-mq: fix start_time_ns and alloc_time_ns for pre-allocated rq
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
block/mq-deadline: Fix a bug in deadline_from_pos()
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
block: remove dead struc request->completion_data field
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
blk-crypto: use dynamic lock class for blk_crypto_profile::lock
block/partition: fix signedness issue for Amiga partitions
|
|
Pull io_uring fix from Jens Axboe:
"Just a single tweak for the wait logic in io_uring"
* tag 'io_uring-6.5-2023-07-14' of git://git.kernel.dk/linux:
io_uring: Use io_schedule* in cqring wait
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix a formatting error in the hwprobe documentation
- fix a spurious warning in the RISC-V PMU driver
- fix memory detection on rv32 (problem does not manifest on any known
system)
- avoid parsing legacy parsing of I in ACPI ISA strings
* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't include Zicsr or Zifencei in I from ACPI
riscv: mm: fix truncation warning on RV32
perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
Documentation: RISC-V: hwprobe: Fix a formatting error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
sparc cpufreq driver.
Specifics:
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
- Remove __init from cpufreq callbacks in the sparc driver, because
they may be called after initialization too (Viresh Kumar)"
* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sparc: Don't mark cpufreq callbacks with __init
PM: QoS: Restore support for default value on frequency QoS
PM: hibernate: Fix writing maj:min to /sys/power/resume
|
|
Merge a PM QoS fix and a hibernation fix for 6.5-rc2.
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
* pm-sleep:
PM: hibernate: Fix writing maj:min to /sys/power/resume
* pm-qos:
PM: QoS: Restore support for default value on frequency QoS
|
|
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4a5 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.
Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull drm fixes from Dave Airlie:
"There were a bunch of fixes lined up for 2 weeks, so we have quite a
few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
nouveau makes an appearance.
So a bit busier than usual for rc2, but nothing seems out of the
ordinary.
fbdev:
- dma: Fix documented default preferred_bpp value
ttm:
- fix warning that we shouldn't mix && and ||
- never consider pinned BOs for eviction&swap
- Don't leak a resource on eviction error
- Don't leak a resource on swapout move error
- fix bulk_move corruption when adding a entry
client:
- Send hotplug event after registering a client
dma-buf:
- keep the signaling time of merged fences v3
- fix an error pointer vs NULL bug
sched:
- wait for all deps in kill jobs
- call set fence parent from scheduled
i915:
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner
- Consider OA buffer boundary when zeroing out reports
- Remove dead code from gen8_pte_encode
- Fix one wrong caching mode enum usage
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms
don't support it)
nouveau:
- disp: fix HDMI on gt215+
- disp/g94: enable HDMI
- acr: Abort loading ACR if no firmware was found
- bring back blit subchannel for pre nv50 GPUs
- Fix drm_dp_remove_payload() invocation
ivpu:
- Fix VPU register access in irq disable
- Clear specific interrupt status bits on C0
bridge:
- dw_hdmi: fix connector access for scdc
- ti-sn65dsi86: Fix auxiliary bus lifetime
panel:
- simple: Add connector_type for innolux_at043tn24
- simple: Add Powertip PH800480T013 drm_display_mode flags"
* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/nouveau: bring back blit subchannel for pre nv50 GPUs
drm/nouveau/acr: Abort loading ACR if no firmware was found
drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
drm/amd: Move helper for dynamic speed switch check out of smu13
drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
drm/amd/pm: share the code around SMU13 pcie parameters update
drm/amdgpu: avoid restore process run into dead loop.
drm/amd/pm: fix smu i2c data read risk
drm/nouveau/disp/g94: enable HDMI
drm/nouveau/disp: fix HDMI on gt215+
drm/client: Send hotplug event after registering a client
drm/i915: Fix one wrong caching mode enum usage
drm/i915: Remove dead code from gen8_pte_encode
drm/i915/perf: Consider OA buffer boundary when zeroing out reports
drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
drm/ttm: never consider pinned BOs for eviction&swap
drm/fbdev-dma: Fix documented default preferred_bpp value
dma-buf: fix an error pointer vs NULL bug
accel/ivpu: Clear specific interrupt status bits on C0
accel/ivpu: Fix VPU register access in irq disable
...
|
|
Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"
* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks
|
|
We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadfc6b ("blk-mq: do not do head insertions
post-pre-flush commands"). Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs. I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.
Fixes: 1e82fadfc6b ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive). It
never returns more then INT_MAX even if "max" is higher. It never
returns values in the 0 to (min - 1) range.
The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.
Fixes: 1a14bf0fc7ed ("iommu/sva: Use GFP_KERNEL for pasid allocation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountain
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The err_restore_domain flow was accidently inserted into the success path
in commit 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on
ARM"). It should only happen if iommu_create_device_direct_mappings()
fails. This caused the domains the be wrongly changed and freed whenever
the sysfs is used, resulting in an oops:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 3417 Comm: avocado Not tainted 6.4.0-rc4-next-20230602 #3
Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
RIP: 0010:__iommu_attach_device+0xc/0xa0
Code: c0 c3 cc cc cc cc 48 89 f0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 48 8b 47 08 <48> 8b 00 48 85 c0 74 74 48 89 f5 e8 64 12 49 00 41 89 c4 85 c0 74
RSP: 0018:ffffabae0220bd48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9ac04f70e410 RCX: 0000000000000001
RDX: ffff9ac044db20c0 RSI: ffff9ac044fa50d0 RDI: ffff9ac04f70e410
RBP: ffff9ac044fa50d0 R08: 1000000100209001 R09: 00000000000002dc
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ac043d54700
R13: ffff9ac043d54700 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f02e30ae000(0000) GS:ffff9afeb2440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000012afca006 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? __iommu_queue_command_sync+0x80/0xc0
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? __iommu_attach_device+0xc/0xa0
? __iommu_attach_device+0x1c/0xa0
__iommu_device_set_domain+0x42/0x80
__iommu_group_set_domain_internal+0x5d/0x160
iommu_setup_default_domain+0x318/0x400
iommu_group_store_type+0xb1/0x200
kernfs_fop_write_iter+0x12f/0x1c0
vfs_write+0x2a2/0x3b0
ksys_write+0x63/0xe0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f02e2f14a6f
Reorganize the error flow so that the success branch and error branches
are clearer.
Fixes: 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on ARM")
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-5bd8cc969d9e+1f1-iommu_set_def_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
fails
Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)
Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/
Fixes: 40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-12:
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A couple of nouveau patches addressing improving HDMI support and
firmware handling, a fix for TTM to skip pinned BO when evicting, and a
fix for the fbdev documentation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/nq3ke75juephbex5acfyi5t6bxv22nhmfcpfhru55haj2nv3us@gehrlmjbqgjk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Three patches address regressions related to post-EOF unexpected
behaviors and fsdax unavailability of chunk-based regular files.
The other two patches mainly get rid of kmap_atomic() and simplify
z_erofs_transform_plain().
- Fix two unexpected loop cases when reading beyond EOF
- Fix fsdax unavailability for chunk-based regular files
- Get rid of the remaining kmap_atomic()
- Minor cleanups"
* tag 'erofs-for-6.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix fsdax unavailability for chunk-based regular files
erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF
erofs: simplify z_erofs_transform_plain()
erofs: get rid of the remaining kmap_atomic()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.
Current release - regressions:
- netfilter: conntrack: gre: don't set assured flag for clash entries
- wifi: iwlwifi: remove 'use_tfh' config to fix crash
Previous releases - regressions:
- ipv6: fix a potential refcount underflow for idev
- icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
icmp6_dev()
- bpf: fix max stack depth check for async callbacks
- eth: mlx5e:
- check for NOT_READY flag state after locking
- fix page_pool page fragment tracking for XDP
- eth: igc:
- fix tx hang issue when QBV gate is closed
- fix corner cases for TSN offload
- eth: octeontx2-af: Move validation of ptp pointer before its usage
- eth: ena: fix shift-out-of-bounds in exponential backoff
Previous releases - always broken:
- core: prevent skb corruption on frag list segmentation
- sched:
- cls_fw: fix improper refcount update leads to use-after-free
- sch_qfq: account for stab overhead in qfq_enqueue
- netfilter:
- report use refcount overflow
- prevent OOB access in nft_byteorder_eval
- wifi: mt7921e: fix init command fail with enabled device
- eth: ocelot: fix oversize frame dropping for preemptible TCs
- eth: fec: recycle pages for transmitted XDP frames"
* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
selftests: tc-testing: add test for qfq with stab overhead
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
selftests: tc-testing: add tests for qfq mtu sanity check
net/sched: sch_qfq: reintroduce lmax bound check for MTU
wifi: cfg80211: fix receiving mesh packets without RFC1042 header
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
net: txgbe: fix eeprom calculation error
net/sched: make psched_mtu() RTNL-less safe
net: ena: fix shift-out-of-bounds in exponential backoff
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: flower: Ensure both minimum and maximum ports are specified
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
docs: netdev: update the URL of the status page
wifi: iwlwifi: remove 'use_tfh' config to fix crash
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
wifi: airo: avoid uninitialized warning in airo_get_rate()
octeontx2-pf: Add additional check for MCAM rules
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
net: fec: use netdev_err_once() instead of netdev_err()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote that
the size of the field will be passed in. But the parsing failed to
handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code was
not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
- Remove unused ftrace_regs_caller_ret() prototype.
- Quiet false positive of FORTIFY_SOURCE
Due to backward compatibility, the structure used to save stack
traces in the kernel had a fixed size of 8. This structure is
exported to user space via the tracing format file. A change was made
to allow more than 8 functions to be recorded, and user space now
uses the size field to know how many functions are actually in the
stack.
But the structure still has size of 8 (even though it points into the
ring buffer that has the required amount allocated to hold a full
stack.
This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it.
Hide this by using a pointer to the stack location on the ring buffer
instead of using the address of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to read
the data, but the read code uses rb_num_of_entries() that returned
zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store ftrace
functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed to be
off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak of iter->temp when reading trace_pipe
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
ring-buffer: Fix deadloop issue on reading trace_pipe
tracing: arm64: Avoid missing-prototype warnings
selftests/user_events: Test struct size match cases
tracing/user_events: Fix struct arg size match check
x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
arm64: ftrace: Add direct call trampoline samples support
samples: ftrace: Save required argument registers in sample trampolines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of the Xen related ELF-notes
- a fix for virtio handling in Xen dom0 when running Xen in a VM
* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.
In particular, the change a8ac2961148e ("sh: Avoid using IRQ0 on SH3
and SH4") causes several boards to hang during boot due to incorrect
IRQ numbers.
Geert Uytterhoeven has contributed patches that handle the virq offset
in the IRQ code for the dreamcast, highlander and r2d boards while
Artur Rojek has contributed a patch which handles the virq offset for
the hd64461 companion chip"
* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
sh: mach-highlander: Handle virq offset in cascaded IRL demux
sh: mach-r2d: Handle virq offset in cascaded IRL demux
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.5
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)"
* tag 'nvme-6.5-2023-07-13' of git://git.infradead.org/nvme:
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
|
|
The iocost rely on rq start_time_ns and alloc_time_ns to tell saturation
state of the block device. Most of the time request is allocated after
rq_qos_throttle() and its alloc_time_ns or start_time_ns won't be affected.
But for plug batched allocation introduced by the commit 47c122e35d7e
("block: pre-allocate requests if plug is started and is a batch"), we can
rq_qos_throttle() after the allocation of the request. This is what the
blk_mq_get_cached_request() does.
In this case, the cached request alloc_time_ns or start_time_ns is much
ahead if blocked in any qos ->throttle().
Fix it by setting alloc_time_ns and start_time_ns to now when the allocated
request is actually used.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230710105516.2053478-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
An otherwise correct change to the atomic operations uncovered an
existing bug in the sparc __arch_xchg() function, which is calls
__xchg_called_with_bad_pointer() when its arguments are unknown at
compile time:
ERROR: modpost: "__xchg_called_with_bad_pointer" [lib/atomic64_test.ko] undefined!
This now happens because gcc determines that it's better to not inline the
function. Avoid this by just marking the function as __always_inline
to force the compiler to do the right thing here.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/c525adc9-6623-4660-8718-e0c9311563b8@roeck-us.net/
Fixes: d12157efc8e08 ("locking/atomic: make atomic*_{cmp,}xchg optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628094938.2318171-1-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since the string API is tightly coupled with FORTIFY_SOURCE, I am
offering myself up as maintainer for it. Thankfully Andy is already a
reviewer and can keep me on the straight and narrow.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230712194625.never.252-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This reverts commit 2e9906f84fc7c99388bb7123ade167250d50f1c0.
It was turned out that commit 2e9906f84fc7 ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.
This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.
Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix to update dynamic data counter ('dyndata') and max length ('maxlen')
only if the fetcharg uses the dynamic data. Also get out arg->dynamic
from unlikely(). This makes dynamic data address wrong if
process_fetch_insn() returns error on !arg->dynamic case.
Link: https://lore.kernel.org/all/168908494781.123124.8160245359962103684.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20230710233400.5aaf024e@gandalf.local.home/
Fixes: 9178412ddf5a ("tracing: probeevent: Return consumed bytes of dynamic area")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix not to count the error code (which is minus value) to the total
used length of array, because it can mess up the return code of
process_fetch_insn_bottom(). Also clear the 'ret' value because it
will be used for calculating next data_loc entry.
Link: https://lore.kernel.org/all/168908493827.123124.2175257289106364229.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 9b960a38835f ("tracing: probeevent: Unify fetch_insn processing common part")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If an array is specified with the ustring or symstr, the length of the
strings are accumlated on both of 'ret' and 'total', which means the
length is double counted.
Just set the length to the 'ret' value for avoiding double counting.
Link: https://lore.kernel.org/all/168908492917.123124.15076463491122036025.stgit@devnote2/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/8819b154-2ba1-43c3-98a2-cbde20892023@moroto.mountain/
Fixes: 88903c464321 ("tracing/probe: Add ustring type for user-space string")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a comment the reason why fprobe_kprobe_handler() exits if any other
kprobe is running.
Link: https://lore.kernel.org/all/168874788299.159442.2485957441413653858.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20230706120916.3c6abf15@gandalf.local.home/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.
Fix this DMA direction, and reported in Guangwu's test.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
