| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
memcg_accumulate_slabinfo() is never called with a non-root kmem_cache as
a first argument, so the is_root_cache(s) check is redundant and can be
removed without any functional change.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-17-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently there are two lists of kmem_caches:
1) slab_caches, which contains all kmem_caches,
2) slab_root_caches, which contains only root kmem_caches.
And there is some preprocessor magic to have a single list if
CONFIG_MEMCG_KMEM isn't enabled.
It was required earlier because the number of non-root kmem_caches was
proportional to the number of memory cgroups and could reach really big
values. Now, when it cannot exceed the number of root kmem_caches, there
is really no reason to maintain two lists.
We never iterate over the slab_root_caches list on any hot paths, so it's
perfectly fine to iterate over slab_caches and filter out non-root
kmem_caches.
It allows to remove a lot of config-dependent code and two pointers from
the kmem_cache structure.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-16-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The memcg_kmem_get_cache() function became really trivial, so let's just
inline it into the single call point: memcg_slab_pre_alloc_hook().
It will make the code less bulky and can also help the compiler to
generate a better code.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-15-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because the number of non-root kmem_caches doesn't depend on the number of
memory cgroups anymore and is generally not very big, there is no more
need for a dedicated workqueue.
Also, as there is no more need to pass any arguments to the
memcg_create_kmem_cache() except the root kmem_cache, it's possible to
just embed the work structure into the kmem_cache and avoid the dynamic
allocation of the work structure.
This will also simplify the synchronization: for each root kmem_cache
there is only one work. So there will be no more concurrent attempts to
create a non-root kmem_cache for a root kmem_cache: the second and all
following attempts to queue the work will fail.
On the kmem_cache destruction path there is no more need to call the
expensive flush_workqueue() and wait for all pending works to be finished.
Instead, cancel_work_sync() can be used to cancel/wait for only one work.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-14-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is fairly big but mostly red patch, which makes all accounted slab
allocations use a single set of kmem_caches instead of creating a separate
set for each memory cgroup.
Because the number of non-root kmem_caches is now capped by the number of
root kmem_caches, there is no need to shrink or destroy them prematurely.
They can be perfectly destroyed together with their root counterparts.
This allows to dramatically simplify the management of non-root
kmem_caches and delete a ton of code.
This patch performs the following changes:
1) introduces memcg_params.memcg_cache pointer to represent the
kmem_cache which will be used for all non-root allocations
2) reuses the existing memcg kmem_cache creation mechanism
to create memcg kmem_cache on the first allocation attempt
3) memcg kmem_caches are named <kmemcache_name>-memcg,
e.g. dentry-memcg
4) simplifies memcg_kmem_get_cache() to just return memcg kmem_cache
or schedule it's creation and return the root cache
5) removes almost all non-root kmem_cache management code
(separate refcounter, reparenting, shrinking, etc)
6) makes slab debugfs to display root_mem_cgroup css id and never
show :dead and :deact flags in the memcg_slabinfo attribute.
Following patches in the series will simplify the kmem_cache creation.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-13-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To make the memcg_kmem_bypass() function available outside of the
memcontrol.c, let's move it to memcontrol.h. The function is small and
nicely fits into static inline sort of functions.
It will be used from the slab code.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-12-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Deprecate memory.kmem.slabinfo.
An empty file will be presented if corresponding config options are
enabled.
The interface is implementation dependent, isn't present in cgroup v2, and
is generally useful only for core mm debugging purposes. In other words,
it doesn't provide any value for the absolute majority of users.
A drgn-based replacement can be found in
tools/cgroup/memcg_slabinfo.py. It does support cgroup v1 and v2,
mimics memory.kmem.slabinfo output and also allows to get any
additional information without a need to recompile the kernel.
If a drgn-based solution is too slow for a task, a bpf-based tracing tool
can be used, which can easily keep track of all slab allocations belonging
to a memory cgroup.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-11-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch to per-object accounting of non-root slab objects.
Charging is performed using obj_cgroup API in the pre_alloc hook.
Obj_cgroup is charged with the size of the object and the size of
metadata: as now it's the size of an obj_cgroup pointer. If the amount of
memory has been charged successfully, the actual allocation code is
executed. Otherwise, -ENOMEM is returned.
In the post_alloc hook if the actual allocation succeeded, corresponding
vmstats are bumped and the obj_cgroup pointer is saved. Otherwise, the
charge is canceled.
On the free path obj_cgroup pointer is obtained and used to uncharge the
size of the releasing object.
Memcg and lruvec counters are now representing only memory used by active
slab objects and do not include the free space. The free space is shared
and doesn't belong to any specific cgroup.
Global per-node slab vmstats are still modified from
(un)charge_slab_page() functions. The idea is to keep all slab pages
accounted as slab pages on system level.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-10-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Store the obj_cgroup pointer in the corresponding place of
page->obj_cgroups for each allocated non-root slab object. Make sure that
each allocated object holds a reference to obj_cgroup.
Objcg pointer is obtained from the memcg->objcg dereferencing in
memcg_kmem_get_cache() and passed from pre_alloc_hook to post_alloc_hook.
Then in case of successful allocation(s) it's getting stored in the
page->obj_cgroups vector.
The objcg obtaining part look a bit bulky now, but it will be simplified
by next commits in the series.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-9-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allocate and release memory to store obj_cgroup pointers for each non-root
slab page. Reuse page->mem_cgroup pointer to store a pointer to the
allocated space.
This commit temporarily increases the memory footprint of the kernel memory
accounting. To store obj_cgroup pointers we'll need a place for an
objcg_pointer for each allocated object. However, the following patches
in the series will enable sharing of slab pages between memory cgroups,
which will dramatically increase the total slab utilization. And the final
memory footprint will be significantly smaller than before.
To distinguish between obj_cgroups and memcg pointers in case when it's
not obvious which one is used (as in page_cgroup_ino()), let's always set
the lowest bit in the obj_cgroup case. The original obj_cgroups
pointer is marked to be ignored by kmemleak, which otherwise would
report a memory leak for each allocated vector.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-8-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Obj_cgroup API provides an ability to account sub-page sized kernel
objects, which potentially outlive the original memory cgroup.
The top-level API consists of the following functions:
bool obj_cgroup_tryget(struct obj_cgroup *objcg);
void obj_cgroup_get(struct obj_cgroup *objcg);
void obj_cgroup_put(struct obj_cgroup *objcg);
int obj_cgroup_charge(struct obj_cgroup *objcg, gfp_t gfp, size_t size);
void obj_cgroup_uncharge(struct obj_cgroup *objcg, size_t size);
struct mem_cgroup *obj_cgroup_memcg(struct obj_cgroup *objcg);
struct obj_cgroup *get_obj_cgroup_from_current(void);
Object cgroup is basically a pointer to a memory cgroup with a per-cpu
reference counter. It substitutes a memory cgroup in places where it's
necessary to charge a custom amount of bytes instead of pages.
All charged memory rounded down to pages is charged to the corresponding
memory cgroup using __memcg_kmem_charge().
It implements reparenting: on memcg offlining it's getting reattached to
the parent memory cgroup. Each online memory cgroup has an associated
active object cgroup to handle new allocations and the list of all
attached object cgroups. On offlining of a cgroup this list is reparented
and for each object cgroup in the list the memcg pointer is swapped to the
parent memory cgroup. It prevents long-living objects from pinning the
original memory cgroup in the memory.
The implementation is based on byte-sized per-cpu stocks. A sub-page
sized leftover is stored in an atomic field, which is a part of obj_cgroup
object. So on cgroup offlining the leftover is automatically reparented.
memcg->objcg is rcu protected. objcg->memcg is a raw pointer, which is
always pointing at a memory cgroup, but can be atomically swapped to the
parent memory cgroup. So a user must ensure the lifetime of the
cgroup, e.g. grab rcu_read_lock or css_set_lock.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-7-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The reference counting of a memcg is currently coupled directly to how
many 4k pages are charged to it. This doesn't work well with Roman's new
slab controller, which maintains pools of objects and doesn't want to keep
an extra balance sheet for the pages backing those objects.
This unusual refcounting design (reference counts usually track pointers
to an object) is only for historical reasons: memcg used to not take any
css references and simply stalled offlining until all charges had been
reparented and the page counters had dropped to zero. When we got rid of
the reparenting requirement, the simple mechanical translation was to take
a reference for every charge.
More historical context can be found in commit e8ea14cc6ead ("mm:
memcontrol: take a css reference for each charged page"), commit
64f219938941 ("mm: memcontrol: remove obsolete kmemcg pinning tricks") and
commit b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined
groups").
The new slab controller exposes the limitations in this scheme, so let's
switch it to a more idiomatic reference counting model based on actual
kernel pointers to the memcg:
- The per-cpu stock holds a reference to the memcg its caching
- User pages hold a reference for their page->mem_cgroup. Transparent
huge pages will no longer acquire tail references in advance, we'll
get them if needed during the split.
- Kernel pages hold a reference for their page->mem_cgroup
- Pages allocated in the root cgroup will acquire and release css
references for simplicity. css_get() and css_put() optimize that.
- The current memcg_charge_slab() already hacked around the per-charge
references; this change gets rid of that as well.
- tcp accounting will handle reference in mem_cgroup_sk_{alloc,free}
Roman:
1) Rebased on top of the current mm tree: added css_get() in
mem_cgroup_charge(), dropped mem_cgroup_try_charge() part
2) I've reformatted commit references in the commit log to make
checkpatch.pl happy.
[hughd@google.com: remove css_put_many() from __mem_cgroup_clear_mc()]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007302011450.2347@eggly.anvils
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200623174037.3951353-6-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit implements SLUB version of the obj_to_index() function, which
will be required to calculate the offset of obj_cgroup in the obj_cgroups
vector to store/obtain the objcg ownership data.
To make it faster, let's repeat the SLAB's trick introduced by commit
6a2d7a955d8d ("SLAB: use a multiply instead of a divide in
obj_to_index()") and avoid an expensive division.
Vlastimil Babka noticed, that SLUB does have already a similar function
called slab_index(), which is defined only if SLUB_DEBUG is enabled. The
function does a similar math, but with a division, and it also takes a
page address instead of a page pointer.
Let's remove slab_index() and replace it with the new helper
__obj_to_index(), which takes a page address. obj_to_index() will be a
simple wrapper taking a page pointer and passing page_address(page) into
__obj_to_index().
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.
To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).
Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes. This scheme may look weird, but
only for now. As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages. However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.
The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To implement per-object slab memory accounting, we need to convert slab
vmstat counters to bytes. Actually, out of 4 levels of counters: global,
per-node, per-memcg and per-lruvec only two last levels will require
byte-sized counters. It's because global and per-node counters will be
counting the number of slab pages, and per-memcg and per-lruvec will be
counting the amount of memory taken by charged slab objects.
Converting all vmstat counters to bytes or even all slab counters to bytes
would introduce an additional overhead. So instead let's store global and
per-node counters in pages, and memcg and lruvec counters in bytes.
To make the API clean all access helpers (both on the read and write
sides) are dealing with bytes.
To avoid back-and-forth conversions a new flavor of read-side helpers is
introduced, which always returns values in pages: node_page_state_pages()
and global_node_page_state_pages().
Actually new helpers are just reading raw values. Old helpers are simple
wrappers, which will complain on an attempt to read byte value, because at
the moment no one actually needs bytes.
Thanks to Johannes Weiner for the idea of having the byte-sized API on top
of the page-sized internal storage.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__mod_lruvec_state()
Patch series "The new cgroup slab memory controller", v7.
The patchset moves the accounting from the page level to the object level.
It allows to share slab pages between memory cgroups. This leads to a
significant win in the slab utilization (up to 45%) and the corresponding
drop in the total kernel memory footprint. The reduced number of
unmovable slab pages should also have a positive effect on the memory
fragmentation.
The patchset makes the slab accounting code simpler: there is no more need
in the complicated dynamic creation and destruction of per-cgroup slab
caches, all memory cgroups use a global set of shared slab caches. The
lifetime of slab caches is not more connected to the lifetime of memory
cgroups.
The more precise accounting does require more CPU, however in practice the
difference seems to be negligible. We've been using the new slab
controller in Facebook production for several months with different
workloads and haven't seen any noticeable regressions. What we've seen
were memory savings in order of 1 GB per host (it varied heavily depending
on the actual workload, size of RAM, number of CPUs, memory pressure,
etc).
The third version of the patchset added yet another step towards the
simplification of the code: sharing of slab caches between accounted and
non-accounted allocations. It comes with significant upsides (most
noticeable, a complete elimination of dynamic slab caches creation) but
not without some regression risks, so this change sits on top of the
patchset and is not completely merged in. So in the unlikely event of a
noticeable performance regression it can be reverted separately.
The slab memory accounting works in exactly the same way for SLAB and
SLUB. With both allocators the new controller shows significant memory
savings, with SLUB the difference is bigger. On my 16-core desktop
machine running Fedora 32 the size of the slab memory measured after the
start of the system was lower by 58% and 38% with SLUB and SLAB
correspondingly.
As an estimation of a potential CPU overhead, below are results of
slab_bulk_test01 test, kindly provided by Jesper D. Brouer. He also
helped with the evaluation of results.
The test can be found here: https://github.com/netoptimizer/prototype-kernel/
The smallest number in each row should be picked for a comparison.
SLUB-patched - bulk-API
- SLUB-patched : bulk_quick_reuse objects=1 : 187 - 90 - 224 cycles(tsc)
- SLUB-patched : bulk_quick_reuse objects=2 : 110 - 53 - 133 cycles(tsc)
- SLUB-patched : bulk_quick_reuse objects=3 : 88 - 95 - 42 cycles(tsc)
- SLUB-patched : bulk_quick_reuse objects=4 : 91 - 85 - 36 cycles(tsc)
- SLUB-patched : bulk_quick_reuse objects=8 : 32 - 66 - 32 cycles(tsc)
SLUB-original - bulk-API
- SLUB-original: bulk_quick_reuse objects=1 : 87 - 87 - 142 cycles(tsc)
- SLUB-original: bulk_quick_reuse objects=2 : 52 - 53 - 53 cycles(tsc)
- SLUB-original: bulk_quick_reuse objects=3 : 42 - 42 - 91 cycles(tsc)
- SLUB-original: bulk_quick_reuse objects=4 : 91 - 37 - 37 cycles(tsc)
- SLUB-original: bulk_quick_reuse objects=8 : 31 - 79 - 76 cycles(tsc)
SLAB-patched - bulk-API
- SLAB-patched : bulk_quick_reuse objects=1 : 67 - 67 - 140 cycles(tsc)
- SLAB-patched : bulk_quick_reuse objects=2 : 55 - 46 - 46 cycles(tsc)
- SLAB-patched : bulk_quick_reuse objects=3 : 93 - 94 - 39 cycles(tsc)
- SLAB-patched : bulk_quick_reuse objects=4 : 35 - 88 - 85 cycles(tsc)
- SLAB-patched : bulk_quick_reuse objects=8 : 30 - 30 - 30 cycles(tsc)
SLAB-original- bulk-API
- SLAB-original: bulk_quick_reuse objects=1 : 143 - 136 - 67 cycles(tsc)
- SLAB-original: bulk_quick_reuse objects=2 : 45 - 46 - 46 cycles(tsc)
- SLAB-original: bulk_quick_reuse objects=3 : 38 - 39 - 39 cycles(tsc)
- SLAB-original: bulk_quick_reuse objects=4 : 35 - 87 - 87 cycles(tsc)
- SLAB-original: bulk_quick_reuse objects=8 : 29 - 66 - 30 cycles(tsc)
This patch (of 19):
To convert memcg and lruvec slab counters to bytes there must be a way to
change these counters without touching node counters. Factor out
__mod_memcg_lruvec_state() out of __mod_lruvec_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200623174037.3951353-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Historically the kernel memory accounting was an opt-in feature, which
could be enabled for individual cgroups. But now it's not true, and it's
on by default both on cgroup v1 and cgroup v2. And as long as a user has
at least one non-root memory cgroup, the kernel memory accounting is on.
So in most setups it's either always on (if memory cgroups are in use and
kmem accounting is not disabled), either always off (otherwise).
memcg_kmem_enabled() is used in many places to guard the kernel memory
accounting code. If memcg_kmem_enabled() can reverse from returning true
to returning false (as now), we can't rely on it on release paths and have
to check if it was on before.
If we'll make memcg_kmem_enabled() irreversible (always returning true
after returning it for the first time), it'll make the general logic more
simple and robust. It also will allow to guard some checks which
otherwise would stay unguarded.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200702180926.1330769-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The default is still set to inode32 for backwards compatibility, but
system administrators can opt in to the new 64-bit inode numbers by
either:
1. Passing inode64 on the command line when mounting, or
2. Configuring the kernel with CONFIG_TMPFS_INODE64=y
The inode64 and inode32 names are used based on existing precedent from
XFS.
[hughd@google.com: Kconfig fixes]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008011928010.13320@eggly.anvils
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/8b23758d0c66b5e2263e08baf9c4b6a7565cbd8f.1594661218.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "tmpfs: inode: Reduce risk of inum overflow", v7.
In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On
affected tiers, in excess of 10% of hosts show multiple files with
different content and the same inode number, with some servers even having
as many as 150 duplicated inode numbers with differing file content.
This causes actual, tangible problems in production. For example, we have
complaints from those working on remote caches that their application is
reporting cache corruptions because it uses (device, inodenum) to
establish the identity of a particular cache object, but because it's not
unique any more, the application refuses to continue and reports cache
corruption. Even worse, sometimes applications may not even detect the
corruption but may continue anyway, causing phantom and hard to debug
behaviour.
In general, userspace applications expect that (device, inodenum) should
be enough to be uniquely point to one inode, which seems fair enough. One
might also need to check the generation, but in this case:
1. That's not currently exposed to userspace
(ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs);
2. Even with generation, there shouldn't be two live inodes with the
same inode number on one device.
In order to mitigate this, we take a two-pronged approach:
1. Moving inum generation from being global to per-sb for tmpfs. This
itself allows some reduction in i_ino churn. This works on both 64-
and 32- bit machines.
2. Adding inode{64,32} for tmpfs. This fix is supported on machines with
64-bit ino_t only: we allow users to mount tmpfs with a new inode64
option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64.
You can see how this compares to previous related patches which didn't
implement this per-superblock:
- https://patchwork.kernel.org/patch/11254001/
- https://patchwork.kernel.org/patch/11023915/
This patch (of 2):
get_next_ino has a number of problems:
- It uses and returns a uint, which is susceptible to become overflowed
if a lot of volatile inodes that use get_next_ino are created.
- It's global, with no specificity per-sb or even per-filesystem. This
means it's not that difficult to cause inode number wraparounds on a
single device, which can result in having multiple distinct inodes
with the same inode number.
This patch adds a per-superblock counter that mitigates the second case.
This design also allows us to later have a specific i_ino size per-device,
for example, allowing users to choose whether to use 32- or 64-bit inodes
for each tmpfs mount. This is implemented in the next commit.
For internal shmem mounts which may be less tolerant to spinlock delays,
we implement a percpu batching scheme which only takes the stat_lock at
each batch boundary.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name
Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
swap_readpage() does the sync io for one page, the io is not big,
normally, the io can be finished quickly, but it may take long time or
wait forever in case of io failure or discard.
This patch uses blk_io_schedule() instead of io_schedule() to avoid task
hung and crash (when set /proc/sys/kernel/hung_task_panic) when the above
exception occurs.
This is similar to the hung task avoidance in submit_bio_wait(),
blk_execute_rq() and __blkdev_direct_IO().
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1596461807-21087-1-git-send-email-xianting_tian@126.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix W=1 compile warnings (invalid kerneldoc):
mm/swap_state.c:742: warning: Function parameter or member 'fentry' not described in 'swap_vma_readahead'
mm/swap_state.c:742: warning: Excess function parameter 'entry' description in 'swap_vma_readahead'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200728171109.28687-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because enable_swap_slots_cache can only become true in
enable_swap_slots_cache(), and depends on swap_slot_cache_initialized is
true before. That means, when enable_swap_slots_cache is true,
swap_slot_cache_initialized is true also.
So the condition:
"swap_slot_cache_enabled && swap_slot_cache_initialized"
can be reduced to "swap_slot_cache_enabled"
And in mathematics:
"!swap_slot_cache_enabled || !swap_slot_cache_initialized"
is equal to "!(swap_slot_cache_enabled && swap_slot_cache_initialized)"
So no functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-4-thunder.leizhen@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Whether swap_slot_cache_initialized is true or false,
__reenable_swap_slots_cache() is always called. To make this meaning
clear, leave only one call to __reenable_swap_slots_cache(). This also
make it clearer what extra needs be done when swap_slot_cache_initialized
is false.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-3-thunder.leizhen@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "clean up some functions in mm/swap_slots.c".
When I studied the code of mm/swap_slots.c, I found some places can be
improved.
This patch (of 3):
Both "slots" and "slots_ret" are only need to be freed when cache already
allocated. Make them closer, seems more clear.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200430061143.450-1-thunder.leizhen@huawei.com
Link: http://lkml.kernel.org/r/20200430061143.450-2-thunder.leizhen@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The return value of populate_vma_page_range() is consistent with
__get_user_pages(), and so is the function comment of return value.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lkml.kernel.org/r/20200720034303.29920-1-tangyizhou@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
FGP_{WRITE|NOFS|NOWAIT} were missed in pagecache_get_page's kerneldoc
comment.
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Gang Deng <gavin.dg@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/1593031747-4249-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit bbddabe2e436aa ("mm: filemap: only do access activations on
reads"), mark_page_accessed() is called for reads only. But the idle flag
is cleared by mark_page_accessed() so the idle flag won't get cleared if
the page is write accessed only.
Basically idle page tracking is used to estimate workingset size of
workload, noticeable size of workingset might be missed if the idle flag
is not maintained correctly.
It seems good enough to just clear idle flag for write operations.
Fixes: bbddabe2e436 ("mm: filemap: only do access activations on reads")
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/1593020612-13051-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a compound page is being split while dump_page() is being run on that
page, we can end up calling compound_mapcount() on a page that is no
longer compound. This leads to a crash (already seen at least once in the
field), due to the VM_BUG_ON_PAGE() assertion inside compound_mapcount().
(The above is from Matthew Wilcox's analysis of Qian Cai's bug report.)
A similar problem is possible, via compound_pincount() instead of
compound_mapcount().
In order to avoid this kind of crash, make dump_page() slightly more
robust, by providing a pair of simpler routines that don't contain
assertions: head_mapcount() and head_pincount().
For debug tools, we don't want to go *too* far in this direction, but this
is a simple small fix, and the crash has already been seen, so it's a good
trade-off.
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200804214807.169256-1-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The actual address of the struct page isn't particularly helpful, while
the hashed address helps match with other messages elsewhere. Add the PFN
that the page refers to in order to help diagnose problems where the page
is improperly aligned for the purpose.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-7-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The inode number helps correlate this page with debug messages elsewhere
in the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is simpler to use than copy_from_kernel_nofault(). Also make some of
the related error messages less verbose.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-5-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Tail page flags contain very little useful information. Print the head
page's flags instead. While the flags will contain "head" for tail pages,
this should not be too confusing as the previous line starts with the word
"head:" and so the flags should be interpreted as belonging to the head
page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-4-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Simplify both the implementation and the output by splitting all the
compound page information onto a second line.
Reported-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Link: http://lkml.kernel.org/r/20200709202117.7216-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Improvements for dump_page()", v2.
Here's a sample dump of a pagecache tail page with all of the patches
applied:
page:000000006d1c49ca refcount:6 mapcount:0 mapping:00000000136b8d90 index:0x109 pfn:0x6c645
head:000000008bd38076 order:2 compound_mapcount:0 compound_pincount:0
aops:xfs_address_space_operations ino:800042 dentry name:"fd"
flags: 0x4000000000012014(uptodate|lru|private|head)
raw: 4000000000000000 ffffd46ac1b19101 ffffffff00000202 dead000000000004
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
head: 4000000000012014 ffffd46ac1b1bbc8 ffffd46ac1b1bc08 ffff91976f659560
head: 0000000000000108 ffff919773220680 00000006ffffffff 0000000000000000
page dumped because: testing
This patch (of 6):
If we can't call page_mapping() to get the page mapping, handle the
anon/ksm/movable bits correctly.
[akpm@linux-foundation.org: augmented code comment from John]
Link: http://lkml.kernel.org/r/15cff11a-6762-8a6a-3f0e-dd227280cd6f@nvidia.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Link: http://lkml.kernel.org/r/20200709202117.7216-1-willy@infradead.org
Link: http://lkml.kernel.org/r/20200709202117.7216-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds a specific description file for all arch page table helpers which
is in sync with the semantics being tested via CONFIG_DEBUG_VM_PGTABLE. All
future changes either to these descriptions here or the debug test should
always remain in sync.
[anshuman.khandual@arm.com: fold in Mike's patch for the rst document, fix typos in the rst document]
Link: http://lkml.kernel.org/r/1594610587-4172-5-git-send-email-anshuman.khandual@arm.com
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/1593996516-7186-5-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds debug print information that enlists all tests getting executed
on a given platform. With dynamic debug enabled, the following
information will be splashed during boot. For compactness purpose,
dropped both time stamp and prefix (i.e debug_vm_pgtable) from this sample
output.
[debug_vm_pgtable ]: Validating architecture page table helpers
[pte_basic_tests ]: Validating PTE basic
[pmd_basic_tests ]: Validating PMD basic
[p4d_basic_tests ]: Validating P4D basic
[pgd_basic_tests ]: Validating PGD basic
[pte_clear_tests ]: Validating PTE clear
[pmd_clear_tests ]: Validating PMD clear
[pte_advanced_tests ]: Validating PTE advanced
[pmd_advanced_tests ]: Validating PMD advanced
[hugetlb_advanced_tests]: Validating HugeTLB advanced
[pmd_leaf_tests ]: Validating PMD leaf
[pmd_huge_tests ]: Validating PMD huge
[pte_savedwrite_tests ]: Validating PTE saved write
[pmd_savedwrite_tests ]: Validating PMD saved write
[pmd_populate_tests ]: Validating PMD populate
[pte_special_tests ]: Validating PTE special
[pte_protnone_tests ]: Validating PTE protnone
[pmd_protnone_tests ]: Validating PMD protnone
[pte_devmap_tests ]: Validating PTE devmap
[pmd_devmap_tests ]: Validating PMD devmap
[pte_swap_tests ]: Validating PTE swap
[swap_migration_tests ]: Validating swap migration
[hugetlb_basic_tests ]: Validating HugeTLB basic
[pmd_thp_tests ]: Validating PMD based THP
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Link: http://lkml.kernel.org/r/1593996516-7186-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds new tests validating for these following arch advanced page
table helpers. These tests create and test specific mapping types at
various page table levels.
1. pxxp_set_wrprotect()
2. pxxp_get_and_clear()
3. pxxp_set_access_flags()
4. pxxp_get_and_clear_full()
5. pxxp_test_and_clear_young()
6. pxx_leaf()
7. pxx_set_huge()
8. pxx_(clear|mk)_savedwrite()
9. huge_pxxp_xxx()
[anshuman.khandual@arm.com: drop RANDOM_ORVALUE from hugetlb_advanced_tests()]
Link: http://lkml.kernel.org/r/1594610587-4172-3-git-send-email-anshuman.khandual@arm.com
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Link: http://lkml.kernel.org/r/1593996516-7186-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/debug_vm_pgtable: Add some more tests", v5.
This series adds some more arch page table helper validation tests which
are related to core and advanced memory functions. This also creates a
documentation, enlisting expected semantics for all page table helpers as
suggested by Mike Rapoport previously
(https://lkml.org/lkml/2020/1/30/40).
There are many TRANSPARENT_HUGEPAGE and ARCH_HAS_TRANSPARENT_HUGEPAGE_PUD
ifdefs scattered across the test. But consolidating all the fallback
stubs is not very straight forward because
ARCH_HAS_TRANSPARENT_HUGEPAGE_PUD is not explicitly dependent on
ARCH_HAS_TRANSPARENT_HUGEPAGE.
Tested on arm64, x86 platforms but only build tested on all other enabled
platforms through ARCH_HAS_DEBUG_VM_PGTABLE i.e powerpc, arc, s390. The
following failure on arm64 still exists which was mentioned previously.
It will be fixed with the upcoming THP migration on arm64 enablement
series.
WARNING .... mm/debug_vm_pgtable.c:860 debug_vm_pgtable+0x940/0xa54
WARN_ON(!pmd_present(pmd_mkinvalid(pmd_mkhuge(pmd))))
This patch (of 4):
This adds new tests validating arch page table helpers for these following
core memory features. These tests create and test specific mapping types
at various page table levels.
1. SPECIAL mapping
2. PROTNONE mapping
3. DEVMAP mapping
4. SOFTDIRTY mapping
5. SWAP mapping
6. MIGRATION mapping
7. HUGETLB mapping
8. THP mapping
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Link: http://lkml.kernel.org/r/1594610587-4172-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1593996516-7186-1-git-send-email-anshuman.khandual@arm.com
Link: http://lkml.kernel.org/r/1593996516-7186-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide the necessary KCSAN checks to assist with debugging racy
use-after-frees. While KASAN is more reliable at generally catching such
use-after-frees (due to its use of a quarantine), it can be difficult to
debug racy use-after-frees. If a reliable reproducer exists, KCSAN can
assist in debugging such issues.
Note: ASSERT_EXCLUSIVE_ACCESS is a convenience wrapper if the size is
simply sizeof(var). Instead, here we just use __kcsan_check_access()
explicitly to pass the correct size.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200623072653.114563-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no point in using lockdep_assert_held() unlock that is about to
be unlocked. It works only with lockdep and lockdep will complain if
spin_unlock() is used on a lock that has not been locked.
Remove superfluous lockdep_assert_held().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200618201234.795692-2-bigeasy@linutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cache_from_obj() was added by commit b9ce5ef49f00 ("sl[au]b: always get
the cache from its page in kmem_cache_free()") to support kmemcg, where
per-memcg cache can be different from the root one, so we can't use the
kmem_cache pointer given to kmem_cache_free().
Prior to that commit, SLUB already had debugging check+warning that could
be enabled to compare the given kmem_cache pointer to one referenced by
the slab page where the object-to-be-freed resides. This check was moved
to cache_from_obj(). Later the check was also enabled for
SLAB_FREELIST_HARDENED configs by commit 598a0717a816 ("mm/slab: validate
cache membership under freelist hardening").
These checks and warnings can be useful especially for the debugging,
which can be improved. Commit 598a0717a816 changed the pr_err() with
WARN_ON_ONCE() to WARN_ONCE() so only the first hit is now reported,
others are silent. This patch changes it to WARN() so that all errors are
reported.
It's also useful to print SLUB allocation/free tracking info for the
offending object, if tracking is enabled. Thus, export the SLUB
print_tracking() function and provide an empty one for SLAB.
For SLUB we can also benefit from the static key check in
kmem_cache_debug_flags(), but we need to move this function to slab.h and
declare the static key there.
[1] https://lore.kernel.org/r/20200608230654.828134-18-guro@fb.com
[vbabka@suse.cz: avoid bogus WARN()]
Link: https://lore.kernel.org/r/20200623090213.GW5535@shao2-debian
Link: http://lkml.kernel.org/r/b33e0fa7-cd28-4788-9e54-5927846329ef@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Link: http://lkml.kernel.org/r/afeda7ac-748b-33d8-a905-56b708148ad5@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function cache_from_obj() was added by commit b9ce5ef49f00 ("sl[au]b:
always get the cache from its page in kmem_cache_free()") to support
kmemcg, where per-memcg cache can be different from the root one, so we
can't use the kmem_cache pointer given to kmem_cache_free().
Prior to that commit, SLUB already had debugging check+warning that could
be enabled to compare the given kmem_cache pointer to one referenced by
the slab page where the object-to-be-freed resides. This check was moved
to cache_from_obj(). Later the check was also enabled for
SLAB_FREELIST_HARDENED configs by commit 598a0717a816 ("mm/slab: validate
cache membership under freelist hardening").
These checks and warnings can be useful especially for the debugging,
which can be improved. Commit 598a0717a816 changed the pr_err() with
WARN_ON_ONCE() to WARN_ONCE() so only the first hit is now reported,
others are silent. This patch changes it to WARN() so that all errors are
reported.
It's also useful to print SLUB allocation/free tracking info for the
offending object, if tracking is enabled. We could export the SLUB
print_tracking() function and provide an empty one for SLAB, or realize
that both the debugging and hardening cases in cache_from_obj() are only
supported by SLUB anyway. So this patch moves cache_from_obj() from
slab.h to separate instances in slab.c and slub.c, where the SLAB version
only does the kmemcg lookup and even could be completely removed once the
kmemcg rework [1] is merged. The SLUB version can thus easily use the
print_tracking() function. It can also use the kmem_cache_debug_flags()
static key check for improved performance in kernels without the hardening
and with debugging not enabled on boot.
[1] https://lore.kernel.org/r/20200608230654.828134-18-guro@fb.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-10-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are few more places in SLUB that could benefit from reduced overhead
of the static key introduced by a previous patch:
- setup_object_debug() called on each object in newly allocated slab page
- setup_page_debug() called on newly allocated slab page
- __free_slab() called on freed slab page
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-9-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are few places that call kmem_cache_debug(s) (which tests if any of
debug flags are enabled for a cache) immediately followed by a test for a
specific flag. The compiler can probably eliminate the extra check, but
we can make the code nicer by introducing kmem_cache_debug_flags() that
works like kmem_cache_debug() (including the static key check) but tests
for specific flag(s). The next patches will add more users.
[vbabka@suse.cz: change return from int to bool, per Kees. Add VM_WARN_ON_ONCE() for invalid flags, per Roman]
Link: http://lkml.kernel.org/r/949b90ed-e0f0-07d7-4d21-e30ec0958a7c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-8-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
One advantage of CONFIG_SLUB_DEBUG is that a generic distro kernel can be
built with the option enabled, but it's inactive until simply enabled on
boot, without rebuilding the kernel. With a static key, we can further
eliminate the overhead of checking whether a cache has a particular debug
flag enabled if we know that there are no such caches (slub_debug was not
enabled during boot). We use the same mechanism also for e.g.
page_owner, debug_pagealloc or kmemcg functionality.
This patch introduces the static key and makes the general check for
per-cache debug flags kmem_cache_debug() use it. This benefits several
call sites, including (slow path but still rather frequent) __slab_free().
The next patches will add more uses.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-7-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The attribute reflects the SLAB_RECLAIM_ACCOUNT cache flag. It's not
clear why this attribute was writable in the first place, as it's tied to
how the cache is used by its creator, it's not a user tunable.
Furthermore:
- it affects slab merging, but that's not being checked while toggled
- if affects whether __GFP_RECLAIMABLE flag is used to allocate page, but
the runtime toggle doesn't update allocflags
- it affects cache_vmstat_idx() so runtime toggling might lead to incosistency
of NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE
Thus make it read-only.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-6-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SLUB_DEBUG creates several files under /sys/kernel/slab/<cache>/ that can
be read to check if the respective debugging options are enabled for given
cache. Some options, namely sanity_checks, trace, and failslab can be
also enabled and disabled at runtime by writing into the files.
The runtime toggling is racy. Some options disable __CMPXCHG_DOUBLE when
enabled, which means that in case of concurrent allocations, some can
still use __CMPXCHG_DOUBLE and some not, leading to potential corruption.
The s->flags field is also not updated or checked atomically. The
simplest solution is to remove the runtime toggling. The extended
slub_debug boot parameter syntax introduced by earlier patch should allow
to fine-tune the debugging configuration during boot with same
granularity.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-5-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SLUB allows runtime changing of page allocation order by writing into the
/sys/kernel/slab/<cache>/order file. Jann has reported [1] that this
interface allows the order to be set too small, leading to crashes.
While it's possible to fix the immediate issue, closer inspection reveals
potential races. Storing the new order calls calculate_sizes() which
non-atomically updates a lot of kmem_cache fields while the cache is still
in use. Unexpected behavior might occur even if the fields are set to the
same value as they were.
This could be fixed by splitting out the part of calculate_sizes() that
depends on forced_order, so that we only update kmem_cache.oo field. This
could still race with init_cache_random_seq(), shuffle_freelist(),
allocate_slab(). Perhaps it's possible to audit and e.g. add some
READ_ONCE/WRITE_ONCE accesses, it might be easier just to remove the
runtime order changes, which is what this patch does. If there are valid
usecases for per-cache order setting, we could e.g. extend the boot
parameters to do that.
[1] https://lore.kernel.org/r/CAG48ez31PP--h6_FzVyfJ4H86QYczAFPdxtJHUEEan+7VJETAQ@mail.gmail.com
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-4-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SLUB_DEBUG creates several files under /sys/kernel/slab/<cache>/ that can
be read to check if the respective debugging options are enabled for given
cache. The options can be also toggled at runtime by writing into the
files. Some of those, namely red_zone, poison, and store_user can be
toggled only when no objects yet exist in the cache.
Vijayanand reports [1] that there is a problem with freelist randomization
if changing the debugging option's state results in different number of
objects per page, and the random sequence cache needs thus needs to be
recomputed.
However, another problem is that the check for "no objects yet exist in
the cache" is racy, as noted by Jann [2] and fixing that would add
overhead or otherwise complicate the allocation/freeing paths. Thus it
would be much simpler just to remove the runtime toggling support. The
documentation describes it's "In case you forgot to enable debugging on
the kernel command line", but the neccessity of having no objects limits
its usefulness anyway for many caches.
Vijayanand describes an use case [3] where debugging is enabled for all
but zram caches for memory overhead reasons, and using the runtime toggles
was the only way to achieve such configuration. After the previous patch
it's now possible to do that directly from the kernel boot option, so we
can remove the dangerous runtime toggles by making the /sys attribute
files read-only.
While updating it, also improve the documentation of the debugging /sys files.
[1] https://lkml.kernel.org/r/1580379523-32272-1-git-send-email-vjitta@codeaurora.org
[2] https://lore.kernel.org/r/CAG48ez31PP--h6_FzVyfJ4H86QYczAFPdxtJHUEEan+7VJETAQ@mail.gmail.com
[3] https://lore.kernel.org/r/1383cd32-1ddc-4dac-b5f8-9c42282fa81c@codeaurora.org
Reported-by: Vijayanand Jitta <vjitta@codeaurora.org>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20200610163135.17364-3-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "slub_debug fixes and improvements".
The slub_debug kernel boot parameter can either apply a single set of
options to all caches or a list of caches. There is a use case where
debugging is applied for all caches and then disabled at runtime for
specific caches, for performance and memory consumption reasons [1]. As
runtime changes are dangerous, extend the boot parameter syntax so that
multiple blocks of either global or slab-specific options can be
specified, with blocks delimited by ';'. This will also support the use
case of [1] without runtime changes.
For details see the updated Documentation/vm/slub.rst
[1] https://lore.kernel.org/r/1383cd32-1ddc-4dac-b5f8-9c42282fa81c@codeaurora.org
[weiyongjun1@huawei.com: make parse_slub_debug_flags() static]
Link: http://lkml.kernel.org/r/20200702150522.4940-1-weiyongjun1@huawei.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jann Horn <jannh@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200610163135.17364-2-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
