summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-09-20net_sched: add u64 rate to psched_ratecfg_precompute()Eric Dumazet5-10/+18
Add an extra u64 rate parameter to psched_ratecfg_precompute() so that some qdisc can opt-in for 64bit rates in the future, to overcome the ~34 Gbits limit. psched_ratecfg_getrate() reports a legacy structure to tc utility, so if actual rate is above the 32bit rate field, cap it to the 34Gbit limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: ethernet: eth.c: removed checkpatch warnings and errorsAvinash Kumar1-3/+3
removed these checkpatch.pl warnings: net/ethernet/eth.c:61: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> net/ethernet/eth.c:136: WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... net/ethernet/eth.c:181: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: cdc-phonet: Staticize usbpn_probeSachin Kamat1-1/+1
'usbpn_probe' is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Rémi Denis-Courmont <remi@remlab.net> Cc: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: cxgb4vf: Staticize local symbolsSachin Kamat1-5/+6
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: bnx2x: Staticize local symbolsSachin Kamat1-3/+4
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: emaclite: Code cleanupMichal Simek1-14/+14
No function changes (s/\ \t/\t/g) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: emaclite: Not necessary to call devm_iounmapMichal Simek1-8/+3
devm_iounmap is called automatically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20sfc: Support ARFS for IPv6 flowsBen Hutchings1-28/+62
Extend efx_filter_rfs() to map TCP/IPv6 and UDP/IPv6 flows into efx_filter_spec. These are only supported on EF10; on Falcon and Siena they will be rejected by efx_farch_filter_from_gen_spec(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Use TX PIO for sufficiently small packetsJon Cooper4-0/+155
Sufficiently small linear packets can be copied into the PIO buffer with a single call to memcpy_toio(). Non-linear packets require an intermediate cache-line-sized buffer. [bwh: I wrote the first version of this, but Jon did the hard work to handle non-linear packets.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Introduce inline functions to simplify TX insertionBen Hutchings1-20/+33
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Separate out queue-empty check from efx_nic_may_push_tx_desc()Ben Hutchings1-6/+22
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Allocate and link PIO buffers; map them with write-combiningBen Hutchings6-3/+353
Try to allocate a segment of PIO buffer to each TX channel. If allocation fails, log an error but continue. PIO buffers must be mapped separately from the NIC registers, with write-combining enabled. Where the host page size is 4K, we could potentially map each VI's registers and PIO buffer separately. However, this would add significant complexity, and we also need to support architectures such as POWER which have a greater page size. So make a single contiguous write-combining mapping after the uncacheable mapping, aligned to the host page size, and link PIO buffers there. Where necessary, allocate additional VIs within the write-combining mapping purely for access to PIO buffers. Link all TX buffers to TX queues and the additional VIs in efx_ef10_dimension_resources() and in efx_ef10_init_nic() after an MC reboot. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Implement firmware-assisted TSO for EF10Ben Hutchings1-52/+121
Segmentation remains in the driver, but we generate option descriptors describing the required packet editing rather than making our own copies. Reduce tso_state::ipv4_id to 16 bits, so it doesn't overflow into the TCP_FLAGS field of the option descriptor. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Fold tso_get_head_fragment() into tso_start()Ben Hutchings1-31/+31
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Add EF10 registers to register dumpBen Hutchings1-31/+42
There are very few readable registers, but we may as well report them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: efx_ef10_filter_update_rx_scatter() can be staticFengguang Wu1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: efx_ethtool_get_ts_info() can be staticFengguang Wu1-2/+2
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20Merge tag 'arm64-stable' of ↵Linus Torvalds5-15/+26
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Compat register fault reporting fix - Documentation clarification on tagged pointers - hwcap widened to 64-bit (user space already reading it as 64-bit) * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Widen hwcap to be 64 bit arm64: Correctly report LR and SP for compat tasks arm64: documentation: tighten up tagged pointer documentation arm64: Make do_bad_area() function static
2013-09-20arm64: Widen hwcap to be 64 bitSteve Capper2-2/+2
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit. This patch widens elf_hwcap to be 64 bit. Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: Correctly report LR and SP for compat tasksCatalin Marinas1-5/+16
When a task crashes and we print debugging information, ensure that compat tasks show the actual AArch32 LR and SP registers rather than the AArch64 ones. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: documentation: tighten up tagged pointer documentationWill Deacon1-7/+7
Commit d50240a5f6ce ("arm64: mm: permit use of tagged pointers at EL0") added support for tagged pointers in userspace, but the corresponding update to Documentation/ contained some imprecise statements. This patch fixes up some minor ambiguities in the text, hopefully making it more clear about exactly what the kernel expects from user virtual addresses. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20arm64: Make do_bad_area() function staticCatalin Marinas1-1/+1
This function is only called from arch/arm64/mm/fault.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-20Merge tag 'fixes-for-linus' of ↵Linus Torvalds27-289/+418
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes for ARM platforms for 3.12. Among them: - A fix for build breakage in the MTD subsystem for some PXA devices. David Woodhouse has this patch in his for-next branch but has not been responding to our requests to send it up so here it is. I should have amended the commit message to describe the build failure for CONFIG_OF=n setups, but forgot and now it's down in the stack of commits. - Added device-tree for the BeagleBone Black. Turns out people have been using the older "regualar" bone DT for the newer boards, and there's risk of damaging hardware that way. - Misc DT and regular fixes for OMAP. - Fix to make the ST-Ericsson "snowball" boards boot with multi_v7_defconfig, and enable one of the ST-E reference boards on the same config. - Kconfig cleanup for u300 to hide submenus when the platform isn't enabled. - Enable ARM_ATAG_DTB_COMPAT to let firmware override command line when booting with an appended devicetree on non-DT-enabled firmware (needed to boot snowball)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: multi_v7: add HREFv60 to multi_v7 defconfig ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot ARM: sa1100: collie.c: fall back to jedec_probe flash detection ARM: u300: hide submenus ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT ARM: ux500: disable outer cache debug ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property ...
2013-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds127-517/+751
Pull networking fixes from David Miller: 1) If the local_df boolean is set on an SKB we have to allocate a unique ID even if IP_DF is set in the ipv4 headers, from Ansis Atteka. 2) Some fixups for the new chipset support that went into the sfc driver, from Ben Hutchings. 3) Because SCTP bypasses a good chunk of, and actually duplicates, the logic of the ipv6 output path, some IPSEC things don't get done properly. Integrate SCTP better into the ipv6 output path so that these problems are fixed and such issues don't get missed in the future either. From Daniel Borkmann. 4) Fix skge regressions added by the DMA mapping error return checking added in v3.10, from Mikulas Patocka. 5) Kill some more IRQF_DISABLED references, from Michael Opdenacker. 6) Fix races and deadlocks in the bridging code, from Hong Zhiguo. 7) Fix error handling in tun_set_iff(), in particular don't leak resources. From Jason Wang. 8) Prevent format-string injection into xen-netback driver, from Kees Cook. 9) Fix regression added to netpoll ARP packet handling, in particular check for the right ETH_P_ARP protocol code. From Sonic Zhang. 10) Try to deal with AMD IOMMU errors when using r8169 chips, from Francois Romieu. 11) Cure freezes due to recent changes in the rt2x00 wireless driver, from Stanislaw Gruszka. 12) Don't do SPI transfers (which can sleep) in interrupt context in cw1200 driver, from Solomon Peachy. 13) Fix LEDs handling bug in 5720 tg3 chips already handled for 5719. From Nithin Sujir. 14) Make xen_netbk_count_skb_slots() count the actual number of slots that will be used, taking into consideration packing and other issues that the transmit path will run into. From David Vrabel. 15) Use the correct maximum age when calculating the bridge message_age_timer, from Chris Healy. 16) Get rid of memory leaks in mcs7780 IRDA driver, from Alexey Khoroshilov. 17) Netfilter conntrack extensions were converted to RCU but are not always freed properly using kfree_rcu(). Fix from Michal Kubecek. 18) VF reset recovery not being done correctly in qlcnic driver, from Manish Chopra. 19) Fix inverted test in ATM nicstar driver, from Andy Shevchenko. 20) Missing workqueue destroy in cxgb4 error handling, from Wei Yang. 21) Internal switch not initialized properly in bgmac driver, from Rafał Miłecki. 22) Netlink messages report wrong local and remote addresses in IPv6 tunneling, from Ding Zhi. 23) ICMP redirects should not generate socket errors in DCCP and SCTP. We're still working out how this should be handled for RAW and UDP sockets. From Daniel Borkmann and Duan Jiong. 24) We've had several bugs wherein the network namespace's loopback device gets accessed after it is free'd, NULL it out so that we can catch these problems more readily. From Eric W Biederman. 25) Fix regression in TCP RTO calculations, from Neal Cardwell. 26) Fix too early free of xen-netback network device when VIFs still exist. From Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) netconsole: fix a deadlock with rtnl and netconsole's mutex netpoll: fix NULL pointer dereference in netpoll_cleanup skge: fix broken driver ip: generate unique IP identificator if local fragmentation is allowed ip: use ip_hdr() in __ip_make_skb() to retrieve IP header xen-netback: Don't destroy the netdev until the vif is shut down net:dccp: do not report ICMP redirects to user space cnic: Fix crash in cnic_bnx2x_service_kcq() bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions. vxlan: Avoid creating fdb entry with NULL destination tcp: fix RTO calculated from cached RTT drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> instead of <asm/io.h> net loopback: Set loopback_dev to NULL when freed batman-adv: set the TAG flag for the vid passed to BLA netfilter: nfnetlink_queue: use network skb for sequence adjustment net: sctp: rfc4443: do not report ICMP redirects to user space net: usb: cdc_ether: use usb.h macros whenever possible net: usb: cdc_ether: fix checkpatch errors and warnings net: usb: cdc_ether: Use wwan interface for Telit modules ip6_tunnels: raddr and laddr are inverted in nl msg ...
2013-09-19netconsole: fix a deadlock with rtnl and netconsole's mutexNikolay Aleksandrov1-4/+1
This bug was introduced by commit 7a163bfb7ce50895bbe67300ea610d31b9c09230 ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19netpoll: fix NULL pointer dereference in netpoll_cleanupNikolay Aleksandrov1-5/+4
I've been hitting a NULL ptr deref while using netconsole because the np->dev check and the pointer manipulation in netpoll_cleanup are done without rtnl and the following sequence happens when having a netconsole over a vlan and we remove the vlan while disabling the netconsole: CPU 1 CPU2 removes vlan and calls the notifier enters store_enabled(), calls netdev_cleanup which checks np->dev and then waits for rtnl executes the netconsole netdev release notifier making np->dev == NULL and releases rtnl continues to dereference a member of np->dev which at this point is == NULL Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19skge: fix broken driverMikulas Patocka1-2/+3
The patch 136d8f377e1575463b47840bc5f1b22d94bf8f63 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Vasiliy Glazov <vascom2@gmail.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19ip: generate unique IP identificator if local fragmentation is allowedAnsis Atteka9-16/+20
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19ip: use ip_hdr() in __ip_make_skb() to retrieve IP headerAnsis Atteka1-1/+1
skb->data already points to IP header, but for the sake of consistency we can also use ip_hdr() to retrieve it. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19xen-netback: Don't destroy the netdev until the vif is shut downPaul Durrant3-21/+23
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds40-87/+404
Pull MIPS updates from Ralf Baechle: - Minor updates and fixes to the Octeon ethernet driver in staging - A fix to VGA_MAP_MEM() for 64 bit platforms - Fix a workaround for 74K/1074K processors - The symlink arch/mips/boot/dts/include/dt-bindings was pointing to a a file with a name ending in \n. I think this may have been caused by a git bug with with patches sent by email - A build fix for VGA console on BCM1480-based systems - Fix PCI device access via "/sys/bus/pci/.../resource0" or similar work for Alchemy platforms - Fix potential data leak on MIPS R5 cores. This doesn't add proper support for any R5 features, just ensures a kernel without such support will be secure to run - Adding a macros for the CP0 Config5 register to be used by the R5 fix - Make get_cycles() actually return something useful where possible This also requires a preparatory patch for performance sake - Fix a warning about the use of smp_processor_id() in preemptible code. Again this includes a preparatory patch adding the infrastructure to be used by the actual patch - Finally remove pointless one-line comment * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix invalid symbolic link file MIPS: PCI: pci-bcm1480: Include missing vt.h header MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs. MIPS: Add MIPS R5 config5 register. MIPS: PCI: Use pci_resource_to_user to map pci memory space properly MIPS: 74K/1074K: Correct erratum workaround. MIPS: Cleanup CP0 PRId and CP1 FPIR register access masks MIPS: Remove useless comment about kprobe from arch/mips/Makefile MIPS: Fix VGA_MAP_MEM macro. MIPS: Reimplement get_cycles(). MIPS: Optimize current_cpu_type() for better code. MIPS: Fix accessing to per-cpu data when flushing the cache MIPS: Provide nice way to access boot CPU's data. staging: octeon-ethernet: rgmii: enable interrupts that we can handle staging: octeon-ethernet: remove skb alloc failure warnings staging: octeon-ethernet: make dropped packets to consume NAPI budget
2013-09-19Merge branch 'for-linus' of ↵Linus Torvalds4-19/+74
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph fixes from Sage Weil: "These fix several bugs with RBD from 3.11 that didn't get tested in time for the merge window: some error handling, a use-after-free, and a sequencing issue when unmapping and image races with a notify operation. There is also a patch fixing a problem with the new ceph + fscache code that just went in" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: fscache: check consistency does not decrement refcount rbd: fix error handling from rbd_snap_name() rbd: ignore unmapped snapshots that no longer exist rbd: fix use-after free of rbd_dev->disk rbd: make rbd_obj_notify_ack() synchronous rbd: complete notifies before cleaning up osd_client and rbd_dev libceph: add function to ensure notifies are complete
2013-09-19MIPS: Fix invalid symbolic link fileMadhavan Srinivasan1-1/+1
Commit 3b29aa5ba204c [MIPS: add <dt-bindings/> symlink] created a symlink file in include/dt-bindings. Even though commit diff is fine, the symlink is invalid and ls -lb shows a newline character at the end of the filename: lrwxrwxrwx 1 maddy maddy 35 Sep 19 18:11 dt-bindings -> ../../../../../include/dt-bindings\n Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: steven.hill@imgtec.com Cc: mmarek@suse.cz Cc: swarren@nvidia.com Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5859/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-19MIPS: PCI: pci-bcm1480: Include missing vt.h headerMarkos Chandras1-0/+1
It's needed for the MAX_NR_CONSOLES macro. Fixes the following build problem on a randconfig: arch/mips/pci/pci-bcm1480.c: In function 'bcm1480_pcibios_init': arch/mips/pci/pci-bcm1480.c:261:36: error: 'MAX_NR_CONSOLES' undeclared (first use in this function) arch/mips/pci/pci-bcm1480.c:261:36: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/mips/pci/pci-bcm1480.o] Error 1 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5858/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-19MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs.Ralf Baechle1-0/+13
Currently the kernel will always use the FR=0 register model for O32. If an O32 application did enable FR=1 mode, some data from another application might be leaked in the extra registers becoming visible. Iow, this patch is meant to make the kernel MIPS R5 tolerant but leaves proper MIPS R5 support to a future patchset. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-19MIPS: Add MIPS R5 config5 register.Ralf Baechle1-0/+7
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds55-259/+835
Pull drm radeon/nouveau/core fixes from Dave Airlie: "Mostly radeon fixes, with some nouveau bios parser, ttm fix and a fix for AST driver" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits) drm/fb-helper: don't sleep for screen unblank when an oops is in progress drm, ttm Fix uninitialized warning drm/ttm: fix the tt_populated check in ttm_tt_destroy() drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa drm/radeon: avoid UVD corruptions on AGP cards drm/radeon: fix panel scaling with eDP and LVDS bridges drm/radeon/dpm: rework auto performance level enable drm/radeon: Fix hmdi typo drm/radeon/dpm/rs780: fix force_performance state for same sclks drm/radeon/dpm/rs780: don't enable sclk scaling if not required drm/radeon/dpm/rs780: add some sanity checking to sclk scaling drm/radeon/dpm/rs780: use drm_mode_vrefresh() drm/udl: rip out set_need_resched drm/ast: fix the ast open key function drm/radeon/dpm: add bapm callback for kb/kv drm/radeon/dpm: add bapm callback for trinity drm/radeon/dpm: add infrastructure to properly handle bapm ...
2013-09-19drm/fb-helper: don't sleep for screen unblank when an oops is in progressDaniel Vetter1-0/+8
Otherwise the system will burn even brighter and worse, leave the user wondering what's going on exactly. Since we already have a panic handler which will (try) to restore the entire fbdev console mode, we can just bail out. Inspired by a patch from Konstantin Khlebnikov. The callchain leading to this, cut&pasted from Konstantin's original patch: callstack: panic() bust_spinlocks(1) unblank_screen() vc->vc_sw->con_blank() fbcon_blank() fb_blank() info->fbops->fb_blank() drm_fb_helper_blank() drm_fb_helper_dpms() drm_modeset_lock_all() mutex_lock(&dev->mode_config.mutex) Note that the entire locking in the fb helper around panic/sysrq and kdbg is ... non-existant. So we have a decent change of blowing up everything. But since reworking this ties in with funny concepts like the fbdev notifier chain or the impressive things which happen around console_lock while oopsing, I'll leave that as an exercise for braver souls than me. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19drm, ttm Fix uninitialized warningPrarit Bhargava1-1/+1
Fix uninitialized warning. drivers/gpu/drm/ttm/ttm_object.c: In function ‘ttm_base_object_lookup’: drivers/gpu/drm/ttm/ttm_object.c:213:10: error: ‘base’ may be used uninitialized in this function [-Werror=maybe-uninitialized] kref_put(&base->refcount, ttm_release_base); ^ drivers/gpu/drm/ttm/ttm_object.c:221:26: note: ‘base’ was declared here struct ttm_base_object *base; Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19drm/ttm: fix the tt_populated check in ttm_tt_destroy()Ben Skeggs1-1/+1
After a vmalloc failure in ttm_dma_tt_alloc_page_directory(), ttm_dma_tt_init() will call ttm_tt_destroy() to cleanup, and end up inside the driver's unpopulate() hook when populate() has never yet been called. On nouveau, the first issue to be hit because of this is that dma_address[] may be a NULL pointer. After working around this, ttm_pool_unpopulate() may potentially hit the same issue with the pages[] array. It seems to make more sense to avoid calling unpopulate on already unpopulated TTMs than to add checks to all the implementations. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-19Merge branch 'drm-nouveau-next' of ↵Dave Airlie4-27/+36
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A couple of bios parser fixes (one for ancient chips, another for new ones - important in Optimus configs). Another to make sure KMS is enabled on certain Optimus configs, and a TTM failure path fix. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/ttm: prevent double-free in nouveau_sgdma_create_ttm() failure path drm/nouveau/bios/init: fix thinko in INIT_CONFIGURE_MEM drm/nouveau/kms: enable for non-vga pci classes drm/nouveau/bios/init: stub opcode 0xaa
2013-09-19Merge branch 'for-linus' of ↵Linus Torvalds9-43/+62
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "atomic_open-related fixes (Miklos' series, with EEXIST-related parts replaced with fix in fs/namei.c:atomic_open() instead of messing with the instances) + race fix in autofs + leak on failure exit in 9p" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: don't forget to destroy inode cache if fscache registration fails atomic_open: take care of EEXIST in no-open case with O_CREAT|O_EXCL in fs/namei.c vfs: don't set FILE_CREATED before calling ->atomic_open() nfs: set FILE_CREATED gfs2: set FILE_CREATED cifs: fix filp leak in cifs_atomic_open() vfs: improve i_op->atomic_open() documentation autofs4: close the races around autofs4_notify_daemon()
2013-09-19MIPS: PCI: Use pci_resource_to_user to map pci memory space properlyWolfgang Grandegger1-0/+12
[ralf@linux-mips.org: This only matters to Alchemy platforms. On other platforms fixup_bigphys_addr is just an identidy mapping.] Signed-off-by: Wolfgang Grandegger <wg@denx.de> Cc: tiejun.chen <tiejun.chen@windriver.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-19Merge tag 'omap-for-v3.12/fixes-dt-signed' of ↵Olof Johansson9-261/+383
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, OMAP DT fixes for 3.12-rc1: OMAP device tree changes that are needed to fix regressions and avoid electrical issues on beaglebone black. Via Benoit Cousson <bcousson@baylibre.com>: Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset * tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-19Merge tag 'omap-for-v3.12/fixes-signed' of ↵Olof Johansson7-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, fixes for 3.12-rc1: OMAP fixes for build warnings and cpuidle, and a few trivial typo fixes. * tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18Merge tag 'for_3.12-rc2/dts_signed' of ↵Tony Lindgren9-261/+383
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.12/fixes-dt Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset
2013-09-18ARM: multi_v7: add HREFv60 to multi_v7 defconfigLinus Walleij1-0/+1
This is just a standard board for the Ux500, include it in the v7 multiplatform defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-18ARM: OMAP2+: mux: fix trivial typo in namePhil Carmody1-1/+1
Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4 SMP: Corrected a typo fucntions to functionsAnoop Thomas Mathew1-1/+1
Corrected the functions spelling mistake in the OMAP4 SMP source file. Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionallyVladimir Murzin1-1/+1
We call cpu_cluster_pm_enter for dev->cpu == 0 only, but cpu_cluster_pm_exit called without that check. Because of that unhandled page fault may happen: [ 3.803405] Unable to handle kernel paging request at virtual address 00002500 [ 3.810974] pgd = c0004000 [ 3.813812] [00002500] *pgd=00000000 [ 3.817596] Internal error: Oops: 5 [#1] SMP ARM [ 3.822418] Modules linked in: [ 3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21 [ 3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000 [ 3.838073] PC is at irq_notifier+0x234/0x25c [ 3.842651] LR is at irq_notifier+0x218/0x25c [ 3.847229] pc : [<c0029ed8>] lr : [<c0029ebc>] psr: 80000193 [ 3.847229] sp : ed897ee8 ip : 00000005 fp : 00000001 [ 3.859283] r10: c0b395f0 r9 : c0b30594 r8 : c0b8c2ac [ 3.864776] r7 : ffffffff r6 : 00000000 r5 : 00000005 r4 : 00000000 [ 3.871643] r3 : 00002500 r2 : 00000000 r1 : 00000005 r0 : 44302244 [ 3.878479] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.886260] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240) [ 3.898590] Stack: (0xed897ee8 to 0xed898000) [ 3.903167] 7ee0: c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000 [ 3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c [ 3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10 [ 3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548 [ 3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380 [ 3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0 [ 3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015 [ 3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528 [ 3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9 [ 3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68) [ 3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38) [ 3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) [ 4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) [ 4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) [ 4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) [ 4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) [ 4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38) [ 4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4) [ 4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4) [ 4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000) [ 4.086791] ---[ end trace d83954a84a6fa69e ]--- It is supposed that sar_base is initialized in irq_save_context, which is called on CPU_CLUSTER_PM_ENTER notification. If this notification has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL. Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition. Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-05 10:41:23 +0300