| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: misc changes to bindings for sa8775p, QDU1000/QRU1000, IPQ5332,
SDX55, msm8976, glink-rpm-edge
- sti: convert to DT schema
- zynq: switch to flexible array to simplify code
* tag 'mailbox-v6.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for QDU1000/QRU1000
mailbox: qcom-apcs-ipc: add IPQ5332 APSS clock support
dt-bindings: mailbox: qcom: add compatible for the IPQ5332 SoC
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
mailbox: qcom-apcs-ipc: enable APCS clock device for MSM8996
dt-bindings: mailbox: qcom: add #clock-cells to msm8996 example
dt-bindings: mailbox: qcom: add missing platforms to conditional clauses
dt-bindings: mailbox: qcom: correct the list of platforms using clocks
dt-bindings: mailbox: qcom: enable syscon compatible for msm8976
dt-bindings: mailbox: qcom: add SDX55 compatible
dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
dt-bindings: mailbox: sti-mailbox: convert to DT schema
mailbox: zynq: Switch to flexible array to simplify code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- parsers: ofpart: add workaround for #size-cells 0
- dt-bindings: partitions: Fix partition node name pattern
- dataflash: remove duplicate SPI ID table
Raw NAND core changes:
- Check the data only read pattern only once
- Prepare the late addition of supported operation checks
- Support for sequential cache reads
- Fix nand_chip kdoc
Raw NAND driver changes:
- Fsl_elbc: Propagate HW ECC settings to HW
- Marvell: Add missing layouts
- Pasemi: Don't use static data to track per-device state
- Sunxi:
- Fix the size of the last OOB region
- Remove an unnecessary check
- Remove an unnecessary check
- Clean up chips after failed init
- Precompute the ECC_CTL register value
- Embed sunxi_nand_hw_ecc by value
- Update OOB layout to match hardware
- tmio_nand: Remove driver
- vf610_nfc: Use regular comments for functions
SPI-NAND driver changes:
- Add support for AllianceMemory AS5F34G04SND
- Macronix: use scratch buffer for DMA operation
NAND ECC changes:
- Mediatek:
- Add ECC support fot MT7986 IC
- Add compatible for MT7986
- dt-bindings: Split ECC engine with rawnand controller
SPI NOR changes:
- Misc core fixes
SPI NOR driver changes:
- Spansion: Minor fixes"
* tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits)
mtd: parsers: ofpart: add workaround for #size-cells 0
mtd: rawnand: sunxi: Precompute the ECC_CTL register value
mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value
mtd: rawnand: sunxi: Update OOB layout to match hardware
mtd: spi-nor: Sort headers alphabetically
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC
dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986
dt-bindings: mtd: Split ECC engine with rawnand controller
mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW
mtd: spinand: Add support for AllianceMemory AS5F34G04SND
dt-bindings: mtd: partitions: Fix partition node name pattern
mtd: spi-nor: Create macros to define chip IDs and geometries
mtd: spi-nor: spansion: Make CFRx reg fields generic
mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
mtd: spi-nor: core: fix implicit declaration warning
mtd: spinand: macronix: use scratch buffer for DMA operation
mtd: rawnand: Fix nand_chip kdoc
mtd: rawnand: vf610_nfc: use regular comments for functions
mtd: rawnand: Support for sequential cache reads
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a set of tweaks to iqs269a touch controller driver
- a fix for ads7846 driver to properly handle 7845 chip
- cap11xx driver will support cap1203, cap1293 and cap1298 models
- xpad driver will support 8BitDo Pro 2 Wired Controller
- input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
pm_sleep_ptr()
- other miscellaneous fixes and tweaks
* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
dt-bindings: input: iqs626a: Redefine trackpad property types
Input: iqs626a - drop unused device node references
dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
Input: cyttsp5 - fix bitmask for touch buttons
Input: exc3000 - properly stop timer on shutdown
Input: synaptics-rmi4 - fix SPI device ID
Input: cap11xx - add support for cap1203, cap1293 and cap1298
dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
Input: edt-ft5x06 - fix typo in a comment
Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
Input: apbps2 - use devm_platform_get_and_ioremap_resource()
Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
Input: ads7846 - don't check penirq immediately for 7845
Input: ads7846 - always set last command to PWRDOWN
Input: ads7846 - don't report pressure for ads7845
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes cleanup updates from Masami Hiramatsu:
"These are probe events cleanups, no new features but improve
readability:
- Rename print_probe_args() to trace_probe_print_args() and
un-inline it
- Introduce a set of default data fetch functions for dynamic
probe events
- Extract common code of data fetch process of dynamic probe events"
* tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kernel/trace: extract common part in process_fetch_insn
kernel/trace: Provide default impelentations defined in trace_probe_tmpl.h
kernel/trace: Introduce trace_probe_print_args and use it in *probes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kernel concurrency sanitizer (KCSAN) updates from Paul McKenney:
"This fixes gcc-11 errors for x86_64 KCSAN-enabled kernel builds by
selecting the CONSTRUCTORS Kconfig option"
* tag 'kcsan.2023.02.24a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: select CONFIG_CONSTRUCTORS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array updates from Gustavo Silva:
"Transform zero-length arrays, in unions, into flexible arrays"
* tag 'flex-array-transformations-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
bcache: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
mm/memremap: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
exportfs: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha updates from Al Viro:
"Mostly small janitorial fixes but there's also more important ones: a
patch to fix loading large modules from Edward Humes, and some fixes
from Al Viro"
[ The fixes from Al mostly came in separately through Al's trees too and
are now duplicated.. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: in_irq() cleanup
alpha: lazy FPU switching
alpha/boot/misc: trim unused declarations
alpha/boot/tools/objstrip: fix the check for ELF header
alpha/boot: fix the breakage from -isystem series...
alpha: fix FEN fault handling
alpha: Avoid comma separated statements
alpha: fixed a typo in core_cia.c
alpha: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions
alpha: update config files
alpha: fix R_ALPHA_LITERAL reloc for large modules
alpha: Add some spaces to ensure format specification
alpha: replace NR_SYSCALLS by NR_syscalls
alpha: Remove redundant local asm header redirections
alpha: Implement "current_stack_pointer"
alpha: remove redundant err variable
alpha: osf_sys: reduce kernel log spamming on invalid osf_mount call typenr
|
|
Pull VFIO updates from Alex Williamson:
- Remove redundant resource check in vfio-platform (Angus Chen)
- Use GFP_KERNEL_ACCOUNT for persistent userspace allocations, allowing
removal of arbitrary kernel limits in favor of cgroup control (Yishai
Hadas)
- mdev tidy-ups, including removing the module-only build restriction
for sample drivers, Kconfig changes to select mdev support,
documentation movement to keep sample driver usage instructions with
sample drivers rather than with API docs, remove references to
out-of-tree drivers in docs (Christoph Hellwig)
- Fix collateral breakages from mdev Kconfig changes (Arnd Bergmann)
- Make mlx5 migration support match device support, improve source and
target flows to improve pre-copy support and reduce downtime (Yishai
Hadas)
- Convert additional mdev sysfs case to use sysfs_emit() (Bo Liu)
- Resolve copy-paste error in mdev mbochs sample driver Kconfig (Ye
Xingchen)
- Avoid propagating missing reset error in vfio-platform if reset
requirement is relaxed by module option (Tomasz Duszynski)
- Range size fixes in mlx5 variant driver for missed last byte and
stricter range calculation (Yishai Hadas)
- Fixes to suspended vaddr support and locked_vm accounting, excluding
mdev configurations from the former due to potential to indefinitely
block kernel threads, fix underflow and restore locked_vm on new mm
(Steve Sistare)
- Update outdated vfio documentation due to new IOMMUFD interfaces in
recent kernels (Yi Liu)
- Resolve deadlock between group_lock and kvm_lock, finally (Matthew
Rosato)
- Fix NULL pointer in group initialization error path with IOMMUFD (Yan
Zhao)
* tag 'vfio-v6.3-rc1' of https://github.com/awilliam/linux-vfio: (32 commits)
vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
docs: vfio: Update vfio.rst per latest interfaces
vfio: Update the kdoc for vfio_device_ops
vfio/mlx5: Fix range size calculation upon tracker creation
vfio: no need to pass kvm pointer during device open
vfio: fix deadlock between group lock and kvm lock
vfio: revert "iommu driver notify callback"
vfio/type1: revert "implement notify callback"
vfio/type1: revert "block on invalid vaddr"
vfio/type1: restore locked_vm
vfio/type1: track locked_vm per dma
vfio/type1: prevent underflow of locked_vm via exec()
vfio/type1: exclude mdevs from VFIO_UPDATE_VADDR
vfio: platform: ignore missing reset if disabled at module init
vfio/mlx5: Improve the target side flow to reduce downtime
vfio/mlx5: Improve the source side flow upon pre_copy
vfio/mlx5: Check whether VF is migratable
samples: fix the prompt about SAMPLE_VFIO_MDEV_MBOCHS
vfio/mdev: Use sysfs_emit() to instead of sprintf()
vfio-mdev: add back CONFIG_VFIO dependency
...
|
|
Pull virtio updates from Michael Tsirkin:
- device feature provisioning in ifcvf, mlx5
- new SolidNET driver
- support for zoned block device in virtio blk
- numa support in virtio pmem
- VIRTIO_F_RING_RESET support in vhost-net
- more debugfs entries in mlx5
- resume support in vdpa
- completion batching in virtio blk
- cleanup of dma api use in vdpa
- now simulating more features in vdpa-sim
- documentation, features, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa/mlx5: support device features provisioning
vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
vdpa: validate device feature provisioning against supported class
vdpa: validate provisioned device features against specified attribute
vdpa: conditionally read STATUS in config space
vdpa: fix improper error message when adding vdpa dev
vdpa/mlx5: Initialize CVQ iotlb spinlock
vdpa/mlx5: Don't clear mr struct on destroy MR
vdpa/mlx5: Directly assign memory key
tools/virtio: enable to build with retpoline
vringh: fix a typo in comments for vringh_kiov
vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
scsi: virtio_scsi: fix handling of kmalloc failure
vdpa: Fix a couple of spelling mistakes in some messages
vhost-net: support VIRTIO_F_RING_RESET
vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
vdpa: mlx5: support per virtqueue dma device
vdpa: set dma mask for vDPA device
virtio-vdpa: support per vq dma device
vdpa: introduce get_vq_dma_device()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vpe-mt: drop physical_memsize
mips: fix syscall_get_nr
MIPS: SMP-CPS: fix build error when HOTPLUG_CPU not set
MIPS: DTS: jz4780: add #clock-cells to rtc_dev
MIPS: dts: Boston: Fix dtc 'pci_device_reg' warning
mips: dts: ralink: mt7621: add port@5 as CPU port
mips: dts: align LED node names with dtschema
MIPS: ralink: Use devm_platform_get_and_ioremap_resource()
MIPS: pci-mt7620: Use devm_platform_get_and_ioremap_resource()
MIPS: pci: lantiq: Use devm_platform_get_and_ioremap_resource()
MIPS: lantiq: xway: Use devm_platform_get_and_ioremap_resource()
MIPS: BCM47XX: Add support for Linksys E2500 V3
mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help section
MIPS: DTS: CI20: fix otg power gpio
MIPS: dts: lantiq: Remove bogus interrupt-parent; line
MIPS: Fix a compilation issue
MIPS: remove CONFIG_MIPS_LD_CAN_LINK_VDSO
mips: Realtek RTL: select NO_EXCEPT_FILL
MIPS: OCTEON: octeon-usb: Consolidate error messages
|
|
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel Trust Domain Extensions (TDX) updates from Dave Hansen:
"Other than a minor fixup, the content here is to ensure that TDX
guests never see virtualization exceptions (#VE's) that might be
induced by the untrusted VMM.
This is a highly desirable property. Without it, #VE exception
handling would fall somewhere between NMIs, machine checks and total
insanity. With it, #VE handling remains pretty mundane.
Summary:
- Fixup comment typo
- Prevent unexpected #VE's from:
- Hosts removing perfectly good guest mappings (SEPT_VE_DISABLE)
- Excessive #VE notifications (NOTIFY_ENABLES) which are delivered
via a #VE"
* tag 'x86_tdx_for_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()
x86/tdx: Disable NOTIFY_ENABLES
x86/tdx: Relax SEPT_VE_DISABLE check for debug TD
x86/tdx: Use ReportFatalError to report missing SEPT_VE_DISABLE
x86/tdx: Expand __tdx_hypercall() to handle more arguments
x86/tdx: Refactor __tdx_hypercall() to allow pass down more arguments
x86/tdx: Add more registers to struct tdx_hypercall_args
x86/tdx: Fix typo in comment in __tdx_hypercall()
|
|
Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
On each context switch we save the FPU registers on stack
of old process and restore FPU registers from the stack of new one.
That allows us to avoid doing that each time we enter/leave the
kernel mode; however, that can get suboptimal in some cases.
For one thing, we don't need to bother saving anything
for kernel threads. For another, if between entering and leaving
the kernel a thread gives CPU up more than once, it will do
useless work, saving the same values every time, only to discard
the saved copy as soon as it returns from switch_to().
Alternative solution:
* move the array we save into from switch_stack to thread_info
* have a (thread-synchronous) flag set when we save them
* have another flag set when they should be restored on return to userland.
* do *NOT* save/restore them in do_switch_stack()/undo_switch_stack().
* restore on the exit to user mode if the restore flag had
been set. Clear both flags.
* on context switch, entry to fork/clone/vfork, before entry into do_signal()
and on entry into straced syscall save the registers and set the 'saved' flag
unless it had been already set.
* on context switch set the 'restore' flag as well.
* have copy_thread() set both flags for child, so the registers would be
restored once the child returns to userland.
* use the saved data in setup_sigcontext(); have restore_sigcontext() set both flags
and copy from sigframe to save area.
* teach ptrace to look for FPU registers in thread_info instead of
switch_stack.
* teach isolated accesses to FPU registers (rdfpcr, wrfpcr, etc.)
to check the 'saved' flag (under preempt_disable()) and work with the save area
if it's been set; if 'saved' flag is found upon write access, set 'restore' flag
as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
gzip_mark() and gzip_release() are gone; there used to be two
forward declarations of each and the patch removing those suckers
had left one of each behind...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Just memcmp() with ELFMAG - that's the normal way to do it in userland
code, which that thing is. Besides, that has the benefit of actually
building - str_has_prefix() is *NOT* present in <string.h>.
Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning. Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:
.global _start
_start:
call_pal 0xae
lda $0, 0
ldq $0, 0($0)
- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).
Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.
Incidentally, check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs). The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3. PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-code variant here is actually equivalent
to !user_mode(regs). Harder to follow, though...
Reproducer above will crash any box where CLRFEN is not ignored by
PAL (== any actual hardware, AFAICS; PAL used in qemu doesn't
bother implementing that crap).
Cc: stable@vger.kernel.org # all way back...
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff that didn't fit anywhere else"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nsfs: repair kernel-doc for ns_match()
nsfs: add compat ioctl handler
fs/cramfs: Convert kmap() to kmap_local_data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ipc namespace update from Al Viro:
"Rik's patches reducing the amount of synchronize_rcu() triggered by
ipc namespace destruction.
I've some pending stuff reducing that on the normal umount side, but
it's nowhere near ready and Rik's stuff shouldn't be held back due to
conflicts - I'll just redo the parts of my series that stray into
ipc/*"
* 'work.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ipc,namespace: batch free ipc_namespace structures
ipc,namespace: make ipc namespace allocation wait for pending free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull alpha updates from Al Viro:
"FEN (floating-point enable) fault fix deals with a really old oopsable
braino, the rest is alpha/boot compile fixes and minor cleaning up"
* 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha/boot/misc: trim unused declarations
alpha/boot/tools/objstrip: fix the check for ELF header
alpha/boot: fix the breakage from -isystem series...
alpha: fix FEN fault handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysv updates from Al Viro:
"Fabio's 'switch to kmap_local_page()' patchset (originally after the
ext2 counterpart, with a lot of cleaning up done to it; as the matter
of fact, ext2 side is in need of similar cleanups - calling
conventions there are bloody awful).
Plus the equivalents of minix stuff..."
* 'work.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
sysv: fix handling of delete_entry and set_link failures
fs/sysv: Replace kmap() with kmap_local_page()
fs/sysv: Use dir_put_page() in sysv_rename()
fs/sysv: Change the signature of dir_get_page()
fs/sysv: Use the offset_in_page() helper
sysv: don't flush page immediately for DIRSYNC directories
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull minix updates from Al Viro:
"Assorted fixes - mostly Christoph's"
* 'work.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
minix_rename(): minix_delete_entry() might fail
minix: don't flush page immediately for DIRSYNC directories
minix: fix error handling in minix_set_link
minix: fix error handling in minix_delete_entry
minix: move releasing pages into unlink and rename
minix: make minix_new_inode() return error as ERR_PTR(-E...)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"This is a small update which features a bit of core changes and driver
updates in Intel and cadence driver.
Core:
- sdw_transfer_defer() API change to drop an argument
- Reset page address rework
- Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs
Drivers:
- Cadence and related intel driver updates for FIFO handling and low
level msg transfers"
* tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: further simplify low-level xfer_msg_defer() callback
soundwire: cadence: use directly bus sdw_defer structure
soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()
soundwire: stream: use consistent pattern for freeing buffers
soundwire: bus: Remove unused reset_page_addr() callback
soundwire: bus: Don't zero page registers after every transaction
soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()
soundwire: stream: Move remaining register accesses over to no_pm
soundwire: debugfs: Switch to sdw_read_no_pm
soundwire: Provide build stubs for common functions
soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
soundwire: cadence: remove unused sdw_cdns_master_ops declaration
soundwire: enable optional clock registers for SoundWire 1.2 devices
ASoC/soundwire: remove is_sdca boolean property
soundwire: cadence: Drain the RX FIFO after an IO timeout
soundwire: cadence: Remove wasted space in response_buf
soundwire: cadence: Don't overflow the command FIFOs
soundwire: intel: remove DAI startup/shutdown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This features a bunch of new device support, a couple of new drivers,
yaml conversion and updates of a few drivers.
Core support:
- New devm_of_phy_optional_get() API with users and conversion
New hardware support:
- Mediatek MT7986 phy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding"
* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
phy: qcom: Add QCOM SNPS eUSB2 repeater driver
dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
phy: rockchip-typec: Fix unsigned comparison with less than zero
phy: rockchip-typec: fix tcphy_get_mode error case
phy: qcom: snps-eusb2: Add missing headers
phy: qcom-qmp-combo: Add support for SM8550
phy: qcom-qmp: Add v6 DP register offsets
phy: qcom-qmp: pcs-usb: Add v6 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
phy: qcom: Add QCOM SNPS eUSB2 driver
dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6 register offsets
phy: qcom-qmp: pcs: Add v6.20 register offsets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A new driver, couple of device support and binding conversion along
with bunch of driver updates are the main features of this.
New hardware support:
- TI AM62Ax controller support
- Xilinx xdma driver
- Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller
Updates:
- Runtime pm support for at_xdmac driver
- IMX sdma binding conversion to yaml and HDMI audio support
- IMX mxs binding conversion to yaml"
* tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dmaengine: idma64: Update bytes_transferred field
dmaengine: imx-sdma: Set DMA channel to be private
dmaengine: dw: Move check for paused channel to dwc_get_residue()
dmaengine: ptdma: check for null desc before calling pt_cmd_callback
dmaengine: dw-axi-dmac: Do not dereference NULL structure
dmaengine: idxd: Fix default allowed read buffers value in group
dmaengine: sf-pdma: pdma_desc memory leak fix
dmaengine: Simplify dmaenginem_async_device_register() function
dmaengine: use sysfs_emit() to instead of scnprintf()
dmaengine: Make an order in struct dma_device definition
dt-bindings: dma: cleanup examples - indentation, lowercase hex
dt-bindings: dma: drop unneeded quotes
dmaengine: xilinx: xdma: Add user logic interrupt support
dmaengine: xilinx: xdma: Add xilinx xdma driver
dmaengine: drivers: Use devm_platform_ioremap_resource()
dmaengine: at_xdmac: remove empty line
dmaengine: at_xdmac: add runtime pm support
dmaengine: at_xdmac: align properly function members
dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs
dmaengine: sun6i: Set the maximum segment size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new drivers for HPE GXP and Loongson 2K/LS7A
- bigger refactorings for i801 and xiic
- gpio driver gained ACPI and SDA-write only support
- the core converted some OF helpers to fwnode helpers
- usual bunch of driver updates
* tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
MAINTAINERS: Add HPE GXP I2C Support
i2c: Add GXP SoC I2C Controller
dt-bindings: i2c: Add hpe,gxp-i2c
i2c: xiic: Remove some dead code
i2c: xiic: Add SCL frequency configuration support
i2c: xiic: Update compatible with new IP version
dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
i2c: i801: Call i801_check_post() from i801_access()
i2c: i801: Call i801_check_pre() from i801_access()
i2c: i801: Centralize configuring block commands in i801_block_transaction
i2c: i801: Centralize configuring non-block commands in i801_simple_transaction
i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only
i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction()
Documentation: i2c: correct spelling
dt-bindings: i2c: i2c-st: convert to DT schema
i2c: i801: add helper i801_set_hstadd()
i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
i2c: i801: improve interrupt handler
i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Nothing special for the power-supply subystem this time.
- power-supply core: remove faulty cooling logic
- convert all sysfs show() handlers from *printf() use sysfs_emit()
- bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro
- bq27xxx: fix reporting critical level
- syscon-reboot: add priority property support
- new rt9467 charger driver
- new rt9471 charger driver
- new Odroid Go Ultra poweroff driver
- misc minor fixes and cleanups"
* tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: reset: odroid-go-ultra: fix I2C dependency
power: supply: leds: explicitly include linux/leds.h
dt-bindings: power: supply: pm8941-coincell: Don't require charging properties
dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible
power: reset: add Odroid Go Ultra poweroff driver
power: supply: rt9467: Fix spelling mistake "attache" -> "attach"
power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe()
power: supply: max77650: Make max77650_charger_disable() return void
Documentation: power: rt9467: Document exported sysfs entries
power: supply: rt9467: Add Richtek RT9467 charger driver
dt-bindings: power: supply: Add Richtek RT9467 battery charger
Documentation: power: rt9471: Document exported sysfs entries
power: supply: rt9471: Add Richtek RT9471 charger driver
dt-bindings: power: supply: Add Richtek RT9471 battery charger
power: supply: max1721x: Use strscpy() is more robust and safer
power: supply: test-power: use strscpy() instead of strncpy()
power: supply: bq27xxx: fix reporting critical level
power: supply: bq256xx: Init ichg/vbat value with chip default value
power: supply: collie_battery: Convert to GPIO descriptors (part 2)
power: supply: remove faulty cooling logic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
|
|
Pull rdma updates from Jason Gunthorpe:
"Quite a small cycle this time, even with the rc8. I suppose everyone
went to sleep over xmas.
- Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
mana
- inline CQE support for hns
- Have mlx5 display device error codes
- Pinned DMABUF support for irdma
- Continued rxe cleanups, particularly converting the MRs to use
xarray
- Improvements to what can be cached in the mlx5 mkey cache"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
IB/mlx5: Extend debug control for CC parameters
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
RDMA/irdma: Add support for dmabuf pin memory regions
RDMA/mlx5: Use query_special_contexts for mkeys
net/mlx5e: Use query_special_contexts for mkeys
net/mlx5: Change define name for 0x100 lkey value
net/mlx5: Expose bits for querying special mkeys
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
RDMA/rxe: Remove rxe_alloc()
RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
Subject: RDMA/rxe: Handle zero length rdma
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
RDMA/mlx5: Use rdma_umem_for_each_dma_block()
RDMA/umem: Remove unused 'work' member from struct ib_umem
RDMA/irdma: Cap MSIX used to online CPUs + 1
RDMA/mlx5: Check reg_create() create for errors
RDMA/restrack: Correct spelling
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "boring" staging driver update for 6.3-rc1.
Nothing major in here at all, it's just lots of tiny code cleanups to
bring some of the staging drivers more in line with the real portion
of the kernel (apis and coding style.) Overall we remove more lines of
code than we add, always a nice result.
The big work was done by Martin Kaiser and Philipp Hortmann, both
tackling some of the older wifi drivers, removing unused code and
structures and a file in one case.
Full details of the changes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits)
staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"
staging: r8188eu: replace hand coded loop with list_for_each_entry
staging: r8188eu: merge _rtw_enqueue_cmd into its caller
most: add maintainer entry
staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK
staging: rtl8192e: Rename DM_RxPathSelTable
staging: rtl8192e: Rename diff_TH and disabledRF
staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low
staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal
staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap..
staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti..
staging: rtl8192e: Rename MacBlkCtrl and remove double definition
staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and ..
staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE
staging: r8188eu: bagg_pkt parameter is not used
staging: r8188eu: simplify rtw_get_ff_hwaddr
staging: r8188eu: simplify xmit_buf flags
staging: r8188eu: xmit_buf's ff_hwaddr is not used
staging: r8188eu: remove unused frametag defines
staging: r8188eu: simplify rtw_alloc_xmitframe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
|
|
Fix the cifs_writepages_region() to just jump over members of the batch
that have been cleaned up rather than counting them as skipped.
Unlike the other "skip_write" cases, this situation happens even for
WB_SYNC_ALL, simply because the page has either been cleaned by somebody
else, or was truncated.
So in this case we're not "skipping" the write, we simply no longer need
any write at all, so it's very different from the other skip_write cases.
And we definitely shouldn't stop writing the rest just because of too
many of these cases (or because we want to be rescheduled).
Fixes: 3822a7c40997 ("Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/lkml/2213409.1677249075@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Each probe has an instance of process_fetch_insn respectively,
but they have something in common.
This patch aims to extract the common part into
process_common_fetch_insn which can be shared by each probe,
and they only need to focus on their special cases.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
|
|
There are 6 function definitions in trace_probe_tmpl.h, they are:
1, fetch_store_strlen
2, fetch_store_string
3, fetch_store_strlen_user
4, fetch_store_string_user
5, probe_mem_read
6, probe_mem_read_user
Every C file which includes trace_probe_tmpl.h has to implement them,
otherwise it gets warnings and errors. However, some of them are identical,
like kprobe and eprobe, as a result, there is a lot redundant code in those
2 files.
This patch would like to provide default behaviors for those functions
which kprobe and eprobe can share by just including trace_probe_kernel.h
with trace_probe_tmpl.h together.
It removes redundant code, increases readability, and more importantly,
makes it easier to introduce a new feature based on trace probe
(it's possible).
Link: https://lore.kernel.org/all/1672382018-18347-1-git-send-email-chensong_2000@189.cn/
Signed-off-by: Song Chen <chensong_2000@189.cn>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
print_probe_args is currently inplemented in trace_probe_tmpl.h and
included by *probes, as a result, each probe has an identical copy.
This patch will move it to trace_probe.c as an new API, each probe
calls it to print their args in trace file.
Link: https://lore.kernel.org/all/1672382000-18304-1-git-send-email-chensong_2000@189.cn/
Signed-off-by: Song Chen <chensong_2000@189.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
