summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-07regulator: fan53880: Add support for COMPILE_TESTChristoph Fritz2-1/+3
This patch adds support for COMPILE_TEST while fixing a warning when no support for device tree is there. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/1c437154873ace65ff738a0ebca511308f1cecc1.camel@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-06Merge series "Add pca9450 driver" from Robin Gong <yibin.gong@nxp.com>:Mark Brown5-0/+1261
Add pca9450 driver for i.mx8mn-evk board. PCA9450A/B/C supported now. Please refer to below link for PCA9450 datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf v2: 1. rebase with the latest code to use linear_ranges helper instead. 2. address Frieder's comments, such as dulipcated buck4 description, debug info added etc. Robin Gong (4): regulator: pca9450: add pca9450 pmic driver dt-bindings: regulator: add pca9450 regulator yaml arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board arm64: configs: add pca9450 pmic driver .../bindings/regulator/nxp,pca9450-regulator.yaml | 190 +++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 96 +++ arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 6 + arch/arm64/configs/defconfig | 1 + drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pca9450-regulator.c | 859 +++++++++++++++++++++ include/linux/regulator/pca9450.h | 219 ++++++ 8 files changed, 1380 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml create mode 100644 drivers/regulator/pca9450-regulator.c create mode 100644 include/linux/regulator/pca9450.h -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-07-06regulator: fan53880: Add missing .owner field in regulator_descAxel Lin1-0/+3
Add missing .owner field in regulator_desc, which is used for refcounting. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200706080944.663750-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-06dt-bindings: regulator: add pca9450 regulator yamlRobin Gong1-0/+190
Add device binding doc for pca9450 pmic driver. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1593793178-9737-3-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-06regulator: pca9450: add pca9450 pmic driverRobin Gong4-0/+1071
Add NXP pca9450 pmic driver. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/1593793178-9737-2-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-03dt-bindings: regulator: Document bindings for fan53880Christoph Fritz1-0/+85
Add device tree binding information for fan53880 regulator driver. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20200702210846.31659-3-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-03regulator: fan53880: Add initial supportChristoph Fritz3-0/+190
This patch adds support for ON Semiconductor FAN53880 regulator. The FAN53880 is an I2C porgrammable power management IC (PMIC) that contains a BUCK (step-down converter), four LDOs (low dropouts) and one BOOST (step-up converter). It is designed for mobile power applications. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20200702210846.31659-2-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02Merge series "regulator: mt6397: Implement of_map_mode regulator_desc ↵Mark Brown3-3/+32
function" from Anand K Mistry <amistry@google.com>: This patchset adds support for being able to change regulator modes for the mt6397 regulator. This is needed to allow the voltage scaling support in the MT8173 SoC to be used on the elm (Acer Chromebook R13) and hana (several Lenovo Chromebooks) devices. Without a of_map_mode implementation, the regulator-allowed-modes devicetree field is skipped, and attempting to change the regulator mode results in an error: [ 1.439165] vpca15: mode operation not allowed Changes in v2: - Introduce constants in dt-bindings - Improve conditional readability Anand K Mistry (4): regulator: mt6397: Move buck modes into header file dt-bindings: regulator: mt6397: Document valid modes regulator: mt6397: Implement of_map_mode arm64: dts: mediatek: Update allowed mt6397 regulator modes for elm boards .../bindings/regulator/mt6397-regulator.txt | 3 +++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 +++- drivers/regulator/mt6397-regulator.c | 17 ++++++++++++++--- .../regulator/mediatek,mt6397-regulator.h | 15 +++++++++++++++ 4 files changed, 35 insertions(+), 4 deletions(-) create mode 100644 include/dt-bindings/regulator/mediatek,mt6397-regulator.h -- 2.27.0.212.ge8ba1cc988-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-07-02Merge series "regulator: da9211: support changing modes" from Anand K Mistry ↵Mark Brown3-6/+44
<amistry@google.com>: This patchset adds support for being able to change regulator modes for the da9211 regulator. This is needed to allow the voltage scaling support in the MT8173 SoC to be used in the elm (Acer Chromebook R13) and hana (several Lenovo Chromebooks) devices. Anand K Mistry (4): regulator: da9211: Move buck modes into header file dt-bindings: regulator: da9211: Document allowed modes regulator: da9211: Implement of_map_mode arm64: dts: mediatek: Update allowed regulator modes for elm boards .../devicetree/bindings/regulator/da9211.txt | 4 +++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++- drivers/regulator/da9211-regulator.c | 30 +++++++++++++++---- .../regulator/dlg,da9211-regulator.h | 16 ++++++++++ 4 files changed, 47 insertions(+), 7 deletions(-) create mode 100644 include/dt-bindings/regulator/dlg,da9211-regulator.h -- 2.27.0.212.ge8ba1cc988-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-07-02Merge series "regulator: add support for SY8827N regulator" from Jisheng ↵Mark Brown4-0/+238
Zhang <Jisheng.Zhang@synaptics.com>: The SY8827N from Silergy Corp is a single output DC/DC converter. The voltage can be controlled via I2C. Jisheng Zhang (2): dt-bindings: regulator: add document bindings for sy8827n regulator: add support for SY8827N regulator .../bindings/regulator/silergy,sy8827n.yaml | 45 +++++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/sy8827n.c | 185 ++++++++++++++++++ 4 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml create mode 100644 drivers/regulator/sy8827n.c -- 2.27.0
2020-07-02regulator: mp886x: use .probe_newJisheng Zhang1-3/+2
Use the new .probe_new for mp886x. It does not use the const struct i2c_device_id * argument, so convert it to utilise the simplified i2c driver registration. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200702100200.1a4c65d1@xhacker.debian Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: fix null pointer check on regmapColin Ian King1-1/+1
The null pointer check on regmap that checks for a dev_get_regmap failure is currently returning -ENOENT if the regmap succeeded. Fix this by adding in the missing ! operator. Fixes: 4fe66d5a62fb ("regulator: Add support for QCOM PMIC VBUS booster") Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Dereference after null check") Link: https://lore.kernel.org/r/20200702115659.38208-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: da9211: Document allowed modesAnand K Mistry1-0/+4
This patch adds a description of how operating modes may be specified. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702131350.2.I6131e251d13f60d8c5347bb4faa9dc2364c87848@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: da9211: Implement of_map_modeAnand K Mistry1-2/+23
Implementing of_map_mode is necessary to be able to specify operating modes in the devicetree using 'regulator-allowed-modes', and to change regulator modes. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702131350.3.I6a0bc18fcdb2fe13e838a31e6d034d0e095368bc@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: da9211: Move buck modes into header fileAnand K Mistry2-4/+17
This will allow device trees to make use of these constants. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702131350.1.I96e67ab7b4568287eb939e8a572cbc03e87f1aa0@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: add document bindings for sy8827nJisheng Zhang1-0/+45
Add device tree binding information for sy8827n regulator driver. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200702171335.59f5e79b@xhacker.debian Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: add support for SY8827N regulatorJisheng Zhang3-0/+193
The SY8827N from Silergy Corp is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200702171438.20edc523@xhacker.debian Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: mt6397: Document valid modesAnand K Mistry1-0/+3
Document valid mode values for BUCK regulators. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702162231.v2.2.I0a814b246cfe47f8dd1e25553ee881cbcfd0d8eb@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: mt6397: Implement of_map_modeAnand K Mistry1-0/+13
Implementing of_map_mode is necessary to be able to specify operating modes in the devicetree using 'regulator-allowed-modes', and to change regulator modes. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702162231.v2.3.I7acfb591bfacf3b1b04a3d388385098bfcc9fecd@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02regulator: mt6397: Move buck modes into header fileAnand K Mistry2-3/+16
This will allow device trees to make use of these constants. Signed-off-by: Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702162231.v2.1.Icf69e2041b1af4548347018186c3ba6310f53e66@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01Merge series "Introduce PMIC based USB type C detection" from Wesley Cheng ↵Mark Brown4-0/+149
<wcheng@codeaurora.org>: Changes in v4: - Modified qcom,pmic-typec binding to include the SS mux and the DRD remote endpoint nodes underneath port@1, which is assigned to the SSUSB path according to usb-connector - Added usb-connector reference to the typec dt-binding - Added tags to the usb type c and vbus nodes - Removed "qcom" tags from type c and vbus nodes - Modified Kconfig module name, and removed module alias from the typec driver Changes in v3: - Fix driver reference to match driver name in Kconfig for qcom_usb_vbus-regulator.c - Utilize regulator bitmap helpers for enable, disable and is enabled calls in qcom_usb_vbus-regulator.c - Use of_get_regulator_init_data() to initialize regulator init data, and to set constraints in qcom_usb_vbus-regulator.c - Remove the need for a local device structure in the vbus regulator driver Changes in v2: - Use devm_kzalloc() in qcom_pmic_typec_probe() - Add checks to make sure return value of typec_find_port_power_role() is valid - Added a VBUS output regulator driver, which will be used by the PMIC USB type c driver to enable/disable the source - Added logic to control vbus source from the PMIC type c driver when UFP/DFP is detected - Added dt-binding for this new regulator driver - Fixed Kconfig typec notation to match others - Leave type C block disabled until enabled by a platform DTS Add the required drivers for implementing type C orientation and role detection using the Qualcomm PMIC. Currently, PMICs such as the PM8150B have an integrated type C block, which can be utilized for this. This series adds the dt-binding, PMIC type C driver, and DTS nodes. The PMIC type C driver will register itself as a type C port w/ a registered type C switch for orientation, and will fetch a USB role switch handle for the role notifications. It will also have the ability to enable the VBUS output to any connected devices based on if the device is behaving as a UFP or DFP. Wesley Cheng (6): usb: typec: Add QCOM PMIC typec detection driver dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding arm64: boot: dts: qcom: pm8150b: Add node for USB type C block regulator: Add support for QCOM PMIC VBUS booster dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output regulator arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster .../regulator/qcom,usb-vbus-regulator.yaml | 41 +++ .../bindings/usb/qcom,pmic-typec.yaml | 113 +++++++ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 13 + arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom_usb_vbus-regulator.c | 97 ++++++ drivers/usb/typec/Kconfig | 12 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++ 10 files changed, 567 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c create mode 100644 drivers/usb/typec/qcom-pmic-typec.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
2020-07-01Merge series "regulator/qcom: Constify static structs" from Rikard Falkeborn ↵Mark Brown2-15/+15
<rikard.falkeborn@gmail.com>: Constify some static structs to allow the compiler to put them in read-only memory. Rikard Falkeborn (2): regulator: qcom_rpm: Constify struct regulator_ops regulator: qcom_spmi: Constify struct regulator_ops drivers/regulator/qcom_rpm-regulator.c | 6 +++--- drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------ 2 files changed, 15 insertions(+), 15 deletions(-) -- 2.27.0
2020-07-01Merge series "Add frequency / voltage scaling support for IPQ6018 SoC" from ↵Mark Brown2-0/+35
Kathiravan T <kathirav@codeaurora.org>: IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same. changes since V1: - Moved YAML conversion to the last as per Mark's comments Kathiravan T (6): dt-bindings: soc: qcom: Add IPQ6018 compatible soc: qcom: smd-rpm: Add IPQ6018 compatible dt-bindings: regulator: add MP5496 regulator compatible regulator: qcom_smd: Add MP5496 regulators dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema .../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ---- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++ drivers/regulator/qcom_smd-regulator.c | 34 +++ drivers/soc/qcom/smd-rpm.c | 1 + 6 files changed, 233 insertions(+), 382 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
2020-07-01regulator: lp87565: enable voltage regardless of ENx pinLuca Ceresoli1-2/+19
This driver enables outputs by setting bit EN_BUCKn in the BUCKn_CTRL1 register. However, if bit EN_PIN_CTRLn in the same register is set, the output is actually enabled only if EN_BUCKn is set AND an enable pin is active. Since the driver does not touch EN_PIN_CTRLn, the choice is left to the hardware, which in turn gets this bit from OTP memory, and in absence of OTP data it uses a default value that is documented in the datasheet for LP8752x, but not for LP8756x. Thus the driver doesn't really "know" whether it is actually enabling the output or not. In order to make sure activation is always driver-controlled, just clear the EN_PIN_CTRLn bit. Now all activation solely depend on the EN_BUCKn bit. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200622204329.11147-2-luca@lucaceresoli.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: add MP5496 regulator compatibleKathiravan T1-0/+1
IPQ6018 uses the PMIC MP5496. Add the binding for the same. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-4-git-send-email-kathirav@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: qcom_smd: Add MP5496 regulatorsKathiravan T1-0/+34
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-5-git-send-email-kathirav@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: qcom_spmi: Constify struct regulator_opsRikard Falkeborn1-12/+12
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 20362 2592 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o After: text data bss dec hex filename 21814 1140 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200629194632.8147-3-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: qcom_rpm: Constify struct regulator_opsRikard Falkeborn1-3/+3
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 17485 500 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o After: text data bss dec hex filename 17881 104 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200629194632.8147-2-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: Add dt-binding for QCOM PMIC VBUS output regulatorWesley Cheng1-0/+41
This describes how to enable the Qualcomm PMIC VBUS booster used for providing power to connected USB peripherals when the USB role is host mode. The driver itself will register the vbus_usb regulator, so that external drivers can utilize the enable/disable regulator APIs. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20200626185516.18018-6-wcheng@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01regulator: Add support for QCOM PMIC VBUS boosterWesley Cheng3-0/+108
Some Qualcomm PMICs have the capability to source the VBUS output to connected peripherals. This driver will register a regulator to the regulator list to enable or disable this source by an external driver. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20200626185516.18018-5-wcheng@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: qcom_smd-regulator: Remove unused 'struct regulator_desc ↵Lee Jones1-9/+0
pmi8994_boost' This was an upstreaming error. Remove it as it's not to be used. Fixes the following W=1 kernel build warning: drivers/regulator/qcom_smd-regulator.c:477:36: warning: ‘pmi8994_boost’ defined but not used [-Wunused-const-variable=] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-10-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: wm8400-regulator: Repair dodgy kerneldoc header formattingLee Jones1-3/+3
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used. This change fixes the following warnings: drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'dev' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'reg' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'initdata' not described in 'wm8400_register_regulator' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Link: https://lore.kernel.org/r/20200626065738.93412-9-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: tps65218-regulator: Remove pointless 'is unsigned int <0' checkLee Jones1-2/+2
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_enable’: drivers/regulator/tps65218-regulator.c:131:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 131 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_disable’: drivers/regulator/tps65218-regulator.c:144:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 144 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Dave Gerlach <d-gerlach@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-8-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: tps65217-regulator: Use the returned value of tps65217_reg_read()Lee Jones1-0/+3
Until now the aforementioned return value has been ignored. Previous and current calls to tps65217_reg_read() return instantly when the value is not 0, so let's do that. Fixes the following W=1 warning: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_regulator_probe’: drivers/regulator/tps65217-regulator.c:227:9: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 227 | int i, ret; | ^~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Russ Dill <Russ.Dill@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-7-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: tps65217-regulator: Remove pointless 'is unsigned int <0' checkLee Jones1-2/+2
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_enable’: drivers/regulator/tps65217-regulator.c:127:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 127 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_disable’: drivers/regulator/tps65217-regulator.c:140:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 140 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Russ Dill <Russ.Dill@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-6-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: stpmic1_regulator: Properly document 'struct stpmic1_regulator_cfg'Lee Jones1-1/+1
In kerneldoc format, data structures have to start with 'struct' else the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 kernel build warning: drivers/regulator/stpmic1_regulator.c:25: warning: cannot understand function prototype: 'struct stpmic1_regulator_cfg ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Pascal Paillet <p.paillet@st.com> Link: https://lore.kernel.org/r/20200626065738.93412-5-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: pwm-regulator: Demote kerneldoc header to standard commentLee Jones1-1/+1
This particular comment doesn't have anything to do with documenting functions or data structures. Instead it is used as a section header. Fixes W=1 warning: drivers/regulator/pwm-regulator.c:55: warning: Function parameter or member 'rdev' not described in 'pwm_regulator_init_state' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200626065738.93412-4-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: qcom-rpmh-regulator: Repair dodgy kerneldoc header formattingLee Jones1-7/+7
W=1 kernel builds report a lack of descriptions for various enum properties and function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used or none at all. This change fixes the following warnings: drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'VRM' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'XOB' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'vreg' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'dev' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'node' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_id' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_rpmh_data' not described in 'rpmh_regulator_init_vreg' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-3-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26regulator: max8998: Staticify internal function max8998_get_current_limit()Lee Jones1-1/+1
max8998_get_current_limit() is only used via the .get_current_limit, so it doesn't need to be publicly supported, or to have its own external prototype. Instead, we'll make it static. Fixes the following W=1 warning: drivers/regulator/max8998.c:418:5: warning: no previous prototype for ‘max8998_get_current_limit’ [-Wmissing-prototypes] 418 | int max8998_get_current_limit(struct regulator_dev *rdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200626065738.93412-2-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: max14577-regulator: Demote kerneldoc header to standard commentLee Jones1-1/+1
Nothing about this comment identifies it as a kerneldoc header. It's missing all of it's function argument descriptions and the correct function header. Fixes the following W=1 warning(s): drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'max14577' not described in 'max14577_get_regma drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'reg_id' not described in 'max14577_get_regmap' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-11-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: cpcap-regulator: Demote kerneldoc header to standard commentLee Jones1-2/+2
Nothing about this comment identifies it as a kerneldoc header. They're missing all of their struct's property descriptions and the correct 'struct *' header. Fixes the following W=1 warning(s): drivers/regulator/cpcap-regulator.c:99: warning: cannot understand function prototype: 'struct cpcap_regulator ' drivers/regulator/cpcap-regulator.c:337: warning: cannot understand function prototype: 'const struct cpcap_regulator omap4_regulators[] = ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-9-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: cpcap-regulator: Remove declared and set, but never used variable ↵Lee Jones1-6/+6
'ignore' It's okay to not check the return value that you're not conserned about, however it is not okay to assign a variable and not check or use the result. Fixes W=1 warnings(s): drivers/regulator/cpcap-regulator.c:172:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 172 | int error, ignore; | ^~~~~~ drivers/regulator/cpcap-regulator.c: In function ‘cpcap_regulator_disable’: drivers/regulator/cpcap-regulator.c:196:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 196 | int error, ignore; | ^~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-8-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: wm8350-regulator: Repair odd formatting in documentationLee Jones1-5/+5
Kerneldoc expects function arguments to be in the format '@.*:'. If this format is not followed the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 warning(s): drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'wm8350' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'lednum' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'dcdc' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'isink' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'pdata' not described in 'wm8350_register_led' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-7-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: ab8500: Remove unused embedded struct expand_registerLee Jones1-6/+1
Used primarily for the AB8540 which lost support in early 2018. It is now deemed safe to remove this legacy data structure. Also fixes W=1 issue: drivers/regulator/ab8500.c:88: warning: Function parameter or member 'expand_register' not described in 'ab8500_regulator_info' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-6-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: dbx500-prcmu: Remove unused function dbx500_regulator_testcase()Lee Jones1-8/+0
There isn't any code present within the current kernel to override this 'weak' function. Besides returning '0', which is never checked anyway, the whole function appears to be superfluous. Consequently fixes W=1 warning: drivers/regulator/dbx500-prcmu.c:113:27: warning: no previous prototype for ‘dbx500_regulator_testcase’ [-Wmissing-prototypes] 113 | int __attribute__((weak)) dbx500_regulator_testcase( | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-5-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-25regulator: consumer: Supply missing prototypes for 3 core functionsLee Jones1-0/+10
regulator_suspend_enable(), regulator_suspend_disable() and regulator_set_suspend_voltage() are all exported members of the API, but are all missing prototypes. Fixes the following W=1 warning(s): drivers/regulator/core.c:3805:5: warning: no previous prototype for ‘regulator_suspend_enable’ [-Wmissing-prototypes] 3805 | int regulator_suspend_enable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3812:5: warning: no previous prototype for ‘regulator_suspend_disable’ [-Wmissing-prototypes] 3812 | int regulator_suspend_disable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3851:5: warning: no previous prototype for ‘regulator_set_suspend_voltage’ [-Wmissing-prototypes] 3851 | int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-2-lee.jones@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23regulator: pfuze100: add condition check for 'ramp_delay = 0'Robin Gong1-3/+6
Checking for 'ramp_delay = 0' to avoid Coverity warning report. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592920870-12693-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-18regulator: max8997: Constify struct regulator_opsRikard Falkeborn1-7/+7
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 13114 8596 0 21710 54ce drivers/regulator/max8997-regulator.o After: text data bss dec hex filename 14038 7672 0 21710 54ce drivers/regulator/max8997-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-6-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-18regulator: max8907: Constify static structsRikard Falkeborn1-3/+3
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 2753 7328 0 10081 2761 drivers/regulator/max8907-regulator.o After: text data bss dec hex filename 9405 684 0 10089 2769 drivers/regulator/max8907-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-5-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-18regulator: ltc3676: Constify ltc3676_regulatorsRikard Falkeborn1-1/+1
ltc3676_regulators is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4361 2064 8 6433 1921 drivers/regulator/ltc3676.o After: text data bss dec hex filename 6121 304 8 6433 1921 drivers/regulator/ltc3676.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-4-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 13:28:01 +0300