summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-04-16selftests/tcp_ao: Make RST tests less flakyDmitry Safonov1-10/+13
Currently, "active reset" cases are flaky, because select() is called for 3 sockets, while only 2 are expected to receive RST. The idea of the third socket was to get into request_sock_queue, but the test mistakenly attempted to connect() after the listener socket was shut down. Repair this test, it's important to check the different kernel code-paths for signing RST TCP-AO segments. Fixes: c6df7b2361d7 ("selftests/net: Add TCP-AO RST test") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-15octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementationAsbjørn Sloth Tønnesen1-2/+5
Upon reviewing the flower control flags handling in this driver, I notice that the key wasn't being used, only the mask. Ie. `tc flower ... ip_flags nofrag` was hardware offloaded as `... ip_flags frag`. Only compile tested, no access to HW. Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-15inet: bring NLM_DONE out to a separate recv() againJakub Kicinski1-0/+5
Commit under Fixes optimized the number of recv() calls needed during RTM_GETROUTE dumps, but we got multiple reports of applications hanging on recv() calls. Applications expect that a route dump will be terminated with a recv() reading an individual NLM_DONE message. Coalescing NLM_DONE is perfectly legal in netlink, but even tho reporters fixed the code in respective projects, chances are it will take time for those applications to get updated. So revert to old behavior (for now)? Old kernel (5.19): $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 692 bytes, 11 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 Recv: read 20 bytes, 1 messages nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 Before (6.9-rc2): $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 712 bytes, 12 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 After: $ ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \ --dump getroute --json '{"rtm-family": 2}' Recv: read 692 bytes, 11 messages nl_len = 68 (52) nl_flags = 0x22 nl_type = 24 ... nl_len = 60 (44) nl_flags = 0x22 nl_type = 24 Recv: read 20 bytes, 1 messages nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 Reported-by: Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/all/20240315124808.033ff58d@elisabeth Reported-by: Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/all/02b50aae-f0e9-47a4-8365-a977a85975d3@ovn.org Fixes: 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU protection") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-14net: change maximum number of UDP segments to 128Yuri Benditovich2-2/+2
The commit fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") adds check of potential number of UDP segments vs UDP_MAX_SEGMENTS in linux/virtio_net.h. After this change certification test of USO guest-to-guest transmit on Windows driver for virtio-net device fails, for example with packet size of ~64K and mss of 536 bytes. In general the USO should not be more restrictive than TSO. Indeed, in case of unreasonably small mss a lot of segments can cause queue overflow and packet loss on the destination. Limit of 128 segments is good for any practical purpose, with minimal meaningful mss of 536 the maximal UDP packet will be divided to ~120 segments. The number of segments for UDP packets is validated vs UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect quest-to-guest path but does affect packets sent to host, for example. It is important to mention that UDP_MAX_SEGMENTS is kernel-only define and not available to user mode socket applications. In order to request MSS smaller than MTU the applications just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is no limitations on socket API level. Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation") Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-13Merge branch 'mlx5-fixes'Jakub Kicinski10-23/+39
Tariq Toukan says: ==================== mlx5 fixes This patchset provides bug fixes to mlx5 core and Eth drivers. ==================== Link: https://lore.kernel.org/r/20240411115444.374475-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5e: Prevent deadlock while disabling aRFSCarolina Jubran1-11/+16
When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 45bf454ae884 ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivationCarolina Jubran1-0/+7
netif_queue_set_napi asserts whether RTNL lock is held if the netdev is initialized. Acquire the RTNL lock before activating or deactivating RQs/SQs if the lock has not been held before in the flow. Fixes: f25e7b82635f ("net/mlx5e: link NAPI instances to queues and IRQs") Cc: Joe Damato <jdamato@fastly.com> Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5e: Use channel mdev reference instead of global mdev instance for ↵Rahul Rameshbabu1-2/+2
coalescing Channels can potentially have independent mdev instances. Do not refer to the global mdev instance in the mlx5e_priv instance for channel FW operations related to coalescing. CQ numbers that would be valid on the channel's mdev instance may not be correctly referenced if using the mlx5e_priv instance. Fixes: 67936e138586 ("net/mlx5e: Let channels be SD-aware") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5: Restore mistakenly dropped parts in register devlink flowShay Drory2-2/+4
Code parts from cited commit were mistakenly dropped while rebasing before submission. Add them here. Fixes: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5: SD, Handle possible devcom ERR_PTRTariq Toukan5-7/+7
Check if devcom holds an error pointer and return immediately. This fixes Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c:221 sd_register() error: 'devcom' dereferencing possible ERR_PTR() Enhance mlx5_devcom_register_component() so it stops returning NULL, making it easier for its callers. Fixes: d3d057666090 ("net/mlx5: SD, Implement devcom communication and primary election") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/all/f09666c8-e604-41f6-958b-4cc55c73faf9@gmail.com/T/ Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net/mlx5: Lag, restore buckets number to default after hash LAG deactivationShay Drory1-1/+3
The cited patch introduces the concept of buckets in LAG in hash mode. However, the patch doesn't clear the number of buckets in the LAG deactivation. This results in using the wrong number of buckets in case user create a hash mode LAG and afterwards create a non-hash mode LAG. Hence, restore buckets number to default after hash mode LAG deactivation. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13net: sparx5: flower: fix fragment flags handlingAsbjørn Sloth Tønnesen1-21/+40
I noticed that only 3 out of the 4 input bits were used, mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked. In order to avoid a complicated maze, I converted it to use a 16 byte mapping table. As shown in the table below the old heuristics doesn't always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1 then it used to only match follow-up fragment packets. Here are all the combinations, and their resulting new/old VCAP key/mask filter: /- FLOW_DIS_IS_FRAGMENT (key/mask) | /- FLOW_DIS_FIRST_FRAG (key/mask) | | /-- new VCAP fragment (key/mask) v v v v- old VCAP fragment (key/mask) 0/0 0/0 -/- -/- impossible (due to entry cond. on mask) 0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag) 0/0 1/0 -/- -/- impossible (key > mask) 0/0 1/1 1/3 1/3 first fragment 0/1 0/0 0/3 3/3 !! not fragmented 0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment) 0/1 1/0 -/- -/- impossible (key > mask) 0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag) 1/0 0/0 -/- -/- impossible (key > mask) 1/0 0/1 -/- -/- impossible (key > mask) 1/0 1/0 -/- -/- impossible (key > mask) 1/0 1/1 -/- -/- impossible (key > mask) 1/1 0/0 1/1 3/3 !! some fragment 1/1 0/1 3/3 3/3 follow-up fragment 1/1 1/0 -/- -/- impossible (key > mask) 1/1 1/1 1/3 1/3 first fragment In the datasheet the VCAP fragment values are documented as: 0 = no fragment 1 = initial fragment 2 = suspicious fragment 3 = valid follow-up fragment Result: 3 combinations match the old behavior, 3 combinations have been corrected, 2 combinations are now invalid, and fail, 8 combinations are impossible. It should now be aligned with how FLOW_DIS_IS_FRAGMENT and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in net/core/flow_dissector.c Since the VCAP fragment values are not a bitfield, we have to ignore the suspicious fragment value, eg. when matching on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1. Only compile tested, and logic tested in userspace, as I unfortunately don't have access to this switch chip (yet). Fixes: d6c2964db3fe ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Tested-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13Merge branch 'af_unix-fix-msg_oob-bugs-with-msg_peek'Jakub Kicinski1-6/+6
Kuniyuki Iwashima says: ==================== af_unix: Fix MSG_OOB bugs with MSG_PEEK. Currently, OOB data can be read without MSG_OOB accidentally in two cases, and this seris fixes the bugs. v1: https://lore.kernel.org/netdev/20240409225209.58102-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240410171016.7621-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13af_unix: Don't peek OOB data without MSG_OOB.Kuniyuki Iwashima1-5/+5
Currently, we can read OOB data without MSG_OOB by using MSG_PEEK when OOB data is sitting on the front row, which is apparently wrong. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) b'a' If manage_oob() is called when no data has been copied, we only check if the socket enables SO_OOBINLINE or MSG_PEEK is not used. Otherwise, the skb is returned as is. However, here we should return NULL if MSG_PEEK is set and no data has been copied. Also, in such a case, we should not jump to the redo label because we will be caught in the loop and hog the CPU until normal data comes in. Then, we need to handle skb == NULL case with the if-clause below the manage_oob() block. With this patch: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'a', MSG_OOB) 1 >>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT) Traceback (most recent call last): File "<stdin>", line 1, in <module> BlockingIOError: [Errno 11] Resource temporarily unavailable Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240410171016.7621-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-13af_unix: Call manage_oob() for every skb in unix_stream_read_generic().Kuniyuki Iwashima1-1/+1
When we call recv() for AF_UNIX socket, we first peek one skb and calls manage_oob() to check if the skb is sent with MSG_OOB. However, when we fetch the next (and the following) skb, manage_oob() is not called now, leading a wrong behaviour. Let's say a socket send()s "hello" with MSG_OOB and the peer tries to recv() 5 bytes with MSG_PEEK. Here, we should get only "hell" without 'o', but actually not: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hello', MSG_OOB) 5 >>> c2.recv(5, MSG_PEEK) b'hello' The first skb fills 4 bytes, and the next skb is peeked but not properly checked by manage_oob(). Let's move up the again label to call manage_oob() for evry skb. With this patch: >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) >>> c1.send(b'hello', MSG_OOB) 5 >>> c2.recv(5, MSG_PEEK) b'hell' Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240410171016.7621-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12Merge tag 'nf-24-04-11' of ↵David S. Miller10-25/+91
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-11Merge tag 'net-6.9-rc4' of ↵Linus Torvalds69-356/+743
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth. Current release - new code bugs: - netfilter: complete validation of user input - mlx5: disallow SRIOV switchdev mode when in multi-PF netdev Previous releases - regressions: - core: fix u64_stats_init() for lockdep when used repeatedly in one file - ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr - bluetooth: fix memory leak in hci_req_sync_complete() - batman-adv: avoid infinite loop trying to resize local TT - drv: geneve: fix header validation in geneve[6]_xmit_skb - drv: bnxt_en: fix possible memory leak in bnxt_rdma_aux_device_init() - drv: mlx5: offset comp irq index in name by one - drv: ena: avoid double-free clearing stale tx_info->xdpf value - drv: pds_core: fix pdsc_check_pci_health deadlock Previous releases - always broken: - xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING - bluetooth: fix setsockopt not validating user input - af_unix: clear stale u->oob_skb. - nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies - drv: virtio_net: fix guest hangup on invalid RSS update - drv: mlx5e: Fix mlx5e_priv_init() cleanup flow - dsa: mt7530: trap link-local frames regardless of ST Port State" * tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits) net: ena: Set tx_info->xdpf value to NULL net: ena: Fix incorrect descriptor free behavior net: ena: Wrong missing IO completions check order net: ena: Fix potential sign extension issue af_unix: Fix garbage collector racing against connect() net: dsa: mt7530: trap link-local frames regardless of ST Port State Revert "s390/ism: fix receive message buffer allocation" net: sparx5: fix wrong config being used when reconfiguring PCS net/mlx5: fix possible stack overflows net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev net/mlx5e: RSS, Block XOR hash with over 128 channels net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit net/mlx5e: HTB, Fix inconsistencies with QoS SQs number net/mlx5e: Fix mlx5e_priv_init() cleanup flow net/mlx5e: RSS, Block changing channels number when RXFH is configured net/mlx5: Correctly compare pkt reformat ids net/mlx5: Properly link new fs rules into the tree net/mlx5: offset comp irq index in name by one net/mlx5: Register devlink first under devlink lock net/mlx5: E-switch, store eswitch pointer before registering devlink_param ...
2024-04-11Merge tag 'scsi-fixes' of ↵Linus Torvalds5-11/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "The most important fix is the sg one because the regression it fixes (spurious warning and use after final put) is already backported to stable. The next biggest impact is the target fix for wrong credentials used to load a module because it's affecting new kernels installed on selinux based distributions. The other three fixes are an obvious off by one and SATA protocol issues" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() scsi: hisi_sas: Handle the NCQ error returned by D2H frame scsi: target: Fix SELinux error when systemd-modules loads the target module scsi: sg: Avoid race in error handling & drop bogus warn
2024-04-11Merge tag 'loongarch-fixes-6.9-1' of ↵Linus Torvalds10-17/+121
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: - make {virt, phys, page, pfn} translation work with KFENCE for LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE enabled) - update dts files for Loongson-2K series to make devices work correctly - fix a build error * tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE mm: Move lowmem_page_address() a little later
2024-04-11Merge tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefsLinus Torvalds27-238/+372
Pull more bcachefs fixes from Kent Overstreet: "Notable user impacting bugs - On multi device filesystems, recovery was looping in btree_trans_too_many_iters(). This checks if a transaction has touched too many btree paths (because of iteration over many keys), and isuses a restart to drop unneeded paths. But it's now possible for some paths to exceed the previous limit without iteration in the interior btree update path, since the transaction commit will do alloc updates for every old and new btree node, and during journal replay we don't use the btree write buffer for locking reasons and thus those updates use btree paths when they wouldn't normally. - Fix a corner case in rebalance when moving extents on a durability=0 device. This wouldn't be hit when a device was formatted with durability=0 since in that case we'll only use it as a write through cache (only cached extents will live on it), but durability can now be changed on an existing device. - bch2_get_acl() could rarely forget to handle a transaction restart; this manifested as the occasional missing acl that came back after dropping caches. - Fix a major performance regression on high iops multithreaded write workloads (only since 6.9-rc1); a previous fix for a deadlock in the interior btree update path to check the journal watermark introduced a dependency on the state of btree write buffer flushing that we didn't want. - Assorted other repair paths and recovery fixes" * tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits) bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter() bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail() bcachefs: Fix a race in btree_update_nodes_written() bcachefs: btree_node_scan: Respect member.data_allowed bcachefs: Don't scan for btree nodes when we can reconstruct bcachefs: Fix check_topology() when using node scan bcachefs: fix eytzinger0_find_gt() bcachefs: fix bch2_get_acl() transaction restart handling bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take() bcachefs: Rename struct field swap to prevent macro naming collision MAINTAINERS: Add entry for bcachefs documentation Documentation: filesystems: Add bcachefs toctree bcachefs: JOURNAL_SPACE_LOW bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems bcachefs: fix rand_delete unit test bcachefs: fix ! vs ~ typo in __clear_bit_le64() bcachefs: Fix rebalance from durability=0 device bcachefs: Print shutdown journal sequence number ...
2024-04-11Merge tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of ↵Linus Torvalds1-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Tzung-Bi Shih: "Fix a NULL pointer dereference" * tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_uart: properly fix race condition
2024-04-11netfilter: flowtable: incorrect pppoe tuplePablo Neira Ayuso1-1/+1
pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path. Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: flowtable: validate pppoe headerPablo Neira Ayuso3-5/+18
Ensure there is sufficient room to access the protocol field of the PPPoe header. Validate it once before the flowtable lookup, then use a helper function to access protocol field. Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: nft_set_pipapo: do not free live elementFlorian Westphal1-5/+9
Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo: add_elem("00000000") timeout 100 ms ... add_elem("0000000X") timeout 100 ms del_elem("0000000X") <---------------- delete one that was just added ... add_elem("00005000") timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano) Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: nft_set_pipapo: walk over current view on netlink dumpPablo Neira Ayuso3-2/+23
The generation mask can be updated while netlink dump is in progress. The pipapo set backend walk iterator cannot rely on it to infer what view of the datastructure is to be used. Add notation to specify if user wants to read/update the set. Based on patch from Florian Westphal. Fixes: 2b84e215f874 ("netfilter: nft_set_pipapo: .walk does not deal with generations") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: br_netfilter: skip conntrack input hook for promisc packetsPablo Neira Ayuso4-8/+28
For historical reasons, when bridge device is in promisc mode, packets that are directed to the taps follow bridge input hook path. This patch adds a workaround to reset conntrack for these packets. Jianbo Liu reports warning splats in their test infrastructure where cloned packets reach the br_netfilter input hook to confirm the conntrack object. Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has reached the input hook because it is passed up to the bridge device to reach the taps. [ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core [ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19 [ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1 [ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202 [ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000 [ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000 [ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003 [ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000 [ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800 [ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000 [ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0 [ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.585440] Call Trace: [ 57.585721] <IRQ> [ 57.585976] ? __warn+0x7d/0x130 [ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.586811] ? report_bug+0xf1/0x1c0 [ 57.587177] ? handle_bug+0x3f/0x70 [ 57.587539] ? exc_invalid_op+0x13/0x60 [ 57.587929] ? asm_exc_invalid_op+0x16/0x20 [ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.588825] nf_hook_slow+0x3d/0xd0 [ 57.589188] ? br_handle_vlan+0x4b/0x110 [ 57.589579] br_pass_frame_up+0xfc/0x150 [ 57.589970] ? br_port_flags_change+0x40/0x40 [ 57.590396] br_handle_frame_finish+0x346/0x5e0 [ 57.590837] ? ipt_do_table+0x32e/0x430 [ 57.591221] ? br_handle_local_finish+0x20/0x20 [ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter] [ 57.592286] ? br_handle_local_finish+0x20/0x20 [ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter] [ 57.593348] ? br_handle_local_finish+0x20/0x20 [ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat] [ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter] [ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter] [ 57.595280] br_handle_frame+0x1f3/0x3d0 [ 57.595676] ? br_handle_local_finish+0x20/0x20 [ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0 [ 57.596566] __netif_receive_skb_core+0x25b/0xfc0 [ 57.597017] ? __napi_build_skb+0x37/0x40 [ 57.597418] __netif_receive_skb_list_core+0xfb/0x220 Fixes: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack") Reported-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()Ziyang Xuan1-2/+6
nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process. Fixes: e50092404c1b ("netfilter: nf_tables: add stateful objects") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()Ziyang Xuan1-2/+6
nft_unregister_expr() can concurrent with __nft_expr_type_get(), and there is not any protection when iterate over nf_tables_expressions list in __nft_expr_type_get(). Therefore, there is potential data-race of nf_tables_expressions list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_expressions list in __nft_expr_type_get(), and use rcu_read_lock() in the caller nft_expr_type_get() to protect the entire type query process. Fixes: ef1f7df9170d ("netfilter: nf_tables: expression ops overloading") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-11Merge branch 'ena-driver-bug-fixes'Paolo Abeni3-14/+27
David Arinzon says: ==================== ENA driver bug fixes From: David Arinzon <darinzon@amazon.com> This patchset contains multiple bug fixes for the ENA driver. ==================== Link: https://lore.kernel.org/r/20240410091358.16289-1-darinzon@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: ena: Set tx_info->xdpf value to NULLDavid Arinzon1-1/+3
The patch mentioned in the `Fixes` tag removed the explicit assignment of tx_info->xdpf to NULL with the justification that there's no need to set tx_info->xdpf to NULL and tx_info->num_of_bufs to 0 in case of a mapping error. Both values won't be used once the mapping function returns an error, and their values would be overridden by the next transmitted packet. While both values do indeed get overridden in the next transmission call, the value of tx_info->xdpf is also used to check whether a TX descriptor's transmission has been completed (i.e. a completion for it was polled). An example scenario: 1. Mapping failed, tx_info->xdpf wasn't set to NULL 2. A VF reset occurred leading to IO resource destruction and a call to ena_free_tx_bufs() function 3. Although the descriptor whose mapping failed was freed by the transmission function, it still passes the check if (!tx_info->skb) (skb and xdp_frame are in a union) 4. The xdp_frame associated with the descriptor is freed twice This patch returns the assignment of NULL to tx_info->xdpf to make the cleaning function knows that the descriptor is already freed. Fixes: 504fd6a5390c ("net: ena: fix DMA mapping function issues in XDP") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: ena: Fix incorrect descriptor free behaviorDavid Arinzon1-3/+11
ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: ena: Wrong missing IO completions check orderDavid Arinzon1-9/+12
Missing IO completions check is called every second (HZ jiffies). This commit fixes several issues with this check: 1. Duplicate queues check: Max of 4 queues are scanned on each check due to monitor budget. Once reaching the budget, this check exits under the assumption that the next check will continue to scan the remainder of the queues, but in practice, next check will first scan the last already scanned queue which is not necessary and may cause the full queue scan to last a couple of seconds longer. The fix is to start every check with the next queue to scan. For example, on 8 IO queues: Bug: [0,1,2,3], [3,4,5,6], [6,7] Fix: [0,1,2,3], [4,5,6,7] 2. Unbalanced queues check: In case the number of active IO queues is not a multiple of budget, there will be checks which don't utilize the full budget because the full scan exits when reaching the last queue id. The fix is to run every TX completion check with exact queue budget regardless of the queue id. For example, on 7 IO queues: Bug: [0,1,2,3], [4,5,6], [0,1,2,3] Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4] The budget may be lowered in case the number of IO queues is less than the budget (4) to make sure there are no duplicate queues on the same check. For example, on 3 IO queues: Bug: [0,1,2,0], [1,2,0,1] Fix: [0,1,2], [0,1,2] Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: ena: Fix potential sign extension issueDavid Arinzon1-1/+1
Small unsigned types are promoted to larger signed types in the case of multiplication, the result of which may overflow. In case the result of such a multiplication has its MSB turned on, it will be sign extended with '1's. This changes the multiplication result. Code example of the phenomenon: ------------------------------- u16 x, y; size_t z1, z2; x = y = 0xffff; printk("x=%x y=%x\n",x,y); z1 = x*y; z2 = (size_t)x*y; printk("z1=%lx z2=%lx\n", z1, z2); Output: ------- x=ffff y=ffff z1=fffffffffffe0001 z2=fffe0001 The expected result of ffff*ffff is fffe0001, and without the explicit casting to avoid the unwanted sign extension we got fffffffffffe0001. This commit adds an explicit casting to avoid the sign extension issue. Fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11Merge tag 'for-net-2024-04-10' of ↵Paolo Abeni9-99/+79
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - L2CAP: Don't double set the HCI_CONN_MGMT_CONNECTED bit - Fix memory leak in hci_req_sync_complete - hci_sync: Fix using the same interval and window for Coded PHY - Fix not validating setsockopt user input * tag 'for-net-2024-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit Bluetooth: hci_sock: Fix not validating setsockopt user input Bluetooth: ISO: Fix not validating setsockopt user input Bluetooth: L2CAP: Fix not validating setsockopt user input Bluetooth: RFCOMM: Fix not validating setsockopt user input Bluetooth: SCO: Fix not validating setsockopt user input Bluetooth: Fix memory leak in hci_req_sync_complete() Bluetooth: hci_sync: Fix using the same interval and window for Coded PHY Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset ==================== Link: https://lore.kernel.org/r/20240410191610.4156653-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11af_unix: Fix garbage collector racing against connect()Michal Luczaj1-1/+17
Garbage collector does not take into account the risk of embryo getting enqueued during the garbage collection. If such embryo has a peer that carries SCM_RIGHTS, two consecutive passes of scan_children() may see a different set of children. Leading to an incorrectly elevated inflight count, and then a dangling pointer within the gc_inflight_list. sockets are AF_UNIX/SOCK_STREAM S is an unconnected socket L is a listening in-flight socket bound to addr, not in fdtable V's fd will be passed via sendmsg(), gets inflight count bumped connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc() ---------------- ------------------------- ----------- NS = unix_create1() skb1 = sock_wmalloc(NS) L = unix_find_other(addr) unix_state_lock(L) unix_peer(S) = NS // V count=1 inflight=0 NS = unix_peer(S) skb2 = sock_alloc() skb_queue_tail(NS, skb2[V]) // V became in-flight // V count=2 inflight=1 close(V) // V count=1 inflight=1 // GC candidate condition met for u in gc_inflight_list: if (total_refs == inflight_refs) add u to gc_candidates // gc_candidates={L, V} for u in gc_candidates: scan_children(u, dec_inflight) // embryo (skb1) was not // reachable from L yet, so V's // inflight remains unchanged __skb_queue_tail(L, skb1) unix_state_unlock(L) for u in gc_candidates: if (u.inflight) scan_children(u, inc_inflight_move_tail) // V count=1 inflight=2 (!) If there is a GC-candidate listening socket, lock/unlock its state. This makes GC wait until the end of any ongoing connect() to that socket. After flipping the lock, a possibly SCM-laden embryo is already enqueued. And if there is another embryo coming, it can not possibly carry SCM_RIGHTS. At this point, unix_inflight() can not happen because unix_gc_lock is already taken. Inflight graph remains unaffected. Fixes: 1fd05ba5a2f2 ("[AF_UNIX]: Rewrite garbage collector, fixes race.") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240409201047.1032217-1-mhal@rbox.co Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: dsa: mt7530: trap link-local frames regardless of ST Port StateArınç ÜNAL2-34/+200
In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) of the Open Systems Interconnection basic reference model (OSI/RM) are described; the medium access control (MAC) and logical link control (LLC) sublayers. The MAC sublayer is the one facing the physical layer. In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A Bridge component comprises a MAC Relay Entity for interconnecting the Ports of the Bridge, at least two Ports, and higher layer entities with at least a Spanning Tree Protocol Entity included. Each Bridge Port also functions as an end station and shall provide the MAC Service to an LLC Entity. Each instance of the MAC Service is provided to a distinct LLC Entity that supports protocol identification, multiplexing, and demultiplexing, for protocol data unit (PDU) transmission and reception by one or more higher layer entities. It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC Entity associated with each Bridge Port is modeled as being directly connected to the attached Local Area Network (LAN). On the switch with CPU port architecture, CPU port functions as Management Port, and the Management Port functionality is provided by software which functions as an end station. Software is connected to an IEEE 802 LAN that is wholly contained within the system that incorporates the Bridge. Software provides access to the LLC Entity associated with each Bridge Port by the value of the source port field on the special tag on the frame received by software. We call frames that carry control information to determine the active topology and current extent of each Virtual Local Area Network (VLAN), i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration Protocol Data Units (MVRPDUs), and frames from other link constrained protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They are not forwarded by a Bridge. Permanently configured entries in the filtering database (FDB) ensure that such frames are discarded by the Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: Each of the reserved MAC addresses specified in Table 8-1 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be permanently configured in the FDB in C-VLAN components and ERs. Each of the reserved MAC addresses specified in Table 8-2 (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently configured in the FDB in S-VLAN components. Each of the reserved MAC addresses specified in Table 8-3 (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in TPMR components. The FDB entries for reserved MAC addresses shall specify filtering for all Bridge Ports and all VIDs. Management shall not provide the capability to modify or remove entries for reserved MAC addresses. The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of propagation of PDUs within a Bridged Network, as follows: The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. PDUs transmitted using this destination address, or any other addresses that appear in Table 8-1, Table 8-2, and Table 8-3 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can therefore travel no further than those stations that can be reached via a single individual LAN from the originating station. The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an address that no conformant S-VLAN component, C-VLAN component, or MAC Bridge can forward; however, this address is relayed by a TPMR component. PDUs using this destination address, or any of the other addresses that appear in both Table 8-1 and Table 8-2 but not in Table 8-3 (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by any TPMRs but will propagate no further than the nearest S-VLAN component, C-VLAN component, or MAC Bridge. The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address that no conformant C-VLAN component, MAC Bridge can forward; however, it is relayed by TPMR components and S-VLAN components. PDUs using this destination address, or any of the other addresses that appear in Table 8-1 but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and S-VLAN components but will propagate no further than the nearest C-VLAN component or MAC Bridge. Because the LLC Entity associated with each Bridge Port is provided via CPU port, we must not filter these frames but forward them to CPU port. In a Bridge, the transmission Port is majorly decided by ingress and egress rules, FDB, and spanning tree Port State functions of the Forwarding Process. For link-local frames, only CPU port should be designated as destination port in the FDB, and the other functions of the Forwarding Process must not interfere with the decision of the transmission Port. We call this process trapping frames to CPU port. Therefore, on the switch with CPU port architecture, link-local frames must be trapped to CPU port, and certain link-local frames received by a Port of a Bridge comprising a TPMR component or an S-VLAN component must be excluded from it. A Bridge of the switch with CPU port architecture cannot comprise a Two-Port MAC Relay (TPMR) component as a TPMR component supports only a subset of the functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port doesn't count) of this architecture will either function as a standard MAC Bridge or a standard VLAN Bridge. Therefore, a Bridge of this architecture can only comprise S-VLAN components, C-VLAN components, or MAC Bridge components. Since there's no TPMR component, we don't need to relay PDUs using the destination addresses specified on the Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge section where they must be relayed by TPMR components. One option to trap link-local frames to CPU port is to add static FDB entries with CPU port designated as destination port. However, because that Independent VLAN Learning (IVL) is being used on every VID, each entry only applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC Bridge component or a C-VLAN component, there would have to be 16 times 4096 entries. This switch intellectual property can only hold a maximum of 2048 entries. Using this option, there also isn't a mechanism to prevent link-local frames from being discarded when the spanning tree Port State of the reception Port is discarding. The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 registers. Whilst this applies to every VID, it doesn't contain all of the reserved MAC addresses without affecting the remaining Standard Group MAC Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF destination addresses which may be relayed by MAC Bridges or VLAN Bridges. The latter option provides better but not complete conformance. This switch intellectual property also does not provide a mechanism to trap link-local frames with specific destination addresses to CPU port by Bridge, to conform to the filtering rules for the distinct Bridge components. Therefore, regardless of the type of the Bridge component, link-local frames with these destination addresses will be trapped to CPU port: 01-80-C2-00-00-[00,01,02,03,0E] In a Bridge comprising a MAC Bridge component or a C-VLAN component: Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] In a Bridge comprising an S-VLAN component: Link-local frames with these destination addresses will be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-00 Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A] Currently on this switch intellectual property, if the spanning tree Port State of the reception Port is discarding, link-local frames will be discarded. To trap link-local frames regardless of the spanning tree Port State, make the switch regard them as Bridge Protocol Data Units (BPDUs). This switch intellectual property only lets the frames regarded as BPDUs bypass the spanning tree Port State function of the Forwarding Process. With this change, the only remaining interference is the ingress rules. When the reception Port has no PVID assigned on software, VLAN-untagged frames won't be allowed in. There doesn't seem to be a mechanism on the switch intellectual property to have link-local frames bypass this function of the Forwarding Process. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reviewed-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20240409-b4-for-net-mt7530-fix-link-local-when-stp-discarding-v2-1-07b1150164ac@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11Revert "s390/ism: fix receive message buffer allocation"Gerd Bayer1-29/+9
This reverts commit 58effa3476536215530c9ec4910ffc981613b413. Review was not finished on this patch. So it's not ready for upstreaming. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Link: https://lore.kernel.org/r/20240409113753.2181368-1-gbayer@linux.ibm.com Fixes: 58effa347653 ("s390/ism: fix receive message buffer allocation") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: sparx5: fix wrong config being used when reconfiguring PCSDaniel Machon1-2/+2
The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net/mlx5: fix possible stack overflowsArnd Bergmann1-41/+41
A couple of debug functions use a 512 byte temporary buffer and call another function that has another buffer of the same size, which in turn exceeds the usual warning limit for excessive stack usage: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1073:1: error: stack frame size (1448) exceeds limit (1024) in 'dr_dump_start' [-Werror,-Wframe-larger-than] dr_dump_start(struct seq_file *file, loff_t *pos) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1009:1: error: stack frame size (1120) exceeds limit (1024) in 'dr_dump_domain' [-Werror,-Wframe-larger-than] dr_dump_domain(struct seq_file *file, struct mlx5dr_domain *dmn) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:705:1: error: stack frame size (1104) exceeds limit (1024) in 'dr_dump_matcher_rx_tx' [-Werror,-Wframe-larger-than] dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, Rework these so that each of the various code paths only ever has one of these buffers in it, and exactly the functions that declare one have the 'noinline_for_stack' annotation that prevents them from all being inlined into the same caller. Fixes: 917d1e799ddf ("net/mlx5: DR, Change SWS usage to debug fs seq_file interface") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/all/20240219100506.648089-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240408074142.3007036-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11Merge branch 'mlx5-misc-fixes'Jakub Kicinski14-53/+131
Tariq Toukan says: ==================== mlx5 misc fixes This patchset provides bug fixes to mlx5 driver. This is V2 of the series previously submitted as PR by Saeed: https://lore.kernel.org/netdev/20240326144646.2078893-1-saeed@kernel.org/T/ Series generated against: commit 237f3cf13b20 ("xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING") ==================== Link: https://lore.kernel.org/r/20240409190820.227554-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdevTariq Toukan1-0/+7
Adaptations need to be made for the auxiliary device management in the core driver level. Block this combination for now. Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-12-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5e: RSS, Block XOR hash with over 128 channelsCarolina Jubran3-2/+34
When supporting more than 128 channels, the RQT size is calculated by multiplying the number of channels by 2 and rounding up to the nearest power of 2. The index of the RQT is derived from the RSS hash calculations. If XOR8 is used as the RSS hash function, there are only 256 possible hash results, and therefore, only 256 indexes can be reached in the RQT. Block setting the RSS hash function to XOR when the number of channels exceeds 128. Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmitRahul Rameshbabu2-5/+10
Free Tx port timestamping metadata entries in the NAPI poll context and consume metadata enties in the WQE xmit path. Do not free a Tx port timestamping metadata entry in the WQE xmit path even in the error path to avoid a race between two metadata entry producers. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5e: HTB, Fix inconsistencies with QoS SQs numberCarolina Jubran1-16/+17
When creating a new HTB class while the interface is down, the variable that follows the number of QoS SQs (htb_max_qos_sqs) may not be consistent with the number of HTB classes. Previously, we compared these two values to ensure that the node_qid is lower than the number of QoS SQs, and we allocated stats for that SQ when they are equal. Change the check to compare the node_qid with the current number of leaf nodes and fix the checking conditions to ensure allocation of stats_list and stats for each node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5e: Fix mlx5e_priv_init() cleanup flowCarolina Jubran2-2/+2
When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 8bf30be75069 ("net/mlx5e: Introduce select queue parameters") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5e: RSS, Block changing channels number when RXFH is configuredCarolina Jubran1-0/+17
Changing the channels number after configuring the receive flow hash indirection table may affect the RSS table size. The previous configuration may no longer be compatible with the new receive flow hash indirection table. Block changing the channels number when RXFH is configured and changing the channels number requires resizing the RSS table size. Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5: Correctly compare pkt reformat idsCosmin Ratiu1-2/+12
struct mlx5_pkt_reformat contains a naked union of a u32 id and a dr_action pointer which is used when the action is SW-managed (when pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id directly in that case is incorrect, as it maps to the least significant 32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt reformat id allocated in firmware. For the purpose of comparing whether two rules are identical, interpreting the least significant 32 bits of the mlx5_fs_dr_action pointer as an id mostly works... until it breaks horribly and produces the outcome described in [1]. This patch fixes mlx5_flow_dests_cmp to correctly compare ids using mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules. Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5: Properly link new fs rules into the treeCosmin Ratiu1-1/+2
Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de93712 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5: offset comp irq index in name by oneMichael Liang1-1/+3
The mlx5 comp irq name scheme is changed a little bit between commit 3663ad34bc70 ("net/mlx5: Shift control IRQ to the last index") and commit 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation"). The index in the comp irq name used to start from 0 but now it starts from 1. There is nothing critical here, but it's harmless to change back to the old behavior, a.k.a starting from 0. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Michael Liang <mliang@purestorage.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net/mlx5: Register devlink first under devlink lockShay Drory2-18/+20
In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240409190820.227554-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-02 15:11:28 +0300