summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-14ipv6: icmp6: add drop reason support to ndisc_rcv()Eric Dumazet4-8/+18
Creates three new drop reasons: SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc). SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit. SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14ipv6: icmp6: add drop reason support to icmpv6_notify()Eric Dumazet2-9/+19
Accurately reports what happened in icmpv6_notify() when handling a packet. This makes use of the new IPV6_BAD_EXTHDR drop reason. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: add pskb_may_pull_reason() helperEric Dumazet1-4/+15
pskb_may_pull() can fail for two different reasons. Provide pskb_may_pull_reason() helper to distinguish between these reasons. It returns: SKB_NOT_DROPPED_YET : Success SKB_DROP_REASON_PKT_TOO_SMALL : packet too small SKB_DROP_REASON_NOMEM : skb->head could not be resized Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: dropreason: add SKB_DROP_REASON_IPV6_BAD_EXTHDREric Dumazet1-0/+3
This drop reason can be used whenever an IPv6 packet has a malformed extension header. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: stmmac: dwc-qos: Make struct dwc_eth_dwmac_data::remove return voidUwe Kleine-König1-12/+5
All implementations of the remove callback return 0 unconditionally. So in dwc_eth_dwmac_remove() there is no error handling necessary. Simplify accordingly. This is a preparation for making struct platform_driver::remove return void, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230211112431.214252-2-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: stmmac: Make stmmac_dvr_remove() return voidUwe Kleine-König7-15/+15
The function returns zero unconditionally. Change it to return void instead which simplifies some callers as error handing becomes unnecessary. This also makes it more obvious that most platform remove callbacks always return zero. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230211112431.214252-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: mvneta: do not set xdp_features for hw buffer devicesLorenzo Bianconi1-3/+6
Devices with hardware buffer management do not support XDP, so do not set xdp_features for them. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/19b5838bb3e4515750af822edb2fa5e974d0a86b.1676196230.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14hv_netvsc: add missing NETDEV_XDP_ACT_NDO_XMIT xdp-features flagLorenzo Bianconi1-1/+2
Add missing ndo_xdp_xmit bit to xdp_features capability flag. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/8e3747018f0fd0b5d6e6b9aefe8d9448ca3a3288.1676195726.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: stmmac: add missing NETDEV_XDP_ACT_XSK_ZEROCOPY bit to xdp_featuresLorenzo Bianconi1-0/+1
Add missing xsk zero-copy bit to xdp_features capability flag. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c8949baafdf617188dcedb9033ce5a9ca6e9e5ff.1676195440.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: ethernet: mtk_wed: No need to clear memory after a dma_alloc_coherent() ↵Christophe JAILLET1-1/+0
call dma_alloc_coherent() already clears the allocated memory, there is no need to explicitly call memset(). Moreover, it is likely that the size in the memset() is incorrect and should be "size * sizeof(*ring->desc)". Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d5acce7dd108887832c9719f62c7201b4c83b3fb.1676184599.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net: lan966x: set xdp_features flagLorenzo Bianconi1-0/+5
Set xdp_features netdevice flag if lan966x nic supports xdp mode. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/01f4412f28899d97b0054c9c1a63694201301b42.1676055718.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13Merge branch 'ksz9477-eee-support'David S. Miller8-137/+554
Oleksij Rempel says: ==================== net: add EEE support for KSZ9477 switch family changes v8: - fix comment for linkmode_to_mii_eee_cap1_t() function - add Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> - add Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> changes v7: - update documentation for genphy_c45_eee_is_active() - address review comments on "net: dsa: microchip: enable EEE support" patch changes v6: - split patch set and send only first 9 patches - Add Reviewed-by: Andrew Lunn <andrew@lunn.ch> - use 0xffff instead of GENMASK - Document @supported_eee - use "()" with function name in comments changes v5: - spell fixes - move part of genphy_c45_read_eee_abilities() to genphy_c45_read_eee_cap1() - validate MDIO_PCS_EEE_ABLE register against 0xffff val. - rename *eee_100_10000* to *eee_cap1* - use linkmode_intersects(phydev->supported, PHY_EEE_CAP1_FEATURES) instead of !linkmode_empty() - add documentation to linkmode/register helpers changes v4: - remove following helpers: mmd_eee_cap_to_ethtool_sup_t mmd_eee_adv_to_ethtool_adv_t ethtool_adv_to_mmd_eee_adv_t and port drivers from this helpers to linkmode helpers. - rebase against latest net-next - port phy_init_eee() to genphy_c45_eee_is_active() changes v3: - rework some parts of EEE infrastructure and move it to c45 code. - add supported_eee storage and start using it in EEE code and by the micrel driver. - add EEE support for ar8035 PHY - add SmartEEE support to FEC i.MX series. changes v2: - use phydev->supported instead of reading MII_BMSR regiaster - fix @get_eee > @set_eee With this patch series we provide EEE control for KSZ9477 family of switches and AR8035 with i.MX6 configuration. According to my tests, on a system with KSZ8563 switch and 100Mbit idle link, we consume 0,192W less power per port if EEE is enabled. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: start using genphy_c45_ethtool_get/set_eee()Oleksij Rempel1-58/+2
All preparations are done. Now we can start using new functions and remove the old code. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: migrate phy_init_eee() to genphy_c45_eee_is_active()Oleksij Rempel1-75/+14
Reduce code duplicated by migrating phy_init_eee() to genphy_c45_eee_is_active(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: c45: migrate to genphy_c45_write_eee_adv()Oleksij Rempel1-1/+10
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: c22: migrate to genphy_c45_write_eee_adv()Oleksij Rempel1-1/+9
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv(). It should work as before except write operation to the EEE adv registers will be done only if some EEE abilities was detected. If some driver will have a regression, related driver should provide own .get_features callback. See micrel.c:ksz9477_get_features() as example. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_ethtool_get/set_eee() supportOleksij Rempel4-0/+311
Add replacement for phy_ethtool_get/set_eee() functions. Current phy_ethtool_get/set_eee() implementation is great and it is possible to make it even better: - this functionality is for devices implementing parts of IEEE 802.3 specification beyond Clause 22. The better place for this code is phy-c45.c - currently it is able to do read/write operations on PHYs with different abilities to not existing registers. It is better to use stored supported_eee abilities to avoid false read/write operations. - the eee_active detection will provide wrong results on not supported link modes. It is better to validate speed/duplex properties against supported EEE link modes. - it is able to support only limited amount of link modes. We have more EEE link modes... By refactoring this code I address most of this point except of the last one. Adding additional EEE link modes will need more work. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: export phy_check_valid() functionOleksij Rempel2-2/+3
This function will be needed for genphy_c45_ethtool_get_eee() provided by next patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: micrel: add ksz9477_get_features()Oleksij Rempel1-0/+21
KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control and capability 1" (Register 3.20) content depending on configuration of "EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect 3.20 register. So, instead of depending on register 3.20, driver should set supported_eee. Proper supported_eee configuration is needed to make use of generic PHY c45 set/get_eee functions provided by next patches. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: phy: add genphy_c45_read_eee_abilities() functionOleksij Rempel4-0/+118
Add generic function for EEE abilities defined by IEEE 802.3 specification. For now following registers are supported: - IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20) - IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register (Register 1.2295) Since I was not able to find any flag signaling support of these registers, we should detect link mode abilities first and then based on these abilities doing EEE link modes detection. Results of EEE ability detection will be stored into new variable phydev->supported_eee. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: dsa: microchip: enable EEE supportOleksij Rempel1-0/+66
Some of KSZ9477 family switches provides EEE support. To enable it, we just need to register set_mac_eee/set_mac_eee handlers and validate supported chip version and port. Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563, KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with 100BaseTX/Full. Other chips support 100BaseTX/Full and 1000BaseTX/Full. Low Power Idle configuration is not supported and currently not documented in the datasheets. EEE PHY specific tunings are not documented in the switch datasheets, but can overlap with KSZ9131 specification. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13Merge branch 'ionic-on-chip-desc'David S. Miller16-35/+438
Shannon Nelson says: ==================== ionic: on-chip descriptors We start with a couple of house-keeping patches that were originally presented for 'net', then we add support for on-chip descriptor rings for tx-push, as well as adding support for rx-push. I have a patch for the ethtool userland utility that I can send out once this has been accepted. v4: added rx-push attributes to ethtool netlink converted CMB feature from using a priv-flag to using ethtool tx/rx-push v3: edited commit message to describe interface-down limitation added warn msg if cmb_inuse alloc fails removed unnecessary clearing of phy_cmb_pages and cmb_npages changed cmb_rings_toggle to use cmb_inuse removed unrelated pci_set_drvdata() removed unnecessary (u32) cast added static inline func for writing CMB descriptors v2: dropped the rx buffers patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: add tx/rx-push support with device Component Memory BuffersShannon Nelson8-21/+404
The ionic device has on-board memory (CMB) that can be used for descriptors as a way to speed descriptor access for faster packet processing. It is rumored to improve latency and/or packets-per-second for some profiles of small packet traffic, although your mileage may vary. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ethtool: extend ringparam set/get APIs for rx_pushShannon Nelson5-5/+25
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary void castsShannon Nelson4-7/+7
Minor Code cleanup details. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13ionic: remove unnecessary indirectionShannon Nelson1-2/+2
We have the pointer already, don't need to go through the lif struct for it. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13Merge branch 'net-ipa-GSI-regs'David S. Miller7-281/+903
Alex Elder says: ==================== net: ipa: determine GSI register offsets differently This series changes the way GSI register offset are specified, using the "reg" mechanism currently used for IPA registers. A follow-on series will extend this work so fields within GSI registers are also specified this way. The first patch rearranges the GSI register initialization code so it is similar to the way it's done for the IPA registers. The second identifies all the GSI registers in an enumerated type. The third introduces "gsi_reg-v3.1.c" and uses the "reg" code to define one GSI register offset. The second-to-last patch just adds "gsi_reg-v3.5.1.c", because that version introduces a new register not previously defined. All the rest just define the rest of the GSI register offsets using the "reg" mechanism. Note that, to have continued lines align with an open parenthesis, new files created in this series cause some checkpatch warnings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: define IPA remaining GSI register offsetsAlex Elder5-27/+76
Add the remaining GSI register offset definitions. Use gsi_reg() rather than the corresponding GSI_*_OFFSET() macros to get the offsets for these registers, and get rid of the macros. Note that we are now defining information for the HW_PARAM_2 register, and that doesn't appear until IPA v3.5.1. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: add "gsi_v3.5.1.c"Alex Elder3-1/+185
The next patch adds a GSI register field that is only valid starting at IPA v3.5.1. Create "gsi_v3.5.1.c" from "gsi_v3.1.c", changing only the name of the public regs structure it defines. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: define IPA v3.1 GSI interrupt register offsetsAlex Elder3-102/+195
Add definitions of the offsets for IRQ-related GSI registers. Use gsi_reg() rather than the corresponding GSI_CNTXT_*_OFFSET() macros to get the offsets for these registers, and get rid of the macros. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: define IPA v3.1 GSI event ring register offsetsAlex Elder3-53/+90
Add definitions of the offsets and strides for registers whose offset depends on an event ring ID, and use gsi_reg() and its returned value to determine offsets for these registers. Get rid of the corresponding GSI_EV_CH_E_*_OFFSET() macros. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: add more GSI register definitionsAlex Elder3-38/+62
Continue populating with GSI register definitions, adding remaining registers whose offset depends on a channel ID. Use gsi_reg() and reg_n_offset() to determine offsets for those registers, and get rid of the corresponding GSI_CH_C_*_OFFSET() macros. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: start creating GSI register definitionsAlex Elder6-6/+75
Create a new register definition file in the "reg" subdirectory, and begin populating it with GSI register definitions based on IPA version. The GSI registers haven't changed much, so several IPA versions can share the same GSI register definitions. As with IPA registers, an array of pointers indexed by GSI register ID refers to these register definitions, and a new "regs" field in the GSI structure is initialized in gsi_reg_init() to refer to register information based on the IPA version (though for now there's only one). The new function gsi_reg() returns register information for a given GSI register, and the result can be used to look up that register's offset. This patch is meant only to put the infrastructure in place, so only eon register (CH_C_QOS) is defined for each version, and only the offset and stride are defined for that register. Use new function gsi_reg() to look up that register's information to get its offset, This makes the GSI_CH_C_QOS_OFFSET() unnecessary, so get rid of it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: introduce GSI register IDsAlex Elder2-0/+122
Create a new gsi_reg_id enumerated type, which identifies each GSI register with a symbolic identifier. Create a function that indicates whether a register ID is valid. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: ipa: introduce gsi_reg_init()Alex Elder4-59/+103
Create a new source file "gsi_reg.c", and in it, introduce a new function to encapsulate initializing GSI registers, including looking up and I/O mapping their memory. Create gsi_reg_exit() as the inverse of the init function. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net/sched: fix error recovery in qdisc_create()Eric Dumazet1-7/+8
If TCA_STAB attribute is malformed, qdisc_get_stab() returns an error, and we end up calling ops->destroy() while ops->init() has not been called yet. While we are at it, call qdisc_put_stab() after ops->destroy(). Fixes: 1f62879e3632 ("net/sched: make stab available before ops->init() call") Reported-by: syzbot+d44d88f1d11e6ca8576b@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13net: micrel: Add PHC support for lan8841Horatiu Vultur1-24/+599
Add support for PHC and timestamping operations for the lan8841 PHY. PTP 1-step and 2-step modes are supported, over Ethernet and UDP both ipv4 and ipv6. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13Merge branch 'devlink-params-cleanup'David S. Miller5-66/+91
Jiri Pirko says: ==================== devlink: params cleanups and devl_param_driverinit_value_get() fix The primary motivation of this patchset is the patch #6, which fixes an issue introduced by 075935f0ae0f ("devlink: protect devlink param list by instance lock") and reported by Kim Phillips <kim.phillips@amd.com> (https://lore.kernel.org/netdev/719de4f0-76ac-e8b9-38a9-167ae239efc7@amd.com/) and my colleagues doing mlx5 driver regression testing. The basis idea is that devl_param_driverinit_value_get() could be possible to the called without holding devlink intance lock in most of the cases (all existing ones in the current codebase), which would fix some mlx5 flows where the lock is not held. To achieve that, make sure that the param value does not change between reloads with patch #2. Also, convert the param list to xarray which removes the worry about list_head consistency when doing lockless lookup. The rest of the patches are doing some small related cleanup of things that poke me in the eye during the work. --- v1->v2: - a small bug was fixed in patch #2, the rest of the code stays the same so I left review/ack tags attached to them ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: add forgotten devlink instance lock assertion to ↵Jiri Pirko1-0/+2
devl_param_driverinit_value_set() Driver calling devl_param_driverinit_value_set() has to hold devlink instance lock while doing that. Put an assertion there. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: allow to call devl_param_driverinit_value_get() without holding ↵Jiri Pirko1-2/+11
instance lock If the driver maintains following basic sane behavior, the devl_param_driverinit_value_get() function could be called without holding instance lock: 1) Driver ensures a call to devl_param_driverinit_value_get() cannot race with registering/unregistering the parameter with the same parameter ID. 2) Driver ensures a call to devl_param_driverinit_value_get() cannot race with devl_param_driverinit_value_set() call with the same parameter ID. 3) Driver ensures a call to devl_param_driverinit_value_get() cannot race with reload operation. By the nature of params usage, these requirements should be trivially achievable. If the driver for some off reason is not able to comply, it has to take the devlink->lock while calling devl_param_driverinit_value_get(). Remove the lock assertion and add comment describing the locking requirements. This fixes a splat in mlx5 driver introduced by the commit referenced in the "Fixes" tag. Lore: https://lore.kernel.org/netdev/719de4f0-76ac-e8b9-38a9-167ae239efc7@amd.com/ Reported-by: Kim Phillips <kim.phillips@amd.com> Fixes: 075935f0ae0f ("devlink: protect devlink param list by instance lock") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: convert param list to xarrayJiri Pirko3-39/+39
Loose the linked list for params and use xarray instead. Note that this is required to be eventually possible to call devl_param_driverinit_value_get() without holding instance lock. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: use xa_for_each_start() helper in devlink_nl_cmd_port_get_dump_one()Jiri Pirko1-8/+2
As xarray has an iterator helper that allows to start from specified index, use this directly and avoid repeated iteration from 0. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: fix the name of value arg of devl_param_driverinit_value_get()Jiri Pirko2-4/+5
Probably due to copy-paste error, the name of the arg is "init_val" which is misleading, as the pointer is used to point to struct where to store the current value. Rename it to "val" and change the arg comment a bit on the way. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: make sure driver does not read updated driverinit param before reloadJiri Pirko4-4/+32
The driverinit param purpose is to serve the driver during init/reload time to provide a value, either default or set by user. Make sure that driver does not read value updated by user before the reload is performed. Hold the new value in a separate struct and switch it during reload. Note that this is required to be eventually possible to call devl_param_driverinit_value_get() without holding instance lock. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: don't use strcpy() to copy param valueJiri Pirko1-12/+3
No need to treat string params any different comparing to other types. Rely on the struct assign to copy the whole struct, including the string. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13nfp: ethtool: supplement nfp link modes supportedYu Xiao2-0/+15
Add support for the following modes to the nfp driver: NFP_MEDIA_10GBASE_LR NFP_MEDIA_25GBASE_LR NFP_MEDIA_25GBASE_ER These modes are supported by the hardware and, support for them was recently added to firmware. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13devlink: stop using NL_SET_ERR_MSG_MODJacob Keller2-70/+65
NL_SET_ERR_MSG_MOD inserts the KBUILD_MODNAME and a ':' before the actual extended error message. The devlink feature hasn't been able to be compiled as a module since commit f4b6bcc7002f ("net: devlink: turn devlink into a built-in"). Stop using NL_SET_ERR_MSG_MOD, and just use the base NL_SET_ERR_MSG. This aligns the extended error messages better with the NL_SET_ERR_MSG_ATTR messages as well. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-13rds: rds_rm_zerocopy_callback() correct order for list_add_tail()Pietro Borrello1-1/+1
rds_rm_zerocopy_callback() uses list_add_tail() with swapped arguments. This links the list head with the new entry, losing the references to the remaining part of the list. Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-11Merge branch '40GbE' of ↵Jakub Kicinski23-1591/+1424
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-09 (i40e) Jan removes i40e_status from the driver; replacing them with standard kernel error codes. Kees Cook replaces 0-length array with flexible array. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: net/i40e: Replace 0-length array with flexible array i40e: use ERR_PTR error print in i40e messages i40e: use int for i40e_status i40e: Remove string printing for i40e_status i40e: Remove unused i40e status codes ==================== Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-11Merge branch 's390-net-updates-2023-02-06'Jakub Kicinski10-170/+150
Alexandra Winter says: ==================== s390/net: updates 2023-02-06 Just maintenance patches, no functional changes. If you disagree with patch 4, we can leave it out. We prefer scnprintf, but no strong opinion. ==================== Link: https://lore.kernel.org/r/20230209110424.1707501-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-18 12:01:15 +0300