summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-21bcachefs: grab s_umount only if snapshottingSu Yue1-6/+5
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d237320e98 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exitSu Yue1-1/+1
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bios must be 512 byte alginedKent Overstreet1-0/+4
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: remove redundant variable tmpColin Ian King1-3/+1
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve trace_trans_restart_relockKent Overstreet5-24/+44
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Fix excess transaction restarts in __bchfs_fallocate()Kent Overstreet4-16/+35
drop_locks_do() should not be used in a fastpath without first trying the do in nonblocking mode - the unlock and relock will cause excessive transaction restarts and potentially livelocking with other threads that are contending for the same locks. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: extents_to_bp_stateKent Overstreet1-48/+41
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bkey_and_val_eq()Kent Overstreet1-3/+8
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Better journal tracepointsKent Overstreet2-60/+79
Factor out bch2_journal_bufs_to_text(), and use it in the journal_entry_full() tracepoint; when we can't get a journal reservation we need to know the outstanding journal entry sizes to know if the problem is due to excessive flushing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Print size of superblock with space allocatedKent Overstreet1-1/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Avoid flushing the journal in the discard pathKent Overstreet1-19/+41
When issuing discards, we may need to flush the journal if there's too many buckets that can't be discarded until a journal flush. But the heuristic was bad; we should be comparing the number of buckets that need to flushes against the number of free buckets, not the number of buckets we saw. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve move_extent tracepointKent Overstreet5-7/+48
Also print out the data_opts, so that we can see what specifically is being done to an extent. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add missing bch2_moving_ctxt_flush_all()Kent Overstreet1-0/+1
This fixes a bug with rebalance IOs getting stuck with reads completed, but writes never being issued. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Re-add move_extent_write tracepointKent Overstreet2-23/+20
It appears this was accidentally deleted at some point - also, do a bit of cleanup. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amountKent Overstreet1-2/+2
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code that uses it to be woken up for other reasons, and fixes a bug where rebalance wouldn't wake up when a scan was requested. This raises the possibility of spurious wakeups, but callers should always be able to handle that reasonably well. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add .val_to_text() for KEY_TYPE_cookieKent Overstreet1-0/+9
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Don't pass memcmp() as a pointerKent Overstreet1-2/+8
Some (buggy!) compilers have issues with this. Fixes: https://github.com/koverstreet/bcachefs/issues/625 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefsLinus Torvalds1-6/+6
Pull header fix from Kent Overstreet: "Just one small fixup for the RT build" * tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs: spinlock: Fix failing build for PREEMPT_RT
2024-01-21bcachefs: Reduce would_deadlock restartsKent Overstreet1-0/+7
We don't have to take locks in any particular ordering - we'll make forward progress just fine - but if we try to stick to an ordering, it can help to avoid excessive would_deadlock transaction restarts. This tweaks the reflink path to take extents btree locks in the right order. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_trans_account_disk_usage_change()Kent Overstreet3-29/+48
The disk space accounting rewrite is splitting out accounting for each replicas set - those are moving to btree keys, instead of percpu counters. This breaks bch2_trans_fs_usage_apply() up, splitting out the part we will still need. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_fs_usage_baseKent Overstreet7-47/+45
Split out base filesystem usage into its own type; prep work for breaking up bch2_trans_fs_usage_apply(). Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_prt_compression_type()Kent Overstreet5-6/+15
bounds checking helper, since compression types are extensible Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: helpers for printing data typesKent Overstreet14-64/+64
We need bounds checking since new versions may introduce new data types. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: BTREE_TRIGGER_ATOMICKent Overstreet8-30/+27
Add a new flag to be explicit about when we're running atomic triggers. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: drop to_text code for obsolete bps in alloc keysKent Overstreet1-18/+0
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: eytzinger_for_each() declares loop iterKent Overstreet2-3/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Don't log errors if BCH_WRITE_ALLOC_NOWAITKent Overstreet1-4/+5
Previously, we added logging in the write path to ensure that any unexpected errors getting reported to userspace have a log message; but BCH_WRITE_ALLOC_NOWAIT is a special case, it's used for promotes where errors are expected and not reported out to userspace - so we need to silence those. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: fix memleak in bch2_split_devsSu Yue1-3/+5
The pointer dev_name can be modified by strseq(), then causes the memleak: unreferenced object 0xffff9d08a2916c80 (size 32): comm "mount.bcachefs", pid 9090, jiffies 4295856224 (age 17.564s) hex dump (first 32 bytes): 2f 64 65 76 2f 6d 61 70 70 65 72 2f 74 65 73 74 /dev/mapper/test 2d 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -0.............. backtrace: [<00000000c5d3be7d>] __kmem_cache_alloc_node+0x1f3/0x2c0 [<0000000052215d26>] __kmalloc_node_track_caller+0x51/0x150 [<0000000069fea956>] kstrdup+0x32/0x60 [<000000000877fcf1>] bch2_split_devs+0x3f/0x150 [bcachefs] [<000000007ee93204>] bch2_mount+0xcb/0x640 [bcachefs] [<000000002dd1e04b>] legacy_get_tree+0x30/0x60 [<000000006afc31d3>] vfs_get_tree+0x28/0xf0 [<000000007b0c538e>] path_mount+0x475/0xb60 [<0000000092de5882>] __x64_sys_mount+0x105/0x140 [<0000000054fc05d8>] do_syscall_64+0x42/0xf0 [<00000000df584910>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Fix it by copy pointer dev_name at beginning and free the copied pointer at end. Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21Merge tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds19-257/+244
Pull smb client updates from Steve French: "Various smb client fixes, including multichannel and for SMB3.1.1 POSIX extensions: - debugging improvement (display start time for stats) - two reparse point handling fixes - various multichannel improvements and fixes - SMB3.1.1 POSIX extensions open/create parsing fix - retry (reconnect) improvement including new retrans mount parm, and handling of two additional return codes that need to be retried on - two minor cleanup patches and another to remove duplicate query info code - two documentation cleanup, and one reviewer email correction" * tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6: cifs: update iface_last_update on each query-and-update cifs: handle servers that still advertise multichannel after disabling cifs: new mount option called retrans cifs: reschedule periodic query for server interfaces smb: client: don't clobber ->i_rdev from cached reparse points smb: client: get rid of smb311_posix_query_path_info() smb: client: parse owner/group when creating reparse points smb: client: fix parsing of SMB3.1.1 POSIX create context cifs: update known bugs mentioned in kernel docs for cifs cifs: new nt status codes from MS-SMB2 cifs: pick channel for tcon and tdis cifs: open_cached_dir should not rely on primary channel smb3: minor documentation updates Update MAINTAINERS email address cifs: minor comment cleanup smb3: show beginning time for per share stats cifs: remove redundant variable tcon_exist
2024-01-21Merge tag 'dmaengine-fix-6.8-rc1' of ↵Linus Torvalds46-300/+1882
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - Loongson LS2X APB DMA controller - sf-pdma: mpfs-pdma support - Qualcomm X1E80100 GPI dma controller support Updates: - Xilinx XDMA updates to support interleaved DMA transfers - TI PSIL threads for AM62P and J722S and cfg register regions description - axi-dmac Improving the cyclic DMA transfers - Tegra Support dma-channel-mask property - Remaining platform remove callback returning void conversions Driver fixes for: - Xilinx xdma driver operator precedence and initialization fix - Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers - format-overflow warning fix for rz-dmac, sh usb dmac drivers - 'output may be truncated' fix for shdma, fsl-qdma and dw-edma drivers" * tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits) dmaengine: dw-edma: increase size of 'name' in debugfs code dmaengine: fsl-qdma: increase size of 'irq_name' dmaengine: shdma: increase size of 'dev_id' dmaengine: xilinx: xdma: Fix kernel-doc warnings dmaengine: usb-dmac: Avoid format-overflow warning dmaengine: sh: rz-dmac: Avoid format-overflow warning dmaengine: imx-sdma: fix Excess kernel-doc warnings dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr() dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma() dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma dmaengine: xilinx: xdma: Workaround truncation compilation error dmaengine: pl330: issue_pending waits until WFP state dmaengine: xilinx: xdma: Implement interleaved DMA transfers dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers dmaengine: xilinx: xdma: Add transfer error reporting dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr() dmaengine: xilinx: xdma: Rework xdma_terminate_all() dmaengine: xilinx: xdma: Ease dma_pool alignment requirements dmaengine: xilinx: xdma: Add necessary macro definitions dmaengine: xilinx: xdma: Get rid of unused code ...
2024-01-21Merge tag 'coccinelle-for-6.8' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "Updates to the device_attr_show semantic patch to reflect the new guidelines of the Linux kernel documentation. The problem was identified by Li Zhijian <lizhijian@fujitsu.com>, who proposed an initial fix" * tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: coccinelle: device_attr_show: simplify patch case coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst
2024-01-21media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)Aurelien Jarno1-5/+5
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10 driver. This improves the readability and more importantly, for the solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13): - the preprocessed size from 121 MiB to 4.5 MiB; - the build CPU time from 46.8 s to 1.6 s; - the build memory from 2786 MiB to 98MiB. In fine, this allows this relatively simple C file to be built on a 32-bit system. Reported-by: Jiri Slaby <jirislaby@gmail.com> Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/ Cc: <stable@vger.kernel.org> # v6.7+ Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: David Laight <David.Laight@ACULAB.COM> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-20coccinelle: device_attr_show: simplify patch caseJulia Lawall1-8/+3
Replacing the final expression argument by ... allows the format string to have multiple arguments. It also has the advantage of allowing the change to be recognized as a change in a single statement, thus avoiding adding unneeded braces. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
2024-01-20execve: open the executable file before doing anything elseLinus Torvalds1-34/+35
No point in allocating a new mm, counting arguments and environment variables etc if we're just going to return ENOENT. This patch does expose the fact that 'do_filp_open()' that execve() uses is still unnecessarily expensive in the failure case, because it allocates the 'struct file *' early, even if the path lookup (which is heavily optimized) fails. So that remains an unnecessary cost in the "no such executable" case, but it's a separate issue. Regardless, I do not want to do _both_ a filename_lookup() and a later do_filp_open() like the origin patch by Josh Triplett did in [1]. Reported-by: Josh Triplett <josh@joshtriplett.org> Cc: Kees Cook <keescook@chromium.org> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/lkml/5c7333ea4bec2fad1b47a8fa2db7c31e4ffc4f14.1663334978.git.josh@joshtriplett.org/ [1] Link: https://lore.kernel.org/lkml/202209161637.9EDAF6B18@keescook/ Link: https://lore.kernel.org/lkml/CAHk-=wgznerM-xs+x+krDfE7eVBiy_HOam35rbsFMMOwvYuEKQ@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAHk-=whf9qLO8ipps4QhmS0BkM8mtWJhvnuDSdtw5gFjhzvKNA@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-20Merge tag 'riscv-for-linus-6.8-mw4' of ↵Linus Torvalds71-213/+2676
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ...
2024-01-20Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-39/+103
Pull SCSI updates from James Bottomley: "Final round of fixes that came in too late to send in the first request. It's nine bug fixes and one version update (because of a bug fix) and one set of PCI ID additions. There's one bug fix in the core which is really a one liner (except that an additional sdev pointer was added for convenience) and the rest are in drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: core: Add TMF to tmr_list handling scsi: core: Kick the requeue list after inserting when flushing scsi: fnic: unlock on error path in fnic_queuecommand() scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode() scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings scsi: smartpqi: Bump driver version to 2.1.26-030 scsi: smartpqi: Fix logical volume rescan race condition scsi: smartpqi: Add new controller PCI IDs scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi() scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan() scsi: ufs: core: Simplify power management during async scan
2024-01-20Merge tag 'sh-for-v6.8-tag1' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "Since the large patch series to convert arch/sh to device tree support has not been finalized yet due to various maintainers still asking for changes to the series, this ended up being rather small consisting of just two fixes. The first patch by Geert Uytterhoeven addresses a build failure in the EcoVec platform code. And the second patch by Masahiro Yamada removes an unnecessary $(foreach ...) found in a Makefile of the vsyscall code. - Rename missed backlight field from fbdev to dev - Remove unnecessary $(foreach ...)" * tag 'sh-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: vsyscall: Remove unnecessary $(foreach ...) sh: ecovec24: Rename missed backlight field from fbdev to dev
2024-01-20Merge tag 'fbdev-for-6.8-rc1-2' of ↵Linus Torvalds1-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fix from Helge Deller: "There were various reports from people without any graphics output on the screen and it turns out one commit triggers the problem. - Revert 'firmware/sysfb: Clear screen_info state after consuming it'" * tag 'fbdev-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: Revert "firmware/sysfb: Clear screen_info state after consuming it"
2024-01-20Merge tag 'perf-tools-for-v6.8-1-2024-01-09' of ↵Linus Torvalds249-2141/+7843
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns processing patches, switching roles from perf-tools to perf-tools-next at each Linux release. Data profiling: - Associate samples that identify loads and stores with data structures. This uses events available on Intel, AMD and others and DWARF info: # To get memory access samples in kernel for 1 second (on Intel) $ perf mem record -a -K --ldlat=4 -- sleep 1 # Similar for the AMD (but it requires 6.3+ kernel for BPF filters) $ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1 Then, amongst several modes of post processing, one can do things like: $ perf report -s type,typeoff --hierarchy --group --stdio ... # # Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u' # Event count (approx.): 602758064 # # Overhead Data Type / Data Type Offset # ........................... ............................ # 26.09% 3.28% 0.00% long unsigned int 26.09% 3.28% 0.00% long unsigned int +0 (no field) 18.48% 0.73% 0.00% struct page 10.83% 0.02% 0.00% struct page +8 (lru.next) 3.90% 0.28% 0.00% struct page +0 (flags) 3.45% 0.06% 0.00% struct page +24 (mapping) 0.25% 0.28% 0.00% struct page +48 (_mapcount.counter) 0.02% 0.06% 0.00% struct page +32 (index) 0.02% 0.00% 0.00% struct page +52 (_refcount.counter) 0.02% 0.01% 0.00% struct page +56 (memcg_data) 0.00% 0.01% 0.00% struct page +16 (lru.prev) 15.37% 17.54% 0.00% (stack operation) 15.37% 17.54% 0.00% (stack operation) +0 (no field) 11.71% 50.27% 0.00% (unknown) 11.71% 50.27% 0.00% (unknown) +0 (no field) $ perf annotate --data-type ... Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples): ============================================================================ samples offset size field 13 0 640 struct cfs_rq { 2 0 16 struct load_weight load { 2 0 8 unsigned long weight; 0 8 4 u32 inv_weight; }; 0 16 8 unsigned long runnable_weight; 0 24 4 unsigned int nr_running; 1 28 4 unsigned int h_nr_running; ... $ perf annotate --data-type=page --group Annotate type: 'struct page' in [kernel.kallsyms] (480 samples): event[0] = cpu/mem-loads,ldlat=4/P event[1] = cpu/mem-stores/P event[2] = dummy:u =================================================================================== samples offset size field 447 33 0 0 64 struct page { 108 8 0 0 8 long unsigned int flags; 319 13 0 8 40 union { 319 13 0 8 40 struct { 236 2 0 8 16 union { 236 2 0 8 16 struct list_head lru { 236 1 0 8 8 struct list_head* next; 0 1 0 16 8 struct list_head* prev; }; 236 2 0 8 16 struct { 236 1 0 8 8 void* __filler; 0 1 0 16 4 unsigned int mlock_count; }; 236 2 0 8 16 struct list_head buddy_list { 236 1 0 8 8 struct list_head* next; 0 1 0 16 8 struct list_head* prev; }; 236 2 0 8 16 struct list_head pcp_list { 236 1 0 8 8 struct list_head* next; 0 1 0 16 8 struct list_head* prev; }; }; 82 4 0 24 8 struct address_space* mapping; 1 7 0 32 8 union { 1 7 0 32 8 long unsigned int index; 1 7 0 32 8 long unsigned int share; }; 0 0 0 40 8 long unsigned int private; }; This uses the existing annotate code, calling objdump to do the disassembly, with improvements to avoid having this take too long, but longer term a switch to a disassembler library, possibly reusing code in the kernel will be pursued. This is the initial implementation, please use it and report impressions and bugs. Make sure the kernel-debuginfo packages match the running kernel. The 'perf report' phase for non short perf.data files may take a while. There is a great article about it on LWN: https://lwn.net/Articles/955709/ - "Data-type profiling for perf" One last test I did while writing this text, on a AMD Ryzen 5950X, using a distro kernel, while doing a simple 'find /' on an otherwise idle system resulted in: # uname -r 6.6.9-100.fc38.x86_64 # perf -vv | grep BPF_ bpf: [ on ] # HAVE_LIBBPF_SUPPORT bpf_skeletons: [ on ] # HAVE_BPF_SKEL # rpm -qa | grep kernel-debuginfo kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64 kernel-debuginfo-6.6.9-100.fc38.x86_64 # # perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ] # # ls -la perf.data -rw-------. 1 root root 2346486 Jan 9 18:36 perf.data # perf evlist ibs_op// dummy:u # perf evlist -v ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1 dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # # perf report -s type,typeoff --hierarchy --group --stdio # Total Lost Samples: 0 # # Samples: 2K of events 'ibs_op//, dummy:u' # Event count (approx.): 1904553038 # # Overhead Data Type / Data Type Offset # ................... ............................ # 73.70% 0.00% (unknown) 73.70% 0.00% (unknown) +0 (no field) 3.01% 0.00% long unsigned int 3.00% 0.00% long unsigned int +0 (no field) 0.01% 0.00% long unsigned int +2 (no field) 2.73% 0.00% struct task_struct 1.71% 0.00% struct task_struct +52 (on_cpu) 0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked) 0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting) 0.14% 0.00% struct task_struct +2384 () 0.06% 0.00% struct task_struct +3096 (signal) 0.05% 0.00% struct task_struct +3616 (cgroups) 0.05% 0.00% struct task_struct +2344 (active_mm) 0.02% 0.00% struct task_struct +46 (flags) 0.02% 0.00% struct task_struct +2096 (migration_disabled) 0.01% 0.00% struct task_struct +24 (__state) 0.01% 0.00% struct task_struct +3956 (mm_cid_active) 0.01% 0.00% struct task_struct +1048 (cpus_ptr) 0.01% 0.00% struct task_struct +184 (se.group_node.next) 0.01% 0.00% struct task_struct +20 (thread_info.cpu) 0.00% 0.00% struct task_struct +104 (on_rq) 0.00% 0.00% struct task_struct +2456 (pid) 1.36% 0.00% struct module 0.59% 0.00% struct module +952 (kallsyms) 0.42% 0.00% struct module +0 (state) 0.23% 0.00% struct module +8 (list.next) 0.12% 0.00% struct module +216 (syms) 0.95% 0.00% struct inode 0.41% 0.00% struct inode +40 (i_sb) 0.22% 0.00% struct inode +0 (i_mode) 0.06% 0.00% struct inode +76 (i_rdev) 0.06% 0.00% struct inode +56 (i_security) <SNIP> perf top/report: - Don't ignore job control, allowing control+Z + bg to work. - Add s390 raw data interpretation for PAI (Processor Activity Instrumentation) counters. perf archive: - Add new option '--all' to pack perf.data with DSOs. - Add new option '--unpack' to expand tarballs. Initialization speedups: - Lazily initialize zstd streams to save memory when not using it. - Lazily allocate/size mmap event copy. - Lazy load kernel symbols in 'perf record'. - Be lazier in allocating lost samples buffer in 'perf record'. - Don't synthesize BPF events when disabled via the command line (perf record --no-bpf-event). Assorted improvements: - Show note on AMD systems that the :p, :pp, :ppp and :P are all the same, as IBS (Instruction Based Sampling) is used and it is inherentely precise, not having levels of precision like in Intel systems. - When 'cycles' isn't available, fall back to the "task-clock" event when not system wide, not to 'cpu-clock'. - Add --debug-file option to redirect debug output, e.g.: $ perf --debug-file /tmp/perf.log record -v true - Shrink 'struct map' to under one cacheline by avoiding function pointers for selecting if addresses are identity or DSO relative, and using just a byte for some boolean struct members. - Resolve the arch specific strerrno just once to use in perf_env__arch_strerrno(). - Reduce memory for recording PERF_RECORD_LOST_SAMPLES event. Assorted fixes: - Fix the default 'perf top' usage on Intel hybrid systems, now it starts with a browser showing the number of samples for Efficiency (cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This behaviour is similar on ARM64, with its respective set of big.LITTLE processors. - Fix segfault on build_mem_topology() error path. - Fix 'perf mem' error on hybrid related to availability of mem event in a PMU. - Fix missing reference count gets (map, maps) in the db-export code. - Avoid recursively taking env->bpf_progs.lock in the 'perf_env' code. - Use the newly introduced maps__for_each_map() to add missing locking around iteration of 'struct map' entries. - Parse NOTE segments until the build id is found, don't stop on the first one, ELF files may have several such NOTE segments. - Remove 'egrep' usage, its deprecated, use 'grep -E' instead. - Warn first about missing libelf, not libbpf, that depends on libelf. - Use alternative to 'find ... -printf' as this isn't supported in busybox. - Address python 3.6 DeprecationWarning for string scapes. - Fix memory leak in uniq() in libsubcmd. - Fix man page formatting for 'perf lock' - Fix some spelling mistakes. perf tests: - Fail shell tests that needs some symbol in perf itself if it is stripped. These tests check if a symbol is resolved, if some hot function is indeed detected by profiling, etc. - The 'perf test sigtrap' test is currently failing on PREEMPT_RT, skip it if sleeping spinlocks are detected (using BTF) and point to the mailing list discussion about it. This test is also being skipped on several architectures (powerpc, s390x, arm and aarch64) due to other pending issues with intruction breakpoints. - Adjust test case perf record offcpu profiling tests for s390. - Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest, addressing issues caused by the fallback from cycles to task-clock done in this release. - Fix mask for VG register in the user-regs test. - Use shellcheck on 'perf test' shell scripts automatically to make sure changes don't introduce things it flags as problematic. - Add option to change objdump binary and allow it to be set via 'perf config'. - Add basic 'perf script', 'perf list --json" and 'perf diff' tests. - Basic branch counter support. - Make DSO tests a suite rather than individual. - Remove atomics from test_loop to avoid test failures. - Fix call chain match on powerpc for the record+probe_libc_inet_pton test. - Improve Intel hybrid tests. Vendor event files (JSON): powerpc: - Update datasource event name to fix duplicate events on IBM's Power10. - Add PVN for HX-C2000 CPU with Power8 Architecture. Intel: - Alderlake/rocketlake metric fixes. - Update emeraldrapids events to v1.02. - Update icelakex events to v1.23. - Update sapphirerapids events to v1.17. - Add skx, clx, icx and spr upi bandwidth metric. AMD: - Add Zen 4 memory controller events. RISC-V: - Add StarFive Dubhe-80 and Dubhe-90 JSON files. https://www.starfivetech.com/en/site/cpu-u - Add T-HEAD C9xx JSON file. https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md ARM64: - Remove UTF-8 characters from cmn.json, that were causing build failure in some distros. - Add core PMU events and metrics for Ampere One X. - Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT libperf: - Rename several perf_cpu_map constructor names to clarify what they really do. - Ditto for some other methods, coping with some issues in their semantics, like perf_cpu_map__empty() -> perf_cpu_map__has_any_cpu_or_is_empty(). - Document perf_cpu_map__nr()'s behavior perf stat: - Exit if parse groups fails. - Combine the -A/--no-aggr and --no-merge options. - Fix help message for --metric-no-threshold option. Hardware tracing: ARM64 CoreSight: - Bump minimum OpenCSD version to ensure a bugfix is present. - Add 'T' itrace option for timestamp trace - Set start vm addr of exectable file to 0 and don't ignore first sample on the arm-cs-trace-disasm.py 'perf script'" * tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits) MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm perf db-export: Fix missing reference count get in call_path_from_sample() perf tests: Add perf script test libsubcmd: Fix memory leak in uniq() perf TUI: Don't ignore job control perf vendor events intel: Update sapphirerapids events to v1.17 perf vendor events intel: Update icelakex events to v1.23 perf vendor events intel: Update emeraldrapids events to v1.02 perf vendor events intel: Alderlake/rocketlake metric fixes perf x86 test: Add hybrid test for conflicting legacy/sysfs event perf x86 test: Update hybrid expectations perf vendor events amd: Add Zen 4 memory controller events perf stat: Fix hard coded LL miss units perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event perf env: Avoid recursively taking env->bpf_progs.lock perf annotate: Add --insn-stat option for debugging perf annotate: Add --type-stat option for debugging perf annotate: Support event group display perf annotate: Add --data-type option ...
2024-01-20Merge tag 'strlcpy-removal-v6.8-rc1' of ↵Linus Torvalds7-82/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull strlcpy removal from Kees Cook: "As promised, this is 'part 2' of the hardening tree, late in -rc1 now that all the other trees with strlcpy() removals have landed. One new user appeared (in bcachefs) but was a trivial refactor. The kernel is now free of the strlcpy() API! - Remove of the final (very recent) user of strlcpy() (in bcachefs) - Remove the strlcpy() API. Long live strscpy()" * tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: string: Remove strlcpy() bcachefs: Replace strlcpy() with strscpy()
2024-01-20Merge tag 'arm64-fixes' of ↵Linus Torvalds11-49/+83
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I think the main one is fixing the dynamic SCS patching when full LTO is enabled (clang was silently getting this horribly wrong), but it's all good stuff. Rob just pointed out that the fix to the workaround for erratum #2966298 might not be necessary, but in the worst case it's harmless and since the official description leaves a little to be desired here, I've left it in. Summary: - Fix shadow call stack patching with LTO=full - Fix voluntary preemption of the FPSIMD registers from assembly code - Fix workaround for A520 CPU erratum #2966298 and extend to A510 - Fix SME issues that resulted in corruption of the register state - Minor fixes (missing includes, formatting)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix silcon-errata.rst formatting arm64/sme: Always exit sme_alloc() early with existing storage arm64/fpsimd: Remove spurious check for SVE support arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace arm64: entry: simplify kernel_exit logic arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD arm64: errata: Add Cortex-A510 speculative unprivileged load workaround arm64: Rename ARM64_WORKAROUND_2966298 arm64: fpsimd: Bring cond_yield asm macro in line with new rules arm64: scs: Work around full LTO issue with dynamic SCS arm64: irq: include <linux/cpumask.h>
2024-01-20Merge tag 'loongarch-6.8' of ↵Linus Torvalds34-102/+1735
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Raise minimum clang version to 18.0.0 - Enable initial Rust support for LoongArch - Add built-in dtb support for LoongArch - Use generic interface to support crashkernel=X,[high,low] - Some bug fixes and other small changes - Update the default config file. * tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) MAINTAINERS: Add BPF JIT for LOONGARCH entry LoongArch: Update Loongson-3 default config file LoongArch: BPF: Prevent out-of-bounds memory access LoongArch: BPF: Support 64-bit pointers to kfuncs LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch: Fix and simplify fcsr initialization on execve() LoongArch: Let cores_io_master cover the largest NR_CPUS LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch: Add a missing call to efi_esrt_init() LoongArch: Parsing CPU-related information from DTS LoongArch: dts: DeviceTree for Loongson-2K2000 LoongArch: dts: DeviceTree for Loongson-2K1000 LoongArch: dts: DeviceTree for Loongson-2K0500 LoongArch: Allow device trees be built into the kernel dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names dt-bindings: loongarch: Add Loongson SoC boards compatibles dt-bindings: loongarch: Add CPU bindings for LoongArch LoongArch: Enable initial Rust support ...
2024-01-20Revert "firmware/sysfb: Clear screen_info state after consuming it"Helge Deller1-13/+1
This reverts commit df67699c9cb0ceb70f6cc60630ca938c06773eda. Jens Axboe reported a regression that his machine is failing to show a console, or in fact anything, on current -git. There's no output and no console after: Loading Linux 6.7.0+ ... Loading initial ramdisk ... Signed-off-by: Helge Deller <deller@gmx.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jens Axboe <axboe@kernel.dk>
2024-01-20Merge tag 'devicetree-for-6.8-2' of ↵Linus Torvalds10-49/+30
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree header detangling from Rob Herring: "Remove the circular including of of_device.h and of_platform.h along with all of their implicit includes. This is the culmination of several kernel cycles worth of fixing implicit DT includes throughout the tree" * tag 'devicetree-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Stop circularly including of_device.h and of_platform.h clk: qcom: gcc-x1e80100: Replace of_device.h with explicit includes thermal: loongson2: Replace of_device.h with explicit includes net: can: Use device_get_match_data() sparc: Use device_get_match_data()
2024-01-19coccinelle: device_attr_show: Adapt to the latest ↵Li Zhijian1-9/+13
Documentation/filesystems/sysfs.rst Adapt description, warning message and MODE=patch according to the latest Documentation/filesystems/sysfs.rst: > show() should only use sysfs_emit() or sysfs_emit_at() when formatting > the value to be returned to user space. After this patch: When MODE=report, $ make coccicheck COCCI=scripts/coccinelle/api/device_attr_show.cocci M=drivers/hid/hid-picolcd_core.c MODE=report <...snip...> drivers/hid/hid-picolcd_core.c:304:8-16: WARNING: please use sysfs_emit or sysfs_emit_at drivers/hid/hid-picolcd_core.c:259:9-17: WARNING: please use sysfs_emit or sysfs_emit_at When MODE=patch, $ make coccicheck COCCI=scripts/coccinelle/api/device_attr_show.cocci M=drivers/hid/hid-picolcd_core.c MODE=patch <...snip...> diff -u -p a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c --- a/drivers/hid/hid-picolcd_core.c +++ b/drivers/hid/hid-picolcd_core.c @@ -255,10 +255,12 @@ static ssize_t picolcd_operation_mode_sh { struct picolcd_data *data = dev_get_drvdata(dev); - if (data->status & PICOLCD_BOOTLOADER) - return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); - else - return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); + if (data->status & PICOLCD_BOOTLOADER) { + return sysfs_emit(buf, "[bootloader] lcd\n"); + } + else { + return sysfs_emit(buf, "bootloader [lcd]\n"); + } } static ssize_t picolcd_operation_mode_store(struct device *dev, @@ -301,7 +303,7 @@ static ssize_t picolcd_operation_mode_de { struct picolcd_data *data = dev_get_drvdata(dev); - return snprintf(buf, PAGE_SIZE, "hello world\n"); + return sysfs_emit(buf, "hello world\n"); } static ssize_t picolcd_operation_mode_delay_store(struct device *dev, CC: Julia Lawall <Julia.Lawall@inria.fr> CC: Nicolas Palix <nicolas.palix@imag.fr> CC: cocci@inria.fr Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
2024-01-19Merge tag 'spi-fix-v6.8-merge-window' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One simple fix for the device unbind path in the Coldfire driver. A conversion to use a combined get/enable helper missed removing a disable" * tag 'spi-fix-v6.8-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: coldfire-qspi: Remove an erroneous clk_disable_unprepare() from the remove function
2024-01-19Merge tag 'sound-fix-6.8-rc1' of ↵Linus Torvalds22-149/+209
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - Lots of ASoC SOF fixes and related reworks - ASoC TAS codec fixes including DT updates - A few HD-audio quirks and regression fixes - Minor fixes for aloop, oxygen and scarlett2 mixer" * tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5 ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx ASoC: SOF: ipc4-loader: remove the CPC check warnings ASoC: SOF: ipc4-pcm: remove log message for LLP ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get ALSA: scarlett2: Fix yet more -Wformat-truncation warnings ALSA: hda: Properly setup HDMI stream ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm() ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage" ALSA: oxygen: Fix right channel of capture volume mixer ALSA: aloop: Introduce a function to get if access is interleaved mode ASoC: mediatek: sof-common: Add NULL check for normal_link string ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow ASoC: codecs: rtq9128: Fix PM_RUNTIME usage ASoC: tas2781: Add tas2563 into driver ...
2024-01-19string: Remove strlcpy()Kees Cook6-80/+1
With all the users of strlcpy() removed[1] from the kernel, remove the API, self-tests, and other references. Leave mentions in Documentation (about its deprecation), and in checkpatch.pl (to help migrate host-only tools/ usage). Long live strscpy(). Link: https://github.com/KSPP/linux/issues/89 [1] Cc: Azeem Shaikh <azeemshaikh38@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: linux-hardening@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2024-01-19Merge tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds85-463/+692
Pull more drm fixes from Dave Airlie: "This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix thrown in. The amdgpu ones are just the usual couple of weeks of fixes. The xe ones are bunch of cleanups for the new xe driver, the fix you put in on the merge commit and the kconfig fix that was hiding the problem from me. amdgpu: - DSC fixes - DC resource pool fixes - OTG fix - DML2 fixes - Aux fix - GFX10 RLC firmware handling fix - Revert a broken workaround for SMU 13.0.2 - DC writeback fix - Enable gfxoff when ROCm apps are active on gfx11 with the proper FW version amdkfd: - Fix dma-buf exports using GEM handles nouveau: - fix a unneeded WARN_ON triggering xe: - Fix for definition of wakeref_t - Fix for an error code aliasing - Fix for VM_UNBIND_ALL in the case there are no bound VMAs - Fixes for a number of __iomem address space mismatches reported by sparse - Fixes for the assignment of exec_queue priority - A Fix for skip_guc_pc not taking effect - Workaround for a build problem on GCC 11 - A couple of fixes for error paths - Fix a Flat CCS compression metadata copy issue - Fix a misplace array bounds checking - Don't have display support depend on EXPERT (as discussed on IRC)" * tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits) nouveau/vmm: don't set addr on the fail path to avoid warning drm/amdgpu: Enable GFXOFF for Compute on GFX11 drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests. drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2" drm/amdkfd: init drm_client with funcs hook drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state() drm/amdgpu: Fix the null pointer when load rlc firmware drm/amd/display: Align the returned error code with legacy DP drm/amd/display: Fix DML2 watermark calculation drm/amd/display: Clear OPTC mem select on disable drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A drm/amd/display: Add logging resource checks drm/amd/display: Init link enc resources in dc_state only if res_pool presents drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()' drm/amd/display: Avoid enum conversion warning drm/amd/pm: Fix smuv13.0.6 current clock reporting drm/amd/pm: Add error log for smu v13.0.6 reset drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()' drm/amdgpu: drop exp hw support check for GC 9.4.3 drm/amdgpu: move debug options init prior to amdgpu device init ...
2024-01-19Merge tag 'for-v6.8-v2' of ↵Linus Torvalds29-342/+614
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New features: - bq24190: Add support for BQ24296 charger Cleanups: - all reset drivers: Stop using module_platform_driver_probe() - gpio-restart: use devm_register_sys_off_handler - pwr-mlxbf: support graceful reboot - cw2015: correct time_to_empty units - qcom-battmgr: Fix driver initialization sequence - bq27xxx: Start/Stop delayed work in suspend/resume - minor cleanups and fixes" * tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits) power: supply: bq24190_charger: Fix "initializer element is not constant" error power: supply: bq24190_charger: Add support for BQ24296 dt-bindings: power: supply: bq24190: Add BQ24296 compatible dt-bindings: power: reset: xilinx: Rename node names in examples power: supply: qcom_battmgr: Register the power supplies after PDR is up dt-bindings: power: reset: qcom-pon: fix inconsistent example power: supply: Fix null pointer dereference in smb2_probe power: reset: at91: Drop '__init' from at91_wakeup_status() power: supply: Use multiple MODULE_AUTHOR statements power: supply: Fix indentation and some other warnings power: reset: gpio-restart: Use devm_register_sys_off_handler() power: supply: bq256xx: fix some problem in bq256xx_hw_init power: supply: cw2015: correct time_to_empty units in sysfs power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void power: reset: at91-reset: Convert to platform remove callback returning void power: reset: tps65086-restart: Convert to platform remove callback returning void power: reset: syscon-poweroff: Convert to platform remove callback returning void power: reset: rmobile-reset: Convert to platform remove callback returning void power: reset: restart-poweroff: Convert to platform remove callback returning void power: reset: regulator-poweroff: Convert to platform remove callback returning void ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 02:57:09 +0300