Age | Commit message (Collapse) | Author | Files | Lines |
|
Default samples/pktgen scripts send 60 byte packets as hardware adds
4-bytes FCS checksum, which fulfils minimum Ethernet 64 bytes frame
size.
XDP layer will not necessary have access to the 4-bytes FCS checksum.
This leads to bpf_xdp_load_bytes() failing as it tries to copy 64-bytes
from an XDP packet that only have 60-bytes available.
Fixes: 772251742262 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/168545704139.2996228.2516528552939485216.stgit@firesoul
|
|
bpfilter_umh_cleanup() is the same function as umd_cleanup_helper().
Drop the redundant function.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230526112104.1044686-1-jarkko@kernel.org
|
|
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated [1]. This is not
the case here, however, in an effort to remove strlcpy() completely [2],
lets replace strlcpy() here with strscpy(). No return values were used,
so a direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/bpf/20230530155659.309657-1-azeemshaikh38@gmail.com
|
|
Use struct_size() instead of hand writing it. This is less verbose and
more informative.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230531043251.989312-1-suhui@nfschina.com
|
|
Add two selftests where map creation key/value type_id's are
decl_tags. Without previous patch, kernel warnings will
appear similar to the one in the previous patch. With the previous
patch, both kernel warnings are silenced.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230530205034.266643-1-yhs@fb.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/
Reported-by: syzbot+958967f249155967d42a@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230530205029.264910-1-yhs@fb.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Check whether first PCI read returns 0xffffffff. Currently, if this is
the case, the user sees the following misleading message:
unknown chip XID fcf, contact r8169 maintainers (see MAINTAINERS file)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/75b54d23-fefe-2bf4-7e80-c9d3bc91af11@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no gpiod_export() and gpiod_unexport() looks pretty much stray.
The gpiod_export() and gpiod_unexport() shouldn't be used in the code,
GPIO sysfs is deprecated. That said, simply drop the stray call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230528142531.38602-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use vzalloc() instead of hand writing it with vmalloc()+memset().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/93b010824d9d92376e8d49b9eb396a0fa0c0ac80.1685216322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Parthiban Veerasooran says:
====================
microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
This patch series contain the below updates,
- Fixes on the Microchip LAN8670/1/2 10BASE-T1S PHYs support in the
net/phy/microchip_t1s.c driver.
- Adds support for the Microchip LAN8650/1 Rev.B0 10BASE-T1S Internal
PHYs in the net/phy/microchip_t1s.c driver.
====================
Link: https://lore.kernel.org/r/20230526152348.70781-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the Microchip LAN865x Rev.B0 10BASE-T1S Internal PHYs
(LAN8650/1). The LAN865x combines a Media Access Controller (MAC) and an
internal 10BASE-T1S Ethernet PHY to access 10BASE‑T1S networks. As
LAN867X and LAN865X are using the same function for the read_status,
rename the function as lan86xx_read_status.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By default, except Reset Complete interrupt in the Interrupt Mask 2
Register all other interrupts are disabled/masked. As Reset Complete
status is already handled, it doesn't make sense to disable it.
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Tested-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As per the datasheet DS-LAN8670-1-2-60001573C.pdf, the Reset Complete
status bit in the STS2 register has to be checked before proceeding to
the initial configuration. Reading STS2 register will also clear the
Reset Complete interrupt which is non-maskable.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Tested-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As per AN1699, the initial configuration in the driver applies to LAN867x
Rev.B1 hardware revision. 0x0007C160 (Rev.A0) and 0x0007C161 (Rev.B0)
never released to production and hence they don't need to be supported.
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace read-modify-write code in the lan867x_config_init function to
avoid handling data type mismatch and to simplify the code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove LAN867X from the driver description as this driver is common for
all the Microchip 10BASE-T1S PHYs.
Reviewed-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Oleksij Rempel says:
====================
Microchip DSA Driver Improvements
changes v2:
- set .max_register = U8_MAX, it should be more readable
- clarify in the RMW error handling patch, logging behavior
expectation.
I'd like to share a set of patches for the Microchip DSA driver. These
patches were chosen from a bigger set because they are simpler and
should be easier to review. The goal is to make the code easier to read,
get rid of unused code, and handle errors better.
====================
Link: https://lore.kernel.org/r/20230526073445.668430-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This update introduces specific register access boundaries for the
KSZ8873 and KSZ8863 chips within the DSA Microchip driver. The outlined
ranges target global control registers, port registers, and advanced
control registers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
validation
This patch prepares the ksz8863_smi part of ksz8 driver to utilize the
regmap register access validation feature.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only place where this variable would be set to false is the
ksz8_config_cpu_port() function. But it is done in a bogus way:
for (i = 0; i < dev->phy_port_cnt; i++) {
if (i == dev->phy_port_cnt) <--- will be never executed.
break;
p->on = 1;
So, we never have a situation where p->on = 0. In this case, we can just
remove it.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.
In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch refines the error handling mechanism for 8-bit register
read-modify-write operations. In case of a failure, it now logs an error
message detailing the problematic offset. This enhancement aids in
debugging by providing more precise information when these operations
encounter issues.
Furthermore, the ksz_prmw8() function has been updated to return error
values rather than void, enabling calling functions to appropriately
respond to errors.
Additionally, in case of an error that affects both the current and
future accesses, the PHY driver will log the errors consistently, akin
to the existing behavior in all ksz_read*/ksz_write* helpers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Donald Hunter says:
====================
netlink: specs: add ynl spec for ovs_flow
Add a ynl specification for ovs_flow. The spec is sufficient to dump ovs
flows but some attrs have been left as binary blobs because ynl doesn't
support C arrays in struct definitions yet.
Patches 1-3 add features for genetlink-legacy specs
Patch 4 is the ovs_flow netlink spec
====================
Link: https://lore.kernel.org/r/20230527133107.68161-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a ynl specification for ovs_flow. This spec is sufficient to dump ovs
flows. Some attrs are left as binary blobs because ynl doesn't support C
arrays in struct definitions yet.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support decoding scalars as enums in struct members for genetlink-legacy
specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This eliminates the need for e.g. --json '{"dp-ifindex":0}' which is not
too big a deal for ovs but will get tiresome for fixed header structs that
have many members.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make it possible to document the meaning of struct member attributes in
genetlink-legacy specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make some minor spelling corrections in comments.
Found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230526-devlink-spelling-v1-1-9a3e36cdebc8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "len" variable needs to be signed for the error handling to work
correctly.
Fixes: 2e910b95329c ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/366861a7-87c8-4bbf-9101-69dd41021d07@kili.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than using put_device(&mdiodev->dev), use the proper interface
provided to dispose of the mdiodev - that being mdio_device_free().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/E1q2VsB-008QlZ-El@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: pcs: add helpers to xpcs and lynx to manage mdiodev
This morning, we have had two instances where the destruction of the
MDIO device associated with XPCS and Lynx has been wrong. Rather than
allowing this pattern of errors to continue, let's make it easier for
driver authors to get this right by adding a helper.
The changes are essentially:
1. Add two new mdio device helpers to manage the underlying struct
device reference count. Note that the existing mdio_device_free()
doesn't actually free anything, it merely puts the reference count.
2. Make the existing _create() and _destroy() PCS driver methods
increment and decrement this refcount using these helpers. This
results in no overall change, although drivers may hang on to
the mdio device for a few cycles longer.
3. Add _create_mdiodev() which creates the mdio device before calling
the existing _create() method. Once the _create() method has
returned, we put the reference count on the mdio device.
If _create() was successful, then the reference count taken there
will "hold" the mdio device for the lifetime of the PCS (in other
words, until _destroy() is called.) However, if _create() failed,
then dropping the refcount at this point will free the mdio device.
This is the exact behaviour we desire.
4. Convert users that create a mdio device and then call the PCS's
_create() method over to the new _create_mdiodev() method, and
simplify the cleanup.
We also have DPAA2 and fmem_memac that look up their PCS rather than
creating it. These could also drop their reference count on the MDIO
device immediately after calling lynx_pcs_create(), which would then
mean we wouldn't need lynx_get_mdio_device() and the associated
complexity to put the device in dpaa2_pcs_destroy() and pcs_put().
Note that DPAA2 bypasses the mdio device's abstractions by calling
put_device() directly.
====================
Link: https://lore.kernel.org/r/ZHCGZ8IgAAwr8bla@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add lynx_pcs_create_mdiodev() to simplify the creation of the mdio
device associated with lynx PCS. In order to allow lynx_pcs_destroy()
to clean this up, we need to arrange for lynx_pcs_create() to take a
refcount on the mdiodev, and lynx_pcs_destroy() to put it.
Adding the refcounting to lynx_pcs_create()..lynx_pcs_destroy() will
be transparent to existing users of these interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new xpcs_create_mdiodev() creator, which simplifies the
creation and destruction of the mdio device associated with xpcs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add xpcs_create_mdiodev() to simplify the creation of the mdio device
associated with the XPCS. In order to allow xpcs_destroy() to clean
this up, we need to arrange for xpcs_create() to take a refcount on
the mdiodev, and xpcs_destroy() to put it.
Adding the refcounting to xpcs_create()..xpcs_destroy() will be
transparent to existing users of these interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add two new operations for a mdio device to manage the refcount on the
underlying struct device. This will be used by mdio PCS drivers to
simplify the creation and destruction handling, making it easier for
users to get it correct.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to have our interrupt descriptor fully setup and in particular
the action, ensure that we register a full fledged interrupt handler.
This also allow us to set the interrupt polarity and flow through the
same call.
This is specifically necessary for kernel/irq/pm.c::suspend_device_irq
to set the interrupt descriptor to the IRQD_WAKEUP_ARMED state and
enable the interrupt for wake-up since it was still in a disabled state.
Without an interrupt descriptor we would have ran into cases where the
wake-up interrupt is not capable of waking up the system, specifically
if we resumed the system ACPI S5 using the Ethernet PHY. In that case
the Ethernet PHY interrupt would be pending by the time the kernel
booted, which it would acknowledge but then we could never use it as
a wake-up source again.
Fixes: 8baddaa9d4ba ("net: phy: broadcom: Add support for Wake-on-LAN")
Suggested-by: Doug Berger <doug.berger@broadcom.com>
Debugged-by: Doug Berger <doug.berger@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently TCP_SYNQ_INTERVAL is defined but never used.
According to "git log -S TCP_SYNQ_INTERVAL net-next/main" it seems
the last references to TCP_SYNQ_INTERVAL were removed by 2015
commit fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit c4c84f6fb2c4 ("bpf: drop unnecessary bpf_capable() check in
BPF_MAP_FREEZE command") moved the permissions check outside of the
freeze_mutex in the map_freeze() handler. The error paths still jumps
to the err_put which tries to unlock the freeze_mutex even though it
was not locked in the first place. Fix it.
Fixes: c4c84f6fb2c4 ("bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command")
Reported-by: syzbot+8982e75c2878b9ffeac5@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Improve bpf_map__reuse_fd() logic and ensure that dup'ed map FD is
"good" (>= 3) and has O_CLOEXEC flags. Use fcntl(F_DUPFD_CLOEXEC) for
that, similarly to ensure_good_fd() helper we already use in low-level
APIs that work with bpf() syscall.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-2-andrii@kernel.org
|
|
Make sure that libbpf code always gets FD with O_CLOEXEC flag set,
regardless if file is open through open() or fopen(). For the latter
this means to add "e" to mode string, which is supported since pretty
ancient glibc v2.7.
Also drop the outdated TODO comment in usdt.c, which was already completed.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-1-andrii@kernel.org
|
|
Russell King says:
====================
net: dsa: mv88e6xxx: prepare for phylink_pcs conversion
These two patches provide some preparation for converting the mv88e6xxx
DSA driver to use phylink_pcs rather than bolting the serdes bits into
the MAC calls.
In order to correctly drive mv88e6xxx hardware when the PCS code is
split, we need to force the link down while changing the configuration
of a port. This is provided for via the mac_prepare() and mac_finish()
methods, but DSA does not forward these on to DSA drivers.
Patch 1 adds support to the DSA core to forward these two methods to
DSA drivers, and patch 2 moves the code from mv88e6xxx_mac_config()
into the respective methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.
Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When fewer VIs are allocated than what is allowed we can readjust
the channels by calling efx_mcdi_alloc_vis() again.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d13e2e ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").
However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.
The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls. This is can be prevented by properly prioritising the
tasks within the system.
Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.
Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|