summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-26mfd: Fix twl6030 irq definitionsGraeme Gregory2-2/+3
The charger fault IRQs from the twl will in future patches be handled by a seperate IRQ handler in the charger driver than the general charger IRQ. Give them different IRQ numbers now to allow the charger driver to be merged in the future. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add phoenix lite (twl6025) support to twl6030Graeme Gregory2-37/+187
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the same feature set of twl6030 but with small changes. The codec block has also been removed. It also has a new charger block and new features in its ADC block. VUSB handling also differs. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to use constraint name in 88pm860x regulator driverHaojian Zhuang2-39/+21
Avoid to use constraint name in regulator driver. So use regulator id is used instead in platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove checking on max8925 regulator[0]Haojian Zhuang1-1/+1
Since regulator[0] is always checking in mfd driver, it results in registration failure without regulator[0]. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove unused parameter from 88pm860x APIHaojian Zhuang1-18/+10
i2c_client parameter isn't used in some functions. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to allocate 88pm860x static platform dataHaojian Zhuang1-29/+16
Maybe multiple PMIC devices are installed into one board. Static variable can only make driver logic mess. So remove these variable, and use platform data from platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add rtc support to 88pm860xHaojian Zhuang5-0/+473
Enable rtc function in 88pm860x PMIC. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26regulator: Enable max8925 i2c sequence for controlHaojian Zhuang1-3/+8
Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't be enabled or disabled via accessing i2c bus. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26power_supply: Use max8925 platform_data from cellHaojian Zhuang1-8/+2
Avoid to get platform_data from parent device. Get it from mfd cell device instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix tps6586x GPIO value settingVincent Palatin1-2/+2
In the current code, every time we set a TPS6586x GPIO pin, the tps6586x_gpio_set function is resetting all other GPIO pins. We need to update the right GPIOxOUT bit of the GPIOSET2 register instead of overriding the full value. Tested by setting sequentially GPIO2 and GPIO3 and verifying the pins voltage. Change-Id: I560edde146c5425cce37432c4ee91569eea5adcf Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystemAbhijeet Dharmapurikar1-0/+2
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add pm8xxx irq supportAbhijeet Dharmapurikar7-0/+509
Add support for the irq controller in Qualcomm 8xxx pmic. The 8xxx interrupt controller provides control for gpio and mpp configured as interrupts in addition to other subdevice interrupts. The interrupt controller also provides a way to read the real time status of an interrupt. This real time status is the only way one can get the input values of gpio and mpp lines. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add Qualcomm PMIC 8921 core driverAbhijeet Dharmapurikar5-0/+275
Add support for the Qualcomm PM8921 PMIC chip. The core driver will communicate with the PMIC chip via the MSM SSBI bus. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Group NXP PCF50633* drivers togetherAxel Lin1-14/+14
PCF50633_ADC and PCF50633_GPIO depends on MFD_PCF50633. Thus group NXP PCF50633* drivers together. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Group TPSxxxxx power management chips togetherAxel Lin1-14/+14
Group TPSxxxxx power management chips together and sort in alphabetical order. This change makes it easier for users to find config options. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: TWL5030 version checking in twl-coreLesly A M2-1/+78
Added API to get the TWL5030 Si version from the IDCODE register. It is used for enabling the workaround for TWL erratum 27. Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Modifying the twl4030-power macro name Main_Ref to all capsLesly A M3-3/+3
Modifying the macro name Main_Ref to all caps(MAIN_REF). Suggested by Nishanth Menon <nm@ti.com> Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Correct the twl4030-power warning print during script loadingLesly A M1-1/+1
Correcting the if condition check for printing the warning, if wakeup script is not updated before updating the sleep script. Since the flag 'order' is set to '1' while updating the wakeup script for P1P2, the condition checking for printing the warning should be if(!order) (ie: print the warning if wakeup script is not updated before updating the sleep script) Signed-off-by: Lesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix build warning on 88pm860xHaojian Zhuang1-14/+14
WARNING: vmlinux.o(.devinit.text+0x6c4): Section mismatch in reference from the function device_onkey_init() to the (unknown reference) .init.data:(unknown) The function __devinit device_onkey_init() references a (unknown reference) __initdata (unknown). If (unknown) is only used by device_onkey_init then annotate (unknown) with a matching annotation. It's caused by using __initdata on mfd cell resources. Replace __initdata with __devinitdata. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix wl1273 warningWanlong Gao1-1/+0
Remove the unused variable "u16 val" of wl1273-core.c. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Continue with IRQ setup even if we don't have PMIC main IRQMark Brown1-13/+14
The fact that we can't actually raise any interrupts doesn't stop us setting up the IRQs we're exporting. While this isn't actually going to do anything it allows us to proceed further through device setup during board bringup and avoids issues with the MFD core not letting us suppress the configuration of IRQ resources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide platform data for WM831x GPIO configurationMark Brown2-1/+16
Allow the GPIO mode of WM831x devices to be configured using platform data. Users may provide a table of GPIO register values in gpio_defaults[]. In order to allow 0 to be set explicitly out of range values are accepted and masked off, with a WM831X_GPIO_CONFIGURE define provided to set an out of range value. This can be used to configure higher numbered GPIOs or override values set in OTP for GPIOs configured using OTP. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove compatibility interface for WM831x specific IRQ APIMark Brown1-26/+0
The last user was removed in the merge window. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove mfd_dataSamuel Ortiz1-21/+0
Cell pointers are passed through device->mfd_cell and platform data is passed through the MFD cell platform_data pointer. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26regulator: Use device platform_data to retrieve db8500 platform bitsSamuel Ortiz1-2/+2
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for wm8400 cells platform bitsSamuel Ortiz2-2/+3
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for davinci cells platform bitsSamuel Ortiz3-5/+6
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for 88pm860x cells platform bitsSamuel Ortiz4-24/+15
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for tps6105x cells platform bitsSamuel Ortiz2-3/+4
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for twl4030 codec cells platform bitsSamuel Ortiz3-8/+7
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for janz cells platform bitsSamuel Ortiz3-5/+4
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for mc13xxx cells platform bitsSamuel Ortiz4-15/+18
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for rdc321x cells platform bitsSamuel Ortiz3-6/+6
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for timberdale cells platform bitsSamuel Ortiz9-44/+64
With the addition of a device platform mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mtd: Use platform_data to retrieve tmio_nand platform bitsSamuel Ortiz3-3/+6
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data(). Cc: Ian Molton <spyro@f2s.com> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26fb: Use platform_data to retrieve tmiofb platform bitsSamuel Ortiz2-8/+7
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data(). Cc: Ian Molton <spyro@f2s.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for wl1273 cells platform bitsSamuel Ortiz3-5/+6
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Pass htc-pasic3 led platform data through the cell platform_dataSamuel Ortiz1-0/+2
Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26w1: Use device platform_data to retrieve ds1wm platform bitsSamuel Ortiz3-4/+14
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data(). Cc: Matt Reimer <mreimer@vpop.net> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mmc: Use device platform_data to retrieve tmio_mmc platform bitsSamuel Ortiz5-5/+9
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data() Cc: Ian Molton <spyro@f2s.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for ab3100 cells platform bitsSamuel Ortiz2-4/+5
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for ab3550 cells platform bitsSamuel Ortiz2-2/+5
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add platform data pointer backSamuel Ortiz2-0/+11
Now that we have a way to pass MFD cells down to the sub drivers, we can gradually get rid of mfd_data by putting the platform pointer back in place. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26tmpfs: fix XATTR N overriding POSIX_ACL YEric Paris1-14/+15
Choosing TMPFS_XATTR default N was switching off TMPFS_POSIX_ACL, even if it had been Y in oldconfig; and Linus reports that PulseAudio goes subtly wrong unless it can use ACLs on /dev/shm. Make TMPFS_POSIX_ACL select TMPFS_XATTR (and depend upon TMPFS), and move the TMPFS_POSIX_ACL entry before the TMPFS_XATTR entry, to avoid asking unnecessary questions then ignoring their answers. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26video: mb862xx: udelay need linux/delay.hStephen Rothwell1-0/+1
Fix this: drivers/video/mb862xx/mb862xx-i2c.c: In function 'mb862xx_i2c_wait_event': drivers/video/mb862xx/mb862xx-i2c.c:25: error: implicit declaration of function 'udelay' caused by commit f8a6b1f44833 ("video: mb862xx: add support for controller's I2C bus adapter"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/linux-2.6-nsfdLinus Torvalds14-12/+444
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/linux-2.6-nsfd: net: fix get_net_ns_by_fd for !CONFIG_NET_NS ns proc: Return -ENOENT for a nonexistent /proc/self/ns/ entry. ns: Declare sys_setns in syscalls.h net: Allow setting the network namespace by fd ns proc: Add support for the ipc namespace ns proc: Add support for the uts namespace ns proc: Add support for the network namespace. ns: Introduce the setns syscall ns: proc files for namespace naming policy.
2011-05-26slub: remove no-longer used 'unlock_out' labelLinus Torvalds1-1/+0
Commit a71ae47a2cbf ("slub: Fix double bit unlock in debug mode") removed the only goto to this label, resulting in mm/slub.c: In function '__slab_alloc': mm/slub.c:1834: warning: label 'unlock_out' defined but not used fixed trivially by the removal of the label itself too. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds187-1203/+2049
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (89 commits) bonding: documentation and code cleanup for resend_igmp bonding: prevent deadlock on slave store with alb mode (v3) net: hold rtnl again in dump callbacks Add Fujitsu 1000base-SX PCI ID to tg3 bnx2x: protect sequence increment with mutex sch_sfq: fix peek() implementation isdn: netjet - blacklist Digium TDM400P via-velocity: don't annotate MAC registers as packed xen: netfront: hold RTNL when updating features. sctp: fix memory leak of the ASCONF queue when free asoc net: make dev_disable_lro use physical device if passed a vlan dev (v2) net: move is_vlan_dev into public header file (v2) bug.h: Fix build with CONFIG_PRINTK disabled. wireless: fix fatal kernel-doc error + warning in mac80211.h wireless: fix cfg80211.h new kernel-doc warnings iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabled dst: catch uninitialized metrics be2net: hash key for rss-config cmd not set bridge: initialize fake_rtable metrics net: fix __dst_destroy_metrics_generic() ... Fix up trivial conflicts in drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds49-556/+5699
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits) mmc: core: eMMC bus width may not work on all platforms mmc: sdhci: Auto-CMD23 fixes. mmc: sdhci: Auto-CMD23 support. mmc: core: Block CMD23 support for UHS104/SDXC cards. mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. mmc: core: Use CMD23 for multiblock transfers when we can. mmc: quirks: Add/remove quirks conditional support. mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w mmc: core: duplicated trial with same freq in mmc_rescan_try_freq() mmc: core: add support for eMMC Dual Data Rate mmc: core: eMMC signal voltage does not use CMD11 mmc: sdhci-pxa: add platform code for UHS signaling mmc: sdhci: add hooks for setting UHS in platform specific code mmc: core: clear MMC_PM_KEEP_POWER flag on resume mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume mmc: sdhi: allow powering down controller with no card inserted mmc: tmio: runtime suspend the controller, where possible mmc: sdhi: support up to 3 interrupt sources mmc: sdhi: print physical base address and clock rate ...
2011-05-26Merge branch 'kconfig-for-40' of ↵Linus Torvalds12-87/+118
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig-for-40' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: xconfig: merge code path to conf_write() kconfig: do not record timestamp in .config gconfig: Hide unused left treeview when start up the interface gconfig: enable rules hint for main treeviews MAINTAINERS: Update KCONFIG entry kconfig-language: add to hints kconfig: Document the new "visible if" syntax kconfig: quiet commands when V=0 kconfig: change update-po-config to reflect new layout of arch/um kconfig: make update-po-config work in KBUILD_OUTPUT kconfig: rearrange clean-files kconfig: change gconf to modify hostprogs-y like nconf and mconf kconfig: change qconf to modify hostprogs-y like nconf and mconf kconfig: only build kxgettext when needed nconfig: Silence unused return values from wattrset kconfig: Do not record timestamp in auto.conf and autoconf.h kconfig: get rid of unused flags kconfig: allow multiple inclusion of the same file kconfig: Avoid buffer underrun in choice input
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-09 06:14:04 +0300