Age | Commit message (Collapse) | Author | Files | Lines |
|
Add documentation on:
- measurement of phase of signal between pin and dpll
- adjustment of pin signal phase
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ivan Vecera says:
====================
i40e: Add basic devlink support
The series adds initial support for devlink to i40e driver.
Patch-set overview:
Patch 1: Adds initial devlink support (devlink and port registration)
Patch 2: Refactors and split i40e_nvm_version_str()
Patch 3: Adds support for 'devlink dev info'
Patch 4: Refactors existing helper function to read PBA ID
Patch 5: Adds 'board.id' to 'devlink dev info' using PBA ID
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose stored PBA ID string as unique board identifier via
devlink's .info_get command.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function i40e_read_pba_string() is currently unused but will be used
by subsequent patch to provide board ID via devlink device info.
The function reads PBA block from NVM so it cannot be called during
adapter reset and as we would like to provide PBA ID via devlink
info it is better to read the PBA ID during i40e_probe() and cache
it in i40e_hw structure to avoid a waiting for potential adapter
reset in devlink info callback.
So...
- Remove pba_num and pba_num_size arguments from the function,
allocate resource managed buffer to store PBA ID string and
save resulting pointer to i40e_hw->pba_id field
- Make the function void as the PBA ID can be missing and in this
case (or in case of NVM reading failure) the i40e_hw->pba_id
will be NULL
- Rename the function to i40e_get_pba_string() to align with other
functions like i40e_get_oem_version() i40e_get_port_mac_addr()...
- Call this function on init during i40e_probe()
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide devlink .info_get callback to allow the driver to report
detailed version information. The following info is reported:
"serial_number" -> The PCI DSN of the adapter
"fw.mgmt" -> The version of the firmware
"fw.mgmt.api" -> The API version of interface exposed over the AdminQ
"fw.psid" -> The version of the NVM image
"fw.bundle_id" -> Unique identifier for the combined flash image
"fw.undi" -> The combo image version
With this, 'devlink dev info' provides at least the same amount
information as is reported by ETHTOOL_GDRVINFO:
$ ethtool -i enp2s0f0 | egrep '(driver|firmware)'
driver: i40e
firmware-version: 9.30 0x8000e5f3 1.3429.0
$ devlink dev info pci/0000:02:00.0
pci/0000:02:00.0:
driver i40e
serial_number c0-de-b7-ff-ff-ef-ec-3c
versions:
running:
fw.mgmt 9.130.73618
fw.mgmt.api 1.15
fw.psid 9.30
fw.bundle_id 0x8000e5f3
fw.undi 1.3429.0
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function formats NVM version string according adapter's
EETrackID value. If this value OEM specific (0xffffffff) then
the reported version is with format:
"<gen>.<snap>.<release>"
and in other case
"<nvm_maj>.<nvm_min> <eetrackid> <cvid_maj>.<cvid_bld>.<cvid_min>"
These versions are reported in the subsequent patch in this series
that implements devlink .info_get but separately.
So split the function into separate ones, refactor it to use them
and remove ugly static string buffer.
Additionally convert NVM/OEM version mask macros to use GENMASK and
use FIELD_GET/FIELD_PREP for them in i40e_nvm_version_str() and
i40e_get_oem_version(). This makes code more readable and allows
us to remove related shift macros.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an initial support for devlink interface to i40e driver.
Similarly to ice driver the implementation doe not enable devlink
to manage device-wide configuration and devlink instance is created
for each physical function of PCIe device.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we are trying to timestamp a TX packet, there may be
occasions when the TX timestamp register is still not
updated with the latest timestamp even if the timestamp
packet descriptor is marked as complete.
This usually happens in cases where the system is under
stress or flow control is affecting the transmit side.
We will solve this problem by saving the snapshot of the
timestamp register when we are posting the TX descriptor.
At this time, the register contains previously timestamped
packet's value and valid timestamp of the current packet must
be different than this.
Upon completion of the current descriptor, we will check if
the timestamp register is updated or not before timestamping
the skb. If not updated, we will schedule the ptp worker to
fetch the updated time later and timestamp the skb.
Also now we restrict number of outstanding PTP TX packet
requests to 1.
Reported-by: Simon White <Simon.White@viavisolutions.com>
Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a section to netdev maintainer doc encouraging reviewers
to chime in on the mailing list.
The questions about "when is it okay to share feedback"
keep coming up (most recently at netconf) and the answer
is "pretty much always".
Extend the section of 7.AdvancedTopics.rst which deals
with reviews a little bit to add stuff we had been recommending
locally.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Edward Cree says:
====================
sfc: support conntrack NAT offload
The EF100 MAE supports performing NAT (and NPT) on packets which match in
the conntrack table. This series adds that capability to the driver.
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an IP address and/or L4 port for NAPT is available from a CT match,
the MAE will perform the edits; if no CT lookup has been performed for
this packet, the CT lookup did not return a match, or the matched CT
entry did not include NAPT, the action will have no effect.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MAE can edit either address, L4 port, or both, for either source
or destination. These can't be mixed; i.e. it can edit source addr
and source port, but not (say) source addr and dest port.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Arseniy Krasnov says:
====================
vsock/virtio/vhost: MSG_ZEROCOPY preparations
this patchset is first of three parts of another big patchset for
MSG_ZEROCOPY flag support:
https://lore.kernel.org/netdev/20230701063947.3422088-1-AVKrasnov@sberdevices.ru/
During review of this series, Stefano Garzarella <sgarzare@redhat.com>
suggested to split it for three parts to simplify review and merging:
1) virtio and vhost updates (for fragged skbs) <--- this patchset
2) AF_VSOCK updates (allows to enable MSG_ZEROCOPY mode and read
tx completions) and update for Documentation/.
3) Updates for tests and utils.
This series enables handling of fragged skbs in virtio and vhost parts.
Newly logic won't be triggered, because SO_ZEROCOPY options is still
impossible to enable at this moment (next bunch of patches from big
set above will enable it).
I've included changelog to some patches anyway, because there were some
comments during review of last big patchset from the link above.
Head for this patchset is:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=f2fa1c812c91e99d0317d1fc7d845e1e05f39716
Link to v1:
https://lore.kernel.org/netdev/20230717210051.856388-1-AVKrasnov@sberdevices.ru/
Link to v2:
https://lore.kernel.org/netdev/20230718180237.3248179-1-AVKrasnov@sberdevices.ru/
Link to v3:
https://lore.kernel.org/netdev/20230720214245.457298-1-AVKrasnov@sberdevices.ru/
Link to v4:
https://lore.kernel.org/netdev/20230727222627.1895355-1-AVKrasnov@sberdevices.ru/
Link to v5:
https://lore.kernel.org/netdev/20230730085905.3420811-1-AVKrasnov@sberdevices.ru/
Link to v6:
https://lore.kernel.org/netdev/20230814212720.3679058-1-AVKrasnov@sberdevices.ru/
Link to v7:
https://lore.kernel.org/netdev/20230827085436.941183-1-avkrasnov@salutedevices.com/
Link to v8:
https://lore.kernel.org/netdev/20230911202234.1932024-1-avkrasnov@salutedevices.com/
Changelog:
v3 -> v4:
* Patchset rebased and tested on new HEAD of net-next (see hash above).
v4 -> v5:
* See per-patch changelog after ---.
v5 -> v6:
* Patchset rebased and tested on new HEAD of net-next (see hash above).
* See per-patch changelog after ---.
v6 -> v7:
* Patchset rebased and tested on new HEAD of net-next (see hash above).
* See per-patch changelog after ---.
v7 -> v8:
* Patchset rebased and tested on new HEAD of net-next (see hash above).
* See per-patch changelog after ---.
v8 -> v9:
* Patchset rebased and tested on new HEAD of net-next (see hash above).
* See per-patch changelog after ---.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds set of tests which use io_uring for rx/tx. This test suite is
implemented as separated util like 'vsock_test' and has the same set of
input arguments as 'vsock_test'. These tests only cover cases of data
transmission (no connect/bind/accept etc).
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To use this option pass '--zerocopy' parameter:
./vsock_perf --zerocopy --sender <cid> ...
With this option MSG_ZEROCOPY flag will be passed to the 'send()' call.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds three tests for MSG_ZEROCOPY feature:
1) SOCK_STREAM tx with different buffers.
2) SOCK_SEQPACKET tx with different buffers.
3) SOCK_STREAM test to read empty error queue of the socket.
Patch also works as preparation for the next patches for tools in this
patchset: vsock_perf and vsock_uring_test:
1) Adds several new functions to util.c - they will be also used by
vsock_uring_test.
2) Adds two new functions for MSG_ZEROCOPY handling to a new source
file - such source will be shared between vsock_test, vsock_perf and
vsock_uring_test, thus avoiding code copy-pasting.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds description of MSG_ZEROCOPY flag support for AF_VSOCK type of
socket.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For AF_VSOCK, zerocopy tx mode depends on transport, so this option must
be set in AF_VSOCK implementation where transport is accessible (if
transport is not set during setting SO_ZEROCOPY: for example socket is
not connected, then SO_ZEROCOPY will be enabled, but once transport will
be assigned, support of this type of transmission will be checked).
To handle SO_ZEROCOPY, AF_VSOCK implementation uses SOCK_CUSTOM_SOCKOPT
bit, thus handling SOL_SOCKET option operations, but all of them except
SO_ZEROCOPY will be forwarded to the generic handler by calling
'sock_setsockopt()'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'msgzerocopy_allow()' callback for loopback transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'msgzerocopy_allow()' callback for virtio transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add 'msgzerocopy_allow()' callback for vhost transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This bit is used by io_uring in case of zerocopy tx mode. io_uring code
checks, that socket has this feature. This patch sets it in two places:
1) For socket in 'connect()' call.
2) For new socket which is returned by 'accept()' call.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This feature totally depends on transport, so if transport doesn't
support it, return error.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds handling of MSG_ERRQUEUE input flag in receive call. This flag
is used to read socket's error queue instead of data queue. Possible
scenario of error queue usage is receiving completions for transmission
with MSG_ZEROCOPY flag. This patch also adds new defines: 'SOL_VSOCK'
and 'VSOCK_RECVERR'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If socket's error queue is not empty, EPOLLERR must be set. Otherwise,
reader of error queue won't detect data in it using EPOLLERR bit.
Currently for AF_VSOCK this is actual only with MSG_ZEROCOPY, as this
feature is the only user of an error queue of the socket.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 1dab47139e61 ("appletalk: remove ipddp driver") removes the
config IPDDP, there is some minor code clean-up possible in the appletalk
network layer.
Remove some code in appletalk layer after the ipddp driver is gone.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231012063443.22368-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This patch eliminates three uses of strncpy():
Firstly, `dest` is expected to be NUL-terminated which is evident by the
manual setting of a NUL-byte at size - 1. For this use specifically,
strscpy() is a viable replacement due to the fact that it guarantees
NUL-termination on the destination buffer.
The next two cases should simply be memcpy() as the size of the src
string is always 3 and the destination string just wants the first 3
bytes changed.
To be clear, there are no buffer overread bugs in the current code as
the sizes and offsets are carefully managed such that buffers are
NUL-terminated. However, with these changes, the code is now more robust
and less ambiguous (and hopefully easier to read).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-qlogic-qed-qed_debug-c-v2-1-16d2c0162b80@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
net: netconsole: configfs entries for boot target
There is a limitation in netconsole, where it is impossible to
disable or modify the target created from the command line parameter.
(netconsole=...).
"netconsole" cmdline parameter sets the remote IP, and if the remote IP
changes, the machine needs to be rebooted (with the new remote IP set in
the command line parameter).
This allows the user to modify a target without the need to restart the
machine.
This functionality sits on top of the dynamic target reconfiguration that is
already implemented in netconsole.
The way to modify a boot time target is creating special named configfs
directories, that will be associated with the targets coming from
`netconsole=...`.
Example:
Let's suppose you have two netconsole targets defined at boot time::
netconsole=4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc;4444@10.0.0.1/eth1,9353@10.0.0.3/12:34:56:78:9a:bc
You can modify these targets in runtime by creating the following targets::
$ mkdir cmdline1
$ cat cmdline1/remote_ip
10.0.0.3
$ echo 0 > cmdline1/enabled
$ echo 10.0.0.4 > cmdline1/remote_ip
$ echo 1 > cmdline1/enabled
====================
Link: https://lore.kernel.org/r/20231012111401.333798-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the previous patches, there is no more limitation at modifying the
targets created at boot time (or module load time).
Document the way on how to create the configfs directories to be able to
modify these netconsole targets.
The design discussion about this topic could be found at:
https://lore.kernel.org/all/ZRWRal5bW93px4km@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the attachment of a dynamic target to the target created during
boot time. The boot-time targets are named as "cmdline\d", where "\d" is
a number starting at 0.
If the user creates a dynamic target named "cmdline0", it will attach to
the first target created at boot time (as defined in the
`netconsole=...` command line argument). `cmdline1` will attach to the
second target and so forth.
If there is no netconsole target created at boot time, then, the target
name could be reused.
Relevant design discussion:
https://lore.kernel.org/all/ZRWRal5bW93px4km@gmail.com/
Suggested-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For netconsole targets allocated during the boot time (passing
netconsole=... argument), netconsole_target->item is not initialized.
That is not a problem because it is not used inside configfs.
An upcoming patch will be using it, thus, initialize the targets with
the name 'cmdline' plus a counter starting from 0. This name will match
entries in the configfs later.
Suggested-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move alloc_param_target() and its counterpart (free_param_target())
to the bottom of the file. These functions are called mostly at
initialization/cleanup of the module, and they should be just above the
callers, at the bottom of the file.
From a practical perspective, having alloc_param_target() at the bottom
of the file will avoid forward declaration later (in the following
patch).
Nothing changed other than the functions location.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
`desc` is expected to be NUL-terminated as evident by the manual
NUL-byte assignment. Moreover, NUL-padding does not seem to be
necessary.
The only caller of efx_mcdi_nvram_metadata() is
efx_devlink_info_nvram_partition() which provides a NULL for `desc`:
| rc = efx_mcdi_nvram_metadata(efx, partition_type, NULL, version, NULL, 0);
Due to this, I am not sure this code is even reached but we should still
favor something other than strncpy.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-sfc-mcdi-c-v1-1-478c8de1039d@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this dedicated helper function.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-phy-nxp-tja11xx-c-v1-1-5ad6c9dff5c4@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
NUL-padding is not needed due to `ident` being memset'd to 0 just before
the copy.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-pensando-ionic-ionic_main-c-v1-1-23c62a16ff58@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy() in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-microchip-sparx5-sparx5_ethtool-c-v1-1-410953d07f42@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect `dst` to be NUL-terminated based on its use with format
strings:
| mlx4_dbg(dev, "Reporting Driver Version to FW: %s\n", dst);
Moreover, NUL-padding is not required.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-mellanox-mlx4-fw-c-v1-1-4d7b5d34c933@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect res->name to be NUL-terminated based on its usage with format
strings:
| dev_err(cpp->dev.parent, "Dangling area: %d:%d:%d:0x%0llx-0x%0llx%s%s\n",
| NFP_CPP_ID_TARGET_of(res->cpp_id),
| NFP_CPP_ID_ACTION_of(res->cpp_id),
| NFP_CPP_ID_TOKEN_of(res->cpp_id),
| res->start, res->end,
| res->name ? " " : "",
| res->name ? res->name : "");
... and with strcmp()
| if (!strcmp(res->name, NFP_RESOURCE_TBL_NAME)) {
Moreover, NUL-padding is not required as `res` is already
zero-allocated:
| res = kzalloc(sizeof(*res), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) rather than (dest, src, SOME_LEN).
Typically the pattern of 1) allocate memory for string, 2) copy string
into freshly-allocated memory is a candidate for kmemdup_nul() but in
this case we are allocating the entirety of the `res` struct and that
should stay as is. As mentioned above, simple 1:1 replacement of strncpy
-> strscpy :)
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-netronome-nfp-nfpcore-nfp_resource-c-v1-1-7d1c984f0eba@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver allocates skbs during initialization and during Rx
processing. Take advantage of the fact that the former happens in
process context and allocate the skbs using GFP_KERNEL to decrease the
probability of allocation failure.
Tested with CONFIG_DEBUG_ATOMIC_SLEEP=y.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/dfa6ed0926e045fe7c14f0894cc0c37fee81bf9d.1697034729.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently for VFs, mailbox returns ENODEV error when hardware timestamping
enable is requested. This patch fixes this issue. Modified this patch to
return EPERM error for the PF/VFs which are not attached to CGX/RPM.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231011121551.1205211-1-saikrishnag@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiawen Wu says:
====================
Wangxun ethtool stats
Support to show ethtool stats for txgbe/ngbe.
====================
Link: https://lore.kernel.org/r/20231011091906.70486-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support to show ethtool statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support to show ethtool statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement update and clear Rx/Tx statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
This change could result in misaligned strings when if(cnt) fails. To
combat this, use ternary to place empty string in buffer and properly
increment pointer to next string slot.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-dsa-vitesse-vsc73xx-core-c-v2-1-ba4416a9ff23@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dave Marchevsky says:
====================
At Meta we have a profiling daemon which periodically collects
information on many hosts. This collection usually involves grabbing
stacks (user and kernel) using perf_event BPF progs and later symbolicating
them. For user stacks we try to use BPF_F_USER_BUILD_ID and rely on
remote symbolication, but BPF_F_USER_BUILD_ID doesn't always succeed. In
those cases we must fall back to digging around in /proc/PID/maps to map
virtual address to (binary, offset). The /proc/PID/maps digging does not
occur synchronously with stack collection, so the process might already
be gone, in which case it won't have /proc/PID/maps and we will fail to
symbolicate.
This 'exited process problem' doesn't occur very often as
most of the prod services we care to profile are long-lived daemons, but
there are enough usecases to warrant a workaround: a BPF program which
can be optionally loaded at data collection time and essentially walks
/proc/PID/maps. Currently this is done by walking the vma list:
struct vm_area_struct* mmap = BPF_CORE_READ(mm, mmap);
mmap_next = BPF_CORE_READ(rmap, vm_next); /* in a loop */
Since commit 763ecb035029 ("mm: remove the vma linked list") there's no
longer a vma linked list to walk. Walking the vma maple tree is not as
simple as hopping struct vm_area_struct->vm_next. Luckily,
commit f39af05949a4 ("mm: add VMA iterator"), another commit in that series,
added struct vma_iterator and for_each_vma macro for easy vma iteration. If
similar functionality was exposed to BPF programs, it would be perfect for our
usecase.
This series adds such functionality, specifically a BPF equivalent of
for_each_vma using the open-coded iterator style.
Notes:
* This approach was chosen after discussion on a previous series [0] which
attempted to solve the same problem by adding a BPF_F_VMA_NEXT flag to
bpf_find_vma.
* Unlike the task_vma bpf_iter, the open-coded iterator kfuncs here do not
drop the vma read lock between iterations. See Alexei's response in [0].
* The [vsyscall] page isn't really part of task->mm's vmas, but
/proc/PID/maps returns information about it anyways. The vma iter added
here does not do the same. See comment on selftest in patch 3.
* bpf_iter_task_vma allocates a _data struct which contains - among other
things - struct vma_iterator, using BPF allocator and keeps a pointer to
the bpf_iter_task_vma_data. This is done in order to prevent changes to
struct ma_state - which is wrapped by struct vma_iterator - from
necessitating changes to uapi struct bpf_iter_task_vma.
Changelog:
v6 -> v7: https://lore.kernel.org/bpf/20231010185944.3888849-1-davemarchevsky@fb.com/
Patch numbers correspond to their position in v6
Patch 2 ("selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c")
* Add Andrii ack
Patch 3 ("bpf: Introduce task_vma open-coded iterator kfuncs")
* Add Andrii ack
* Add missing __diag_ignore_all for -Wmissing-prototypes (Song)
Patch 4 ("selftests/bpf: Add tests for open-coded task_vma iter")
* Remove two unnecessary header includes (Andrii)
* Remove extraneous !vmas_seen check (Andrii)
New Patch ("bpf: Add BPF_KFUNC_{START,END}_defs macros")
* After talking to Andrii, this is an attempt to clean up __diag_ignore_all
spam everywhere kfuncs are defined. If nontrivial changes are needed,
let's apply the other 4 and I'll respin as a standalone patch.
v5 -> v6: https://lore.kernel.org/bpf/20231010175637.3405682-1-davemarchevsky@fb.com/
Patch 4 ("selftests/bpf: Add tests for open-coded task_vma iter")
* Remove extraneous blank line. I did this manually to the .patch file
for v5, which caused BPF CI to complain about failing to apply the
series
v4 -> v5: https://lore.kernel.org/bpf/20231002195341.2940874-1-davemarchevsky@fb.com/
Patch numbers correspond to their position in v4
New Patch ("selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c")
* Patch 2's renaming of this selftest, and associated changes in the
userspace runner, are split out into this separate commit (Andrii)
Patch 2 ("bpf: Introduce task_vma open-coded iterator kfuncs")
* Remove bpf_iter_task_vma kfuncs from libbpf's bpf_helpers.h, they'll be
added to selftests' bpf_experimental.h in selftests patch below (Andrii)
* Split bpf_iter_task_vma.c renaming into separate commit (Andrii)
Patch 3 ("selftests/bpf: Add tests for open-coded task_vma iter")
* Add bpf_iter_task_vma kfuncs to bpf_experimental.h (Andrii)
* Remove '?' from prog SEC, open_and_load the skel in one operation (Andrii)
* Ensure that fclose() always happens in test runner (Andrii)
* Use global var w/ 1000 (vm_start, vm_end) structs instead of two
MAP_TYPE_ARRAY's w/ 1k u64s each (Andrii)
v3 -> v4: https://lore.kernel.org/bpf/20230822050558.2937659-1-davemarchevsky@fb.com/
Patch 1 ("bpf: Don't explicitly emit BTF for struct btf_iter_num")
* Add Andrii ack
Patch 2 ("bpf: Introduce task_vma open-coded iterator kfuncs")
* Mark bpf_iter_task_vma_new args KF_RCU and remove now-unnecessary !task
check (Yonghong)
* Although KF_RCU is a function-level flag, in reality it only applies to
the task_struct *task parameter, as the other two params are a scalar int
and a specially-handled KF_ARG_PTR_TO_ITER
* Remove struct bpf_iter_task_vma definition from uapi headers, define in
kernel/bpf/task_iter.c instead (Andrii)
Patch 3 ("selftests/bpf: Add tests for open-coded task_vma iter")
* Use a local var when looping over vmas to track map idx. Update vmas_seen
global after done iterating. Don't start iterating or update vmas_seen if
vmas_seen global is nonzero. (Andrii)
* Move getpgid() call to correct spot - above skel detach. (Andrii)
v2 -> v3: https://lore.kernel.org/bpf/20230821173415.1970776-1-davemarchevsky@fb.com/
Patch 1 ("bpf: Don't explicitly emit BTF for struct btf_iter_num")
* Add Yonghong ack
Patch 2 ("bpf: Introduce task_vma open-coded iterator kfuncs")
* UAPI bpf header and tools/ version should match
* Add bpf_iter_task_vma_kern_data which bpf_iter_task_vma_kern points to,
bpf_mem_alloc/free it instead of just vma_iterator. (Alexei)
* Inner data ptr == NULL implies initialization failed
v1 -> v2: https://lore.kernel.org/bpf/20230810183513.684836-1-davemarchevsky@fb.com/
* Patch 1
* Now removes the unnecessary BTF_TYPE_EMIT instead of changing the
type (Yonghong)
* Patch 2
* Don't do unnecessary BTF_TYPE_EMIT (Yonghong)
* Bump task refcount to prevent ->mm reuse (Yonghong)
* Keep a pointer to vma_iterator in bpf_iter_task_vma, alloc/free
via BPF mem allocator (Yonghong, Stanislav)
* Patch 3
[0]: https://lore.kernel.org/bpf/20230801145414.418145-1-davemarchevsky@fb.com/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The open-coded task_vma iter added earlier in this series allows for
natural iteration over a task's vmas using existing open-coded iter
infrastructure, specifically bpf_for_each.
This patch adds a test demonstrating this pattern and validating
correctness. The vma->vm_start and vma->vm_end addresses of the first
1000 vmas are recorded and compared to /proc/PID/maps output. As
expected, both see the same vmas and addresses - with the exception of
the [vsyscall] vma - which is explained in a comment in the prog_tests
program.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-5-davemarchevsky@fb.com
|
|
This patch adds kfuncs bpf_iter_task_vma_{new,next,destroy} which allow
creation and manipulation of struct bpf_iter_task_vma in open-coded
iterator style. BPF programs can use these kfuncs directly or through
bpf_for_each macro for natural-looking iteration of all task vmas.
The implementation borrows heavily from bpf_find_vma helper's locking -
differing only in that it holds the mmap_read lock for all iterations
while the helper only executes its provided callback on a maximum of 1
vma. Aside from locking, struct vma_iterator and vma_next do all the
heavy lifting.
A pointer to an inner data struct, struct bpf_iter_task_vma_data, is the
only field in struct bpf_iter_task_vma. This is because the inner data
struct contains a struct vma_iterator (not ptr), whose size is likely to
change under us. If bpf_iter_task_vma_kern contained vma_iterator directly
such a change would require change in opaque bpf_iter_task_vma struct's
size. So better to allocate vma_iterator using BPF allocator, and since
that alloc must already succeed, might as well allocate all iter fields,
thereby freezing struct bpf_iter_task_vma size.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-4-davemarchevsky@fb.com
|
|
Further patches in this series will add a struct bpf_iter_task_vma,
which will result in a name collision with the selftest prog renamed in
this patch. Rename the selftest to avoid the collision.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-3-davemarchevsky@fb.com
|