Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
Pull alpha updates from Al Viro:
"Alpha architecture cleanups and fixes.
One thing *not* included is lazy FPU switching stuff - this pile is
just the straightforward stuff"
* tag 'pull-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha: ret_from_fork can go straight to ret_to_user
alpha: syscall exit cleanup
alpha: fix handling of a3 on straced syscalls
alpha: fix syscall entry in !AUDUT_SYSCALL case
alpha: _TIF_ALLWORK_MASK is unused
alpha: fix TIF_NOTIFY_SIGNAL handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull elf coredumping updates from Al Viro:
"Unification of regset and non-regset sides of ELF coredump handling.
Collecting per-thread register values is the only thing that needs to
be ifdefed there..."
* tag 'pull-elfcore' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[elf] get rid of get_note_info_size()
[elf] unify regset and non-regset cases
[elf][non-regset] use elf_core_copy_task_regs() for dumper as well
[elf][non-regset] uninline elf_core_copy_task_fpregs() (and lose pt_regs argument)
elf_core_copy_task_regs(): task_pt_regs is defined everywhere
[elf][regset] simplify thread list handling in fill_note_info()
[elf][regset] clean fill_note_info() a bit
kill extern of vsyscall32_sysctl
kill coredump_params->regs
kill signal_pt_regs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- A ptrace API cleanup series from Sergey Shtylyov
- Fixes and cleanups for kexec from ye xingchen
- nilfs2 updates from Ryusuke Konishi
- squashfs feature work from Xiaoming Ni: permit configuration of the
filesystem's compression concurrency from the mount command line
- A series from Akinobu Mita which addresses bound checking errors when
writing to debugfs files
- A series from Yang Yingliang to address rapidio memory leaks
- A series from Zheng Yejian to address possible overflow errors in
encode_comp_t()
- And a whole shower of singleton patches all over the place
* tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits)
ipc: fix memory leak in init_mqueue_fs()
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
rapidio: devices: fix missing put_device in mport_cdev_open
kcov: fix spelling typos in comments
hfs: Fix OOB Write in hfs_asc2mac
hfs: fix OOB Read in __hfs_brec_find
relay: fix type mismatch when allocating memory in relay_create_buf()
ocfs2: always read both high and low parts of dinode link count
io-mapping: move some code within the include guarded section
kernel: kcsan: kcsan_test: build without structleak plugin
mailmap: update email for Iskren Chernev
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
rapidio: fix possible UAF when kfifo_alloc() fails
relay: use strscpy() is more robust and safer
cpumask: limit visibility of FORCE_NR_CPUS
acct: fix potential integer overflow in encode_comp_t()
acct: fix accuracy loss for input value of encode_comp_t()
linux/init.h: include <linux/build_bug.h> and <linux/stringify.h>
rapidio: rio: fix possible name leak in rio_register_mport()
rapidio: fix possible name leaks when rio_add_device() fails
...
|
|
Pull documentation updates from Jonathan Corbet:
"This was a not-too-busy cycle for documentation; highlights include:
- The beginnings of a set of translations into Spanish, headed up by
Carlos Bilbao
- More Chinese translations
- A change to the Sphinx "alabaster" theme by default for HTML
generation.
Unlike the previous default (Read the Docs), alabaster is shipped
with Sphinx by default, reducing the number of other dependencies
that need to be installed. It also (IMO) produces a cleaner and
more readable result.
- The ability to render the documentation into the texinfo format
(something Sphinx could always do, we just never wired it up until
now)
Plus the usual collection of typo fixes, build-warning fixes, and
minor updates"
* tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits)
Documentation/features: Use loongarch instead of loong
Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR
docs/zh_CN: Fix '.. only::' directive's expression
docs/sp_SP: Add memory-barriers.txt Spanish translation
docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI
docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI
Documentation/features: Update feature lists for 6.1
Documentation: Fixed a typo in bootconfig.rst
docs/sp_SP: Add process coding-style translation
docs/sp_SP: Add kernel-docs.rst Spanish translation
docs: Create translations/sp_SP/process/, move submitting-patches.rst
docs: Add book to process/kernel-docs.rst
docs: Retire old resources from kernel-docs.rst
docs: Update maintainer of kernel-docs.rst
Documentation: riscv: Document the sv57 VM layout
Documentation: USB: correct possessive "its" usage
math64: fix kernel-doc return value warnings
math64: add kernel-doc for DIV64_U64_ROUND_UP
math64: favor kernel-doc from header files
doc: add texinfodocs and infodocs targets
...
|
|
Pull rust updates from Miguel Ojeda:
"The first set of changes after the merge, the major ones being:
- String and formatting: new types 'CString', 'CStr', 'BStr' and
'Formatter'; new macros 'c_str!', 'b_str!' and 'fmt!'.
- Errors: the rest of the error codes from 'errno-base.h', as well as
some 'From' trait implementations for the 'Error' type.
- Printing: the rest of the 'pr_*!' levels and the continuation one
'pr_cont!', as well as a new sample.
- 'alloc' crate: new constructors 'try_with_capacity()' and
'try_with_capacity_in()' for 'RawVec' and 'Vec'.
- Procedural macros: new macros '#[vtable]' and 'concat_idents!', as
well as better ergonomics for 'module!' users.
- Asserting: new macros 'static_assert!', 'build_error!' and
'build_assert!', as well as a new crate 'build_error' to support
them.
- Vocabulary types: new types 'Opaque' and 'Either'.
- Debugging: new macro 'dbg!'"
* tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux: (28 commits)
rust: types: add `Opaque` type
rust: types: add `Either` type
rust: build_assert: add `build_{error,assert}!` macros
rust: add `build_error` crate
rust: static_assert: add `static_assert!` macro
rust: std_vendor: add `dbg!` macro based on `std`'s one
rust: str: add `fmt!` macro
rust: str: add `CString` type
rust: str: add `Formatter` type
rust: str: add `c_str!` macro
rust: str: add `CStr` unit tests
rust: str: implement several traits for `CStr`
rust: str: add `CStr` type
rust: str: add `b_str!` macro
rust: str: add `BStr` type
rust: alloc: add `Vec::try_with_capacity{,_in}()` constructors
rust: alloc: add `RawVec::try_with_capacity_in()` constructor
rust: prelude: add `error::code::*` constant items
rust: error: add `From` implementations for `Error`
rust: error: add codes from `errno-base.h`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- New tool "rv" for starting and stopping runtime verification.
Example:
./rv mon wip -r printk -v
Enables the wake-in-preempt monitor and the printk reactor in verbose
mode
- Fix exit status of rtla usage() calls
* tag 'trace-tools-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation/rv: Add verification/rv man pages
tools/rv: Add in-kernel monitor interface
rv: Add rv tool
rtla: Fix exit status when returning from calls to usage()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix minconfig test to unset the config and not relying on
olddefconfig to do it, as some configs are set to default y
- Fix reading grub2 menus for handling submenus
- Add new ${shell <cmd>} to execute shell commands that will be useful
for setting variables like: HOSTNAME := ${shell hostname}
* tag 'ktest-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Add shell commands to variables
kest.pl: Fix grub2 menu handling for rebooting
ktest.pl minconfig: Unset configs instead of just removing them
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several enhancements, fixes, clean-ups, documentation updates,
improvements to logging and KTAP compliance of KUnit test output:
- log numbers in decimal and hex
- parse KTAP compliant test output
- allow conditionally exposing static symbols to tests when KUNIT is
enabled
- make static symbols visible during kunit testing
- clean-ups to remove unused structure definition"
* tag 'linux-kselftest-kunit-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
Documentation: dev-tools: Clarify requirements for result description
apparmor: test: make static symbols visible during kunit testing
kunit: add macro to allow conditionally exposing static symbols to tests
kunit: tool: make parser preserve whitespace when printing test log
Documentation: kunit: Fix "How Do I Use This" / "Next Steps" sections
kunit: tool: don't include KTAP headers and the like in the test log
kunit: improve KTAP compliance of KUnit test output
kunit: tool: parse KTAP compliant test output
mm: slub: test: Use the kunit_get_current_test() function
kunit: Use the static key when retrieving the current test
kunit: Provide a static key to check if KUnit is actively running tests
kunit: tool: make --json do nothing if --raw_ouput is set
kunit: tool: tweak error message when no KTAP found
kunit: remove KUNIT_INIT_MEM_ASSERTION macro
Documentation: kunit: Remove redundant 'tips.rst' page
Documentation: KUnit: reword description of assertions
Documentation: KUnit: make usage.rst a superset of tips.rst, remove duplication
kunit: eliminate KUNIT_INIT_*_ASSERT_STRUCT macros
kunit: tool: remove redundant file.close() call in unit test
kunit: tool: unit tests all check parser errors, standardize formatting a bit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes and enhancements to existing tests and a few new tests:
- add new amd-pstate tests and fix and enhance existing ones
- add new watchdog tests and enhance existing ones to improve
coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes"
* tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits)
selftests/ftrace: Use long for synthetic event probe test
selftests/tpm2: Split async tests call to separate shell script runner
selftests: splice_read: Fix sysfs read cases
selftests: ftrace: Use "grep -E" instead of "egrep"
selftests: gpio: Use "grep -E" instead of "egrep"
selftests: kselftest_deps: Use "grep -E" instead of "egrep"
selftests/efivarfs: Add checking of the test return value
cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c
selftests: rtc: skip when RTC is not present
selftests/ftrace: event_triggers: wait longer for test_event_enable
selftests/vDSO: Add riscv getcpu & gettimeofday test
Documentation: amd-pstate: Add tbench and gitsource test introduction
selftests: amd-pstate: Trigger gitsource benchmark and test cpus
selftests: amd-pstate: Trigger tbench benchmark and test cpus
selftests: amd-pstate: Split basic.sh into run.sh and basic.sh.
selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh.
selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency
selftests/ftrace: Add check for ping command for trigger tests
selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature"
selftests/watchdog: add test for WDIOC_GETTEMP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"Baoquan was nice enough to run some clean ups for percpu"
* 'for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
mm/percpu: remove unused PERCPU_DYNAMIC_EARLY_SLOTS
mm/percpu.c: remove the lcm code since block size is fixed at page size
mm/percpu: replace the goto with break
mm/percpu: add comment to state the empty populated pages accounting
mm/percpu: Update the code comment when creating new chunk
mm/percpu: use list_first_entry_or_null in pcpu_reclaim_populated()
mm/percpu: remove unused pcpu_map_extend_chunks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- code cleanup
* tag 'livepatching-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Move the result-invariant calculation out of the loop
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing too interesting:
- Add CONFIG_DEBUG_GROUP_REF which makes cgroup refcnt operations
kprobable
- A couple cpuset optimizations
- Other misc changes including doc and test updates"
* tag 'cgroup-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove rcu_read_lock()/rcu_read_unlock() in critical section of spin_lock_irq()
cgroup/cpuset: Improve cpuset_css_alloc() description
kselftest/cgroup: Add cleanup() to test_cpuset_prs.sh
cgroup/cpuset: Optimize cpuset_attach() on v2
cgroup/cpuset: Skip spread flags update on v2
kselftest/cgroup: Fix gathering number of CPUs
cgroup: cgroup refcnt functions should be exported when CONFIG_DEBUG_CGROUP_REF
cgroup: Implement DEBUG_CGROUP_REF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Implement persistent user-requested affinity: introduce
affinity_context::user_mask and unconditionally preserve the
user-requested CPU affinity masks, for long-lived tasks to better
interact with cpusets & CPU hotplug events over longer timespans,
without destroying the original affinity intent if the underlying
topology changes.
- Uclamp updates: fix relationship between uclamp and fits_capacity()
- PSI fixes
- Misc fixes & updates
* tag 'sched-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clear ttwu_pending after enqueue_task()
sched/psi: Use task->psi_flags to clear in CPU migration
sched/psi: Stop relying on timer_pending() for poll_work rescheduling
sched/psi: Fix avgs_work re-arm in psi_avgs_work()
sched/psi: Fix possible missing or delayed pending event
sched: Always clear user_cpus_ptr in do_set_cpus_allowed()
sched: Enforce user requested affinity
sched: Always preserve the user requested cpumask
sched: Introduce affinity_context
sched: Add __releases annotations to affine_move_task()
sched/fair: Check if prev_cpu has highest spare cap in feec()
sched/fair: Consider capacity inversion in util_fits_cpu()
sched/fair: Detect capacity inversion
sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition
sched/uclamp: Make cpu_overutilized() use util_fits_cpu()
sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()
sched/uclamp: Make select_idle_capacity() use util_fits_cpu()
sched/uclamp: Fix fits_capacity() check in feec()
sched/uclamp: Make task_fits_capacity() use util_fits_cpu()
sched/uclamp: Fix relationship between uclamp and migration margin
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Thoroughly rewrite the data structures that implement perf task
context handling, with the goal of fixing various quirks and
unfeatures both in already merged, and in upcoming proposed code.
The old data structure is the per task and per cpu
perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and a
single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd2756811766 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology
discovery on various hardware models.
- Misc fixes & cleanups
* tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Make set_mapping() procedure void
perf/x86/intel/uncore: Update sysfs-devices-mapping file
perf/x86/intel/uncore: Enable UPI topology discovery for Sapphire Rapids
perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server
perf/x86/intel/uncore: Get UPI NodeID and GroupID
perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server
perf/x86/intel/uncore: Generalize get_topology() for SKX PMUs
perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D
perf/x86/intel/uncore: Clear attr_update properly
perf/x86/intel/uncore: Introduce UPI topology type
perf/x86/intel/uncore: Generalize IIO topology support
perf/core: Don't allow grouping events from different hw pmus
perf/amd/ibs: Make IBS a core pmu
perf: Fix function pointer case
perf/x86/amd: Remove the repeated declaration
perf: Fix possible memleak in pmu_dev_alloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Two changes in this cycle:
- a micro-optimization in static_key_slow_inc_cpuslocked()
- fix futex death-notification wakeup bug"
* tag 'locking-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Resend potentially swallowed owner death notification
jump_label: Use atomic_try_cmpxchg() in static_key_slow_inc_cpuslocked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternative update from Borislav Petkov:
"A single alternatives patching fix for modules:
- Have alternatives patch the same sections in modules as in vmlinux"
* tag 'x86_alternatives_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Consistently patch SMP locks in vmlinux and modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix confusing output from /sys/kernel/debug/ras/daemon_active
- Add another MCE severity error case to the Intel error severity table
to promote UC and AR errors to panic severity and remove the
corresponding code condition doing that.
- Make sure the thresholding and deferred error interrupts on AMD SMCA
systems clear the all registers reporting an error so that there are
no multiple errors logged for the same event
* tag 'ras_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS: Fix return value from show_trace()
x86/mce: Use severity table to handle uncorrected errors in kernel
x86/MCE/AMD: Clear DFR errors found in THR handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Make ghes_edac a simple module like the rest of the EDAC drivers and
drop the forced built-in only configuration by disentangling it from
GHES (Jia He)
- The usual small cleanups and improvements all over EDAC land
* tag 'edac_updates_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
EDAC/i5000: Mark as BROKEN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Dave Hansen:
"There are two little fixes in here, one to give better XSAVE warnings
and another to address some undefined behavior in offsetof().
There is also a collection of patches to fix some issues with ptrace
and the protection keys register (PKRU). PKRU is a real oddity because
it is exposed in the XSAVE-related ABIs, but it is generally managed
without using XSAVE in the kernel. This fix thankfully came with a
selftest to ward off future regressions.
Summary:
- Clarify XSAVE consistency warnings
- Fix up ptrace interface to protection keys register (PKRU)
- Avoid undefined compiler behavior with TYPE_ALIGN"
* tag 'x86_fpu_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN
selftests/vm/pkeys: Add a regression test for setting PKRU through ptrace
x86/fpu: Emulate XRSTOR's behavior if the xfeatures PKRU bit is not set
x86/fpu: Allow PKRU to be (once again) written by ptrace.
x86/fpu: Add a pkru argument to copy_uabi_to_xstate()
x86/fpu: Add a pkru argument to copy_uabi_from_kernel_to_xstate().
x86/fpu: Take task_struct* in copy_sigframe_from_user_to_xstate()
x86/fpu/xstate: Fix XSTATE_WARN_ON() to emit relevant diagnostics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Dave Hansen:
"Add a sysctl to control the split lock misery mode.
This enables users to reduce the penalty inflicted on split lock
users. There are some proprietary, binary-only games which became
entirely unplayable with the old penalty.
Anyone opting into the new mode is, of course, more exposed to the DoS
nasitness inherent with split locks, but they can play their games
again"
* tag 'x86_splitlock_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add sysctl to control the misery mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Dave Hansen:
"These declare the resource control (rectrl) MSRs a bit more normally
and clean up an unnecessary structure member:
- Remove unnecessary arch_has_empty_bitmaps structure memory
- Move rescrtl MSR defines into msr-index.h, like normal MSRs"
* tag 'x86_cache_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Move MSR defines into msr-index.h
x86/resctrl: Remove arch_has_empty_bitmaps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx updates from Dave Hansen:
"This includes a single chunk of new functionality for TDX guests which
allows them to talk to the trusted TDX module software and obtain an
attestation report.
This report can then be used to prove the trustworthiness of the guest
to a third party and get access to things like storage encryption
keys"
* tag 'x86_tdx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/tdx: Test TDX attestation GetReport support
virt: Add TDX guest driver
x86/tdx: Add a wrapper to get TDREPORT0 from the TDX Module
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 sgx updates from Dave Hansen:
"The biggest deal in this series is support for a new hardware feature
that allows enclaves to detect and mitigate single-stepping attacks.
There's also a minor performance tweak and a little piece of the
kmap_atomic() -> kmap_local() transition.
Summary:
- Introduce a new SGX feature (Asynchrounous Exit Notification) for
bare-metal enclaves and KVM guests to mitigate single-step attacks
- Increase batching to speed up enclave release
- Replace kmap/kunmap_atomic() calls"
* tag 'x86_sgx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Replace kmap/kunmap_atomic() calls
KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest
x86/sgx: Allow enclaves to use Asynchrounous Exit Notification
x86/sgx: Reduce delay and interference of enclave release
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes to protect thermal device operations
against thermal device removal, other thermal core fixes and updates
of Intel thermal control drivers.
Specifics:
- Fix race conditions related to thermal device operations that are
not protected against thermal device removal (Guenter Roeck)
- Fix error code in __thermal_cooling_device_register() (Dan
Carpenter)
- Validate new cooling device state (coming from user space) in
cur_state_store() and reuse the max_state value from cooling device
structure in the sysfs interface (Viresh Kumar)
- Fix some possible name leaks in error paths in the thermal control
core code (Yang Yingliang)
- Detect TCC lock bit set in the intel_tcc_cooling driver and make it
refuse to update the TCC offset in that case (Zhang Rui)
- Add TCC cooling support for RaptorLake-S (Zhang Rui)
- Prevent accidental clearing of HFI status by one of the other
drivers using the same status register (Srinivas Pandruvada)
- Protect clearing of thermal status bits in Intel thermal control
drivers (Srinivas Pandruvada)
- Allow the HFI thermal control driver to ACK an HFI event for the
previously observed timestamp (Srinivas Pandruvada)
- Remove a pointless die_id check from the HFI thermal driver and
adjust the definition a data structure used by it (Ricardo Neri)"
* tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: hfi: Remove a pointless die_id check
thermal: core: fix some possible name leaks in error paths
thermal: intel: hfi: ACK HFI for the same timestamp
thermal: intel: Protect clearing of thermal status bits
thermal: intel: Prevent accidental clearing of HFI status
thermal/core: Protect thermal device operations against thermal device removal
thermal/core: Remove thermal_zone_set_trips()
thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex
thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex
thermal/core: Introduce locked version of thermal_zone_device_update
thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp
thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp
thermal/core: Delete device under thermal device zone lock
thermal/core: Destroy thermal zone device mutex in release function
thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S
thermal: intel: intel_tcc_cooling: Detect TCC lock bit
thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages
thermal/core: fix error code in __thermal_cooling_device_register()
thermal: sysfs: Reuse cdev->max_state
thermal: Validate new state in cur_state_store()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and PNP updates from Rafael Wysocki:
"These include new code (for instance, support for the FFH address
space type and support for new firmware data structures in ACPICA),
some new quirks (mostly related to backlight handling and I2C
enumeration), a number of fixes and a fair amount of cleanups all
over.
Specifics:
- Update the ACPICA code in the kernel to the 20221020 upstream
version and fix a couple of issues in it:
- Make acpi_ex_load_op() match upstream implementation (Rafael
Wysocki)
- Add support for loong_arch-specific APICs in MADT (Huacai Chen)
- Add support for fixed PCIe wake event (Huacai Chen)
- Add EBDA pointer sanity checks (Vit Kabele)
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele)
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan)
- Add a couple of new UUIDs to the known UUID list (Bob Moore)
- Add support for FFH Opregion special context data (Sudeep
Holla)
- Improve warning message for "invalid ACPI name" (Bob Moore)
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT
table (Alison Schofield)
- Prepare IORT support for revision E.e (Robin Murphy)
- Finish support for the CDAT table (Bob Moore)
- Fix error code path in acpi_ds_call_control_method() (Rafael
Wysocki)
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li
Zetao)
- Update the version of the ACPICA code in the kernel (Bob Moore)
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti)
- Change the return type of the ACPI driver remove callback to void
and update its users accordingly (Dawei Li)
- Add general support for FFH address space type and implement the
low- level part of it for ARM64 (Sudeep Holla)
- Fix stale comments in the ACPI tables parsing code and make it
print more messages related to MADT (Hanjun Guo, Huacai Chen)
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe
JAILLET, Xu Panda)
- Print full name paths of ACPI power resource objects during
enumeration (Kane Chen)
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla)
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li
Zhong, Colin Ian King, Sudeep Holla)
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi)
- Add some mew ACPI backlight handling quirks and update some
existing ones (Hans de Goede)
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede)
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König)
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel)
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay
Lu)
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede)
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf)
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang
ShaoBo)
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen)
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo)
- Fix the PCC mailbox handling error code path (Huisong Li)
- Avoid using PCC Opregions if there is no platform interrupt
allocated for this purpose (Huisong Li)
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen)
- Fix some kernel-doc issues in the ACPI GSI processing code
(Xiongfeng Wang)
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang)
- Do not disable PNP devices on suspend when they cannot be
re-enabled on resume (Hans de Goede)
- Clean up the ACPI thermal driver a bit (Rafael Wysocki)"
* tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: thermal: Adjust critical.flags.valid check
ACPI: fan: Convert to use sysfs_emit_at() API
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPI: battery: Call power_supply_changed() when adding hooks
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
ACPI: APEI: Remove a useless include
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: PM: Silence missing prototype warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include two new drivers (cpufreq driver for Apple SoC CPU
P-states and the SCMI Powercap based power capping driver), other new
hardware support and driver extensions (Qualcomm cpufreq driver and
its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq),
a bunch of fixes and cleanups all over and a cpupower utility update
including new features related to RAPL support.
Specifics:
- Fix nasty and hard to debug race condition introduced by mistake in
the runtime PM core code and clean up that code somewhat on top of
the fix (Rafael Wysocki)
- Generalize of_perf_domain_get_sharing_cpumask phandle format
(Hector Martin)
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin)
- Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui):
- CPU clock provider support
- Generic cleanups or reorganization
- Potential memleak fix
- Fix of the return value of cpufreq_driver->get()
- Update Qualcomm cpufreq driver's DT bindings (Manivannan
Sadhasivam, Rob Herring, Melody Olvera):
- Support for CPU clock provider
- Missing cache-related properties fixes
- Support for QDU1000/QRU1000
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan)
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET)
- Convert cpufreq statistics code to use sysfs_emit_at() (ye
xingchen)
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich)
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq
driver (Xiongfeng Wang)
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu)
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor)
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada)
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King)
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King)
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko)
- Drop a reference to CVS from cpufreq documentation (Conghui Wang)
- Improve kernel messages printed by the PSCI cpuidle driver (Ulf
Hansson)
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson)
- Modify the tasks freezing code to avoid using pr_cont() and refine
an error message printed by it (Rafael Wysocki)
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo)
- Fix mistake in a kerneldoc comment in the hibernation code
(xiongxin)
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa)
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in
the generic power domains code (Abel Vesa)
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo)
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo)
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo)
- Fix compiler warnings with make W=1 in the idle_inject power
capping driver (Srinivas Pandruvada)
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET)
- Add SCMI Powercap based power capping driver (Cristian Marussi)
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy)
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn)
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar)
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt
properties to be present without the others present (James
Calligeros)
- Fix clock-latency-ns property in DT example (Serge Semin)
- Add a private governor_data for devfreq governors (Kant Fan)
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi)
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar)
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli)
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger)"
* tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
PM: runtime: Adjust white space in the core code
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: runtime: Relocate rpm_callback() right after __rpm_callback()
PM: runtime: Do not call __rpm_callback() from rpm_idle()
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
powercap: idle_inject: Fix warnings with make W=1
PM: hibernate: Complain about memory map mismatches during resume
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
...
|
|
Currently the KTAP specification says that a test result line is
<result> <number> [<description>][ # [<directive>] [<diagnostic data>]]
and the description of a test can be "any sequence of words
(can't include #)" which specifies that there may be more than
one word but does not specify anything other than those words
which might be used to separate the words which probably isn't
what we want. Given that practically we have tests using a range
of separators for words including combinations of spaces and
combinations of other symbols like underscores or punctuation
let's just clarify that the description can contain any character
other than # (marking the start of the directive/diagnostic) or
newline (marking the end of this test result).
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use macros, VISIBLE_IF_KUNIT and EXPORT_SYMBOL_IF_KUNIT, to allow
static symbols to be conditionally set to be visible during
apparmor_policy_unpack_test, which removes the need to include the testing
file in the implementation file.
Change the namespace of the symbols that are now conditionally visible (by
adding the prefix aa_) to avoid confusion with symbols of the same name.
Allow the test to be built as a module and namespace the module name from
policy_unpack_test to apparmor_policy_unpack_test to improve clarity of
the module name.
Provide an example of how static symbols can be dealt with in testing.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Create two macros:
VISIBLE_IF_KUNIT - A macro that sets symbols to be static if CONFIG_KUNIT
is not enabled. Otherwise if CONFIG_KUNIT is enabled there is no change to
the symbol definition.
EXPORT_SYMBOL_IF_KUNIT(symbol) - Exports symbol into
EXPORTED_FOR_KUNIT_TESTING namespace only if CONFIG_KUNIT is enabled. Must
use MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING) in test file in order to
use symbols.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, kunit_parser.py is stripping all leading whitespace to make
parsing easier. But this means we can't accurately show kernel output
for failing tests or when the kernel crashes.
Embarassingly, this affects even KUnit's own output, e.g.
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] not ok 1 example_simple_test
[13:40:46] [FAILED] example_simple_test
After this change, here's what the output in context would look like
[13:40:46] =================== example (4 subtests) ===================
[13:40:46] # example_simple_test: initializing
[13:40:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:40:46] Expected 2 + 1 == 2, but
[13:40:46] 2 + 1 == 3 (0x3)
[13:40:46] [FAILED] example_simple_test
[13:40:46] [SKIPPED] example_skip_test
[13:40:46] [SKIPPED] example_mark_skipped_test
[13:40:46] [PASSED] example_all_expect_macros_test
[13:40:46] # example: initializing suite
[13:40:46] # example: pass:1 fail:1 skip:2 total:4
[13:40:46] # Totals: pass:1 fail:1 skip:2 total:4
[13:40:46] ===================== [FAILED] example =====================
This example shows one minor cosmetic defect this approach has.
The test counts lines prevent us from dedenting the suite-level output.
But at the same time, any form of non-KUnit output would do the same
unless it happened to be indented as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The "How Do I Use This" section of index.rst and "Next Steps" section of
start.rst were just copies of the table of contents, and therefore
weren't really useful either when looking a sphinx generated output
(which already had the TOC visible) or when reading the source (where
it's just a list of files that ls could give you).
Instead, provide a small number of concrete next steps, and a bit more
description about what the pages contain.
This also removes the broken reference to 'tips.rst', which was
previously removed.
Fixed git am whitespace complaints during commit:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 4399c737a97d ("Documentation: kunit: Remove redundant 'tips.rst' page")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We print the "test log" on failure.
This is meant to be all the kernel output that happened during the test.
But we also include the special KTAP lines in it, which are often
redundant.
E.g. we include the "not ok" line in the log, right before we print
that the test case failed...
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] not ok 1 example_simple_test
[13:51:48] [FAILED] example_simple_test
More full example after this patch:
[13:51:48] =================== example (4 subtests) ===================
[13:51:48] # example_simple_test: initializing
[13:51:48] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29
[13:51:48] Expected 2 + 1 == 2, but
[13:51:48] 2 + 1 == 3 (0x3)
[13:51:48] [FAILED] example_simple_test
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Change KUnit test output to better comply with KTAP v1 specifications
found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html.
1) Use "KTAP version 1" instead of "TAP version 14" as test output header
2) Remove '-' between test number and test name on test result lines
2) Add KTAP version lines to each subtest header as well
Note that the new KUnit output still includes the “# Subtest” line now
located after the KTAP version line. This does not completely match the
KTAP v1 spec but since it is classified as a diagnostic line, it is not
expected to be disruptive or break any existing parsers. This
“# Subtest” line comes from the TAP 14 spec
(https://testanything.org/tap-version-14-specification.html) and it is
used to define the test name before the results.
Original output:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
New output:
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Change the KUnit parser to be able to parse test output that complies with
the KTAP version 1 specification format found here:
https://kernel.org/doc/html/latest/dev-tools/ktap.html. Ensure the parser
is able to parse tests with the original KUnit test output format as
well.
KUnit parser now accepts any of the following test output formats:
Original KUnit test output format:
TAP version 14
1..1
# Subtest: kunit-test-suite
1..3
ok 1 - kunit_test_1
ok 2 - kunit_test_2
ok 3 - kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 - kunit-test-suite
KTAP version 1 test output format:
KTAP version 1
1..1
KTAP version 1
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
ok 1 kunit-test-suite
New KUnit test output format (changes made in the next patch of
this series):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit-test-suite
1..3
ok 1 kunit_test_1
ok 2 kunit_test_2
ok 3 kunit_test_3
# kunit-test-suite: pass:3 fail:0 skip:0 total:3
# Totals: pass:3 fail:0 skip:0 total:3
ok 1 kunit-test-suite
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Use the newly-added function kunit_get_current_test() instead of
accessing current->kunit_test directly. This function uses a static key
to return more quickly when KUnit is enabled, but no tests are actively
running. There should therefore be a negligible performance impact to
enabling the slub KUnit tests.
Other than the performance improvement, this should be a no-op.
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In order to detect if a KUnit test is running, and to access its
context, the 'kunit_test' member of the current task_struct is used.
Usually, this is accessed directly or via the kunit_fail_current_task()
function.
In order to speed up the case where no test is running, add a wrapper,
kunit_get_current_test(), which uses the static key to fail early.
Equally, Speed up kunit_fail_current_test() by using the static key.
This should make it convenient for code to call this
unconditionally in fakes or error paths, without worrying that this will
slow the code down significantly.
If CONFIG_KUNIT=n (or m), this compiles away to nothing. If
CONFIG_KUNIT=y, it will compile down to a NOP (on most architectures) if
no KUnit test is currently running.
Note that kunit_get_current_test() does not work if KUnit is built as a
module. This mirrors the existing restriction on kunit_fail_current_test().
Note that the definition of kunit_fail_current_test() still wraps an
empty, inline function if KUnit is not built-in. This is to ensure that
the printf format string __attribute__ will still work.
Also update the documentation to suggest users use the new
kunit_get_current_test() function, update the example, and to describe
the behaviour when KUnit is disabled better.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
KUnit does a few expensive things when enabled. This hasn't been a
problem because KUnit was only enabled on test kernels, but with a few
people enabling (but not _using_) KUnit on production systems, we need a
runtime way of handling this.
Provide a 'kunit_running' static key (defaulting to false), which allows
us to hide any KUnit code behind a static branch. This should reduce the
performance impact (on other code) of having KUnit enabled to a single
NOP when no tests are running.
Note that, while it looks unintuitive, tests always run entirely within
__kunit_test_suites_init(), so it's safe to decrement the static key at
the end of this function, rather than in __kunit_test_suites_exit(),
which is only there to clean up results in debugfs.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When --raw_output is set (to any value), we don't actually parse the
test results. So asking to print the test results as json doesn't make
sense.
We internally create a fake test with one passing subtest, so --json
would actually print out something misleading.
This patch:
* Rewords the flag descriptions so hopefully this is more obvious.
* Also updates --raw_output's description to note the default behavior
is to print out only "KUnit" results (actually any KTAP results)
* also renames and refactors some related logic for clarity (e.g.
test_result => test, it's a kunit_parser.Test object).
Notably, this patch does not make it an error to specify --json and
--raw_output together. This is an edge case, but I know of at least one
wrapper around kunit.py that always sets --json. You'd never be able to
use --raw_output with that wrapper.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We currently tell people we "couldn't find any KTAP output" with no
indication as to what this might mean.
After this patch, we get:
$ ./tools/testing/kunit/kunit.py parse /dev/null
============================================================
[ERROR] Test: <missing>: Could not find any KTAP output. Did any KUnit tests run?
============================================================
Testing complete. Ran 0 tests: errors: 1
Note: we could try and generate a more verbose message like
> Please check .kunit/test.log to see the raw kernel output.
or the like, but we'd need to know what the build dir was to know where
test.log actually lives.
This patch tries to make a more minimal improvement.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 870f63b7cd78 ("kunit: eliminate KUNIT_INIT_*_ASSERT_STRUCT
macros") removed all the other macros of this type.
But it raced with commit b8a926bea8b1 ("kunit: Introduce
KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros"), which added another
instance.
Remove KUNIT_INIT_MEM_ASSERTION and just use the generic
KUNIT_INIT_ASSERT macro instead.
Rename the `size` arg to avoid conflicts by appending a "_" (like we did
in the previous commit).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The contents of 'tips.rst' was mostly included in 'usage.rst' way back in
commit 953574390634 ("Documentation: KUnit: Rework writing page to focus on writing tests"),
but the tips page remained behind as well.
The parent patches in this series fill in the gaps, so now 'tips.rst' is
redundant.
Therefore, delete 'tips.rst'.
While I regret breaking any links to 'tips' which might exist
externally, it's confusing to have two subtly different versions of the
same content around.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The existing wording implies that kunit_kmalloc_array() is "the method
under test". We're actually testing the sort() function in that example.
This is because the example was changed in commit 953574390634
("Documentation: KUnit: Rework writing page to focus on writing tests"),
but the wording was not.
Also add a `note` telling people they can use the KUNIT_ASSERT_EQ()
macros from any function. Some users might be coming from a framework
like gUnit where that'll compile but silently do the wrong thing.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
usage.rst had most of the content of the tips.rst page copied over.
But it's missing https://www.kernel.org/doc/html/v6.0/dev-tools/kunit/tips.html#customizing-error-messages
Copy it over so we can retire tips.rst w/o losing content.
And in that process, it also gained a duplicate section about how
KUNIT_ASSERT_*() exit the test case early. Remove that.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Sadiya Kazi <sadiyakazi@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
These macros exist because passing an initializer list to other macros
is hard.
The goal of these macros is to generate a line like
struct $ASSERT_TYPE __assertion = $APPROPRIATE_INITIALIZER;
e.g.
struct kunit_unary_assertion __assertion = {
.condition = "foo()",
.expected_true = true
};
But the challenge is you can't pass `{.condition=..., .expect_true=...}`
as a macro argument, since the comma means you're actually passing two
arguments, `{.condition=...` and `.expect_true=....}`.
So we'd made custom macros for each different initializer-list shape.
But we can work around this with the following generic macro
#define KUNIT_INIT_ASSERT(initializers...) { initializers }
Note: this has the downside that we have to rename some macros arguments
to not conflict with the struct field names (e.g. `expected_true`).
It's a bit gross, but probably worth reducing the # of macros.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We're using a `with` block above, so the file object is already closed.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Let's verify that the parser isn't reporting any errors for valid
inputs.
This change also
* does result.status checking on one line
* makes sure we consistently do it outside of the `with` block
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since we're using Python 3.7+, we can use dataclasses to tersen the
code.
It also lets us create pre-populated TestCounts() objects and compare
them in our unit test. (Before, you could only create empty ones).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|