Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- Support for fanotify events returning file handles for filesystems
not exportable via NFS
- Improved error handling exportfs functions
- Add missing FS_OPEN events when unusual open helpers are used
* tag 'fsnotify_for_v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: move fsnotify_open() hook into do_dentry_open()
exportfs: check for error return value from exportfs_encode_*()
fanotify: support reporting non-decodeable file handles
exportfs: allow exporting non-decodeable file handles to userspace
exportfs: add explicit flag to request non-decodeable file handles
exportfs: change connectable argument to bit flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"The dlm posix lock handling (for gfs2) has three notable changes:
- Local pids returned from GETLK are no longer negated. A previous
patch negating remote pids mistakenly changed local pids also.
- SETLKW operations can now be interrupted only when the process is
killed, and not from other signals. General interruption was
resulting in previously acquired locks being cleared, not just the
in-progress lock. Handling this correctly will require extending a
cancel capability to user space (a future feature.)
- If multiple threads are requesting posix locks (with SETLKW), fix
incorrect matching of results to the requests.
The dlm networking has several minor cleanups, and one notable change:
- Avoid delaying ack messages for too long (used for message
reliability), resulting in a backlog of un-acked messages. These
could previously be delayed as a result of either too many or too
few other messages being sent. Now an upper and lower threshold is
used to determine when an ack should be sent"
* tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: remove filter local comms on close
fs: dlm: add send ack threshold and append acks to msgs
fs: dlm: handle sequence numbers as atomic
fs: dlm: handle lkb wait count as atomic_t
fs: dlm: filter ourself midcomms calls
fs: dlm: warn about messages from left nodes
fs: dlm: move dlm_purge_lkb_callbacks to user module
fs: dlm: cleanup STOP_IO bitflag set when stop io
fs: dlm: don't check othercon twice
fs: dlm: unregister memory at the very last
fs: dlm: fix missing pending to false
fs: dlm: clear pending bit when queue was empty
fs: dlm: revert check required context while close
fs: dlm: fix mismatch of plock results from userspace
fs: dlm: make F_SETLK use unkillable wait_event
fs: dlm: interrupt posix locks only when process is killed
fs: dlm: fix cleanup pending ops when interrupted
fs: dlm: return positive pid value for F_GETLK
dlm: Replace all non-returning strlcpy with strscpy
|
|
Pull xfs updates from Darrick Wong:
"There's not much going on this cycle -- the large extent counts
feature graduated, so now users can create more extremely fragmented
files! :P
The rest are bug fixes; and I'll be sending more next week.
- Fix a problem where shrink would blow out the space reserve by
declining to shrink the filesystem
- Drop the EXPERIMENTAL tag for the large extent counts feature
- Set FMODE_CAN_ODIRECT and get rid of an address space op
- Fix an AG count overflow bug in growfs if the new device size is
redonkulously large"
* tag 'xfs-6.5-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix ag count overflow during growfs
xfs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
xfs: drop EXPERIMENTAL tag for large extent counts
xfs: don't deplete the reserve pool when trying to shrink the fs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Various cleanups and bug fixes in ext4's extent status tree,
journalling, and block allocator subsystems.
Also improve performance for parallel DIO overwrites"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (55 commits)
ext4: avoid updating the superblock on a r/o mount if not needed
jbd2: skip reading super block if it has been verified
ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
ext4: refactoring to use the unified helper ext4_quotas_off()
ext4: turn quotas off if mount failed after enabling quotas
ext4: update doc about journal superblock description
ext4: add journal cycled recording support
jbd2: continue to record log between each mount
jbd2: remove j_format_version
jbd2: factor out journal initialization from journal_get_superblock()
jbd2: switch to check format version in superblock directly
jbd2: remove unused feature macros
ext4: ext4_put_super: Remove redundant checking for 'sbi->s_journal_bdev'
ext4: Fix reusing stale buffer heads from last failed mounting
ext4: allow concurrent unaligned dio overwrites
ext4: clean up mballoc criteria comments
ext4: make ext4_zeroout_es() return void
ext4: make ext4_es_insert_extent() return void
ext4: make ext4_es_insert_delayed_block() return void
ext4: make ext4_es_remove_extent() return void
...
|
|
Pull jfs updates from David Kleikamp:
"Minor bug fixes and cleanups"
* tag 'jfs-6.5' of github.com:kleikamp/linux-shaggy:
FS: JFS: Check for read-only mounted filesystem in txBegin
FS: JFS: Fix null-ptr-deref Read in txBegin
fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev
fs: jfs: (trivial) Fix typo in dbInitTree function
jfs: jfs_dmap: Validate db_l2nbperpage while mounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Amir Goldstein:
- fix two NULL pointer deref bugs (Zhihao Cheng)
- add support for "data-only" lower layers destined to be used by
composefs
- port overlayfs to the new mount api (Christian Brauner)
* tag 'ovl-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: (26 commits)
ovl: add Amir as co-maintainer
ovl: reserve ability to reconfigure mount options with new mount api
ovl: modify layer parameter parsing
ovl: port to new mount api
ovl: factor out ovl_parse_options() helper
ovl: store enum redirect_mode in config instead of a string
ovl: pass ovl_fs to xino helpers
ovl: clarify ovl_get_root() semantics
ovl: negate the ofs->share_whiteout boolean
ovl: check type and offset of struct vfsmount in ovl_entry
ovl: implement lazy lookup of lowerdata in data-only layers
ovl: prepare for lazy lookup of lowerdata inode
ovl: prepare to store lowerdata redirect for lazy lowerdata lookup
ovl: implement lookup in data-only layers
ovl: introduce data-only lower layers
ovl: remove unneeded goto instructions
ovl: deduplicate lowerdata and lowerstack[]
ovl: deduplicate lowerpath and lowerstack[]
ovl: move ovl_entry into ovl_inode
ovl: factor out ovl_free_entry() and ovl_stack_*() helpers
...
|
|
In commit a425ac5365f6 ("gup: add warning if some caller would seem to
want stack expansion") I added a temporary warning to catch any strange
GUP users that would be impacted by the fact that GUP no longer extends
the stack.
But it turns out that the warning is most easily triggered through
__access_remote_vm(), that already knows to expand the stack - it just
does it *after* calling GUP. So the warning is easy to trigger by just
running gdb (or similar) and accessing things remotely under the stack.
This just adds a temporary extra "expand stack early" to avoid the
warning for the already converted case - not because the warning is bad,
but because getting the warning for this known good case would then hide
any subsequent warnings for any actually interesting cases.
Let's try to remember to revert this change when we remove the warnings.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Olga Kornievskaia reports that this patch breaks NFSv4.0 state recovery.
It also introduces additional complexity in the error paths for cases not
related to the original problem. Let's revert it for now, and address the
original problem in another manner.
This reverts commit f5ea16137a3fa2858620dc9084466491c128535f.
Fixes: f5ea16137a3f ("NFSv4: Retry LOCK on OLD_STATEID during delegation return")
Reported-by: Kornievskaia, Olga <Olga.Kornievskaia@netapp.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Its possible to end up in nfs_free_server() before the server's superblock
sysfs entry has been initialized, in which case calling kobject_put() will
emit a WARNING. Check if the kobject has been initialized before cleaning
it up.
Fixes: 1c7251187dc0 ("NFS: add superblock sysfs entries")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes as usual, but the only significant stuff in ALSA core
part is the MIDI 2.0 support, while ASoC core kept receiving the code
refactoring. The majority of changes are seen rather in device
drivers, and quite a few new drivers can be found there.
Here we go, some highlights:
ALSA and ASoC Core:
- Support of MIDI 2.0 devices: rawmidi and sequencer API have been
extended for the support of the new UMP (Universal MIDI Packet)
protocol, USB audio driver got the USB MIDI 2.0 interface support
- Continued refactoring around ASoC DAI links and the ordering of
trigger callbacks
- PCM ABI extension for better drain support
ASoC Drivers:
- Conversions of many drivers to use maple tree based caches
- Everlasting improvement works on ASoC Intel drivers
- Compressed audio support for Qualcomm
- Support for AMD SoundWire, Analog Devices SSM3515, Google
Chameleon, Ingenic X1000, Intel systems with various CODECs,
Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
JH7110, Texas Instruments TAS2781
HD-audio:
- Quirks for HP and ASUS machines
- CS35L41 HD-audio codec fixes
- Loongson HD-audio support
Misc:
- A new virtual PCM test driver for kselftests
- Continued refactoring and improvements on the legacy emu10k1
driver"
* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
ASoC: hdmi-codec: fix channel info for compressed formats
ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
ASoC: core: Always store of_node when getting DAI link component
ASoC: tas2781: Fix error code in tas2781_load_calibration()
ASoC: amd: update pm_runtime enable sequence
ALSA: ump: Export MIDI1 / UMP conversion helpers
ASoC: tas2781: fix Kconfig dependencies
ASoC: amd: acp: remove acp poweroff function
ASoC: amd: acp: clear pdm dma interrupt mask
ASoC: codecs: max98090: Allow dsp_a mode
ASoC: qcom: common: add default jack dapm pins
ASoC: loongson: fix address space confusion
ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
ASoC: tegra: Remove stale comments in AHUB
ASoC: tegra: Use normal system sleep for ASRC
ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
ASoC: fsl-asoc-card: Allow passing the number of slots in use
ASoC: codecs: wsa884x: Add WSA884x family of speakers
ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- improvements to PS/2 handling for case when EC has already latched a
scancode in the data register, but the kernel expects to receive an
ACK to a command it sent to a device (such as keyboard LED toggle)
- input drivers for devices connected over I2C bus have been switched
back to using [new] .probe()
- uinput allows userspace to inject timestamps for input events
- support for capacitive keys in Atmel touch controller driver
- assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other
drivers
* tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
Input: pm8941-powerkey - fix debounce on gen2+ PMICs
MAINTAINERS: Adjust Qualcomm driver globbing
Input: gameport - provide default trigger() and read()
Input: tps65219-pwrbutton - use regmap_set_bits()
Input: tps65219-pwrbutton - convert to .remove_new()
Input: tests - add test to cover all input_grab_device() function
Input: gpio-keys - use input_report_key()
Input: xpad - spelling fixes for "Xbox"
Input: add HAS_IOPORT dependencies
Input: libps2 - do not discard non-ack bytes when controlling LEDs
Input: libps2 - introduce common interrupt handler
Input: libps2 - fix aborting PS/2 commands
Input: libps2 - fix NAK handling
Input: libps2 - rework handling of command response
Input: libps2 - remove special handling of ACK for command byte
Input: libps2 - attach ps2dev instances as serio port's drvdata
Input: Switch i2c drivers back to use .probe()
dt-bindings: input: cypress,cyapa: convert to dtschema
Input: adxl34x - do not hardcode interrupt trigger type
Input: pwm-vibra - add support for enable GPIO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- more bullet-proof handling of devres-managed resources in HID core
(Dmitry Torokhov)
- conversion of hid-wacom to use ktime_t (Jason Gerecke)
- touch selftests for hid-wacom (Joshua Dickens)
- support for nVidia Thunderstrike (SHIELD 2017) controller (Rahul
Rameshbabu)
- power management reset-during-suspend fix for goodix Chromebook
devices (Fei Shao)
- assorted device ID additions, device-specific quirks and code
cleanups
* tag 'for-linus-2023062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: wacom: Use ktime_t rather than int when dealing with timestamps
HID: hidraw: fix data race on device refcount
HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
HID: logitech-hidpp: add HIDPP_QUIRK_DELAYED_INIT for the T651.
HID: add quirk for 03f0:464a HP Elite Presenter Mouse
HID: nvidia-shield: Support LED functionality for Thunderstrike
HID: nvidia-shield: Add mappings for consumer HID USAGE buttons
HID: nvidia-shield: Initial driver implementation with Thunderstrike support
HID: apple: Option to swap only left side mod keys
HID: uclogic: Modular KUnit tests should not depend on KUNIT=y
HID: fix an error code in hid_check_device_match()
HID: logitech-hidpp: Add USB and Bluetooth IDs for the Logitech G915 TKL Keyboard
HID: i2c-hid: Switch i2c drivers back to use .probe()
HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend" property
dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property
HID: microsoft: Add rumble support to latest xbox controllers
selftests: hid: Add touch tests for Wacom devices
HID: ensure timely release of driver-allocated resources
HID: split apart hid_device_probe to make logic more apparent
HID: amd_sfh: Split sensor and HID initialization for SFH1.1
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Some fbdev fixes & cleanups.
Includes is a fix for a potential out-of-bound memory access
in fast_imageblit() and the switch of the VIA fbdev driver to
use GPIO descriptors.
Summary:
- fix potential OOB read in fast_imageblit()
- fbdev/media: Use GPIO descriptors for VIA GPIO
- broadsheetfb & metronomefb: Add MODULE_FIRMWARE macro
- omapfb: error handling fix in mipid_spi_probe()
- sh_mobile_lcdcfb, sh7760fb: Typo and warning fixes
- hitfb: code cleanups"
* tag 'fbdev-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fix potential OOB read in fast_imageblit()
MAINTAINERS: adjust entry in VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
fbdev: sh7760fb: Fix -Wimplicit-fallthrough warnings
fbdev: sh_mobile_lcdcfb: Fix ARGB32 overlay format typo
fbdev: hitfb: Use NULL for pointers
fbdev: hitfb: Fix integer-to-pointer cast
fbdev/media: Use GPIO descriptors for VIA GPIO
video/hdmi: Reorder fields in 'struct hdmi_avi_infoframe'
fbdev: broadsheetfb: Add MODULE_FIRMWARE macro
fbdev: metronomefb: Add MODULE_FIRMWARE macro
fbdev: hitfb: Declare hitfb_blank() as static
fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have two new drivers, some improvements to the core code, lots of
different updates to existing GPIO drivers and some dt-bindings on
top.
There's nothing controversial in here and almost everything has been
in next for more than a week (95% a lot longer than this). The only
thing that has spent less time in next is a new driver so no risk of
regressions.
The single merge pulls in changes that remove all usage of global GPIO
numbers from arch/arm/mach-omap.
Core GPIO library:
- remove unused symbols
- don't spam the kernel log with messages about hogs
- remove old sysfs API cruft
- improve handling of GPIO masks
New drivers:
- add a driver for the BlueField-3 GPIO controller
- add GPIO support for the TPS65219 PMIC
Driver improvements:
- extend the gpio-aggregator driver to support ramp-up/ramp-down
delay
- remove unnecessary CONFIG_OF guards from gpio-aggregator
- readability improvements in gpio-tangier
- switch i2c drivers back to using probe() now that it's been
converted in the i2c subsystem to not taking the id parameter
- remove unused inclusions of of_gpio.h in several drivers
- make pm ops static in gpio-davinci and fix a comment
- use more devres in drivers to shrink and simplify the code
- add missing include in gpio-sa1100
- add HAS_IOPORT KConfig dependency where needed
- add permissions checks before accessing pins in gpio-tegra186
- convert the gpio-zynq driver to using immutable irqchips
- preserve output settings set by the bootloader in gpio-mpc8xxx
Selftests:
- tweak the variable naming in script tests
Device tree updates:
- convert gpio-mmio and gpio-stmpe to YAML
- add parsing of GPIO hogs to gpio-vf610
- add bindings for the Cirrus EP93xx GPIO controller
- add gpio-line-names property to the gpio-pca9570 bindings
- extend the binding for x-powers,axp209 with another block"
* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
of: unittest: drop assertions for GPIO hog messages
gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
dt-bindings: gpio: gpio-vf610: Add parsing of hogs
gpio: lpc18xx: Remove unused of_gpio.h inclusion
gpio: xra1403: Remove unused of_gpio.h inclusion
gpio: mpc8xxx: Remove unused of_gpio.h inclusion
dt-bindings: gpio: Add Cirrus EP93xx
gpio: mpc8xxx: latch GPIOs state on module load when configured as output
selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
gpio: mlxbf3: Add gpio driver support
gpio: delay: Remove duplicative functionality
gpio: aggregator: Set up a parser of delay line parameters
gpio: aggregator: Support delay for setting up individual GPIOs
gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
dt-bindings: gpio: pca9570: add gpio-line-names property
gpiolib: remove unused gpio_cansleep()
gpio: tps65219: add GPIO support for TPS65219 PMIC
gpio: zynq: fix zynqmp_gpio not an immutable chip warning
gpio: davinci: make davinci_gpio_dev_pm_ops static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.
Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.
Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.
In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.
Core:
- Make clk_ops::determine_rate mandatory for muxes
New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support
Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31827
- Driver to support HP WMI Sensors
Added support to existing drivers:
- aht10: Support for AHT20
- aquacomputer_d5next: Support for Aquacomputer Leakshield
- asus-ec-sensors: Support for ROG Crosshair X670E Hero
- corsair-psu: Cleanups and support for series 2022 and 2023
- it87: Various improvements and support for IT8732F
- nct6683: Support customer ID of some MSI boards.
- nct6755: Support for NCT6799D
- oxp-sensors: Various cleanups; support for AYANEO 2, Geek, OXP
Mini, and AOKZOE A1 PRO
- pmbus/max16601: Support for new revisions of MAX16508
- pmbus/adm1275: Disable ADC while updating PMON_CONFIG, and fix
problems with temperature monitoring on ADM1272
- sht3x: Various cleanups; support for medium repeatability
Other notable changes:
- Switched regmap drivers to Maple tree support where appropriate
Various other minor fixes and improvements"
* tag 'hwmon-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
hwmon: max31827: Switch back to use struct i2c_driver::probe
hwmon: (oxp-sensors) Add support for AOKZOE A1 PRO
hwmon: (corsair-psu) update Series 2022 and 2023 support
hwmon: (corsair-psu) various cleanups
hwmon: (corsair-psu) add support for reading PWM values and mode
hwmon: (pmbus/adm1275) Disable ADC while updating PMON_CONFIG
hwmon: (pmbus/adm1275) Prepare for protected write to PMON_CONFIG
hwmon: (oxp-sensors) Simplify logic of error return
hwmon: (oxp-sensors) Remove unused header
hwmon: (nct6755) Add support for NCT6799D
hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards
hwmon: (sht3x) complement sysfs interface for sts3x
hwmon: (sht3x) Add new non-stardard sysfs attribute
hwmon: (sht3x) add medium repeatability support
hwmon: (sht3x)replace "high-precision" property to "repeatability"
hwmon: (sht3x) remove blocking_io property
hwmon: (sht3x) remove sht3x_platform_data
hwmon: (pmbus/max16601) Add support for new revisions of MAX16508
Documentation/hwmon: Fix description of devm_hwmon_device_unregister()
hwmon: (tmp464) Use maple tree register cache
...
|
|
There is no xas_pause(&xas) in collapse_file()'s main loop, at the points
where it does xas_unlock_irq(&xas) and then continues.
That would explain why, once two weeks ago and twice yesterday, I have
hit the VM_BUG_ON_PAGE(page != xas_load(&xas), page) since "mm/khugepaged:
fix iteration in collapse_file" removed the xas_set(&xas, index) just
before it: xas.xa_node could be left pointing to a stale node, if there
was concurrent activity on the file which transformed its xarray.
I tried inserting xas_pause()s, but then even bootup crashed on that
VM_BUG_ON_PAGE(): there appears to be a subtle "nextness" implicit in
xas_pause().
xas_next() and xas_pause() are good for use in simple loops, but not in
this one: xas_set() worked well until now, so use xas_set(&xas, index)
explicitly at the head of the loop; and change that VM_BUG_ON_PAGE() not
to need its own xas_set(), and not to interfere with the xa_state (which
would probably stop the crashes from xas_pause(), but I trust that less).
The user-visible effects of this bug (if VM_BUG_ONs are configured out)
would be data loss and data leak - potentially - though in practice I
expect it is more likely that a subsequent check (e.g. on mapping or on
nr_none) would notice an inconsistency, and just abandon the collapse.
Link: https://lore.kernel.org/linux-mm/f18e4b64-3f88-a8ab-56cc-d1f5f9c58d4@google.com/
Fixes: c8a8f3b4a95a ("mm/khugepaged: fix iteration in collapse_file")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Stevens <stevensd@chromium.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As Darrick prefers to micro-manage this without looking at my input
for code I wrote and then complain about getting burned out by that
I might as well drop myself from the maintainers file.
[djwong: and I don't like it when you all bikeshed a single-patch
submission to the point that new bugs are being introduced in the scope
creep that wasn't part of V1-V7!]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
iomap_file_buffered_write_punch_delalloc
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
It is perfectly valid to not find session not found errors
when a reconnect of a session happens when requests for the
same session are happening in parallel.
We had these log messages as VFS logs. My last change dumped
these logs as FYI logs.
This change just creates a new dynamic tracepoint to capture
events of this type, just in case it is useful while
debugging issues in the future.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We do not log the session id in crypt_setup when a matching
session is not found. Printing the session id helps debugging
here. This change does just that.
This change also changes this log to FYI, since it is normal to
see then during a reconnect. Doing the same for a similar log
in case of signed connections.
The plan is to have a tracepoint for this event, so that we will
be able to see this event if need be. That will be done as
another change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For now, DIE_PAGE_FAULT, DIE_BREAK, DIE_SSTEPBP, DIE_UPROBE and
DIE_UPROBE_XOL are not used by any code, remove them.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Suggested-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Uprobes is the user-space counterpart to kprobes, this patch adds
uprobes support for LoongArch.
Here is a simple example with CONFIG_UPROBE_EVENTS=y:
# cat test.c
#include <stdio.h>
int add(int a, int b)
{
return a + b;
}
int main()
{
return add(2, 7);
}
# gcc test.c -o /tmp/test
# nm /tmp/test | grep add
0000000120004194 T add
# cd /sys/kernel/debug/tracing
# echo > uprobe_events
# echo "p:myuprobe /tmp/test:0x4194 %r4 %r5" > uprobe_events
# echo "r:myuretprobe /tmp/test:0x4194 %r4" >> uprobe_events
# echo 1 > events/uprobes/enable
# echo 1 > tracing_on
# /tmp/test
# cat trace
...
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
test-1060 [001] DNZff 1015.770620: myuprobe: (0x120004194) arg1=0x2 arg2=0x7
test-1060 [001] DNZff 1015.770930: myuretprobe: (0x1200041f0 <- 0x120004194) arg1=0x9
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
For now, we can use larch_insn_gen_break() to define KPROBE_BP_INSN and
KPROBE_SSTEPBP_INSN. Because larch_insn_gen_break() returns instruction
word, define kprobe_opcode_t as u32, then do some small changes related
with type conversion, no functional change intended.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There exist various break insns such as BRK_KPROBE_BP, BRK_KPROBE_SSTEPBP,
BRK_UPROBE_BP and BRK_UPROBE_XOLBP, add larch_insn_gen_break() to generate
break insns simpler, this is preparation for later patch.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like llsc instructions, the atomic memory access instructions shouldn't
be supported for probing, so check for them in insns_not_supported().
Closes: https://lore.kernel.org/all/SY4P282MB351877A70A0333C790FE85A5C09C9@SY4P282MB3518.AUSP282.PROD.OUTLOOK.COM/
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The three functions insns_not_supported(), insns_need_simulation() and
arch_simulate_insn() will be used for uprobes, move them from kprobes.c
to inst.c, this is preparation for later patch, no functionality change.
Tested-by: Jeff Xie <xiehuan09@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is an adaptation of commit f3a112c0c40d ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") and commit b57c2f124098 ("riscv:
add riscv rethook implementation") to LoongArch. Mainly refer to commit
b57c2f124098 ("riscv: add riscv rethook implementation").
Replaces the kretprobe code with rethook on LoongArch. With this patch,
kretprobe on LoongArch uses the rethook instead of kretprobe specific
trampoline code.
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add support for jump labels based on the ARM64 version.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see that DEBUG_KMEMLEAK depends on HAVE_DEBUG_KMEMLEAK after
commit b69ec42b1b19 ("Kconfig: clean up the long arch list for the
DEBUG_KMEMLEAK config option"), just select HAVE_DEBUG_KMEMLEAK to
support kmemleak on LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some PMC (Power Management Controllers) need to support DTS and will use
the suspend interfaces thus this patch was to export such interfaces for
their use.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson-3A6000 and newer processors have hardware page table walker
(PTW) support. PTW can handle all fastpaths of TLBI/TLBL/TLBS/TLBM
exceptions by hardware, software only need to handle slowpaths (page
faults).
BTW, PTW doesn't append _PAGE_MODIFIED for page table entries, so we
change pmd_dirty() and pte_dirty() to also check _PAGE_DIRTY for the
"dirty" attribute.
Signed-off-by: Liang Gao <gaoliang@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Traditionally, LoongArch uses "dbar 0" (full completion barrier) for
everything. But the full completion barrier is a performance killer, so
Loongson-3A6000 and newer processors have made finer granularity hints
available:
Bit4: ordering or completion (0: completion, 1: ordering)
Bit3: barrier for previous read (0: true, 1: false)
Bit2: barrier for previous write (0: true, 1: false)
Bit1: barrier for succeeding read (0: true, 1: false)
Bit0: barrier for succeeding write (0: true, 1: false)
Hint 0x700: barrier for "read after read" from the same address, which
is needed by LL-SC loops on old models (dbar 0x700 behaves the same as
nop if such reordering is disabled on new models).
This patch makes use of the various new hints for different kinds of
memory barriers. It brings performance improvements on Loongson-3A6000
series, while not affecting the existing models because all variants are
treated as 'dbar 0' there.
Why override queued_spin_unlock()?
After commit 01e3b958efe85a26d9b ("drivers: Remove explicit invocations
of mmiowb()") we need a completion barrier in queued_spin_unlock(), but
the generic implementation use smp_store_release() which only provide an
ordering barrier.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.
If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.
Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add LoongArch's vector extensions support, which including 128bit LSX
(i.e., Loongson SIMD eXtension) and 256bit LASX (i.e., Loongson Advanced
SIMD eXtension).
Linux kernel doesn't use vector itself, it only handle exceptions and
context save/restore. So it only needs a subset of these instructions:
* Vector load/store: vld vst vldx vstx xvld xvst xvldx xvstx
* 8bit-elements move: vpickve2gr.b xvpickve2gr.b vinsgr2vr.b xvinsgr2vr.b
* 16bit-elements move: vpickve2gr.h xvpickve2gr.h vinsgr2vr.h xvinsgr2vr.h
* 32bit-elements move: vpickve2gr.w xvpickve2gr.w vinsgr2vr.w xvinsgr2vr.w
* 64bit-elements move: vpickve2gr.d xvpickve2gr.d vinsgr2vr.d xvinsgr2vr.d
* Elements permute: vpermi.w vpermi.d xvpermi.w xvpermi.d xvpermi.q
Introduce AS_HAS_LSX_EXTENSION and AS_HAS_LASX_EXTENSION to avoid non-
vector toolchains complains unsupported instructions.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see that "Time namespaces are not supported" on LoongArch:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
# Time namespaces are not supported
ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
# Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
1..0 # SKIP Time namespaces are not supported
On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.
Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().
At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().
With this patch under CONFIG_TIME_NS:
(1) clone3 test
# cd tools/testing/selftests/clone3 && make && ./clone3
...
ok 18 [739] Result (0) matches expectation (0)
# Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
(2) timens test
# cd tools/testing/selftests/timens && make && ./timens
...
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The LoongArch kernel is 64-bit and built with the soft-float ABI,
hence the loongarch64-linux-gnusf target. (The "libc" part can affect
the codegen of libcalls: other arches do not use a bare-metal target,
and currently the only fully supported libc on LoongArch is glibc
anyway.)
See: https://lore.kernel.org/loongarch/CAKwvOdnimxv8oJ4mVY74zqtt1x7KTMrWvn2_T9x22SFDbU6rHQ@mail.gmail.com/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Confirmed working with QEMU system emulation.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a port of commit 08f6554ff90e ("mips: Include KBUILD_CPPFLAGS in
CHECKFLAGS invocation") to arch/loongarch, for fixing cross-compilation
of Linux/LoongArch with Clang, where previously the `--target` flag
would no longer be present for the CHECKFLAGS cc invocation leading to
build failure.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a port of commit 76d7fff22be3e ("MIPS: VDSO: Use CLANG_FLAGS
instead of filtering out '--target='") to arch/loongarch, for fixing
cross-compilation with Clang.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Now the arch code is mostly ready for LLVM/Clang consumption, it is time
to re-organize the CFLAGS a little to actually enable the LLVM build.
Namely, all -G0 switches from CFLAGS are removed, and -mexplicit-relocs
and -mdirect-extern-access are now wrapped with cc-option (with the
related asm/percpu.h definition guarded against toolchain combos that
are known to not work).
A build with !RELOCATABLE && !MODULE is confirmed working within a QEMU
environment; support for the two features are currently blocked on
LLVM/Clang, and will come later.
Why -G0 can be removed:
In GCC, -G stands for "small data threshold", that instructs the
compiler to put data smaller than the specified threshold in a dedicated
"small data" section (called .sdata on LoongArch and several other
arches).
However, benefiting from this would require ABI cooperation, which is
not the case for LoongArch; and current GCC behave the same whether -G0
(equal to disabling this optimization) is given or not. So, remove -G0
from CFLAGS altogether for one less thing to care about. This also
benefits LLVM/Clang compatibility where the -G switch is not supported.
Why -mexplicit-relocs can now be conditionally applied without
regressions:
Originally -mexplicit-relocs is unconditionally added to CFLAGS in case
of CONFIG_AS_HAS_EXPLICIT_RELOCS, because not having it (i.e. old GCC +
new binutils) would not work: modules will have R_LARCH_ABS_* relocs
inside, but given the rarity of such toolchain combo in the wild, it may
not be worthwhile to support it, so support for such relocs in modules
were not added back when explicit relocs support was upstreamed, and
-mexplicit-relocs is unconditionally added to fail the build early.
Now that Clang compatibility is desired, given Clang is behaving like
-mexplicit-relocs from day one but without support for the CLI flag, we
must ensure the flag is not passed in case of Clang. However, explicit
compiler flavor checks can be more brittle than feature detection: in
this case what actually matters is support for __attribute__((model))
when building modules. Given neither older GCC nor current Clang support
this attribute, probing for the attribute support and #error'ing out
would allow proper UX without checking for Clang, and also automatically
work when Clang support for the attribute is to be added in the future.
Why -mdirect-extern-access is now conditionally applied:
This is actually a nice-to-have optimization that can reduce GOT
accesses, but not having it is harmless either. Because Clang does not
support the option currently, but might do so in the future, conditional
application via cc-option ensures compatibility with both current and
future Clang versions.
Suggested-by: Xi Ruoyao <xry111@xry111.site> # cc-option changes
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The invtlb instruction has been supported by upstream LoongArch
toolchains from day one, so ditch the raw opcode trickery and just use
plain inline asm for it.
While at it, also make the invtlb asm statements barriers, for proper
modeling of the side effects. The functions are also marked as
__always_inline instead of just "inline", because they cannot work at
all if not inlined: the op argument will not be compile-time const in
that case, thus failing to satisfy the "i" constraint.
The signature of the other more specific invtlb wrappers contain unused
arguments right now, but these are not removed right away in order for
the patch to be focused. In the meantime, assertions are added to ensure
no accidental misuse happens before the refactor. (The more specific
wrappers cannot re-use the generic invtlb wrapper, because the ISA
manual says $zero shall be used in case a particular op does not take
the respective argument: re-using the generic wrapper would mean losing
control over the register usage.)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In addition to less visual clutter, this also makes Clang happy
regarding the const-ness of arguments. In the original approach, all
Clang gets to see is the incoming arguments whose const-ness cannot be
proven without first being inlined; so Clang errors out here while GCC
is fine.
While at it, tweak several printk format strings because the return type
of csr_read64 becomes effectively unsigned long, instead of unsigned
long long.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The GNU assembler (as of 2.40) mis-treats FCSR operands as GPRs, but
the LLVM IAS does not. Probe for this and refer to FCSRs as "$fcsrNN"
if support is present.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When the kernel is compiled with LLVM, the register names being handled
during exception fixup building are ABI names instead of bare $rNN
style. Add mapping for the ABI names for LLVM compatibility.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Taking the address delta between symbols in different sections is not
supported by the LLVM IAS. Instead, do this in the linker script, so
the same data can be properly referenced in assembly.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
[chenhuacai: Fix build with !CONFIG_EFI_STUB]
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add guard for the larch_insn_gen_xxx functions to verify whether the
immediate operand is within the acceptable range.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Debugfs functions are not supposed to be checked for errors. This
is sort of unusual but it is described in the comments for the
debugfs_create_dir() function. Also debugfs_create_dir() can never
return NULL.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
ACPI systems set io masters by parsing ACPI MADT, FDT systems have no
MADT so we explicitly set CPU#0 as the io master. Otherwise CPU#0 will
be considered as hotpluggable.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|