summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-21netfilter: nf_tables: Fix a memory leak in nf_tables_updchainQuan Tian1-13/+14
If nft_netdev_register_hooks() fails, the memory associated with nft_stats is not freed, causing a memory leak. This patch fixes it by moving nft_stats_alloc() down after nft_netdev_register_hooks() succeeds. Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Signed-off-by: Quan Tian <tianquan23@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-03-21Merge branch ↵Paolo Abeni2-9/+65
'mt7530-dsa-subdriver-fix-vlan-egress-and-handling-of-all-link-local-frames' says: ==================== MT7530 DSA subdriver fix VLAN egress and handling of all link-local frames This patch series fixes the VLAN tag egress procedure for link-local frames, and fixes handling of all link-local frames. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> ==================== Link: https://lore.kernel.org/r/20240314-b4-for-net-mt7530-fix-link-local-vlan-v2-0-7dbcf6429ba0@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-21net: dsa: mt7530: fix handling of all link-local framesArınç ÜNAL2-4/+46
Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as regular multicast frames, therefore flooding them to user ports. On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA must only be propagated to C-VLAN and MAC Bridge components. That means VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, these frames are supposed to be processed by the CPU (software). So we make the switch only forward them to the CPU port. And if received from a CPU port, forward to a single port. The software is responsible of making the switch conform to the latter by setting a single port as destination port on the special tag. This switch intellectual property cannot conform to this part of the standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC DAs, it also includes :22-FF which the scope of propagation is not supposed to be restricted for these MAC DAs. Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a comment for the remaining MAC DAs. Note that the ingress port must have a PVID assigned to it for the switch to forward untagged frames. A PVID is set by default on VLAN-aware and VLAN-unaware ports. However, when the network interface that pertains to the ingress port is attached to a vlan_filtering enabled bridge, the user can remove the PVID assignment from it which would prevent the link-local frames from being trapped to the CPU port. I am yet to see a way to forward link-local frames while preventing other untagged frames from being forwarded too. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-21net: dsa: mt7530: fix link-local frames that ingress vlan filtering portsArınç ÜNAL2-9/+23
Whether VLAN-aware or not, on every VID VLAN table entry that has the CPU port as a member of it, frames are set to egress the CPU port with the VLAN tag stacked. This is so that VLAN tags can be appended after hardware special tag (called DSA tag in the context of Linux drivers). For user ports on a VLAN-unaware bridge, frame ingressing the user port egresses CPU port with only the special tag. For user ports on a VLAN-aware bridge, frame ingressing the user port egresses CPU port with the special tag and the VLAN tag. This causes issues with link-local frames, specifically BPDUs, because the software expects to receive them VLAN-untagged. There are two options to make link-local frames egress untagged. Setting CONSISTENT or UNTAGGED on the EG_TAG bits on the relevant register. CONSISTENT means frames egress exactly as they ingress. That means egressing with the VLAN tag they had at ingress or egressing untagged if they ingressed untagged. Although link-local frames are not supposed to be transmitted VLAN-tagged, if they are done so, when egressing through a CPU port, the special tag field will be broken. BPDU egresses CPU port with VLAN tag egressing stacked, received on software: 00:01:25.104821 AF Unknown (382365846), length 106: | STAG | | VLAN | 0x0000: 0000 6c27 614d 4143 0001 0000 8100 0001 ..l'aMAC........ 0x0010: 0026 4242 0300 0000 0000 0000 6c27 614d .&BB........l'aM 0x0020: 4143 0000 0000 0000 6c27 614d 4143 0000 AC......l'aMAC.. 0x0030: 0000 1400 0200 0f00 0000 0000 0000 0000 ................ BPDU egresses CPU port with VLAN tag egressing untagged, received on software: 00:23:56.628708 AF Unknown (25215488), length 64: | STAG | 0x0000: 0000 6c27 614d 4143 0001 0000 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ BPDU egresses CPU port with VLAN tag egressing tagged, received on software: 00:01:34.311963 AF Unknown (25215488), length 64: | Mess | 0x0000: 0000 6c27 614d 4143 0001 0001 0026 4242 ..l'aMAC.....&BB 0x0010: 0300 0000 0000 0000 6c27 614d 4143 0000 ........l'aMAC.. 0x0020: 0000 0000 6c27 614d 4143 0000 0000 1400 ....l'aMAC...... 0x0030: 0200 0f00 0000 0000 0000 0000 ............ To prevent confusing the software, force the frame to egress UNTAGGED instead of CONSISTENT. This way, frames can't possibly be received TAGGED by software which would have the special tag field broken. VLAN Tag Egress Procedure For all frames, one of these options set the earliest in this order will apply to the frame: - EG_TAG in certain registers for certain frames. This will apply to frame with matching MAC DA or EtherType. - EG_TAG in the address table. This will apply to frame at its incoming port. - EG_TAG in the PVC register. This will apply to frame at its incoming port. - EG_CON and [EG_TAG per port] in the VLAN table. This will apply to frame at its outgoing port. - EG_TAG in the PCR register. This will apply to frame at its outgoing port. EG_TAG in certain registers for certain frames: PPPoE Discovery_ARP/RARP: PPP_EG_TAG and ARP_EG_TAG in the APC register. IGMP_MLD: IGMP_EG_TAG and MLD_EG_TAG in the IMC register. BPDU and PAE: BPDU_EG_TAG and PAE_EG_TAG in the BPC register. REV_01 and REV_02: R01_EG_TAG and R02_EG_TAG in the RGAC1 register. REV_03 and REV_0E: R03_EG_TAG and R0E_EG_TAG in the RGAC2 register. REV_10 and REV_20: R10_EG_TAG and R20_EG_TAG in the RGAC3 register. REV_21 and REV_UN: R21_EG_TAG and RUN_EG_TAG in the RGAC4 register. With this change, it can be observed that a bridge interface with stp_state and vlan_filtering enabled will properly block ports now. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-21x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'Masahiro Yamada1-0/+1
Kconfig emits a warning for the following command: $ make ARCH=x86_64 tinyconfig ... .config:1380:warning: override: UNWINDER_GUESS changes choice state When X86_64=y, the unwinder is exclusively selected from the following three options: - UNWINDER_ORC - UNWINDER_FRAME_POINTER - UNWINDER_GUESS However, arch/x86/configs/tiny.config only specifies the values of the last two. UNWINDER_ORC must be explicitly disabled. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240320154313.612342-1-masahiroy@kernel.org
2024-03-21Merge branch 'report-rcu-qs-for-busy-network-kthreads'Jakub Kicinski3-0/+37
Yan Zhai says: ==================== Report RCU QS for busy network kthreads This changeset fixes a common problem for busy networking kthreads. These threads, e.g. NAPI threads, typically will do: * polling a batch of packets * if there are more work, call cond_resched() to allow scheduling * continue to poll more packets when rx queue is not empty We observed this being a problem in production, since it can block RCU tasks from making progress under heavy load. Investigation indicates that just calling cond_resched() is insufficient for RCU tasks to reach quiescent states. This also has the side effect of frequently clearing the TIF_NEED_RESCHED flag on voluntary preempt kernels. As a result, schedule() will not be called in these circumstances, despite schedule() in fact provides required quiescent states. This at least affects NAPI threads, napi_busy_loop, and also cpumap kthread. By reporting RCU QSes in these kthreads periodically before cond_resched, the blocked RCU waiters can correctly progress. Instead of just reporting QS for RCU tasks, these code share the same concern as noted in the commit d28139c4e967 ("rcu: Apply RCU-bh QSes to RCU-sched and RCU-preempt when safe"). So report a consolidated QS for safety. It is worth noting that, although this problem is reproducible in napi_busy_loop, it only shows up when setting the polling interval to as high as 2ms, which is far larger than recommended 50us-100us in the documentation. So napi_busy_loop is left untouched. Lastly, this does not affect RT kernels, which does not enter the scheduler through cond_resched(). Without the mentioned side effect, schedule() will be called time by time, and clear the RCU task holdouts. V4: https://lore.kernel.org/bpf/cover.1710525524.git.yan@cloudflare.com/ V3: https://lore.kernel.org/lkml/20240314145459.7b3aedf1@kernel.org/t/ V2: https://lore.kernel.org/bpf/ZeFPz4D121TgvCje@debian.debian/ V1: https://lore.kernel.org/lkml/Zd4DXTyCf17lcTfq@debian.debian/#t ==================== Link: https://lore.kernel.org/r/cover.1710877680.git.yan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21bpf: report RCU QS in cpumap kthreadYan Zhai1-0/+3
When there are heavy load, cpumap kernel threads can be busy polling packets from redirect queues and block out RCU tasks from reaching quiescent states. It is insufficient to just call cond_resched() in such context. Periodically raise a consolidated RCU QS before cond_resched fixes the problem. Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/c17b9f1517e19d813da3ede5ed33ee18496bb5d8.1710877680.git.yan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21net: report RCU QS on threaded NAPI repollingYan Zhai1-0/+3
NAPI threads can keep polling packets under load. Currently it is only calling cond_resched() before repolling, but it is not sufficient to clear out the holdout of RCU tasks, which prevent BPF tracing programs from detaching for long period. This can be reproduced easily with following set up: ip netns add test1 ip netns add test2 ip -n test1 link add veth1 type veth peer name veth2 netns test2 ip -n test1 link set veth1 up ip -n test1 link set lo up ip -n test2 link set veth2 up ip -n test2 link set lo up ip -n test1 addr add 192.168.1.2/31 dev veth1 ip -n test1 addr add 1.1.1.1/32 dev lo ip -n test2 addr add 192.168.1.3/31 dev veth2 ip -n test2 addr add 2.2.2.2/31 dev lo ip -n test1 route add default via 192.168.1.3 ip -n test2 route add default via 192.168.1.2 for i in `seq 10 210`; do for j in `seq 10 210`; do ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201 done done ip netns exec test2 ethtool -K veth2 gro on ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded' ip netns exec test1 ethtool -K veth1 tso off Then run an iperf3 client/server and a bpftrace script can trigger it: ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null& ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null& bpftrace -e 'kfunc:__napi_poll{@=count();} interval:s:1{exit();}' Report RCU quiescent states periodically will resolve the issue. Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support") Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/4c3b0d3f32d3b18949d75b18e5e1d9f13a24f025.1710877680.git.yan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21rcu: add a helper to report consolidated flavor QSYan Zhai1-0/+31
When under heavy load, network processing can run CPU-bound for many tens of seconds. Even in preemptible kernels (non-RT kernel), this can block RCU Tasks grace periods, which can cause trace-event removal to take more than a minute, which is unacceptably long. This commit therefore creates a new helper function that passes through both RCU and RCU-Tasks quiescent states every 100 milliseconds. This hard-coded value suffices for current workloads. Suggested-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Yan Zhai <yan@cloudflare.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21ionic: update documentation for XDP supportShannon Nelson1-0/+22
Add information to our documentation for the XDP features and related ethtool stats. While we're here, we also add the missing timestamp stats. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240319163534.38796-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel docHerve Codina1-21/+23
The make htmldoc command failed with the following error ... include/linux/bitmap.h:524: ERROR: Unexpected indentation. ... include/linux/bitmap.h:524: CRITICAL: Unexpected section title or transition. Move the visual representation to a literal block. Fixes: de5f84338970 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-kernel/20240312153059.3ffde1b7@canb.auug.org.au/ Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20240314120006.458580-1-herve.codina@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-21Merge tag 'v6.9-rc-smb3-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds15-147/+716
Pull smb server updates from Steve French: - add support for durable file handles (an important data integrity feature) - fixes for potential out of bounds issues - fix possible null dereference in close - getattr fixes - trivial typo fix and minor cleanup * tag 'v6.9-rc-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: remove module version ksmbd: fix potencial out-of-bounds when buffer offset is invalid ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() ksmbd: Fix spelling mistake "connction" -> "connection" ksmbd: fix possible null-deref in smb_lazy_parent_lease_break_close ksmbd: add support for durable handles v1/v2 ksmbd: mark SMB2_SESSION_EXPIRED to session when destroying previous session ksmbd: retrieve number of blocks using vfs_getattr in set_file_allocation_info ksmbd: replace generic_fillattr with vfs_getattr
2024-03-21Merge tag 'trace-tools-v6.9' of ↵Linus Torvalds21-306/+650
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull trace tool updates from Steven Rostedt: "Tracing: - Update makefiles for latency-collector and RTLA, using tools/build/ makefiles like perf does, inheriting its benefits. For example, having a proper way to handle library dependencies. - The timerlat tracer has an interface for any tool to use. rtla timerlat tool uses this interface dispatching its own threads as workload. But, rtla timerlat could also be used for any other process. So, add 'rtla timerlat -U' option, allowing the timerlat tool to measure the latency of any task using the timerlat tracer interface. Verification: - Update makefiles for verification/rv, using tools/build/ makefiles like perf does, inheriting its benefits. For example, having a proper way to handle dependencies" * tag 'trace-tools-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools/rtla: Add -U/--user-load option to timerlat tools/verification: Use tools/build makefiles on rv tools/rtla: Use tools/build makefiles to build rtla tools/tracing: Use tools/build makefiles on latency-collector
2024-03-21netfilter: nf_tables: do not compare internal table flags on updatesPablo Neira Ayuso1-1/+1
Restore skipping transaction if table update does not modify flags. Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-03-21netfilter: nft_set_pipapo: release elements in clone only from destroy pathPablo Neira Ayuso1-4/+1
Clone already always provides a current view of the lookup table, use it to destroy the set, otherwise it is possible to destroy elements twice. This fix requires: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol") which came after: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path"). Fixes: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-03-21MAINTAINER: Include linux-arm-msm for Qualcomm RTC patchesBjorn Andersson1-0/+1
Add Qualcomm RTC driver to the linux-arm-msm list, to ensure that members of the Qualcomm community gets Cc'ed, to assist with reviews etc. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Link: https://lore.kernel.org/r/20240319-maintainer-msm-add-rtc-v1-1-3a4f7d41b4d4@quicinc.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-03-20riscv: Fix syscall wrapper for >word-size argumentsSami Tolvanen1-14/+39
The current syscall wrapper macros break 64-bit arguments on rv32 because they only guarantee the first N input registers are passed to syscalls that accept N arguments. According to the calling convention, values twice the word size reside in register pairs and as a result, syscall arguments don't always have a direct register mapping on rv32. Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the type of the `__se(_compat)_sys_*` functions on rv32, change the function declarations to accept `ulong` arguments and alias them to the actual syscall implementations, similarly to the existing macros in include/linux/syscalls.h. This matches previous behavior and ensures registers are passed to syscalls as-is, no matter which argument types they expect. Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers") Reported-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-20dm snapshot: fix lockup in dm_exception_table_exitMikulas Patocka1-1/+3
There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. Reported-by: John Pittman <jpittman@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-20kconfig: tests: test dependency after shuffling choicesMasahiro Yamada5-0/+71
Commit c8fb7d7e48d1 ("kconfig: fix broken dependency in randconfig- generated .config") fixed the issue, but I did not add a test case. This commit adds a test case that emulates the reported situation. The test would fail without c8fb7d7e48d1. To handle the choice "choose X", FOO must be calculated beforehand. FOO depends on A, which is a member of another choice "choose A or B". Kconfig _temporarily_ assumes the value of A to proceed. The choice "choose A or B" will be shuffled later, but the result may or may not meet "FOO depends on A". Kconfig should invalidate the symbol values and recompute them. In the real example for ARCH=arm64, the choice "Instrumentation type" needs the value of CPU_BIG_ENDIAN. The choice "Endianness" will be shuffled later. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-03-20kconfig: tests: add a test for randconfig with dependent choicesMasahiro Yamada5-0/+78
Since commit 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig"), conf_set_all_new_symbols() is repeated until there is no more choice left to be shuffled. The motivation was to shuffle a choice nested in another choice. Although commit 09d5873e4d1f ("kconfig: allow only 'config', 'comment', and 'if' inside 'choice'") disallowed the nested choice structure, we must still keep 3b9a19e08960 because there are still cases where conf_set_all_new_symbols() must iterate. scripts/kconfig/tests/choice_randomize/Kconfig is the test case. The second choice depends on 'B', which is the member of the first choice. With 3b9a19e08960 reverted, we would never get the pattern specified by scripts/kconfig/tests/choice_randomize/expected_config2. A real example can be found in lib/Kconfig.debug. Without 3b9a19e08960, the randconfig would not shuffle the "Compressed Debug information" choice, which depends on DEBUG_INFO, which is derived from another choice "Debug information". My goal is to refactor Kconfig so that randconfig will work more simply, without using the loop. For now, let's add a test case to ensure all dependent choices are shuffled, as it is a somewhat tricky case for the current Kconfig. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-03-20kconfig: tests: support KCONFIG_SEED for the randconfig runnerMasahiro Yamada1-6/+10
This will help get consistent results for randconfig tests. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-03-20drm/amdgpu/pm: Don't use OD table on ArcturusMa Jun1-28/+5
OD is not supported on Arcturus, so the OD table should not be used. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: drop setting buffer funcs in sdma442Le Ma1-22/+1
To fix the entity rq NULL issue. This setting has been moved to upper level. Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level") Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix noise issue on HDMI AV muteLeo Ma1-1/+11
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Remove pixle rate limit for subvpWenjing Liu1-0/+1
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"Lang Yu1-3/+0
Ready now. Remove this workaround. This reverts commit d40f6213b52c161fd4634933acbc32103a283363. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Tested-by: Alan Liu <haoping.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in ↵Ma Jun1-10/+6
amdgpu_device_init()" This patch causes the following iounmap erorr and calltrace iounmap: bad address 00000000d0b3631f The original patch was unjustified because amdgpu_device_fini_sw() will always cleanup the rmmio mapping. This reverts commit eb4f139888f636614dab3bcce97ff61cefc4b3a7. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add a dc_state NULL check in dc_state_releaseAllen Pan1-1/+2
[How] Check wheather state is NULL before releasing it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Return the correct HDCP error codeRodrigo Siqueira1-0/+3
[WHY & HOW] If the display is null when creating an HDCP session, return a proper error code. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Implement wait_for_odm_update_pending_completeWenjing Liu11-4/+90
[WHY] Odm update is doubled buffered. We need to wait for ODM update to be completed before optimizing bandwidth or programming new udpates. [HOW] implement wait_for_odm_update_pending_complete function to wait for: 1. odm configuration update is no longer pending in timing generator. 2. no pending dpg pattern update for each active OPP. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Lock all enabled otg pipes even with no planesWenjing Liu3-1/+26
[WHY] On DCN32 we support dynamic ODM even when OTG is blanked. When ODM configuration is dynamically changed and the OTG is on blank pattern, we will need to reprogram OPP's test pattern based on new ODM configuration. Therefore we need to lock the OTG pipe to avoid temporary corruption when we are reprogramming OPP blank patterns. [HOW] Add a new interdependent update lock implementation to lock all enabled OTG pipes even when there is no plane on the OTG for DCN32. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso7-10/+18
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix idle check for shared firmware stateNicholas Kazlauskas1-9/+3
[WHY] We still had an instance of get_idle_state checking the PMFW scratch register instead of the actual idle allow signal. [HOW] Replace it with the SW state check for whether we had allowed idle through notify_idle. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update odm when ODM combine is changed on an otg master ↵Wenjing Liu2-20/+28
pipe with no plane [WHY] When committing an update with ODM combine change when the plane is removing or already removed, we fail to detect odm change in pipe update flags. This has caused mismatch between new dc state and the actual hardware state, because we missed odm programming. [HOW] - Detect odm change even for otg master pipe without a plane. - Update odm config before calling program pipes for pipe with planes. The commit also updates blank pattern programming when odm is changed without plane. This is because number of OPP is changed when ODM combine is changed. Blank pattern is per OPP so we will need to reprogram OPP based on the new pipe topology. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Init DPPCLK from SMU on dcn32Dillon Varone5-8/+41
[WHY & HOW] DPPCLK ranges should be obtained from the SMU when available. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add monitor patch for specific eDPRyan Lin1-2/+4
[WHY] Some eDP panels' ext caps don't write initial values. The value of dpcd_addr (0x317) can be random and the backlight control interface will be incorrect. [HOW] Add new panel patches to remove sink ext caps. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Allow dirty rects to be sent to dmub when abm is activeJosip Pavic1-0/+3
[WHY] It's beneficial for ABM to know when new frame data are available. [HOW] Add new condition to allow dirty rects to be sent to DMUB when ABM is active. ABM will use this as a signal that a new frame has arrived. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Override min required DCFCLK in dml1_validateSohaib Nadeem3-0/+10
[WHY]: Increasing min DCFCLK addresses underflow issues that occur when phantom pipe is turned on for some Sub-Viewport configs [HOW]: dcn32_override_min_req_dcfclk is added to override DCFCLK value in dml1_validate when subviewport is being used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Bypass display ta if display hw is not availableHawking Zhang1-0/+18
Do not load/invoke display TA if display hardware is not available. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: correct the KGQ fallback messagePrike Liang1-1/+1
Fix the KGQ fallback function name, as this will help differentiate the failure in the KCQ enablement. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/pm: Check the validity of overdiver power limitMa Jun5-26/+37
Check the validity of overdriver power limit before using it. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-20drm/amdgpu/pm: Fix NULL pointer dereference when get power limitMa Jun5-31/+41
Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reported-by: Yin Zhenguo <zhenguo.yin@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-20drm/amdgpu: Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOVZhenGuo Yin2-2/+9
[Why] RLCG interface returns "out-of-range" error under SRIOV VF when accessing PF-only registers. [How] Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOV. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Init zone device and drm client after mode-1 reset on reloadAhmad Rehman2-2/+5
In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flagPhilip Yang1-0/+1
Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue. Cc: stable@vger.kernel.org Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/vcn: enable vcn1 fw load for VCN 4_0_6Saleemkhan Jamadar10-38/+52
v1 - update the fw header for each vcn instance (Veera) VCN1 has different FW binary in VCN v4_0_6. Add changes to load the VCN1 fw binary Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Enable DML2 debug flagsAurabindo Pillai1-0/+3
[WHY & HOW] Enable DML2 related debug config options in DM for testing purposes. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Change default size for dummy plane in DML2Swapnil Patel1-3/+15
[WHY & HOW] Currently, to map dc states into dml_display_cfg, We create a dummy plane if the stream doesn't have any planes attached to it. This dummy plane uses max addersable width height. This results in certain mode validations failing when they shouldn't. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Reset IH OVERFLOW_EN bit for IH 7.0Friedrich Vock1-0/+6
IH 7.0 support landed shortly after the original patch for resetting the bit on all other generations, but without that patch applied. Fixes: 12443fc53e7d ("drm/amdgpu: Add ih v7_0 ip block support") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: fix mmhub client id out-of-bounds accessLang Yu1-4/+3
Properly handle cid 0x140. Fixes: aba2be41470a ("drm/amdgpu: add mmhub 3.3.0 support") Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-11 02:21:38 +0300