summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-11-08drbd: Fix the upper limit of resync-afterAndreas Gruenbacher6-23/+24
The 32-bit resync_after netlink field takes a device minor number as parameter, which is no longer limited to 255. We cannot statically verify which device numbers are valid, so set the ummer limit to the highest possible signed 32-bit integer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refer to connect-int consistently throughout the codeAndreas Gruenbacher2-7/+7
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refer to resync-rate consistently throughout the codeAndreas Gruenbacher5-10/+11
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: skip spurious wait_event in drbd_al_begin_ioLars Ellenberg1-8/+10
Activity log transaction writes are serialized on a bit lock. If several CPUs race to write an AL transaction, those that did not get the lock the first time may continue as soon as there are no more pending transactions. The do not need to all grab the lock in turn, just to realize that the AL is clean already, and they have nothing to do. This also closes a potential deadlock with drbd_adm_disk_opts. Once it got the AL bit lock, it knows there are no pending transactions, the AL is clean, and it should be safe to wait for all element references to drop to zero. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename the want_lose field/flag to discard_my_dataAndreas Gruenbacher5-14/+14
This is what it is called in config files and on the command line as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Also define the default values of boolean flags in a single placeAndreas Gruenbacher2-8/+18
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make broadcast events return NO_ERRORAndreas Gruenbacher1-1/+1
Instead of returning a ret_code outside of the range of enum drbd_ret_code, use NO_ERROR to indicate success. This way, ret_code has the same meaning in all packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removing drbd_cfg_rwsemPhilipp Reisner6-75/+72
* Updates to all configuration items is done under genl_lock(). Including removal of mdevs or tconns. * All read non sleeping read sides are protected by rcu * All sleeping read sides keep reference counts to keep the objects alive Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Use RCU for the drbd_tconns listPhilipp Reisner2-8/+11
Preparing removal of drbd_cfg_rwsem Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refcounting for mdev objectsPhilipp Reisner4-19/+31
Preparing removal of drbd_cfg_rwsem Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-tcp-cork into tcp-cork={yes|no}Andreas Gruenbacher3-6/+6
Change the --no-tcp-cork drbdsetup command line option as well as the no_cork netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-md-flushes into md-flushes={yes|no}Andreas Gruenbacher2-4/+4
Change the --no-md-flushes drbdsetup command line option as well as the no_md_flush netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-disk-drain into disk-drain={yes|no}Andreas Gruenbacher2-2/+2
Change the --no-disk-drain drbdsetup command line option as well as the no_disk_drain netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-disk-flushes into disk-flushes={yes|no}Andreas Gruenbacher2-3/+3
Change the --no-disk-flushes drbdsetup command line option as well as the no_disk_flush netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Convert boolean flags on netlink from NLA_FLAG to NLA_U8Andreas Gruenbacher1-8/+2
Flags of type NLA_FLAG are either present or absent, but do not have a value by themselves. Use type NLA_U8 for our boolean flags instead, and use the value to determine if the flag should be on or off. On the drbdsetup command line, all those flags have an optional yes/no argument which defaults to yes. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: RCU for rs_plan_sPhilipp Reisner4-55/+77
This removes the issue with using peer_seq_lock out of different contexts. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Enforce limits of disk_conf members; centralized these checksPhilipp Reisner1-10/+14
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Made the fifo object a self contained object (preparing for RCU)Philipp Reisner5-31/+57
* Moved rs_planed into it, named total * When having a pointer to the object the values can be embedded into the fifo object. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: RCU for disk_confPhilipp Reisner6-133/+282
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce __s32_field in the genetlink macro magicLars Ellenberg3-5/+8
...and drop explicit typecasts (int)meta_dev_idx < 0. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Renamed (old|new)_conf into (old|new)_net_conf in receive_SyncParamPhilipp Reisner1-16/+16
Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Split drbd_alter_sa() into drbd_sync_after_valid() and ↵Philipp Reisner3-23/+17
drbd_sync_after_changed() Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_dew_dev_size() gets the user requests disk_size as argumentPhilipp Reisner3-7/+8
Preparing RCU for disk_conf Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Renamed the net_conf_update mutex to conf_updatePhilipp Reisner5-17/+17
Preparing to use the same mutex for disk_conf updates Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed dead codePhilipp Reisner1-2/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.hAndreas Gruenbacher6-124/+91
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove left-over unused defineAndreas Gruenbacher1-1/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix schedule in atomicLars Ellenberg1-4/+9
An administrative detach used to request a state change directly to D_DISKLESS, first suspending IO to avoid the last put_ldev() occuring from an endio handler, potentially in irq context. This is not enough on the receiving side (typically secondary), we may miss some peer_req on the way to local disk, which then may do the last put_ldev() from their drbd_peer_request_endio(). This patch makes the detach always go through the intermediate D_FAILED state. We may consider to rename it D_DETACHING. Alternative approach would be to create yet an other work item to be scheduled on the worker, do the destructor work from there, and get the timing right. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix thread stop deadlockLars Ellenberg4-23/+11
There are races where the receiver may be exiting, but still need the worker to process some stuff. Do not wait for the receiver to die from an exiting worker. The receiver must already be dead in case the worker decides to exit. If the receiver was still alive, it may still want to queue work, and do drbd_flush_workqueue() from it's disconnect cleanup code, which would no longer be processed by an exiting worker. This also would deadlock, if the worker was to synchornously wait for the receiver to die. Do not implicitly stop the worker. The worker will only be stopped from configuration context, from conn_reconfig_done(), drbd_adm_down() or drbd_adm_delete_connection(), after making sure the receiver is already stopped. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix race when forcefully disconnectingLars Ellenberg3-50/+62
If a forced disconnect hits a restarting receiver right after it passed its final "if (C_DISCONNECTING)" test in drbdd_init(), but before it was actually restarted by drbd_thread_setup, we could be left with a connection stuck in C_DISCONNECTING, never reaching C_STANDALONE, which would be necessary to take it down or reconfigure it. Move the last cleanup into w_after_conn_state_ch(), and do an additional state change request in conn_try_disconnect(), just in case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Allow to change data-integrity-alg on the flyAndreas Gruenbacher3-40/+40
The main purpose of this is to allow to turn data integrity checking on and off on demand without causing interruptions. Implemented by allocating tconn->peer_integrity_tfm only when receiving a P_PROTOCOL message. l accesses to tconn->peer_integrity_tf happen in worker context, and no further synchronization is necessary. On the sender side, tconn->integrity_tfm is modified under tconn->data.mutex, and a P_PROTOCOL message is sent whenever. All accesses to tconn->integrity_tfm already happen under this mutex. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce a "lockless" variant of drbd_send_protocoll()Andreas Gruenbacher2-8/+37
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove obsolete drbd_crypto_is_hash()Andreas Gruenbacher3-25/+11
We allocate hash transformations with crypto_alloc_hash() which will only return hash algorithms. It is not necessary to reconfirm that we actually got a hash algorithm. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_r_tfm -> peer_integrity_tfmAndreas Gruenbacher4-17/+17
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_w_tfm -> integrity_tfmAndreas Gruenbacher3-18/+18
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Wrong use of RCU in receive_protocol()Andreas Gruenbacher1-13/+19
It is not enough to grab net_conf->integrity_alg under rcu_read_lock() and access it outside of it; the entire net_conf object may be gone by then. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix copy/paste error in commentLars Ellenberg1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rename variable sc to res_optsLars Ellenberg1-7/+7
sc was short for syncer conf, which does not exist anymore anyways. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rename variable ndc to new_disk_confLars Ellenberg1-17/+17
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: on reconfiguration requests, mind the SET_DEFAULTS flagLars Ellenberg3-65/+91
The DRBD_GENL_F_SET_DEFAULTS flag was ignored for drbd_adm_disk_opts() and drbd_adm_net_opts(). Factor out drbd_set_*_defaults() helper functions, and call them appropriately. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Consider all crypto options in connect and in net-optionsPhilipp Reisner1-109/+121
So for this was simply not considered after the options have been re-arranged. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix various disconnecting racesLars Ellenberg3-17/+26
If an admin requests disconnect at a time when the state handling already disconnects/reconnects, there have been some races. Make sure to always really stop the network threads before returning success for disconnect. Do not pretend successfull forced disconnect, if the state handling returned an error. Return success from drbd_adm_down() only after all threads are finished. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: remove useless kobject_uevent from drbd_adm_connectLars Ellenberg1-3/+3
Calling kobject_uevent, which may sleep, from within rcu_read_lock() protected regions is not possible. This particular kobject_uevent also is also wrong. It was supposed to trigger a udev run, just in case something relevant to udev symlink magic has changed, when adjusting runtime re-configurable settings while we still had the "syncer conf". It was improperly placed in connect when we dropped the "syncer conf". The right thing to do is probably to call "udevadm trigger" directly in those cases where drbdadm thinks there was a need to trigger extra udev runs. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed the OBJECT_DYING and the CONFIG_PENDING bitsPhilipp Reisner4-41/+4
superseded by refcounting Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Take a reference on tconn when finding a tconn by namePhilipp Reisner3-7/+16
Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Basic refcounting for drbd_tconnPhilipp Reisner4-14/+35
References hold by: * Each (running) drbd thread has a reference on tconn * Each mdev has a referenc on tconn * Beeing in the all_tconn list counts for one reference * Each after_conn_state_chg_work has a reference to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Eliminated drbd_free_resoruces() it is superseeded by conn_free_crypto()Philipp Reisner2-24/+12
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: move comment about stopping the receiver thread to where it belongsLars Ellenberg1-2/+3
When the last volume of a replication group is unconfigured, the worker thread exits. To not interfere with cleanup of other threads, before the the last cleanups run, we need to make sure the receiver has already exited. The commend explaining that clearly belongs above drbd_thread_stop(&tconn->receiver), not in the cleanup loop below. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: cmdname() enum to string convertion was missing a few constantsLars Ellenberg1-0/+9
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix setsockopt for user mode linuxLars Ellenberg1-13/+20
We use our own copy of kernel_setsockopt, and did not mess around with get_fs/set_fs, since we thought we knew we would always be KERNEL_DS anyways. Apparently not so for at least user mode linux, so put the set_fs(KERNEL_DS) in there. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-20 00:51:29 +0300