| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
|
|
Pull cifs fixes from Steve French:
"cifs/smb3 client fixes:
- two multichannel fixes
- three reconnect fixes
- unmap fix"
* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix interface count calculation during refresh
cifs: refcount only the selected iface during interface update
cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
cifs: fix race in assemble_neg_contexts()
cifs: ignore ipc reconnect failures during dfs failover
cifs: Fix kmap_local_page() unmapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
of/fdt: run soc memory setup when early_init_dt_scan_memory fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were
on the mailing list for a long time and passed all the 0-day bot
testing so all should be fine with them as well"
* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Ignore End Transfer delay on teardown
usb: dwc3: xilinx: include linux/gpio/consumer.h
usb: fotg210-udc: fix error return code in fotg210_udc_probe()
usb: fotg210: fix OTG-only build
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
|
|
Pull rdma fixes from Jason Gunthorpe:
"Most noticeable is that Yishai found a big data corruption regression
due to a change in the scatterlist:
- Do not wrongly combine non-contiguous pages in scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to merge contiguous pages into the last SG properly
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
RDMA/srp: Move large values to a new enum for gcc13
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: readd -w option when vmlinux.o or Module.symver is missing
kbuild: fix single *.ko build
|
|
Pull drm fixes from Daniel Vetter:
"Still not much, but more than last week. Dave should be back next week
from the beaching.
drivers:
- i915-gvt fixes
- amdgpu/kfd fixes
- panfrost bo refcounting fix
- meson afbc corruption fix
- imx plane width fix
core:
- drm/sched fixes
- drm/mm kunit test fix
- dma-buf export error handling fixes"
* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amd/display: Enable Freesync Video Mode by default"
drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
drm/i915/gvt: use atomic operations to change the vGPU status
drm/i915/gvt: fix vgpu debugfs clean in remove
drm/i915/gvt: fix gvt debugfs destroy
drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
drm/amdkfd: Fix kernel warning during topology setup
drm/scheduler: Fix lockup in drm_sched_entity_kill()
drm/imx: ipuv3-plane: Fix overlay plane width
drm/scheduler: Fix lockup in drm_sched_entity_kill()
drm/virtio: Fix memory leak in virtio_gpu_object_create()
drm/meson: Reduce the FIFO lines held when AFBC is not used
drm/tests: reduce drm_mm_test stack usage
drm/panfrost: Fix GEM handle creation ref-counting
drm/plane-helper: Add the missing declaration of drm_atomic_state
dma-buf: fix dma_buf_export init order v2
|
|
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by 23393c646142 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.
In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.
Link: https://lore.kernel.org/lkml/7cbe96cf-e0b5-ba63-d1b4-f63d2e826efa@suse.cz/
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Luigi Semenzato <semenzato@chromium.org>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).
Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com
Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
|
|
Pull io_uring fixes from Jens Axboe:
"A few minor fixes that should go into the 6.2 release:
- Fix for a memory leak in io-wq worker creation, if we ultimately
end up canceling the worker creation before it gets created (me)
- lockdep annotations for the CQ locking (Pavel)
- A regression fix for CQ timeout handling (Pavel)
- Ring pinning around deferred task_work fix (Pavel)
- A trivial member move in struct io_ring_ctx, saving us some memory
(me)"
* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
io_uring: fix CQ waiting timeout handling
io_uring: move 'poll_multi_queue' bool in io_ring_ctx
io_uring: lockdep annotate CQ locking
io_uring: pin context while queueing deferred tw
io_uring/io-wq: free worker if task_work creation is canceled
|
|
Pull arm TIF_NOTIFY_SIGNAL fixup from Jens Axboe:
"Hui Tang reported a performance regressions with _TIF_WORK_MASK in
newer kernels, which he tracked to a change that went into 5.11. After
this change, we'll call do_work_pending() more often than we need to,
because we're now testing bits 0..15 rather than just 0..7.
Shuffle the bits around to avoid this"
* tag 'tif-notify-signal-2023-01-06' of git://git.kernel.dk/linux:
ARM: renumber bits related to _TIF_WORK_MASK
|
|
Pull ceph fixes from Ilya Dryomov:
"Two file locking fixes from Xiubo"
* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
ceph: avoid use-after-free in ceph_fl_release_lock()
ceph: switch to vfs_inode_has_locks() to fix file lock bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes from Jan Kara:
"Two fixups of the UDF changes that went into 6.2-rc1"
* tag 'fixes_for_v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: initialize newblock to 0
udf: Fix extension of the last extent in the file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression and regular fixes:
- regressions:
- fix assertion condition using = instead of ==
- fix false alert on bad tree level check
- fix off-by-one error in delalloc search during lseek
- fix compat ro feature check at read-write remount
- handle case when read-repair happens with ongoing device replace
- updated error messages"
* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix compat_ro checks against remount
btrfs: always report error in run_one_delayed_ref()
btrfs: handle case when repair happens with dev-replace
btrfs: fix off-by-one in delalloc search during lseek
btrfs: fix false alert on bad tree level check
btrfs: add error message for metadata level mismatch
btrfs: fix ASSERT em->len condition in btrfs_get_extent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- use the correct mask for c.jr/c.jalr when decoding instructions
- build fix for get_user() to avoid a sparse warning
* tag 'riscv-for-linus-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: uaccess: fix type of 0 variable on error in get_user()
riscv, kprobes: Stricter c.jr/c.jalr decoding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfault when trying to process tracepoints present in a
perf.data file and not linked with libtraceevent.
- Fix build on uClibc systems by adding missing sys/types.h include,
that was being obtained indirectly which stopped being the case when
tools/lib/traceevent was removed.
- Don't show commands in 'perf help' that depend on linking with
libtraceevent when not building with that library, which is now a
possibility since we no longer ship a copy in tools/lib/traceevent.
- Fix failure in 'perf test' entry testing the combination of 'perf
probe' user space function + 'perf record' + 'perf script' where it
expects a backtrace leading to glibc's inet_pton() from 'ping' that
now happens more than once with glibc 2.35 for IPv6 addreses.
- Fix for the inet_pton perf test on s/390 where
'text_to_binary_address' now appears on the backtrace.
- Fix build error on riscv due to missing header for 'struct
perf_sample'.
- Fix 'make -C tools perf_install' install variant by not propagating
the 'subdir' to submakes for the 'install_headers' targets.
- Fix handling of unsupported cgroup events when using BPF counters in
'perf stat'.
- Count all cgroups, not just the last one when using 'perf stat' and
combining --for-each-cgroup with --bpf-counters.
This makes the output using BPF counters match the output without
using it, which was the intention all along, the output should be the
same using --bpf-counters or not.
- Fix 'perf lock contention' core dump related to not finding the
"__sched_text_end" symbol on s/390.
- Fix build failure when HEAD is signed: exclude the signature from the
version string.
- Add missing closedir() calls to in perf_data__open_dir(), plugging a
fd leak.
* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Fix build on uClibc systems by adding missing sys/types.h include
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
perf stat: Fix handling of unsupported cgroup events when using BPF counters
perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
perf build: Don't propagate subdir to submakes for install_headers
perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
perf tools: Don't include signature in version strings
perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
perf tools: Fix resources leak in perf_data__open_dir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
"Intel RAPL updates for new model IDs"
* tag 'perf-urgent-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel Emerald Rapids
perf/x86/rapl: Add support for Intel Meteor Lake
perf/x86/rapl: Treat Tigerlake like Icelake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a CFI crash in arm64/sm4 as well as a regression in the
caam driver"
* tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/sm4 - fix possible crash with CFI enabled
crypto: caam - fix CAAM io mem access in blob_gen
|
|
If we delay sending End Transfer for Setup TRB to be prepared, we need
to check if the End Transfer was in preparation for a driver
teardown/soft-disconnect. In those cases, just send the End Transfer
command without delay.
In the case of soft-disconnect, there's a very small chance the command
may not go through immediately. But should it happen, the Setup TRB will
be prepared during the polling of the controller halted state, allowing
the command to go through then.
In the case of disabling endpoint due to reconfiguration (e.g.
set_interface(alt-setting) or usb reset), then it's driven by the host.
Typically the host wouldn't immediately cancel the control request and
send another control transfer to trigger the End Transfer command
timeout.
Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:
drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~~~~~~~~~~~
| devm_clk_get_optional
Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230103121755.956027-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>
|
|
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only gvt-fixes:
- debugfs fixes (Zhenyu)
- fix up for vgpu status (Zhi)
- double free fix in split_2MB_gtt_entry (Zheng)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7cszBkLRvAy6uao@intel.com
|
|
After commit 5f217ccd520f ("fotg210-udc: Support optional external PHY"),
the error code is re-assigned to 0 in fotg210_udc_probe(), if allocate or
map memory fails after the assignment, it can't return an error code. Set
the error code to -ENOMEM to fix this problem.
Fixes: 5f217ccd520f ("fotg210-udc: Support optional external PHY")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221230065427.944586-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a missing sysfs attribute to the int340x thermal driver (Srinivas
Pandruvada)"
* tag 'thermal-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add missing attribute for data rate base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
|
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):
---+-+-----------+-----------+--
100 0 rs1[4:0]!=0 00000 10 : c.jr
100 1 rs1[4:0]!=0 00000 10 : c.jalr
100 0 rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1 rd[4:0]!=0 rs2[4:0]!=0 10 : c.add
The following logic is used to decode c.jr and c.jalr:
insn & 0xf007 == 0x8002 => instruction is an c.jr
insn & 0xf007 == 0x9002 => instruction is an c.jalr
When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.
Correct the decoding by changing the mask from 0xf007 to 0xf07f.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230102160748.1307289-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A reference leak fix, two fixes for using uninitialized variables and
more drivers converted to using immutable irqchips:
- fix a reference leak in gpio-sifive
- fix a potential use of an uninitialized variable in core gpiolib
- fix a potential use of an uninitialized variable in gpio-pca953x
- make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd
and gpio-sprd"
* tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sifive: Fix refcount leak in sifive_gpio_probe
gpio: sprd: Make the irqchip immutable
gpio: pmic-eic-sprd: Make the irqchip immutable
gpio: eic-sprd: Make the irqchip immutable
gpio: pca953x: avoid to use uninitialized value pinctrl
gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
|
|
When sg_alloc_append_table_from_pages() calls to pages_are_mergeable() in
its 'sgt_append->prv' flow to check whether it can merge contiguous pages
into the last SG, it passes the page arguments in the wrong order.
The first parameter should be the next candidate page to be merged to
the last page and not the opposite.
The current code leads to a corrupted SG which resulted in OOPs and
unexpected errors when non-contiguous pages are merged wrongly.
Fix to pass the page parameters in the right order.
Fixes: 1567b49d1a40 ("lib/scatterlist: add check when merging zone device pages")
Link: https://lore.kernel.org/r/20230105112339.107969-1-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix Matrox G200eW initialization failure
- Fix build failure of offb driver when built as module
- Optimize stack usage in omapfb
* tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: avoid stack overflow warning
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
fbdev: atyfb: use strscpy() to instead of strncpy()
fbdev: omapfb: use strscpy() to instead of strncpy()
fbdev: make offb driver tristate
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.
Cc: stable@vger.kernel.org
Fixes: 228339662b398 ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drm-intel-fixes
gvt-fixes-2023-01-05
- Fix one missed unpin in error of intel_vgpu_shadow_mm_pin()
- Fix two debugfs destroy oops issues for vgpu and gvt entries
- Fix one potential double free issue in gtt shadow pt code
- Fix to use atomic bit flag for vgpu status
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7YWoFpz4plnSLCd@zhen-hp.sh.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-04:
amdgpu:
- DCN 3.2 fix
- Display fix
amdkfd:
- Fix kernel warning
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105033839.23711-1-alexander.deucher@amd.com
|
|
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:
fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.
Fixes: b482cd2053e3 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f958f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Several fixes to fix the error path of dma_buf_export, add a missing
structure declaration resulting in a compiler warning, fix the GEM
handle refcounting in panfrost, fix a corrupted image with AFBC on
meson, a memleak in virtio, improper plane width for imx, and a lockup
in drm_sched_entity_kill()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105074909.qd2h23hpxac4lxi7@houat
|
|
Commit 63ffe00d8c93 ("kbuild: Fix running modpost with musl libc")
accidentally turned the unresolved symbol warnings into errors when
vmlinux.o (for in-tree builds) or Module.symver (for external module
builds) is missing.
In those cases, unresolved symbols are expected, but the -w option
is not set because 'missing-input' is referenced before set.
Move $(missing-input) back to the original place. This should be fine
for musl libc because vmlinux.o and -w are not added at the same time.
With this change, -w may be passed twice, but it is not a big deal.
Link: https://lore.kernel.org/all/b56a03b8-2a2a-f833-a5d2-cdc50a7ca2bb@cschramm.eu/
Fixes: 63ffe00d8c93 ("kbuild: Fix running modpost with musl libc")
Reported-by: Christopher Schramm <debian@cschramm.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Samuel Holland <samuel@sholland.org>
|
|
The single *.ko build is broken since commit f65a486821cf ("kbuild:
change module.order to list *.o instead of *.ko").
Fixes: f65a486821cf ("kbuild: change module.order to list *.o instead of *.ko")
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The last fix to iface_count did fix the overcounting issue.
However, during each refresh, we could end up undercounting
the iface_count, if a match was found.
Fixing this by doing increments and decrements instead of
setting it to 0 before each parsing of server interfaces.
Fixes: 096bbeec7bd6 ("smb3: interface count displayed incorrectly")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the server interface for a channel is not active anymore,
we have the logic to select an alternative interface. However
this was not breaking out of the loop as soon as a new alternative
was found. As a result, some interfaces may get refcounted unintentionally.
There was also a bug in checking if we found an alternate iface.
Fixed that too.
Fixes: b54034a73baf ("cifs: during reconnect, update interface if necessary")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Because ICMP handlers run from softirq contexts,
they must not use current thread task_frag.
Previously, all sockets allocated by inet_ctl_sock_create()
would use the per-socket page fragment, with no chance of
recursion.
Fixes: 98123866fcf3 ("Treewide: Stop corrupting socket's task_frag")
Reported-by: syzbot+bebc6f1acdf4cbb79b03@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20230103192736.454149-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().
The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.
Other ULPs may end-up with a double-free at socket disposal time.
We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.
Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.
qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.
An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---
Fixes: c965db4446291 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Rework early_init_dt_scan_chosen() so that the cmdline config options are
always handled.
[commit msg written by Alexander Sverdlin]
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-2-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This reverts commit a7d550f82b445cf218b47a2c1a9c56e97ecb8c7a.
Some arches (PPC at least) don't call early_init_dt_scan_nodes(), so
moving the cmdline processing there breaks them.
Reported-by: Geoff Levand <geoff@infradead.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-1-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This reverts commit de05abe6b9d0fe08f65d744f7f75a4cba4df27ad.
The bug referenced below was bisected to this commit. There has been no
activity toward fixing it in 3 months, so let's revert for now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
