| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: Fix mas_prev() state regression".
Pedro Falcato retported an mprotect regression [1] which was bisected back
to the iterator changes for maple tree. Root cause analysis showed the
mas_prev() running off the end of the VMA space (previous from 0) followed
by mas_find(), would skip the first value.
This patchset introduces maple state underflow/overflow so the sequence of
calls on the maple state will return what the user expects.
Users who encounter this bug may see mprotect(), userfaultfd_register(),
and mlock() fail on VMAs mapped with address 0.
This patch (of 2):
Instead of constantly checking each possibility of the maple state,
create a fast path that will skip over checking unlikely states.
Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: syzbot+55cc72f8cc3a549119df@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d099fa0604f03351@google.com [1]
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Even though we had successfully mapped the relevant page, we would rarely
return success from filemap_map_folio_range(). That leads to falling back
from the VMA lock path to the mmap_lock path, which is a speed &
scalability issue. Found by inspection.
Link: https://lkml.kernel.org/r/20230920035336.854212-1-willy@infradead.org
Fixes: 617c28ecab22 ("filemap: batch PTE mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The elf-fdpic loader hard sets the process personality to either
PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF
binaries (in this case they would be constant displacement compiled with
-pie for example). The problem with that is that it will lose any other
bits that may be in the ELF header personality (such as the "bug
emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a
normal 32bit binary - as opposed to a legacy 26bit address binary. This
matters since start_thread() will set the ARM CPSR register as required
based on this flag. If the elf-fdpic loader loses this bit the process
will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper
three bytes by using the SET_PERSONALITY macro to set it. This macro in
the generic case sets PER_LINUX and preserves the upper bytes.
Architectures can override this for their specific use case, and ARM does
exactly this.
The problem shows up quite easily running under qemu using the ARM
architecture, but not necessarily on all types of real ARM hardware. If
the underlying ARM processor does not support the legacy 26-bit addressing
mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org
Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On no-MMU, /proc/<pid>/maps reads as an empty file. This happens because
find_vma(mm, 0) always returns NULL (assuming no vma actually contains the
zero address, which is normally the case).
To fix this bug and improve the maintainability in the future, this patch
makes the no-MMU implementation as similar as possible to the MMU
implementation.
The only remaining differences are the lack of hold/release_task_mempolicy
and the extra code to shoehorn the gate vma into the iterator.
This has been tested on top of 6.5.3 on an STM32F746.
Link: https://lkml.kernel.org/r/20230915160055.971059-2-ben.wolsieffer@hefring.com
Fixes: 0c563f148043 ("proc: remove VMA rbtree use from nommu")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kernel test robot reported regressions for several benchmarks [1].
The regression are related with commit:
de74976eb65151a2f568e477fc2e0032df5b22b4 ("filemap: add filemap_map_folio_range()")
It turned out that function filemap_map_folio_range() brings these
regressions when handle folio with order0.
Add filemap_map_order0_folio() to handle order0 folio. The benefit
come from two perspectives:
- the code size is smaller (around 126 bytes)
- no loop
Testing showed the regressions reported by 0day [1] all are fixed:
commit 9f1f5b60e76d44fa: parent commit of de74976eb65151a2
commit fbdf9263a3d7fdbd: latest mm-unstable commit
commit 7fbfe2003f84686d: this fixing patch
9f1f5b60e76d44fa fbdf9263a3d7fdbd 7fbfe2003f84686d
---------------- --------------------------- ---------------------------
3843810 -21.4% 3020268 +4.6% 4018708 stress-ng.bad-altstack.ops
64061 -21.4% 50336 +4.6% 66977 stress-ng.bad-altstack.ops_per_sec
1709026 -14.4% 1462102 +2.4% 1750757 stress-ng.fork.ops
28483 -14.4% 24368 +2.4% 29179 stress-ng.fork.ops_per_sec
3685088 -53.6% 1710976 +0.5% 3702454 stress-ng.zombie.ops
56732 -65.3% 19667 +0.7% 57107 stress-ng.zombie.ops_per_sec
61874 -12.1% 54416 +0.4% 62136 vm-scalability.median
13527663 -11.7% 11942117 -0.1% 13513946 vm-scalability.throughput
4.066e+09 -11.7% 3.59e+09 -0.1% 4.061e+09 vm-scalability.workload
[1]:
https://lore.kernel.org/oe-lkp/72e017b9-deb6-44fa-91d6-716ee2c39cbc@intel.com/T/#m7d2bba30f75a9cee8eab07e5809abd9b3b206c84
Link: https://lkml.kernel.org/r/20230914134741.1937654-1-fengwei.yin@intel.com
Fixes: de74976eb65151a2f568e477fc2e0032df5b22b4 ("filemap: add filemap_map_folio_range()")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309111556.b2aa3d7a-oliver.sang@intel.com
Cc: Feng Tang <feng.tang@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The no-MMU implementation of /proc/<pid>/map doesn't normally release
the mmap read lock, because it uses !IS_ERR_OR_NULL(_vml) to determine
whether to release the lock. Since _vml is NULL when the end of the
mappings is reached, the lock is not released.
Reading /proc/1/maps twice doesn't cause a hang because it only
takes the read lock, which can be taken multiple times and therefore
doesn't show any problem if the lock isn't released. Instead, you need
to perform some operation that attempts to take the write lock after
reading /proc/<pid>/maps. To actually reproduce the bug, compile the
following code as 'proc_maps_bug':
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int argc, char *argv[]) {
void *buf;
sleep(1);
buf = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
puts("mmap returned");
return 0;
}
Then, run:
./proc_maps_bug &; cat /proc/$!/maps; fg
Without this patch, mmap() will hang and the command will never
complete.
This code was incorrectly adapted from the MMU implementation, which at
the time released the lock in m_next() before returning the last entry.
The MMU implementation has diverged further from the no-MMU version since
then, so this patch brings their locking and error handling into sync,
fixing the bug and hopefully avoiding similar issues in the future.
Link: https://lkml.kernel.org/r/20230914163019.4050530-2-ben.wolsieffer@hefring.com
Fixes: 47fecca15c09 ("fs/proc/task_nommu.c: don't use priv->task->mm")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Breno and Josef report a deadlock scenario from cgroup reclaim
re-entering the filesystem:
[ 361.546690] ======================================================
[ 361.559210] WARNING: possible circular locking dependency detected
[ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E
[ 361.589704] ------------------------------------------------------
[ 361.602277] find/9315 is trying to acquire lock:
[ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0
[ 361.631437]
[ 361.631437] but task is already holding lock:
[ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40
[ 362.904457] mutex_lock_nested+0x1c/0x30
[ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0
[ 362.922460] btrfs_evict_inode+0x301/0x770
[ 362.982726] evict+0x17c/0x380
[ 362.988944] prune_icache_sb+0x100/0x1d0
[ 363.005559] super_cache_scan+0x1f8/0x260
[ 363.013695] do_shrink_slab+0x2a2/0x540
[ 363.021489] shrink_slab_memcg+0x237/0x3d0
[ 363.050606] shrink_slab+0xa7/0x240
[ 363.083382] shrink_node_memcgs+0x262/0x3b0
[ 363.091870] shrink_node+0x1a4/0x720
[ 363.099150] shrink_zones+0x1f6/0x5d0
[ 363.148798] do_try_to_free_pages+0x19b/0x5e0
[ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370
[ 363.190575] reclaim_high+0x16f/0x1f0
[ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270
[ 363.246678] try_charge_memcg+0xaf2/0xc70
[ 363.304151] charge_memcg+0xf0/0x350
[ 363.320070] __mem_cgroup_charge+0x28/0x40
[ 363.328371] __filemap_add_folio+0x870/0xd50
[ 363.371303] filemap_add_folio+0xdd/0x310
[ 363.399696] __filemap_get_folio+0x2fc/0x7d0
[ 363.419086] pagecache_get_page+0xe/0x30
[ 363.427048] alloc_extent_buffer+0x1cd/0x6a0
[ 363.435704] read_tree_block+0x43/0xc0
[ 363.443316] read_block_for_search+0x361/0x510
[ 363.466690] btrfs_search_slot+0xc8c/0x1520
This is caused by the mem_cgroup_handle_over_high() not respecting the
gfp_mask of the allocation context. We used to only call this function on
resume to userspace, where no locks were held. But c9afe31ec443 ("memcg:
synchronously enforce memory.high for large overcharges") added a call
from the allocation context without considering the gfp.
Link: https://lkml.kernel.org/r/20230914152139.100822-1-hannes@cmpxchg.org
Fixes: c9afe31ec443 ("memcg: synchronously enforce memory.high for large overcharges")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change the comment to match the function name that the SYSCALL_DEFINE()
macros generate to prevent a kernel-doc warning.
kernel/pid.c:628: warning: expecting prototype for pidfd_open(). Prototype was for sys_pidfd_open() instead
Link: https://lkml.kernel.org/r/20230912060822.2500-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use proper kernel-doc notation to prevent build warnings:
lib/argv_split.c:36: warning: Function parameter or member 'argv' not described in 'argv_free'
lib/argv_split.c:61: warning: No description found for return value of 'argv_split'
Link: https://lkml.kernel.org/r/20230912060838.3794-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Describe missing function parameters to prevent kernel-doc warnings:
lib/scatterlist.c:288: warning: Function parameter or member 'first_chunk' not described in '__sg_alloc_table'
lib/scatterlist.c:800: warning: Function parameter or member 'flags' not described in 'sg_miter_start'
Link: https://lkml.kernel.org/r/20230912060848.4673-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/${pid}/smaps_rollup is not empty file even if process's address
space is empty, update the test.
Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Revert 11f956538c07 ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].
Fixes: 11f956538c07 ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted. If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.
commit 58e2847ad2e6 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`. It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD. Therefore selftests
that use ASan started failing.
Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option. Note this is already the default for
Clang, but not got GCC.
Test output sample for failing case:
TAP version 13
1..3
# timeout set to 300
# selftests: openat2: openat2_test
# ==4052==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 1 selftests: openat2: openat2_test # exit=1
# timeout set to 300
# selftests: openat2: resolve_test
# ==4070==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 2 selftests: openat2: resolve_test # exit=1
Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2e6 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A previous commit changed the arguments to task_work_cancel_match(), but
didn't document all of them.
Link: https://lkml.kernel.org/r/93938bff-baa3-4091-85f5-784aae297a07@kernel.dk
Fixes: c7aab1a7c52b ("task_work: add helper for more targeted task_work canceling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309120307.zis3yQGe-lkp@intel.com/
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
bypasses the pcplist on lock contention and returns the page directly to
the buddy list of the page's migratetype.
For pages that don't have their own pcplist, such as CMA and HIGHATOMIC,
the migratetype is temporarily updated such that the page can hitch a ride
on the MOVABLE pcplist. Their true type is later reassessed when flushing
in free_pcppages_bulk(). However, when lock contention is detected after
the type was already overridden, the bypass will then put the page on the
wrong buddy list.
Once on the MOVABLE buddy list, the page becomes eligible for fallbacks
and even stealing. In the case of HIGHATOMIC, otherwise ineligible
allocations can dip into the highatomic reserves. In the case of CMA, the
page can be lost from the CMA region permanently.
Use a separate pcpmigratetype variable for the pcplist override. Use the
original migratetype when going directly to the buddy. This fixes the bug
and should make the intentions more obvious in the code.
Originally sent here to address the HIGHATOMIC case:
https://lore.kernel.org/lkml/20230821183733.106619-4-hannes@cmpxchg.org/
Changelog updated in response to the CMA-specific bug report.
[mgorman@techsingularity.net: updated changelog]
Link: https://lkml.kernel.org/r/20230911181108.GA104295@cmpxchg.org
Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Joe Liu <joe.liu@mediatek.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When __ioremap_caller() was replaced by ioremap_prot(), the __ref
annotation added in commit af1415314a4190b8 ("sh: Flag __ioremap_caller()
__init_refok.") was removed, causing a modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: ioremap_prot+0x88 (section: .text) -> ioremap_fixed (section: .init.text)
ioremap_prot() calls ioremap_fixed() (which is marked __init), but only
before mem_init_done becomes true, so this is safe. Hence fix this by
re-adding the lost __ref.
Link: https://lkml.kernel.org/r/20230911093850.1517389-1-geert+renesas@glider.be
Fixes: 0453c9a78015cb22 ("sh: mm: convert to GENERIC_IOREMAP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a cold functions related false-positive objtool warning that
triggers on Clang"
* tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix _THIS_IP_ detection for cold functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull WARN fix from Ingo Molnar:
"Fix a missing preempt-enable in the WARN() slowpath"
* tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
panic: Reenable preemption in WARN slowpath
|
|
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f947 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e1690 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes"
* tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd:
ksmbd: fix passing freed memory 'aux_payload_buf'
ksmbd: remove unneeded mark_inode_dirty in set_info_sec()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
|
|
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:
$ readelf -S purgatory.ro | grep " .text"
[ 1] .text PROGBITS 0000000000000000 00000040
[ 7] .text.purgatory PROGBITS 0000000000000000 000020e0
[ 9] .text.warn PROGBITS 0000000000000000 000021c0
[13] .text.sha256_upda PROGBITS 0000000000000000 000022f0
[15] .text.sha224_upda PROGBITS 0000000000000000 00002be0
[17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0
[19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0
This causes WARNING from kexec_purgatory_setup_sechdrs():
WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
kexec_load_purgatory+0x37f/0x390
Fix this by disabling LTO for purgatory.
[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]
We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.
Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
|
|
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
|
|
Commit 408579cd627a ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).
That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded". After the change, it's always 0 for success, and the lock
will have been released if requested).
This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value
test fairly subtle, since everything continues to work.
Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.
Revert that one line of the change back to the original logic.
Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Reported-bisected-and-tested-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"16 small(ish) fixes all in drivers.
The major fixes are in pm8001 (fixes MSI-X issue going back to its
origin), the qla2xxx endianness fix, which fixes a bug on big endian
and the lpfc ones which can cause an oops on module removal without
them"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports
scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
scsi: target: core: Fix target_cmd_counter leak
scsi: pm8001: Setup IRQs on resume
scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
scsi: qedf: Add synchronization between I/O completions and abort
scsi: target: Replace strlcpy() with strscpy()
scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir()
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
scsi: qla2xxx: Correct endianness for rqstlen and rsplen
scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
scsi: megaraid_sas: Fix deadlock on firmware crashdump
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1"
* tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems"
* tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V
driver core: return an error when dev_set_name() hasn't happened
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all.
To fix this, the Kconfig change needs to be reverted and a future set
of fixes for the ioport dependancies will show up in 6.7-rc1 (there's
no rush for them.)
This has been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "comedi: add HAS_IOPORT dependencies"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The main thing is the removal of 'probe_new' because all i2c client
drivers are converted now. Thanks Uwe, this marks the end of a long
conversion process.
Other than that, we have a few Kconfig updates and driver bugfixes"
* tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Fix the kernel-doc warnings
i2c: aspeed: Reset the i2c controller when timeout occurs
i2c: I2C_MLXCPLD on ARM64 should depend on ACPI
i2c: Make I2C_ATR invisible
i2c: Drop legacy callback .probe_new()
w1: ds2482: Switch back to use struct i2c_driver's .probe()
|
|
Currently, we fetch sense data for a _successful_ command if either:
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
This means that case 2) will trigger for a non-NCQ command which has
ATA_SENSE bit set, regardless if CDL is enabled or not.
This decision was by design. If the device reports that it has sense data
available, it makes sense to fetch that sense data, since the sk/asc/ascq
could be important information regardless if CDL is enabled or not.
However, the fetching of sense data for a successful command is done via
ATA EH. Considering how intricate the ATA EH is, we really do not want to
invoke ATA EH unless absolutely needed.
Before commit 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL
commands using policy 0xD") we never fetched sense data for successful
commands.
In order to not invoke the ATA EH unless absolutely necessary, even if the
device claims support for sense data reporting, only fetch sense data for
successful (NCQ and non-NCQ commands) commands that are using CDL.
[Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL
instead of the device support for CDL, which is implied for commands
using CDL.
Fixes: 3ac873c76d79 ("ata: libata-core: fix when to fetch sense data for successful commands")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
commit 1e641060c4b5 ("libata: clear eh_info on reset completion") added
a workaround that broke the retry mechanism in ATA EH.
Tejun himself suggested to remove this workaround when it was identified
to cause additional problems:
https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/
He even said:
"Hmm... it seems I wasn't thinking straight when I added that work around."
https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/
While removing the workaround solved the issue, however, the workaround was
kept to avoid "spurious hotplug events during reset", and instead another
workaround was added on top of the existing workaround in commit
8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Because these IRQs happened when the port was frozen, we know that they
were actually a side effect of PxIS and IS.IPS(x) not being cleared before
the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear
pending interrupt status"), so these workarounds can now be removed.
Since commit 1e641060c4b5 ("libata: clear eh_info on reset completion") has
now been reverted, the ATA EH retry mechanism is functional again, so there
is once again no need to thaw the port more than once in ata_eh_reset().
This reverts "the workaround on top of the workaround" introduced in commit
8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Use correct order when encoding NFSv4 RENAME change_info
- Fix a potential oops during NFSD shutdown
* tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix possible oops when nfsd/pool_stats is closed.
nfsd: fix change_info in NFSv4 RENAME replies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the handling of block devices in the test_resume mode of
hibernation (Chen Yu)"
* tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix the exclusive get block device in test_resume mode
PM: hibernate: Rename function parameter from snapshot_test to exclusive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a thermal core breakage introduced by one of the recent
changes, amend those changes by adding 'const' to a new callback
argument and fix two memory leaks.
Specifics:
- Unbreak disabled trip point check in handle_thermal_trip() that may
cause it to skip enabled trip points (Rafael Wysocki)
- Add missing of_node_put() to of_find_trip_id() and
thermal_of_for_each_cooling_maps() that each break out of a
for_each_child_of_node() loop without dropping the reference to the
child object (Julia Lawall)
- Constify the recently added trip argument of the .get_trend()
thermal zone callback (Rafael Wysocki)"
* tag 'thermal-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix disabled trip point check in handle_thermal_trip()
thermal: Constify the trip argument of the .get_trend() zone callback
thermal/of: add missing of_node_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core retrieve_deps() UAF race due to missing locking of a DM
table's list of devices that is managed using dm_{get,put}_device.
- Revert DM core's half-baked RCU optimization if IO submitter has set
REQ_NOWAIT. Can be revisited, and properly justified, after
comprehensively auditing all of DM to also pass GFP_NOWAIT for any
allocations if REQ_NOWAIT used.
* tag 'for-6.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: don't attempt to queue IO under RCU protection
dm: fix a race condition in retrieve_deps
|
|
Pull block fixes from Jens Axboe:
- NVMe pull via Keith:
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)
- MD pull via Song fixing regressions with both 6.5 and 6.6
- Fix a use-after-free regression in resizing blk-mq tags (Chengming)
* tag 'block-6.6-2023-09-15' of git://git.kernel.dk/linux:
nvme: avoid bogus CRTO values
md: Put the right device in md_seq_next
nvme-pci: do not set the NUMA node of device if it has none
blk-mq: fix tags UAF when shrinking q->nr_hw_queues
md/raid1: fix error: ISO C90 forbids mixed declarations
md: fix warning for holder mismatch from export_rdev()
md: don't dereference mddev after export_rdev()
nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
nvme: host: hwmon: constify pointers to hwmon_channel_info
nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing a regression with poll first, recvmsg, and
using a provided buffer"
* tag 'io_uring-6.6-2023-09-15' of git://git.kernel.dk/linux:
io_uring/net: fix iter retargeting for selected buf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A change applied to v6.5 kernel brings an issue that usual GFP
allocation is done in atomic context under acquired spin-lock. Let us
revert it"
* tag 'firewire-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
Revert "firewire: core: obsolete usage of GFP_ATOMIC at building node tree"
|
|
Pull drm fixes from Dave Airlie:
"Regular rc2 fixes pull, mostly made up of amdgpu stuff, one i915, and
a bunch of others, one vkms locking violation is reverted.
connector:
- doc fix
exec:
- workaround lockdep issue
tests:
- fix a UAF
vkms:
- revert hrtimer fix
fbdev:
- g364fb: fix build failure with mips
i915:
- Only check eDP HPD when AUX CH is shared.
amdgpu:
- GC 9.4.3 fixes
- Fix white screen issues with S/G display on system with >= 64G of ram
- Replay fixes
- SMU 13.0.6 fixes
- AUX backlight fix
- NBIO 4.3 SR-IOV fixes for HDP
- RAS fixes
- DP MST resume fix
- Fix segfault on systems with no vbios
- DPIA fixes
amdkfd:
- CWSR grace period fix
- Unaligned doorbell fix
- CRIU fix for GFX11
- Add missing TLB flush on gfx10 and newer
radeon:
- make fence wait in suballocator uninterrruptable
gm12u320:
- Fix the timeout usage for usb_bulk_msg()"
* tag 'drm-fixes-2023-09-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/tests: helpers: Avoid a driver uaf
Revert "drm/vkms: Fix race-condition between the hrtimer and the atomic commit"
drm/amdkfd: Insert missing TLB flush on GFX10 and later
drm/i915: Only check eDP HPD when AUX CH is shared
drm/amd/display: Fix 2nd DPIA encoder Assignment
drm/amd/display: Add DPIA Link Encoder Assignment Fix
drm/amd/display: fix replay_mode kernel-doc warning
drm/amdgpu: Handle null atom context in VBIOS info ioctl
drm/amdkfd: Checkpoint and restore queues on GFX11
drm/amd/display: Adjust the MST resume flow
drm/amdgpu: fallback to old RAS error message for aqua_vanjaram
drm/amdgpu/nbio4.3: set proper rmmio_remap.reg_offset for SR-IOV
drm/amdgpu/soc21: don't remap HDP registers for SR-IOV
drm/amd/display: Don't check registers, if using AUX BL control
drm/amdgpu: fix retry loop test
drm/amd/display: Add dirty rect support for Replay
Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"
drm/amd/display: fix the white screen issue when >= 64GB DRAM
drm/amdkfd: Update CU masking for GFX 9.4.3
drm/amdkfd: Update cache info reporting for GFX v9.4.3
...
|
