Age | Commit message (Collapse) | Author | Files | Lines |
|
In mlx5, there is a devlink instance created for PCI device. Also, one
separate devlink instance is created for auxiliary device that
represents the netdev of uplink port. This relation is currently
invisible to the devlink user.
Benefit from the rel infrastructure and allow for nested devlink
instance to set the relationship for the nested-in devlink instance.
Note that there may be many nested instances, therefore use xarray to
hold the list of rel_indexes for individual nested instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Benefit from the newly introduced rel infrastructure, treat the linecard
nested devlink instances in the same way as port function instances.
Convert the code to use the rel infrastructure.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Benefit from the existence of internal mlx5 notifier and extend it by
event MLX5_DRIVER_EVENT_SF_PEER_DEVLINK. Use this event from SF
auxiliary device probe/remove functions to pass the registered SF
devlink instance to the SF representor.
Process the new event in SF representor code and call
devl_port_fn_devlink_set() to do the assignments. Implement this in work
to avoid possible deadlock when probe/remove function of SF may be
called with devlink instance lock held during devlink reload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.
Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.
This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.
Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is a bit tricky to maintain relationship between devlink objects and
nested devlink instances due to following aspects:
1) Locking. It is necessary to lock the devlink instance that contains
the object first, only after that to lock the nested instance.
2) Lifetimes. Objects (e.g devlink port) may be removed before
the nested devlink instance.
3) Notifications. If nested instance changes (e.g. gets
registered/unregistered) the nested-in object needs to send
appropriate notifications.
Resolve this by introducing an xarray that holds 1:1 relationships
between devlink object and related nested devlink instance.
Use that xarray index to get the object/nested devlink instance on
the other side.
Provide necessary helpers:
devlink_rel_nested_in_add/clear() to add and clear the relationship.
devlink_rel_nested_in_notify() to call the nested-in object to send
notifications during nested instance register/unregister/netns
change.
devlink_rel_devlink_handle_put() to be used by nested-in object fill
function to fill the nested handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the next patch is going to call this helper with need to fill another
type of nested attribute, pass it over function arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the next patch is going to call this helper out of the linecard.c,
move to netlink.c.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If netns of devlink instance and nested devlink instance differs,
put netnsid attr to indicate that.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Historically, the shared devlink_mutex prevented devlink instances from
being registered/unregistered during another devlink instance reload
operation. However, devlink_muxex is gone for some time now, this
limitation is no longer needed. Lift it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The eswitch disable call does removal of all representors. Do that
before clearing the SF device table and maintain the same flow as during
SF devlink port removal, where the representor is removed before
the actual SF is removed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of exposing linecard struct, expose a simple helper to get the
linecard index, which is all is needed outside linecard.c. Move the
linecard struct to linecard.c and keep it private similar to the rest of
the devlink objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When operating in fixed phy mode and if there is repeated open/close
phy test cases, everytime the fixed phy is registered as a new phy
which leads to overrun after 32 iterations. It is solved by adding
fixed_phy_unregister() in the phy_close path.
In phy_close path, netdev->phydev cannot be used directly in
fixed_phy_unregister() due to two reasons,
- netdev->phydev is set to NULL in phy_disconnect()
- fixed_phy_unregister() can be called only after phy_disconnect()
So saving the netdev->phydev in local variable 'phydev' and
passing it to phy_disconnect().
Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vadim Fedorenko says:
====================
Create common DPLL configuration API
Implement common API for DPLL configuration and status reporting.
The API utilises netlink interface as transport for commands and event
notifications. This API aims to extend current pin configuration
provided by PTP subsystem and make it flexible and easy to cover
complex configurations.
Netlink interface is based on ynl spec, it allows use of in-kernel
tools/net/ynl/cli.py application to control the interface with properly
formated command and json attribute strings. Here are few command
examples of how it works with `ice` driver on supported NIC:
- dump dpll devices:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--dump device-get
[{'clock-id': 4658613174691613800,
'id': 0,
'lock-status': 'locked-ho-acq',
'mode': 'automatic',
'mode-supported': ['automatic'],
'module-name': 'ice',
'type': 'eec'},
{'clock-id': 4658613174691613800,
'id': 1,
'lock-status': 'locked-ho-acq',
'mode': 'automatic',
'mode-supported': ['automatic'],
'module-name': 'ice',
'type': 'pps'}]
- get single pin info:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":2}'
{'board-label': 'C827_0-RCLKA',
'clock-id': 4658613174691613800,
'capabilities': 6,
'frequency': 1953125,
'id': 2,
'module-name': 'ice',
'parent-device': [{'direction': 'input',
'parent-id': 0,
'prio': 9,
'state': 'disconnected'},
{'direction': 'input',
'parent-id': 1,
'prio': 9,
'state': 'disconnected'}],
'type': 'mux'}
- set pin's state on dpll:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "state":2}}'
- set pin's prio on dpll:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "prio":4}}'
- set pin's state on parent pin:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":13, "parent-pin":{"parent-id":2, "state":1}}'
Changelog:
v7 -> v8:
- rebase on top of net-next
- no functional changes in patchset
v6 -> v7:
- use unique id in references array to prevent possible crashes
v5 -> v6:
- change dpll-caps to pin capabilities and adjust enum accordingly
- remove dpll.h from netdevice.h
v4 -> v5:
- separate namespace for pin attributes
- small fixes, more details in the patches
v3 -> v4:
- rebase on top of net-next
- fix flag usage in ice
v2 -> v3:
- more style and warning fixes
- details in per-patch logs
v1 -> v2:
- remove FREERUN/DETACHED mode
- reorder functions in commits not to depend on files introduced in
future commits
- style and warning fixes
v9 RFC -> v1:
- Merge header patch into the patches where the actual functions are
implemented
- Address comments from previous reviews
- Per patch change log contains more details
RFC versions:
v8 -> v9:
[00/10] Create common DPLL configuration API
- update examples to reflect new pin-parent nest split
[01/10] dpll: documentation on DPLL subsystem interface
- fix docs build warnings
- separate netlink command/attribute list
- replace enum description with uapi header
- add brief explanation what is a DPLL
- fix EOPNOTSUPP typo
- fix typo .state_get -> .state_on_dpll_get
[02/10] dpll: spec: Add Netlink spec in YAML
- regenerate policy max values
- add missing enum descriptions
- split pin-parent nest:
- pin-parent-device - for configuration of pin-device tuple
- pin-parent-pin - for configuration od pin-pin tuple
- fix typos:
- s/working-modes/working modes/
- s/differentiate/differentiates/
- s/valid input, auto selected by dpll/input pin auto selected by dpll/
- remove FREERUN and HOLDOVER modes
[03/10] dpll: core: Add DPLL framework base functions
- fix description in spdx header.
- remove refcount check if refcount was already set
- do not validate dpll ptr in dpll_device_put(..)
- fix return -ENOMEM on failed memory alloc
- do not validate pin ptr in dpll_pin_put(..)
- return -EINVAL in case of module/clock_id mismatch
- do not {} around one-line xa_for_each() macro
- move dpll_<x>_registration structs to dpll_core.c
- rephrase doc comment on device and pin id struct members
- remove ref in case of memory allocation fail
- check for required ops on pin/device registration
- mark pin with DPLL_REGISTERED once pin is registered with dpll
[04/10] dpll: netlink: Add DPLL framework base functions
- fix pin-id-get/device-id-get behavior
- reshuffle order of functions
- avoid forward declarations
- functions for adding pin/device handle next to each other
- pass ops callback return values to the user
- remove dpll_cmd_pin_fill_details(..) function, merge the code into
__dpll_cmd_pin_dump_one(..)
- rename __dpll_cmd_pin_dump_one() to dpll_cmd_pin_get_one()
- use WARN_ON macro when dpll ref is missing
- remove redundant pin's dpll list not empty check
- remove double spaces inside if statement
- add extack message when set command is not possible
- do not return error when callback is not required
- WARN_ON missing ops moved to dpll_core.c
- use DPLL_REGISTERED if pin was registered with dpll
- fix pin-id-get return and add extack errors
- fix device-id-get return and add extack errors
- drop pointless init of variables
- add macro for iterating over marked pins/devices
- move dpll_set_from_nlattr() for consistent order
- use GENL_REQ_ATTR_CHECK() for checking attibute presence
- fill extack if pin/device was not found
- drop pointless init of variables
- WARN_ON if dpll not registered on send event
- rename goto labels to indicate error path
- fix docs
- drop pointless init of variables
- verify pin in notify with a mark
- prevent ops->mode_set call if missing callback
- move static dpll_msg_add_pin_handle() from pin<->netdev patch
- split pin-parent nest:
- pin-parent-device - for configuration of pin-device tuple
- pin-parent-pin - for configuration od pin-pin tuple
[06/10] netdev: expose DPLL pin handle for netdevice
- net_device->dpll_pin is only valid if IS_ENABLED(CONFIG_DPLL) fix the
code in net/core/rtnetlink.c to respect that.
- move dpll_msg_add_pin_handle to "dpll: netlink" patch + export the
function with this patch
[07/10] ice: add admin commands to access cgu configuration
- rename MAX_NETLIST_SIZE -> ICE_MAX_NETLIST_SIZE
- simplify function: s64 convert_s48_to_s64(s64 signed_48)
- do not assign 0 to field that is already 0
[08/10] ice: implement dpll interface to control cgu
- drop pointless 0 assignement
- ice_dpll_init(..) returns void instead of int
- fix context description of the functions
- fix ice_dpll_init(..) traces
- fix use package_label instead pf board_label for rclk pin
- be consistent on cgu presence naming
- remove indent in ice_dpll_deinit(..)
- remove unused struct field lock_err_num
- fix kworker resched behavior
- remove debug log from ice_dpll_deinit_worker(..)
- reorder ice internal functions
- release resources directly on error path
- remove redundant NULL checks when releasing resources
- do not assign NULL to pointers after releasing resources
- simplify variable assignement
- fix 'int ret;' declarations across the ice_dpll.c
- remove leftover ice_dpll_find(..)
- get pf pointer from dpll_priv without type cast
- improve error reporting
- fix documentation
- fix ice_dpll_update_state(..) flow
- fix return in case out of range prio set
v7 -> v8:
[0/10] Create common DPLL configuration API
- reorder the patches in patch series
- split patch "[RFC PATCH v7 2/8] dpll: Add DPLL framework base functions"
into 3 smaller patches for easier review:
- [03/10] dpll: core: Add DPLL framework base functions
- [04/10] dpll: netlink: Add DPLL framework base functions
- [05/10] dpll: api header: Add DPLL framework base
- add cli.py usage examples in commit message
[01/10] dpll: documentation on DPLL subsystem interface
- fix DPLL_MODE_MANUAL documentation
- remove DPLL_MODE_NCO
- remove DPLL_LOCK_STATUS_CALIBRATING
- add grepability Use full names of commands, attributes and values of
dpll subsystem in the documentation
- align documentation with changes introduced in v8
- fix typos
- fix phrases to better show the intentions
- move dpll.rst to Documentation/driver-api/
[02/10] dpll: spec: Add Netlink spec in YAML
- remove unspec attribute values
- add 10 KHZ and 77,5 KHZ frequency defines
- fix documentation
- remove assigned values from subset attributes
- reorder dpll attributes
- fix `device` nested attribute usage, device get is not used on pin-get
- temperature with 3 digit float precision
- remove enum from subset definitions
- move pin-direction to pin-dpll tuple/subset
- remove DPLL_MODE_NCO
- remove DPLL_LOCK_STATUS_CALIBRATING
- fix naming scheme od notification interface functions
- separate notifications for pins
- rename attribute enum name: dplla -> dpll_a
- rename pin-idx to pin-id
- remove attributes: pin-parent-idx, device
- replace bus-name and dev-name attributes with module-name
- replace pin-label with 3 new attributes: pin-board-label,
pin-panel-label, pin-package-label
- add device-id-get and pin-id-get commands
- remove rclk-dev-name atribute
- rename DPLL_PIN_DIRECTION_SOURCE -> DPLL_PIN_DIRECTION_INPUT
[03/10] dpll: core: Add DPLL framework base functions
[04/10] dpll: netlink: Add DPLL framework base functions
[05/10] dpll: api header: Add DPLL framework base
- remove unspec attributes after removing from dpll netlink spec
- move pin-direction to pin-dpll tuple
- pass parent_priv on state_on_pin_<get/set>
- align with new notification definitions from netlink spec
- use separated notifications for dpll pins and devices
- format notification messages as corresponding get netlink commands
- rename pin-idx to pin-id
- remove attributes pin-parent-idx, device
- use DPLL_A_PIN_PARENT to hold information on parent pin or dpll device
- refactor lookup for pins and dplls for dpll subsystem
- replace bus-name, dev-name with module-name
- replace pin-label with 3 new attributes: pin-board-label,
pin-panel-label, pin-package-label
- add device-id-get and pin-id-get commands
- rename dpll_xa_lock to dpll_lock
- improve doxygen in dpll_core.c
- remove unused parent and dev fields from dpll_device struct
- use u32 for pin_idx in dpll_pin_alloc
- use driver provided pin properties struct
- verify pin/dpll owner on registering pin
- remove const arg modifier for helper _priv functions
- remove function declaration _get_by_name()
- update SPDX headers
- parse netlink set attributes with nlattr array
- remove rclk-dev-name attribute
- remove device pointer from dpll_pin_register/dpll_device_register
- remove redundant doxygen from dpll header
- use module_name() to get name of module
- add missing/remove outdated kdocs
- fix call frequency_set only if available
- fix call direction_set only for pin-dpll tuple
[06/10] netdev: expose DPLL pin handle for netdevice
- rebased on top of v8 changes
- use dpll_msg_add_pin_handle() in dpll_pin_find_from_nlattr()
and dpll_msg_add_pin_parents()
- fixed handle to use DPLL_A_PIN_ID and removed temporary comments
- added documentation record for dpll_pin pointer
- fixed compilation of net/core/dev.c when CONFIG_DPLL is not enabled
- adjusted patch description a bit
[07/10] ice: add admin commands to access cgu configuration
- Remove unspec attributes after removing from dpll netlink spec.
[08/10] ice: implement dpll interface to control cgu
- remove unspec attributes
- do not store pin flags received in set commands
- use pin state field to provide pin state to the caller
- remove include of uapi header
- remove redundant check against null arguments
- propagate lock function return value to the caller
- use switch case instead of if statements
- fix dev_dbg to dev_err for error cases
- fix dpll/pin lookup on dpll subsytem callbacks
- fix extack of dpll subsystem callbacks
- remove double negation and variable cast
- simplify ice_dpll_pin_state_set function
- pass parent_priv on state_on_pin_<get/set>
- remove parent hw_idx lookup
- fix use const qualifier for dpll/dpll_pin ops
- fix IS_ERR macros usage in ice_dpll
- add notify previous source state change
- fix mutex locking on releasing pins
- use '|=' instead of '+=' when modifing capabilities field
- rename ice_dpll_register_pins function
- clock_id function to return clock ID on the stack instead of using
an output variable
- DPLL_LOCK_STATUS_CALIBRATING was removed, return:
DPLL_LOCK_STATUS_LOCKED - if dpll was locked
DPLL_LOCK_STATUS_LOCKED_HO_ACQ - if dpll was locked and holdover is
acquired
- propagate and use dpll_priv to obtain pf pointer in corresponding
functions.
- remove null check for pf pointer
- adapt to `dpll: core: fix notification scheme`
- expose pf related pin to corresponding netdevice
- fix dpll init error path
- fix dpll pins naming scheme `source` -> `input`
- replace pin-label with pin-board-label
- dpll remove parent and dev fields from dpll_device
- remove device pointer from dpll_pin_register/dpll_device_register
- rename DPLL_PIN_DIRECTION_SOURCE -> DPLL_PIN_DIRECTION_INPUT
[09/10] ptp_ocp: implement DPLL ops
- replace pin-label with pin-board-label
- dpll remove parent and dev fields from dpll_device
- remove device pointer from dpll_pin_register/dpll_device_register
- rename DPLL_PIN_DIRECTION_SOURCE -> DPLL_PIN_DIRECTION_INPUT
[10/10] mlx5: Implement SyncE support using DPLL infrastructure
- rebased on top of v8 changes:
- changed notification scheme
- no need to fill pin label
- implemented locked_ho_acq status
- rename DPLL_PIN_DIRECTION_SOURCE -> DPLL_PIN_DIRECTION_INPUT
- remove device pointer from dpll_pin_register/dpll_device_register
- fixed MSEES register writes
- adjusted pin state and lock state values reported
- fixed a white space issue
v6 -> v7:
* YAML spec:
- remove nested 'pin' attribute
- clean up definitions on top of the latest changes
* pin object:
- pin xarray uses id provided by the driver
- remove usage of PIN_IDX_INVALID in set function
- source_pin_get() returns object instead of idx
- fixes in frequency support API
* device and pin operations are const now
* small fixes in naming in Makefile and in the functions
* single mutex for the subsystem to avoid possible ABBA locks
* no special *_priv() helpers anymore, private data is passed as void*
* no netlink filters by name anymore, only index is supported
* update ptp_ocp and ice drivers to follow new API version
* add mlx5e driver as a new customer of the subsystem
v5 -> v6:
* rework pin part to better fit shared pins use cases
* add YAML spec to easy generate user-space apps
* simple implementation in ptp_ocp is back again
v4 -> v5:
* fix code issues found during last reviews:
- replace cookie with clock id
- follow one naming schema in dpll subsys
- move function comments to dpll_core.c, fix exports
- remove single-use helper functions
- merge device register with alloc
- lock and unlock mutex on dpll device release
- move dpll_type to uapi header
- rename DPLLA_DUMP_FILTER to DPLLA_FILTER
- rename dpll_pin_state to dpll_pin_mode
- rename DPLL_MODE_FORCED to DPLL_MODE_MANUAL
- remove DPLL_CHANGE_PIN_TYPE enum value
* rewrite framework once again (Arkadiusz)
- add clock class:
Provide userspace with clock class value of DPLL with dpll device
dump netlink request. Clock class is assigned by driver allocating
a dpll device. Clock class values are defined as specified in:
ITU-T G.8273.2/Y.1368.2 recommendation.
- dpll device naming schema use new pattern:
"dpll_%s_%d_%d", where:
- %s - dev_name(parent) of parent device,
- %d (1) - enum value of dpll type,
- %d (2) - device index provided by parent device.
- new muxed/shared pin registration:
Let the kernel module to register a shared or muxed pin without
finding it or its parent. Instead use a parent/shared pin
description to find correct pin internally in dpll_core, simplifing
a dpll API
* Implement complex DPLL design in ice driver (Arkadiusz)
* Remove ptp_ocp driver from the series for now
v3 -> v4:
* redesign framework to make pins dynamically allocated (Arkadiusz)
* implement shared pins (Arkadiusz)
v2 -> v3:
* implement source select mode (Arkadiusz)
* add documentation
* implementation improvements (Jakub)
v1 -> v2:
* implement returning supported input/output types
* ptp_ocp: follow suggestions from Jonathan
* add linux-clk mailing list
v0 -> v1:
* fix code style and errors
* add linux-arm mailing list
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement SyncE support using newly introduced DPLL support.
Make sure that each PFs/VFs/SFs probed with appropriate capability
will spawn a dpll auxiliary device and register appropriate dpll device
and pin instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement basic DPLL operations in ptp_ocp driver as the
simplest example of using new subsystem.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Control over clock generation unit is required for further development
of Synchronous Ethernet feature. Interface provides ability to obtain
current state of a dpll, its sources and outputs which are pins, and
allows their configuration.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add firmware admin command to access clock generation unit
configuration, it is required to enable Extended PTP and SyncE features
in the driver.
Add definitions of possible hardware variations of input and output pins
related to clock generation unit and functions to access the data.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case netdevice represents a SyncE port, the user needs to understand
the connection between netdevice and associated DPLL pin. There might me
multiple netdevices pointing to the same pin, in case of VF/SF
implementation.
Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to
how it is implemented for devlink port. Add a struct dpll_pin pointer
to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set()
and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear
the DPLL pin relationship to netdev.
Note that during the lifetime of struct dpll_pin the pin handle does not
change. Therefore it is save to access it lockless. It is drivers
responsibility to call netdev_dpll_pin_clear() before dpll_pin_put().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this framework.
Implement dpll netlink framework functions for enablement of dpll
subsystem netlink family.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this framework.
Implement core framework functions for further interactions
with device drivers implementing dpll subsystem, as well as for
interactions of DPLL netlink framework part with the subsystem
itself.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a protocol spec for DPLL.
Add code generated from the spec.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation explaining common netlink interface to configure DPLL
devices and monitoring events. Common way to implement DPLL device in
a driver is also covered.
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
-queue
Tony Nguyen says:
====================
Support rx-fcs on/off for VFs
Ahmed Zaki says:
Allow the user to turn on/off the CRC/FCS stripping through ethtool. We
first add the CRC offload capability in the virtchannel, then the feature
is enabled in ice and iavf drivers.
We make sure that the netdev features are fixed such that CRC stripping
cannot be disabled if VLAN rx offload (VLAN strip) is enabled. Also, VLAN
stripping cannot be enabled unless CRC stripping is ON.
Testing was done using tcpdump to make sure that the CRC is included in
the frame after:
# ethtool -K <interface> rx-fcs on
and is not included when it is back "off". Also, ethtool should return an
error for the above command if "rx-vlan-offload" is already on and at least
one VLAN interface/filter exists on the VF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aananth V says:
====================
tcp: new TCP_INFO stats for RTO events
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch set adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
Patch 1 fixes a bug in TFO SYNACK that we encountered while testing
these new metrics.
Patch 2 adds the new metrics to tcp_sock and tcp_info.
v2: Addressed feedback from a check bot in patch 2 by removing the
inline keyword from the tcp_update_rto_time and tcp_update_rto_stats
functions. Changed a comment in include/net/tcp.h to fit under 80 words.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For passive TCP Fast Open sockets that had SYN/ACK timeout and did not
send more data in SYN_RECV, upon receiving the final ACK in 3WHS, the
congestion state may awkwardly stay in CA_Loss mode unless the CA state
was undone due to TCP timestamp checks. However, if
tcp_rcv_synrecv_state_fastopen() decides not to undo, then we should
enter CA_Open, because at that point we have received an ACK covering
the retransmitted SYNACKs. Currently, the icsk_ca_state is only set to
CA_Open after we receive an ACK for a data-packet. This is because
tcp_ack does not call tcp_fastretrans_alert (and tcp_process_loss) if
!prior_packets
Note that tcp_process_loss() calls tcp_try_undo_recovery(), so having
tcp_rcv_synrecv_state_fastopen() decide that if we're in CA_Loss we
should call tcp_try_undo_recovery() is consistent with that, and
low risk.
Fixes: dad8cea7add9 ("tcp: fix TFO SYNACK undo to avoid double-timestamp-undo")
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Oleksij Rempel says:
====================
net: dsa: microchip: add drive strength support
changes v5:
- rename milliamp to microamp
- do not expect negative error code on snprintf
- set coma after last struct element
- rename found to have_any_prop
changes v4:
- integrate microchip feedback to the ksz9477_drive_strengths comment.
- add Reviewed-by: Rob Herring <robh@kernel.org>
changes v3:
- yaml: use enum instead of min/max
- do not use snprintf() on overlapping buffer.
- unify ksz_drive_strength_to_reg() and ksz_drive_strength_error(). Make
it usable for KSZ9477 and KSZ8830 variants.
- use ksz_rmw8() in ksz9477_drive_strength_write()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device tree based drive strength configuration support. It is needed to
pass EMI validation on our hardware.
Configuration values are based on the vendor's reference driver.
Tested on KSZ9563R.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
strength
Extend device tree bindings to support drive strength configuration for the
ksz* switches. Introduced properties:
- microchip,hi-drive-strength-microamp: Controls the drive strength for
high-speed interfaces like GMII/RGMII and more.
- microchip,lo-drive-strength-microamp: Governs the drive strength for
low-speed interfaces such as LEDs, PME_N, and others.
- microchip,io-drive-strength-microamp: Controls the drive strength for
for undocumented Pads on KSZ88xx variants.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Introduce Intel IDPF driver
Pavan Kumar Linga says:
This patch series introduces the Intel Infrastructure Data Path Function
(IDPF) driver. It is used for both physical and virtual functions. Except
for some of the device operations the rest of the functionality is the
same for both PF and VF. IDPF uses virtchnl version2 opcodes and
structures defined in the virtchnl2 header file which helps the driver
to learn the capabilities and register offsets from the device
Control Plane (CP) instead of assuming the default values.
The format of the series follows the driver init flow to interface open.
To start with, probe gets called and kicks off the driver initialization
by spawning the 'vc_event_task' work queue which in turn calls the
'hard reset' function. As part of that, the mailbox is initialized which
is used to send/receive the virtchnl messages to/from the CP. Once that is
done, 'core init' kicks in which requests all the required global resources
from the CP and spawns the 'init_task' work queue to create the vports.
Based on the capability information received, the driver creates the said
number of vports (one or many) where each vport is associated to a netdev.
Also, each vport has its own resources such as queues, vectors etc.
From there, rest of the netdev_ops and data path are added.
IDPF implements both single queue which is traditional queueing model
as well as split queue model. In split queue model, it uses separate queue
for both completion descriptors and buffers which helps to implement
out-of-order completions. It also helps to implement asymmetric queues,
for example multiple RX completion queues can be processed by a single
RX buffer queue and multiple TX buffer queues can be processed by a
single TX completion queue. In single queue model, same queue is used
for both descriptor completions as well as buffer completions. It also
supports features such as generic checksum offload, generic receive
offload (hardware GRO) etc.
---
v7:
Patch 2:
* removed pci_[disable|enable]_pcie_error_reporting as they are dropped
from the core
Patch 4, 9:
* used 'kasprintf' instead of 'snprintf' to avoid providing explicit
character string size which also fixes "-Wformat-truncation" warnings
Patch 14:
* used 'ethtool_sprintf' instead of 'snprintf' to avoid providing explicit
character string size which also fixes "-Wformat-truncation" warning
* add string format argument to the 'ethtool_sprintf' to avoid warning on
"-Wformat-security"
v6: https://lore.kernel.org/netdev/20230825235954.894050-1-pavan.kumar.linga@intel.com/
Note: 'Acked-by' was only added to patches 1, 2, 12 and not to the other
patches because of the changes in v6
Patch 3, 4, 5, 6, 7, 8, 9, 11, 13, 14, 15:
* renamed 'reset_lock' to 'vport_ctrl_lock' to reflect the lock usage
* to avoid defensive programming, used 'vport_ctrl_lock' for the user
callbacks that access the 'vport' to prevent the hardware reset thread
from releasing the 'vport', when the user callback is in progress
* added some variables to netdev private structure to avoid vport access
if possible from ethtool and ndo callbacks
* moved 'mac_filter_list_lock' and MAC related flags to vport_config
structure and refactored mac filter flow to handle asynchronous
ndo mac filter callbacks
* stop the queues before starting the reset flow to avoid TX hangs
* removed 'sw_mutex' and 'stop_mutex' as they are not needed anymore
* added missing clear bit in 'init_task' error path
* renamed labels appropriately
Patch 8:
* replaced page_pool_put_page with page_pool_put_full_page
* for the page pool max_len, used PAGE_SIZE
Patch 10, 11, 13:
* made use of the 'netif_txq_maybe_stop', '__netif_txq_completed_wake'
helper macros
Patch 13:
* removed IDPF_HR_RESET_IN_PROG flag check in idpf_tx_singleq_start
as it is defensive
Patch 14:
* removed max descriptor check as the core does that
* removed unnecessary error messages
* removed the stats that are common between the ones reported by ethtool
and ip link
* replaced snprintf with ethtool_sprintf
* added a comment to explain the reason for the max queue check
* as the netdev queues are set on alloc, there is no need to set
them again on reset unless there is a queue change, so move the
'idpf_set_real_num_queues' to 'idpf_initiate_soft_reset'
Patch 15:
* reworded the 'configure SRIOV' in the commit message
v5: https://lore.kernel.org/netdev/20230816004305.216136-1-anthony.l.nguyen@intel.com/
Most Patches:
* wrapped line limit to 80 chars to those which don't effect readability
Patch 12:
* in skb_add_rx_frag, offset 'headlen' w.r.t page_offset when adding a
frag to avoid adding the header again
Patch 14:
* added NULL check for 'rxq' when dereferencing it in page_pool_get_stats
v4: https://lore.kernel.org/netdev/20230808003416.3805142-1-anthony.l.nguyen@intel.com/
Patch 1:
* s/virtcnl/virtchnl
* removed the kernel doc for the error code definitions that don't exist
* reworded the summary part in the virtchnl2 header
Patch 3:
* don't set local variable to NULL on error
* renamed sq_send_command_out label with err_unlock
* don't use __GFP_ZERO in dma_alloc_coherent
Patch 4:
* introduced mailbox workqueue to process mailbox interrupts
Patch 3, 4, 5, 6, 7, 8, 9, 11, 15:
* removed unnecessary variable 0-init
Patch 3, 5, 7, 8, 9, 15:
* removed defensive programming checks wherever applicable
* removed IDPF_CAP_FIELD_LAST as it can be treated as defensive
programming
Patch 3, 4, 5, 6, 7:
* replaced IDPF_DFLT_MBX_BUF_SIZE with IDPF_CTLQ_MAX_BUF_LEN
Patch 2 to 15:
* add kernel-doc for idpf.h and idpf_txrx.h enums and structures
Patch 4, 5, 15:
* adjusted the destroy sequence of the workqueues as per the alloc
sequence
Patch 4, 5, 9, 15:
* scrub unnecessary flags in 'idpf_flags'
- IDPF_REMOVE_IN_PROG flag can take care of the cases where
IDPF_REL_RES_IN_PROG is used, removed the later one
- IDPF_REQ_[TX|RX]_SPLITQ are replaced with struct variables
- IDPF_CANCEL_[SERVICE|STATS]_TASK are redundant as the work queue
doesn't get rescheduled again after 'cancel_delayed_work_sync'
- IDPF_HR_CORE_RESET is removed as there is no set_bit for this flag
- IDPF_MB_INTR_TRIGGER is removed as it is not needed anymore with the
mailbox workqueue implementation
Patch 7 to 15:
* replaced the custom buffer recycling code with page pool API
* switched the header split buffer allocations from using a bunch of
pages to using one large chunk of DMA memory
* reordered some of the flows in vport_open to support page pool
Patch 8, 12:
* don't suppress the alloc errors by using __GFP_NOWARN
Patch 9:
* removed dyn_ctl_clrpba_m as it is not being used
Patch 14:
* introduced enum idpf_vport_reset_cause instead of using vport flags
* introduced page pool stats
v3: https://lore.kernel.org/netdev/20230616231341.2885622-1-anthony.l.nguyen@intel.com/
Patch 5:
* instead of void, used 'struct virtchnl2_create_vport' type for
vport_params_recvd and vport_params_reqd and removed the typecasting
* used u16/u32 as needed instead of int for variables which cannot be
negative and updated in all the places whereever applicable
Patch 6:
* changed the commit message to "add ptypes and MAC filter support"
* used the sender Signed-off-by as the last tag on all the patches
* removed unnecessary variables 0-init
* instead of fixing the code in this commit, fixed it in the commit
where the change was introduced first
* moved get_type_info struct on to the stack instead of memory alloc
* moved mutex_lock and ptype_info memory alloc outside while loop and
adjusted the return flow
* used 'break' instead of 'continue' in ptype id switch case
v2: https://lore.kernel.org/netdev/20230614171428.1504179-1-anthony.l.nguyen@intel.com/
Patch 2:
* added "Intel(R)" to the DRV_SUMMARY and Makefile.
Patch 4, 5, 6, 15:
* replaced IDPF_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for the
adapter related virtchnl opcodes.
* get the mutex lock in the virtchnl send thread itself instead of
in receive thread.
Patch 5, 6, 7, 8, 9, 11, 14, 15:
* replaced IDPF_VPORT_VC_MSG_PENDING flag with mutex 'vc_buf_lock' for
the vport related virtchnl opcodes.
* get the mutex lock in the virtchnl send thread itself instead of
in receive thread.
Patch 6:
* converted get_ptype_info logic from 1:N to 1:1 message exchange for
better handling of mutex lock.
Patch 15:
* introduced 'stats_lock' spinlock to avoid concurrent stats update.
v1: https://lore.kernel.org/netdev/20230530234501.2680230-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Keguang Zhang says:
====================
Move Loongson1 MAC arch-code to the driver dir
In order to convert Loongson1 MAC platform devices to the devicetree
nodes, Loongson1 MAC arch-code should be moved to the driver dir.
Add dt-binding document and update MAINTAINERS file accordingly.
In other words, this patchset is a preparation for converting
Loongson1 platform devices to devicetree.
Changelog
V4 -> V5: Replace stmmac_probe_config_dt() with devm_stmmac_probe_config_dt()
Replace stmmac_pltfr_probe() with devm_stmmac_pltfr_probe()
Squash patch 4 into patch 2 and 3
V3 -> V4: Add Acked-by tag from Krzysztof Kozlowski
Add "|" to description part
Amend "phy-mode" property
Drop ls1x_dwmac_syscon definition and its instances
Drop three redundant fields from the ls1x_dwmac structure
Drop the ls1x_dwmac_init() method.
Update the dt-binding document entry of Loongson1 Ethernet
Some minor improvements
V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
and loongson,ls1c-emac.yaml (suggested by Serge Semin)
Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
Rename loongson,dwmac-syscon to loongson,ls1-syscon
Amend the title
Add description
Add Reviewed-by tag from Krzysztof Kozlowski
Change compatibles back to loongson,ls1b-syscon
and loongson,ls1c-syscon
Determine the device ID by physical
base address(suggested by Serge Semin)
Use regmap instead of regmap fields
Use syscon_regmap_lookup_by_phandle()
Some minor fixes
Update the entries of MAINTAINERS
V1 -> V2: Leave the Ethernet platform data for now
Make the syscon compatibles more specific
Fix "clock-names" and "interrupt-names" property
Rename the syscon property to "loongson,dwmac-syscon"
Drop "phy-handle" and "phy-mode" requirement
Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
to snps,dwmac.yaml
Fix the build errors due to CONFIG_OF being unset
Change struct reg_field definitions to const
Rename the syscon property to "loongson,dwmac-syscon"
Add MII PHY mode for LS1C
Improve the commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This glue driver is created based on the arch-code
implemented earlier with the platform-specific settings.
Use syscon for SYSCON register access.
And modify MAINTAINERS to add a new F: entry for this driver.
Partially based on the previous work by Serge Semin.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devicetree binding document for Loongson-1 Ethernet controller.
And modify MAINTAINERS to add a new F: entry for
Loongson1 dt-binding documents.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Loongson LS1B and LS1C compatibles for system controller.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow the style used in the core kernel (e.g.
include/linux/etherdevice.h and include/linux/in6.h) for the PTP IPv6
and Ethernet addresses. No functional changes.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check if wlan.offload_enable and wlan.offload_disable callbacks are set
in mtk_wed_flow_add/mtk_wed_flow_remove since mt7996 will not rely
on them.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can be time consuming to track driver bugs, that might be detected
too late from this confusing warning in skb_try_coalesce()
WARN_ON_ONCE(delta < len);
Add sanity check in skb_add_rx_frag() and skb_coalesce_rx_frag()
to better track bug origin for CONFIG_DEBUG_NET=y builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding sk->sk_prot->release_cb() call from __sk_flush_backlog()
Paolo suggested using indirect call helpers to take care of
CONFIG_RETPOLINE=y case.
It turns out Google had such mitigation for years in release_sock(),
it is time to make this public :)
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Indent this if statement one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
====================
net: Add Half Duplex support for ICSSG Driver
This series adds support for half duplex operation for ICSSG driver.
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG GPIO pin
(PRGx_PRU0/1_GPI10) so that firmware can detect collision signal and apply
the CSMA/CD algorithm applicable for half duplex operation. A DT property,
"ti,half-duplex-capable" is introduced for this purpose in the first patch
of the series. If board has PHY COL pin conencted to PRGx_PRU1_GPIO10,
this DT property can be added to eth node of ICSSG, MII port to support
half duplex operation at that port.
Second patch of the series configures driver to support half-duplex
operation if the DT property "ti,half-duplex-capable" is enabled.
This series addresses comments on [v2]. This series is based on the latest
net-next/main. This series has no dependency.
Changes from v1 to v2:
*) Changed the description of "ti,half-duplex-capable" property as asked
by Rob and Andrew to avoid confusion between capable and enable.
Changes from v1 to v2:
*) Dropped the RFC tag.
*) Added RB tags of Andrew and Roger.
[v1] https://lore.kernel.org/all/20230830113134.1226970-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230911060200.2164771-1-danishanwar@ti.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for half duplex operation at 10M and 100M link
speeds for AM654x/AM64x devices.
- Driver configures rand_seed, a random number, in DMEM HD_RAND_SEED_OFFSET
field, which will be used by firmware for Back off time calculation.
- Driver informs FW about half duplex link operation in DMEM
PORT_LINK_SPEED_OFFSET field by setting bit 7 for 10/100M HD.
Hence, the half duplex operation depends on board design the
"ti,half-duplex-capable" property has to be enabled for ICSS-G ports if HW
is capable to perform half duplex.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG
GPIO pin (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal
and apply the CSMA/CD algorithm applicable for half duplex operation. A DT
property, "ti,half-duplex-capable" is introduced for this purpose. If
board has PHY COL pin conencted to PRGx_PRU1_GPIO10, this DT property can
be added to eth node of ICSSG, MII port to support half duplex operation at
that port.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We auto-negotiate most ports in the RTL8366RB driver, but
the CPU port is hard-coded to 1Gbit, full duplex, tx and
rx pause.
This isn't very nice. People may configure speed and
duplex differently in the device tree.
Actually respect the arguments passed to the function for
the CPU port, which get passed properly after Russell's
patch "net: dsa: realtek: add phylink_get_caps implementation"
After this the link is still set up properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PTP block supports generating PPS output signal on GPIO pin. This patch
adds the support in the PTP PHC driver using standard periodic output
interface.
User can enable/disable/configure PPS by writing to the below sysfs entry
echo perout.index start.sec start.nsec period.sec period.nsec >
/sys/class/ptp/ptp0/period
Example to generate 50% duty cycle PPS signal:
echo 0 0 0 0 500000000 > /sys/class/ptp/ptp0/period
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
ipv6: round of data-races fixes
This series is inspired by one related syzbot report.
Many inet6_sk(sk) fields reads or writes are racy.
Move 1-bit fields to inet->inet_flags to provide
atomic safety. inet6_{test|set|clear|assign}_bit() helpers
could be changed later if we need to make room in inet_flags.
Also add missing READ_ONCE()/WRITE_ONCE() when
lockless readers need access to specific fields.
np->srcprefs will be handled separately to avoid merge conflicts
because a prior patch was posted for net tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->sndflow reads are racy.
Use one bit ftom atomic inet->inet_flags instead,
IPV6_FLOWINFO_SEND setsockopt() can be lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most np->pmtudisc reads are racy.
Move this 3bit field on a full byte, add annotations
and make IPV6_MTU_DISCOVER setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reads from np->rtalert_isolate are racy.
Move this flag to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move np->repflow to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->recverr is moved to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|