| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
|
|
Pull block fixes from Jens Axboe:
- Fix null_blk polled IO timeout handling (Chengming)
- Regression fix for swapped arguments in drbd bvec_set_page()
(Christoph)
- String length handling fix for s390 dasd (Heiko)
- Fixes for blk-throttle accounting (Yu)
- Fix page pinning issue for same page segments (Christoph)
- Remove redundant file_remove_privs() call (Christoph)
- Fix a regression in partition handling for devices not supporting
partitions (Li)
* tag 'block-6.6-2023-09-08' of git://git.kernel.dk/linux:
drbd: swap bvec_set_page len and offset
block: fix pin count management when merging same-page segments
null_blk: fix poll request timeout handling
s390/dasd: fix string length handling
block: don't add or resize partition on the disk with GENHD_FL_NO_PART
block: remove the call to file_remove_privs in blkdev_write_iter
blk-throttle: consider 'carryover_ios/bytes' in throtl_trim_slice()
blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()
blk-throttle: fix wrong comparation while 'carryover_ios/bytes' is negative
blk-throttle: print signed value 'carryover_bytes/ios' for user
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 6.6-rc merge window:
- Fix for a regression this merge window caused by the SQPOLL
affinity patch, where we can race with SQPOLL thread shutdown and
cause an oops when trying to set affinity (Gabriel)
- Fix for a regression this merge window where fdinfo reading with
for a ring setup with IORING_SETUP_NO_SQARRAY will attempt to
deference the non-existing SQ ring array (me)
- Add the patch that allows more finegrained control over who can use
io_uring (Matteo)
- Locking fix for a regression added this merge window for IOPOLL
overflow (Pavel)
- IOPOLL fix for stable, breaking our loop if helper threads are
exiting (Pavel)
Also had a fix for unreaped iopoll requests from io-wq from Ming, but
we found an issue with that and hence it got reverted. Will get this
sorted for a future rc"
* tag 'io_uring-6.6-2023-09-08' of git://git.kernel.dk/linux:
Revert "io_uring: fix IO hang in io_wq_put_and_exit from do_exit()"
io_uring: fix unprotected iopoll overflow
io_uring: break out of iowq iopoll on teardown
io_uring: add a sysctl to disable io_uring system-wide
io_uring/fdinfo: only print ->sq_array[] if it's there
io_uring: fix IO hang in io_wq_put_and_exit from do_exit()
io_uring: Don't set affinity on a dying sqpoll thread
|
|
There was a minor typo in the define for SMB2_GLOBAL_CAP_LARGE_MTU
0X00000004 instead of 0x00000004
make it consistent
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Eliminate an obsolete thermal zone registration function"
* tag 'thermal-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Drop thermal_zone_device_register()
thermal: Use thermal_tripless_zone_device_register()
thermal: core: Add function for registering tripless thermal zones
thermal: core: Clean up headers of thermal zone registration functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an Intel RAPL power capping driver regression introduced during
the 6.5 development cycle (Srinivas Pandruvada)"
* tag 'pm-6.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix invalid setting of Power Limit 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a regression in irqchip setup in gpio-zynq
* tag 'gpio-fixes-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks
|
|
This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.
d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.
But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.
Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.
Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 6.6-rc1. All small and easy ones.
- The corrections of the previous PCM iov_iter transitions
- Regression fixes in MIDI 2.0 / USB changes
- Various ASoC codec fixes for Cirrus, Realtek, WCD
- ASoC AMD quirks and ASoC Intel AVS driver workaround"
* tag 'sound-fix-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek - ALC287 I2S speaker platform support
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82TL
ASoC: Intel: avs: Provide support for fallback topology
ALSA: seq: Fix snd_seq_expand_var_event() call to user-space
ALSA: usb-audio: Fix potential memory leaks at error path for UMP open
ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs.
ASoC: rt5645: NULL pointer access when removing jack
ASoC: amd: yc: Add DMI entries to support Victus by HP Gaming Laptop 15-fb0xxx (8A3E)
MAINTAINERS: Update the MAINTAINERS enties for TEXAS INSTRUMENTS ASoC DRIVERS
ALSA: sb: Fix wrong argument in commented code
ALSA: pcm: Fix error checks of default read/write copy ops
ASoC: Name iov_iter argument as iterator instead of buffer
ASoC: dmaengine: Drop unused iov_iter for process callback
ALSA: hda/tas2781: Use standard clamp() macro
ASoC: cs35l56: Waiting for firmware to boot must be tolerant of I/O errors
ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc
ASoC: cs42l43: Fix missing error code in cs42l43_codec_probe()
ASoC: cs35l45: Rename DACPCM1 Source control
ASoC: cs35l45: Fix "Dead assigment" warning
ASoC: cs35l45: Add support for Chip ID 0x35A460
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is a fix for a broken strscpy() conversion that landed in
the merge window and broke early parsing of the kernel command line.
- Fix an incorrect mask in the CXL PMU driver
- Fix a regression in early parsing of the kernel command line
- Fix an IP checksum OoB access reported by syzbot"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
perf: CXL: fix mismatched number of counters mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Revert exporting symbols needed for dumping the raw printk buffer in
panic().
I pushed the export prematurely before the user was ready for merging
into the mainline.
* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: export symbols for debug modules"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
|
|
dependencies are met
To prevent randconfig build issues when enabling the RZ/Five SoC, consider
selecting specific configurations only when their dependencies are
satisfied.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901110936.313171-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is
enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to
avoid any build failures.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.
This avoids users to explicitly select MMU.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Puranjay Mohan <puranjay12@gmail.com> says:
Here is some data to prove the V2 fixes the problem:
Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m47.562s
user 0m24.145s
sys 6m37.064s
With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)
real 7m29.472s
user 0m25.865s
sys 6m18.401s
BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.
Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.
I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.
This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.
======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================
Test setup:
===========
Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1
To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.
The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.
The script was run with following perf command:
./run.sh "perf stat -a \
-e iTLB-load-misses \
-e dTLB-load-misses \
-e dTLB-store-misses \
-e instructions \
--timeout 60000"
The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.
The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.
Results
=======
Before enabling prog pack allocator:
------------------------------------
Performance counter stats for 'system wide':
4939048 iTLB-load-misses
5468689 dTLB-load-misses
465234 dTLB-store-misses
1441082097998 instructions
60.045791200 seconds time elapsed
After enabling prog pack allocator:
-----------------------------------
Performance counter stats for 'system wide':
3430035 iTLB-load-misses
5008745 dTLB-load-misses
409944 dTLB-store-misses
1441535637988 instructions
60.046296600 seconds time elapsed
Improvements in metrics
=======================
It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.
--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------
I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.
This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs
[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards
* b4-shazam-merge:
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
The following KASLR implementation allows to randomize the kernel mapping:
- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
hence the patch 3 factorizes KASLR related functions for riscv to take
advantage.
The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.
* b4-shazam-merge:
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.
* b4-shazam-merge:
RISC-V: Add ptrace support for vectors
Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
This patch series is a subset from Arnd's original series [0]. Ive just
picked up the bits required for RISC-V unification of cache flushing.
Remaining patches from the series [0] will be taken care by Arnd soon.
* b4-shazam-merge:
riscv: dma-mapping: switch over to generic implementation
riscv: dma-mapping: skip invalidation before bidirectional DMA
riscv: dma-mapping: only invalidate after DMA, not flush
Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Evan Green <evan@rivosinc.com> says:
The current setting for the hwprobe bit indicating misaligned access
speed is controlled by a vendor-specific feature probe function. This is
essentially a per-SoC table we have to maintain on behalf of each vendor
going forward. Let's convert that instead to something we detect at
runtime.
We have two assembly routines at the heart of our probe: one that
does a bunch of word-sized accesses (without aligning its input buffer),
and the other that does byte accesses. If we can move a larger number of
bytes using misaligned word accesses than we can with the same amount of
time doing byte accesses, then we can declare misaligned accesses as
"fast".
The tradeoff of reducing this maintenance burden is boot time. We spend
4-6 jiffies per core doing this measurement (0-2 on jiffie edge
alignment, and 4 on measurement). The timing loop was based on
raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number
of algorithms). By taking only the fastest iteration out of all
attempts for use in the comparison, variance between runs is very low.
On my THead C906, it looks like this:
[ 0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast
Several others have chimed in with results on slow machines with the
older algorithm, which took all runs into account, including noise like
interrupts. Even with this variation, results indicate that in all cases
(fast, slow, and emulated) the measured numbers are nowhere near each
other (always multiple factors away).
* b4-shazam-merge:
RISC-V: alternative: Remove feature_probe_func
RISC-V: Probe for unaligned access speed
Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This reverts commit 3fa6456ebe13adab3ba1817c8e515a5b88f95dce.
The Commit broke the CMA region creation through DT on arm64,
as showed below logs with "memblock=debug":
[ 0.000000] memblock_phys_alloc_range: 41943040 bytes align=0x200000
from=0x0000000000000000 max_addr=0x00000000ffffffff
early_init_dt_alloc_reserved_memory_arch+0x34/0xa0
[ 0.000000] memblock_reserve: [0x00000000fd600000-0x00000000ffdfffff]
memblock_alloc_range_nid+0xc0/0x19c
[ 0.000000] Reserved memory: overlap with other memblock reserved region
>From call flow, region we defined in DT was always reserved before entering
into rmem_cma_setup. Also, rmem_cma_setup has one routine cma_init_reserved_mem
to ensure the region was reserved. Checking the region not reserved here seems
not correct.
early_init_fdt_scan_reserved_mem:
fdt_scan_reserved_mem
__reserved_mem_reserve_reg
early_init_dt_reserve_memory
memblock_reserve(using “reg” prop case)
fdt_init_reserved_mem
__reserved_mem_alloc_size
*early_init_dt_alloc_reserved_memory_arch*
memblock_reserve(dynamic alloc case)
__reserved_mem_init_node
rmem_cma_setup(region overlap check here should always fail)
Example DT can be used to reproduce issue:
dump_mem: mem_dump_region {
compatible = "shared-dma-pool";
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
reusable;
size = <0 0x2800000>;
};
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
|
|
Pull drm fixes from Dave Airlie:
"Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three
weeks in one go, one i915, one nouveau and one ivpu.
I think there might be a few more fixes in misc that I haven't pulled
in yet, but we should get them all for rc2.
amdgpu:
- Display replay fixes
- Fixes for headless boards
- Fix documentation breakage
- RAS fixes
- Handle newer IP discovery tables
- SMU 13.0.6 fixes
- SR-IOV fixes
- Display vstartup fixes
- NBIO 7.9 fixes
- Display scaling mode fixes
- Debugfs power reporting fix
- GC 9.4.3 fixes
- Dirty framebuffer fixes for fbcon
- eDP fixes
- DCN 3.1.5 fix
- Display ODM fixes
- GPU core dump fix
- Re-enable zops property now that IGT test is fixed
- Fix possible UAF in CS code
- Cursor degamma fix
amdkfd:
- HMM fixes
- Interrupt masking fix
- GFX11 MQD fixes
i915:
- Mark requests for GuC virtual engines to avoid use-after-free
nouveau:
- Fix fence state in nouveau_fence_emit()
ivpu:
- replace strncpy"
* tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits)
drm/amdgpu: Restrict bootloader wait to SMUv13.0.6
drm/amd/display: prevent potential division by zero errors
drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma
drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1
Revert "drm/amd/display: Remove v_startup workaround for dcn3+"
drm/amdgpu: fix amdgpu_cs_p1_user_fence
Revert "Revert "drm/amd/display: Implement zpos property""
drm/amdkfd: Add missing gfx11 MQD manager callbacks
drm/amdgpu: Free ras cmd input buffer properly
drm/amdgpu: Hide xcp partition sysfs under SRIOV
drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting
drm/amdkfd: use mask to get v9 interrupt sq data bits correctly
drm/amdgpu: Allocate coredump memory in a nonblocking way
drm/amdgpu: Support query ecc cap for aqua_vanjaram
drm/amdgpu: Add umc_info v4_0 structure
drm/amd/display: always switch off ODM before committing more streams
drm/amd/display: Remove wait while locked
drm/amd/display: update blank state on ODM changes
drm/amd/display: Add smu write msg id fail retry process
drm/amdgpu: Add SMU v13.0.6 default reset methods
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.6-2023-09-06:
amdgpu:
- Display replay fixes
- Fixes for headless boards
- Fix documentation breakage
- RAS fixes
- Handle newer IP discovery tables
- SMU 13.0.6 fixes
- SR-IOV fixes
- Display vstartup fixes
- NBIO 7.9 fixes
- Display scaling mode fixes
- Debugfs power reporting fix
- GC 9.4.3 fixes
- Dirty framebuffer fixes for fbcon
- eDP fixes
- DCN 3.1.5 fix
- Display ODM fixes
- GPU core dump fix
- Re-enable zops property now that IGT test is fixed
- Fix possible UAF in CS code
- Cursor degamma fix
amdkfd:
- HMM fixes
- Interrupt masking fix
- GFX11 MQD fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230907033049.7811-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Mark requests for GuC virtual engines to avoid use-after-free (Andrzej).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZPEGEeP2EwCtx9hM@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device"
* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix probe failure when no i3c device exist
i3c: master: Fix SETDASA process
dt-bindings: i3c: Fix description for assigned-address
i3c: master: svc: Describe member 'saved_regs'
i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
i3c: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due
to a misreading of the datasheet"
* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Fix random kernel crash
regulator: tps6287x: Fix n_voltages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
single byte width all the time is *hopefully* excessively cautious but
it's unclear which SoCs are affected so the fix just covers everything
for safety"
* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
spi: sun6i: reduce DMA RX transfer width to single byte
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* ivpu: Replace strncpy
* nouveau: Fix fence state in nouveau_fence_emit()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901070123.GA6987@linux-uq9g
|
|
enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().
Fixes: f0168042a212 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a.
Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.
Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- A couple of virtual vs physical address confusion fixes
- Rework locking in dcssblk driver to address a lockdep warning
- Remove support for "noexec" kernel command line option since there is
no use case where it would make sense
- Simplify kernel mapping setup and get rid of quite a bit of code
- Add architecture specific __set_memory_yy() functions which allow us
to modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows using them
without the usual casts, and also to use them on areas larger than
8TB.
Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).
This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address this
for now with the __set_memory_yy() variant, and address common code
later
- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling
- Remove unused lsi_mask from airq_struct
- Add warning for invalid kernel mapping requests
* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmem: do not silently ignore mapping limit
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
s390/zcrypt: don't leak memory if dev_set_name() fails
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
s390/airq: remove lsi_mask from airq_struct
s390/mm: use __set_memory() variants where useful
s390/set_memory: add __set_memory() variant
s390/set_memory: generate all set_memory() functions
s390/mm: improve description of mapping permissions of prefix pages
s390/amode31: change type of __samode31, __eamode31, etc
s390/mm: simplify kernel mapping setup
s390: remove "noexec" option
s390/vmem: fix virtual vs physical address confusion
s390/dcssblk: fix lockdep warning
s390/monreader: fix virtual vs physical address confusion
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: TXx9: Do PCI error checks on own line
arch/mips/configs/*_defconfig cleanup
MIPS: VDSO: Conditionally export __vdso_gettimeofday()
Mips: loongson3_defconfig: Enable ast drm driver by default
mips: remove <asm/export.h>
mips: replace #include <asm/export.h> with #include <linux/export.h>
mips: remove unneeded #include <asm/export.h>
MIPS: Loongson64: Fix more __iomem attributes
MIPS: loongson32: Remove regs-rtc.h
MIPS: loongson32: Remove regs-clk.h
MIPS: More explicit DT include clean-ups
MIPS: Fixup explicit DT include clean-up
Revert MIPS: Loongson: Fix build error when make modules_install
MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
MIPS: Explicitly include correct DT includes
|
|
Pull xtensa updates from Max Filippov:
- enable MTD XIP support
- fix base address of the xtensa perf module in newer hardware
* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add XIP-aware MTD support
xtensa: PMU: fix base address for the newer hardware
|
|
Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb(). But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super(). Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.
Fixes: a4f64a300a29 ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.
This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path. Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.
This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call. But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.
Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86). But it's still quite a bit
faster than actually looking up the path for real.
To quote numers from Mateusz:
"Sapphire Rapids, will-it-scale, ops/s
stock fstat 5088199
patched fstat 7625244 (+49%)
real fstat 8540383 (+67% / +12%)"
where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.
Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit b484a40dc1f16edb58e5430105a021e1916e6f27.
This commit cancels all requests with io-wq, not just the ones from the
originating task. This breaks use cases that have thread pools, or just
multiple tasks issuing requests on the same ring. The liburing
regression test for this also shows that problem:
$ test/thread-exit.t
cqe->res=-125, Expected 512
where an IO thread gets its request canceled rather than complete
successfully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
[ 71.490669] WARNING: CPU: 3 PID: 17070 at io_uring/io_uring.c:769
io_cqring_event_overflow+0x47b/0x6b0
[ 71.498381] Call Trace:
[ 71.498590] <TASK>
[ 71.501858] io_req_cqe_overflow+0x105/0x1e0
[ 71.502194] __io_submit_flush_completions+0x9f9/0x1090
[ 71.503537] io_submit_sqes+0xebd/0x1f00
[ 71.503879] __do_sys_io_uring_enter+0x8c5/0x2380
[ 71.507360] do_syscall_64+0x39/0x80
We decoupled CQ locking from ->task_complete but haven't fixed up places
forcing locking for CQ overflows.
Fixes: ec26c225f06f5 ("io_uring: merge iopoll and normal completion paths")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.
Fixes: 561fb04a6a225 ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 3e00123a13d824d63072b1824c9da59cd78356d9.
No, we never export random symbols for out of tree modules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230905081902.321778-1-hch@lst.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.6
A bunch of fixes and new IDs that came in since the initial pull request
- all driver specific and nothing too exciting.
There's a trivial conflict in the AMD driver ID table due to the last
v6.5 fixes not having been merged up.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:
First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.
2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.
3rd patch adds a missing enum description, from Phil Sutter.
4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress. Fix from Pablo Neira Ayuso.
Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.
Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.
netfilter pull request 2023-09-06
* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================
Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:
| BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
|
| CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
| Call trace:
| dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
| show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
| __dump_stack lib/dump_stack.c:88 [inline]
| dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
| print_address_description mm/kasan/report.c:351 [inline]
| print_report+0x174/0x514 mm/kasan/report.c:462
| kasan_report+0xd4/0x130 mm/kasan/report.c:572
| kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
| __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
| do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| csum_partial+0x30/0x58 lib/checksum.c:128
| gso_make_checksum include/linux/skbuff.h:4928 [inline]
| __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
| udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
| ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
| skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
| __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
| skb_gso_segment include/linux/netdevice.h:4859 [inline]
| validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
| validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
| sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
| __dev_xmit_skb net/core/dev.c:3805 [inline]
| __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
| dev_queue_xmit include/linux/netdevice.h:3085 [inline]
| packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
| packet_snd net/packet/af_packet.c:3081 [inline]
| packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
| sock_sendmsg_nosec net/socket.c:724 [inline]
| sock_sendmsg net/socket.c:747 [inline]
| __sys_sendto+0x3b4/0x538 net/socket.c:2144
Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine")
Reported-by: syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
